KAM KNURLED ANGLE MOLDING ANGLE MOLDINGS " LAM-12 LOCKING ANGLE MOLDING DRYWALL CEILING GRID MBAC MAIN BEAM ADAPTER CLIP
|
|
- Millicent Andrews
- 5 years ago
- Views:
Transcription
1 HD80 8" TYP HD806 8" TYP KAM-020 KNURLED ANGLE KAM-2020 KNURLED ANGLE KNURLED ANGLE ANGLE S HD806 F08 8" 8" TYP 4 2 " S ATTACHMENT CLIP HD806 F6 8" TYP (XL84P) PROFILES 8" QSUTC QUIKSTIX UP TIGHT CLIP 6 2 " 300 LAM-2 LOCKING ANGLE " " DW30C APPLICATION " 40 RC2 RADIUS CLIP 8" 8 8" OC 4 " 30 DW4C APPLICATION ADAPTER CLIP SB2 STRONGBACK SUPPORT 6 2 " SCREW 60 " 200 DW60C APPLICATION ADAPTER CLIP ITEM #8 /8" -/ ITEM #88 /8" 3 " 00 ITEM 8 FOR USE WITH / GRID ITEM 88 FOR USE WITH GRID 3 APPLICATION Ø DDC DOUBLE CLIP These drawings show typical conditions in which the Armstrong product depicted is installed applicable for a particular installation the drawings for a particular installation or their fitness for a particular purpose installation to assure compliance with all Legal Requirements Armstrong is not licensed to provide professional architecture or engineering design services DWG NO SHEET 3/2/3 MSS S CEILING SYSTEMS * WORLD INDUSTRIES, INC * Lancaster, PA * Phone: 8- DESC:
2 TEE #2 TRANSITION CLIP 8" GYPSUM BOARD AXAC /8" PERIMETER 2' WIDE OR LESS 2' OR LESS TEE 2' OR MORE ANGLE LAY-IN CENTER CEILING POCKET ANGLE LAY-IN /8" GRID INVERTED AND SCREWED IN PLACE TO SUPPORT AXIOM BOTTOM TRIM PERIMETER TRIM ADAPTER CLIP PERIMETER 2' WIDE OR MORE AXIOM LIGHT COVE TO PERIMETER ACOUSTICAL TO SURROUND BRACE AS NEEDED ACOUSTICAL CEILING (3 PLACES) VECTOR ANGLE 8" 84 XT TO BE PLACED AT THE CLOSET ROUT HOLE FROM THE BOTTOM 84 XT TO BE PLACED AT THE CLOSET ROUT HOLE FROM THE BOTTOM (2",,,8",0", or 2") PERIMETER TRIM SCREWED TO SUSPENSION SYSTEM - SPAN, BUT NO GREATER THAN 2 OC - USE SCRAP TEE FOR INTERIM SUPPORT AS REQUIRED STEPPED PERIMETER TO ACOUSTICAL CEILING GRID POCKET TO VECTOR ACOUSTICAL CEILING TRIM GRID SUSYEM TEE CLIP DW4C SHOWN CLIP DW4C SHOWN MODIFIED S AXIOM ACOUSTICAL LIGHT COVE WITH CEILING AXIOM PERIMITER TRIM (2",,,8",0", or 2") /8" (INVERTED AND SCREWED IN PLACE TO SUPPORT LIGHT) AXIOM LIGHT COVE AND ACOUSTICAL CEILING USING GRID AXIOM BOTTOM TRIM END BEAD VECTOR FLUSH PERIMETER WITH VECTOR PANEL VECTOR MODIFIED ANGLED POCKET - VECTOR 2 GRID SUSYEM TEE XTAC /8" 8 " FLOATING CEILING WITH END BEAD TEGULAR TEE BRACE - SCRAP ANGLE XTAC G CRUSH BULB TO APPLY ONE PIECE AXIOM FOR FLUSH DRYWAL PERIMETER WITH TEGULAR PANEL 8" VECTOR POCKET TO ACOUSTICAL VECTOR AND TEGULAR PANEL - SOFFIT MUST BE GREATER THAN OR EQUALTO /8" (INVERTED AND SCREWED IN PLACE TO SUPPORT LIGHT) LIGHT COVE ONE PIECE AXIOM FOR These drawings show typical conditions in which the Armstrong product depicted is installed applicable for a particular installation the drawings for a particular installation or their fitness for a particular purpose installation to assure compliance with all Legal Requirements Armstrong is not licensed to provide professional architecture or engineering design services DWG NO SHEET 2 /0/3 S DESC: CEILING SYSTEMS * WORLD INDUSTRIES, INC * Lancaster, PA * Phone: 8-
3 METAL STUD AND TRACK REVERSE WALL ANGLE DLCC REVERSE WALL ANGLE 88 #2 /8" KAM -2 #2 METAL STUD AND TRACK PARTITION /8" SOFFIT - TO STUD AND TRACK TRANSITION TO TRANSITION BETWEEN ACOUSTICAL CEILING SOFFIT TO ACOUSTICAL CEILING #2 4'-0" & ATTACHMENT POINTS OF SOFFIT BRACE TO WALL AS REQUIRED BY LOCAL CODE (838) (XL84 or XL834) METALWORKS VECTOR 24x24 PANEL HD80 - SEE DETAIL "A" SEE DETAIL "B" SEE DETAIL "C" BACKBRACE AS REQUIRED SILHOUETTE SILHOUETTE DETAIL "C" S # XL34 /8" FASTENED w/ SCREWS TO THE TEE HD80 DW4C BRACE TO WALL SHADOW SQ TEGULAR #2, 4'-0" & ATTACHMENT POINTS OF SOFFIT SCREW (838) SOFFIT TO ACOUSTICAL CEILING USING SHADOW /8" FASTENED w/ SCREWS TO THE TEE DETAIL "A" - HD80 DW4C SCREW /8" ANGLED DETAIL "B" TYPICAL STEEL STUD PARTITION SLOPED TRANSITION TO ACOUSTICAL CEILING STEPPED SOFFIT SECTION BRACE AS REQUIRED #2, 4' OC OR AS REQUIRED BY CODE SEE DETAIL "B" SILHOUETTE MODIFIED SILHOUETTE /8" #2, 4' OC OR AS REQUIRED ANGLE SQ TEGULAR SEE DETAIL "A" DW4C GRID/ ACOUSTICAL PANEL #2, 4' OC OR AS REQUIRED BY CODE OPTION 2 /8" STEEL STUD /8" /8" SCREW DETAIL "B" PANEL BENT TO CORRECT ANGLE /8" OPTION #2, 4' OC OR AS REQUIRED BY CODE /8" GYPSUM BOARD GRID/ACOUSTICAL PANEL 3 3 SQ TEGULAR AXIOM TRANSITION SCREW ANGLE SILHOUETTE DETAIL "A" 80 HEMMED ANGLE BENT ON SITE TO CORRECT ANGLE GRID/ACOUSTICAL PANEL /8" "F" TRANSITION TO ACOUSTICAL CEILING ANGLED SOFFIT TO ACOUSTICAL CEILING AND ACOUSTICAL TRANSITION These drawings show typical conditions in which the Armstrong product depicted is installed applicable for a particular installation the drawings for a particular installation or their fitness for a particular purpose installation to assure compliance with all Legal Requirements Armstrong is not licensed to provide professional architecture or engineering design services DWG NO SHEET 3 /0/3 S DESC: CEILING SYSTEMS * WORLD INDUSTRIES, INC * Lancaster, PA * Phone: 8-
4 ATTACHMENT CLIP ADAPTER CLIP SCREW 2 ITEM ADAPTER CLIP 8 " KAM0 AND KAM2 KAM0 AND KAM2 2" KAM2020 AND KAM202 S ATTACHMENT CLIP 2" 4 ITEM RC2 RADIUS CLIP LAM-2 LOCKING ANGLE ITEM #8 /8" QUICKSTIX TEE 8" 0' 0' ITEM 8 FOR USE WITH / GRID ITEM GSC, GSC2 AND GSC6 ADJUSTABLE GRID SPACER CLIP / RC ITEM RC SPLICE CLIP 3/32" ATTACHMENT CLIP / 3/32" -3/8" -/8" -/8" ITEM #TT0 ITEM #TT0 -/8" 2-3/ SCREW S - ATTACHMENT CLIP -/ ITEM #88 /8" S AND S ITEM #RC - SPLICE ITEM TT0 (0' PARTITION TOP TRIM) ITEM 88 FOR USE WITH GRID These drawings show typical conditions in which the Armstrong product depicted is installed applicable for a particular installation the drawings for a particular installation or their fitness for a particular purpose installation to assure compliance with all Legal Requirements Armstrong is not licensed to provide professional architecture or engineering design services DWG NO SHEET /4/3 ACCESSORIES DESC: CEILING SYSTEMS * WORLD INDUSTRIES, INC * Lancaster, PA * Phone: 8-
5 WALL ANGLE FURRING TEES ANGLE CUP ITEM ITEM DWC CLIP ITEM QSUTC QUICKSTIX UPTIGHT CLIP ANGLE CUP INSTALLATION DETAIL ITEM DW8LT AND DW0LT TRANSITION CLIP WITH LOCKING TABS ITEM GC3W GRIP CLIP 3-WAY EXTERNAL HOLD DOWN CLIP ITEM GCWA GRIP CLIP WALL ATTACHMENT ITEM DDC DOUBLE CLIP ITEM XTAC ADAPTER CLIP ITEM DLCC DIRECT LOAD CEILING CLIP These drawings show typical conditions in which the Armstrong product depicted is installed applicable for a particular installation the drawings for a particular installation or their fitness for a particular purpose installation to assure compliance with all Legal Requirements Armstrong is not licensed to provide professional architecture or engineering design services DWG NO SHEET 2 /4/3 ACCESSORIES CEILING SYSTEMS * WORLD INDUSTRIES, INC * Lancaster, PA * Phone: 8- DESC:
Drywall Grid Suspension System with custom Axiom trim; NOAA, Tuscaloosa, AL Gould Evans Architects, New Orleans, LA.
Drywall Grid Suspension System with custom Axiom trim; NOAA, Tuscaloosa, AL Gould Evans Architects, New Orleans, LA drywall systems DRYWALL INSTALLATION SYSTEMS At-a-Glance helping to bring your one-of-a-kind
More informationShortspan. Framing Systems
Shortspan Framing Systems faster. easier. better. Armstrong Drywall Framing Systems install faster than traditional methods, which helps you complete jobs under cost and ahead of schedule. Our Drywall
More informationDIVISION: FINISHES SECTION: SUSPENSION SYSTEMS REPORT HOLDER: WORTHINGTON ARMSTRONG VENTURE (WAVE)
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2311 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 09 00
More informationSHORTSPAN FRAMING SYSTEMS
SHORTSPAN FRAMING SYSTEMS FASTER. EASIER. BETTER. Armstrong Drywall Framing Systems install faster than traditional methods, which helps you complete jobs under cost and ahead of schedule. Our Drywall
More informationSHORTSPAN. Features. Components
Armstrong DGS ShortSpan is a fast and easy solution for framing short spans and an economical alternative to TCR and Furring Channel constructions. Features ShortSpan enables framing without suspension
More informationCI/SfB (35) Xy [ Between us, ideas become reality. ] September 2005 FLAT. DrywallGridSystem. Technical Guide CURVED
CEILING SYSTEMS CI/SfB (35) Xy [ Between us, ideas become reality. ] September 2005 FLAT Technical Guide CURVED Index Page FEATURES and BENEFITS 1 COMPONENTS 2 Main Runners Cross Tees Perimeter Treatment
More informationCEILING SYSTEMS. DRYWALL GRID and FRAMING SYSTEM. Between us, ideas become reality
CEILING SYSTEMS Between us, ideas become reality DRYWALL GRID and FRAMING SYSTEM Pre-engineered systems from Armstrong are designed so you know what the details of finished installations will look like
More informationCEILING & WALL SYSTEMS
CEILING & WALL SYSTEMS Axiom Perimeter Trim Commercial Ceilings and Walls Solutions Guide Axiom Perimeter Trim AXIOM Trim The Axiom family of products provide functional and visual options in ceiling design.
More informationDrywall Framing System allows you to expand your design up to 17'.
Drywall Grid and Framing System Design Flexibility Drywall Grid Systems: Engineered to give you design control while providing a green installation by reducing steel up to 15%. Easily incorporate F-type
More informationAXIOM Indirect Field Light Coves
AXIOM Indirect Field Light Coves Assembly and Installation Instructions 1. GENERAL 1.1 Description The Axiom Indirect Field Light Cove system is a pre-engineered lighting solution designed to be used at
More informationAXIOM Direct Light Coves Assembly and Installation Instructions
AXIOM Direct s Assembly and Installation Instructions 1. GENERAL 1.1 Description The Axiom Direct system is a pre-engineered lighting solution designed to be used at a wall condition and integrate with
More informationSECTION AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 09 51 13 AXIOM INDIRECT FIELD LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and
More informationAXIOM Building Perimeter System Assembly and Installation Instructions
CEILING SYSTEMS AXIOM Building Perimeter System Assembly and Installation Instructions 1 GENERAL 1.1 Description Axiom Building Perimeter Systems (ABPS) is a pre-engineered perimeter solution to accomplish
More informationSECTION DRYWALL GRID LINEAR LIGHTING INTEGRATION
SECTION 09 22 26 DRYWALL GRID LINEAR LIGHTING INTEGRATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and Divisions-1
More informationBasic Suspension Systems
CEILING & WALL SYSTEMS Commercial Ceilings and Walls Solutions Guide Installing Armstrong Suspended Ceilings The ceiling system is made up of Armstrong panels which are supported by a suspension system
More informationstucco/ plaster GrId systems HanGInG and FramInG stucco/plaster CeIlInGs
Stucco/ Plaster Grid SystemS Hanging and Framing Stucco/Plaster Ceilings faster. easier. better. Armstrong Drywall Framing Systems install faster than traditional methods, which helps you complete jobs
More informationSTANDARD PRODUCTS - CUSTOM LOOK
AXIOM ClOUDS STANDARD PRODUCTS - CUSTOM LOOK AXIOM AXIOM can give your next space a unique and crisp feel. The AXIOM family offers dramatic visuals with a variety of flat vertical trims and design profiles.
More informationDRYWALL GRID SYSTEMS
DRYWALL GRID SYSTEMS HANGING & FRAMING FLAT CEILINGS WORK SMARTER Eliminate the labor-intensive cutting, tying, and spacing of track and channel framing. Our systems are engineered with rout locations
More informationAXIOM Indirect Light Coves
AXIOM Indirect Light Coves Assembly and Installation Instructions 1. GENERAL 1.1 Description The Axiom Indirect Light Cove system is a pre-engineered lighting solution designed to be used at a ceiling-to-wall
More informationPRELUDE. 24 MAX TM Suspension System Data Centre Ceiling Solutions. Assembly and Installation Instructions
Hardware That Needs to be Purchased Separately Screws are fine listed as shown: 4. x 3 mm or longer Self Drilling Screw Phillips Pan Head for attaching structural wall angle, lateral support bar 400 mm
More informationShortSpan Brochure1 6/14/05 4:39 PM Page 1 CEILING SYSTEMS
CEILING SYSTEMS Armstrong Short Drywall Grid System was introduced to the North American commercial building market early in 2005. Many of its properties are similar to other framing systems commonly
More informationIntegrated LIGHTING. Solutions
Integrated LIGHTING Solutions Lighting INTEGRATION Made Easy We understand the pain points of trying to integrate lighting into the ceiling plane, while being able to specify and maintain the crisp, clean
More informationAxiom Building Perimeter System
Ceiling Systems Between us, ideas become reality Axiom Building Perimeter System Assembly and Installation Instructions 1 GENERAL 1.1 Description The Axiom Building Perimeter System (AXBPS) is a preengineered
More informationCEILING SYSTEMS TECHNICAL GUIDE. DRYWALL Grid Systems. Hanging and Framing Flat Ceilings
CEILING SYSTEMS TECHNICAL GUIDE DRYWALL Grid Systems Hanging and Framing Flat Ceilings Work Smarter Eliminate the laborintensive cutting, tying, and spacing of track and channel framing. Our systems are
More informationBASICS Direct-Attach Ceiling Panels
INVISACOUSTICS Assembly and Installation Instructions BASICS Direct-Attach Ceiling Panels CEILING PANELS STANDARD ITEMS: Item No. 1212FP Item Name 23-3/4 x 47-3/4 x 3/ No Finish Included w/panels Sold
More informationAXIOM Building Perimeter System
AXIOM Building Perimeter System Assembly and Installation Instructions 1. GENERAL 1.1 Description The Axiom Building Perimeter System (AXBPS) is a pre-engineered perimeter solution to accomplish the transition
More informationSuspension System Data Center Ceiling Solutions
Hardware That Needs to be Purchased Separately Screws are fine listed as shown: Min 1-1/4" or longer #8 Truss head self-tapping screws for attaching structural wall angle, lateral support bar 16" or 4"
More informationAXIOM Perimeter Trim. Straight and curved options. More than 17 different profiles and visuals 7-1. For more information call ARMSTRONG
AXIOM Perimeter Trim The Axiom family of products provide functional and visual options in ceiling design. Extruded aluminum offers clean, crisp details Straight and curved options More than 17 different
More informationHOLD DOWN CLIPS #WGACHD LIFT & SHIFT CLIPS #WGACLNS [19.05] 3/4" 1/4" [6.35]TYP. REVEAL HOLD DOWN CLIP (BY OTHERS) FASTENERS LIFT & SHIFT
SAFETY CLIPS 5/6" H.D. T-GRID #8x5/8" OR PANHEAD SCREWS SAFETY CLIP 3" = '-0" [6.35] TYP. REVEAL LIFT & SHIFT SYSTEM SECTION [9.05] [6.35]TYP. REVEAL SAFETY CLIP 6" = '-0" HOLD DOWN CLIP LIFT & SHIFT CLIP
More informationTECTUM Lay-in and Tegular Ceiling Panels Assembly and Installation Instructions for 1-Inch Thick Standard Lay-in and Tegular Ceiling Panels
TECTUM Lay-in and Tegular Ceiling Panels Assembly and Installation Instructions for 1-Inch Thick Standard Lay-in and Tegular Ceiling Panels TECTUM LAY-IN & Tegular CEILING PANELS STANDARD ITEMS: Item No.
More informationIntegrated. Solutions
Integrated Lighting Solutions Lighting Integration Made Easy We understand the pain points of trying to integrate lighting into the ceiling plane, while being able to specify and maintain the crisp, clean
More informationBASICS Direct-Attach Ceiling Panels
INVISACOUSTICS Assembly and Installation Instructions BASICS Direct-Attach Ceiling Panels CEILING PANELS STANDARD ITEMS: Name 1212FP 23-3/4 x 47-3/4 x 3/ No Finish 1212BL 23-3/4 x 47-3/4 x 3/ Black 1212WH
More informationTECTUM Lay-in and Tegular Ceiling Panels Assembly and Installation Instructions for 1-Inch Thick Standard Lay-in and Tegular Ceiling Panels
TECTUM Lay-in and Tegular Ceiling Panels Assembly and Installation Instructions for 1-Inch Thick Standard Lay-in and Tegular Ceiling Panels TECTUM LAY-IN & TEGULAR CEILING PANELS STANDARD ITEMS: Item No.
More informationPrelude xl Max. Suspension System
Prelude xl Max Suspension System Technical Guide Data Center Ceiling Solutions technical guide The Prelude XL Max suspension system for data center applications is a pre-engineered ceiling suspension system
More informationNortrax Section David Manchester Road, Ottawa NON-STRUCTURAL METAL FRAMING 16 May 2014 Page 1
16 May 2014 Page 1 PART 1 GENERAL 1.1 DESCRIPTION This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationPEAKFORM SUSPENSION SYSTEMS
PEAKFORM SUSPENSION SYSTEMS THE PEAKFORM RANGE: WHERE INNOVATION MEETS PERFORMANCE PeakForm is a comprehensive range of suspended ceiling grid solutions designed to meet most commercial design requirements:
More informationWOODWORKS Vector Panels
WOODWORKS Vector Panels Assembly and Installation Instructions Item # Description Included with panels WoodWorks Vector Panels Required for Install Sold by the Pcs/Ctn 5401 24 x 24 x 3/4" panel Ctn 16
More informationOPTIMA and LYRA Concealed
OPTIMA and LYRA Concealed Installation and Maintenance Guide CEILING PANEL ITEMS: Optima Concealed 8537 24" x 48" x 7/8" 8535 24" x 72" x 7/8" 8536 24" x 96" x 7/8" 8534 30" x 30" x 7/8" 8538 48" x 48"
More informationSECTION NON-STRUCTURAL METAL FRAMING
SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More informationOptima Vector Ultima Vector
CEILING&WALL SYSTEMS Between us, ideas become reality Optima Ultima Installation Instructions ceiling panel items: OPTIMA: 3900, 3901, 3902, 3903, 3904, 3905, 3906, 3907, 3908, 3909 ULTIMA: 1920, 1921
More informationOPTIMA Concealed. Installation and Maintenance Guide
OPTIMA Concealed Installation and Maintenance Guide CEILING PANEL ITEMS: 8537 24" x 48" 8535 24" x 72" 8536 24" x 96" 8534 30" x 30" 8538 48" x 48" 8539 48" x 48" (with foil back) CEILING PANEL ACCESSORIES:
More informationSYNTHETIC STUCCO GRID SYSTEMS HANGING AND FRAMING EIFS/DIRECT APPLIED CEILINGS
SYNTHETIC STUCCO GRID SYSTEMS HANGING AND FRAMING EIFS/DIRECT APPLIED CEILINGS FASTER. EASIER. BETTER. Armstrong Drywall Framing Systems install faster than traditional methods, which helps you complete
More informationBasics Direct-Attach Ceiling Panels
InvisAcoustics Assembly and Installation Instructions Basics Direct-Attach Ceiling Panels ceiling panels Standard items: Name 1212FP 23-3/4 x 47-3/4 x 3/ No Finish 1212BL 23-3/4 x 47-3/4 x 3/ Black 1212WH
More informationBuilding Perimeter System. AXIOm
Building Perimeter System AXIOm AXIOm Building Perimeter System Complete wall-to-wall ceiling perimeter control Use this pre-engineered extruded aluminum system around the perimeter of your acoustical
More informationsynthetic stucco GrId systems HanGInG and FramInG eifs/direct applied CeIlInGs
SYNTHETIC Stucco Grid SystemS Hanging and Framing EIFS/Direct Applied Ceilings faster. easier. better. Armstrong Drywall Framing Systems install faster than traditional methods, which helps you complete
More informationFORMATIONS. Acoustical Clouds CEILING SYSTEMS
CEILING SYSTEMS Shown: 14' x 14', 8' x 10' and 6' x 10' Formations Clouds FORMATIONS Enhance acoustics without sacrificing design. Now, both form and function thrive with Formations! Made from standard
More informationPEAKFORM SUSPENSION SYSTEMS
PEAKFORM SUSPENSION SYSTEMS THE PEAKFORM RANGE: WHERE INNOVATION MEETS PERFORMANCE PeakForm is a comprehensive range of suspended ceiling grid solutions designed to meet most commercial design requirements:
More informationLEED. AXIOM Building Perimeter System. Lutron Compatible Shade Pockets. Declare SM Living Building Challenge Compliant.
Declare SM Living Building Challenge Compliant High Performance Sustainable Ceiling Systems 50% RecyCLEd Content Aluminum LEED energy management construction waste mgmt regional design for flexibility
More informationLEED. AXIOM Building Perimeter System. Lutron Compatible Shade Pockets. Declare SM Living Building Challenge Compliant.
Declare SM Living Building Challenge Compliant High Performance Sustainable Ceiling Systems 50% RecyCLEd Content Aluminum LEED energy management construction waste mgmt regional design for flexibility
More informationSECTION Axiom Roller Shade Integration
SECTION 09 51 13 Axiom Roller Shade Integration PART 1 GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY A. Section Includes: 1. Pre-engineered perimeter transition system B. Related sections: 1. Section 09 51
More informationCEILING SYSTEMS. Between us, ideas become reality. PeakForm SUSPENSION SYSTEMS
CEILING SYSTEMS Between us, ideas become reality PeakForm SUSPENSION SYSTEMS The PeakForm Range: WHERE INNOVATION MEETS PERFORMANCE PeakForm is a comprehensive range of suspended ceiling grid solutions
More informationA. Product Data: Submit manufacturer's descriptive literature, and recommendations and instructions for installation.
SECTION 09512 - ACOUSTICAL TILECEILINGS (ACT-01 and ACT-02) PART 1 - GENERAL 1.01 SUMMARY A. Section includes ceilings consisting of acoustical panels and exposed suspension systems. This ceiling system
More informationReferences in blue are general indicators to the specifier. If not used it can be deleted, but may be needed in the future.
General spec. notes: References in blue are general indicators to the specifier. If not used it can be deleted, but may be needed in the future. SECTION 095133 / 09 51 33 PANZ Metal Ceiling Panels and
More informationSECTION (09512) - ACOUSTICAL TILE CEILINGS
SECTION 09 51 23 (09512) - ACOUSTICAL TILE CEILINGS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Suspended Metal Grid Systems Complete With Wall Trim 2. Suspended Fiberglass Grid Systems Complete
More informationInstruction and Safety Manual Resilient Sound Isolation Clips (SIC Clips)
SOUND ISOLATION CLIPS Installation Manual Instruction and Safety Manual Resilient Sound Isolation Clips (SIC Clips) SOUND ISOLATION CLIP SPECIFICATIONS Width...1.00 inch Height...1.06 inch Length...3.86
More informationRISE UP. High-Quality Solutions for High-Rise Residential Building Development
RISE UP High-Quality Solutions for High-Rise Residential Building Development WOODWORKS LINEAR UNPRECEDENTED ATTENTION TO DETAIL High-rise residential design demands a wide range of ceiling performance
More informationMETALWORKS, OPTIMA. and SPECTRA Capz. Installation Instructions /15/08 Patent No For best installation results:
METALWORKS, OPTIMA Installation Instructions and SPECTRA Capz For best installation results: 3931 4/15/08 Patent No. 6.103.360 Optima and Spectra panels are installation directional (refer to arrow on
More informationRSIC-V. Acoustical Surfaces, Inc. RSIC-V Sound Isolation Clip RSIC V INSTALLATION GUIDE. We Identify and S.T.O.P. Your Noise Problem
A Master Distributor for PAC INTERNATIONAL, INC. RSIC V INSTALLATION GUIDE RSIC-V Page 1 Furring Channel: Minimum requirements: 25 gauge, hemmed edge detail required on all 25 gauge furring channel. Meets
More informationCEILING SYSTEMS. Between us, ideas become reality. WOODWORKS Grille Tegular
CEILING SYSTEMS Between us, ideas become reality WOODWORKS Tegular WOODWORKS Tegular Key Selection Attributes Panels feature solid wood blades that can be installed in a linear fashion or patterned for
More informationSECTION ACOUSTICAL TILE. *(Filed Sub-Bid Required) 1.00 TIME, MANNER AND REQUIREMENTS FOR SUBMITTING SUB-BIDS
SECTION 090003 *(Filed Sub-Bid Required) PART 1 GENERAL 1.00 TIME, MANNER AND REQUIREMENTS FOR SUBMITTING SUB-BIDS A. Sub-bids shall be submitted in accordance with provisions of the General Laws (Ter.
More informationOPTIMA, ULTIMA, and LYRA Vector
OPTIMA, ULTIMA, and LYRA Assembly and Installation Instructions CEILING PANEL ITEMS: OPTIMA: 3900, 3900PB, 3901, 3902, 3903, 3904, 3905, 3906, 3907, 3908, 3908PB, 3909 Non-directional ULTIMA: 1920, 1921
More informationMETALWORKS RH215 Faceted Custom Hook-on Panels
METALWORKS RH215 Faceted Custom Hook-on Panels Assembly and Installation Instructions 1. GENERAL 1.1 Product Description MetalWorks RH215 Faceted Custom Hook-on panel system is a downward accessible, custom
More informationSECTION NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationOptimA, Ultima, CALLa, and LYRA Vector
OptimA, Ultima, CALLa, and LYRA Vector Assembly and Installation Instructions ceiling panel items: OPTIMA: 3900, 3900PB, 3901, 3902, 3903, 3904, 3905, 3906, 3907, 3908, 3908PB, 3909 Non-directional ULTIMA:
More informationMETALWorkS. RH200 Custom Hook-on Panels. General Installation Instructions. Ceiling 1.0 GENERAL Site Conditions Product Description
Ceiling Systems Between us, ideas become reality METALWorkS General Installation Instructions RH200 Custom Hook-on Panels 1.0 GENERAL 1.1. Product Description RH200 system is a downward accessible, metal
More informationRSIC-1-INSTALALTION GUIDE RSIC-1 SOUND ISOLATION CLIP
RSIC-1 Drywall Furring Channel: Minimum Requirements: 25 gauge, hemmed edge detail required on all 25 gauge furring channel. Meets or exceeds SFIA requirements. Depth: 7/8 inch Width Bottom: 2-9/16 to
More informationMETAL SUSPENSION SYSTEMS FOR LAY-IN PANEL CEILINGS: 2001 CBC IR
California Department of General Services. Division of the State Architect. Interpretation of Regulations Document METAL SUSPENSION SYSTEMS FOR LAY-IN PANEL CEILINGS: 2001 CBC IR 25-2.01 References: 2001
More informationLather (Interior Systems Mechanic) Level 3
Level 3 Lather/Interior Systems Mechanic (ISM) Unit: B3 Blueprint Reading and Specifications 3 Duration: 35 hours 20 hours 15 hours This unit is designed to provide the apprentice with the knowledge and
More informationEndure 900 Suspended Ceiling Installation Guide
Endure 900 Suspended Ceiling Installation Guide World Commerce Center 2000 Ring Way Road, St. Augustine, FL 32092 Phone: 800-227-8566 or 904-584-1400 www.rulonco.com Receipt and Storage: a. All material
More informationDIVISION: FINISHES SECTION: SUSPENSION SYSTEMS SECTION: ACOUSTICAL CEILING SUSPENSION ASSEMBLIES REPORT HOLDER:
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-3336 Reissued 01/2015 This report is subject to renewal 01/2017. DIVISION: 09 00 00 FINISHES
More informationGeneral applications. Fast. Easy. Customer Focused.
C E I L I N G S U S P E N S I O N S Y S T E M S Fast. Easy. Customer Focused. General applications 200 Snap-Grid (Hook) /16) 250 Fire-Front Snap-Grid (Hook) /16) Seismic 1200 & 1200 (Stab) /16) 1250 Fire-Front
More informationQUIKSTIX WALL LINER Drywall Framing System (Patent Pending)
CEILING & WALL SYSTEMS TECHNICAL GUIDE DrywallSystem QUIKSTIX WALL LINER Drywall System (Patent Pending) FASTER: Eliminate measuring and marking with QuikStix EASIER: Keep both feet on the floor while
More informationDIVISION: FINISHES SECTION: SUSPENSION SYSTEMS SECTION: ACOUSTICAL CEILING SUSPENSION ASSEMBLIES REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3336 Reissued 01/2017 This report is subject to renewal 01/2019. DIVISION: 09 00
More informationWHAT YOU NEED TO KNOW
WHAT YOU NEED TO KNOW SEISMIC Tested Solution SEISMIC CEILING INSTALLATION WHAT CAUSES SEISMIC ACTIVITY? The earth s surface is made up of a series of (Tectonic) plates that move in relation to each other.
More informationMETALWORKS Blades Classics
METALWORKS Blades Classics Assembly and Installation Instructions Sold by the: Pcs/Ctn METALWORKS BLADES CLASSICS ITEMS: Item # Item Name Incl with Blades Classics 8155 22.5 x 4 x 1" with two factory installed
More informationOPTIMA Vector ULTIMA Vector
OPTIMA ULTIMA Assembly and Installation Instructions CEILING PANEL ITEMS: OPTIMA: 3900, 3900PB, 3901, 3902, 3903, 3904, 3905, 3906, 3907, 3908, 3908PB, 3909 ULTIMA: 1920, 1921 ULTIMA Create! : Z1920UC1
More informationStore No MAY 13 Addendum No. 1 SECTION ACOUSTICAL PANEL CEILINGS
SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION GYPSUM BOARD SYSTEM
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 09 29 00 GYPSUM BOARD SYSTEM A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification sections,
More informationLather/Interior Systems Mechanic (ISM) Level 3
Level 3 B3 Blueprint Reading and Specifications 3 Duration: 35 hours 20 hours 15 hours This unit is designed to provide the apprentice with the knowledge and skills of blueprint reading and specifications.
More informationSeismic Suspension System Solutions
Seismic Suspension System Solutions Technical Guide CertainTeed Ceilings Acoustic Ceilings & Suspension Systems PURPOSE OF SEISMIC INSTALLATION REQUIREMENTS FOR SUSPENDED CEILINGS Provide a suspension
More informationInstallation Guide and Safety Manual Resilient Sound Isolation Clips (SIC Clips)
Installation Guide and Safety Manual Resilient Sound Isolation Clips (SIC Clips) SOUND ISOLATION CLIP SPECIFICATIONS Width...1.00 inch Height...1.06 inch Length...3.86 inch Weight....025 lbs Max Spacing...48
More informationSeismic Installation FAQ
Seismic Installation FAQ CLOUDS: Q. What is a cloud? A. Armstrong defines a cloud as a ceiling that is not connected to a wall on any side. ASCE-7 Design Manual, Section 13 states that the design of architectural
More informationMORE INFORMATION BPLA
MORE INFORMATION For more information, or for an Armstrong representative, call 1 877 ARMSTRONG. For complete technical information, detail drawings, CAD design assistance, installation information, and
More informationSECTION GYPSUM BOARD SYSTEM
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 09 29 00 GYPSUM BOARD SYSTEM A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification sections,
More informationCeilings & Partition Solutions
Ceilings & Partition Solutions INTRODUCTION WHO WE ARE? GTI is a recognized manufacturer of quality building materials in GCC and specialized in Metal Processing Products & Ceiling Suspension Systems.
More informationARMSTRONG SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS. SECTION PERIMETER TRANSITION SYSTEM
Armstrong World Industries, Inc. Please understand that you are responsible for the accuracy of all project specifications, including any Armstrong Ceilings guide specifications that you use. ARMSTRONG
More informationCEILING SYSTEMS ORCAL AXAL VECTOR. Technical Data Sheet. Semi-concealed system on exposed 24mm grid. [ Between us, ideas become reality.
CEILING SYSTEMS [ Between us, ideas become reality. TM ] ORCAL AXAL VECTOR Semi-concealed system on exposed 24mm grid Technical Data Sheet This Technical Data sheet is offered as an aid to the specification
More informationOptima Vector Plank. Installation Instructions. Ceiling
Ceiling Systems Between us, ideas become reality Optima Vector Plank Installation Instructions 1. GENERAL 1.1. Product Description The Vector products referenced in these instructions are made from fiberglass.
More informationDRYWALL GRID SUSPENSION SYSTEM NEW ZEALAND. Available from 0800 POTTERS
DRYWALL GRID SUSPENSION SYSTEM NEW ZEALAND Available from 0800 POTTERS www.potters.co.nz www.usgboral.com DECEMBER 2015 Apartments Hotels Retail Malls Banks Lobbies Schools Medical Industrial Food Preparation
More informationSECTION GYPSUM BOARD
SECTION 09 2900 GYPSUM BOARD PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install gypsum board as described in Contract Documents, except behind ceramic tile. 2. Furnish
More informationAND ACCESSORIES FOR DRYWALL CONSTRUCTION
STEEL TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION Quality in your corner. THE STRENGTH WITHIN MONTREAL TORONTO CALGARY EDMONTON VANCOUVER STEEL TRIMS AND ACCESSORIES for Construction BAILEY HAS YOUR
More informationWHAT S SPRING/SUMMER 2012
What s SPRING/SUMMER 2012 METALWORKS Torsion Spring Monolithic Metal Monolithic visual with 100% downward accessibility Choose from five standard panel sizes that install on pre-slotted standard 15/16"
More informationOPTIMA Vector Plank Installation Instructions
CEILING SYSTEMS Between us, ideas become reality OPTIMA Vector Plank Installation Instructions 1. GENERAL 1.1. Product Description The Vector products referenced in these instructions are made from fiberglass.
More informationDonn Brand Suspension Systems. Accessory. Product Guide
Donn Brand Suspension Systems Accessory Product Guide Since 1957, DONN brand suspension systems have set the standard worldwide for the ceiling suspension industry. Donn suspension systems are readily
More informationBanyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL
SECTION 09511 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationNATIONAL GYPSUM COMPANY Wood Frame Walls And Ceilings Single- And Double-Layer Construction
Walls And Ceilings Single- And Double-Layer Construction 09 9 00/NGC Single-Layer Construction The single-layer construction system consists of a single layer of Gold Bond brand Gypsum Board applied to
More informationOCALA INTERNATIONAL AIRPORT MBI PN: GENERAL AVIATION TERMINAL JANUARY 16, 2018 ADDENDUM-ISSUE
SECTION 09511 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSTEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN
STEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN STEEL STUD AND TRACK FOR DRYWALL PARTITIONS TAKE ADVANTAGE OF THE SAVINGS IN TIME
More informationAxiom. Building Perimeter System. Lutron Compatible Shade Pockets
Axiom Building Perimeter System Lutron Compatible Shade Pockets Integrated shade Pockets Now, there s a new integrated pocket and shading solution for building perimeter systems, thanks to a collaboration
More information