All classic cement products with Essroc s quality assurance and know-how. New Look. Same Great Product.
|
|
- Buck Thornton
- 6 years ago
- Views:
Transcription
1 All classic cement products with Essroc s quality assurance and know-how New Look. Same Great Product.
2 i.nova Meet the i.nova Families of Performance: Fundamental to Italcementi s i.nova global branding system are the Families of Performance. Each Family represents a performance sector, includes multiple traditional Product Names, and is supported with its own Key Color and Symbol of Performance.
3 All Products classic for cement highly products aesthetic with purposes: Essroc s quality architectural, assurance design, and artistic know-how applications Available in Type N and Type S
4 Specifications i.design Colored Masonry Cement PRODUCT DESCRIPTION: i.design flamingo-brixment Masonry conforms to the requirements of ASTM C 91. Type N is in 70 lbs. bags and Type S is in 75 lbs. bags. APPLICATIONS: i.design flamingo-brixment Masonry should be mixed with 2 ¼ to 3 cubic feet of sand according to Table 1 of ASTM C 270. Start the mixer, place ¾ of the required amount of water, ½ the required amount of sand and all the i.design flamingo-brixment Masonry into the mixer. Mix briefly. Add the remaining sand and water to the mixer and mix for a minimum of 3 and a maximum of 5 minutes after the last mix water has been added. Although minor retempering is allowed, mortar should be used or discarded after 90 minutes. Mortar joints should be tooled when the surface is thumb-print hard. For more information, call: ESSROC Essroc essroc.com
5 All Products classic for cement highly products aesthetic with purposes: Essroc s quality architectural, assurance design, and artistic know-how applications Available in Type N and Type S
6 Specifications i.design Colored Portland & Lime Mix PRODUCT DESCRIPTION: i.design flamingo-brixment PCL conforms to the requirements of ASTM C 150 and ASTM C 207. Type N is in 70 lbs. bags and Type S is in 75 lbs. bags. APPLICATIONS: i.design flamingo-brixment PCL should be mixed with 2 ¼ to 3 cubic feet of sand according to Table 1 of ASTM C 270. Start the mixer, place ¾ of the required amount of water, ½ the required amount of sand and all the i.design flamingo-brixment PCL into the mixer. Mix briefly. Add the remaining sand and water to the mixer and mix for a minimum of 3 and a maximum of 5 minutes after the last mix water has been added. Although minor retempering is allowed, mortar should be used or discarded after 90 minutes. Mortar joints should be tooled when the surface is thumb-print hard. For more information, call: ESSROC Essroc essroc.com
7 All Products classic for cement highly products aesthetic with purposes: Essroc s quality architectural, assurance design, and artistic know-how applications Available in Type N and Type S
8 Specifications i.design Colored Mortar Cement PRODUCT DESCRIPTION: i.design flamingo-brixment Mortar Cement with Easy-Spred conforms to the requirements of ASTM C Type N is in 60 lbs. bags and Type S is in 65 lbs. bags. APPLICATIONS: i.design flamingo-brixment Mortar Cement with Easy-Spred should be mixed with 2 ¼ to 3 cubic feet of sand according to Table 1 of ASTM C 270. Start the mixer, place ¾ of the required amount of water, ½ the required amount of sand and all the i.design flamingo BRIXMENT Mortar Cement with Easy-Spred into the mixer. Mix briefly. Add the remaining sand and water to the mixer and mix for a minimum of 3 and a maximum of 5 minutes after the last mix water has been added. Although minor retempering is allowed, mortar should be used or discarded after 90 minutes. Mortar joints should be tooled when the surface is thumb-print hard. For more information, call: ESSROC Essroc essroc.com
9 For more information, MSDS s, and product data sheets, visit For more information on the Families of Performance, visit essroc.com ESSROC
10 All classic cement products with Essroc s quality assurance and know-how i.work i.pro i.tech i.design essroc.com ESSROC
All classic cement products with Essroc s quality assurance and know-how. New Look. Same Great Product.
All classic cement products with Essroc s quality assurance and know-how New Look. Same Great Product. i.nova Meet the i.nova Families of Performance: Fundamental to Italcementi s i.nova global branding
More informationMagna Wall. Mortar Cement Type N. Product Overview, Instructions, & Data. Durable A HEADWATERS COMPANY
Magna Wall Mortar Cement Type N Product Overview, Instructions, & Data Durable Famed Roman structures, such as the Pantheon, Colosseum and aqueducts, are still standing today. One secret to the long-term
More informationMagna Wall. Scratch and Brown with Fiber. Product Overview, Instructions, & Data. Durable
Magna Wall Scratch and Brown with Fiber Product Overview, Instructions, & Data Durable Famed Roman structures, such as the Pantheon, Colosseum and aqueducts, are still standing today. One secret to the
More informationMagna Wall. Mortar Cement Type S. Product Overview, Instructions, & Data. Durable
Magna Wall Mortar Cement Type S Product Overview, Instructions, & Data Durable Famed Roman structures, such as the Pantheon, Colosseum and aqueducts, are still standing today. One secret to the long-term
More informationEffective Mortar Specifications. Jamie Farny PCA Market Manager Buildings June 24, 2015
Effective Mortar Specifications Jamie Farny PCA Market Manager Buildings June 24, 2015 4 Learning Objectives 1. Name the three most common ASTM C270 mortar designations and how to select the appropriate
More informationMagna Wall. PA Mortar Mix. (Add Sand, Water and Portland) Product Overview, Instructions, & Data. Durable
Magna Wall PA Mortar Mix (Add Sand, Water and Portland) Product Overview, Instructions, & Data Durable Famed Roman structures, such as the Pantheon, Colosseum and aqueducts, are still standing today. One
More informationMagna Wall. Mason s Portland Cement 1P. Product Overview, Instructions, & Data. Durable A HEADWATERS COMPANY MASONRY
Magna Wall Mason s Product Overview, Instructions, & Data Durable Famed Roman structures, such as the Pantheon, Colosseum and aqueducts, are still standing today. One secret to the long-term durability
More informationMANUFACTURER S SPECIFICATIONS Section LIMESTONE PLASTER
MANUFACTURER S SPECIFICATIONS Section 09220 LIMESTONE PLASTER LE DÉCOR LIMESTONE PART 1 GENERAL 1.1 General A. This section describes the requirements for furnishing and installing Limestone Plaster. 1.2
More informationSECTION MASONRY GROUTING
SECTION 04 05 16 MASONRY GROUTING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Grout
More informationMASONRY MORTARING
2025 Centre Pointe Blvd. Suite 260 Mendota Heights, MN 55120 Phone: (888) 773-2649 (651) 994-7120 Fax: (888) 329-7732 E-mail: info@specmix.com www.specmix.com This MANU-SPEC utilizes the Construction Specifications
More informationSECTION BRICK FLOORING
SECTION 09 63 13 BRICK FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brick flooring
More informationB. Related Sections include: 1. Division 2, Section , Miscellaneous Cast-in-Place Concrete 2. Division 9, Section , Stone Paving
SECTION 04 43 00 - STONE VENEER WALLS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following applications: 1. Stone Veneer on Cast-in-Place Concrete retaining walls, 2. Stone Veneer on CMU
More informationSECTION MORTAR
PART l - SCOPE SECTION 04100 - MORTAR A. This Section includes all labor, materials, equipment, and related items required for the work of mortar as shown on the Drawings and specified herein. The work
More informationHammerStone Manufactured stone veneers for commercial & residential applications
HammerStone Manufactured stone veneers for commercial & residential applications Veneer Stone Specification Guide Section 04711: Manufactured Stone Veneer Use this specification guide for each individual
More informationParagraph Description Page No General Materials Concrete Masonry Work Altitude Valve Vault Cover 25-4
City of Columbia Engineering Regulations PART 25: SPECIFICATIONS FOR ALTITUDE VALVE VAULT Table of Contents Paragraph Description Page No. 25.1 General 25-1 25.2 Materials 25-1 25.3 Concrete Masonry Work
More informationBuildingName The Description of the Project P DOCUMENTS
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
More informationBESSEr BLOCK & BrICK SOUTH QUEENSLAND
Besser BLOCK & BRICK SOUTH QUEENSLAND Block - 100mm Series Standard 10.01 144 109 9.2 Three Quarter 10.02 192 144 6.9 Half 10.03 360 221 4.5 L-Shape Corner Return 10.25 120 85 11.8 Full Solid 10.31 108
More informationSECTION UNIT PAVERS
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Concrete pavers. 2. Detectable warning pavers. 3. Warning stripe pavers. 1.2 SUBMITTALS A. Product Data: For the following: 1. Pavers.
More informationMANUFACTURER S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON HEMPCRETE
MANUFACTURER S SPECIFICATIONS Section 09225 ST. ASTIER LIME PLASTER (NHL) PLASTER ON HEMPCRETE ST. ASTIER NATURAL HYDRAULIC LIME PLASTER PART 1 GENERAL 1.1 Summary A. This Section includes three (3) coat
More informationLast Modified: Jun 15, 2016 degruchy's Ecologic Mortar... Just add water!
Last Modified: Jun 15, 216 degruchy's Ecologic Mortar... Just add water! degruchy's Ecologic Mortar, in any of the stock colors, are simply a prepared blend of binder/aggregate/pigments to which you just
More informationBest Management Standards / Specifications. For Concrete Slab Raising. Prepared in conjunction with the Concrete Repair Association
For Concrete Slab Raising Prepared in conjunction with the Concrete Repair Association DETAILED SPECIFICATIONS 1. Description: 2. Slab Raising: These specifications cover the furnishing, boring, drilling,
More informationSPECIAL SPECIFICATION 2042 Decorative Colored Pattern Concrete Paving
2004 Specifications CSJ 0196-02-120 SPECIAL SPECIFICATION 2042 Decorative Colored Pattern Concrete Paving 1. Description. This Item shall govern for the furnishing and placing of colored concrete wave
More informationSECTION UNIT MASONRY
SECTION 04200 UNIT MASONRY PART 1 GENERAL 1.01 SUMMARY A. Furnish labor, materials, and equipment and perform functions required in the installation and maintenance of the work covered by this Section.
More informationNorth / Garage Door Side of Building: Complete grind, top to bottom and re-mortar.
BAYFIELD COUNTY, WI REQUEST FOR PROPOSALS BAYFIELD COUNTY MAINENANCE GARAGE TUCKPOINTING PROJECT Due May 23, 2014 117 E Fifth Street, PO 878 Washburn, WI 54891 Bayfield County is accepting proposals for
More informationMANUFACTURER'S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE
MANUFACTURER'S SPECIFICATIONS Section 09225 ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE ST. ASTIER NATURAL HYDRAULIC LIME PLASTER PART 1 GENERAL 1.1 Summary A. This Section includes St. Astier Natural
More information1.5-Hour Fire Rating. Assembly Information
1.5-Hour Fire Rating 6 C.M.U. Assembly Information 1. Preferred product 910350 c.m.u. 6" x 8" x 16" nominal 2. Portland cement stucco - 1/2" thick applied directly to C.M.U. 3. ASTM C-270 Masonry Mortar,
More informationConditions of the Contract and Division 1 General Requirements are a part of this section.
NOTES TO SPECIFIER General notes about the specifications and the reasons for them are listed here in general statements. Use this as a guide when choosing the correct selection of statements that apply
More informationDrilling of grout holes will be measured for payment on the basis of the linear feet of holes actually drilled.
I - Measurement and payment Mobilization and Demobilization: Payment will be made for costs for assembling all plant and equipment at the site preparatory to initiating the work and for removing it there
More informationSubmittal Transmittal
Commonwealth Engineers, Inc. 7256 Company Drive Indianapolis IN 46237 United States Submittal Transmittal PROJECT: Waynetown - Water-Strmwtr Imprv-Div A J13046-A DATE SENT: 9/23/2016 SUBJECT: DS-22-12_Masonry
More informationLuc Genest Sales Manager
THE RESTORATION OF THE MASONRY PILLARS OF THE JACQUES CARTIER BRIDGE Luc Genest Sales Manager HOW TO GET ACCESS TO MONTREAL? TRAIN TUNNEL SUBWAY BRIDGE 1 AGENDA History of the bridge The problems, the
More informationBy CTS Cement Manufacturing Corp.
CSI SECTION 03 60 00 GROUTING 03 62 00 NON-SHRINK GROUTING 03 62 13 NON-METALLIC NON-SHRINK GROUTING High Flow, Non-Metallic, Multi-Purpose, Cementitious, Non-Shrink Grout EDITOR NOTE: The following guideline
More informationContinuous Moisture Protection
Continuous Moisture Protection RainBloc Integrated Water Repellent System ECHELON MASONRY + AMERIMIX MORTAR powered by RainBloc technology Protect your Buildings from the Test of Time and Moisture Mold.
More informationMANUFACTURER S SPECIFICATIONS SECTION EXTERIOR-INTERIOR LIME PLASTER
LE DECOR LIMEPLASTER MANUFACTURER S SPECIFICATIONS SECTION 09220 EXTERIOR-INTERIOR LIME PLASTER PART I - GENERAL 1.1 General A. This is a manufacturer s short form specification. Contact TransMineral USA,
More information3-Hour Fire Rating. Assembly Information
3-Hour Fire Rating 6 C.M.U. Assembly Information 1. Preferred product 910330 c.m.u. 6" x 8" x 16" nominal 2. Portland cement stucco - 1/2" thick applied directly to C.M.U. 3. Wood or steel furring members
More informationINTEGRALLY COLORED CONCRETE [DECORATIVE CONCRETE PAVING]
Note to Specifier: The Admixture Systems business of BASF Corporation previously conducted business as Degussa Admixtures, Inc. and Master Builders, Inc. BASF has launched the Master Builders Solutions
More informationSECTION PORTLAND CEMENT PLASTERING
SECTION 09 2400 PORTLAND CEMENT PLASTERING This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be
More informationSECTION MANUFACTURED MASONRY
SECTION 047000 MANUFACTURED MASONRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationfor Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Mortar-Set Concrete Tiling Installations Large Scale CalArc Pavers are part of the California Architectural
More informationPILL AR OF THE INDUSTRY
PILL AR OF THE INDUSTRY CONTENT TABLE INTRODUCTION Presentation BEDDING MORTARS HLM-500 (Hydraulic Lime) RosenMix 500 (Natural Cement) PHL-500 (Pozzolanic lime) MasonMix (Complete series) REPOINTING MORTARS
More informationSECTION Vitrified Clay Wall Coping 2014
SECTION 04220 2014 PART 1 GENERAL 1.1 DESCRIPTION A. SCOPE OF WORK 1. Provide new coping as indicated on Drawings. B. RELATED SECTIONS 1. Section 02050: Selective Demolition. 2. Section 07650: Metal Flashing.
More informationSECTION UNIT MASONRY ASSEMBLIES
PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Concrete masonry units. 2. Decorative masonry units. 3. Mortar and grout. 4. Steel reinforcing bars. 5. Masonry joint reinforcement. 6. Ties and anchors.
More informationBESSER BLOCK & BRICK TASMANIA
BESSER BLOCK & BRICK TASMANIA Products Description Code No. per Pallet Block - 100mm Series Regular 10.01 156 86 11.66 195 147 6.8 Three Quarter 10.02 260 115 8.7 2 312 196 5.1 312 182 5.5 Half 10.03 390
More informationA. Section includes historic treatment work consisting of rep ointing brick masonry as follows:
SECTION 040323 - HISTORJC BRlCK UNIT MASONRY REPOINTING PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION BRICK MASONRY ASSEMBLIES
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Face brick. 2. Mortar and grout. 3. Ties and anchors. 4. Miscellaneous masonry accessories. 1.2 SUBMITTALS A. Product Data: For each type
More informationREINFORCED CONCRETE MASONRY SECTION
SECTION 04 22 02 - REINFORCED CONCRETE MASONRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 01 Specification
More informationTECHNICAL ADVISORY NOTE Basic Guide for Installing Molded Brick
700 Tuscarawas Street West Canton, OH 44701 (330) 456-0031 15718 Clear Spring Road Williamsport, MD 21795 (301) 223-7700 TECHNICAL ADVISORY NOTE Basic Guide for Installing Molded Brick Molded brick have
More informationSECTION INSTALLATION AND/OR REPLACEMENT OF MASONRY UNITS AND REPOINTING
SECTION 04210 INSTALLATION AND/OR REPLACEMENT OF MASONRY UNITS AND REPOINTING PART I GENERAL 1.1 SUMMARY A. Provide installation of new or replacement of masonry units and/or repointing of masonry units
More informationNarrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: Narrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations Narrow Modular Pavers are part of the California Architectural
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32353-0 SOUTH AFRICAN NATIONAL STANDARD Concrete roofing tiles WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSECTION 706 AGGREGATES FOR PORTLAND CEMENT PRODUCTS SCOPE
706 706.01.01 MATERIALS COVERED SECTION 706 AGGREGATES FOR PORTLAND CEMENT PRODUCTS SCOPE A. This specification covers the quality and size of aggregates used in Portland cement products. 706.02.01 GENERAL
More informationPROGRAM COMMENT FOR DEPARTMENT OF DEFENSE REHABILITATION TREATMENT MEASURES
PROGRAM COMMENT FOR DEPARTMENT OF DEFENSE REHABILITATION TREATMENT MEASURES APPENDIX 1 SECTION 04100.01 REMOVAL OF MORTAR JOINTS AND REPOINTING PART 1 GENERAL 1.01 DESCRIPTION A. This specification provides
More informationNarrow Modular Pavers (NMP) for Sand-Set Installations
The following specification refers to the Stepstone, Inc. product known as: Narrow Modular Pavers (NMP) for Sand-Set Installations Narrow Modular Pavers are part of the California Architectural Paver line
More informationBuilding Pathology: Masonry University of Oregon Historic Preservation Program
1 Building Pathology: Masonry University of Oregon Historic Preservation Program AAAP 410: CRN 32653, and AAAP 510: CRN 32656 4 Credits Shannon Sardell, Instructor ssardell@uoregon.edu (541) 954-8188 Final
More information1. Repairing brick masonry, including replacing damaged units as indicated on drawings. 2. Repointing mortar joints.
SECTION 040120 BRICK MASONRY REPAIR AND REPOINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION CERAMIC TILE. B. Ceramic tile wall finishes including standard and custom designs.
SECTION 09 30 13 CERAMIC TILE PART 1 GENERAL 1.1 SECTION INCLUDES A. Ceramic tile floor and base finishes. B. Ceramic tile wall finishes including standard and custom designs. 1.2 REFERENCES A. ANSI/TCNA
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MORTAR AND MASONRY GROUT
SECTION 04110 MORTAR AND MASONRY GROUT PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. In the absence of other information, the methods and recommendations of the National Concrete Masonry Association
More informationITEM 421 STRUCTURAL CONCRETE
AFTER FEBRUARY 1, 2011 ITEM 421 STRUCTURAL CONCRETE 421.1 Description. These specifications shall govern for the materials used; for the storing, measuring and handling of materials and for the proportioning
More informationSo, to make 24kg of mortar then can use 3kg of lime 15kg of sand 3 litres of water. And this ratio can be written as 3 : 3 : 15 : 3
Ratio Mixing different mortars is a vital part of bricklaying. A mortar is normally made by mixing together quantities of cement, lime, sand and water. The relationship between these components is very
More information1 Exam Prep Guide to Shotcrete Questions
1 Exam Prep Guide to Shotcrete Questions 1. According to Guide to Shotcrete, another name used for dry mix shotcrete is: A. batching B. gunite C. shotcrete D. slugging 2. Shotcrete in which all of the
More informationMANUFACTURER S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) MASONRY [BLOCKS] [BRICKS] [STONE]
MANUFACTURER S SPECIFICATIONS Section 09225 ST. ASTIER LIME PLASTER (NHL) MASONRY [BLOCKS] [BRICKS] [STONE] ST. ASTIER NATURAL HYDRAULIC LIME PLASTER PART 1 GENERAL 1.1 Summary A. This Section includes
More informationCONCRETE MASONRY UNITS Sizes & Shapes Manual
Our mission is to be the supplier of choice that provides the highest quality of construction products and services for our valued customers. CONCRETE MASONRY UNITS Sizes & Shapes Manual ESTIMATING GUIDES
More informationConstruction Masonry-Block
Job Ready Assessment Blueprint Construction Masonry-Block Test Code: 3025 / Version: 01 Measuring What Matters Specific Competencies and Skills Tested in this Assessment: Hand and Power Tools Identify
More informationA. Drawings and general provisions of the contract, including General and Supplementary Conditions, apply to this section.
Product Specification for: Rapid Set DOT Repair Mix SECTION 03 01 30 MAINTENANCE OF CAST-IN-PLACE CONCRETE SECTION 03 01 40 MAINTENANCE OF PRECAST CONCRETE SECTION 03 01 50 MAINTENANCE OF CAST DECKS AND
More informationKinds of Mortars. Mortar. Specifying Mortar. Proportion Specifications. M a S o N w O r K. Specification for Mortar Cement
ASTM C9 ASTM C44 ASTM C270 ASTM C780 ASTM C329 ASTM C586 Mortar Specification for Masonry Specification for Aggregate for Masonry Mortar Specification for Mortar for Unit Masonry Method for Preconstruction
More informationSECTION WALL AND DOOR PROTECTION
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 26 00 WALL AND DOOR PROTECTION SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable to
More information1 Exam Prep Concrete Masonry Handbook Questions and Answers
1 Exam Prep Concrete Masonry Handbook Questions and Answers 1. According to Concrete Masonry Handbook, a masonry unit is considered as normal weight if it has a density or unit weight of more than pounds
More informationSECTION PORTLAND CEMENT CONCRETE PAVEMENT. All subsurface utilities must be inspected, tested, and accepted prior to any paving.
SECTION PORTLAND CEMENT CONCRETE PAVEMENT 1. DESCRIPTION This specification shall govern for the construction of Portland cement concrete pavement on a prepared subgrade or base course, in accordance with
More informationMANUFACTURER S SPECIFICATION
MANUFACTURER S SPECIFICATION Eldorado Stone Corporation PO Box 489 Carnation, WA 98014 Tel: (800) 925-1491 Fax: (425) 333-4755 e-mail: general@eldoradostone.com website: www.eldoradostone.com SECTION 04730
More informationMOUNTAIN STONE Products
MOUNTAIN STONE Products PRODUCT USERS GUIDE Mountain Stone Products P.O. Box 20308 42102 4301 Industrial Road Bowling Green, KY. 42101 (270) 796-6123 (270) 796-6131 (800) 781-0277 Local Fax Nationwide
More informationSpec Master 5/7/ For each product requiring color and texture selection, provide full size samples.
SECTION 04812 (042012) MECHANICALLY ATTACHED BRICK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationEditing notes to assist users are separated from specification text by rows of asterisks. Delete these notes prior to final printing.
SECTION 09635 LIMESTONE FLOORING This guide specification has been prepared by TexaStone Quarries LLC to assist design professionals in the preparation of a specification section covering cut limestone
More informationSECTION 44 SHOTCRETE, CAST CONCRETE CHANNEL LINING, AND GROUTED COBBLE TABLE OF CONTENTS
SECTION 44 SHOTCRETE, CAST CONCRETE CHANNEL LINING, AND GROUTED COBBLE TABLE OF CONTENTS Section Page 44-1 SHOTCRETE... 44.1 44-1.01 Description... 44.1 44-1.02 Materials... 44.1 44-1.03 Proportions...
More informationDIVISION 3 CONCRETE Section Grouts
Spec Component: SC-207-03/10 SikaGrout 328 DIVISION 3 CONCRETE Section 03600 - Grouts Part 1 General 1.01 Summary A. This specification describes grouting of machinery base plates, anchor bolts, pins and
More informationCEMENT STABILIZED SAND
Section 02321 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Cement stabilized sand material. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices. 1. No separate payment will be made for Work performed under this
More informationITEM 522 PORTLAND CEMENT CONCRETE PLANTS
ITEM 522 PORTLAND CEMENT CONCRETE PLANTS 522.1. Description. This Item shall govern for the plant facilities, equipment and operation of portland cement concrete plants. 522.2. Class of Plants. The class
More informationStepping Stone. Name: Date:
Stepping Stone Name: Date: Description: The project is useful for landscaping. Measurements of the right amount of Portland cement, water, sand, and course aggregates will be used to construct this project.
More informationSECTION STONE FLOORING
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 09 63 40 STONE FLOORING SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph not applicable in the section and
More informationCOPING and STOOLS - EXTERIOR CUBIC STONE COPING AND WALLS DATA SHEET 1.0 INTRODUCTION 2.0 DESIGN CRITERIA EXTERIOR CUBIC STONE COPING AND WALLS
COPING and STOOLS - EXTERIOR CUBIC STONE COPING AND WALLS 1.0 INTRODUCTION 1.1 Installation Method. There are several methods by which cubic coping and walls can be installed. Consideration should be given
More information1 Exam Prep Prov Module: Repair and Restoration Questions and Answers
1 Exam Prep Prov Module: 28303-05 Repair and Restoration Questions and Answers 1. Poor workmanship can cause early deterioration in masonry structures. A. True B. False 2. Most of the deterioration in
More informationSECTION CONCRETE TILE ROOFING. A. American Society for Testing and Materials (ASTM):
SECTION 07324 CONCRETE TILE ROOFING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 07600 - Flashing and Sheet Metal. 1.02 REFERENCES A. American Society for Testing and Materials
More informationLaHabra Cementitious Stucco Finishes
LaHabra Cementitious Stucco Finishes Attractive, Long-Lasting and Affordable. Since 1926 L A H A B R A THE ORIGINAL CALIFORNIA STUCCO S T U C C O LaHabra Cementitious Stucco Finishes The First Name in
More informationDIVISION 3 CONCRETE Section Concrete Rehabilitation
Spec Component: SC-119-0907 SikaRepair 222 DIVISION 3 CONCRETE Section 03730 - Concrete Rehabilitation Part 1 General 1.01 Summary A. This specification describes the patching or overlay of interior and/or
More informationMortars for Brickwork - Selection and Quality Assurance
TECHICAL OTE on Brick Construction 1850 Centennial Park Drive, Reston, Virginia 20191 www.gobrick.com 703-620-0010 Mortars for Brickwork - election and Quality Assurance 8B October 2006 Abstract: This
More informationKel-Crete Premium Liquid Admixture Questions & Answers
Kel-Crete Premium Liquid Admixture Questions & Answers Q: What is Kel-Crete Premium Liquid Admixture? A: Kel-Crete Premium Liquid Admixture is the only proprietarily blended admixture that provides four
More informationC270 Masonry Mortar Samples 45 & 46 Please Note:
C270 Masonry Mortar Samples 45 & 46 Please Note: $ Read all instructions and ASTM Standards before testing. $ Please allow until September 8 th for receipt of these samples. You should receive a total
More informationSECTION MANUFACTURED MASONRY VENEER
TM Dutch Quality Stone 18012 Dover Road Mt. Eaton, OH 44659 Tel: (330) 359-7866 Fax: (330) 359-5990 e-mail: info@dutchqualitystone.com website: www.dutchqualitystone.com SECTION 04 73 00 MANUFACTURED MASONRY
More informationDesign Guide for the use of Hydraulic Lime Mortar. EcoRight Ltd Unit 2 Paddock Road Caversham Reading Berkshire RG4 5BY Tel:
Design Guide for the use of Hydraulic Lime Mortar EcoRight Ltd Unit 2 Paddock Road Caversham Reading Berkshire RG4 5BY Tel: 0845 873 3888 January 2018 EcoRight Ltd, part of the Owlsworth Group of Companies,
More informationSECTION CONCRETE TILE ROOFING Carpentry Flashing and Sheet Metal. A. American Society for Testing and Materials (ASTM):
SECTION 07324 CONCRETE TILE ROOFING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 07600 - Flashing and Sheet Metal. 1.02 REFERENCES A. American Society for Testing and Materials
More informationA Concrete Masonry Unit Wall
Technical Paper What successful Cost Estimators know.... and you should, too. >>>>>>> AN ESTIMATOR S GUIDE TO POLICIES, >>>>>>>>>>> PROCEDURES, AND STRATEGIES ESTIMATE THE COST OF A Concrete Masonry Unit
More informationAgrément Certificate 2003/297
Agrément Certificate 2003/297 Copyright Agrément South Africa, April 2003 The master copy of this document appears on the website: http://www.agrement.co.za Validity Users of any Agrément certificate should
More informationConcrete Block Catalog
Concrete Block Catalog Providing quality concrete masonry products and customer service since 1947! 20 Lafontain Street, Fort Wayne, Indiana 46802 Phone: 2.42.568 Fax: 2.46.2788 www.masolite.com Phone
More informationReinforced California Architectural Roof Pavers, Pedestal Supported
The following specification refers to the Stepstone, Inc. product known as: Reinforced California Architectural Roof Pavers, Pedestal Supported Stepstone, Inc. also manufactures California Architectural
More informationSECTION CONCRETE TILE ROOFING Carpentry Flashing and Sheet Metal. A. American Society for Testing and Materials (ASTM):
SECTION 07324 CONCRETE TILE ROOFING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 07600 - Flashing and Sheet Metal. 1.02 REFERENCES A. American Society for Testing and Materials
More informationFastWall WaterMaster Krak-Shield FastWall WaterMaster FastWall Krak-Shield FastWall. FastWall Stucco and High Efficiency Assemblies
FastWall WaterMaster Krak-Shield FastWall WaterMaster FastWall Krak-Shield FastWall FastWall Stucco and High Efficiency Assemblies LaHabra - The Single Source Stucco The LaHabra Advantage Since 1926, LaHabra
More informationDIVISION 3 - CONCRETE Section Concrete Toppings Section Concrete Resurfacing Section Concrete Rehabilitation
Spec Component: SC-025-03/10 SikaTop 122 Plus DIVISION 3 - CONCRETE Section 03550 - Concrete Toppings Section 03720 - Concrete Resurfacing Section 03730 - Concrete Rehabilitation Part 1 General 1.01 Summary
More informationThin Architectural Splitface Block Veneer Specification Guide
Thin Architectural Splitface Veneer System with AccuTab Technology R Thin Architectural Splitface Block Veneer Specification Guide Section 04711: Manufactured Concrete Veneer Use this specification guide
More informationDIVISION 7 STRUCTURES
DIVISION 7 STRUCTURES Section 701. PORTLAND CEMENT CONCRETE FOR STRUCTURES 701.01 Description. Proportion structural concrete according to this section for the various grades of concrete required on the
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2422 - STO QUIK GOLD SOFFIT SYSTEM PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUnit Masonry
04 00 00 Unit Masonry This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or in notes
More informationINSTRUCTIONS FOR PREPARING YOUR QUALITY PLAN SUBMITTAL
INSTRUCTIONS FOR PREPARING YOUR QUALITY PLAN SUBMITTAL SAVE A COPY OF YOUR TEMPLATE Save a copy of your template under a different name. Keep one master copy for future use and save project specific copies
More information