XPS THERMAL INSULATION

Transcription

1 THRMAL INSULATION

2 FYOS FYOS A GLOBAL BRAND DLIVRING MARKT LADING INSULATION IN TH UK FYOS is a global brand of Insulation products and solutions manufactured by SOPRMA, installed all over the world. The FYOS Insulation range has been developed specifically for the UK construction industry, and is fully compatible with multiple SOPRMA roofing and waterproofing systems, providing industry professionals with a total insulation and waterproofing solution, from one single source, covered by the SOPRACOVR Insurance backed single point warranty. FYOS insulation, is an industry leading range of extremely high performance, extruded polystyrene () closed cell insulation boards, suitable for many demanding and varied insulation applications including inverted and green roofs including zero fall roof designs in conjunction with SOPRMA zero fall waterproofing systems, floors, walls and below ground works. SUSTAINABL MANUFACTURING Following the SOPRMA COSTRUCTION initiatives to reduce carbon emissions and use of raw materials in product manufacturing, the production process utilises reuse of recycled materials and uses SOPRMA climate-friendly propellants during the manufacture of FYOS products. APPLICATIONS INTRIOR WALL FOUNDATION WALL FLAT ROOF PITCHD ROOF FLOORS & PARKING CAVITY WALL ADVANTAGS + Outstanding energy efficiency + xceptional compressive + xcellent moisture resistance + asy to install + versatility + 100% recyclable + Total waterproofing & Insulation solution compatible with SOPRMA waterproofing XPRTIS xperts in the manufacture of waterproofing and insulation systems, FYOS insulation has been designed and developed by SOPRMA, with extreme performance in mind. The closed cell structure of FYOS insulation boards delivers extremely high compressive and outstanding thermal performance properties. NRGY FFICINY Boasting impressive thermal conductivity, FYOS Lambda values guarantee high thermal insulation performance year after year and can be used in areas where other types of insulation cannot perform. The FYOS range has thermal conductivity ratings as low as 0.029W/mk enabling thinner board thicknesses to be utilised. COMPRSSIV STRNGTH Designed for applications where additional load bearing capability is required, FYOS provides exceptional compressive in the most challenging environments; under slabs, concrete floors, foundations, plaza and podium decks and is also suitable for cold storage applications and underground works. WARRANTY SOPRMA offer the SOPRACOVR Insurancebacked, single-point warranty on all FYOS products. Since FYOS if fully compatible with SOPRMA waterproofing systems, a singlepoint total waterproofing and insulation warranty can be supplied when FYOS is installed together with SOPRMA waterproofing. SIDING

3 INSULATION l l INSULATION GUID INTRIOR WALL WALL ROOF FLOOR SIDING P. FOUNDATION WALL FLAT ROOF PITCHD ROOF FLOORS & PARKING CAVITY WALL & SIDING CW ARTIC CW Artic is a rigid thermal insulation () foam. CW Artic is mainly used as thermal insulation for walls and facades. Dimensions (mm) 2500 x 600 dge profile: tongue-groove Water absorption by v Immersion 250 kpa CW 6 CR 8 SL High Load High Load 9 Thicknesses (mm) R D: (m 2.K/W) * panels per pack m 2 per pack m 2 per pallet Thermal conductivity (W/(m.K) MULTI ROOF 115 Roof 115 is a light weight and easy to install geotextile, that is loose laid over insulation. It is used as a separation layer and protection on the insulation of inverted roofs. Dimensions (m) 1.5 x 50 CR CR is a rigid thermal insulation board made of extruded polystyrene () foam produced according to climate-friendly CR is mainly used as thermal insulation for zero fall, flat and pitched roofs, floors, walls, facades and underground constructions. On zero fall and flat roofs it must be used in combination with ballast. dge profile: smooth edge 300 kpa Thicknesses (mm) 30 * 40 * 50 * 60 * 80 * 100 * 120 * R D: (m 2.K/W) * panels per pack m 2 per pack m 2 per pallet Thermal conductivity (W/(m.K)

4 INSULATION l l INSULATION SL SL is a rigid thermal insulation board made of extruded polystyrene () foam produced according to climate-friendly SL is mainly used as thermal insulation for zero fall, flat and pitched roofs, floor and underground constructions. On zero fall and flat roofs it must be used in combination with ballast x 600 dge profile: rebate edge 300 kpa is a rigid thermal insulation () foam produced according to climate-friendly 500 is mainly used as thermal insulation for floors and car parks where a high compressive is required. dge profile: rebate edge 500 kpa Thicknesses (mm) 30 * 40 * 50 * 60 * 80 * 100 * 120 * R D: (m 2.K/W) * panels per pack m 2 per pack: 1250 x m 2 per pack: 2500 x packs per pallet m 2 per pallet 1250 x m 2 per pallet 2500 x Thermal conductivity (W/(m.K) MULTI 20 MULTI 20 is a rigid thermal insulation () foam produced according to climatefriendly MULTI 20 is mainly used as thermal insulation for floors and walls. dge profile: smooth edge Surface: rough 250 kpa Thicknesses (mm) 20 R D: (m 2.K/W) * 0.6 panels per pack 21 m 2 per pack Packs per pallet 12 m 2 per pallet 189 Thermal conductivity (W/(m.K) Thicknesses (mm) R D: (m 2.K/W) * panels per pack m 2 per pack m 2 per pallet Thermal conductivity (W/(m.K) is a rigid thermal insulation () foam produced according to climate-friendly 700 is mainly used as thermal insulation for floors and car parks where a very high compressive is required. dge profile: rebate edge 700 kpa Thicknesses (mm) R D: (m 2.K/W) * panels per pack m 2 per pack m 2 per pallet Thermal conductivity (W/(m.K) 0,034 0,034 0,034 0,036 0,036 0,

5 CD0062.a_en-UK For further technical support please contact SOPRMA UK: T: +44 (0) : info@soprema.co.uk 4 Lancaster Way arls Colne Business Park Colchester ssex +44 (0) info@soprema.co.uk SOPRMA group attaches great importance to quality and therefore operates in accordance with the internationally recognised, independently audited and certified quality system N ISO ISO SOPRMA group reserves the right, depending on the evolution of knowledge and techniques, without notice to change the composition and terms of use of its products.