SECTION JOINT SEALERS
|
|
- Ruth Pitts
- 5 years ago
- Views:
Transcription
1 SECTION JOINT SEALERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Sealants and joint backing. B. Precompressed foam sealers. C. The sealant contractor shall make a comprehensive assessment of all conditions on the project where specified sealants will be needed for a complete seal of the exterior shell and interior sealing and caulking conditions and provide a complete sealant packing in the bid RELATED REQUIREMENTS A. Section Glazing: Glazing sealants and accessories SUBMITTALS A. See Section Administrative Requirements, for submittal procedures. B. Product Data: Provide data indicating sealant chemical characteristics. C. Samples: Submit two samples, 1/4 x 2 inch in size illustrating sealant colors for selection QUALITY ASSURANCE A. Applicator Qualifications: Company specializing in performing the work of this section with minimum two years experience FIELD CONDITIONS A. Maintain temperature and humidity recommended by the sealant manufacturer during and after installation. PART 2 PRODUCTS 2.01 MANUFACTURERS A. Silicone Sealants: 1. GE Silicones. 2. BASF Construction Chemicals-Building Systems: 3. Tremco, Inc. B. Polyurethane Sealants: 1. BASF Construction Chemicals-Building Systems: 2. Tremco, Inc. C. Acrylic Sealants (ASTM C920): 1. Tremco Global Sealants: D. Butyl Sealants: 1. Bostik Inc: 2. Pecora Corporation: 3. Tremco, Inc: E. Preformed Compressible Foam Sealers: 1. EMSEAL Joint Systems, Ltd: 2. Sandell Manufacturing Company, Inc: 3. Dayton Superior Corporation: JOINT SEALERS
2 McClellan Blakemore Architects 2.02 SEALANTS A. Type P-1 -General Purpose Exterior Sealant: Polyurethane; ASTM C920, Grade NS, Class 25, Uses M, G, and A; multi- component. 1. Applications: Use for: a. Control, expansion, and soft joints in masonry. b. Joints between concrete and other materials. c. Joints between metal frames and other materials. d. Other exterior joints for which no other sealant is indicated. B. Type B-1 -Exterior Metal Lap Joint Sealant: Butyl or polyisobutylene, nondrying, nonskinning, noncuring. 1. Applications: Use for: a. Concealed sealant bead in sheet metal work. b. Concealed sealant bead in siding overlaps. c. Under thresholds. C. Type LX-1 -General Purpose Interior Sealant: Acrylic emulsion latex; ASTM C 834,, Grade NF single component, paintable. a. AC-20 manufactured by Pecora Corp. b. Sonolac manufactured by Sonneborn Building Products., ChemRex, Inc. c. Tremco Acrylic Latex 834 manufactured by Tremco, Inc. a. Interior wall and ceiling control joints. b. Perimeter of hollow metal door frames in gypsum drywall. c. Other interior joints for which no other type of sealant is indicated. D. Type SIL-1 -Bathtub/Tile Sealant: White silicone; ASTM C920, Uses I, M and A; single component, mildew resistant. 1. Product: One of the following: a. 786 manufactured by Dow Corning Corp. b. Sanitary 1700 manufactured by GE. c. Rhodorsil 6C manufactured by Rhone-Poulenc, Inc. 2. Applications: Use for: a. Joints between plumbing fixtures and floor and wall surfaces. E. Type AC-1 -Acoustical Sealant for Concealed Locations: Permanently tacky non-hardening butyl sealant. 1. Applications: Use for concealed locations only: a. Sealant bead between top stud runner and structure and between bottom stud track and floor. F. Type P-2 - Interior Floor Joint Sealant: Polyurethane, self-leveling; ASTM C920, Grade P, Class 25, Uses T, M and A; single component. G. Type PAV-1 -Concrete Paving Joint Sealant: Polyurethane, self-leveling; ASTM C920, Class 25, Uses T, I, M and A; multi- component. 1. Color: Color as selected. a. Vulkem 922 manufactured by Mameco International, Inc. b. Dynatrol II manufactured by Pecora Corp. c. Dymeric manufactured by Tremco Inc. a. Joints in sidewalks and vehicular paving JOINT SEALERS
3 H. Type B-2 -Butyl Sealant: ASTM C920, Grade NS, Class 12-1/2, Uses NT, M, A, G, O; single component, solvent release, non-skinning, non-sagging. 1. Product: One of the following: a. BC-185 manufactured by Pecora Corp. b. PTI 757 manufactured by Protective Treatments, Inc. c. Tremco Butyl Sealant manufactured by Tremco, Inc. 2. Applications: Use for: a. Under thresholds at doors in exterior walls. I. Type P-3 -Nonsag Polyurethane Sealant: ASTM C 920, Grade NS, Class 25, Uses NT, M, A, O; single component, chemical curing, non-staining, non bleeding, non-sagging type. a. Vulkem 921 manufactured by Mameco International, Inc. b. Dynatrol I manufactured by Pecora Corp. c. Dymonic manufactured by Tremco Inc. a. As specified in Section Sheet Metal Flashing and Trim. J. Type SIL-2 -Silicone Sealant: ASTM C920, Grade NS, Class 25, Uses NT, A, G, M, O; single component, neutral curing, non-sagging, non-staining, fungus resistant, non-bleeding. a. Dow Corning 790 manufactured by Dow Corning Corp. b. Silpruf SCS 2000 manufactured by GE. c. Rhodorsil 5C manufactured by Rhone-Poulenc, Inc. 3. Movement Capability: Plus and minus 25 percent. 4. Service Temperature Range: -65 to 180 degrees F. 5. Shore A Hardness Range: 15 to Applications: Use for: a. Interior and exterior perimeter joints of metal frames in exterior walls. K. Type SIL-4 -Silicone Sealant: ASTM C 920, Grade NS, Class 25, Uses NT, A, G, M, O; single component, solvent curing, non-sagging, non-staining, fungus resistant, non-bleeding. a. Dow Corning 999A manufactured by Dow Corning Corp. b. SCS 1000 manufactured by GE. c. Rhodorsil 3B manufactured by Rhone-Poulenc, Inc. 3. Movement Capability: Plus and minus 25 percent. 4. Service Temperature Range: -65 to 180 degrees F. 5. Shore A Hardness Range: 15 to Applications: Use for: a. Joints in aluminum storefront framing system. L. Type PC-1 -Multi Component Sealant:[<>];, chemical curing, non-sagging, non-staining, a. Dymeric 511 manufactured by Tremco Inc.. b. Sika 2-C manufactured by Sikaflex. a. Precast Concrete Wall Panel Joints. JOINT SEALERS
4 McClellan Blakemore Architects 2.03 ACCESSORIES A. Primer: Non-staining type, recommended by sealant manufacturer to suit application. B. Joint Backing: Round foam rod compatible with sealant; ASTM D 1667, closed cell PVC; oversized 30 to 50 percent larger than joint width. C. Bond Breaker: Pressure sensitive tape recommended by sealant manufacturer to suit application. PART 3 EXECUTION 3.01 EXAMINATION A. Verify that substrate surfaces and joint openings are ready to receive work. B. Verify that joint backing and release tapes are compatible with sealant PREPARATION A. Remove loose materials and foreign matter that could impair adhesion of sealant. B. Clean and prime joints in accordance with manufacturer's instructions. C. Perform preparation in accordance with manufacturer's instructions and ASTM C1193. D. Protect elements surrounding the work of this section from damage or disfigurement INSTALLATION A. Perform work in accordance with sealant manufacturer's requirements for preparation of surfaces and material installation instructions. B. Perform installation in accordance with ASTM C1193. C. Perform acoustical sealant application work in accordance with ASTM C919. D. Measure joint dimensions and size joint backers to achieve width-to-depth ratio, neck dimension, and surface bond area as recommended by manufacturer. E. Install bond breaker where joint backing is not used. F. Install sealant free of air pockets, foreign embedded matter, ridges, and sags. G. Apply sealant within recommended application temperature ranges. Consult manufacturer when sealant cannot be applied within these temperature ranges. H. Tool joints concave CLEANING A. Clean adjacent soiled surfaces PROTECTION A. Protect sealants until cured SCHEDULE - Provide sealant at locations listed in 2.02 and as listed herein. A. Exterior Joints for Which No Other Sealant Type is Indicated: Type P-1; colors as selected. B. Control and Expansion Joints in Paving: Type PAV-1. C. Exterior Wall Expansion Joints: Type SIL-2. D. Control, Expansion, and Soft Joints in Masonry, and Between Masonry and Adjacent Work: JOINT SEALERS
5 Type SIL-2. E. Butt Joints in Exterior Metal Work and Siding: Type P-3. F. Under Exterior Door Thresholds: Type B-2. G. Joints Between Plumbing Fixtures and Walls and Floors. H. In STC-Rated Walls, Between Metal Stud Track/Runner and Adjacent Construction: Type AC-1. I. Hollow metal frames, to Drywall: Type: LX-1. J. Precast Concrete Butt Joints: Type: PC-1 K. Joints in aluminum storefront framing system: Type: SIL-4. L. At countertops and walls, LX-1, Color As Selected by Architect. END OF SECTION JOINT SEALERS
THERMAL AND MOISTURE PROTECTION
DIVISION 7 THERMAL AND MOISTURE PROTECTION SECTION 07900 JOINT SEALERS PART 1 GENERAL 1.1 SECTION INCLUDES A. Preparing substrate surfaces. B. Sealant and joint backing. 1.2 SUBMITTALS A. Submit under
More information2. Gj-type substrates: Glass and transparent plastic glazing sheets. 3. A-type substrates: Metals, porcelain, glazed tile, and smooth plastics.
07900 JOINT SEALERS PART 1- GENERAL 1. SUMMARY a. Section Includes: 1. The sealing of joints indicated on schedule at the end of this section. 2. The sealing of exterior joints, including: a. Exterior
More informationA. This Section includes joint sealants for the following applications, including those specified by reference to this Section:
SECTION 07 92 00 JOINT SEALANTS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes joint sealants for the following applications, including those specified by reference to this Section: 1. Exterior
More informationCR# Issued Date: June 14, 2016 Waterville, OH
SECTION 07 92 00 - JOINT SEALANTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Joint sealants 1.2 SUBMITTALS 1. Product Data: For each joint-sealant product indicated. 2. Samples: For each type
More informationSECTION JOINT SEALANTS. A. Preparation of substrate surfaces to receive sealants.
SECTION 07910 JOINT SEALANTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Preparation of substrate surfaces to receive sealants. B. Furnish and install joint sealants and backing for the following locations:
More informationBlair Building Office Renovation - Sexual Offender Treatment Services (SORTS) M BA#16026 SECTION FIRESTOPPING
PART1 GENERAL Blair Building Office Renovation - Sexual Offender Treatment Services (SORTS) 1.01 SECTION INCLUDES A. Firestopping systems. SECTION 07 84 00 FIRESTOPPING B. Firestopping of all joints and
More informationSECTION JOINT SEALANTS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Nonsag gunnable joint sealants. B. Self-leveling pourable joint sealants. C. Joint backings and accessories. 1.02 RELATED REQUIREMENTS SECTION 07 9200 - JOINT SEALANTS
More informationSECTION JOINT SEALANTS
SECTION 07 92 00 JOINT SEALANTS PART 1 GENERAL 1.0 RELATED DOCUMENTS 1. Drawings and general provisions of Contract, including General and Supplementary Conditions and other Division-01 Specification Sections,
More informationA. Product Data: For each joint-sealant product indicated. D. Joint-Sealant Schedule: Include the following information:
SECTION 079200 - JOINT SEALANTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION THERMAL INSULATION
PART 1 GENERAL 1.01 SECTION INCLUDES A. Batt insulation where shown on drawings. SECTION 07 21 00 THERMAL INSULATION B. Sound Attenuation Batt Insulation in all interior stud framed walls. 1.02 SUBMITTALS
More informationSECTION JOINT SEALANTS
SECTION 07920 JOINT SEALANTS PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are applicable to this
More informationSECTION JOINT SEALERS 1.03 THIS SECTION INCLUDES JOINT SEALERS FOR THE FOLLOWING LOCATIONS:
PART 1 - GENERAL 1.01 RELATED DOCUMENTS: SECTION 07900 - A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 079200 - JOINT SEALANTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION (07920) - JOINT SEALANTS
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: SECTION 07 92 00 (07920) - JOINT SEALANTS 1. Clean and Prepare Joint Surfaces 2. Sealant and Backing Materials including primers, backer rods, bond breakers
More informationSECTION JOINT SEALANTS
SECTION 079200 JOINT SEALANTS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Silicone joint sealants. 2. Urethane joint sealants. 3. Latex joint sealants. 4. Acoustical joint sealants. B. Related
More informationSECTION JOINT SEALANTS PART 1 - GENERAL
SECTION 079200 - JOINT SEALANTS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Silicone joint sealants. 2. Latex joint sealants. 3. Preformed joint sealants. 4. Acoustical joint sealants. 1.2 ACTION
More informationPART 1 GENERAL JOINT SEALANTS
SECTION 07 92 00 (07920) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Clean and Prepare Joint Surfaces 2. Sealant and Backing Materials including primers, backer rods, bond breakers and accessories.
More informationNEBRASKA ARMY NATIONAL GUARD PENTERMAN INTERIOR REMODEL PROJECT
MILITARY DEPARTMENT STATE of NEBRASKA LINCOLN, NEBRASKA April 16, 2014 NEBRASKA ARMY NATIONAL GUARD PENTERMAN INTERIOR REMODEL PROJECT Penterman Readiness Center 2400 NW 24th Street Lincoln, NE at PROJECT
More informationPROJECT NO August 19, 2014 SENATE CHAMBER MEZZANINE RENOVATION MISSOURI STATE CAPITOL BUILDING SECTION JOINT SEALANTS
SECTION 079200 -JOINT SEALANTS PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationBid Opportunity Pacific Avenue, Winnipeg, Manitoba Page 1..1 CGSB 51-GP-23M-[78] Thermal Insulation, Urethane, Spray in Place.
Bid Opportunity 40-2008 07216 SPRAY IN PLACE URETHANE INSULATION 1199 Pacific Avenue, Winnipeg, Manitoba Page 1 1 General 1.1 REFERENCES.1 CGSB 51-GP-23M-[78] Thermal Insulation, Urethane, Spray in Place..2
More informationB. Preconstruction Field-Adhesion Testing: Before installing sealants, field test their adhesion to Project joint substrates as follows:
SECTION 079200 - JOINT SEALANTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationDrawings, General Conditions and Supplementary General Conditions and other Division-1 Specification Sections, apply to this Section.
Rowan-Cabarrus Community College Building 300 Multipurpose Space Renovation June 2017 SECTION 07200 - INSULATION PART 1 - GENERAL RELATED DOCUMENTS: Drawings, General Conditions and Supplementary General
More informationJoint Sealants 07900-1 SECTION 07900 JOINT SEALANTS PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Acrylic-Latex sealant. 2. Precast concrete joint sealant. 3. Silicone sealant. 4. Synthetic rubber
More informationADDENDUM G1 JLG Perkett Elementary School RE: Addendum G1 Issued: September 8, 2014
ADDENDUM G1 JLG 14061 - Perkett Elementary School RE: Addendum G1 Issued: September 8, 2014 ADDENDUM G-1 NOTICE TO CONTRACTORS This Addendum is prepared to supplement information presented in the Drawings
More informationSUNY GENESEO RED JACKET DINING HALL RENOVATION SECTION JOINT SEALANTS
SUNY GENESEO 079200-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationA. Testing Agency Qualifications: Qualified according to ASTM C I 021 to conduct the testing indicated.
SECTION 079200 - PART 1- GENERAL 1.1 SUMMARY A. Section Includes: 1. Urethane joint sealants. 1.2 PRECONSTRUCTION TESTING A. Preconstruction Field-Adhesion Testing: Before installing sealants, field test
More informationBid Opportunity No Section Winnipeg, Manitoba Page 1
Bid Opportunity No. 931-2012 Section 07 21 16 BLANKET INSULATION Winnipeg, Manitoba Page 1 Part 1 General 1.1 RELATED SECTIONS.1 Section 01 33 00 Submittal Procedures..2 Section 01 73 00 Execution..3 Section
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 07 9200 - JOINT SEALANTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPART 1- GENERAL MISSOURI ARMY NATIONAL GUARD MISCELLANEOUS INTERIOR AND EXTERIOR REPAIRS CARTHAGE, MO T
SECTION 079200- JOINT SEALANTS AND CAULKING PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationConstruction Standards PAGE
Construction Standards PAGE 079200-1 SECTION 079200 - PART 1 - GENERAL 1.1 MSU ISSUES 1. It the intent of MSU that all joint sealants used on its projects will comply with LEED NC 3 Credit Requirements
More informationA. Product Test Reports: Based on evaluation of comprehensive tests performed by a qualified testing agency, for each product.
SECTION 072100 - THERMAL INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationARCH 478 OFFICE BUILDING SECTION GLAZING
SECTION 08800 GLAZING PART 1 GENERAL 1.01 SECTION INCLUDES A. Glass and plastic glazing. B. Glazing compounds and accessories. 1.02 RELATED SECTIONS A. Section 06200 - Finish Carpentry: Glazed relites
More informationSECTION JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 07-9200 - JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSpec. Standard: 08/31/ Revision: 09/28/07
SECTION 07900 SEALANTS PART 1 - GENERAL 1.01 SCOPE: The required applications include, but are not necessarily limited to, the following: A. Flashing and Joints B. Partition and Ceiling Joints C. Equipment
More informationA. Section Includes: B. Proceed with installation only after unsatisfactory conditions have been corrected.
Copyright 2009 AJA MasterSpec Full Length 08/09 SECTION 076100 - SNOW GUARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationc. Do not include spray applied insulation products or vapor retarders. a. All paints, coatings, spray insulation, adhesives or adhesive primers.
SECTION 072100 - THERMAL INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Foam-plastic board insulation. 2. Glass-fiber blanket insulation. 3. Vapor retarders. 1.2 ACTION SUBMITTALS A. Product
More informationA. Product Test Reports: Based on evaluation of comprehensive tests performed by a qualified testing agency, for each product.
SECTION 072100 - THERMAL INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationROOF REPLACEMENT AND ALTERATIONS TO WOODSTOCK Barrett Architecture, PC WASTE WATER TREATMENT FACILITY - Woodstock, VT February 28, 2019 SECTION
SECTION 079200 PART 1 - GENERAL 1.1 GENERAL PROVISIONS A. Attention is directed to the CONTRACT AND GENERAL CONDITIONS and all Sections within DIVISION 01 - GENERAL REQUIREMENTS which are hereby made a
More informationSECTION PENETRATION FIRESTOPPING PART 1- GENERAL PART 2- PRODUCTS 1.1 RELATED DOCUMENTS
SECTION 07 8413- PENETRATION FIRESTOPPING PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationExcel Medical Waste - Equipment Installation Section SECTION JOINT SEALANTS
SECTION 07 92 00 JOINT SEALANTS PART 1 - GENERAL 1.1 DESCRIPTION: Section covers all sealant and caulking materials and their application, wherever required for complete installation of building materials
More informationSECTION SEALANTS AND CAULKING
SECTION 07920 SEALANTS AND CAULKING PART 1 - GENERAL 1.1 DESCRIPTION: Section covers all sealant and caulking materials and their application, wherever required for complete installation of building materials
More informationThe City of Winnipeg Section Bid Opportunity No Turtle Island Community Centre Renovation Page 1 of 6
The City of Winnipeg Section 07 84 00 FIRESTOPPING Turtle Island Community Centre Renovation Page 1 of 6 Part 1 General 1.1 SECTION INCLUDES.1 Fireproof firestopping and fire-safing materials and accessories.
More informationSECTION THERMAL INSULATION
SECTION 07 2100 THERMAL INSULATION PART 1 GENERAL 1.01 SECTION INCLUDES A. Batt insulation in exterior wall and ceiling construction. B. Batt insulation for filling perimeter window and door shim spaces
More information07210 BUILDING INSULATION
07210 BUILDING INSULATION PART 1 - GENERAL 1. SUMMARY a. Section Includes: 1. Glass fiber blanket/batt. 2. Mineral (rock or slag) fiber blanket/batt. b. Related Sections: 1. Foam plastic board sheathing:
More informationTHE SCHOOL DISTRICT OF PHILADELPHIA BOARD OF EDUCATION Office of Capital Programs 440 North Broad Street, 3 rd Floor Suite 371 Philadelphia, PA 19130
THE SCHOOL DISTRICT OF PHILADELPHIA BOARD OF EDUCATION Office of Capital Programs 440 North Broad Street, 3 rd Floor Suite 371 Philadelphia, PA 19130 TELEPHONE: (215) 400-4730 Addendum No. 01 Subject:
More informationA. This specification describes the sealing of vertical joints/cracks with a one-component, gungrade, elastomeric sealants. B.
DURALINK SUPER ADHESION SEALANT DIVISION 7 - THERMAL AND MOISTURE PROTECTION SECTION 07 92 00 JOINT SEALANTS SECTION 07 92 13 ELASTOMERIC AND NON-ELASTOMERIC SEALANT PART 1 - GENERAL 1.01 SUMMARY A. This
More informationDIVISION 7 - THERMAL AND MOISTURE PROTECTION Section Joint Sealers Elastomeric and non-elastomeric sealant
Spec Component: SC-070-03/10 Sikaflex- 15LM Part 1 - General DIVISION 7 - THERMAL AND MOISTURE PROTECTION Section 07900 Joint Sealers Elastomeric and non-elastomeric sealant 1.01 Summary A. This specification
More informationAlabama A&M University Laundry Building at Normal Hill Apartments Project No ADDENDUM NUMBER 4
Laundry Building at Normal Hill Apartments 00 91 13-1 ADDENDUM NUMBER 4 SECTION 00 91 13 ADDENDUM NUMBER 4 PARTICULARS 1.01 DATE: AUGUST 7, 2017 1.02 PROJECT: LAUNDRY BUILDING AT NORMAL HILL APARTMENTS
More informationDow Corning Corporation Joint Sealants Guide Specification (Full Length Version)
Dow Corning Corporation Joint Sealants Guide Specification (Full Length Version) To support the growing demand for innovative, high-performance and sustainable structures, Dow Corning is continuously strengthening
More informationPART 1 - GENERAL SECTION JOINT SEALANTS 1.1 SUMMARY
PART 1 - GENERAL 1.1 SUMMARY SECTION 07 92 00 JOINT SEALANTS A. Throughout the Work, seal and caulk joints where shown on the Drawings and elsewhere as required to provide a positive barrier against passage
More informationB. Mirror glass for toilet rooms is specified in Section "Toilet Accessories."
SECTION 08800 - GLASS AND GLAZING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification
More informationTILING Lutheran Church of the Holy Spirit
SECTION 093000 - TILING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Porcelain tile. 2. Tile backing panels. 3. Metal edge strips. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationDIVISION 7 - THERMAL AND MOISTURE PROTECTION Section Joint Sealers Elastomeric and non-elastomeric Sealant
EZ Spec Component: SC-071NSEZ-03/10 Sikaflex-2c NS Part 1 - General DIVISION 7 - THERMAL AND MOISTURE PROTECTION Section 07900 Joint Sealers Elastomeric and non-elastomeric Sealant 1.01 Summary A. This
More information.1 Provide submittals in accordance with Section Submittal Procedures.
Place D Orléans Transitway Section 07 13 52 1231 Place D Orléans Dr, Ottawa, ON. WATERPROOFING MEMBRANE City of Ottawa Project No. CR008042 Page 1 of 2 1 GENERAL 1.01 SUBMITTALS.1 Provide submittals in
More informationDIVISION 7 - THERMAL AND MOISTURE PROTECTION Section Joint Sealers Elastomeric and non-elastomeric Sealant
Spec Component: SC-071NSEZ-03/10 Sikaflex-2c NS EZ Part 1 - General DIVISION 7 - THERMAL AND MOISTURE PROTECTION Section 07900 Joint Sealers Elastomeric and non-elastomeric Sealant 1.01 Summary A. This
More informationSECTION JOINT SEALANTS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 92 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. 3. For coordination with drawings use term "sealants"
More informationSECTION GYPSUM BOARD
SECTION 092900 GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION GLAZING
SECTION 08800 GLAZING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
More informationSECTION GLAZING
SECTION 08 8000 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Glass. B. Glazing compounds and accessories. 1.02 REFERENCE STANDARDS A. 16 CFR 1201 - Safety Standard for Architectural Glazing Materials; current
More informationDist. by: BEST MATERIALS Ph:
Dist. by: BEST MATERIALS Ph: 800-474-7570 www.bestmaterials.com Email: Sales@BestMaterials.com NOVALINK SL SELF-LEVELING CONSTRUCTION SEALANT DIVISION 7 - THERMAL AND MOISTURE PROTECTION SECTION 07 92
More informationConstruction Sealants 101 Making the Connections. Building Enclosure Council Austin October 3, 2012
Construction Sealants 101 Making the Connections Building Enclosure Council Austin October 3, 2012 RPM Incorporated Consumer Consumer Industrial 2 Topics Covered Overview of various types of construction
More informationSECTION PIBERGLAS REINFORCED PLASTIC PANELING
SECTION 06 6400 - PIBERGLAS REINFORCED PLASTIC PANELING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationA. Manufacturer: A firm that produces primary glass or fabricated glass as defined in referenced glazing publications.
SECTION 08800 - GLAZING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationSECTION TILING PART 1 - GENERAL 1.1 SUMMARY. A. Section Includes: 1. Ceramic tile. 2. Waterproof membrane. 3. Metal edge strips.
SECTION 093000 - TILING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ceramic tile. 2. Waterproof membrane. 3. Metal edge strips. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCESA / NASA UFGS-07 92 00 (January 2007) -------------------------------- Preparing Activity: NAVFAC Superseding UFGS-07 92 00 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationSECTION SEALANTS AND CAULKING
07951-1 of 5 SECTION 07951 SEALANTS AND CAULKING 07951.01 GENERAL A. Description Sealants and caulking shall include, but not necessarily be limited to, furnishing and installing caulking, sealants, and
More informationPella 250 Series. Wood Frame Construction with Vinyl Siding... V250-ID-888 Wood Frame Construction with Brick Veneer...
SECTION DIRECTORY General Information Introduction... V250-ID-886 Installation Accessories and Applications... V250-ID-886 Typical Sealant Placement Details... V250-ID-887 Fin Installation Details Wood
More informationDATE: September 28, SUBJECT: Addendum No. 1 Union County Public Schools 2019 Walkway Canopy Projects
DATE: September 28, 2018 SUBJECT: Addendum No. 1 Union County Public Schools FROM: Ramsay Burgin Smith Architects, Inc. 225 North Main Street - Suite 501 Salisbury, NC 28144 General: Information contained
More informationSECTION GYPSUM BOARD ASSEMBLIES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 09260 - A. Metal stud wall framing. Denoted on drawings as "metal studs". B. Metal channel ceiling framing. C. Acoustic insulation and sealant. D. Cementitious
More informationNorthpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017
SECTION 088853 - SECURITY GLAZING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationGuide Specification for the OSI QUAD Window and Door Flashing System
Henkel Corporation 26235 First Avenue Westlake, OH 1-866-591-2178 www.ositough.com Guide Specification for the OSI QUAD Window and Door Flashing System Specifier Note: The purpose of this guide specification
More information1.6 QUALITY ASSURANCE A. Source Limitations for Tile: Obtain tile of each type and color or finish from one source or producer.
SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION GLAZING. A. Section Includes: 1. Glass for other sections referencing this Section.
SECTION 08 8000 GLAZING 1.1 SUMMARY A. Section Includes: 1. Glass for other sections referencing this Section. B. Related Sections: 1. Division 01: Administrative and procedural work requirements. 1.2
More informationSECTION TILING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Ceramic Tile for floor applications. B. Ceramic Tile for wall applications. C. Ceramic accessories. D. Ceramic trim. E. Non-ceramic trim. 1.02 RELATED REQUIREMENTS
More informationPAYING ATTENTION TO DETAIL by Bob Cusumano
PAYING ATTENTION TO DETAIL by Bob Cusumano Painting contractors are often required to install caulk or sealant in exterior joints. Too often, the sealant is simply gunned into the joint until it s filled
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2900 - GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationContractors SCS1001. Contractors SCS1000 sealant is available in 4 colors plus. General Glazing: Glass, plastic, channel or stop.
Contractors SCS1001 Contractors SCS1000 Silicone Sealant Product Description Contractors SCS1000 series silicone adhesive sealants are one part sealants that offer excellent adhesion, weatherability and
More informationHIGH PERFORMANCE SEALANT SOLUTIONS ARCHITECTURAL GLAZING SYSTEMS
HIGH PERFORMANCE SEALANT SOLUTIONS ARCHITECTURAL GLAZING SYSTEMS SERVICE. PERFORMANCE. RESULTS. Unmatched High Performance Sealant Solutions Pecora offers a complete line of high performance products suitable
More informationSikaflex -1a. One-Part Polyurethane, elastomeric sealant/adhesive. Product Description. Product Data
Product Data Sheet Edition 02, 2015 Version no. 12.2014 Sikaflex -1a One-Part Polyurethane, elastomeric sealant/adhesive Product Description Sikaflex- 1a is a premium-grade, high-formance, moisture-cured,
More informationSECTION GYPSUM BOARD SYSTEM
SECTION 09 29 00 GYPSUM BOARD SYSTEM PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More information1-part polyurethane sealant for building joints
Product Data Sheet (Temporary) Edition 03/2010 Sikaflex -Construction (AP) 1-part polyurethane sealant for building joints Product Description Sikaflex -Construction (AP) is a one part, moisture curing,
More informationSECTION BOARD AND BATT INSULATION
SECTION 07212 BOARD AND BATT INSULATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Rigid board insulation at cavity wall construction, perimeter foundation wall, and underside of floor slabs. B. Glass fiber
More informationConstruction. Sikaflex 15 LM. Application Instructions. Sika Corporation
Construction Sikaflex 15 LM Application Instructions Sika Corporation Construction Sikaflex 15 LM A high-performance, low-modulus elastomeric sealant. Where to use: Excellent for moving joints in vertical
More informationCONSTRUCTION PRODUCT LINE CATALOG
CONSTRUCTION PRODUCT LINE CATALOG ADSEAL SILICONE SEALANT ADSEAL Doors and Windows, Siding 4580 series (neutral cure) Our most popular product. Ideal for movement and water proofing joints Meets ASTM C920,
More informationSECTION GYPSUM BOARD ASSEMBLIES
SECTION 09260 GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.1 SUMMARY A. Provide gypsum board assemblies. 1.2 SUBMITTALS A. Product Data: Submit manufacturer's product data and installation instructions for
More informationFIRESTOPPING & SMOKE SEALS
FIRESTOPPING & SMOKE SEALS SPECIFICATION SECTION 07860 1 General 1.1 SECTION INCLUDES.1 Comply with Division 1, General Requirements and Documents referred to therein..2 It is the intent of this section
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-07 92 00 (August 2016) Change 1-08/17 ----------------------------- Preparing Activity: NAVFAC Superseding UFGS-07 92 00 (February 2016) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationStudent Services & Classroom Addition
SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationFINESCREEN 500. Part 1 - General. Section Impact Resistant Cement Board Stucco Wall System 1.1 GENERAL REQUIREMENTS
SPECIFICATION 1022566 Section 09200 FINESCREEN 500 Impact Resistant Cement Board Stucco Wall System Part 1 - General 1.1 GENERAL REQUIREMENTS 1.1.1 Refer to all drawings and other sections of this specification
More informationCDBG Downtown Revitalization Façade Master Plan Project No / Chariton, Iowa May 2015 SECTION FIBER-CEMENT SIDING
SECTION 074646 FIBER-CEMENT SIDING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fiber-cement siding for walls, soffits, and fascia. 2. Related trim, flashings, accessories, and fastenings. 1.2
More informationGeneral Guide to Joint Sealants for Architects
General Guide to Joint Sealants for Architects A fundamental design requirement for any building is protection against the elements of nature. Joint sealants create both a primary and secondary barrier
More informationSERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651
SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows
More informationTHERMAL AND MOISTURE PROTECTION
RELATED DOCUMENTS: The general provisions of the Contract, including General and Supplementary Conditions, and General Requirements, and Division 1 specifications that apply to the work specified in this
More informationSECTION GYPSUM BOARD
SECTION 09250 GYPSUM BOARD PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are collectively applicable
More information1. Division 15 Sections specifying duct and piping penetrations. 2. Division 16 Sections specifying cable and conduit penetrations.
SECTION 07841 - SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationIn accordance with the Department of Labor and Industry s statute , Subd. 11,
In accordance with the Department of Labor and Industry s statute 326.0981, Subd. 11, This educational offering is recognized by the Minnesota Department of Labor and Industry as satisfying 1 hour of credit
More informationPECORA SILICONE SEALANTS
PECORA SILICONE SEALANTS SERVICE. PERFORMANCE. RESULTS. Pecora Silicone Sealants: Protection Against the Elements Pecora offers a complete line of flexible, protective silicone sealants which it has continued
More informationSECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
SECTION 08 4113 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Aluminum entrance doors and frames. 2. Glass infill panels. 3. Door hardware. B. Related Sections:
More informationA. Environmental Limitations: Comply with ASTM C 840 requirements or gypsum board manufacturer's written instructions, whichever are more stringent.
SECTION 092900 - GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More information