THREADLOCKERS THREAD SEALANTS RETAINING COMPOUNDS LIQUID GASKETING CYANOACRYLATES ANTI-SEIZE COMPOUNDS UV CURABLES EPOXIES AND MORE!

Transcription

1 THREADLOCKERS THREAD SEALANTS RETAINING COMPOUNDS LIQUID GASKETING CYANOACRYLATES ANTI-SEIZE COMPOUNDS UV CURABLES EPOXIES AND MORE!

2 A Company You Can Rely On Since 1955, ND Industries has been providing top quality fastening and assembly related products and services to a wide variety of industries including automotive, electronics, aerospace, appliance, and many more. ND's commitment to improvement has led to a continuous investment in the best equipment, facilities, and people to serve you. Vibra-TITE TM A Trademark of ND Industries Vibra-TITE is one of the world s market leaders in anaerobics, cyanoacrylates, epoxies and ultra-violet technologies. Vibra-TITE is quickly becoming one of the most highly respected names in the adhesive industry. And, as a result of ND s low overhead expenses and in-house capabilities, Vibra-TITE products offer the same high quality and superior performance of other name brand products AT A COST SAVING OF UP TO 40%. A Trademark of ND Industries A Single-Source Supplier ND is a vertically integrated company and has achieved a unique position in today s market place with a wide range of products designed to seal, cushion, insulate, temporarily retain, and control noise and vibration. ND's high quality line of products, customer driven solutions and on-time-delivery is the reason why more companies are turning to ND as their single-source supplier. A Global Presence ND owns and operates numerous facilities in North America. ND s latest state of the art expansion includes facilities in Taiwan and China with licensees located throughout the world. No matter where they are located, each ND facility is a fully supported member of the ND family dedicated to providing innovative, affordable fastening and assembly related products and services. 2

3 Table of Contents Anaerobic Threadlockers Vibra-TITE VC-3 TM Original Thread Sealing Retaining Liquid Gasketing Anti-Seize Lubricants Cyanoacrylates Light Cure Adhesives Structural Adhesives Primers, Accelerators & Activators Epoxies Hot-melts / Urethane MMA s Vibra-TITE Specialty Products ND R & D, Chemical Blending, and Private Label Services ND Pre-Applied Products and Services Call: or visit: or ND, ND logo and ND Industries are registered trademarks of ND Industries, Inc. Vibra-TITE TM is a trademark of ND Industries, Inc. 3

4 Anaerobic THREADLOCKERS Locks and seals threaded fasteners Stops fasteners from loosening from shock and vibration Performs better than lock washers, bevel washers, and other forms of mechanical locking devices Alleviates rust-lock Prevents leakage NEW! NEW! 4 Vibra-TITE Available Loctite Product Color Approx. Max Gap Torque Strength, Temperature Fixture Time Specific Suggested Agency Part # Sizes Part # Description Viscosity (cp) (FILL, IN) Break/Prevail (in LB) Range (MIN) Gravity Primer Approvals LOW STRENGTH ml bullet * Easy to remove Purple 1,200/5, /25-65 F to +300 F 10 to T or N MIL-S-46163A ml bottle for fasteners smaller Thixotropic ASTM D ml bottle than 1/4" in diameter. NSF ml bottle * L bottle * 242 MEDIUM STRENGTH ml bullet * Removable Grade Blue 1,200/5, /45-65 F to +300 F 10 to T or N MIL-S-46163A ml bottle for bolts 1/4" to 3/4 Thixotropic ASTM D ml bottle in diameter. NSF ml bottle L bottle MEDIUM STRENGTH GEL ml pump Removable Grade Blue Gel /45-65 F to +300 F 10 to T or N for nuts or bolts 1/4" to 3/4 in diameter OIL TOLERANT ml bullet * Used on fasteners Blue 2,250-12, /70-65 F to +300 F T or N ml bottle from 1/4" to 3/4" Thixotropic ml bottle in diameter ml bottle L bottle PERMANENT STRENGTH ml bullet * Permanently locks Red 1,800/5, / F to +300 F 5 to T or N MIL-S-46163A ml bottle nuts or bolts up to Thixotropic ASTM D ml bottle than 3/4 in diameter. NSF ml bottle L bottle PERMANENT STRENGTH GEL ml pump Locks nuts or bolts Red Gel / F to +300 F 5 to T or N up to 1/4 in diameter HIGH TEMP / HIGH STRENGTH ml bottle Locks nuts and bolts up Red 9, / F to +450 F 5 to T or N ml bottle to 1 1/2 in diameter in L bottle high temp applications. HIGH STRENGTH ml bullet * Permanently locks Red / F to +300 F 10 to T or N MIL-S-46163A ml bottle nuts or bolts ASTM D ml bottle up to 1 in diameter ml bottle L bottle LARGE DIAMETER / HIGH STRENGTH ml bullet * Permanently locks Red 7, / F to +300 F 10 to T or N MIL-S-46163A ml bottle nuts or bolts up to ASTM D ml bottle /2 in diameter ml bottle L bottle WICKING GRADE / MEDIUM STRENGTH ml bullet * Used on pre-assembled Green / F to +300 F 5 to T or N MIL-S-46163A ml bottle fasteners up to 1/2 in ASTM D ml bottle diameter and porous NSF ml bottle die castings L bottle *Corresponding size not available.

5 Anaerobic Threadlockers NEW Introduction! 2 ml Resealable Bullet Tubes Applications in each Tube! Vibra-TITE 111 Low Strength Threadlocker that eliminates vibrational loosening and seals against leakage and corrosion. Ideal for use on assemblies requiring periodic adjustment. Typical uses include soft metal fasteners, precision screws, and locking fasteners smaller than 1/4 in (6mm) diameter. COMPARE TO LOCTITE 222 Vibra-TITE 121 Medium, Removable Strength Threadlocker that seals nuts and bolts allowing disassembly using standard tools. Typical uses include locking nuts or bolts from 1/4 to 3/4 (6-60mm) in diameter. COMPARE TO LOCTITE 242 Vibra-TITE 122 Medium Strength Threadlocker with greater oil tolerance. Typical uses include locking nuts or bolts ranging from 1/4 to 3/4 (20-60mm) in diameter. COMPARE TO LOCTITE 243 Vibra-TITE 131 High Strength Permanent Threadlocker for maximum security suitable for most applications where disassembly is not required. Designed to withstand extreme environmental conditions and chemical exposure. Ideal for the prevention of rust and corrosion. Typical uses include permanently locking nuts or bolts up to 3/4 (60mm) in diameter. Heat and hand tools are needed for disassembly. COMPARE TO LOCTITE 262 Vibra-TITE 137 High Strength Threadlocker for maximum security that withstands temperatures to F. Typical uses include bolts up to 1 1/2 in diameter. Heat and hand tools are needed for disassembly. COMPARE TO LOCTITE 272 Vibra-TITE 140 High Strength Threadlocker for maximum security. Suitable for most applications where disassembly is not required. Typical uses include permanently locking nuts or bolts up to 1 (25mm) in diameter. Heat and hand tools are needed for disassembly. COMPARE TO LOCTITE 271 Vibra-TITE 146 High Strength Threadlocker. Typical uses include permanently locking nuts or bolts up to 1 1/2 in diameter. Heat and hand tools are needed for disassembly. COMPARE TO LOCTITE 277 Vibra-TITE 150 Wicking Grade, Medium Strength Threadlocker designed specifically for use on pre-assembled connections. Seals small gaps through capillary action. Typical uses include pre-assembled fasteners up to 1/2 in diameter and porous die castings. Protects welds from rust and corrosion. Hand tools are needed for disassembly. COMPARE TO LOCTITE 290 Vibra-Tite Anaerobic Threadlockers lock and seal threaded fasteners. Liquid threadlockers are considered to be the most effective method of locking threaded fasteners because they utilize the entire assembly. They perform better than traditional mechanical devices such as lock washers preventing any loosening from shock and vibration. Low Strength Typical uses: Soft metal fasteners Locking fasteners smaller than ¼" in diameter. Medium Strength Typical uses: Locking nuts or bolts larger than ¼" in diameter. High Strength Typical uses: Permanently locking nuts or bolts larger than ¼" in diameter. Wicking Grade Typical uses: Pre-assembled fasteners and porous die castings. THREADLOCKERS Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite 242 are registered trademarks of the Henkel Corporation 5

6 100 ct. 2ml Bullet Tubes in handy counter-top fishbowl display. Available with 121 and 131 threadlockers. Anaerobic Threadlockers NEW Introduction! Part #12199 Vibra-TITE 121* Fishbowl with 100 ct. 2ml Bullet Tubes Medium Strength Threadlocker *COMPARE TO LOCTITE 242 Part #13199 Vibra-TITE 131* Fishbowl with 100 ct. 2ml Bullet Tubes Medium Strength Threadlocker *COMPARE TO LOCTITE 262 #13535 High Strength Threadlocker Gel NEW Introduction! #12535 Medium Strength Threadlocker Gel Part #13535 High Strength Threadlocker in 35ml pump dispenser. Part #12535 Medium Strength Threadlocker in 35ml pump dispenser. 6 No Mess! No Waste! No-drip formulas provide complete coverage every time!

7 Not an Adhesive! Not an Anaerobic! Vibra-TITE VC-3 Original is a powerful locking and sealing coating for threaded fasteners that works on the principle of "friction through viscosity". Vibra-TITE VC-3 Original utilizes a special blend of acrylic resins to prevent fasteners from loosening even under the stress of prolonged and extreme shock and vibration. Vibra-TITE VC-3 also works to resist leakage at fastening points by acting as a dam between mated threads. Reusable 5 or more times! Part # cc bottle with brush/cap applicator. Part # cc can. One Tough Application! Stops fasteners from loosening from extreme shock and vibration Works with metal, wood, plastic and more Fasteners are easily adjusted, removed and reused Works on fasteners of any shape or size, from tiny eyeglass screws to large construction bolts Works with internal or external threads This product is approved by TACOM* for use on the US Army s main battle tank! *US Army Tank-automotive and Armaments Command Part# THREADLOCKERS Vibra-TITE VC-3 Original Specifications Container size (manual application)....1oz. (30 cc), 8 oz. (250 cc), or larger containers Color Red (custom colors are also available) Solvent Methyl ethyl ketone Cured form resilient plastic Shelf life indefinite (under ideal storage conditions) Chemical resistance offers resistance to most solvents (acts as a partial corrosion barrier) Total resistance fresh and salt water Dries to touch in seconds Dries for use in minutes Drying method for bulk production.....best achieved using considerable airflow in addition to temperature not exceeding 130 o F Operational temperature range o F to +165 o F (-54 o C to +74 o C) For other temperature applications, please consult factory Reusable or more times Engagement torque moderate Breakaway No distinct break; slow, fluid release as material cold flows Standard coating length to 1 1/2 times diameter Lead thread requirement none Thread fill requirement % of the thread root area Note: See MSDS for Safety & Material Handling Instructions Vibra-Tite VC-3 Original meets or exceeds the performance requirements of the following specifications and/or standards: MILITARY OEM Mis U.S. Air Force Part # U.S. Army Tank Automotive Command (General Dynamics) Part # National Stock Number NSN Detroit Diesel 9S244 & 9S256 Grumman Aerospace Standard GF105VP1, CA1 Allied Signal Aerospace Company Part #EMS73314 Call: or visit: or Vibra-TITE VC-3 Original is a registered trademark and Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite 242 are registered trademarks of the Henkel Corporation 7

8 THREAD SEALANTS Seals and secures metal pipes and fittings Fills the space between threaded metal parts Prevents leakage caused by tape shredding, vibration loosening, solvent evaporation, damaged threads Prevents corrosion and galling of threads Low and high pressure applications Seals to the pipe burst strength Facilitates assembly Service removable NEW! NEW! NEW! Vibra-TITE Available Loctite Product Color Approx. Max Gap Sealing Pressure Temperature Cure Speed Suggested Agency Part # Sizes Part # Description Viscosity (cp) (FILL, IN) (cp) (PSI) Range (MIN) Primer Approvals /592 INDUSTRIAL GRADE SEALANT ml tube 56531/ Industrial grade, White 150,000 to , F to +300 F 60 T or N controlled locking 550, ml tube 56541/ strength, metal fit. (Paste) High temp & high oz. jar with Brush Top * performance L bottle 56543/ PNEUMATIC / HYDRAULIC SEALANT ml bottle Pneumatic and Purple 16, , F to +300 F 30 T or N ml bottle hydraulic sealant L bottle * for fluid, power and gas system connections HYDRAULIC SEALANT ml bottle Hydraulic sealant, Brown 300 to , F to +300 F 10 T ml bottle non shrink, high L bottle * vibration and shock resistant REFRIGERANT SEALANT ml bottle * Refrigerant sealant. Red 6000 to , F to +300 F 10 T or N ml bottle Maximum solvent L bottle * resistance HIGH TEMP / STAINLESS STEEL SEALANT ml bottle General purpose White 350, , F to +400 F 60 T or N GM ml bottle stainless steel and NFS L bottle other inert metal threaded pipe and fittings HIGH STRENGTH / YELLOW ml tube High performance Yellow 420, , F to +300 F 90 T or N sealant. *Corresponding size not available. 8

9 Thread Sealants Seal up to Pressures of 10,000 psi Vibra-TITE 420 Industrial Grade Sealant cures rapidly with controlled lubricity preventing galling while protecting from corrosion and rust. Parts may be repositioned up to 24 hours after assembly. Typical uses include stainless steel and all other metal fittings. COMPARE TO LOCTITE 565/592 Vibra-TITE 440 Hydraulic & Pneumatic High Pressure Sealant with excellent solvent resistance. It locks hydraulic and pneumatic connections producing a high strength, high pressure seal, while allowing easy disassembly with standard tools. Typical uses include pneumatic fittings, small pipe threads, and hydraulic fittings up to 2 in diameter. COMPARE TO LOCTITE 545 Vibra-TITE 444 High Pressure Sealant is a general purpose pipe sealant that creates an instant seal on threaded joints with a high resistance to solvents and withstands temperatures to 300 o F (149 o C). Typical uses: Small pipe threads and hydraulic fittings. COMPARE TO LOCTITE 569 Vibra-TITE 446 High Pressure Sealant Refrigerant Sealant provides excellent resistance to solvents on threaded pipes and fittings up to 3 in diameter. Typical uses include refrigeration systems and service with volatile chemicals. COMPARE TO LOCTITE 554 Vibra-TITE 460 PTFE Instant Pipe Sealant prevents galling and provides an instant low pressure seal on coarse fitting threads which is further strengthened as the product cures. Assembled parts can withstand temperatures up to 400 o F and may be repositioned up to 24 hours after assembly. Typical uses include stainless steel, aluminum, galvanized metal and other inert metal threaded pipe fittings. COMPARE TO LOCTITE 567 Vibra-TITE 427 High Pressure Yellow Sealant High Viscosity locks and seals threaded fittings with high performance withstanding temperatures up to 300 o F. Vibra-Tite Anaerobic Thread Sealants seal and secure metal pipes and fittings, by filling the space between threaded metal parts. Thread sealants prevent leakage caused by tape shredding, vibration loosening, solvent evaporation, and damaged threads. Vibra-TITE products are designed for both low and high pressure applications. Thread sealants seal to the burst strength of most piping systems. Because of the lubricating properties, Vibra-TITE thread sealants make it easy to assemble fittings as well as prevent galling of the threads. For repairs, parts may be disassembled with basic hand tools. THREAD SEALANTS Benefits : Lubricates during assembly Seals regardless of assembly torque Seals to the burst rating of the pipe Provides controlled disassembly torque Easy dispensing Good chemical and temperature resistance, 300 F (150 C) Instant seal Seals and secures metal fittings Typical Applications: Fire protection industry Chemical processing industry Petroleum refining industry Waste treatment facilities Utilities and power generation Gas compression and distribution Automotive and industrial equipment Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite is a registered trademark of the Henkel Corporation 9

10 RETAINING COMPOUNDS Increases the shear strength on non-threaded, cylindrical metal assemblies Fills voids between close-fitting metal assemblies Creates a solid one-piece assembly Seals joints against leakage Prevents corrosion Vibra-TITE Available Loctite Product Color Approx. Max Gap Shear Strength Temperature Fixture Time Specific Suggested Agency Part # Sizes Part # Description Viscosity (cp) (FILL, IN) (PSI) Range (MIN) Gravity Primer Approvals /675 GENERAL PURPOSE RETAINING COMPOUND ml bullet * Retaining Compound Green > F to +300 F 10 to T or N MIL-R ml bottle Typical uses: rotors, ASTM D ml bottle augment press fits, GM ml bottle 60941/ shafts, bushings, bearings, and pulleys L bottle HIGH STRENGTH RETAINING COMPOUND ml bottle High strength for loose Green > F to +300 F T or N ml bottle fitting parts L bottle * HIGH STRENGTH RETAINING COMPOUND ml bottle High strength gap filling Green > F to +300 F 20 to T ml bottle product. Permanently ml bottle retains slip-fit L bottle Typical uses: rotors, shafts, impellers, and splines HIGH STRENGTH RETAINING COMPOUND ml bottle * High viscosity Green > F to +300 F 20 to T MIL-R ml bottle permits larger machine ASTM D ml bottle tolerances.typical uses: L bottle * rotors, shafts, impellers, and splines. 546 N/A IMPACT RESISTANT RETAINING COMPOUND ml bottle * Flexible for impact Green > F to +300 F 20 to N ml bottle * resistance L bottle * RAPID CURING RETAINING COMPOUND ml bottle Fast fixturing for close Green > F to +350 F T or N ml bottle fitting parts, high L bottle * strength for stainless steel CORE PLUG SEALANT ml bottle Blue > F to +300 F 10 to N HIGH TEMPERATURE RETAINING COMPOUND ml bottle * High strength adhesive Green > F to +400 F 5 to T or N MIL-R ml bottle Typical uses: rotors, ASTM D ml bottle shafts, bushings, L bottle * bearings, and pulleys HIGH TEMPERATURE RETAINING COMPOUND ml bottle High strength adhesive Green > F to +450 F 20 to T or N GM ml bottle Typical uses: rotors, ml bottle shafts, bushings, L bottle bearings, and pulleys. *Corresponding size not available. 10

11 Retaining Compounds Vibra-TITE 530 General Purpose Retaining Compound bonds metal assemblies. A low viscosity retaining compound recommended for diametral gap distances up to to augment press fits. Withstands temperatures of up to 300 o F providing a shear strength of 3,000psi after 24 hours with a fixture time of 10 minutes. Typical uses: Rotors, shafts, bushings, bearings, and pulleys. COMPARE TO LOCTITE 609/675 Vibra-TITE 538 Slip Fit / High Strength Retaining Compound maximum strength for use where high dynamic force or cyclic loading is anticipated. COMPARE TO LOCTITE 638 Vibra-TITE 541 High Strength Retaining Compound that cures in room temperatures filling diametral gaps up to Typical uses include fitted cylindrical parts replacing set screws, clamp rings, and snap rings. It provides a shear strength greater than 3,000psi after 24 hours with a fixture time of 10 minutes. COMPARE TO LOCTITE 680 Vibra-TITE 542 High Strength Retaining Compound is a high viscosity retaining compound that allows parts to be adjusted during assembly. It provides a shear strength greater than 4,000psi. Typical uses include slip fit components, rotors, shafts, impellers, and splines. COMPARE TO LOCTITE 635 Vibra-TITE 546 Substantial Impact Resistance flexible for high shock/impact performance from hub to rotor. Vibra-TITE 548 Press Fit / Rapid Cure works with continuous operating temperatures up to 350 O F. It provides a shear strength greater than 3,500psi. COMPARE TO LOCTITE 648 Vibra-TITE 550 Core Plug Sealant COMPARE TO LOCTITE Vibra-Tite Anaerobic Retaining Compounds are designed to increase shear strength on non-threaded, cylindrical metal assemblies. The liquid anaerobic material fills voids between close-fitting metal assemblies. It cures to a toughened thermoset-plastic which creates a solid one piece assembly. Retaining compounds seal joints against leakage and prevent corrosion. These materials have gained wide acceptance as a standard method for assembling press-fit and slip-fitted parts. RETAINING Vibra-TITE 560 High Temperature Retaining Compound is a high temperature (400 o F), high strength adhesive for retention of cylindrical components, where disassembly is not required on press-fit assemblies. It provides a shear strength greater than 3,000psi. Typical uses: Rotors, shafts, bushings, bearings, and pulleys with temperatures up to 400 O F. COMPARE TO LOCTITE 640 Vibra-TITE 567 High Temperature Retaining Compound locks metal cylindrical assemblies with diametral clearances up to Provides a shear strength greater than 3,500 psi on steel sealing against leakage while preventing corrosion. Typical uses: Rotors, shafts, bushings, bearings, and pulleys. COMPARE TO LOCTITE 620 Benefits: Reduce machining costs Press/shrink fits can be replaced with slip fits No expensive finishes required Increase mechanical strength of the assembly 100% surface contact Retains and seals, eliminate corrosion and seizure Restore fit to worn or out-oftolerance assemblies Eliminate part replacement Part distortion is eliminated Typical Applications Mount bearings in housings or shafts Mount motors, gears, sprockets and pulleys on shafts Retain cylindrical linings Replace keys and set screws Augment slip fits Lock keyways Secure splines, Bushings, Bearings, Oil seals, Water pumps, Core plugs Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite is a registered trademark of the Henkel Corporation 11

12 LIQUID GASKETING Form-In-Place Gasket for close fitting rigid metal flanges. Ideal for flanges that move in service. Vibra-TITE Anaerobic Liquid Gasketing is designed primarily for close fitting (small gap) rigid metal flanges. The Anaerobic material remains liquid when exposed to air, but cures when confined between mating flanges. Anaerobic liquid gasketing can fill gaps of (primed) and alleviates the need for preformed gaskets. It is ideal for flanges that move in service and can be used as form-in-place gaskets. Benefits: Remains liquid when exposed to air Cures when confined between mating flanges Can fill gaps as large as 0.050* Alleviates the need for preformed gaskets Typical Applications: Can be used as a Form-In-Place Gasket for: Thermostats Compressors Pumps Transmission housings Gearboxes Axle covers 12 Vibra-TITE Available Loctite Product Color Approx. Max Gap Temperature Cure Speed Specific Suggested Agency Part # Sizes Part # Description Viscosity (cp) (FILL, IN) Range Gravity Primer Approvals GASKET MAKER ml tube * Flexible flange sealant Blue 65,000/ Unprimed: -65 F to +300 F Unprimed: 1.12 T or N N/A withstands minor 200, hrs. movements caused by Thixotropic Primed: Primed: vibrations. Fluorescent hrs. blue color aid visual assembly inspections HIGH TEMPERATURE RIGID FLANGE SEALANT ml tube High temperature Red 188,000/ Unprimed: -65 F to +400 F Unprimed: 1.16 T or N N/A ml tube rigid flange sealant 500, hrs. withstands temperatures Thixotropic Primed: Primed: to 400 F with excellent min. - 4 hrs. chemical and solvent resistance FLEXIBLE GASKET MAKER ml tube Solvent resistant Red 800,000/ Unprimed: -65 F to +300 F Unprimed: 1.13 N GM ml tube * Aluminum flange 3,750, hrs ml surfaces, flexible Thixotropic *Primed: Primed: cartridge parts.flexible gasket min. - 2 hrs. for rigid machine flanges. Eliminates pre-formed, pre-cut paper, rubber and cork gaskets FLEXIBLE GASKET MAKER ml tube 250 ml tube * General purpose gasket maker that Purple 275,000/ 950,000 Unprimed: F to +300 F Unprimed: 4-24 hrs N N/A flexes with flanges. Thixotropic *Primed: Primed: Eliminates pre-formed, min. - 4 hrs. pre-cut paper, rubber and cork gaskets. *Corresponding size not available.

13 ANTI-SEIZE LUBRICANTS The Anti-Seize 907 family of lubricants is specially formulated to prevent seizing, galling, pitting, excessive wear, and corrosion. The lubricating formulation is a protective paste consisting of fine flakes of graphite suspended in a blend of lubricants and oils. It will not wash, squeeze or burn out, even at elevated temperatures and high pressures. NEW! Vibra-TITE Available Loctite Product Color Approx. Temperature K-Value Agency Part # Sizes Part # Description Viscosity (cp) Resistance Approvals 907A Silver ANTI-SEIZE COMPOUND ALUMINUM ml bullet * Lubricant ideal for all Silver 120, F (871 C) 0.18 MIL A-907E oz metals to prevent 175,000 GM-6108M brush-top can seizing, galling and Paste oz excessive wear. brush-top can Resists harsh chemical oz environments. brush-top can 907C C5-A ANTI-SEIZE COMPOUND COPPER ml bullet * Lubricant ideal for use Copper 120, F (982 C) oz tube * on softer metal parts 175, oz such as copper and Paste brush-top can brass. Protects from oz rust and corrosion as brush-top can well as prevents oz seizing, galling and brush-top can excessive wear. Excellent resistance to harsh chemical environments. 907N Nickel ANTI-SEIZE COMPOUND NICKEL ml bullet * Lubricant ideal for Silver 500, F (1315 C) oz. extreme temperature 350,000 brush-top can * copper free base. Paste oz Resistant to harsh brush-top can chemical environments oz Excellent for stainless brush-top can steel and other metal fittings. *Corresponding size not available. Versatile: Vibra-TITE Anti-Seize 907 is available in four different formulas: 1) 907A Aluminum-graphite is a general purpose lubricant. Resists seizing, galling, galvanic attack, and excessive wear. 2) 907C Copper-graphite is a general purpose lubricant. Ideal for soft metal parts, plastics and nonmetallic gasketing. 3) 907N Nickel-graphite is a high temperature lubricant suitable where different metals (such as brass and steel) come in contact. This product is also available Pre-Applied. NEW Introduction! 2 ml Bullet Tubes Multiple Applications in each Tube! GASKETING & LUBRICATING Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite is a registered trademark of the Henkel Corporation 13

14 CYANOACRYLATES are single-part clear adhesives that rapidly polymerize at room temperature and develop strength extremely fast (fixture 0 to 60 seconds). They are initiated by moisture on the parts surface or by accelerators. NEW Introduction! Cyanoacrylates, commonly known as Super Glues, are highly useful in virtually every industry. Some of the higher volume applications include printed circuit board wires and a broad range of medical devices. OEM applications include small and large appliances, automotive applications, toys, and cosmetic packaging. MRO applications include repair of plastic, rubber and metal parts. Everyday consumers are a large volume user of Super Glues for use and repair on everything from crafts to broken toys and household gadgets. # ml Resealable Bullet Tubes 15-25Applications in each Tube! Factors that Effect CA Performance Low humidity = slower cure speed Low viscosity for small gaps Difficult to bond surfaces: Teflon, Silicone, Polyethylene, Polypropylene Excess adhesive - Less is best Typical Applications Wire tacking on PC boards Ceramic, fabric, metal and leather bonding Bonding molded parts such as automotive weather striping, wiper blades Speaker cones Identification tags to equipment Bonding control panel switches Bond rubber pads to equipment base or legs 14 Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite is a registered trademark of the Henkel Corporation

15 CYANOACRYLATES Vibra-TITE Available Loctite Product Category Color Approx. Max Gap Shear Temperature Fixture Specific Agency Part # Sizes Part # Description Viscosity (cpa) (FILL, IN) Strength (PSI) Range Time Gravity Approvals GENERAL PURPOSE INSTANT SUPERGLUE ml bullet * Wicking type plastic Ethyl Clear , F to +180 F A-A3097 Type II oz bottle bonder. seconds CL1 Ethyl lb bottle CL 2 Ethyl ml bullet * General purpose. Ethyl Clear , F to +180 F A-A3097 Type II oz bottle seconds CL1 Ethyl lb bottle GM ml bullet 1 oz bottle * Plastic bonder. Ethyl Clear , F to +180 F GM lb bottle seconds ml bullet * Thermal cycling. Ethyl Clear , F to +180 F N/A gm bottle * seconds lb bottle ml bullet General purpose. Ethyl Clear , F to +180 F N/A oz tube seconds lb bottle ml bullet * Wire tacking. Ethyl Clear , F to +180 F N/A oz bottle * seconds lb bottle ml bullet * Gap filling oz bottle plastic bonder. Ethyl Clear 1, , F to +180 F 30 seconds 1.05 A-A3097 Type II CL3 Ethyl lb bottle ml bullet * Gap filling plastic Ethyl Clear 2, , F to +180 F A-A3097 Type II oz bottle bonder. seconds CL3 Ethyl lb bottle ml bullet * Gap filling Ethyl Clear 5, , F to +180 F N/A gm bottle wire tacking seconds lb bottle gm tube * General purpose gel. Ethyl Clear Thixo Gel , F to +180 F A-A3097 Type II gm tube seconds CL3 Ethyl SURFACE INSENSITIVE SUPERGLUE ml bullet * Surface Insensitive Ethyl Clear , F to +180 F N/A gm bottle wicking grade. seconds lb bottle ml bullet * General purpose Ethyl Clear , F to +180 F N/A gm bottle surface Insensitive. seconds lb bottle gm tube * Surface Insensitive. Ethyl Clear ,000-3, F to +180 F lb bottle * seconds gm tube * Surface Insensitive. Ethyl Clear 1,000-1, ,000-3, F to +180 F N/A lb bottle * seconds gm tube Surface Insensitive Ethyl Clear Thixo Gel ,000-3, F to +180 F 30 GM gm tube for porous surfaces. seconds TOUGHENED SUPERGLUE ml bullet * Close fitting parts. Ethyl Black , F to +225 F GM oz bottle seconds lb bottle ml bullet * Gap filling. Ethyl Black 3, , F to +180 F N/A gm bottle seconds lb bottle METAL AND RUBBER BONDER oz bottle Metal bonder for Methyl Clear , F to +180 F A-A3097 Type I lb bottle close fitting parts. seconds CL 2 Methyl *Corresponding size not available. See page 18 for Vibra-TITE Accelerators and other surface preparation products. CYANOACRYLATES 15

16 LIGHT CURE ADHESIVES Vibra-TITE Light Cure Adhesives are single part photo-initiated curing acrylates that cure on demand when exposed to UV-light. Benefits: Almost instant cure Some cure with very low intensity Flexible or rigid products available High optical clarity & non-yellowing Bond a wide range of substrates Will not shadow-cure Typical Applications Jewelry-crystal and stone setting Glass ornaments, house-hold objects and more One of the substrates must be clear and transmit UV light Special Note Vibra-TITE Light Cure Adhesives are available in 10 ml and 30 ml syringes if needed. Vibra-TITE Part # Available Loctite Sizes Part # Product Description Cure Type Color Key Substrates Viscosity Brookfield (cp) Elongation Shore At Break (%) Hardness Temperature Fixture Shear Range Time Strength (PSI) Suggested Activator 211 LIGHT CURE ADHESIVE ml bottle Low viscosity glass Ultraviolet/ Clear Glass D F to L bottle bonder. Visible LIGHT CURE ADHESIVE +250 F Seconds ml bottle Medium viscosity Ultraviolet/ Amber Glass 1, F to ml bottle Glass bonder. Visible +250 F Seconds L Bottle LIGHT CURE ADHESIVE ml bottle High viscosity Ultraviolet Clear/ Glass, Metal 9, D F to 1, L bottle Glass bonder. Straw UV STRUCTURAL ADHESIVE +266 F ml bottle Impact resistant UV/ Opaque Glass, Gel 100 D F to L bottle 352 gel. Primer UV STRUCTURAL ADHESIVE Metal +250 F Seconds ml bottle Impact resistant Ultraviolet/ Clear/ Glass, Metal 19, D F to 2, / L bottle adhesive. Heat/ Light +374 F Activator Amber ACRYLIC UV/VISIBLE WITH FLUORESCENCE ml bottle * Medical device Ultraviolet/ Clear to Glass, Metal F to L bottle bonder. Visible Hazy/ Thermoplastic, +300 F Fluorescent Polycarbonate, Polyvinylchloride ACRYLIC UV/VISIBLE WITH FLUORESCENCE ml bottle * Needle bonder. Ultraviolet/ Clear to Metal F to L bottle Visible Hazy/ Thermoplastic, +300 F FluorescentPolyvinylchloride, Polyurethane 250 LIGHT CURE ADHESIVE ml bottle Doming product for Ultraviolet/ Clear Plastics 6, L bottle plastics. Visible 255 LIGHT CURE ADHESIVE ml bottle Doming product for Ultraviolet/ Clear Metals 6, L bottle metals. Visible 294 LIGHT CURE ADHESIVE ml bottle * UV plastics bonder. Ultraviolet/ Clear Plastics 7, D F to L bottle * Visible +188 F Seconds 265 LIGHT CURE ADHESIVE ml bottle Light tacking Ultraviolet/ Clear Glass, F to L bottle adhesive. Visible LIGHT CURE ADHESIVE Plastics +188 F Seconds ml bottle UV/Visible potting Ultraviolet/ Clear Glass, 8, L bottle material. Visible Plastics Seconds *Corresponding size not available. 16 Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite and Loctite is a registered trademark of the Henkel Corporation

17 STRUCTURAL ADHESIVES Structural Adhesives, a Methacrylate technology, are room temperature curing, 2-part, no-mix systems comprised of resin and hardener that form structural bonds on metal, composite, plastic, wood, ceramic & many other substrates. They are ideal for parts where extended open time is needed. Benefits: Kits comprise brush-on initiator and resin (from a syringe) Toughened - high peel strength and impact resistance Very rapid curing Rapid curing High shear strength Good chemical resistance Vibra-TITE Available Loctite Product Color Viscosity (cp) Max Gap Shear Temperature Fixture Time Specific Suggested Part # Sizes Part # Description at 20 RPM (FILL, IN) Strength (PSI) Range Gravity Activator NO-MIX STRUCTURAL ACRYLICS ml bottle Fast cure on close Amber 1, , F to +300 F 30 seconds L Bottle fitting parts NO-MIX STRUCTURAL ACRYLICS ml bottle Severe environment Trans- 20, , F to +300 F 5 minutes L bottle applications. parent Solvent resistant. Dark Brown NO-MIX STRUCTURAL ACRYLICS ml bottle Fast fixturing Trans- 18, , F to +250 F 1 minute L bottle applications. parent Dark Brown NO-MIX STRUCTURAL ACRYLICS mlcartridge * Rough or porous Pale 67, , F to +250 F 5 minutes L bottle surfaces. Yellow NO-MIX STRUCTURAL ACRYLICS ml bottle Fast fixturing Amber 6,500/17, , F to +300 F 1 minute / L Bottle magnet bonder. Thixotropic 274 NO-MIX STRUCTURAL ACRYLICS ml bottle Amber , F to +250 F 1 minute L Bottle Primers, Accelerators & Activators Vibra-TITE Available Loctite Product Color Viscosity Base On-Part Life Dry Time Application Part # Sizes Part # Description (cp) Structural Activator oz bottle * Structural Light 43 Monomer 2 Hrs None Structurals cc bottle * activator. Brown L * Structural Activator L * General structural Light 1.5 Heptane/ 2 Hrs None Structurals activator. Brown Isopropanol Excel Primer N oz bottle * General purpose Clear/ 2 Acetone 30 Days Seconds Anaerobics oz bottle * primer. Green gal can Excel Primer T oz bottle 8 oz bottle * * Fast acting primer. Amber 2 Acetone/ Isopropanol 7 Days Seconds Anaerobics gal can Excel Accelerator oz bottle 4 oz bottle * * Clear 0.4 Heptane 24 Hrs 1 Minute All Cyanoacrylates oz bottle * gal can Excel Accelerator oz bottle 4 oz bottle General purpose accelerator. Clear/ Amber 1 Heptane 1 Minute 1 Minute All Cyanoacrylates oz bottle gal can Excel Accelerator oz bottle 4 oz bottle * * Accelerator for plastics. Clear/ Amber 1 Isopropanol 1 Minute <30 Seconds All Cyanoacrylates oz bottle * gal can Vibra-TITE surface preparation products promote maximum performance of adhesives and sealants. *Corresponding size not available. Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite is a registered trademark of the Henkel Corporation. 17 BONDING PRODUCTS

18 BONDING PRODUCTS Vibra-TITE offers a wide range of bonding products including Epoxies, Hot-melts, Urethane, and MMA s designed to meet a variety of assembly requirements. Ask your sales representative for a complete list of dispensers and mix nozzles. Epoxies Vibra-TITE Available Product Color Viscosity (cp) Max Gap Shear Temperature Fixture Time Specific Part # Sizes Description (FILL, IN) Strength (PSI) Range Gravity 210 UNIQUE SINGLE-USE NO MEASURING EPOXY pk clamshell 2-part Epoxy System Clear 100, Metal to Metal 40 C to 100 C Min pc. bulk in a single-use pack. to 460 Wood to Wood No Mess - No Waste Gray 65 Nylon to Nylon PART EPOXY ml dual cartridge Compare to White 125, F to +300 F 5 minutes ml dual cartridge 3M DP FLEXIBLE TOUGHENED 2-PART EPOXY ml dual cartridge Compare to Amber 8, F to +200 F 240 Minutes ml dual cartridge 3M DP HIGH PEEL / HIGH SHEAR 2-PART EPOXY ml dual cartridge White 25, F to +250 F 120 Minutes ml dual cartridge or Black Hot-melts / Urethane Hot-melts Vibra-TITE Available Product Color Viscosity (cp) Max Gap Strength Temperature Fixture Time Specific Part # Sizes Description at 20 RPM (FILL, IN) Range Gravity 917 PRESSURE SENSITIVE HOT MELT lb brick White 36,000 N/A 12.5 pli -65 F to +200 F N/A F 963 HOT MELT GASKETING COMPOUND lb brick White 36,000 N/A F to +210 F N/A URETHANE oz. Light 7, Typical Values: -40 F to +200 F 90 Minutes oz. Brown Substrate failure L bottle MMA s Vibra-TITE Available Plexus Product Color Viscosity (cp) Max Gap Shear Mix Ratio Temperature Fixture Specific Part # Sizes Product Description at 20 RPM (FILL, IN) Strength (PSI) by Volume Range Time Gravity MMA 5 MINUTE ml * General purpose. Off 100, to 1-40 F to +250 F 5 Minutes 1.1 cartridge White MMA 10 MINUTE ml * High strength. Off 100, to 1-40 F to +250 F 10 Minutes 1.1 cartridge White MMA ml cart. * Flexible. White 150, to 1-40 F to +180 F 12 Minutes ml cart. * *Corresponding size not available. 18 Vibra-TITE TM is a trademark of ND Industries, Inc. Plexus is a registered trademark of Illlinois Tool Works Inc.

19 REACT-A-PACK NEW Introduction! A Complete 2-Part Epoxy System in a Single-Use Pack! React-A-Pack Epoxy is a system that delivers the advantages of a 2-part epoxy adhesive in a single pack. Inside the pack the epoxy resin and hardener are separated by a patented process. When mixed by mashing the hardener and resin together the product becomes a five minute epoxy with the advantage of no mess and the correct mix ratio in every pack. Part # Pack Clamshell Part # Pc. Bulk Great for wire nuts and outdoor electrical applications. Will not run or drip on vertical applications. DriveGrip TM Increases the grip-strength between the fastener head and tool by as much as 700% Works great on household items, furniture and cabinetry. Typical Applications General purpose epoxy bonds plastic, steel, ceramic and wood. Suggested Uses Anti Cam-Out Fluid Use with: Unlimited shelf-life Screwdrivers of all kinds Hex Keys Pliers Vise Grips Channel Locks Open-end & Box-end Wrenches Odorless, non-toxic, non-corrosive Works instantly, won t irritate skin Wipes clean, no staining Works great in applications where fastener heads or drives are worn or damaged. Eliminates tool wear, rounding, and deforming of fasteners. Eliminates the need for specially designed screwdrivers. No Measuring! No Mess! No Waste! Electric: Sealing wire connectors, lawn sprinkler systems, pumps. Auto: Trailer wire connectors. Marine: Loose screws in fiberglass, wire connector seal & vibration proof. Home: General adhesive needs, furniture, loose wallboard hooks & screws, sealing, towel bars, fillet & supports, candle holder sockets. Part # oz. Tube in cello bag for easy display and handling. BENCH PACK5 A must for every tool box! Vibra-TITE Bench Pack 5 is a handy assortment of our most popular threadlockers, a retaining compound and DriveGrip anti cam-out fluid in a light weight clear plastic container. Part #27005 DriveGrip Anti cam-out fluid makes it easy to remove or tighten screws! Vibra-TITE 541 High Strength Retaining Compound COMPARE TO LOCTITE 680 SPECIALTY PRODUCTS Prevents Driver Slippage Reduces Worker Fatigue Prevents Stripped Screws Vibra-TITE 121 Medium, Removable Strength Threadlocker COMPARE TO LOCTITE 242 Vibra-TITE 140 High Strength Threadlocker COMPARE TO LOCTITE 271 Vibra-TITE 150 Wicking Grade, Medium Strength Threadlocker COMPARE TO LOCTITE 290 Call: or visit: or Vibra-TITE TM, BenchPack 5 TM and DriveGrip TM are trademarks of ND Industries, Inc. Loctite and Loctite 242 are registered trademarks of the Henkel Corporation 19

20 Your Formula Supplied in Bulk or Bottle CHEMICAL BLENDING, CUSTOM SERVICES, TOLL BLENDING AND PRIVATE LABELING ND Industries manufactures annually in excess of 1 million pounds of a wide variety of Vibra-TITE Adhesives, Anaerobics, Cyanoacrylates, Epoxies, Urethanes, Ultraviolets, MMA's, Acrylics, and more offering custom service formulation and toll blending to meet specific customers' needs. COMMITTED TO YOU AND YOUR CUSTOMERS Vibra-TITE products can be supplied to suit your specific needs. We are dedicated to providing innovative, affordable products and services. ND Chemical Blending offers services for: Toll Blending Supply (In Bulk or Bottle) of: - Anaerobic Adhesives - Threadlockers - Retaining Compounds - Sealants - Structural Adhesives - Cyanoacrylates - 2 part Epoxies - Urethanes CREATE YOUR OWN UNIQUE BRAND IDENTITY ND Industries manufactures many adhesives and sealants for private label use and can fill, label, and package bottled products to your specifications. ND can also supply bulk materials if your company does not require packaging services. ND provides private labeling services including design and production with quantity requirements substantially lower than our competitors. 20

21 VERSATILE, POWERFUL, COST-CUTTING TECHNOLOGY In the high-tech world of manufacturing, tolerances are tight and specifications are rigid. Consequently, locking, sealing, bonding, and assembly related products and processes designed to meet these requirements are generally associated with high cost, and in many cases, slow response times. As a vertically integrated supplier ND Industries provides cost effective, highly responsive alternatives to products and services from companies such as Loctite, 3M, and others. ND s specialized team of chemists are second to none. They are hard at work developing customized applications to meet individual customer's needs. ND Industries provides top quality fastening and assembly related products and services, specializing in threadlockers, sealants, anaerobics, lubricants, adhesives and more to a wide range of industries including automotive, electronics, aerospace, marine, construction,and appliance. Our engineering and chemical research capabilities, along with a strong emphasis on individualized problem solving, constantly lead us to the development of the most cutting-edge original technologies. That means new products with improved results. A VERTICALLY INTEGRATED SUPPLIER This means we do it all from top to bottom; we re a one-stop source providing design engineering, custom chemical formulations and distribution. Our in-house capabilities help us fulfill multiple functions for our customers and, at the same time, keep our overhead low. This allows us to provide high quality products and services at costs generally lower than our competitors. TECHNOLOGY AND SERVICES ND Industries is ISO certified. Call: or visit: or Vibra-TITE TM is a trademark of ND Industries, Inc. Loctite is a registered trademark of the Henkel Corporation, 3M is a registered trademark of Minnesota Mining and Manufacturing Co. 21

22 INERT LOCKING ND's service centers can Pre-Apply ND products on ND-supplied fasteners or on fasteners that you supply. ND s service centers are tooled with state-of-the-art fastener processing equipment to provide quality products and rapid distribution. ONE OF THE INDUSTRY S BROADEST PRODUCT LINES ND offers a wide range of fastening and assembly related products and processes that exhibit one or more of the following characteristics: Locking Re-Useability Noise & Vibration Reduction Sealing Cushioning Minimize Galling/Stripping Bonding Insulating Masking Lubricating Identification Temporary Retention ND categorizes its products by their physical properties: Inert Coatings, Reactive Coatings, Formed Products, and Special Products. ND also offers customized formulations for your unique fastening and assembly needs. With its growing family of fastening and assembly products and services, ND meets or exceeds many of the rigorous standards established by the automotive, aerospace, and defense industries. ND STRIP, ND PELL-IT, SOFT TOUCH TIP PELL-IT, SURE TEMP ND inserts are offered in Nylon, KEL-F or VESPEL which ND automatically inserts into a fastener, making it self-locking and selfsealing, yet fully adjustable. REACTIVE LOCKING ND PATCH & RING PATCH TM ND Patch products make threaded fasteners self-locking and selfsealing, while leaving them fully adjustable. Compare to Tuf-Lok.. VIBRA-TITE VC-3 ORIGINAL TM Vibra-TITE VC-3 Original is not an anaerobic or an adhesive. It is a unique blend of acrylic resins that makes any threaded fastener selflocking and self-sealing, while remaining service removable. Customers Served: DAIMLERCHRYSLER GENERAL MOTORS FORD MOTOR COMPANY BOEING LOCKHEED MARTIN JOHN DEERE MACK TRUCK CUMMINS ENGINE VOLKSWAGEN ADVANCED SEALING Accreditation: QS 9000 Registered ISO 9002 Registered ISO17025 Registered AS 9000 Registered QPL Listed QSLM Registered Member Industrial Fasteners Institute EPOXY-LOCK ND Epoxy-Lock locking/ sealing adhesive which is pre-applied to either male or female threaded fasteners. Though the adhesive surface is dry to the touch, the forces of engagement initiate a chemical reaction. ND MICROSPHERES is a powerful ND Microspheres is offered in acrylic and epoxy formulations, available in pre-applied or in bulk for application by other fastener coater/converters. Compare to 3M Scotch-Grip, Loctite Dri- Loc, & omnitechnik PreCoat. EXPAND-A-SEAL ES0105 Expand-A-Seal ES0105 is an original 2-in-1 application and the most effective way to simultaneously lock and bond fasteners and seal against all air and fluid leakage. ST-3 ND PLASTISOL APPLIED-TO-METAL ND PLASTISOL OPEN MOLD ND MASTICS & EXPANDABLES ST-3 is designed to be applied by ND or on the customer s automated band coating equipment or tumble coater. Compare to 3M Scotch- Grip 4291, and Loctite Vibra- Seal 516, 517, 503, and 503H. MASKING & LUBRICATING ND Plastisol Applied-To-metal provides a positive seal that eliminates leaks. It is available in a wide variety of durometers and colors. ND Plastisol Open-Mold are parts made of moldable PVC materials that can seal, trim, cushion, insulate and control noise and vibration often at a fraction of the cost of die cutting and injection molding. Crushable mastics evenly fill and seal all voids and are applied by the assembler. Heat causes the material in Expandables to expand and adhere to metal, creating a seal while filling in the gaps. ASSEMBLE EZ FORM RINGS Form Rings are mashable polyamide rings for sealing threaded and unthreaded fasteners. Form Rings are ideal for on-thejob applications to a wide variety of nails, screws, bolts, and rivets. ND ANTI-SEIZE 907 TM ND Anti-Seize compounds are formulated to prevent seizing, galling, pitting and excessive wear and corrosion. ND Anti-Seize will not wash, squeeze or burn out. 22 LM-1293 ND EZ DRIVE 200 ND STAY-PUT ND COLOR CODE TM An automotive approved process, ND LM-1293 is a Teflon-type fastener coating that lubricates and prevents undesirable substances from adhering to fastener threads. Compare to Nycote. ND EZ Drive 200 is an ergonomic assembly aid designed to increase installation efficiency by reducing friction by as much as 75%. ND Stay-Put provides temporary, dependable retention for fasteners or other components prior to and during the assembly process. Whether your need is to identify some special characteristics or to color match a fastener head to a mating surface, ND is your source for color identification.

23 ND Pre-Applied Process ND Pre-Applied Product / Industry Cross Reference Chart Compare To ND Epoxy-Lock... COMPARE TO... 3M Scotch-Grip, Loctite Dri-Loc, PRECOTE 80 ND Microspheres 593-S... COMPARE TO... 3M Scotch-Grip 2353 & 4844 ND Microspheres 1193-S... COMPARE TO... 3M Scotch-Grip 2451 & 2510 ND Microspheres TA COMPARE TO... PRECOTE 30 ND Microspheres TA COMPARE TO... PRECOTE 80 ND Microspheres TA COMPARE TO... PRECOTE 85 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 200 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 200 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 201 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 201 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 202 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 202 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 203 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 203 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 204 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 204 ND Microspheres AA COMPARE TO... Loctite Dri-Loc STS ND Microspheres AA COMPARE TO... Loctite Dri-Loc STS ND Microspheres AA COMPARE TO... Loctite Dri-Loc 211 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 211 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 218 ND Microspheres AA COMPARE TO... Loctite Dri-Loc 218 ND ST-3-W... COMPARE TO... 3M Scotch-Grip 4291 ND ST-3-L3... COMPARE TO... 3M Scotch-Grip 4291 ND ST-3-L4... COMPARE TO... Omni TECHNIK PRECOTE 5 ND ST-3-L5... COMPARE TO... Loctite Vibra Seal 503 ND ST-3-L5A... COMPARE TO... Loctite Vibra Seal 503HV ND ST-3-L6... COMPARE TO... Loctite Vibra Seal 516 ND ST-3-L7... COMPARE TO... Loctite Vibra Seal 517 ND ST-3-L8... COMPARE TO... Loctite Vibra Seal 503 mod ND ST-3-L8A... COMPARE TO... Loctite Vibra Seal 503 HVmod ND ST-3-L10... COMPARE TO... Loctite Vibra Seal 517 mod ND ST-3-L11... COMPARE TO... Loctite Dri-Seal 506 ND ST-3-L13... COMPARE TO... Loctite Dri-Seal 513 Call: or visit: Epoxy-Lock ND Microspheres Epoxy Type ND Microspheres TA Series ND Microspheres Acrylic Series ST-3 Masking / Lubricating 3M & Scotch-Grip are registered trademarks of the Minnesota Mining & Manufacturing Company. Loctite, Dri-Loc and Vibra-Seal are registered trademarks of Henkel Corporation. PRECOTE is a registered trademark of PRECOTE USA. ND and ND Industries are registered trademarks of ND Industries, Inc. 23

24 A Trademark of ND Industries ND Vibra-TITE Divisions Orders in USA: ND Division #19 Sanford, Florida PH: FX: Orders outside USA: ND Division #10 Troy, Michigan PH: FX: Orders in Mainland China: ND Adhesive Technology (Shanghai) Co., Ltd Jiading District, Shanghai PH: FX: ND Western Fastener Processing Division Santa Fe Springs, California ND Southwestern Fastener Processing Division Arlington, Texas ND Midwestern Fastener Processing Division/Chicago Northbrook, Illinois Rockford, Illinois ND Midwestern Fastener Processing Division/Detroit Clawson, Michigan ND Midwestern Fastener Processing Division/Cleveland Twinsburg, Ohio ND Southeastern Fastener Processing Division Charlotte, North Carolina ND Eastern Fastener Processing Division Oakland, New Jersey ND Industries Asia, Inc./Taiwan Fastener Processing Division Kaoshiung, Taiwan R.O.C. ND Electronics (Kunshan) Co., Ltd. Fastener Processing Division Kunshan City, China Corporate Offices 1000 North Crooks Road Clawson, Michigan USA Phone: Fax: Visit our web site at