FORMAK 629 CONCEALED WATERPROOFING SYSTEM

Transcription

1 FORMAK 629 CONCEALED WATERPROOFING SYSTEM

2

3 DIAGRAM OVERVIEW min. 100 min PROTECTION SCREED WITH G.I MESH BY OTHERS 50MM THK X 3M X 3M G30 CONCRETE PANEL REINFORCED WITH A LAYER OF BRC 3315 MESH AND JOINT FILLED SEALANT A LAYER OF GEOTEXTILE SEPARATION FLEECE 50MM THK EXTRUDED POLYSTYRENE INSULATION BOARD FORMAK 629 WATERPROOFING MEMBRANE FALL (1:100) ROOF SLAB SHALL CAST TO FALL AND SMOOTH c/s FILLET BY OTHERS MEMBRANE TERMINATED WITH SEALANT PROTECTION SCREED WITH G.I MESH 25 50MM THK X 3M X 3M G30 CONCRETE PANEL REINFORCED WITH A LAYER OF BRC 3315 MESH AND JOINT FILLED SEALANT A LAYER OF GEOTEXTILE SEPARATION FLEECE 50MM THK EXTRUDED POLYSTYRENE INSULATION BOARD 300 FORMAK 629 WATERPROOFING MEMBRANE 100 ROOF SLAB SHALL CAST TO FALL AND SMOOTH c/s FILLET BY OTHERS WARRANTY INFORMATION Only Hitchins trained applicators are approved to undertake all application work. Hitchins products carry a long-term warranty for both materials and workmanship. The warranty is further backed by Hitchins International Fidelity Fund. Please check with our local applicators if

4 ASIA S LEADING BUILDING PROTECTION SPECIALIST FORMAK 629 CONCEALED WATERPROOFING SYSTEM DATA SPECIFICATION SHEET Environmentally Friendly Coating DESCRIPTION membrane based on highly elastic organic polymers. Formak 629 contains no bitumen or coal tar and will not cause staining to marble, ceramic tiles or tile strength in areas where high stress may be encountered such as around pipes and up stands. Formak 629 is seamless and therefore eliminates potential failure due to poor joints. DATA SPECIFICATION areas that require alot of detailing work. PRODUCT SPECIFICATION COLOUR: Grey PACKING SIZE: 20 litre pail SHELF LIFE: 2 years in an unopened container SOLIDS (by volume): 59% THINNING: As Formak 629 is based on polyisoprene it can not be thinned with water. SPREADING RATE: Refer overleaf under application. DRYING TIMES: DRY FILM THICKNESS: 0.8mm to 1.0 mm. ELONGATION (ASTM D412): % TENSILE STRENGTH (ASTM D412): 4.08 N/mm 2 CRACK BRIDGING (ASTM C836): No 2mm WATER VAPOUR TRANSMISSION (ASTM E96): g/m 2 /24h WATER PENETRATION (DIN 1048: Part 5): No 5 bars ADHESION TO SUBSTRATE (ASTM D4541): 1.58 N/mm 2 SHORE A HARDNESS (ASTM D2240): 64.4 EXTENSIBILITY AFTER HEAT AGING (ASTM C1522): No cracks, tears or holes at 7.0mm

5 SUBSTRATE PREPARATION Make sure the substrate is clean, dry and free of dirt, loose particles etc. SUBSTRATE APPLICATION PRIMING Stir Formak 629 primer well before use. Concrete: Apply one coat of Formak 629 Primer at 8-10 m 2 /litre and allow to dry for 2 hours before overcoating. TREATMENT TO DETAILING Apply Formak 629 at 1.0 litre/m 2 making certain to dress up at least 300mm from the Formak 629 at 0.5 litre/m 2. ROOF APPLICATION Apply Formak 629 by roller or brush at 0.6 litre/m 2 and leave to dry for at least 4 hours before application of the 2nd coat at 0.6 litre/m 2. HEALTH & SAFETY Formak 629 contains ammonia, when used indoors, provision should be made to ensure that adequate ventilation is provided. In cases where ventilation is not adequate, operators should wear safety masks suitable for use with ammonia. Dry paint can be removed from the skin by using warm water and soap. Hitchins (FE) Marketing Pte Ltd Telephone: (65) Facsimile: (65) hitchins@hitchins.com Place Product Sample Here Revision B All data given and statements and recommendations made herein are base upon our research and experience and are all other issues.

6 MAJOR PROJECTS Audi Centre - Singapore Changi City - Singapore The Star Vista - Singapore De La Salle University Library - Philippines Grameen Phone Head Office - Bangladesh Empresss City Mall, Nagpur, India Preanger Hotel - Indonesia G-Residences Condominium - Kuala Lumpur Supreme Business Park, India APPLICATION & INSTALLATION 1. Application of Primer coat 2. Treatment to Details - 1st Coat of Unroll 100mm width fibreglass mat 4. Apply 1 coat of Formak 629 over fibreglass 5. Application of 1st Formak Topcoat 6. Application of final Formak 629 Topcoat