SCHOOL OF ENGINEERING
|
|
- Muriel Goodman
- 6 years ago
- Views:
Transcription
1 30 th - 31 th Mar ch 2017 Wels Campus University of Applied Sciences Upper Austria Stelzhamerstrasse 23, 4600 Wels Austria Europe
2 Abstract This event is a symposium on modern high-strength steels designed to provide postgraduate-level and research workers in materials science and materials engineering. It offers a basic knowledge on some selected aspects. Talks held by experts from academics and industry will review several topics, such as steel design, microstructures and mechanical properties, phase transformation, and modelling. The workshop is a platform, which allows to discuss the current knowlegde on modern generations of high-strength steels. The workshop will take place on March 30 th and 31 st at the University of Applied Sciences - Wels Campus. On March 31 st after the symposium, a get together event will take place, allowing further scientific exchanges and discussions. 2
3 2017, March 30 th Registration and Opening - 11:00 am-12:00 pm: Registration (A-Building, Room HS-008, FH- Wels) - 12:00 pm-12:15 pm: Welcome and Opening, Dr. Ir. Ludovic Samek, Prof. for Metal Sciences, University of Applied Sciences - Wels Campus 2017, March 30 th Session on Physical Modelling and Numerical Simulations - 12:15 pm-12:45 pm: Physical Modelling of Modern High-Strength Steels, Prof. Dr. Ir. Adam Grajcar, Silesian University of Technologies - 12:45 pm-1:15 pm: Modelling and Industrial Perspectives for Endless Strip Production of Steels, Dipl.-Ing. Axel Rimnac, Primetals Technologies GmbH - 1:15 pm-1:45 pm: Design of Metal Forming Processes by using Numerical Simulations Integrated with High Performance Computing Infrastructures, Prof. Ir. Danuta Szeliga, AGH University of Science and Technology - 1:45 pm-2:00 pm: Coffee break - 2:00 pm-2:30 pm: Inverse and Sensitivity Analysis in Identification of Material and Process Parameters, Prof. Ir. Danuta Szeliga, AGH University of Science and Technology - 2:30 pm-3:00 pm: Thermodynamic Simulations of Phase Diagramms using CALPHAD Method, Aurelie Jakob, TU Wien - 3:00 pm-3:30 pm: Computational Thermodynamics and Kinetics for Steel Development, Dr. Shan Jin, Thermo-Calc Software AB, Stockholm - 3:30 pm-3:45 pm: Coffee break 3
4 2017, March 30 th Session on Austenite Transformations and Physical Properties - 3:45 pm-4:15 pm: Dislocation based Modelling of Mechanical Properties of Multiphase High-Strength Steels, B.Sc. Karan Babbar, University of Applied Sciences - Wels Campus - 4:15 pm-4:45 pm: Intercritical Annealing of Third Generation AHSS- Steels with Medium Manganese Contents, B.Sc. Robert Hofer, University of Applied Sciences - Wels Campus - 4:45 pm-5:15 pm: Characterization of Density Reduced MnAl-TRIP Steel Concepts, B.Sc. Simone Kaar, University of Applied Sciences - Wels Campus - 5:15 pm-6:15 pm: Standing Buffet 4
5 2017, March 31 st Session on Advanced High-Strength Steels - 9:00 am-9:30 am: Third Generation Advanced High-Strength Sheet Steels, Prof. Dr. Ir. Emmanuel De Moor, Colorado School of Mines - 9:30 am-10:00 am: Modern High-Strength Steels for Automotive Applications, Dr. Ir. Daniel Krizan, voestalpine Stahl GmbH - 10:00 am-10:30 am: Thermomechanical Processing and Microsegregation of Advanced High-Strength Steels, Prof. Dr. Ir. Adam Grajcar, Silesian University of Technology - 10:30 am-11:00 am: Dynamic Behavior and Microstructure Analysis of High-Manganese Austenitic TWIP Steel, Prof. Dr. Ir. Magdalena Jablonska, Silesian University of Technology - 11:00 am-11:15 am: Coffee break 2017, March 31 st Session on Micro-Alloyed High-Strength Steels and Wires - 11:15 am-11:45 am: Micro-Alloyed Wire Steels, Prof. Dr. Ir. Emmanuel De Moor, Colorado School of Mines - 11:45 am-12:15 pm: Recent Developments on Wire Rod Steels, Dr. Ir. Robert Kienreich, voestalpine Wire Rod Austria GmbH - 12:15 pm-1:00 pm: Lunch Break, Standing Buffet 5
6 2017, March 31 st Session on Microstructures and Properties - 1:00 pm-1:30 pm: Overview of Microscopic Identification and Classification of Microstructures in AHSS, Dr. Johann Angeli, MSc., Lecturer FH Wels and voestalpine Stahl GmbH - 1:30 pm-2:00 pm: Microstructure Characterization and Carbide Precipitation in High-Strength Steels, Prof. Dr. Ir. Sophie Regnier, University of ICAM Toulouse - 2:00 pm-2:30 pm: Relationship Structure-Properties of Density Reduced MnAl-Steels, Dr. Ir. Ludovic Samek, Prof. for Metal Sciences, University of Applied Sciences - Wels Campus - 2:30 pm-2:45 pm: Coffee break - 2:45 pm-3:15 pm: New Developments on Welding Techniques, voestalpine Boehler Welding - 3:15 pm-3:45 pm: Simulation of Industrial Processes to Optimize Micro-Structure and Properties using DSI/Gleeble Simulators, Ph.D. Brian J. Allan, P.E., Dynamic Systems Inc. - 3:45 pm-5:45 pm: Get Together Evening, Buffet 6
7 More Information and Registration The registration to the conference is possible via the website of the conference until 2017, March 28 th. Registration on site on March 30 th is possible during the available registration time before the conference. Registration fee: 250 EUR excluding 10% VAT. The registration fee includes: conference participation, electronic proceedings (after the conference), and participation at the get together event, snacks and beverages during the conference. Fore more information, please contact either Mr. Dr. Ludovic Samek or the secretary of MKT-studies. Phone: , Phone: , Website and registration: 7
8 HAGENBERG LINZ STEYR WELS University of Applied Sciences Upper Austria School of Engineering Stelzhamerstraße Wels Austria Tel.: Fax: sekretariat.mkt@fh-ooe.at /fhooe.at B1 Roseggerstr. Railway station RAILWAY STATION CITY Bus station FH OÖ Wels Campus A25 car park Kaiser- Josef Platz Ringstr. Roseggerstr. Alderstr. Stelzhamerstr. Herrenstr. car park Traunpark Dr.-Schauer-Str. Hans- Sachs-Str. Magazinstr. B1 Linzer Strasse Passau EXIT Wels NORD B137 B138 B1 B1 Towards Sattledt Salzburg/Wien/Graz Towards Wels EXIT Wels OST A25 Towards Linz A1 A9
SCHOOL OF ENGINEERING
30 th - 31 th Mar ch 2017 Wels Campus University of Applied Sciences Upper Austria Stelzhamerstrasse 23, 4600 Wels Austria Europe www.fh-ooe.at/campus-wels Abstract This event is a symposium on modern
More informationDEVELOPMENT OF COLD ROLLED TBF-STEELS WITH A TENSILE STRENGTH OF 1180 MPA
DEVELOPMENT OF COLD ROLLED TBF-STEELS WITH A TENSILE STRENGTH OF 1180 MPA Florian Winkelhofer, Thomas Hebesberger, Daniel Krizan, Armineh Avakemian and Andreas Pichler, voestalpine Stahl GmbH INHALT 03
More informationPLATFORM FOR ENERGY ACHIEVE MORE THROUGH RESEARCH & DEVELOPMENT.
PLATFORM FOR ENERGY ACHIEVE MORE THROUGH RESEARCH & DEVELOPMENT www.fh-ooe.at/research Achieve more with Austria s strongest research University of Applied Sciences Successful businesses can tell you from
More informationCENTER OF EXCELLENCE LOGISTICS ACHIEVE MORE THROUGH RESEARCH & DEVELOPMENT. forschung.fh-ooe.at
CENTER OF EXCELLENCE LOGISTICS ACHIEVE MORE THROUGH RESEARCH & DEVELOPMENT forschung.fh-ooe.at Achieve More With Austria s Strongest Research University of Applied Sciences Successful businesses know from
More informationFH Upper Austria CENTER OF EXCELLENCE ENERGY ACHIEVE MORE THROUGH RESEARCH & DEVELOPMENT. forschung.fh-ooe.at
FH Upper Austria CENTER OF EXCELLENCE ENERGY ACHIEVE MORE THROUGH RESEARCH & DEVELOPMENT forschung.fh-ooe.at Achieve More With Austria s Strongest Research University of Applied Sciences Successful businesses
More informationDevelopment of TBF Steels with 980 MPa Tensile Strength for Automotive Applications: Microstructure and Mechanical Properties
Development of TBF Steels with 980 MPa Tensile Strength for Automotive Applications: Microstructure and Mechanical Properties A. Bachmaier, K. Hausmann, D. Krizan, A. Pichler voestalpine Stahl Linz GmbH,
More informationTHE INTERNATIONAL CONFERENCE
TRANSPORT AND TELECOMMUNICATION INSTITUTE THE INTERNATIONAL CONFERENCE EUROPEAN-ASIAN TRANSPORT CORRIDORS: TRENDS. STRATEGIES. PRACTICES. TSI, 23-24 APRIL 2015 This Conference is intended for academics,
More informationRELATIONSHIPS BETWEEN MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE SHEET STEELS
RELATIONSHIPS BETWEEN MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE SHEET STEELS Adam Grajcar SILESIAN UNIVERSITY OF TECHNOLOGY Faculty of Mechanical Engineering SILESIAN UNIVERSITY OF TECHNOLOGY
More informationOUTLINE. Dual phase and TRIP steels. Processing Microstructure Mechanical properties Damage mechanisms Strategies to improve strength and ductililty
OUTLINE Dual phase and TRIP steels Processing Microstructure Mechanical properties Damage mechanisms Strategies to improve strength and ductililty DUAL PHASE STEELS With relatively straightforward thermomechanical
More informationManganese Diffusion in Third Generation Advanced High Strength Steels
Proceedings of the International Conference on Mining, Material and Metallurgical Engineering Prague, Czech Republic, August 11-12, 2014 Keynote Lecture II Manganese Diffusion in Third Generation Advanced
More informationInnovation leads us!
Innovation leads us! A word with you. BUMA is your partner for plant engineering and construction. At our corporate seat in Linz, Austria, we have been focusing on innovative solutions for best customer
More informationAHS Steels for Automotive Parts
20-21June 2013 BITEC, Bangkok -Thailand AHS Steels for Automotive Parts Asst. Prof. Vitoon Uthaisangsuk, Dr.-Ing. Department of Mechanical Engineering, Faculty of Engineering King Mongkut s University
More information3rd ENplus auditors training
3rd ENplus auditors training Vienna, 11/12 October 2012 October 2012 Author: Peter Rechberger AEBIOM The sole responsibility for the content of this publication lies with the authors. It does not necessarily
More informationWorkshop High Performance Steels June 2009
Workshop High Performance Steels 11-12 June 2009 Programme Thursday 11 th June 12.00-13.00 Lunch 13.10-13.30 - welcome address and short presentation of Ltu 13.30-14.30 talk 1: G Olson gives a general
More informationMetallurgy Summer School
The Metallurgy Summer School on Simulation of Phase Transformations in Metal Processing organized by CoMET aims to provide a deep understanding of fundamentals of simulation techniques for metallic materials
More informationStructural studies with the use of XRD and Mössbauer spectroscopy of new high Manganese steels
Hyperfine Interact (2014) 226:781 789 DOI 10.1007/s10751-013-0940-4 Structural studies with the use of XRD and Mössbauer spectroscopy of new high Manganese steels Magdalena Barbara Jablonska Published
More informationCurriculum Vitae EDUCATION: Institute of Joining and Assembly Chemnitz University of Technology Reichenhainer Strasse 70 D Chemnitz, Germany
Curriculum Vitae Peter Mayr, Univ.-Prof. Dr. Vice Dean Mechanical Engineering Director Institute of Joining and Assembly Chair of Welding Engineering Chemnitz University of Technology Contact Details Office:
More informationInvitation. Student Camp Biorefineries and Biobased Industrial Products February 2019
Invitation Student Camp Biorefineries and Biobased Industrial Products 25. - 28. February 2019 Currently the industrial utilization of raw materials from agriculture, forestry, landscape conservation,
More informationA: ICG Advanced Course Strength of Glass Basics and Test Procedures June 19/20, 2006 B: DGG Hands-On Course Fractography of Glass Causes of Damage
A: ICG Advanced Course Strength of Glass Basics and Test Procedures June 19/20, 2006 B: DGG Hands-On Course Fractography of Glass Causes of Damage especially in Automotive Glazing June 20/21, 2006 Department
More informationDresden, Germany June 12 th to 14 th, 2018 PRELIMINARY PROGRAM. 8 th INTERNATIONAL CONFERENCE ON MAGNETISM AND METALLURGY
Dresden, Germany June 12 th to 14 th, 2018 PRELIMINARY PROGRAM 8 th INTERNATIONAL CONFERENCE ON MAGNETISM AND METALLURGY Monday June 11 th, and Tuesday, June 12 th Monday, June 11 th, 2018 4.00 6.00 pm
More informationMessphysik. Materials Testing. Zwick Roell Forum for High-Temperature Testing 31st May 2017, Fürstenfeld, Austria. Intelligent Testing
Messphysik Zwick Roell Forum for High-Temperature Testing 31st May 2017, Fürstenfeld, Austria Welcome to the Zwick Roell Forum for High-Temperature Testing We look forward to welcoming you at the premises
More informationforming processes Microstructure evolution in metal Jianguo Lin, Daniel Balint and Maciej Pietrzyk Edited by PUBLISHING WOODHEAD
Microstructure evolution in metal forming processes Edited by Jianguo Lin, Daniel Balint and Maciej Pietrzyk WP WOODHEAD PUBLISHING V:, ^ Oxford Cambridge Philadelphia New Delhi Contributor contact details
More informationUNIVERSITY OF THESSALY. Study of strain-induced transformation in low-alloy TRIP steels
UNIVERSITY OF THESSALY DEPARTMENT OF MECHANICAL ENGINEERING Study of strain-induced transformation in low-alloy TRIP steels ILIAS I. BELLAS M. Sc. Thesis 2015 2015 Bellas Ilias The approval of this Diploma
More informationDraft of Programme of the International Seminar (Russia, Moscow, October 2015)
Draft of Programme of the International Seminar (Russia, Moscow, 15-16 October 2015) The Best Practice of Sustainable Urban Transport Systems Planning: from Realization of Large-Scale Infrastructure Projects
More informationWorkshop 242 TABLET COATING June 2018
Workshop 242 TABLET COATING 18 20 June 2018 BACKGROUND On the one hand, increasing international competition is forcing companies to optimize their manufacturing and R&D processes. These trends increase
More informationCOURSES IN DESALINATION
European Desalination Society COURSES IN DESALINATION Genoa University Department of Chemistry and Industrial Chemistry Genoa, Italy June 24 25, 2013 Thermal Desalination June 26, 2013 Material Selection
More informationMETALLURGY SUMMER SCHOOL
METALLURGY SUMMER SCHOOL SIMULATION OF PHASE TRANSFORMATIONS IN METAL PROCESSING July 22 nd -25 th, 2018 Centro Residenziale Universitario Bertinoro (FC), Italy organized by CoMET - COORDINAMENTO DELLA
More informationDICTRA A tool for diffusion simulations
Page 1 of 6 DICTRA A tool for diffusion simulations 1 Introduction DICTRA is a general software package for simulation of DIffusion Controlled TRAnsformations in multicomponent alloys. The DICTRA software
More informationWelcome to voestalpine!
Welcome to voestalpine! Take the future into your own hands. www.voestalpine.com An overview of the voestalpine Group. We currently employ a workforce of around 48,500 people worldwide. We offer countless
More informationInfluence of physical-chemical processing and operating environments on. Systems of interest: Ceramics Multi-layer coatings Corrosion Reactor systems
Institute t for Materials Science DGM-Committee Thermodynamics, Kinetics and Phase Relations in Materials Hans Jürgen Seifert (TU Bergakademie Freiberg) Damian M. Cupid A platform for the interdisciplinary
More informationA master of science, engineering and entrepreneurship. Anders Engström
A master of science, engineering and entrepreneurship Anders Engström The Ågren Symposium 2017 Outline 1. Introduction 2. Science 3. Engineering 4. Entrepreneurship Introduction My interaction with John
More information33. ASK Metal Forming
33. ASK Metal Forming With the motto Shaping Ideas the 33rd ASK will address current topics and challenges in metal forming from the perspectives of material science, plant engineering and the application
More informationSUPPLY CHAIN MANAGEMENT SUMMER SCHOOL
SUPPLY CHAIN MANAGEMENT SUMMER SCHOOL In Cooperation with The Logistics Institute (TLI) - Asia Pacific / National University of Singapore 3rd - 15th July 2016 9:00 am - 6:00 pm School of Management FH
More informationCarina Baumgartner, Customer service. phs-ultraform. The press-hardening steel benchmark. voestalpine Steel Division
phs-ultraform The press-hardening steel benchmark Carina Baumgartner, Customer service voestalpine Steel Division www.voestalpine.com/steel 2 Hot-dip galvanized steel strip for press-hardened components
More informationWear-resistant steel grades. Hot-rolled steel strip and heavy plate. voestalpine Steel Division
Wear-resistant steel grades Hot-rolled steel strip and heavy plate Josef Elmer, Key Account Manager voestalpine Steel Division www.voestalpine.com/steel For the highest stress Highest resistance to wear
More information2018 den Titel mit Partnern
Das Solar ist Heating ein Beispiel Conference für 2018 den Titel mit Partnern as part of the Thema September Datum 11, 2018 Ort HSR Rapperswil Veranstalter Organisers Swiss Solar Award 2014 September 10
More informationSPONSORSHIP PROGRAMME
5th Workshop on Specialty Optical Fibers SPONSORSHIP PROGRAMME 11-13 October, 2017 Information Pack Conference Coordinators Easy Conferences 10, Michael Giorgalla, 1095 Nicosia, Cyprus P: +357 22 591 900
More informationRLS Energy Network. Regional Panel I: Current research in Biofuels. Research on Biofuels in Upper Austria
RLS Energy Network Regional Panel I: Current research in Biofuels Research on Biofuels in Upper Austria Sebastian Goers Scientific coordinator of Upper Austria Researcher at the Energy Institute, Department
More informationSTRUCTURE AND MECHANICAL PROPERTIES OF HIGH-Mn TWIP STEEL AFTER THEIR THERMO-MECHANICAL AND HEAT TREATMENTS
STRUCTURE AND MECHANICAL PROPERTIES OF HIGH-Mn TWIP STEEL AFTER THEIR THERMO-MECHANICAL AND HEAT TREATMENTS BOREK Wojciech 1, TAŃSKI Tomasz 1, JONŠTA Zdeněk 2, JONŠTA Petr 3, ČÍŽEK Lubomir 2 1 Division
More informationScienceDirect. Material-Technological Modelling of C45 Steel Die Forgings
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 100 (2015 ) 714 721 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2014 Material-Technological
More informationELECTRO-GALVANIZED STEEL STRIP
ELECTRO-GALVANIZED STEEL STRIP Range of supply April 2018 voestalpine Steel Division Steel grade Mild steels A 80 EN 10152:2009 R e A 80 r 90 n 90 E DC01 EN 10152:2009 Trans. 140-280 270-410 28 - - - DC03
More informationMULTI-SCALE & MICROMECHANICS
graduate course MULTI-SCALE & MICROMECHANICS November 6 th 8 th 2012 November 13 nd 15 th 2012 Mechanics of Materials Department of Mechanical Engineering Eindhoven University of Technology General This
More informationWorkshop Safeguarding and Enhancing Company Value by Leveraging Supply Risk Management (SRiM)
Home Agenda Register today! Travel & Accommodation Workshop Safeguarding and Enhancing Company Value by Leveraging Supply Risk Management (SRiM) Originating from corporate concerns for insurance cost and
More informationUniversity Programme Master of Engineering Hydropower
University Programme Master of Engineering Hydropower Graz University of Technology Master of Engineering (MEng) Hydropower, 5 semester, part-time Academic Hydropower Engineer, 4 semester, part-time University
More informationINVITATION SPEAKER AGENDA DETAILS
INVITATION SPEAKER AGENDA DETAILS INTRO talentsummit: Next Generation Talent Management What are future opportunities and challenges in talent management? How will concepts and trends such as new work,
More informationROLLING OF ADVANCED HIGH STRENGTH STEELS FOR AUTOMOTIVE INDUSTRY. Michał DZIEDZIC, Stanisław TURCZYN
ROLLING OF ADVANCED HIGH STRENGTH STEELS FOR AUTOMOTIVE INDUSTRY Michał DZIEDZIC, Stanisław TURCZYN Abstract Akademia Górniczo-Hutnicza, al. Mickiewicza 30, 30-059 Kraków, Poland dziedzic@metal.agh.edu.pl,
More informationTENTATIVE PROGRAMME FOR OPENING CEREMONY AND TECHNICAL SESSIONS. THEME: International Conference and Practical Training on Sustainable Energetics
ANSOLE DAYS 2018 & ANSOLECAM 2018 02-06 SEPTEMBER 2018. CENTRE POLYVALENT DE FORMATION (CPF) P.O. BOX. 27 BANDJOUN Venue: CONFERENCE ROOM TENTATIVE PROGRAMME FOR OPENING CEREMONY AND TECHNICAL SESSIONS
More informationTEPZZ 9 4 A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2015/40
(19) TEPZZ 9 4_ _A_T (11) EP 2 924 131 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication:.09.1 Bulletin 1/ (21) Application number: 14162191.2 (22) Date of filing: 28.03.14 (1) Int Cl.: C21D
More informationJOIN the Path to Excellence
JOIN the Path to Excellence voestalpine Böhler Welding www.voestalpine.com/welding Customized Training Courses & Workshops Dear Customers, Partners, and Colleagues, Excellence puts us a step ahead and
More informationTowards the limits of strength:
Towards the limits of strength: Design and understanding of ultra high strength steels D. Raabe, Y.J. Li, P. Choi, O. Dmitrieva, R. Kirchheim*, D. Ponge Düsseldorf, Germany WWW.MPIE.DE d.raabe@mpie.de
More informationXXI INTERNATIONAL WASTE RECYCLING CONFERENCE
SECOND CALL XXI INTERNATIONAL WASTE RECYCLING CONFERENCE The academic and research institutions of Visegrad 4 countries: Institute of Raw Material Preparation and Environmental Processing, University of
More informationHIGH PERFORMANCE MOLD STEELS FOR INJECTION OF REINFORCED PLASTICS
HIGH PERFORMANCE MOLD STEELS FOR INJECTION OF REINFORCED PLASTICS HIGH PERFORMANCE MOLD STEELS FOR INJECTION OF REINFORCED PLASTICS Modern industrial parts production in mainly automotive and electronic
More informationPublic Procurement Requirements for ESI Funds
Public Procurement Requirements for ESI Funds Interactive Workshop 28 29 September 2017 Prague, Czech Republik EXPERTS Chair in Law and Professor of European Business Law, University of Hull, UK and Managing
More informationisovac high-perm A
Electrical steel isovac high-perm 1400-100 A Data sheet February 2015 The specialist with the highest permeability isovac is the electrical steel made by voestalpine and stands for highest energy efficiency.
More informationTwo Days Customised Course on
Two Days Customised Course on With Special Reference to Materials Quality and Testing Requirements for Reliable Performance in Offshore, Oil & Gas and Chemical Industries EXAMAT Academy is pleased to announce
More informationMINING THE TECHNOSPHERE
International Workshop MINING THE TECHNOSPHERE Drivers and Barriers, Challenges and Opportunities October 1 2, 2015 Vienna University of Technology CONTENT Besides the exploitation of natural deposits
More informationEuropean Brokerage Event on Transport and Logistics
European Brokerage Event on Transport and Logistics New Munich Trade Fair Centre Conference Rooms B31/B32 (Hall B3) Munich, Germany 13 May 2009 Programme European Brokerage Event on Transport and Logistics
More informationCOURSES IN DESALINATION
European Desalination Society COURSES IN DESALINATION Genoa, Italy June 18 19, 2012 Thermal Desalination June 20, 2012 Material Selection in Desalination June 21 22, 2012 Water Management and Economics
More informationPE024: Troubleshooting Process Operations
PE024: Troubleshooting Process Operations PE024 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Troubleshooting is the process used to diagnose the fault safely and efficiently, decide on
More informationCOLD-ROLLED STEEL STRIP
COLD-ROLLED STEEL STRIP Technical terms of delivery 1 December 2017 voestalpine Steel Division www.voestalpine.com/steel These general terms apply to all cold-rolled steel strip supplied by companies in
More informationMU056: Heat Rate Audit & Analysis of Thermal Power Plants
MU056: Heat Rate Audit & Analysis of Thermal Power Plants MU056 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: The availability of Fuels required for Power Plants is reducing and their costs
More informationisovac high-perm A
Electrical steel isovac high-perm 1300-100 A Data sheet October 2015 The specialist with the highest permeability isovac is the electrical steel made by voestalpine and stands for highest energy efficiency.
More informationComputational Analysis of Precipitation during Continuous Casting of Microalloyed Steel
DOI: 10.1002/srin.201000021 steel research int. 81 (2010) No. 5 Computational Analysis of Precipitation during Continuous Casting of Microalloyed Steel M. Pudar 1) *, S. Zamberger 2), K. Spiradek-Hahn
More informationSponsor & Exhibit Opportunities MSC User Meeting D-A-CH May 13-14, Berlin, Germany
D-A-CH http://pages.mscsoftware.com/50years-homegermany.html A Unique Opportunity to Connect with MSC Software Users in Aerospace & Defense, Automotive, and a Multitude of Other Industries In February
More informationTHERMOMECHANICAL TREATMENT OF MULTIPHASE HIGH-STRENGTH STEELS SVOČ FST 2010
THERMOMECHANICAL TREATMENT OF MULTIPHASE HIGH-STRENGTH STEELS SVOČ FST 2010 Ing. Danuše Klauberová Západočeská univerzita v Plzni, Výzkumné centrum tvářecích technologií Univerzitní 22, 306 14 Plzeň Česká
More informationThe effect of aluminium on the microstructure and hardness of high austenitic manganese steel
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS The effect of aluminium on the microstructure and hardness of high austenitic manganese steel To cite this article: F Bahfie et
More informationCAPITAL MARKETS DAY 2017
CAPITAL MARKETS DAY 2017 The automotive strategy of voestalpine Wolfgang Eder, CEO www.voestalpine.com voestalpine GROUP BUSINESS MODEL» voestalpine is a leading technology and capital goods group with
More informationQForm Forum. Berlin May Latest developments in numerical simulation of metal forming and heat treatment processes
QForm Forum. Berlin 27-29 May 2019 Latest developments in numerical simulation of metal forming and heat treatment processes Contact persons: Mr. Paul Mordvintsev Head of Business Development Department
More informationLaser welding of modern automotive high strength steels
Laser welding of modern automotive high strength steels Hardy Mohrbacher Niobium Products Company GmbH, Steinstrasse 28, D-40210 Düsseldorf, Germany Abstract: The paper demonstrates the correlation between
More informationThermo-Calc Software. Thermo-Calc User Seminar CALCULATING THERMODYNAMIC PROPERTIES TC-PRISMA. Aachen, September 11th, 2008
CALCULATING THERMODYNAMIC PROPERTIES Thermo-Calc User Seminar TC-PRISMA Aachen, September 11th, 2008 http://www.thermocalc.com Phone: +46 8 545 959 30 E-mail: info@thermocalc.se Fax: +46 8 673 3718 Outline
More informationSKC 25 years of nuclear technology in Sweden! Hans Henriksson 10 Oct 2017
SKC 25 years of nuclear technology in Sweden! Hans Henriksson 2 Consists of Swedish nuclear industry: All Swedish nuclear power plants Nuclear service provider and fuel manufacturer Universities Research
More informationSeismic assessment and upgrading of existing structures
European Association for Earthquake Engineering Swiss Society for Earthquake Engineering and Structural Dynamics 20 th EUROPEAN REGIONAL EARTHQUAKE ENGINEERING SEMINAR Seismic assessment and upgrading
More informationProgram. Fact-Finding Mission South Africa Energy Efficiency in Industry Date: July 18 th -21 st, 2016 Location: Berlin (Germany)
Overview Program Fact-Finding Mission South Africa Energy Efficiency in Industry Date: July 18 th -21 st, 2016 Location: Berlin (Germany) The Renewables Academy (RENAC) AG is organizing a fact-finding
More informationFifteen Seconds Festival Guide 2018
Fifteen Seconds Festival Guide 2018 Welcome to Europe s leading interdisciplinary business festival. Graz, June 7-8, 2018 Location Stadthalle Graz Entry via Fröhlichgasse 39, 8010 Graz. Map view entry:
More informationFIDIC for PRACTITIONERS TRAINING COURSES Entitled. Module 3: DISPUTE ADJUDICATION
Nestor Bildungsinstitut GmbH Nestor-FIDIC Federation of International Consulting Engineers FIDIC for PRACTITIONERS TRAINING COURSES Entitled Module 3: DISPUTE ADJUDICATION 13 th September 14 th September
More informationCOLD-ROLLED STEEL STRIP
COLD-ROLLED STEEL STRIP Range of supply April 2019 voestalpine Steel Division www.voestalpine.com/steel Mild steels EN 10130 R e A 80 r 90 n 90 E DC01 EN 10130 Trans. 140-280 270-410 28 - - - DC03 EN 10130
More informationCorporate Governance Report
Corporate Governance Report Commitment to the Austrian Corporate Governance Code The Austrian Corporate Governance Code provides domestic stock corporations with a framework for managing and monitoring
More informationResearch and Development of Cold Rolled Hot-dip Galvanized DP590 Steel with Low Cost
2015 2 nd International Conference on Material Engineering and Application (ICMEA 2015) ISBN: 978-1-60595-323-6 Research and Development of Cold Rolled Hot-dip Galvanized DP590 Steel with Low Cost Yun
More informationCONTINUOUS CASTING. Metals Magazine 1/2015 Technology Continuous Casting
68 9 CONTINUOUS CASTING papers will be presented by Primetals Technologies specialists at the ESTAD Congress covering the topics of slab, billet and bloom casting in addition to automation, logistics and
More information3DSE Management Summit 2015 Global Product Development 2015 Adapting RnD organizations to future challenges.
3DSE Management Summit 2015 Global Product Development 2015 Adapting RnD organizations to future challenges. Date: Friday, January 30 th, 2015 Location: Kaufmanns Casino Odeonsplatz 6, Entrance Galeriestrasse,
More informationSHARE OUR PASSION FOR RAILWAY SOLUTIONS. «A passion for railway solutions»
SHARE OUR PASSION FOR RAILWAY SOLUTIONS «A passion for railway solutions» CONSULTING ENGINEERING SYSTEMS PROJECTS «At Molinari Rail we want to use our broad technology knowledge to design and to deliver
More informationDiffusion in Fe-base Thick Coatings Produced by Hot Extrusion
Diffusion in Fe-base Thick Coatings Produced by Hot Extrusion S. Weber, P. Silva Max-Planck-Institut für Eisenforschung GmbH Materials Diagnostics and Steel Technology Prof. Dr.-Ing. A.R. Pyzalla Düsseldorf
More informationEuropean 3D TSV Summit 2014 Sponsorship Opportunities
European 3D TSV Summit 2014 Sponsorship Opportunities European 3D TSV is a unique event launched by SEMI Europe in 2013 to address 3D TSV technologies, manufacturing challenges and business related issues.
More informationEFFECT OF HEAT TREATMENT ON PROPERTIES OF HOT-WORK TOOL STEEL. Janusz KRAWCZYK, Piotr BAŁA
EFFECT OF HEAT TREATMENT ON PROPERTIES OF HOT-WORK TOOL STEEL Janusz KRAWCZYK, Piotr BAŁA AGH University of Science and Technology Faculty of Metals Engineering and Industrial Computer Science Department
More informationRegistration Form. Course name: 1. Name: E mail: 2. Name: E mail: 3. Name: E mail: 4. Name: E mail: 5. Name: E mail: 6.
TRAINING COURSES Registration Form Please send this form by e mail: indielec@indielec.es Training course: Course name: Starting date: / / Price: (VAT not included) Course attendees: 1. Name: E mail: 2.
More informationIWOTE th International Workshop on Thermal Forming and Welding Distortion. April 09-10, 2014 Bremen, Germany. Program
IWOTE 14 Program 4 th International Workshop on Thermal Forming and Welding Distortion April 09-10, 2014 Bremen, Germany Introduction Increasing economic pressure and pursuit for resource-saving complex
More informationLM043: Production Management and Material Requirements Planning
LM043: Production Management and Material Requirements Planning LM043 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: The overall aim of this course is to provide participants with the knowledge,
More informationWorld Trade Center Curacao, Cost of Service Course presented by PURC Organized by AQUALECTRA Curacao, Water & Power
Overview and Purpose of Cost of Service Studies/ Priorities in Rate Design/ Determining the Revenue Target/ Roles and Impacts of Prices/ Issues in Rate Design/ Uniform System of Accounts/ Embedded Cost
More informationInternational User Convention LucaNet.World 24-25/11/2016 // Berlin
International User Convention LucaNet.World 24-25/11/2016 // Berlin LucaNet.World International User Convention in the Heart of Berlin On 24/11/2016 and 25/11/2016, our popular user convention takes place
More informationSTEYR CAMPUS. Global Management Summer School. University of Applied Sciences Upper Austria School of Management, Steyr Campus Austria/Europe
STEYR CAMPUS Global Management Summer School 30 th June - 19 th July 2014 University of Applied Sciences Upper Austria School of Management, Steyr Campus Austria/Europe www.fh-ooe.at/campus-steyr Global
More information31 st Conference of the International Society of Environmental Epidemiology. Sponsorship and Exhibition Prospectus
31 st Conference of the International Society of Environmental Epidemiology Sponsorship and Exhibition Prospectus Invitation Welcome to ISEE 2019! The 31st annual conference of the International Society
More informationcorrender Hot-dip galvanized steel strip: A new perspective voestalpine Steel Division Josef Elmer, Key account manager
Hot-dip galvanized steel strip: A new perspective Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Hot-dip galvanized steel strip: A new perspective corrender is the
More informationCOURSES IN DESALINATION
European Desalination Society COURSES IN DESALINATION Genoa University Department of Chemistry and Industrial Chemistry Lecturer Dr. Corrado Sommariva Genoa, Italy June 25 26, 2014 June 27, 2014 Thermal
More informationBest Practices & Thought Leadership in Identity Management. European Identity Conference (EIC)
Kuppinger Cole European Identity Conference (EIC) With more than 450 attendees from 23 countries, European Identity Conference 2008 in Munich has been a major platform in Europe to create, support and
More informationEffect of Carbon and Manganese on the Quenching and Partitioning Response of CMnSi Steels
, pp. 137 144 Effect of Carbon and Manganese on the Quenching and Partitioning Response of CMnSi Steels Emmanuel De MOOR, 1) John Gordon SPEER, 1) David Kidder MATLOCK, 1) Jai-Hyun KWAK 2) and Seung-Bok
More informationFocus Day Network and Dealer Inventory Management
Updated Brochure Focus Day Network and Dealer Inventory Management Organized by ISLA April 22 nd, 2015, Germany In cooperation with CLAAS Original Equipment Manufacturers from across industries have made
More informationVANADIUM MICROALLOYED NON-QUENCHED STEEL FAMILY FOR PLASTIC MOULD
VANADIUM MICROALLOYED NON-QUENCHED STEEL FAMILY FOR PLASTIC MOULD L. Jiang, W. Hua, Q. Yan Technical center, Baoshan Iron and Steel Cor. Lit. Shanghai 201900 China Abstract Keywords: The vanadium microalloyed
More information11th European GSE / IBM Technical University for z/vse, z/vm, KVM and Linux on IBM z Systems
23rd 25th October 2017, Le Méridien Hotel, Hamburg, y Strategic new Innovations and Technical Highlights IBM z Systems z/vse z/vm KVM on IBM z Systems Linux on IBM z Systems 11th European GSE / IBM Technical
More information2015 EXCELLENCE IN METALLOGRAPHY AWARD
EVOLUTION OF STRAIN-INDUCED PRECIPITATES IN A MOLYBDENUM-BASE Mo-Hf-C ALLOY David Lang,* Jürgen Schatte,** Wolfram Knabl,*** Roland Dallinger,**** Helmut Clemens***** and Sophie Primig****** INTRODUCTION
More informationWorkshop: PELLETS AND MICROPELLETS FOR ORAL MULTIPARTICULATE DOSAGE FORMS October 2017
Workshop: PELLETS AND MICROPELLETS FOR ORAL MULTIPARTICULATE DOSAGE FORMS 10-12 October 2017 BACKGROUND More and more pharmaceutical products are reaching the market as multiparticulate dosage forms, mainly
More information