Aluminium hinges Aluminium hinges Further materials and surface finishes on demand. We will be pleased to give you advice.
|
|
- Erika Ferguson
- 5 years ago
- Views:
Transcription
1 Aluminium s Art.:6087 Art.:6023 Art.:6022 Art.: Art.: Art.:6876 Art.: 6088 Art.: 6872 Art.: 6871 Art.: Art.: Art.: Art.: Art.: F-121
2 Aluminium piano rolled Art.no. Dimensions in mm Rod Pin A B C D Pin Ø Aluminium Steel ,6 2, Aluminium Steel , Aluminium Aluminium Aluminium Aluminium , Aluminium Aluminium , Aluminium Aluminium , Aluminium Aluminium , Aluminium Aluminium Alu 5754 Aluminium E Aluminium profile Width 50 Art no. Rod Pin A B C Dimensions in mm D Pin Ø Alu 6060 T5 Stainless steel ,2 35,5 E On request s can be delivered in different length. execution drilled on request. F-122
3 Aluminium profile Art no. Dimensions in mm Rod Pin A B C D Pin Ø Alu 6082 T5 Stainless steel ,75 1,3 2,2 12, Alu 6082 T5 Stainless steel ,75 1,3 2,2 12, Alu 6082 T5 Stainless steel ,45 1,3 2,2 12, Alu 6082 T5 Stainless steel ,45 1,3 2,2 12, Alu 6082 T5 Stainless steel ,5 1,3 2,2 12, Alu 6082 T5 Stainless steel ,5 1,3 2,2 12,7 E On request s can be delivered in different length. drilled on request. Aluminium profile with double joint Opening angle 180 (must be ordered separately) Art no. Dimension in mm Rod Pin A B D Pin Ø Alu 6060 T5 Stainless steel Alu 6060 T5 Stainless steel Alu 6060 T5 Stainless steel Sealing for s with double joint Art no. Dimension in mm A 6853.D Rubber black D Rubber black D Rubber black 3000 F-123
4 Art.Nr (drilled and countersunk) Cantilevered Aluminium 6060 T5 Silver Black without plug with plug Art no.6872/6873 Also available: Cantilever see chapter F-41 Torque see chapter F-71 Rest torque see chapter F-76 Aluminium 6060 T5 Silver Black Spring force in N.m Opening ,23 0,45 0, Closing ,23 0,45 0, Opening ,12 0,24 0, Closing ,12 0,24 0, Opening ,9 1,1 1, Closing ,9 1,1 1,3 Art.Nr.:6874(gelocht und gesenkt) Rest torque Rest positions all 30 from 0 to 270. With 3 different detent moments available. Black Alu 6060 T5 Detent moment ,8 N.m ,5 N.m ,2 N.m ,0 N.m F-124
5 Art.no.:6871(perforated and countersunk) Torque Holding torque: 0-5 N.m max. Adjusting screw: internal hex 4 Temperature stability: -20 C bis + 80 C Max. tensile strength : Max. shear strength: 6000 N 5000 N Colorless Black Alu 6060 T5 Alu 6060 T Art.no.:6871(perforated and countersunk) Torque Holding torque: 0-5 N.m max. Adjusting screw: internal hex 4 Temperature stability: -20 C bis + 80 C Max. tensile strength : Max. shear strength: 6000 N 5000 N Raw Black Alu 6060 T5 Alu 6060 T Art.no (drilled and countersunk) with spring and intermediate ring made of nylon Right (.06) The moves itself automatically back to the initial position with an opening angle of up to 80. Above 80 the spring function is cancelled. The left execution (.05) is a mirror image to the right execution (.06). Left Right Aluminium 6060 T5 Dimensions in mm A B C D E Ø F G I (Silver) , ,5-10,4 38 9, (Black) , ,5-10,4 38 9,5 F-125
6 Art.no (drilled and countersunk) Cantilevered Aluminium 6060 T5 Silver Black Art.no (drilled and countersunk) Aluminium 6060 T5 Silver Black Spring force in N.m ,4 3,1 3, ,4 3,1 3,8 Art.no (drilled and countersunk) Soft-closing torque Opens and closes steamed. Function ensures to 115 Torque per couple: 2,5 to 4,5 N.m Anodized colorless Aluminium 6060 T F-126
7 Art no.:6960 (perforated and countersunk) Spring Colorless Black Alu 6060 T5 Alu 6060 T5 Spring force in N.m ,2 0,12 0,07 Art no.:6871(perforated and countersunk) Adjusting screw: internal hex 2,5 Temperature stability: -20 C to + 80 C Max. tensile strength : Max. shear strength: 2240 N 1050 N Raw Colorless Black Alu 6060 T5 Alu 6060 T5 Alu 6060 T art.no.:6871 (perforated and countersunk) Detent positions all 30 from 0 to 270 Detent moment is not adjustable. Anodized Anodized colorless black Alu 6060 T5 Alu 6060 T F-127
8 Art no (spring force adjustable) Aluminium Anodized for 2 s Load in kg for 3 s Silver Gold Bronce White Black This product will be delivered only in pairs. Close doors automatically, Integrated mechanic is very tough and adjustable. Max. aperture angle 180. Art no (spring force adjustable) Aluminium Anodized for 2 Load in kg for Silver Gold Bronce White Black This product will be delivered only in pairs. Close doors automatically, Integrated mechanic is very tough and adjustable. Max. aperture angle 180. F-128
9 Art no (spring force adjustable) Double joint /swing door Load in kg Aluminium Anodized for 2 for Silver Gold Bronce White Black This product will be delivered only in pairs. Close doors automatically Integrated mechanic is very tough and adjustable. Max. aperture angle 180. art no (spring force adjustable) double joint /swing door Aluminium Anodized for 2 Load in kg for Silver Gold Bronce White Black This product will be delivered only in pairs. Close doors automatically, Integrated mechanic is very tough and adjustable. Max. aperture angle 180. F-129
10 Art no (spring force adjustable) Aluminium Anodized for 2 Load in kg for Silver Gold Bronce White Black This product will be delivered. Close doors automatically, Integrated mechanic is very tough and adjustable. Max. aperuture angle 180. Art no (spring force adjustable) Aluminium Anodized Silver Gold Bronce White Black This product will be delivered only in pairs. Close doors automatically, Integrated mechanic is very tough adjustable. Max. aperture angle 180. F-130
11 Rest in aluminium (.01) Art.no: 6085 (perforated and countersunk) with fixed, Zinc plated steel bolt and nylon coating Pin diameter 8mm. Aluminium Left Right Anodized (.01) Art.no: 6086 (perforated and countersunk) with fixed, Zinc plated steel bolt and nylon coating Pin diameter 8mm. Aluminium Left Right Anodized Art.no: 6087 (perforated and countersunk) with fixed, Zinc plated steel bolt and nylon coating (.02) Pin diameter 9mm. Aluminium Left Right Anodized F-131
12 Weld on -rolls ABR with round ends FVS with fixed stainless steel pin and brass intermediate ring. AVS with extractable stainless steel pin and brass intermediate ring. L Aluminium Dimensions in mm D B d Load capacity ca. in kg ABR 60 FVS AVS ABR 80 FVS AVS ABR 100 FVS ABR 120 FVS AVS ABR 150 FVS , ABR 180 FVS , Art.no.:6022 with riveted stainless steel pin; drilling on request Raw Aluminium Dimension in mm L B C Ø D E F f G S , , , ,2 Pin Ø Art.no.:6023 with riveted stainless steel pin; drilling on request Raw Aluminium Dimension in mm L B D E S , ,2 Pin Ø F-132
Phone: +49 (0) 231 / Fax: +49 (0) 231 / Spring hinges. Art.: 6164 Art.
hinges Art.: 6062 Art.: 6063 Art.: 6064 Art.: 6065 Art.: 6066 Art.: 6067 Art.: 6068 Art.: 6164 Art.: 6165 Art.: 6166 Art.: 6105 Art.: 6169 Art.: 6167 Art.: 6486 Art.: 6088 Art.: 6872 Art.: 6876 F-41 hinges
More informationConcealed hinges. Art.: Art.: Art.:6103 Art.:6127. Art.:6589 Art.:6128 Art.:
Concealed hinges Art.:6069.05 Art.:6069.04 Art.:6103 Art.:6127 Art.:6589 Art.:6128 Art.:6069.09 Art.:6069.14 Art.:6069.00 Art.:6588 Art.:6100 Art.:6075, F-81 Ordering example: Art.no 6001 01/02. 04/30
More informationConnectors. Multi-purpose connecting clamps. Stainless steel cross connectors
Connectors Multi-purpose connecting clamps Thread in lower part With mushroom head bolt and protection against twisting Art. No. Design Pack / Weight 100147 Galvanised steel, 2-part, round/round 100149
More informationUniversal frame fixing SXR-T
The all-round solution with short drill hole depth. VERSIONS APPROVALS zinc-plated steel stainless steel BUILDING MATERIALS Approved for: Concrete C12/15 Vertically perforated brick Hollow blocks made
More informationFrame fixing SXS-F US
The high-performance frame fixing with SX-technology VERSIONS APPROVALS zinc-plated steel stainless steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60 Three-layer composite exterior wall
More informationThe high-performance frame fixing with SX-technology VERSIONS. zinc-plated steel stainless steel BUILDING MATERIALS
-T The high-performance frame fixing with SX-technology VERSIONS APPROVALS zinc-plated steel stainless steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60 Three-layer composite exterior wall
More informationR10 Set No: 1. Design of Machine Members-I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 ''' ' '' '' ''
R10 Set No: 1 III B.Tech. I Semester Supplementary Examinations, June/July - 2014 Design of Machine Members-I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 Answer any FIVE Questions All Questions
More informationEngineered Parts Your Design Our Competence
Engineered Parts Your Design Our Competence Engineered Parts by Bossard Your Design Our Competence Competent Partner Proven Quality Highest Supply Reliability Optimum Price-Performance-Ratio Competent
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationManual Actuator. S / SR / SP Levers. Type Series Booklet
Manual Actuator S / SR / SP Type Series Booklet Legal information/copyright Type Series Booklet S / SR / SP All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA FEATURES GENERAL APPLICATIONS
TECHNICAL DATA Nominal diameter: DN 50 - DN 1200 Metallically up to DN 800 max. PN 16 Face-to-face: EN 558 Series 20, optional Series 25 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092
More informationmin. 50min. 65min. PIT / P3 / P4 Ø
Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange
More informationPRODUCT DATA SHEET SAFETY BOLT
S SK B S A4 SK A4 B A4 PRODUCT DATA SHEET SAFETY BOLT LEGENDARY TWIN-CONE HEAVY DUTY ANCHOR FOR HI-POWER PERFORMANCE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 Legendary twin-cone heavy
More informationFixings, bonds and clamps
Square tape clamp Material 25 x 3mm Copper 0.12kg CT105-H 25 x 6mm Copper 0.30kg CT110-H 50 x 6mm Copper 0.60kg CT115-H Manufactured from high quality copper and aluminium alloys. Simple to install, providing
More informationSECTION METAL EQUIPMENT LOCKERS
SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationZinc-plated steel Stainless steel Hot-dip galvanised steel BUILDING MATERIALS
The all-round solution with short drill hole ADVANTAGES The special functioning allows for use in solid and hollow building materials with an anchorage of just 0 mm, ensuring an economical fixing. The
More informationINDEX. 1. DuoTec. Product Information. 2. Market Offering. 3. DuoTec Advantages. 4. Product Range & Packaging. 5. Technical Data
INDEX 1. DuoTec. Product Information 2. Market Offering 3. DuoTec Advantages 4. Product Range & Packaging 5. Technical Data 1. Product Information The innovate toggle bolt for heavy loads in all types
More informationcase carts
case carts 05 81 81 CASE CARTS RGAE 82-84 CASE CARTS RGAE FOR ISO-TRAYS 85-86 CASE CARTS RG 87 CASE CARTS RGEE 88-89 SPECIAL EQUIPMENT AND ACCESSORIES 90 CUSTOMIZED SOLUTIONS 91-92 shuttle-system see chapter
More informationULTRAPLUS M12-M36. The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads.
ULTRAPLUS M12-M36 The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads. FUNCTION When the anchor is installed the expansion segments are
More informationSECTION METAL STUDENT LOCKERS
SECTION 10 51 13 - METAL STUDENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES 1. DESCRIPTION: Furnish and install Heavy-Duty Ventilated (HDV) ELITE Metal Lockers, complete, as shown and specified per contract
More informationSafety Ladders: Made of Aluminium
Y-Spar Anodized aluminium alloy ladder. Guide-rail profile: 52 x 51 mm. Comes with joint plate. Mounting brackets extra to order. Mounting distance: recommended 1400 mm - max. 1680 mm. Installation of
More informationDiaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationCode No: R Set No. 1
Code No: R05310305 Set No. 1 III B.Tech I Semester Regular Examinations, November 2007 DESIGN OF MACHINE MEMBERS-I ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks:
More informationContents. The Range The Finishes Application...09
MARINE HARDWARE Contents The Range...03 The Finishes...08 Application...09 The Range HINGES The prime application of the hinge is for in cabin use; however, they can also be used for some alternative applications
More informationDIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
More informationANCHORS Mechanical & Chemical Anchoring
ANCHORS Mechanical & Chemical Anchoring Click to start MASONRY & PLASTERBOARD ANCHORS MASONRY ANCHORS CAVITY WALL ANCHORS CHEMICAL ANCHORS PA TOOLS & ACCESSORIES MASONRY ANCHORS Ramset has been offering
More informationMetal Stock Identification
Metal Work Description Metal is produced in many different types, shapes, and forms. This activity plan provides examples of stock forms that might be found in a metal shop. Many of these shapes are common
More informationJayant Impex Private Limited
+91-8042909029 Jayant Impex Private Limited https://www.jayantferro.com/ We are among leading trader, importer and Supplier Pipe Fittings & Bars product. The offered range of products is best known for
More informationSECTION METAL ATHLETIC LOCKERS
SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationBULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
More informationULTRAPLUS M12-M36. The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads.
ULTRAPLUS M12-M36 LIEBIG The ORIGINAL Anchoring Technology The undercut anchor for exceptionally high loads in cracked and non-cracked concrete also for shock and seismic loads. FUNCTION When the anchor
More informationThe designs, depending upon the methods used, may be classified as follows:
Definition Machine Design is the creation of new and better machines and improving the existing ones. A new or better machine is one which is more economical in the overall cost of production and operation.
More informationMIGUTAN. Installation instructions. MIGUTAN-Systems with short AAS sheets
Installation instructions MIGUTAN-Systems with short AAS sheets 1.1 General Information MIGUTAN systems will be fabricated according to a site measurement to ensure perfect fit. The metal parts will be
More informationDUOline. The innovative product line with. More functions More performance More security NEW. fischer DUO - Line. More power, more intelligence
DUOline The innovative product line with More functions More performance More security fischer DUO - Line More power, more intelligence NEW DUO-Line Intelligent combinations for more power and intelligence.
More informationP600 Pressure Regulator
P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
More informationSINGLE ANCHOR USE FOR NON-CRACKED CONCRETE
LA+ LAL+ PRODUCT DATA SHEET DROP IN ANCHORS SINGLE ANCHOR USE FOR NON-CRACKED CONCRETE www.sormat.com facebook.com/sormat youtube.com/sormatfixing 1 ETA-approved drop in anchors ideal for suspension systems
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationBOSHART INDUSTRIES Telephone: Toll Free: Fax:
0- Available in cast bronze or cast brass body and poppet NBR "O"-Ring Seal (Nitrile Buna-N) BRONZE OR BRASS CHECK VALVE BRONZE 7CV050 7CV075 7CV00 7CV25 7CV50 7CV200 7CV300 7CV400 9.34 2.88 8.26 28.62
More informationHardware Fitting Accessories Entrance Door Fittings
Letter plate StarTec Bell push StarTec, letter plate with spring Stainless steel matt (304) 986..0 Brass polished PVD 986..015 Stainless steel matt (304) 986..040 Stainless steel brass plated polished
More informationAKS Bird Control Systems
AKS Bird Control Systems 2018 Astrid K. Schulz GmbH & Co. Handelsgesellschaft KG Weinbergstraße 42 D-74360 Ilsfeld-Auenstein Germany Phone +49-70 62-6 34 50 Fax +49-70 62-6 44 99 E-Mail info@aks-schulz.de
More informationSTABILO. System Parts Facade Scaffold. Vertical Frame (Steel) Vertical Frame (Aluminium) Vertical Frame. Vertical Frame (Aluminium) (Steel)
STABILO STABILO ø 48.3 x 4.0 mm Weight kg 6,0 14,0 19,0 Art.-No. 700193 700186 700179 Vario Equipped with exchangeable stabilizer Weight kg 3,5 6,0 8,0 Art.-No. 700223 700216 700209 Vario ø 48.3 x 4.0
More informationHALLOWELL FORT KNOX Modular Utility Storage and Workbench System Specifications
General: All modular components shall be "FORT KNOX Modular Utility Storage and Workbench System" components as manufactured by Hallowell or approved equal. All workbench pedestals, cabinets and lockers
More information(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI)
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) 4021 : Specification for teak wood. 287 : Recommendation for maximum permissible moisture content 1141 : Specification for code
More informationDUBO retaining rings for socket head screws. DUBO toothed collar rings. KORREX protective caps for socket head screws. KORREX insulating bushes type I
DUBO retaining rings 10 10 DUBO retaining rings for socket head screws 11 DUBO toothed collar rings 15 KORREX nut caps 22 DUBO WORLDWIDE KORREX round nut caps KORREX snapcaps 24 17 KORREX protective caps
More informationPermissible loads of a single anchor in cracked normal concrete (concrete tension zone) of strength class C20/25 ( B25) Permissible tensile load
Injection system FIS VL: Injection mortar FIS VL with Threaded rod FIS A zinc plated steel / stainless steel 1 loads of a single anchor in cracked normal concrete (concrete tension zone) of strength class
More informationFINGERSTOCK GASKETS. Physical Characteristics. Specific weight: 8.4g/cm 3 Melting point: 900 C Coefficient to expansion:
FINGERSTOCK GASKETS Application Due to their outstanding material and electrical characteristics, beryllium copper finger of different shapes and dimension are used in the following industries: Broadcasting,
More informationSENG H SENG UA UA I T N I DUSTRIE DUSTRIE PT PT E L TD w w w.se .se gh gh at u.c at om
成發工業私人有限公司 SENG HUAT INDUSTRIES PTE LTD www.senghuat.com STAINLESS STEEL Stainless steel are iron alloys with other alloying elements added to enhance its structure and properties such as formability strength
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationKnot Wheel Brushes WHEEL BRUSHES
W HE E L B RU S H E S 4 5 Knot Wheel Brushes Knot Wheel Brushes Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds.
More informationIndex. Clawbolt Anchor Tygabolt Anchor. Xbolt Anchor. Dropin Anchor & Tool. Nail-in Anchor Suspension Anchor
Index Clawbolt Anchor Tygabolt Anchor Xbolt Anchor Dropin Anchor & Tool Nail-in Anchor Suspension Anchor Pantha Plug PVC Wall Plug Wedge Anchor B Wedge Anchor BZ Plus Wedge Anchor BZ-IG & Setting Tool
More informationSTAINLESS STEEL. General Information
General Information General Information GROUPS AND GRADES OF STAINLESS S In ISO 3506, reference is made to steel grades A1 to A5, C1 to C4 and F1, covering steels of the following groups: - Austenitic
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationMATERIALS AND TECHNOLOGY
S56 Coimisiún na Scrúduithe Stáit State Examinations Commission JUNIOR CERTIFICATE EXAMINATION, 2006 MATERIALS AND TECHNOLOGY METALWORK - ORDINARY LEVEL 100 Marks Tuesday, 20 June, Afternoon, 00 to 30
More informationInstallation. Natrix
Installation Natrix Table of Contents 1 Prerequisites for Installation Site... 2 1.1 On-site Delivery and Insertion at Ground Level... 2 1.2 On-site Delivery and Insertion via Ramp... 2 1.3 Intermediate
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationANDERSON GREENWOOD H1 HAND VALVES
Large bore, ⅜ (9.5 mm) diameter orifice, general purpose soft-seated hand valve for pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION A general purpose, soft-seated hand valve designed for
More informationTHE BOLTLESS CONSTRUCTION SYSTEM
www.eztube.com 1.800.833.2522 THE BOLTLESS CONSTRUCTION SYSTEM The E-Z TUBE BOLTLESS CONSTRUCTION SYSTEM is a versatile, light duty construction system that offers a cost effective and simple method of
More informationInjection Adhesive VM-PY
Cartridge VM-PY 410 Coaxial cartridge Content: 410ml Range of loading: 0,3 kn - 39,4 kn Concrete quality: C20/25 - C50/60 Masonry: Solid brick, Hollow block Description The Injection Adhesive is a polyester-resin
More informationModular Scaffolding MEKA 48
Modular Scaffolding MEKA 48 MODULAR SCAFFOLDING MEKA 48 MODULAR SCAFFOLDING The Modular Scaffolding MEKA 48 is designed to adapt to the most complex scaffold structures. Its versatility offers a wide range
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 23 05 16 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationPRODUCT EVALUATION Effective Date: June 1, 2013 GDR-40
TEXAS DEPARTMENT OF INSURANCE Engineering Services Program / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 PRODUCT EVALUATION Effective
More informationSECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationCast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE
Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationThe following excerpt are pages from the North American Anchor Fastening Technical Guide, 2011.
The following excerpt are pages from the North American Fastening Technical Guide, 2011. Contact Hilti s team of technical support specialists between the hours of 7:00am 6:00pm CST for complete details
More informationCAPACITOR DISCHARGE (CD) WELD STUDS & STUD WELDING EQUIPMENT
CAPACITOR DISCHARGE (CD) WELD STUDS & STUD WELDING EQUIPMENT THE WELDING PROCESS THE CAPACITOR DISCHARGE (CD) STUDWELDING PROCESS CD Studwelding is generally used to weld smaller diameter studs to thin
More informationDOORS/HATCHES DOORS/HATCHES LET US KNOW YOUR REQUIREMENTS WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS PHONE FAX
DOORS/HATCHES WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS LET US KNOW YOUR REQUIREMENTS 7 #00 -DOG FUMELIGHT DOOR #0 4-DOG WEATHERTIGHT DOOR #0 6-DOG WATERTIGHT DOOR #0 6-DOG SQUARE CORNER DOOR #04 6-DOG
More informationUSER S MANUAL HAKI UNIVERSAL
USER S MANUAL HAKI UNIVERSAL Suspended scaffolding HAKI AB 2012 Important information HAKI s product liability and erection instructions apply only to scaffolds that are entirely composed of components
More informationfischer Test Report Fixing Tests for Multi-Core block
fischer Test Report Fixing Tests for Multi-Core block Testing on Topcrete Multicore Block 1.Contents 2.Test Parameters 3. Fixing products tested 3.1 FIS 3.5V 360 S Injection Resin and FIS 18X85 N with
More informationDate of update January 25, 2018 Valid until
CERTIFICATE PRODUCT APPLICATION VTT-C-4805-09 Date of update January 25, 2018 Valid until 12.10.2020 U Protect fire insulation solutions for ventilation ducts MANUFACTURER Saint-Gobain Finland Oy / ISOVER
More informationSIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD
BLS BLS-P BLS A4 SD ILS LPA A4 PRODUCT DATA SHEET SUPERPLUS UNDERCUT ANCHORS SIMPLY THE BEST HEAVY DUTY SELF-UNDERCUTTING ANCHOR IN THE WORLD www.sormat.com facebook.com/sormat youtube.com/sormatfixing
More informationDUOline. The innovative product line with. More functions More performance More security. fischer DUO - Line NEW. More power, more intelligence
DUOline The innovative product line with More functions More performance More security fischer DUO - Line More power, more intelligence NEW DUO-Line Intelligent combinations for more power and intelligence.
More informationEccentric style, round ported plug valves F580 - valve sizes DN F583 - valve sizes DN
Eccentric style, round ported plug valves F80 - valve sizes DN 80-0 F83 - valve sizes DN 10-600 Features The resilient plug provides tight shut-off without sealing lubricants. The plug valve utilizes a
More informationSECTION DETENTION WINDOW SCREENS. 1. Detention screens for interior and exterior installations at exterior windows in existing buildings.
SECTION 08 56 66 DETENTION WINDOW SCREENS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: SPEC
More informationStandard Tube & Pipe Adapters
Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10,
More informationTECHNICAL SPECIFICATION FOR. 20' x 8' x 8'6" ISO 1CC TYPE STEEL DRY CARGO CONTAINER WITH
TECHNICAL SPECIFICATION FOR 20' x 8' x 8'6" ISO 1CC TYPE STEEL DRY CARGO CONTAINER WITH CORTEN STEEL CONSTRUCTION, CORRUGATED DOOR, CORRUGATED ROOF, 1 PAIR OF FORKLIFT POCKET, 2 VENTILATORS & PLYWOOD FLOOR
More informationPRODUCT APPLICATION MANUFACTURER INTRODUCTION CERTIFICATION PROCEDURE. Date of update April 6, 2018 Valid until
CERTIFICATE VTT-C-12188-17 Date of update April 6, 2018 Valid until 6.12.2022 PRODUCT APPLICATION CONLIT insulation solutions for ventilation ducts MANUFACTURER Rockwool Finland Oy P.O. Box 78 FI-01511
More informationAdjustable Suspension Hanger Technical Datasheet
Adjustable Suspension Hanger sheet The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through
More informationTHE NEW GENERATION OF RETRACTABLE PERGOLAS AND ROOF SYSTEMS SITE SPECIFIC ARCHITECTURAL MODELS. Suntech Architectural Solutions
THE NEW GENERATION OF RETRACTABLE PERGOLAS AND ROOF SYSTEMS SITE SPECIFIC ARCHITECTURAL MODELS Suntech Architectural Solutions SITE SPECIFIC ARCHITECTURAL MODELS The Suntech range of site specific architectural
More informationRAPID Column Formwork For the highest requirements on concrete surfaces and edge formation. Product Brochure Issue 10/2017
For the highest requirements on concrete surfaces and edge formation Product Brochure Issue 10/2017 Content System advantages 5 For the highest requirements on concrete surfaces and edge formation 8 For
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationKeystone Figure 412/418 Butterfly valve handles
Keystone Figure 412/418 Butterfly valve handles Leverlock and continuous adjustable handles for butterfly valves requiring manual operation Features Long life - Robust construction in a variety of corrosion
More informationB5B SERIES CRL SMOKE BAFFLE SYSTEMS
NET SIZE 15/16" B5B SERIES CRL CRL ARE DESIGNED TO PROVIDE AN ALMOST INVISIBLE TEMPERED SMOKE CURTAIN. MANY OF TODAY'S FIRE CODES REQUIRE LARGE OFFICES OR RETAIL AREAS TO BE BROKEN DOWN INTO SMALLER, MORE
More informationForged Eye Bolts. Working Load Limit (lbs.)* Weight Per 100 (lbs.)
Forged Eye Bolts G-291 Para Español: www.thecrosbygroup.com SEE APPLICATION AND WARNING INFORMATION On Page 180-181 Forged Steel - Quenched and Tempered. Fatigue rated at 1-1/2 times the Load at 20,000
More informationProduct Catalogue. RechnungsMaster für Windows
Product Catalogue 208 Product Catalogue 208 Aluminium - hood container - on aluminium pallet Delta D22.0 outer dimension: W/D/H 50 x 800 x 050 mm inner dimension: W/D/H 00x720x000 mm coated Aluminium -
More informationPipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More
Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products
More informationKeuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes.
SECTION 05 73 16 {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes. PART 1 GENERAL 1.1 SUMMARY A. Section includes cable railing system, with architectural metal
More informationSilver brazing alloys and fluxes PRODUCT GUIDE
Silver brazing alloys and fluxes PRODUCT GUIDE UNIVERSAL SILVER ALLOYS CADMIUM FREE Silver alloy Composition % Melting Operating Tensile International norms Density range temp. strength Ag Cu Zn Other
More informationCompact Trunnion Mounted Side Entry Ball Valves
Compact Trunnion Mounted Side Entry Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers
More informationBAUMANN SPRINGS Springs and Stampings for the World.
Welcome BAUMANN SPRINGS Springs and Stampings for the World. SPIRAL SPRINGS COMPRESSION SPRINGS WAVE SPRINGS ASSEMBLIES HUBCAP & RETAINING TENSION AND TORSION SPRINGS MICRO SPRINGS PRESSINGS AND STAMPINGS
More informationWe store: high. wide. deep. safe. Cantilever racks. System K100 single-sided double-sided
We store: high. wide. deep. safe. Cantilever racks System K100 Economical Use of Space The K100 cantilever rack from Vogelsang meets all of the requirements when it comes to economically storing long and
More informationOETIKER. Technical Data Sheet. 1-Ear Clamps. 1-Ear Clamps with Insert. 2-Ear Clamps. Connecting Technology. Dimple. Ear. Ear width.
OETIKER width Technical Data Sheet 1- Clamps Product Group 153 Insert width 1- Clamps with Insert Product Group 154 width (Double clamping range) 2- Clamps Product Group 101 & 151 Connecting Technology
More informationBRUSHES WITH SHANK 62 63
6 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0.5 0.0 STH 0.50 0.00 ROH 0.50 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 75 9 /8 5 5/8 8 5,000
More informationTOP VIEW SIDE VIEW. Description: Clam shell socket for 4.5x12.5mm, 0.4mm pitch QFN74 SECTION B-B SECTION A-A. CG-QFN-7010 Drawing.
3.00 THRU ALL A A1 corner GHz QFN Socket - Direct mount, solderless Features A 25.48 Directly mounts to target PCB (needs tooling holes) with hardware High speed, reliable Elastomer connection Minimum
More informationSUPERPLUS M8-M16. The undercut fixing system that does not require a special setting tool. FUNCTION BENEFITS
SUPERPLUS M8-M16 The undercut fixing system that does not require a special setting tool. FUNCTION Automatic self-undercutting. The unique design of the SUPERPLUS causes an undercut to be created when
More informationJongen Werkzeugtechnik. Working depth. Drilling by JONGEN. 3 x D. BP 04 to 12
Jongen Werkzeugtechnik Working depth 3 x D Drilling by JONGEN BP 04 to 12 THE TOOL New at Jongen: universally applicable high-performance drill for use on lathes and milling centers. It offers the highest
More informationDiaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
More informationHUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS FLOORTIGHT PMF PWF F E
HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS D B PMF A C D H B C PWF A F E 162 HUCK INTERACTIVE CD ROM : DIMENSIONS Min Max Recommended Max Max Max Max Nominal Nominal Diameter Hole Size Hole Size
More information