METAL STORAGE TECHNICAL FEATURES
|
|
- Solomon Lewis Poole
- 5 years ago
- Views:
Transcription
1 METL STORGE TECHNICL FETURES 06/2016
2 SLT DOORS CINET DESK HEIGHT LOW medium HIGH OVERHED Slat doors Top Melamine decorative top Framework Silver / Dark grey / Off-wite Handle luminium Lock OPEN CINETS DESK HEIGHT LOW INTERMEDITE medium MEDIUM-HIGH HIGHT Top Melamine decorative top Framework Silver / Dark grey / Off-wite Forma 5 Storage 02
3 HINGED DOORS CINET LOW intermediate medium medium-high HIGH Top melamine (decorative) Framework Door Door Melamine Handle luminium Lock Levellers Forma 5 Storage 03
4 sliding DOORS CINET LOW intermediate medium medium-high HIGH Framework Door Melamine Top melamine (decorative) Selves Handle luminium Lock glass inged DOORS CINET DESK HEIGHT LOW INTERMEDITE medium Framework Top Door Glass Selves Handle luminium Forma 5 Storage 04
5 cabinets wit low doors Framework Top Selves Handle luminium Lock filing drawer Framework Grey / Dark grey / Off-wite Drawer Melamine Lock nti-tilt system Handle luminium Forma 5 Storage 05
6 ELEMENT DESCRIPTION Structure FRMEWORK It is formed by several 0,8-1,2 mm tick low carbon content cold laminated seet pieces, depending on te function and position inside te cabinet. Once te pieces ave been assembled, tey are all welded togeter. Later, it is covered wit 100 micron tick powder epoxy paint, polymerized at 220 ºC. It as rails at te top to ang files and optimize te inner space. MELMINE TOP: 19 mm tick melamine particle board wit rectangular sape and 1,2 mm tick termofused edges at te front and 0,5 mm tick edges at te remaining perimeter. SHELF 0,8 mm tick cold laminated steel, covered wit 100 micron tick epoxy paint, polymerized at 220ºC. 25 mm ig and folded to increase te strengt. Te front folds provide an option to ang files. It angs from bot sides of te inner laterals troug a slef-older. Selves may be ig adjusted every 25 mm. HINGED DOOR METL DOOR 0,8 mm tick cold laminates steel, reinforced wit 2 vertical omegas, also made of 0,8 mm tick cold laminated steel te front one and 1,2 mm tick te rear one. Tey are welded togeter to provide strengt to te door. Painted wit 100 micron tick epoxy paint and polymerized at 220ºC. lock is included troug rotational vertical rods, fixed to te floor and ceiling. Eac door as aluminium andles and rubber stops to avoid noises. MELMINE DOOR 19 mm tick melamine particle board wit rectangular sape and 1,2 mm tick termofused edges around te perimeter. luminium andles fixed to 2 points and rotational vertical rod lock, fixed to te floor and te ceiling. Melamine Glass GLSS DOORS: 4 mm tick etced glass. nodyzed aluminium frame. SLT DOOR 2 slat doors wit 8-10 slats, depending on te cabinet widt. Eac door is finised wit a final aluminium slat, covered wit polyamide. Te final slat includes skid for a better sliding. Te set also includes some polypropylene guides for a smoot and easy performance. Forma 5 Storage 06
7 ELEMENT DESCRIPTION METL FILE DRWER FRMEWORK Made of 0,8-1,2 mm tick cold laminated steel seet, wit low carbon content and finised wit 100 micron powder paint, polymerized. Te pieces are welded togeter. 2 1,5 mm tick omegas are included at te lower side to support te levellers. Te guides include a quick assembly system to facilitate te extraction. Te guides are go on inner omegas. Te lock goes inside te framework to block te opening of more tan one drawer at te same time. DRWER Made of 0,8 mm tick cold laminated steel seet, wit low carbon content and 100 micron tick black epoxy paint, polymerized at 220 ºC. 560 mm deep, 403 mm wide and 264 mm ig. Quick assembly elements included. It may include DIN 4 files. It includes metal frames to ang te files. Supported by 2 total extraction ball guides. METL DRWER FRONT Made of 0,8 mm tick cold laminated steel seet, wit low carbon content and 100 micron tick polymerized powder epoxy paint. 2 pieces welded togeter: front and inner front. Fixed to te drawer troug metric screws. Te andle is made of conformed seet and folded to avoid accidental cuts. It includes an overviewer to identify te content at te upper rigt side. Fronts get inlayed regarding te laterals. MELMINE DRWER FRONT Wit 10 mm tick particles board and 1,2 mm termofused edges in its wole perimeter. Te andle is made of conformed seet and folded to avoid accidental cuts. It includes an overviewer to identify te content at te upper rigt side. Fronts get inlayed regarding te laterals. FITTINGS Metric tread screws wit tooted waser built. Central locking wit anti-tilt security system consisting of a vertical falleba key wit a latces system tat block te lock drawers once anoter one is open, preventing more tan one may be opened simultaneously to avoid accidental falls of te file drawer. Sliding balls system wit a 35 mm profile eigt full extension and wit a load capacity of 35 kg per drawer. Levelers to adjust te furniture once placed. Forma 5 Storage 07
8 CONFIGURTIONS ND DIMENSIONS HINGED DOORS CINETS. METL OR MELMINE DESK HEIGHT CINET xx 80 x 45 x 71 LOW CINET xx 100 x 45 x 71 INTERMEDITE CINET xx 80 x 45 x x 45 x 106 tura de pedidos ura de pedidos 160 rcivos rcivos 74 rcivos MEDIUM CINET xx 80 x 45 x x 45 x 160 MEDIUM-HIGH CINET xx 80 x 45 x x 45 x 180 HIGH CINET xx 80 x 45 x x 45 x ura de pedidos rcivos 74 rcivos CINETS WITH LOW DOORS. METL OR MELMINE MEDIUM CINET xx 80 x 45 x x 45 x 160 MEDIUM-HIGH CINET xx 80 x 45 x x 45 x 180 HIGH CINET xx 80 x 45 x x 45 x ura de pedidos rcivos rcivos ura de pedidos Forma 5 Storage 08
9 CONFIGURTIONS ND DIMENSIONS ltura 200 rcivos GLSS HINGED DOORS ltura 160 DESK HEIGHT CINET xx 80 x 45 x 71 LOW CINET xx 100 x 45 x 71 INTERMEDITE CINET xx 80 x 45 x x 45 x 106 ltura 200 ltura 200 ltura 160 ltura 110 MEDIUM CINET rcivos xx 80 x 45 x x 45 x 160 ltura 160 ltura 110 ltura 74 rcivos OPEN CINETS DESK HEIGHT CINET ltura 200 ltura 110 ltura 74 xx LOW CINET xx INTERMEDITE CINET xx Estructura de pedidos ltura x 45 x 71 rcivos rcivos 100 x 45 x x 45 x x 45 x 106 Estructura de pedidos ltura 74 rcivos ltura 180 ltura 180 MEDIUM CINET xx 80 x 45 x x 45 x 160 MEDIUM-HIGH CINET xx 80 x 45 x x 45 x 180 HIGH CINET xx 80 x 45 x x 45 x 198 ltura 110 ltura 200 Estructura de pedidos ltura 74 rcivos ltura 160 ltura 180 Forma 5 Storage 09
10 CONFIGURTIONS ND DIMENSIONS SLIDING DOORS CINETS. METL OR MELMINE rcivos LOW CINET x x 120 x 45 x 71 INTERMEDITE CINET x x 120 x 45 x 106 rcivos MEDIUM CINET x x 120 x 45 x 160 MEDIUM-HIGH CINET x x 120 x 45 x 180 HIGH CINET rcivos x x 120 x 45 x 198 rcivos Forma 5 Storage 10
11 CONFIGURTIONS ND DIMENSIONS SLT DOORS CINETS rcivos DESK HEIGHT CINET LOW CINET x x x x 80 x 45 x x 45 x 71 INTERMEDITE CINET x x 100 x 45 x x 45 x 106 rcivos MEDIUM CINET x x 100 x 45 x x 45 x 160 MEDIUM-HIGH CINET x x 100 x 45 x x 45 x 198 rcivos HIGH CINET x x 100 x 45 x x 45 x 50 rcivos FILE DRWERS rcivos METL OR MELMINE FRONT PNEL x x 47 x 62 x 132 Forma 5 Storage 11
12 PRODUCT ENVIRONMENTL STTEMENT Life Cycle nalysis METL STORGE Program RW MTERILS Raw Materials Kg % Steel 28,91 59 Plastic 0,25 0,5 Wood 19,60 40 Upolsteries / Filling material 0,25 0,5 % Recycled material= 51% % Recyclable materials= 85% Ecodesign Results reaced during te life cycle stages MTERILS Wood 70% of te wood material is recycled, as PEFC/FSC and complies witin te E1 standard. Steel 15%-99% recycled material. Upolstered / Filling material Filling witout HCFC and upolsteries witout COVs emisions. ccredited by Okotext. Plastic 30%-40% recycled material. Paintings Podwer painting witout COV emissions Packings 100% recyclable wit inks wit no solvents. Forma 5 Storage 12
13 PRODUCT ENVIRONMENTL STTEMENT PRODUCTION Raw materials use optimization oard, upolstery and steel tubes cut. Renewable energies use reducing te CO2 emissions. (Potovoltaic pannels) Energy saving measures in all production process COV global emission reduction of te production processes by 70%. Podwer painting ecovery of 93% of te non deposited painting Glue removal from te upolstery Te facilities ave an internal sewage for liquid waste. Green points at te factory 100% waste recycling at production process ans dangerous waste special treatment. TRNSPORT Cardboard use opmitization of te packings Cardboard and packing materials use reduction Flat packings and small bulks to optimize te space. Solid waste compacter wic reduces transport and emissions. Ligt volumes and weigts Transport fleet renewal reducing by 28% te fuel consumption. Suppliers area reduction Local market power and less pollution at transport. USE Easy maintenance and cleaning witout solvents. Forma 5 guarantee Te igest quality for materials to provide a 10 year average life of te product. Useful life optimization of te product due to a standarized and modular design. Te boards wit no E1 particle emission. END LIFE Easy unpacking for te recyclability or compound reuse. Piece standarization for te use. Recycled materials used for products (% recyclability): Wood is 100% recyclable. Steel is 100% recyclable. Wit no air or water pollution wile removing waste. Returnable, recyclable and reusable packing Product recyclability 99% Forma 5 Storage 13
14 MINTENNCE ND CLENING GUIDE MELMINE PIECES Rub te dirty spots wit a wet clot wit PH neutral soap. PLSTIC PIECES Rub te dirty spots wit a wet clot wit PH neutral soap. metl PIECES 1 Rub te dirty spots wit a wet clot wit PH neutral soap. 2 Polised aluminium pieces can ave teir polis bak by covering and rubbing tem wit a dry cottom clot. glass pieces Rub te dirty spots wit a wet clot wit PH neutral soap. Do not use abrasive products in any case. CERTIFICTES Forma 5 certifies tat te Storage program as passed all tests provided by our intern Quality Department and te Tecnological Researc Center (CIDEMCO) wit satisfactoru results: UNE-EN 15372:2008: Furniture. Resistance, durability and security. Requirements for non-domestic use tables. UNE EN :2005: Office furniture. Storage cabinets. Part 2: Security requirements. UNE EN :2005: Office furniture. Storage cabinets. Part 3: Testing metods to determine te structure stability and resistance. UNE EN 14074:2005: Office furniture. Desks and storage cabinets. Testing metods to determine te structure stability and resistance of moving parts Developed by Forma 5 R&D
TECHNICAL FEATURES SEMI-EXECUTIVE
TECHNICL FETURES SEMI-EXECUTIVE 07/2018 DESK + HIGH CINET High cabinet 310 / 250 cm width Top 30 mm melamine Leg frame F25 / M10 / V30 Semi-executive 2 DESK + CREDENZ Plateau 30 mm melamine Credenza Leg
More informationCORNER TECHNICAL FEATURES
CORNER TECHNICAL FEATURES 04/2017 FIRST RECEPTION SEAT Backrest Inner metal structure covered by high density upholstered polyurethane injected foam Interior 11 mm steel rod Seat 16 mm thick inner particle
More informationTECHNICAL FEATURES M10
TECHNICL FETURES M10 10/2018 DESK SINGLE DESK DOULE DESK RETURN DESK ENCH DESK MEETING TLE For anti-electrostatic solutions, please ask us the conditions. Sliding top Optional Top Melamine Glass Steal
More informationTECHNICAL FEATURES TOM
TECHNICAL FEATURES TOM 02/2018 08/2018 CONTRACT CHAIR SLED BASE STATIONARY Backrest Shell 4 mm aluminium sheet Structure 11 mm sled-base Seat Anti-sliding glides Semi-transparent polyester resin DIMENSIONS
More informationSkala TECHNICAL FEATURES
Skala TECHNICAL FEATURES Skala is the result of the study of people, health at work and the application of ergonomic guidelines for office desks. The height adjustment of Skala expands the natural use
More informationResidential and public use. Permanently damp environments and direct contact with water. Outdoors, use pro-part inox. Do not use in pools.
Data seet pro-telo Metal decorative profile for ceramic wall tiles. Flangeless metallic line for tiles of any tickness. Available in a wide variety of materials, finises and dimensions, tey represent an
More informationResidential and public use. Permanently damp environments and direct contact with water. Outdoors, use pro-part inox. Do not use in pools.
Data seet pro-telo Metal decorative profile for ceramic wall tiles. Flangeless metallic line for tiles of any tickness. Available in a wide variety of materials, finises and dimensions, tey represent an
More informationPRISMA. By Sylvain Carlet & Isern Serra.
By Sylvain Carlet & Isern Serra Programme STRAIGHT DESKS - cm WIDTH DESKS WITH CREDENZA SUPPORT AUXILIARY DESKS AND RETURNS 140 cm 1 cm 1 cm 210 cm 210 cm 210 cm Auxiliary Desk cm Auxiliary desk return
More informationSPACIO. By Sigfrido Bilbao.
By Sigfrido Bilbao LEGS DESCRIPTION Polypropylene (P.P) back with % fiberglass. Wide range of colours. Optional Polypropylene (P.P) Arms reinforced with fibre glass. Anti-skid surface Seat: -shell, moulded
More informationSTACKABLE STORAGE UNITS
Code: FTA 1007 045 Description: MFC structure, without doors, with doors, with tambour doors, drawers and/or pulling drawers FEATURES Technical Profile ChARACTERISTICS MFC shelves or Metal shelves MFC,
More informationMIT. Code: FTS Description: Operative chair, general use
MIT Code: FTS 007 00 Description: Operative chair, general use mit... more confort Made with flexible polyurethane. MORE RESISTANT, MORE ELASTIC, MORE COMFORTABLE. A product developed from an internal
More informationMETAL STORAGES. By Actiu. -
S By Actiu Increasingly, cabinets are used as elements of separation of work environments. The proximity and easy accessibility of these items provides a better performance in daily work cm 160 cm 10 cm
More informationSTACKABLE STORAGE UNITS
By Actiu www.actiu.comv01 - CHARACTERISTICS MFC shelves or Metal shelves MFC, Frosted or Dark glass doors Inner accessories, filing drawers, shelves or drawers Metal base for cm and cm width Anti-skid
More informationPassing services without the need of routing the walls.
Data seet Metallic skirting for floor tile coverings. Metallic profiles for skirtings. Tey ave a ig mecanical resistance wit a functional, modern design. Specially recommended for office floors and raised
More informationGARAGE STORAGE & ORGANIZATION
3:22 PM Page 1 FEATURES Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization
More informationBBL by JM Massana - JM Tremoleda & E Juanola
Technical specifications (1/9) GENERAL DESCRIPTION Shelving system and complements for furnishing libraries. The singularity of its design is based on the incorporation of Compact Laminate (HPL) into its
More informationINFORM. Code: FTSM Description: Reception counters
INFORM Code: FTSM 007 008 Description: Reception counters INFORM Reception Counters Technical Profile 5 mm MFC panels worktops. Available in or maple. Different ergonomics shapes Front panel is available
More informationFloor decoration. Residential and public use. Permanently damp environments and direct contact with water.
Data seet Rigt angle profile for corners and wall and floor tile coverings. Decorative use as a metallic line. is a rigt angle, corner saped profile, wit bot sides of te same lengt. Tis design makes a
More informationUKA. Code: FTS Description: Chair with versatility and natural lines
Code: FTS 007 077 Description: Chair with versatility and natural lines LEGS Technical Profile DESCRIPTION Shell made from polypropylene (PP) with 0 % fiber glass. Anti-skid surface Shell. Wide offer of
More informationVITAL. Code: FTM Description: Desks without and with the front beam. Rectangular legs and frame
Code: FTM 1007 016 Description: Desks without and with the front beam. Rectangular legs and frame FEATURES Single desks Desk-mounted and Split screens Worktops available with different finishes and colours
More informationSchools and nurseries. Description of furniture
Schools and nurseries Description of furniture ST Skoleinventar A/S. January 201 201 ST Skoleinventar A/S CONTENTS 1.0 CUPBOARDS 1.1 Carcass 1.2 Shelves 1.3 Plinths 1. Infill panels 1.5 Light E 2.0 DOORS
More informationANALYSIS OF TENSION MEMBERS
CHATER Structural Steel Design LRFD Metod Tird Edition ANALYSIS OF TENSION MEMBERS A. J. Clark Scool of Engineering Department of Civil and Environmental Engineering art II Structural Steel Design and
More informationVITAL. Technical profile. Bench system. Code: FTM Description: Desks with rectangular legs and frames
VITAL Code: Description: Desks with rectangular legs and frames VITAL FEATURES desks with recessed legs Quick and easy assembling system Desk-mounted screens Worktops available with different finishes
More informationVITAL. By I+D+i Actiu.
VITAL By I+D+i Actiu THE VITAL PROGRAM VITAL RECTANGULAR DESKS: 96 140 1 140 67 67 H10 H11 H12 H13 H14 H15 H3 H4 H25 1 EXECUTIVE AND MEETING DESKS: 88 1 100 200 220 240 320 H19 H16 H17 H18 H43 H44 H45
More informationPLEK By Alegre Studio
By Alegre Studio Technical profile Plek... 02 Price List... 05 Technical Profile 4 LEGS DESCRIPTION 1 ABS seat and back rest rest made of two 5 mm thickness pieces fixed together. Partially folding 2 position
More informationLINK. By ITEMDesign Works Javier Cuñado.
By ITEMDesign Works Javier Cuñado WHAT IS? The new trends in office design suggest combining privacy with open and collaborative offices, where creativity and communication flow in a natural way. This
More informationResidential and public use. Permanently damp environments and direct contact with water. Do not use in pools.
Data seet pro-corner Metallic profile for protecting wall tiles corners. Rigt angle, metallic profiles for protecting corners. Most of te pro-corner models are installed after te tile, wic implies a small
More informationPRODUCT DESCRIPTION. Table top: 13 mm compact top / 39 mm chipboard
FREE DESK High-quality furniture for personal and concentrated work in management. The Free Desk is designed as a premium computer workplace. The electrical height adjustability of the table enables spontaneous
More informationA Whittan Group Company. Stormor Shelving Medium Duty Shelving System
A Whittan Group Company Stormor Shelving Medium Duty Shelving System STORMOR SHELVING - MULTI-PURPOSE FULLY ADJUSTABLE SHELVING SYSTEM Stormor is the leading shelving system for medium duty applications.
More informationHALLOWELL FORT KNOX Modular Utility Storage and Workbench System Specifications
General: All modular components shall be "FORT KNOX Modular Utility Storage and Workbench System" components as manufactured by Hallowell or approved equal. All workbench pedestals, cabinets and lockers
More informationVITAL. By I+D+i Actiu.
By I+D+i Actiu THE PROGRAM RECTANGULAR DESKS cm H0 96 cm cm cm cm cm H H H H H5 cm cm cm 67 67 H H5 EXECUTIVE AND MEETING DESKS cm 0 cm 0 cm cm 00 cm 00 cm cm H9 H6 H7 H8 H H H5 0 cm cm cm cm H8 H BENCH
More informationRAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES
RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES (A.P Government Act 18 of 2008) RGUKT- Nuzvid Institute, Krishna District, Andhra Pradesh-521202 Tele No: 08656-235557 E-mail Id: ao.nuz@rgukt.in Ref No:
More informationStormor Shelving Medium Duty Shelving System
Stormor Shelving Medium Duty Shelving System STORMOR SHELVING- MULTI-PURPOSE FULLY ADJUSTABLE SHELVING SYSTEM Stormor is the leading shelving system for medium duty applications. With a choice of 3 upright
More informationSTERILE CONTAINER SYSTEMS
»» 1/2 Half Size 1/2 STANDARD MODEL 280 mm 285 mm Specificiations Lid (Perforated) Lid (Perforated) Safety Lid Safety Lid Sizes Box (Non Perforated) Box (Perforated) Box (Non Perforated) Box (Perforated)
More informationTABULA TABLES - TAR 30
TABULA TABLES - TAR 30 By Actiu TÁBULA TABLES TABULA tables are a canteen and meeting tables program. These tables can be used on several environments due to its different models and styles. Tabula offers
More informationVAULT. VIntegrated Storage and Filing wall
vault VIntegrated Storage and Filing wall VAULT 20 Filing, storage and space division: VAULT is the answer to all of these challenges. With clean lines and minimal base heights, it is compatible with Dwel
More informationOFIMAT. Code: FTSM Description: Operative program with functional benefits
OFIMAT Code: FTSM 1007 061 Description: Operative program with functional benefits OFIMAT FEATURES Technical Profile 25 mm thickness MFC tops Optional desk-mounted screens Return Optional cable management
More informationSingle tier modular shelving system
Datasheet ENGLISH Single tier modular shelving system RS modular shelving This storage system is the latest in modular racking and has been designed as a fully integrated system, in which each bay is easy
More informationLINEA PLANA PRODUCT SHEET. This product sheet complies with the provisions of Italian Law Decree no. 206/2005 the "Consumer Code"
LINEA PLANA PRODUCT SHEET This product sheet complies with the provisions of Italian Law Decree no. 206/2005 the "Consumer Code" Pagina 1 KITCHEN LINEA GROOVE SYSTEMS: "PIATTA" aluminium spacer in a stainless,
More informationstorage Filing Cabinet
Filing Cabinet Filing Cabinet features SGS Tested to comply with AS5079.2-2003 (exceeds the standard by 5Kg per drawer) Anti-tilt feature to prevent tipping Full width steel handle Full Extension Ball
More informationPanora View Windows & Doors. For a better view
Panora View Windows & Doors For a better view A NEW SOLUTION FOR WINDOWS & DOORS for a better view Libart is proud to announce te revolutionary next step in doors and windows. For centuries tere ave been
More informationMOBILITY PLUS. By ITEMDesign Works
By ITEMDesign Works Range of Mobility Plus... 02 General Characteristics... 04 Scheme Mobility Plus and Surface finishes available... 05 Accessories... 06 Ecodesign and Normes... 0 Mobility Desks with
More information"R" Heavy-Duty Modular Cabinet
"R" Heavy-Duty Modular Cabinet "R" Heavy-Duty Modular Cabinet The heavy-duty cabinet, designed for intensive use, present the perfect fit to better respond to our customers needs. It is distinguished by
More informationD300. By Actiu.
D00 By Actiu D00 CHARACTERISTICS ABS Top Trim mm thickness and 7 width. Silver or dark grey. Different sizes; 7, 0 and 8 for vertical used and 60,80,00 and 0 width to be used at the top of the modules.
More informationKADOS. By Lledo&Campos.
By Lledo&Campos DESCRIPTION Swivel base chair. 5 Stars. Anti-skid castors. Seat and back in flexible polyurethane PU flexible 0kg/m density, moulded on metal frame. Upholstered. Arms: - Moulded aluminium
More informationCHAPTER 5 GENERAL BUILDING LIMITATIONS
CHAPTER GENERAL BUILDING LIMITATIONS SECTION 0 GENERAL 0. Scope. Provisions of tis capter sall govern te eigt and area of buildings. For definitions, see Capter. SECTION 0 DEFINITIONS SECTION 03 HEIGHT
More informationMODEL: ASCEND SIT/STAND COMMAND CENTER CONSOLES
2015 WINSTED CORPORATION EMAIL: info@winsted.com WEB: winsted.com TEL: 800.447.2257 or 952.944.9050 FAX: 800.421.3839 or 952.944.1546 10901 Hampshire Ave. So. Minneapolis, Minnesota 55438-2385 U.S.A 1)
More informationWe have devoloped the drain culture
We ave devoloped te drain culture Sukar is a company wit 100% Turkis capital producing Installation and Insulation Drains in Turkey since 1998. Wit te novelties it as made since its foundation, Sukar as
More informationWe have devoloped the drain culture
We ave devoloped te drain culture Sukar is a company wit 100% Turkis capital producing Installation and Insulation Drains in Turkey since 1998. Wit te novelties it as made since its foundation, Sukar as
More informationHEAVY DUTY ALL-METAL EXPANSION JOINT SOLUTIONS FOR LARGE TRAFFIC LOADS
HEAVY DUTY ALL-METAL EXPANSION JOINT SOLUTIONS FOR LARGE TRAFFIC LOADS HARD WEARING, MAINTENANCE-FREE AND LONG LASTING YOU FIRST. MIGUA is one of Europe s leading experts in te design, manufacture and
More informationAdds Value to your Building... Catalog 2016/2
Adds Value to your Building... Catalog 2016/2 We ave developed te drain culture Sukar is a company wit 100% Turkis capital producing Installation and Insulation Drains in Turkey since 1998. Wit te novelties
More informationtechnicalmonograph Natural ventilation strategies for refurbishment projects Can we avoid mechanical ventilation?
tecnicalmonograp 3 Natural ventilation strategies for refurbisment projects Tis tecnical monograp is one of a set produced as part of te REVIVAL project an EU Energie Programme supported demonstration
More informationV1703 SYSTEM DESCRIP TION JB 2000 AT HOME WITH ANY STYLE
V1703 SYSTEM DESCRIP TION JB 2000 AT HOME WITH ANY STYLE TURE FINISHING PARTITIONS CEILINGS DOORS FURNITURE FINISHING PARTITIONS CEILINGS DOO JB 2000 The JB 2000 relocatable partition wall is a modular,
More informationRetractable Seating System
Retractable Seating System Code Compliance Features Structure of Retractable Platform Storage Types of Retractable Seating System Code Compliance Features 1. Design of steel structures and connection is
More informationPLASTIC MATERIALS COLOURS. Plastic colour code. Steel colour. TRESTON Industrial Furniture TRESTON ESD products
STORAGE SYSTEMS WELL CONSIDERED, EFFICIENT SMALL PARTS STORAGE Good storage planning requires the combination of many elements. Treston offer a flexible and first class range of storage solutions to build
More informationCasework Midmark Animal Health Products
Specifications Midmark Modular Casework Quality ball bearing glides Powder coated paint finish LEED compliant composite wood panels One-piece molded polystyrene drawers 12 mil polymer covering on all door
More informationCold Rooms Kide
COLD ROOMS Cold Rooms 2 Cold under control KIDE it is a business Group manufacturer of cold-rooms, insulation panels, insulated doors, refrigeration units and drying units, offering integral solutions
More informationSliding Door Systems
Sliding Door Systems Standard Sliding System Reference Brand: Sapa Building System Plaisance 24 GENERAL DESCRIPTION Sliding window and door system with a frame depth of 50 mm (two rail version), 97mm (three
More informationUDL. up to QUICK. boltless. Expo Shelving. Adaptable Boltless System
UDL up to QUICK 500 assembly system kg boltless Expo Shelving Adaptable Boltless System Expo shelving has been sold to thousands of customers for the past 2 years Index 5 6-7 8-9 10-11 1 1-15 16 18 19
More informationMODEL: SLAT-WALL COMMAND CENTER CONSOLES
2015 WINSTED CORPORATION EMAIL: info@winsted.com WEB: winsted.com TEL: 800.447.2257 or 952.944.9050 FAX: 800.421.3839 or 952.944.1546 10901 Hampshire Ave. So. Minneapolis, Minnesota 55438-2385 U.S.A MODEL:
More informationu.r standard finishes: chrome with polished aluminium feet or black powdercoat with polished aluminium feet
carbon neutral u.r is an environmentally considered table system that is flexible and versatile, and provides for a complete family of table product options. The family of products allows the specifier
More informationMODEL: SPECTRUM-2 - CONSOLES
2015 WINSTED CORPORATION EMAIL: info@winsted.com WEB: winsted.com TEL: 800.447.2257 or 952.944.9050 FAX: 800.421.3839 or 952.944.1546 10901 Hampshire Ave. So. Minneapolis, Minnesota 55438-2385 U.S.A MODEL:
More informationMovibloc Mobile Shelving / Mobile Lockers
Movibloc Mobile Shelving / Mobile Lockers Mobile Shelving Mobile Shelving System Movibloc is a compact archive storage system com prising of shelving or lockers mounted on mobile bases which slide along
More informationNETbox Wall Mounting CABINETs
NETbox Wall Mounting CABINETs 9 NETbox Wall Mounting Cabinets FAMILY W=mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an
More informationM I N I C O L D R O O M TECHNICAL SPECIFICATIONS
M I N I C O L D R O O M TECHNICAL SPECIFICATIONS Page.1 INTRODUCTION The Isark range, within the ColdKit range of cold rooms, was developed to combine: Aesthetics and quality Ease of transport and assembly
More informationForging. Types of Forging Dies. Open-Die Forging. Outline. Forging. Types of forging Forging analysis Examples
Forging Outline Forging Types of forging Forging analysis Examples Oldest of te metal forming operations, dating from about 5000 B C Components: engine cranksafts, connecting rods, gears, aircraft structural
More informationAn innovative and versatile concept offering countless solutions for all your storage needs from simple single bays to multi-tier installations.
S T E E L S H E E T S H E L V I N G An innovative and versatile concept offering countless solutions for all your storage needs from simple single bays to multi-tier installations. Technical characteristics:
More information19 DYNAmic Basic Cabinets / W:600mm
19 DYNAmic Basic Cabinets / W: W= DYNAmic Basic Series Free Standing Cabinets DYNAmic Basic series Networking Enclosures, provide maximum optimization resulted to an optimum performance in between quality
More informationLogistics and industry. Consignment sales
Logistics and industry Consignment sales Saving time and money for consignment sales Wanzl - a renowned name in the trade for more than 50 years and still favoured today for its sophisticated universal
More informationMODEL: ASCEND SIT/STAND COMMAND CENTER CONSOLES
2015 WINSTED CORPORATION 1) GENERAL DESCRIPTION 1.1 Ascend Command Center Consoles. See Appendix A - D for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting
More informationLight-Duty Cabinet. The Rousseau Advantages LIGHT-DUTY CABINET. For More Information: CABINET
Light-Duty Cabinet For More Information: 866-333-0728 The Rousseau Advantages 100 lb capacity per. 100% access to contents. Variety of accessories available : hanging file bars, plastic bins and dividers.
More informationAir Atomizing Design, Features & Introduction
Atomizing Design, Features & Introduction atomizing spray nozzles produces fine mist spray wit te elp of compressed air, liquid breaks into small droplets as air provides saring effects on liquid droplets.
More informationVentura Office Partitions. Technical guide
Office Partitions Technical guide - General Despite its minimalistic and sleek design, is a genuine, relocatable office partition in line with other products in the Triplan system. This relocatable office
More informationWATERTIGHT EXPANSION JOINT SYSTEMS
WATERTIGHT EXPANSION JOINT SYSTEMS FOR BITUMINOUS LAYERS, COATINGS, LIQUID SEALANTS, AND INSTALLATION IN CONCRETE: PERMANENT WATERTIGHT, TRAFFICABLE AND ROBUST. MIGUTAN YOU FIRST. MIGUA is one of Europe
More informationFEM European Materials Handling Federation
FEM European Materials Handling Federation www.fem-eur.com 0.01.017 FEM 4.005 (4t Edition) Guideline / Indurial trucks 90 acking aisle widt Tale of Contents Introduction... 3 1 Scope... 3 Normative References...
More informationShelving. Storage systems for small parts
Shelving is available in many configurations in either low or high bay, and in multi-tier or mobile systems, for general storage or archive situations. The system is easily adjustable in height in increments
More informationCONTENTS. B. System Design and Performance Requirements
12245 Laboratory Casework This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or
More information0.3 to 0.18 W/mK (depending on construction) by CSTB
CI/SfB Xt6 September 2017 Contents System components 2 Applications 3 resistances 4-6 considerations 7 Installation guidance 8 Isotec Termally Insulated Balcony Connectors Ancon Isotec Isotec is a ig performance
More informationConsulting Design Manufacture Supply Installation
Consulting Design Manufacture Supply Installation 1 ISO 9001:2008 2 Index Super Market Racks 05 Boltless Display Racks ( Model 1 ) 09 Boltless Display Racks ( Model 2 ) 10 Pallet Rack Without Decking -
More informationCONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS
PCB CARRIERS CONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS Non Conductive Adjustable PCB Carrier NO.5 Conductive Adjustable PCB Carrier NO. 5 ALKON adjustable PCB Carriers can be used for protection
More informationCONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS
PCB CARRIERS CONDUCTIVE AND NON CONDUCTIVE ADJUSTABLE PCB CARRIERS ALKON adjustable PCB Carriers can be used for protection of boards during storage or transport in assembly line or integrate with automatic
More informationSPECIFICATIONS PORTER No PORTABLE BASKETBALL BACKSTOP SYSTEM (FOR INDOOR OR OUTDOOR USE) WITH FAN FIBERGLASS BACKBOARD
SPECIFICATIONS PORTER No. 00535-940 PORTABLE BASKETBALL BACKSTOP SYSTEM (FOR INDOOR OR OUTDOOR USE) WITH FAN FIBERGLASS BACKBOARD Unit is designed for use in elementary schools, training camps, YMCA, park
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationWAREHOUSE. For Product Safety and Operation Manuals please visit our website at
i WAREHOUSE Dock Plate..........................................321-322 Fork E x tensions......................................323-324 Lockers Employee Lockers........................... 325-326 Electronic
More informationNETbox Wall Mounting CABINETs
NETbox Wall Mounting CABINETs 9 NETbox Wall Mounting Cabinets FAMILY W=mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an
More information50 N E T b o x Wall Mounting C A B I N E T s
50 www.lande.com.tr N E T b o x Wall Mounting C A B I N E T s W=600mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an optimum
More informationPARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET
PARTITIONS WITH MONOLITHIC PANELS SLIM-GLASS SOLUTIONS TECHNICAL SHEET The SLIM-GLASS SOLUTIONS partition with monolithic panel is a system to divide indoor spaces with a lower of 40 mm of width and 25
More information"R" Heavy-Duty Mobile Cabinet
"R" Heavy-Duty Mobile Cabinet R5BHG-3403 The "R" mobile cabinet is one of the safest on the market. The Lock-In mechanism is activated with one hand, leaving the other free. All of this, thanks to a simple
More information19 EURObox Cabinets / W:600mm
19 EURObox Cabinets / W:600mm W=600mm EURObox Free Standing Cabinets EURObox Free Standing cabinets are designed to perform for the best cost conduction to customers, with the strong and sturdy design,
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationDelta Level 1000 Hinged Lip Pit Mounted & Suspended Frame Dock Leveller
Delta Level 1000 Hinged Lip Pit Mounted & Suspended Frame Dock Leveller Product Description The Delta Level 1000 is one of our ranges of hinged lip dock levellers. Dock levellers are indispensable for
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationSECTION METAL EQUIPMENT LOCKERS
SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationArchitect and Engineer Specifications
Architect and Engineer Specifications Control Room Consoles 2008 Winsted Corporation Model: E-SOC CONTROL STATIONS 10901 Hampshire Ave. So., Minneapolis, Minnesota 55438-2385 U.S.A. Telephone: (800) 447-2257
More informationFREE-STANDING ALTILISSE
FREE-STANDING ALTILISSE PRODUCT ADVANTAGES Made of aluminium Effective protection of te waterproofing membrane wit te ergonomic, rounded sape of te counterweigt and te front bumper. Te plastic covering
More informationSECTION HEALTHCARE CASEWORK (SYNTHESIS CASEWORK COLLECTION BY MIDMARK)
Midmark is more than just a manufacturer of healthcare products. We are a provider of innovation solutions that work for you. We have an experienced staff that coordinates projects for custom casework
More informationUnitised Curtain Wall Beaded
Unitised Curtain Wall Beaded Glazed Frame Unitised Curtain Wall Reference Brand: Sapa Building System Elegance 72 GF GENERAL DESCRIPTION Unitised curtain wall system using glazing beads for glass retention.
More information19 EURObox Cabinets / W:600mm
19 EURObox Cabinets / W:mm W=mm EURObox Free Standing Cabinets EURObox Free Standing cabinets are designed to perform for the best cost conduction to customers, with the strong and sturdy design, customer
More informationSpecification Weld requirements for fillet joint by fusion welding process. - Weld requirements
Class: Test Instruction and conditions of delivery Specification 2017-09 Weld requirements for fillet joint by fusion welding process Class No.:61 JED 879 Previous Edition Part name (for databases) - Weld
More information