ITCC provides products to comply entirely with international standards specifications; applicable standards are ASTM, BSI, & SSD.
|
|
- Magdalen Hoover
- 5 years ago
- Views:
Transcription
1 FENCE
2
3 FENCES Chain Link Fencing remains the favorite for residential and industrial needs, as it is still up to today one of the easiest and most cost effective ways to provide security and access control with see through boundary definition, that require minimal maintenance after being installed. ITCC provides products to comply entirely with international standards specifications; applicable standards are ASTM, BSI, & SSD. ITCC also provides complete Typical Fence Systems of chain link security fencing that combine strength with most cost effective mean according to customers special requirements and needs. Fencing mainly consists of four elements in which all are available in Hot Dipped Galvanized &/or PVC coat/uv paint coat : Structure Fabric Fittings Gates * The Structure is a tubular and corner steel framework and consists of four components : Corner/End Straining Posts, Intermediate Line Posts, Brace/Top Rail Posts, and Gate Posts. * The Fabric consists of four components : Chain Link, Barbed Wire, Concertina Razor, and Tension Wire. * The Fittings are the accessories hardware used for the assembly of the fabric on the framework and are available in both heavy & light systems. * The Gates are provided in single/double/sliding bolted/welded construction systems. ITCC offers drawing design supports according to customer s special requirements.
4 Revolutionary Quality ITCC manufactures the Zinc-Tech the most specified requested framework in the fencing industry. Zinc-Tech is manufactured with cold-formed steel which provides high yield and tensile strenght, followed by a uniform Tripple Layer of Corrosion protection. Zinc-Tech has a superior strength in gauge & weight and is as much as 33% Stronger than Schedule40 Clear Organic Coating &/or UV Paint Coat Conversion Coating HDG Zinc Flo-coat Conforms To Astm B6 Black Steel Pipe Conforms To Astm 53 Cold-formed Steel Providing High Yield & Tensile Strenght TECHNICAL SPECIFICATIONS: Steel: Zinc: Black steel strip used in the manufacturing of pipe conforms to ASTM A53 and is cold rolled forming with minimum yield stength of 50,000 PSI. Continous Hot-Dipped Galvanized coating on OD is high grade and special high grade Zinc conforms to ASTM B6. Zinc-rich ID coating protects against condensation build-up that causes the pipe to rust. Conversion Coating: The conversion coating is applied over the surface of the Zinc to enhance corrosion reisistance. Organic Clear Coating: The organic clear coating is applied over the conversion coating, is manufatured from high grade raw materials that maintains a shiny appearance in all climates and under the most severe atmospheric conditions.
5 FABRIC Chain Link ITCC manufactures chain link as follows : Wire size: 1.8mm up to 4.5mm Pitch size: 50 x 50, 60 x 60, 70 x 70, 80 x 80 mm Height: 0.50M up to 4M PVC standard coat colour: Green Concertina Razor ITCC manufactures the concertina razor type R3 as follows : Coil Diameter: Blade Spacing: Blade Width: Blade Length: Blade Thickness: Wire Size: 450mm, 700mm, 960mm, 1250mm 36mm 15mm 23mm 0.5mm 2.5mm Barbed Wire ITCC manufactures the barbed wire as follows : Barbing-wire size : 1.8mm up to 2.5mm Barb-wire size : 1.8mm up to 2.5mm PVC standard coat colour: Green Wires Tension, Tie and Stirrup Wire Size: 1.8mm up to 4.50mm PVC standard coat colour: Green
6 PRODUCT SPECIFICATIONS Outside Diameter Pipe Framework ASTM A53 SCH40 Wall Thickness Weight Kg/M Outside Diameter (MM) BSI Wall Thickness (MM) Weight Kg/M Outside Diameter (MM) ZT40 Wall Thickness (MM) Weight Kg/M Chain Link 3 Selvedge Finishes Knuckled / Twisted Ends / Knuckled and Twisted Coil Lenght : 10M up to 25M Barbed Wire 2 Line Strands 4 Points barbed Barb Spacing 7.5cm up to 15cm Coil Length - 80M and above Concertina Razor Core Wire Diameter c/c Blade Space Blade Lenght Blade Width TYPE R3 Blade Spacing: Blade Width: Blade Length: Blade THickness: Coil OD: Coil Length: Wire: 36mm 15mm 23mm 0.5mm 450mm, 700mm, 960mm, 1250mm 7M up to 15M Ø 2.5mm
7 FITTINGS Loop Cap Winder Bracket Round End Band Sleeve Connector Brace End Cup Offset End Band Top Cap Carriage Bolt & Nut Two Way Band Truss Rod
8 FITTINGS Dropper Bar Stretcher Bar Turnbuckle Single Barb Arm on SP Y - Barb Arm on SP Eye Bolt & U - Nut Single Barb Arm on LP Y - Barb Arm on LP Hex. Bolt & Nut Hex. Bolt On Loop Cap
9 FENCE SYSTEMS Applicable Standards Fencing System ASTM BSI SSD ITCC Recommended System ITCC-APS (All Purpose System) ITCC-SS (Strut System) ITCC-SCS (Sports Court System) ITCC-FS (Farm System) ITCC-GATE (Gate Systems)
10 ALL PURPOSE SYSTEM ITCC-APS1
11 ALL PURPOSE SYSTEM ITCC-APS2 ITCC-APS3 ITCC-APS4 Y-Type Ext. Barb Arm Single Type Ext. Barb Arm Cranked Post Type
12
13 SPORTS COURT SYSTEMS ITCC-SCS
14 FARM SYSTEMS ITCC-FS
15 GATE SYSTEM ITCC-GATE1 WELDED GATES CONSTRUCTION DOUBLE SINGLE
16 GATE SYSTEM ITCC-GATE2 WELDED GATES CONSTRUCTION
17 FENCE ASSEMBLY 1 TOP CAP 2 ROUND END BAND 3 OFFSET END BAND 4 2-WAYS END BAND 5 BRACE END CAP 6 TOP/BRACE RAIL POST 7 CHAIN LINK 8 WINDER BRACKET 9 TENSION WIRE 10 TRUSS ROD 11 TURNBUCKLE 12 SLEEVE CONNECTOR 13 STRETCHER FLAT BAR 14 CARRIAGE BOLT & NUT 15 SP/LP POST 16 EXT. BARB ARM 17 BARBED WIRE 18 EYE BOLT & U-NUT SKETCH NO. DESCRIPTION
18 LOCATION PRODUCT MAP RANGE JEDDAH : P.O. Box 10374, Jeddah 21433, Saudi Arabia. Tel Fax: Extn fence@itcc-group.com. FACTORY:
SECTION CHAIN LINK FENCING
SECTION 02835 - CHAIN LINK FENCING 1.0 GENERAL 1.1 Furnish and install chain link fencing complete in place with gates and accessories as specified herein and as shown on the Contract Drawings. 1.2 Reference
More informationCITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS
CITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS PART 1 - GENERAL 1.01 SUMMARY A. Section Includes furnishing and installing chain-link fabric fence, gate, and appurtenances. 1.02
More informationSECTION CHAIN LINK FENCES AND GATES
SECTION 32 31 13 CHAIN LINK FENCES AND GATES SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use this section in specifying permanent chain
More informationITEM 555 CHAIN LINK FENCING
ITEM 555 AFTER MARCH 1, 2012 CHAIN LINK FENCING 555.1 Description. This item shall govern for furnishing the quantities of chain link fencing and gates as shown on the plans, including all posts, bracing
More informationSECTION CHAIN LINK FENCES AND GATES (PARK)
SECTION 02821 CHAIN LINK FENCES AND GATES (PARK) PART I GENERAL 1.1 SECTION INCLUDES A. Installation of chain link fences, and gate units provided by single source including erection accessories, fittings,
More informationANTI RAM SECURITY CHAIN LINK FENCE - 4, MPH SECTION
ANTI RAM SECURITY CHAIN LINK FENCE - 4,000 LB @ 20 MPH SECTION 32 31 13.53 2015
More informationCONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING DISTRIBUTION EQUIPMENT
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DISTRIBUTION EQUIPMENT SPECIFICATION EO-1124 REVISION 3 November 2013 EFFECTIVE DATE November 11,
More informationCHAIN LINK FENCES AND GATES
SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 SUMMARY A. Alternate Material for Fence Post and Framing Material: Where schedule 40 galvanized steel is specified, the following will be accepted:
More informationTITLE: CAMP JOHNSON OVERPASS / HWY 17 BYPASS SECURITY FENCE UPGRADES
CONTRACT # N40085-15B-0457 PROJECT # 15R036CN MACC # 15-0457 MAXIMO# 4608934 TITLE: CAMP JOHNSON OVERPASS / HWY 17 BYPASS SECURITY FENCE UPGRADES ATTACHMENTS: 1. 15-0457 CJ OVERPASS SECURITY UPGRADES Site
More informationMERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing
MERCHANTS METALS SECTION 32 31 13 COLORBOND CHAIN LINK FENCE AND GATES 2014 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements,
More informationSECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
More informationSECTION CHAIN LINK FENCES AND GATES (GALVANIZED) A. Fence framework, fabric, gates, and accessories.
SECTION 02830 CHAIN LINK FENCES AND GATES (GALVANIZED) 1.0 GENERAL 1.1 Section Includes A. Fence framework, fabric, gates, and accessories. B. Excavation for post bases; concrete footing for posts. C.
More informationA. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
More informationSECTION CHAIN LINK FENCES AND GATES
SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 REFERENCES AND CODES A. Florida Department of Education, Office of Educational Facilities - State Requirements for Educational Facilities -
More informationCONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 772 NOVEMBER 2017 (Formerly OPSS 772, November 2012) Note: The PROV published in November 2017 replaces OPSS 772 COMMON, November 2012 with no technical
More informationSECTION CHAIN LINK FENCES
SECTION 02 44 40 PART 1 - GENERAL 1.1 DESCRIPTION A. Work included: Provide chain link fence system where shown on the Drawings, as specified herein, and as needed for a complete and proper installation.
More informationSECTION CHAIN LINK FENCING
Section 02444 1 SECTION 02444 CHAIN LINK FENCING PART 1 - GENERAL 1.01 DESCRIPTION A. Requirement. Under these specifications, the Contractor shall furnish all materials, labor, tools, and equipment required
More informationCHAIN LINK FENCES AND GATES
SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 REFERENCES AND CODES A. Florida Department of Education, Office of Educational Facilities - State Requirements for Educational Facilities -
More informationMATERIAL SPECIFICATION FOR CHAIN-LINK FENCE COMPONENTS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1541 NOVEMBER 2005 (Reissued November 2010) MATERIAL SPECIFICATION FOR CHAIN-LINK FENCE COMPONENTS TABLE OF CONTENTS 1541.01 SCOPE 1541.02 REFERENCES
More informationA. ASTM A121 Specification for Metallic-Coated Carbon Steel Barbed Wire. B. ASTM A392 Specification for Zinc-Coated Steel Chain-Link Fence Fabric
SECTION 32 31 13 CHAIN LINK FENCE AND GATES 2015 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements, general and supplemental
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationSECTION FENCING. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 323100 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationTable OF Contants VISION MISSION OBJECTIVE. Introduction. Galvanised Chain Link Fence. Sport Feild Chain Link Fence. ASTM Standard Chain Link Fence
FENCE PRODUCTS Table OF Contants VISION MISSION OBJECTIVE Introduction Galvanised Chain Link Fence ASTM Standard Chain Link Fence PVC ASTM Coated Chain Link Fence Sport Feild Chain Link Fence Fence Accessories
More informationSECTION 1208 CHAIN LINK FENCING DESCRIPTION
SECTION 1208 CHAIN LINK FENCING 1208-1 DESCRIPTION This item covers the requirements for furnishing materials and constructing new chain link fences and gates in accordance with the details included herein
More informationCITY OF FRIENDSWOOD TECHNICAL SPECIFICATIONS DOCUMENT 00085B ADDENDUM ADDENDUM NO. 1
ADDENDUM Date of Addendum: December 30 th, 2015 PROJECT NAME: Fencing for Sportspark PROJECT NO: GO1507 BID DATE: Tuesday, January 5 th, 2016 FROM: City of Friendswood Department of Public Works 1306 Deepwood
More informationCONSTRUCTION SPECIFICATION FOR CHAIN LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 541 DECEMBER 1990 CONSTRUCTION SPECIFICATION FOR CHAIN LINK FENCE 541.01 SCOPE 541.02 REFERENCES 541.03 DEFINITIONS 541.05 MATERIALS TABLE OF CONTENTS
More informationCW 3550 Chain Link and Drift Control Fence TABLE OF CONTENTS
January 2014 SPECIFICATION CW 3550 R3 CW 3550 Chain Link and Drift Control Fence TABLE OF CONTENTS 1. GENERAL CONDITIONS... 1 3. DESCRIPTION... 1 5. MATERIALS... 1 5.1 Drift Control Fence... 1 5.1.1 Approved
More informationWALCOOM. Walcoom Corporation CHAIN LINK FENCE.
WALCOOM Walcoom Corporation CHAIN LINK FENCE "Whatever your fencing need is, Walcoom can help..." For over 20 years, Walcoom Corporation has been providing professional chain link fence solutions to properties
More informationSpecial Provision No. 541S01 October OPSS 541, Construction Specifications for Chain Link Fence, is deleted and replaced with the following:
CHAIN LINK FENCE - Item No. GATES - Item No. Special Provision No. 541S01 October 1998 AMENDMENT TO OPSS 541, DECEMBER 1990 OPSS 541, Construction Specifications for Chain Link Fence, is deleted and replaced
More informationRR-F-191/3D 14 May SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET
14 May 1990 ----------- SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST, METAL (CHAIN-LINK FENCE POSTS, TOP RAILS AND BRACES) (DETAIL SPECIFICATION) This Federal
More informationSECTION CHAIN LINK FENCES AND GATES
SECTION 32 31 13 SPEC WRITER NOTES: Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
More informationSpecifications Temp Fence. Wire: 84 Tall, 9ga wire, with a 2-3/8 diamond mesh size.
Specifications Temp Fence Wire: 84 Tall, 9ga wire, with a 2-3/8 diamond mesh size. Line Post: Line post will be at least 1-5/8 O.D. x 10.080. Concrete footing will be optionally used in softer conditions,
More informationANTI-PERSONNEL SECURITY FENCE RIGID WELDED MESH (RWM)
ANTI-PERSONNEL SECURITY FENCE RIGID WELDED MESH (RWM) Al Kuhaimi Metal Industries ltd. (KMI) is pleased to announce the newly product launched the Rigid Welded Mesh (RWM) system on rolls and panels. Both
More informationHouston Community College 3200 Main Parking Garage November 15, 2010 Houston Community College
SECTION 323113 - CHAIN LINK FENCES AND GATES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION 2831 ITEM F-162 CHAIN-LINK FENCES
SECTION 2831 ITEM F-162 CHAIN-LINK FENCES PART 1 - GENERAL 1.1 DESCRIPTION. This item shall consist of furnishing and erecting a chain-link fence in accordance with these specifications and the details
More informationInternational Tube & Conduit Company Ltd. GALVANIZING EDGE IN TUBE TECHNOLOGY
GALVANIZING EDGE IN TUBE TECHNOLOGY ABOUT THE COMPANY ITCC is a major manufacturer of Steel Conduits, Steel Tubes, Scaffolding and Construction Props, as well as fence materials. It operates a state-of-the-art
More informationColorado River Aqueduct Pumping Plants 230 kv Disconnect Switches Replacement
DATE: July 15, 2011 ADDENDUM NUMBER: 2 MODIFYING: Specifications No. 1698 PROJECT: Colorado River Aqueduct Pumping Plants 230 kv Disconnect Switches Replacement BID TIME AND DATE: 2:00 p.m., July 19, 2011
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 02821 - CHAIN-LINK FENCES AND GATES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION ORNAMENTAL WELDED STEEL FENCING
SECTION 032300 ORNAMENTAL WELDED STEEL FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationCONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 541 NOVEMBER 2005 CONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE TABLE OF CONTENTS 541.01 SCOPE 541.02 REFERENCES 541.03 DEFINITIONS 541.04 SUBMISSION
More informationA NEW PRE-K BUILDING FOR BIG SPRING LAKE KINDERGARTEN SCHOOL FOR THE ALBERTVILLE CITY BOARD OF EDUCATION ALBERTVILLE, ALABAMA
McKee and Associates Architecture and Interior Design Addendum No. FOUR Date: 09.24.18 Project: A NEW PRE-K BUILDING FOR BIG SPRING LAKE KINDERGARTEN SCHOOL FOR THE ALBERTVILLE CITY BOARD OF EDUCATION
More informationSECTION DECORATIVE METAL RAILINGS
SECTION 05 73 00 DECORATIVE METAL RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Vertical Stainless Steel Cable Railing System. B. Horizontal Stainless Steel Cable Railing System. 1.2 RELATED SECTIONS
More informationSECTION CHAIN LINK FENCES AND GATES
SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. This Section includes materials applicable for commercial/industrial and security vinyl coated chain link fence and framework.
More informationMO: Tl RSA: 1406B
MO: Tl425-02 SECTION 323113- CHAIN LINK FENCES AND GATES PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION CHAIN LINK FENCING
PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. Requirements vary. A/E shall consult with DPS project manager to determine extent and type of permanent site fencing to be employed. B. Provide
More informationK. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.
DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:
More information1. Fence and gate posts, rails, and fittings. 2. Chain-link fabric, reinforcements, and attachments.
SECTION 323113 - CHAIN LINK FENCES AND GATES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationCONSTRUCTION SPECIFICATION FOR EXPANDED METAL ANTI-GLARE SCREEN
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 791 NOVEMBER 2014 CONSTRUCTION SPECIFICATION FOR EXPANDED METAL ANTI-GLARE SCREEN TABLE OF CONTENTS 791.01 SCOPE 791.02 REFERENCES 791.03 DEFINITIONS
More informationCONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 772 NOVEMBER 2010 CONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE TABLE OF CONTENTS 772.01 SCOPE 772.02 REFERENCES 772.03 DEFINITIONS 772.04 DESIGN
More informationSECTION 2 DIVISION 05 METALS
SECTION 2 DIVISION 05 METALS DIVISION 5 - METALS Note: This is a guide for Designers only. Contents shall not be used in lieu of specifications as part of the Designer s Contract Documents. GENERAL DESIGN:
More informationAmendment to OPSS 772 (Nov 2012) Construction Specification for Chain-Link Fence
Engineering and Construction Services Division Standard Specifications for Road Works TS 772 April 2014 Amendment to OPSS 772 (Nov 2012) Construction Specification for Chain-Link Fence OPSS 772.05 OPSS
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationSECTION METAL STAIRS
SECTION 05 51 00 METAL STAIRS PART 1 GENERAL 1.1 SUMMARY A. Section includes steel stair frame of structural sections, with closed risers; pan to receive concrete fill stair treads and landings; integral
More informationFence SpecCheck. A53/A53M-12 Schedule 40 & Schedule 80 Pipe: Specification for Pipe, Steel, Black
Fence SpecCheck ASTM Specifications (December 2017) www.astm.org A53/A53M-12 Schedule 40 & Schedule 80 Pipe: Specification for Pipe, Steel, Black and Hot-Dipped, Zinc Coated, Welded and Seamless Schedule
More informationREQUEST FOR BIDS Public Works Contract SPECIFICATIONS FOR FENCE REPAIRS AND REPLACEMENT
REQUEST FOR BIDS Public Works Contract SPECIFICATIONS FOR FENCE REPAIRS AND REPLACEMENT DATE OF RELEASE: DATE OF CLOSING: RFB ID: July 18, 2013 at 8:00 am (cst) August 5, 2013 at 4:30 pm (cst) 0718201301
More informationSECTION METAL STAIRS
SECTION 05510 METAL STAIRS PART 1 GENERAL 1.01 SECTION INCLUDES A. Stairs with concrete treads. B. Stairs with metal treads. C. Structural steel stair framing and supports. D. Handrails and guards. 1.02
More informationInvitation to Bid MHM
Invitation to Bid FENCE @ MHM Responses to an Invitation to Bid will be received by the Purchasing Coordinator, Sumner County Board of Education, 1500 Airport Road, Gallatin, TN 37066 for FENCE @ Merrol
More informationSECTION ORNAMENTAL ALUMINUM FENCING
SECTION 032300 ORNAMENTAL ALUMINUM FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION 410 FENCES All materials shall be new and without flaws or defects of any type GENERAL
SECTION 410 FENCES 410.1 GENERAL This work shall consist of the construction of fences and gates in substantial compliance with the specifications, lines, and grades shown on the plans or established by
More informationTABLE OF CONTENTS. Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3. Pipe, Pipe Tube, Tube. Sheets & Plates
DRI1529-McNeilus-Revised 12/12/05 12:18 PM Page 1 McNeilus Steel, Inc. TABLE OF CONTENTS Page Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3 Cold Roll (Flats, Hex, Rounds) 17 Pipe, Pipe Tube,
More informationAddendum #4 NEW LOW HEAD OXYGEN SYSTEM Contractor EXHIBIT T SPECIAL PROVISIONS SECTION METAL SHADE STRUCTURE
SECTION 13 34 00 METAL SHADE STRUCTURE PART 1 - GENERAL 1.01 STRUCTURE TYPE A. Structure shall be free standing rigid frame and gable roof with slopes as indicated. Structure shall also include foundation,
More information.1 American Institute of Steel Construction (AISC) Specifications for Steel Buildings AISC
05 12 00 STRUCTURAL STEEL FRAMING Page 1 of 3 1 General 1.1 SECTION INCLUDES.1 Structural steel framing and support members 1.2 RELATED SECTIONS.1 Section 05 50 00 Metal Fabrications 1.3 REFERENCES.1 American
More information1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.
PAGE 051200-1 SECTION 051200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationUFGS (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-32 31 13 (November 2016) Change 1-05/17 ----------------------------- Preparing Activity: NASA Superseding UFGS-32 31 13 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationITEM 442 METALS FOR STRUCTURES
AFTER NOVEMBER 1, 2008 ITEM 442 METALS FOR STRUCTURES 442.1 Description. These specifications shall govern for materials such as structural steel, wrought iron, bronze, and other metals used in structures,
More informationPreassembled steel stairs with concrete-filled treads.
SECTION 055113 - PART 1 - GENERAL 1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
More informationSECTION METAL STAIRS
Tender SECTION 05510 METAL STAIRS PART 1 GENERAL 1.01 SECTION INCLUDES A. This section includes internal and external shop fabricated pre assembled steel stairs with integral handrails and ballustrades
More informationMETAL FABRICATION..1 General Conditions and Division 1 shall govern Work of this section.
CITY OF BRAMPTON LANDSCAPE SPECIFICATIONS SECTION 05500-1 PART 1 GENERAL 1.1 Description of Work.1 General Conditions and Division 1 shall govern Work of this section. 1.2 Quality Assurance.1 Personnel:.1
More informationMECHANICAL TUBE DIVISION
MECHANICAL TUBE DIVISION GALVANIZING Why Galvanize? PROTECTS THE STEEL Galvanizing (zinc coating) has been used to protect iron and steel from rusting for over one hundred years. Galvanizing protects steel
More informationQATAR STEEL TUBE & PIPE CATALOGUE INDUSTRIES FACTORY (W.L.L) qatarsteelfactory.com
TUBE & PIPE CATALOGUE qatarsteelfactory.com INTRODUCTION Since 1980 Qatar Steel Industries Factory has become the leading steel manufacturer in its region and a great factor in Qatar s economic growth,
More informationAS AS Australian Standard. Chain-link fabric security fences and gates. This is a free 7 page sample. Access the full version online.
AS 1725 2003 AS 1725 Australian Standard Chain-link fabric security fences and gates This Australian Standard was prepared by Committee CE-008, Chainwire Security Fencing. It was approved on behalf of
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationAMERICAN SAMOA POWER AUTHORITY Materials Management Office INVITATION FOR BIDS ( IFB ) EAST SIDE WELLS-BOOSTERS SECURITY FENCE REPLACEMENT
AMERICAN SAMOA POWER AUTHORITY Materials Management Office INVITATION FOR BIDS ( IFB ) EAST SIDE WELLS-BOOSTERS SECURITY FENCE REPLACEMENT Issuance Date: March 24, 2016 Closing Date: March 31, 2016 APPROVED
More informationA. Coordinate chain link fence & gate work with work before and after. See especially: 1. Bollards on worksite that are more than 10 ft from fence.
02830 CHAIN LINK FENCES AND GATES ************************************************************************************************************ Specifier: This section replaces 02831 (2004). It reflects
More informationKeuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes.
SECTION 05 73 16 {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes. PART 1 GENERAL 1.1 SUMMARY A. Section includes cable railing system, with architectural metal
More informationTel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates
Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic
More informationXI'AN LINKUN STEEL PIPE CO., LTD
Designation: A 50 0 (Reapproved 2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing This standard is issued under the fixed designation A 50; the number immediately
More informationFlat bar & square bar Hot rolled, weldable structural steel sections
Data sheet: E4.1 Flat bar & square bar Hot rolled, weldable structural steel sections General description ArcelorMittal Steel South Africa, Newcastle Steel produces an extensive range of structural steel
More informationFEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST, METAL (CHAIN-LINK FENCE POSTS, TOP RAILS AND BRACES) (DETAIL SPECIFICATION)
RR- F-191/3D 14 Mav 1990 SUPERSEDNG RR- F-191/3C July 22, 1981 FEDERAL SPECFCATON SHEET FENCNG, WRE AND POST, METAL (CHAN-LNK FENCE POSTS, TOP RALS AND BRACES) (DETAL SPECFCATON) This Federal specification
More informationSECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
More informationSECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION
PAGE 055015-1 SECTION 055015 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationInterior Hangers. Application
Application Interior bridge deck hangers are typically fabricated using two heavy duty sheet metal end clips that have been electrically resistance welded to an appropriate sized wire or formed metal connecting
More informationSECTION (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 48 (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.01 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for
More informationTable of contents Our products We are offering three product groups: Quality and Service Our product groups Basic products-panels EURO, Light Version, Compensatory, Round Top Gates and Pedestrian Gates
More informationTRANSPORT LINK CHAIN LINK CANTILEVER GATES
TRANSPORT II TRANSPORT ESTATE TRANSPORT IS ADAPTRACK CHAIN LINK CANTILEVER GATES 2"sq x.25" UPRIGHTS & DIAGONAL BRACES GATE TRACKS PRE-DRILLED FOR LEFT OR RIGHT OPENINGS ***GATE FABRIC MESH & BARBED WIRE
More informationCONSTRUCTION SPECIFICATION FOR SITE RESTORATION FOR UNDERGROUND UTILITIES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 507 JULY 1991 CONSTRUCTION SPECIFICATION FOR SITE RESTORATION FOR UNDERGROUND UTILITIES 507.01 SCOPE 507.02 REFERENCES 507.03 Not Used 507.04 Not Used
More informationProfile Sheets Insulated Sandwich Panels Z & C Purlins Decking Sheets PEB Accessories Fixing Accessories Insulation Materials
EMBUILD MATERIALS is a building materials company that provides relevant and high quality products to customers. We work hard to develop and deliver the best solutions for Building material industry in
More information1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces.
SECTION 05500- METAL FABRICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationHEBEI KESHI METAL WIRE MESH CO., LTD. HORSE FENCE PANEL EASILY ASSEMBLED AND DISASSEMBLED PORTABLE AND PERMANENT FENCING
HEBEI KESHI METAL WIRE MESH CO., LTD. HORSE FENCE PANEL EASILY ASSEMBLED AND DISASSEMBLED PORTABLE AND PERMANENT FENCING SAFETY OF ANIMALS AND PEOPLE UTILITY AND VERSATILITY KESHI Horse Fence Panel About
More informationFences. Part 1: Specification for chain link fences BS :2006 BRITISH STANDARD
BRITISH STANDARD Fences Part 1: Specification for chain link fences ICS 91.090 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Publishing and copyright information The BSI copyright
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-32 31 26 (April 2008) -------------------------- Preparing Activity: USACE Superseding UFGS 32 31 26 (January 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationBear Exhibit Fence Upgrades. The following modifications are hereby made part of the contract documents:
ADDENDUM TO BID T2017-04 Metropolitan Park District Department of Planning, Design and Development 4702 South 19 th Street Tacoma WA 98405 Date Prepared: November 17, 2017 Bid Number: T2017-04 Addendum
More informationStudent Services & Classroom Addition
SECTION 055113 - METAL PAN STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION HIGH-SECURITY CHAIN LINK FENCES AND GATES
SECTION 323113.53 - PART 1 - GENERAL 1.1 SUMMARY A. Section includes high-security chain-link fences and motor-operated, horizontal slide gates. 1.2 PERFORMANCE REQUIREMENTS A. Delegated Design: Design
More informationKANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 7 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 828 and replace with the following: SECTION 828 FENCING 828.1 DESCRIPTION
More informationCI/SfB (90.3) Jh2 January 2010 C L D. CLD Fencing Systems Specifier Guide
CI/SfB (90.3) Jh2 January 2010 C L D CLD Fencing Systems Specifier Guide 2 Introduction Introduction 3 Aesthetic boundary protection Full sports pitch systems CLD specialise in: rigid mesh fencing systems
More informationDIVISION 5 METALS SECTION COLD-FORMED METAL FRAMING
DIVISION 5 METALS SECTION 05 40 00 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information