Product Change Notice
|
|
|
- Brent Bates
- 5 years ago
- Views:
Transcription
1 Product Change Notice PCN: V B Change Type: Issue Date: 03 Dec 2010 Please be advised that Avago Technologies is making the following product change on the effective date noted for the products listed below: Assembly Related Change: Change manufacturing site within the same country. Parts Affected: The affected part number list is attached in addendum. Description and Extent of Change: The new assembly location will have similar electrical, functionality and performance as the current facility. No change in design for all affected products. Parts from new manufacturing site will start from 2011 datecode marked on the device. Reasons for Change: Discontinuance of current assembly manufacturing site Effect of Change on Fit, Form, Function, Quality, or Reliability: There is no change to the fit, form, and function. The product has been qualified through Avago Technologies stringent qualification procedures. Reliability assessment showed no functional defects observed in the test run.
2 Effective Date of Change: Effective from 04 March 2011, shipments will be from the new manufacturing sites. During this period, Avago will continue to ship finish good from current manufacturing site. There may be mix shipments between current site and new site. Qualification Data: The reliability qualification data is as shown in Table A. Table A: Reliability Test Result: HDSP-U103, HDSP-U413, HDSP-K111, HDSP-N150, HDSP-8603 Environmental/Life Test Reference Stress Profile Unites Tested Units Failed Temperature Cycling Avago Std -55/100 o C 15/5min Dwell/Transfer, 100cyc 366 x 5 0 High Temperature Operating Life JESD22-A o C, Max Derated Current, 336hrs 66 x 5 0 Solder Heat Resistance JESD22-B o C for 10s, 2x 30 x 5 0 HDSP-4850, HDSP-2500, HDSP-2350 Environmental/Life Test Reference Stress Profile Unites Tested Units Failed Temperature Cycling Avago Std -40/85 o C 15/5min Dwell/Transfer, 100cyc 366 x 5 0 High Temperature Operating Life JESD22-A o C, Max Derated Current, 336hrs 66 x 5 0 Solder Heat Resistance JESD22-B o C for 10s, 2x 30 x 5 0 Summary: All the qualification vehicles submitted to reliability tests passed Avago's stringent reliability tests requirements. There were no functional defects observed in the tests run above. These changes have been reviewed and approved by Avago Technologies engineers and managers per Avago Technologies procedure: Change Control and Customer Notification, A Please contact your Avago Technologies field sales engineer or Contact Center ( ) for any questions or support requirements. Please return any response as soon as possible, but not to exceed 30 days.
3 Addendum Affected Part Number List HDSP 4830 HDSP 315G HDSP 7511 HDSP F511 IJC00 HDSP 4830 GH000 HDSP 315H HDSP 7511 CD000 HDSP F513 HDSP 4830 HH000 HDSP 315L HDSP 7513 HDSP F513 IJ000 HDSP 4832 HDSP 315Y HDSP 7513 CD000 HDSP G101 HDSP 4836 HDSP 316E HDSP 7517 HDSP G103 HDSP 4840 HDSP 316G HDSP 7801 HDSP G111 HDSP 4840 FG000 HDSP 316H HDSP 7801 JK000 HDSP G113 HDSP 4840 FGB00 HDSP 316L HDSP 7801 KK000 HDSP G201 HDSP 4850 HDSP 316Y HDSP 7802 HDSP G201 EF000 HDSP 4850 HI000 HDSP 316Y KMP00 HDSP 7802 JK000 HDSP G203 HDSP 4850 HIC00 HDSP 3351 HDSP 7803 HDSP G211 HLCP A100 HDSP 3353 HDSP 7803 JK000 HDSP G213 HLCP A100 BC000 HDSP 3356 HDSP 7803 JKC00 HDSP G501 HLCP B100 HDSP 3600 HDSP 7804 HDSP G503 HLCP B100 BC000 HDSP 3601 HDSP 7807 HDSP G511 HLCP C100 HDSP 3603 HDSP 7808 HDSP G513 HLCP D100 HDSP 3900 HDSP 8601 HDSP H101 HLCP E100 HDSP 3901 HDSP 8601 EF000 HDSP H101 CD000 HLCP E100 BC000 HDSP 3901 EF000 HDSP 8603 HDSP H101 DE000 HLCP F100 HDSP 3903 HDSP 8603 EF000 HDSP H103 HLCP G100 HDSP 3903 EF000 HDSP A101 HDSP H103 DE000 HLCP H100 HDSP 3905 HDSP A101 FG000 HDSP H107 HLCP H100 BC000 HDSP 4201 HDSP A103 HDSP H108 HLCP J100 HDSP 4203 HDSP A103 FG000 HDSP H111 HLMP 2300 HDSP 4600 HDSP A107 HDSP H111 DE000 HLMP 2300 EF000 HDSP 4601 HDSP A107 FG000 HDSP H113 HLMP 2350 HDSP 4603 HDSP A108 HDSP H151 HLMP 2350 EF000 HDSP 4603 IJ000 HDSP A111 HDSP H153 HLMP 2366 HDSP 4606 HDSP A113 HDSP H157 HLMP 2400 HDSP 4606 IJ000 HDSP A125 HDSP H158 HLMP 2400 EF000 HDSP 515E HDSP A151 HDSP H211 HLMP 2450 HDSP 515G HDSP A153 HDSP H211 GH000 HLMP 2450 EF000 HDSP 515H HDSP A153 NO000 HDSP H213 HLMP 2500 HDSP 515H GH000 HDSP A211 HDSP H213 GH000 HLMP 2500 FG000 HDSP 515L HDSP A213 HDSP H413 HLMP 2516 HDSP 515L FG000 HDSP A213 CD000 HDSP H413 EF000 HLMP 2550 HDSP 515Y HDSP A401 HDSP H413 FG000 HLMP 2550 FG000 HDSP 516E HDSP A403 HDSP H511 HLMP 2598 HDSP 516G HDSP A413 HDSP H511 GH000 HLMP 2599 HDSP 516H HDSP A511 HDSP H513 HLMP 2600 HDSP 516L HDSP A511 JK000 HDSP H513 GH000
4 HLMP 2620 HDSP 516Y HDSP A513 HDSP K111 HLMP 2620 EF000 HDSP 516Y KMP00 HDSP A801 HDSP K113 HLMP 2635 HDSP 5501 HDSP A803 HDSP K121 HLMP 2655 HDSP 5501 GG000 HDSP A807 HDSP K123 HLMP 2655 EF000 HDSP 5501 GH000 HDSP A901 HDSP K211 HLMP 2670 HDSP 5503 HDSP A903 HDSP K211 GH000 HLMP 2685 HDSP 5503 GG000 HDSP A903 GHC00 HDSP K213 HLMP 2685 EF000 HDSP 5503 GH000 HDSP A907 HDSP K213 GH000 HLMP 2700 HDSP 5507 HDSP A908 HDSP K511 HLMP 2700 EF000 HDSP 5507 GG000 HDSP E100 HDSP K511 GH000 HLMP 2720 HDSP 5507 GH000 HDSP E101 HDSP K513 HLMP 2720 EF000 HDSP 5508 HDSP E101 EF000 HDSP K513 GH000 HLMP 2735 HDSP 5508 GH000 HDSP E103 HDSP N101 HLMP 2755 HDSP 5521 HDSP E150 HDSP N103 HLMP 2755 EF000 HDSP 5521 GG000 HDSP E151 HDSP N103 CD000 HLMP 2755 EFB00 HDSP 5521 GH000 HDSP E153 HDSP N105 HLMP 2770 HDSP 5523 HDSP E156 HDSP N150 HLMP 2785 HDSP 5523 GH000 HDSP F101 HDSP N151 HLMP 2785 EF000 HDSP 5551 HDSP F101 EF000 HDSP N153 HLMP 2785 EFB00 HDSP 5553 HDSP F103 HDSP U101 HLMP 2800 HDSP 5553 BC000 HDSP F103 EF000 HDSP U103 HLMP 2820 HDSP 5557 HDSP F107 HDSP U111 HLMP 2820 FG000 HDSP 5558 HDSP F108 HDSP U111 EG000 HLMP 2835 HDSP 5601 HDSP F111 HDSP U113 HLMP 2855 HDSP 5601 GH000 HDSP F111 EF000 HDSP U113 FG000 HLMP 2855 FG000 HDSP 5603 HDSP F113 HDSP U201 HLMP 2870 HDSP 5603 GH000 HDSP F151 HDSP U203 HLMP 2870 FG000 HDSP 5607 HDSP F151 MN000 HDSP U203 CD000 HLMP 2885 HDSP 5607 GH000 HDSP F153 HDSP U211 HLMP 2885 FG000 HDSP 5608 HDSP F153 NO000 HDSP U211 CD000 HLMP 2950 HDSP 5621 HDSP F157 HDSP U213 HLMP 2965 HDSP 5621 GH000 HDSP F158 HDSP U213 CD000 QDSP 4985 HDSP 5621 GH400 HDSP F161 HDSP U301 QLCP B247 HDSP 5623 HDSP F201 HDSP U303 QLCP C146 HDSP 5623 GH000 HDSP F201 DE000 HDSP U311 QLCP M096 HDSP 5701 HDSP F203 HDSP U313 QLMP 2976 HDSP 5701 FG000 HDSP F203 DE000 HDSP U HDSP 5703 HDSP F207 HDSP U CD000 HDSP 5703 FG000 HDSP F208 HDSP U HDSP 5721 HDSP F211 HDSP U DE000 HDSP 5721 FG000 HDSP F211 DE000 HDSP U413 LN HDSP 5723 HDSP F213 HDSP U CD000 HDSP 5811 HDSP F213 DE000 HDSP U501 J0C00
5 HDSP 5813 HDSP F301 HDSP U HDSP 7401 HDSP F301 DE000 HDSP U503 KL HDSP 7401 DE000 HDSP F303 HDSP U HDSP 7403 HDSP F303 DE000 HDSP U511 KL DD000 HDSP 7403 DE000 HDSP F303 DE016 HDSP U HDSP 7501 HDSP F401 HDSP U513 KL DD000 HDSP 7501 CD000 HDSP F403 QDSC A DE000 HDSP 7502 HDSP F413 QDSP HDSP 7502 CD000 HDSP F501 QDSP DE000 HDSP 7503 HDSP F501 JK000 QDSP A HDSP 7503 CD000 HDSP F503 QDSP F HDSP 7503 DD000 HDSP F503 JK000 QDSP K HDSP 7504 HDSP F503 JK016 QDSP S HDSP 7507 HDSP F511 QDSP S062 HDSP 315E HDSP 7508 HDSP F511 IJ000 QDSP U HDSP 3906 HDSP 8606 QDSP U DD000 HDSP 4206 HDSP N156 QDSP U239
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: A0902-04R1 DATE: September 24, 2009 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: 14 mm x 14 mm x 1.4 mm TQFP-100 & 10 mm x 10 mm x 1.4 mm TQFP-64 Product Mark Back Mark (RoHS) Date
PRODUCT/PROCESS CHANGE NOTICE (PCN)
Date Effective: Contact: Bimla Paul Date Code Other Title: Product Quality Assurance Attachment: Yes No Phone #: (408) 574-6419 E-mail: Bimla.Paul@idt.com Samples: DESCRIPTION AND PURPOSE OF CHANGE: Die
ADDITIONAL ASSEMBLY SOURCE (ASE) FOR THE MAX V DEVICE FAMILY
Revision: 1.0.0 PROCESS CHANGE NOTIFICATION PCN1201 ADDITIONAL ASSEMBLY SOURCE (ASE) FOR THE MAX V DEVICE FAMILY Change Description Altera will introduce Advanced Semiconductor Engineering (ASE) as an
PROCESS CHANGE NOTIFICATION PCN1714
Revision 1.1.0 PCN Issue Date: 09/29/2017 PROCESS CHANGE NOTIFICATION PCN1714 Substrate Change for Selected Ball Grid Array Wire Bond Package Types This is not a new PCN issuance. PCN1714 Rev 1.1.0 includes
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly and Test Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS42L52-CNZ(R) and CS43L22-CNZ(R) components Process/Product
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS8421-CNZ(R) component Process/Product Change Notification (Reference
PROCESS CHANGE NOTIFICATION PCN1801
Revision 1.0.0 PCN Issue Date: 01/26/2018 PROCESS CHANGE NOTIFICATION PCN1801 Capillary for Thermal Composite Flip Chip Ball Grid Array (BGA) Packages on Selected Arria II GX and Arria V Devices Change
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: A-0610-01 DATE: October 9, 2006 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: Plastic Packages currently assembled in IDT Product Mark Penang, Malaysia Back Mark Date Code Lot # will
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly and Test Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS42L52-CNZ(R) and CS43L22-CNZ(R) components Process/Product
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS8422-CNZ(R) component Process/Product Change Notification (Reference
If you have any questions concerning this change, please contact:
February 17, 2014 PPCN #130027 PROCESS/ PRODUCT CHANGE NOTIFICATION This is to inform you that Micrel Inc has qualified Exposed Pad (E-Pad) SOIC packages at STARS Microelectronics, Thailand as an alternative
ALTERNATIVE ASSEMBLY SITE FOR THE EPCS SERIAL CONFIGURATION DEVICE FAMILY
Revision: 1.2.0 PROCESS CHANGE NOTIFICATION PCN1003 ALTERNATIVE ASSEMBLY SITE FOR THE EPCS SERIAL CONFIGURATION DEVICE FAMILY Change Description This is an update to PCN1003, please see revision history
PROCESS CHANGE NOTIFICATION PCN1807
Revision 1.1.0 PCN Issue Date: 05/04/2018 Rev 1.1.0 Date: 08/17/2018 PROCESS CHANGE NOTIFICATION PCN1807 Alternate Assembly Sites for Selected Enpirion Power SoC Devices in QFN Modules with Metal Lids
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: I0303-03 DATE: 3/12/2003 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: IDT 79RC32V332-XXXDH/DHI, IDT 79RC32V333-XXXDH/DHI Product Mark Back Mark Y step only Date Code Date Effective:
PROCESS CHANGE NOTIFICATION (Advance Notification) PCN1512
Revision: 1.0.0 PROCESS CHANGE NOTIFICATION (Advance Notification) PCN1512 Solder Paste (Inductor Attach) Change for Power Products in QFN Package Change Description: Altera announces an upcoming change
If you have any questions concerning this change, please contact: NAME: Hank Chou PHONE:
January 20, 2014 Preliminary December 8, 2014 Final PPCN #140001 PROCESS/ PRODUCT CHANGE NOTIFICATION This is to inform you that Amkor, a Micrel assembly subcontractor, is transferring TQFP/LQFP production
DESIGN/PROCESS CHANGE NOTIFICATION
PCN# : P276A Issue Date : Aug. 27, 2012 DESIGN/PROCESS CHANGE NOTIFICATION This is to inform you that a change is being made to the products listed below. Unless otherwise indicated in the details of this
DESIGN/PROCESS CHANGE NOTIFICATION
PCN# : P69EAAB Issue Date : Oct. 05, 2016 DESIGN/PROCESS CHANGE NOTIFICATION This is to inform you that a change is being made to the products listed below. Unless otherwise indicated in the details of
ENCAPSULANT MATERIAL CHANGE FOR BGA Pb-FREE PACKAGES
Revision: 1.1.0 PROCESS CHANGE NOTIFICATION PCN0708 UPDATE ENCAPSULANT MATERIAL CHANGE FOR BGA Pb-FREE PACKAGES Change Description This is an update to PCN0708, published July 2007. Altera is implementing
PROCESS CHANGE NOTIFICATION PCN1714
Revision 1.0.0 PCN Issue Date: 08/25/2017 PROCESS CHANGE NOTIFICATION PCN1714 Substrate Change for Selected Ball Grid Array Wire Bond Package Types Change Description: Intel Programmable Solutions Group
Additional Assembly Source and Power Quad Flat Pack (RQFP) 208 and 240 Package Conversion
Revision: 1.0.0 PROCESS CHANGE NOTIFICATION PCN1002 Additional Assembly Source and Power Quad Flat Pack (RQFP) 208 and 240 Package Conversion Change Description Altera is introducing Amkor, Philippines
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: A0602-01 DATE: 4-Aug-2006 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: All Hermetic Packages Product Mark (See attached affected part # list) Back Mark Date Code Date Effective: Contact:
CYPRESS SEMICONDUCTOR ADVANCED PRODUCT CHANGE NOTIFICATION
CYPRESS SEMICONDUCTOR ADVANCED PRODUCT CHANGE NOTIFICATION PCN: 020040 DATE: December 16, 2002 Subject: 32 SOJ Mold Compound Changed to EME6600HR & EME9600HR at OMEDATA To: Description of change: The mold
PRODUCT/PROCESS CHANGE NOTICE (PCN)
3545 North First Street San Jose, CA 95134 USA PRODUCT/PROCESS CHANGE NOTICE (PCN) PCN Number: 06-07 Date Issued: December 13, 2006 Product(s) Affected: Products using TQFN/TDFN type packages Manufacturing
PCN Title: Qualification of Additional Bill of Materials (BOM), Fab Source, AT Site and Top Marking Change on Select Product
DATE: 19 th Sept, 2018 PCN #: 2366 PCN Title: Qualification of Additional Bill of Materials (BOM), Fab Source, AT Site and Top Marking Change on Select Product Dear Customer: This is an announcement of
Dimensions: [mm] Electrical Properties: Schematic: General Information: WE-UKW EMI Suppression 6-Hole Ferrite Bead
![Dimensions: [mm] Electrical Properties: Schematic: General Information: WE-UKW EMI Suppression 6-Hole Ferrite Bead](/thumbs/91/104869532.jpg "Dimensions: [mm] Electrical Properties: Schematic: General Information: WE-UKW EMI Suppression 6-Hole Ferrite Bead")
Dimensions: [mm] 40,0 ±3,0 40,0 ±3,0 10,0 ±0,5 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 320 Ω ±25% Impedance @ 100 MHz 100 MHz Z 512 Ω ±25% Rated Current
Process Change Notice #
User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, how-to and design documents,
Environmentally Preferred Products
Environmentally Preferred Products Lead (Pb)-Free, RoHS Compliant Solution May 2006 Customer Communication Let s get clear about RoHS RoHS (EU Directive 2002/95/EC) The official Directive name is Restriction
Process Change Notice #
User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, how-to and design documents,
1/9. Through Hole Lamp. Through Hole Lamp LTL17KGH5D LTL17KGH5D. Rev Description By Date
Rev Description By Date Above data for PD and Customer tracking only - NPPR Receive and Upload on OPNC Lance 07/13/2016 1/9 Part No. : 1. Description Through hole LEDs are offered in a variety of packages
Through Hole Lamp Product Data Sheet LTL1BETBEFJALCP1 Spec No.: DS Effective Date: 06/30/2015 LITE-ON DCC RELEASE
Product Data Sheet Spec No.: DS20-2014-0214 Effective Date: 06/30/2015 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: A-0403-03 DATE: 4/7/2004 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: BGA package family Product Mark Lot Number will have "H" prefix (see attachment for affected part #s). Back Mark
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/90/101407246.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 1,2 ref. Recommended Land Pattern: [mm] 8,6 2,1 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz Z 25 MHz 28 Ω ±25% Impedance @ 100 MHz Z 100 MHz 42
Product Change Notification - JAON-14PIGR452 (Printer Friendly)
Product Change Notification - JAON-14PIGR452-22 Dec 2016 - CCB 2802 Initial Noti... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=jaon-14pigr452 Page 1 of 3 12/23/2016 English Search...
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20130708002 Qualification of TI Clark as an Additional Assembly, Bump, and Test site for Select Devices on WCSP and QFN Package Change Notification
Cypress Semiconductor Package Qualification Report
ackage Qualification Report QT# 080906 VERSION 1.0 April 2008 28-Lead SSO (209 mils) (with Downbond) b-free, MSL3, 260 C Reflow Amkor-Anam hilippines (HIL-M) CYRESS TECHNICAL CONTACT FOR QUALIFICATION
WE-MPSB EMI Multilayer Power Suppression Bead
A Dimensions: [mm] B Land Pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 56 Ω ±25% Maximum Impedance 1000 MHz Z 90 Ω typ. Rated Current
WE-MPSB EMI Multilayer Power Suppression Bead
A Dimensions: [mm] B Land Pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 100 Ω ±25% Maximum Impedance 1200 MHz Z 160 Ω typ. Rated Current
Product Change Notification - GBNG-28HRUQ041
Product Change Notification - GBNG-28HRUQ041-12 Apr 2017 - CCB 2840 Initial No... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=gbng-28hruq0... Page 1 of 2 4/13/2017 Product Change
1/9. Through Hole Lamp. Through Hole Lamp LTL17KCBH5D LTL17KCBH5D. Rev Description By Date
Through Hole Lamp Rev Description By Date Above data for PD and Customer tracking only - NPPR Receive and Upload on OPNC ORMJITM 10/13/2009 A Update paper correction in P.2 from 50 C to 30 C in max. rating.
Package Qualification Report
Package Qualification Report Reliability By Design Qualification Description: The information contained herein represents proof of Reliability and Performance of the Package Series listed below in accordance
Assembly Site: JCET, China Package Types: SOT-23 3L, SOD-323, SC-79 Report No: QUAL08-WB
e Package / Assembly Site Qualification Interim Report 9/25/08 Assembly Site: JCET, China Package Types: SOT-23 3L, SOD-323, SC-79 Report No: 302747-QUAL08-WB Qualification Team Package Engineer: Mike
Cypress Semiconductor Mold Compound Qualification Report
Cypress Semiconductor Mold Compound Qualification Report QTP# 010601 VERSION 2.0 (G3) October 2004 28-44 Lead SOJ/20-32 Lead SOIC/28 Lead SNC s Sumitomo EME 6600HR Mold Compound, MSL3 Assembly CYPRESS
WE-CBA SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Properties: Properties Test conditions Value Unit Tol. Impedance 100 MHz Z 1100 Ω ±25% Maximum Impedance 70 MHz Z 1400 Ω typ. Rated Current ΔT = 40K
WE-CBA SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Properties: Properties Test conditions Value Unit Tol. Impedance 100 MHz Z 600 Ω ±25% Maximum Impedance 190 MHz Z 660 Ω typ. Rated Current ΔT = 40K
Platform Flash PROM VOG48 Package Lead Finish Conversion to NiPdAu
Platform Flash PROM VOG48 Package Lead Finish Conversion to NiPdAu Qualification Report Xilinx is disclosing this Qualification Report (the Documentation ) to you solely for use in the development of designs
Package Qualification Report Reliability By Design
Package Qualification Report Reliability By Design Qualification Description: The information contained herein represents proof of Reliability and Performance of the Package Series listed below in accordance
DANGEROUS GOODS PANEL (DGP)
International Civil Aviation Organization 21/6/17 WORKING PAPER DANGEROUS GOODS PANEL (DGP) TWENTY-SIXTH MEETING Montréal, 16 to 27 October 2017 Agenda Item 2: Development of recommendations for amendments
Dimensions: [mm] Electrical Properties: Schematic: General Information: WE-UKW EMI Suppression 6-Hole Ferrite Bead
![Dimensions: [mm] Electrical Properties: Schematic: General Information: WE-UKW EMI Suppression 6-Hole Ferrite Bead](/thumbs/81/82619494.jpg "Dimensions: [mm] Electrical Properties: Schematic: General Information: WE-UKW EMI Suppression 6-Hole Ferrite Bead")
Dimensions: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz 670 Ω ±25% Impedance @ 100 MHz 100 MHz Z 976 Ω ±25% Rated Current ΔT = 40 K I R 3 A max. Curie
WE-UKW EMI Suppression 6-Hole Ferrite Bead
A Dimensions: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 702 Ω ±25% Impedance @ 100 MHz 100 MHz Z 773 Ω ±25% Rated current ΔT = 40K I R 3.0 A max.
WE-UKW EMI Suppression 6-Hole Ferrite Bead
A Dimensions: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 320 Ω ±25% Impedance @ 100 MHz 100 MHz Z 512 Ω ±25% Rated current ΔT = 40K I R 3.0 A max.
WE-UKW EMI Suppression 6-Hole Ferrite Bead
A Dimensions: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 670 Ω ±25% Impedance @ 100 MHz 100 MHz Z 976 Ω ±25% Rated current ΔT = 40K I R 3.0 A max.
PRODUCT/PROCESS CHANGE NOTIFICATION
PRODUCT/PROCESS CHANGE NOTIFICATION Notification Date 08/29/2006 MPA - ASD & IPAD Division Power Shottky Rectifiers in TO-247 package Additional assembly and test location in India DIS - ASD & IPAD 1/8
Product Change Notification - JAON-14OICS710 (Printer Friendly)
Product Change Notification - JAON-14OICS710-17 Oct 2016 - CCB 2697 Final Notice... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=jaon-14oics710 Page 1 of 3 10/18/2016 English Search...
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20121120000 Qualification of CLARK-AT as new assembly site for affected device(s) moving from SCSAT, corresponding package change from punched RSP
Sectoral patterns of technical change: Towards a taxonomy and a theory
Sectoral patterns of technical change: Towards a taxonomy and a theory 기술경영협동과정 박사 4학기 유광용/ 김동희 Contents Keith PAVITT, Research Policy 13 (1984) 343-373 Chapter 1 Summary Chapter 2 Critiques Chapter 3
WE-UKW EMI Suppression 6-Hole Ferrite Bead
A Dimensions: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 920 Ω ±25% Impedance @ 100 MHz 100 MHz Z 961 Ω ±25% Rated current ΔT = 40K I R 3.0 A max.
WE-UKW EMI Suppression 6-Hole Ferrite Bead
A Dimensions: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 720 Ω ±25% Impedance @ 100 MHz 100 MHz Z 1240 Ω ±25% Rated current ΔT = 40K I R 3.0 A
M Semiconductor Products Sector Networking and Computing Systems Group Networking and Communications System Division
M Semiconductor Products Sector Networking and Computing Systems Group Networking and Communications System Division PCN: MC68360 Rev L fab transfer to TSC Effective Date: 10-Aug-00 Motorola is pleased
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of CLARK-AT as new assembly site for affected device(s) moving from SCSAT, corresponding package change from punched RSP to sawn RHH and associated
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 1000 Ω ±25% Maximum impedance 120 MHz Z 1100 Ω typ.
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 470 Ω ±25% Maximum impedance 230 MHz Z 600 Ω typ. Rated
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 600 Ω ±25% Maximum impedance 250 MHz Z 900 Ω typ. Rated
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 1000 Ω ±25% Maximum impedance 200 MHz Z 1200 Ω typ.
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of CLARK-AT as new assembly site for affected device(s) moving from SCSAT, corresponding package change from punched RTK to sawn RGP and change
Product Change Notification - KSRA-24MSDO763
Product Change Notification - KSRA-24MSDO763-01 Jun 2017 - CCB 2967 Initial Not... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=ksra-24msdo76... Page 1 of 3 6/7/2017 Product Change
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of as Additional Assembly/Test Site for Select Devices Change Notification / Sample Request Date: 1/25/2016 To: Newark/Farnell PCN Dear Customer:
Practical guidelines for PWB Moisture Sensitivity, Packaging and Handling. Mumtaz Y. Bora Peregrine Semiconductor San Diego, CA, USA
Practical guidelines for PWB Moisture Sensitivity, Packaging and Handling Mumtaz Y. Bora Peregrine Semiconductor San Diego, CA, USA Agenda and Overview Industry Standards for Moisture Sensitivity Packages
DESIGN/PROCESS CHANGE NOTIFICATION
PCN# : P336A Issue Date : May. 31, 2013 DESIGN/PROCESS CHANGE NOTIFICATION This is to inform you that a change is being made to the products listed below. Unless otherwise indicated in the details of this
WE-CBF HF SMD EMI Suppression Ferrite Bead (High Frequency)
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 600 ±25% Impedance @ 1 GHz 1 GHz Z 1100 min. Maximum
WE-CBF HF SMD EMI Suppression Ferrite Bead (High Frequency)
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 600 ±25% Impedance @ 1 GHz 1 GHz Z 450 min. Maximum
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 600 Ω ±25% Maximum impedance 150 MHz Z 700 Ω typ. Rated
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 30 Ω ±25% Maximum impedance 1000 MHz Z 40 Ω typ. Rated
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 1000 Ω ±25% Maximum impedance 90 MHz Z 1100 Ω typ.
WE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 50 Ω ±25% Maximum impedance 1000 MHz Z 82 Ω typ. Rated
PCN # JAON-30NGKY659 CCB # 2733 Atmel Products Packing Pre and Post Changes
PCN # JAON-30NGKY659 CCB # 2733 Atmel Products Packing Pre and Post Changes 2 Summary of Changes Items Changing Earliest Implementation Date Slide No/s. Part Aging November 1, 2016 3 Combination Rules
Cypress Semiconductor Package Qualification Report
ackage Qualification Report QT# 070201 VERSION 1.1 December 2007 Wafer Level CS Image Sensor (WLCS) (6.6 x 6.4mm) SnAgCu, MSL3, 245C Reflow XINTEC, Taiwan CYRESS TECHNICAL CONTACT FOR QUALIFICATION DATA:
WE-PD2A SMD Power Inductor
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 KHz/ 100 mv L 47 µh ±10% Rated Current T = 40 K I R 0.68 A max. Saturation
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of CLARK-AT as new assembly site for affected device(s) moving from SCSAT, corresponding package change from punched RTK to sawn RGP and change
WE-CBF HF SMD EMI Suppression Ferrite Bead (High Frequency)
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 1000 ±25% Impedance @ 1 GHz 1 GHz Z 1100 min. Maximum
RE: PCN # ESU SR70-02CTG Alternate Manufacturing Location Approval for Wafer Foundry & Backend Assembly, Test and Packing
8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 Dec 19 th, 2014 RE: PCN # ESU270-29 -- SR70-02CTG Alternate Manufacturing Location Approval for Wafer Foundry & Backend Assembly, Test and Packing
PRODUCT CHANGE NOTICE
PRODUCT CHANGE NOTICE Customer Info: Date Submitted: 06-04-8 Contact: Model No.: DS650/850-X Series Title: Product Description: Tel. No.: Customer P/N: Fax No.: Manufacturing Location(s) Affected: Philippines
WE-UKW EMI Suppression 6-Hole Ferrite Bead
A Dimensions: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 920 Ω ±25% Impedance @ 100 MHz 100 MHz Z 961 Ω ±25% Rated current ΔT = 40K I R 3.0 A max.
Cypress Semiconductor Mold Compound Qualification Report
Cypress Semiconductor Mold Compound Qualification Report QT# 002403 VERSION 1.0 January, 2001 Sumitomo EME 7320 Mold Compound Thin Quad Flat ack, (TQF), MSL3 ASE Taiwan CYRESS TECHNICAL CONTACT FOR QUALIFICATION
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Additional Pb Free Lead Finish and expansion of capacity (ASE-Shanghai) for Selected SOIC (D) products. Change Notification / Sample Request Date: 3/28/2013
Change Summary of MIL-PRF Revision K
Throughout the document Add class Y. Add class Y non-hermetic for space application QML products to the MIL-PRF-38535., Class Y task group and Space community. Throughout the document Update Non-government
Product Change Notification - KSRA-30CVPA719
Product Change Notification - KSRA-30CVPA719 Date: 04 Jul 2018 Product Category: Capacitive Touch Sensors; 8-bit PIC Microcontrollers Affected CPNs: Notification subject: CCB 3210 Final Notice: Qualification
Cypress Semiconductor Automotive Package Qualification Report
Automotive ackage Qualification Report QT# 090405 VERSION 1.0 May 2009 Automotive 56-Lead QFN NidAu, MSL3, 260C Reflow Amkor-Korea (L) CYRESS TECHNICAL CONTACT FOR QUALIFICATION DATA: Rene Rodgers Reliability
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20100929002 Additional Pb Free Lead Finish and expansion of capacity (ASE-Shanghai) for Selected SOIC (D) products. Final Change Notification / Sample
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: A0910-02 DATE: 15-Apr-2010 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: Cerdip 300 mil, Cerdip 600 mil Product Mark Cerpack, Sidebraze 300 mil Back Mark Assembly lot marked on the
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20130218003 Qualification of copper wire as alternate bonding material for selected products in TSSOP Package Final Change Notification Date: 3/4/2013
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/92/108620673.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 10,15 ±0,5 3,8 ±0,2 1 2 6,7 ±0,5 27,0 max. 5,28 6,35 3 11,56 5,08 27,51 Properties Test conditions Value Unit Tol. Inductance L 100
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/95/124810053.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 10,15 ±0,5 3,8 ±0,2 1 2 6,7 ±0,5 27,0 max. 5,28 6,35 3 11,56 5,08 27,51 Properties Test conditions Value Unit Tol. Inductance L 100
PCN Product/Process Change Notification
STMicroelectronics ADG - ASD & IPAD Division 1 BU Rectifiers and Thyristors/Triacs (1) ADG: Automotive & Discretes Group - ASD: Application Specific Device IPAD : Integrated Passive and Active Devices
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/92/108683517.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 2,5 ±0,2 Recommended Land Pattern: [mm] 2,7 Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 100 khz/ 1 V 2.2 µh ±20% Rated Current I R ΔT = 40 K 1.8 A max.
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/113578705.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Properties: 1 ref. 1 ref. 1,6 ref. 2,8 ±0,2 3,2 ±0,2 0,5 ref. 0,08 ref. 1,2 ref. O 0,6 ref. 1,5 ref. 1,5 ±0,2 0,3 ±0,2 1,5 4,5 2,3 1,25 Soldering Area Reserved