P600 Pressure Regulator
|
|
|
- Marilynn Knight
- 5 years ago
- Views:
Transcription
1 P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with a non-relieving option, an internal relief valve option or monitoring regulator option, the P00 is designed to maintain a constant, preset downstream pressure. Applications Industrial and Commercial Gas Regulation Compressors Gas Engines Materials of Construction Adjusting Screw Zinc Body Cast Iron Bonnet Cast Iron Closing Cap Acetal Diaphragm Nitrile Housing Cast Iron Molded Seat Assembly Nitrile / Aluminium Upper/Lower Spring Seat Plated Steel P00 Series Maximum Inlet Pressures Orifice size, Inches (mm) With. PSIG (0.08 bar) or Less Pressure Setting Table : Maximum Operation Inlet Pressure, PSIG (bar) With. to.5 PSIG (0.08 to 0.7 bar) Pressure Setting With.5 to 7 PSIG (0.7 to 0.8 bar) Pressure Setting /8 (.7) 50 (0.) 50 (0.) 50 (0.) / (.7) 50 (0.) 50 (0.) 50 (0.) / (.5) 75 (5.7) 50 (0.) 50 (0.) /8 (.5) 5 (.) 0 (.) 0 (.) / (.7) 8 (0.55) 0 (0.) (0.8) / (.) 5 (0.) (0.) 8 (0.55) Specifications Maximum Inlet See Table Maximum Emergency 0 PSIG Pressure Ranges See Table Port Sizes / NPT NPT /8" /" Orifice Sizes /" /8" /" /" End Connections NPT Temperature Range -0 F to 80 F - C to 8 C Approx. Weight lbs. (. kg) Spring Case Vent Connection / NPT Diaphragm Case (Control Line) / NPT Connection P00 Series Range Springs Table Spring Ranges Spring Color Part Number WC or PSIG BAR - 8" WC.0 to.0 Red " WC.07 to.0 Olive " WC to. PSIG.07 to.08 Yellow PSIG.08 to.7 Light Green PSIG.7 to. Light Blue PSIG. to.8 Black belgas.net
2 P00 Regulator Rebuild Kits P00 Part Matrix O & M Version R Version Kit Includes Diaphragm, body O-ring, insert O-ring, seat assembly, cotter pin, seat stem O-ring, throat seal O-ring Diaphragm, body O-ring, insert O-ring, seat assembly, cotter pin Spring Range with Spring Case Upward to 8 inches WC (0 to 0 mbar) 7 to inches WC (7 to 0 mbar) 5 inches WC to. PSIG (7 to 8 mbar). to.5 PSIG (0.08 to 0.7 bar).5 to.5 PSIG (0.7 to 0. bar).5 to 7 PSIG (0. to 0.8 bar) Part Number P00 Internal Relief Discharge Internal Relief Start-to-Discharge. Pressure Above Set Pressure 0 to inches WC (5 to 0 mbar) 0 to inches WC (5 to 5 mbar) 0 to inches WC (5 to 5 mbar) 0.5 to PSIG (0.0 to 0. bar 0.5 to PSIG (0.0 to 0. bar) to PSIG (0.0 to 0.8 bar) (Actual outlet pressure maybe lower with spring case downward.) P00 Body Positions P00 0 Body 0 / NPT 08 NPT Spring Range WC 0 7- WC 00 5 WC -. PSIG PSIG PSIG PSIG Options 0 None M Monitor Version R Relieving Version Vent Assembly 0 Up Down Orifice /8" /" /" /8" 8 /" /" Body Position Up (Standard) Down Right Left Bonnet Vent Orientation C O'Clock (Standard) D O'Clock E O'Clock F O'Clock 0 UP DOWN RIGHT LEFT P00 Vent Positions UP DOWN RIGHT LEFT C D E F C D E F belgas.net
3 P00 Dimensions Body Size A B C Inches NPT Inches Inches Inches / /" NPT VENT CONNECTION WITH REMOVABLE VENT /" OR " NPT PORTS 5. A /" NPT CONTROL LINE CONNECTION ON TYPE P00M 8. C B.05 A/ belgas.net
4 P00 Flow Capacities in SCFH (Nm /h) of 0. Specific Gravity Natural Gas Pressure Range to 8 inches WC (0 to 0 mbar) 7 to inches WC (7 to 0 mbar) 5 inches WC to. PSIG (7 to 8 mbar). to.5 PSIG (8 to 7 mbar).5 to.5 PSIG (7 to 0 mbar).5 to 7 PSIG (0 to 8 mbar) Offset from Setpoint inch WC ( mbar) inch WC ( mbar) 5-/ inches WC ( mbar) 0. PSIG ( mbar) 0. PSIG ( mbar) 0.7 PSIG (8 mbar) Pressure Setting 7 inches WC (7 mbar) inches WC (7 mbar) 5 inches WC (7 mbar). PSIG (8 mbar). PSIG (8 mbar).5 PSIG (7 mbar).5 PSIG (7 mbar).5 PSIG (0 mbar).5 PSIG (0 mbar) 7 PSIG (8 mbar) Inlet Pressure NPT / Body Size Orifice Size, Inches (mm) PSIG BAR /8 (.) / (.8) / (.) /8 (.5) / (.7) / (.) (.) 70 (.50) 0 (.) 50 (.57) 0 (.0) 0 (.8) (5.87) 80 (7.) 50 (.) 0 (.) 50 (.8) 70 (5.) (.) 80 (.8) 50 (.) 50 (.5) 50 (5.) (.8) 00 (.) 0 (.) 50 (7.) 5. 0 (7.) 70 (8.0) 80 (.5) 00 (.) (0.7) 80 (.5) 0 (5.) (.) 0 (.) (.) 0 (.) 0 (.5) 0 (5.0) 0 (.) 50 (.57) (.5) 50 (.57) 80 (7.) 50 (.) 50 (.) 750 (0.0) (.50) 50 (.) 0 (.) 50 (.) 50 (.5) (.) 0 (.) 50 (5.) 0 (.) (.8) 50 (.) 0 (.) 50 (7.) (7.) 0 (7.) 0 (5.) (.) 00 (55.) 0. 0 (.) 0 (8.8) 500 (.5) 00 (.) 00 (.) 50 (0.8) (.57) 50 (.5) 0 (.) 0 (.) 00 (5.) (8.8) 800 (.) 0 (7.0) 0 (5.) (8.) 50 (8.7) 0 (.0) 50 (5.7) 0. 0 (.) 0 (.0) 80 (.) (8.8) 70 (7.) 0. 0 (.) 0 (.) 0 (.) 00 (.) 80 (.8) 700 (8.7) (.57) 0 (.) 700 (8.7) 0 (.) 0 (8.0) (8.) 0 (7.) 00 (7.) 0 (8.0) (8.0) 0 (.7) 00 (55.) 0 (5.0) 0. 0 (0.) 80 (58.) 50 (8.) (.) 50 (70.) 0. 0 (.) 70 (.50) 0 (5.87) 50 (.) 0 (.) 50 (.8) (.85) 0 (8.8) 50 (.) 70 (.7) 850 (.8) 070 (8.7) (5.0) 0 (.8) 50 (5.) 00 (7.0) 70 (.5) (.) 00 (.) 550 (.5) 70 (.0) (.) 0 (.7) 80 (.) 0 (.) (5.) 80 (.) 500 (.8) 0. 0 (.8) 0 (5.0) 0 (.) 50 (.) 50 (5.) 80 (8.) (.50) 0 (8.8) 0 (.) 570 (5.) 80 (.) 0. 0 (.) 0 (7.) 80 (.) 00 (7.7) (0.0) 850 (.8) 0 (5.) 50 (0.) (.8) 0 (.) 50 (8.) 0. 0 (.) 80 (.85) 0 (5.0) 0 (8.) 70 (0.0) 80 (.8) (.8) 80 (7.) 0 (.7) 50 (.8) 70 (.0) 800 (.) (5.0) 0 (.7) 0 (.) 80 (8.) 0 (.) 0. 0 (.) 0 (.) 00 (.) 0 (.7) 0. 0 (7.) 00 (7.0) 70 (.) 80 (.) (.) 00 (55.) 0 () (.) 0 (5.0) 50 (.57) 00 (0.7) 50 (.8) 50 (.5) (.5) 0 (5.5) 0 (8.) 50 (.) 70 (.) (7.) 0 (.) 70 (0.) 80 (.) (5.) 80 (.8) 0 (.) 0 (.0) (.) 0 (.) 0 (.8) 0. 0 (5.0) 0 (8.) 0 (.) 0 (.) 0 (.) 0 (.) (5.5) 00 (0.7) 50 (.) 80 (.8) 50 (0.8) (.8) 80 (.) 00 (.) 80 (8.) (.) 50 (0.8) 050 (55.0) 70 (7.) (5.) 80 (.) 500 (5) 0. 0 (.5) 0 (5.5) 70 (7.) 50 (.8) 0 (.) 0 (7.) (5.0) 0 (8.) 70 (0.0) 50 (7.) 80 (.) (.) 700 (8.7) 00 (.) 0 (5.) (.) 0 (.) 70 (.0) 50 (5.7) (5.) 50 (8.) 050 (0) - Shaded areas show where maximum operating inlet pressure for a given port diameter is exceeded. belgas.net
5 P00 Flow Capacities in SCFH (Nm /h) of 0. Specific Gravity Natural Gas Pressure Range to 8 inches WC (0 to 0 mbar) 7 to inches WC (7 to 0 mbar) 5 inches WC to. PSIG (7 to 8 mbar). to.5 PSIG (8 to 7 mbar).5 to.5 PSIG (7 to 0 mbar).5 to 7 PSIG (0 to 8 mbar) Offset from Setpoint inch WC ( mbar) inch WC ( mbar) 5-/ inches WC ( mbar) 0. PSIG ( mbar) 0. PSIG ( mbar) 0.7 PSIG (8 mbar) Pressure Setting 7 inches WC (7 mbar) inches WC (7 mbar) 5 inches WC (7 mbar). PSIG (8 mbar). PSIG (8 mbar).5 PSIG (7 mbar).5 PSIG (7 mbar).5 PSIG (0 mbar).5 PSIG (0 mbar) 7 PSIG (8 mbar). Limited due to boost - Shaded areas show where maximum operating inlet pressure for a given port diameter is exceeded. Inlet Pressure NPT Body Size Orifice Size, Inches (mm) PSIG BAR /8 (.) / (.8) / (.) /8 (.5) / (.7) / (.) (.) 0 (5.87) 50 (.57) 00 (7.) 0 (.) 50 (.) (5.87) 0 (.) 50 (.) 0 (0.) 00 (50.8) 0 (5.5) (.) 0 (.) 50 (.) 0 (57.) 0 (.) (.8) 70 (5.) 80 (8.) 70 (.5) (.0) 80 (.8) 00 (.5) 0 (.) (7.7) 00 (.) 0 (7.) (.) 0 (.) (.) 0 (.5) 70 (.50) 0 (5.5) 0 (.) 50 (.57) (.5) 00 (7.) 0 (8.) 50 (.8) 0 (.) 0 (.) (.50) 0 (.7) 0 (.) 0 (.) 0 (.) (.) 580 (5.) 780 (0.7) 0 (.) (.) 00 (7.7) 80 (7.5) 0 (.8) (.) 0 (.) 50 (0.) (.7) 0 (.) 0. 0 (.) 0 (.) 500 (.) 00 (.5) 0 (.) 0 (.8) (.70) 750 (0.) 0 (.) 500 (7.0) 800 (75.0) (.) 0 (.7) 50 (.) 50 (87.) (8.) 50 (.8) 80 (75.8) 50 () 0. 0 (.) 550 (8.) 0 () (.) 770 (7.) 0. 0 (.) 00 (0.7) 0 (.) 80 (.0) 80 (.5) 00 (.) (.57) 0 (.) 700 (8.8) 550 (.5) 0 (.) (8.58) 80 (.0) 00 (7.) 0 (.) (8.0) 50 (.) 550 (8.) 0 (8) 0. 0 (0.) 550 (8.) 0 () (8.) 00 (8.) 0. 0 (.) 0 (5.5) 0 (.) 0 (.5) 0 (.) 0 (7.) (.85) 0 (8.8) 50 (.) 750 (0.) 880 (.5) 080 (.) (5.0) 50 (.) 50 (7.) 50 (0.8) 750 (7.0) 0. 0 (.) 0 (.) 00 (.) 0 (5.) (7.0) 50 (5.7) 00 (.5) 0 (.) (5.) 80 (.) 870 (0) 0. 0 (.8) 0 (.) 70 (7.) 500 (.) 70 (8.0) 80 (8.) (.85) 50 (.) 0 (.) 70 (.0) 80 (.) (5.) 70 (.) 00 (7.7) 0 (.0) (.8) 80 (.) 50 (7.) 0 (8.) (58.8) 50 (8.) 80 (.) 0. 0 (.8) 80 (.85) 0 (5.0) 0 (.) 0 (.) 80 (.8) (.85) 0 (8.) 0 (.7) 70 (.0) 70 (.7) 00 (.) (5.0) 00 (0.7) 0 (.) 0 (.) 0 (5.) 0. 0 (.) 0 (.) 00 (.) 80 (.) 0. 0 (7.) 0 (.) 70 (.7) 70 (7.) (5.) 00 (0) 0 (78) (.) 0 (5.0) 50 (.57) 0 (.) 50 (.8) 50 (.5) (.5) 0 (5.5) 0 (8.) 0 (.) 850 (.8) 0. 0 (0.) 50 (.8) 70 (0.) 0 (.) 0. 0 (.) 80 (.5) 0 (.) 580 (.) (7.) 880 (77.) 0 () 0. 0 (5.5) 0 (8.) 0 (.) 770 (0.) 70 (5.) 050 (8.0) (.) 00 (0.7) 50 (.) 00 (7.0) 0 (.) (.8) 80 (.) 00 (.) 080 (55.7) (.5) 50 (0.8) 050 (55.0) 50 (7.8) (55.) 50 (.0) 000 () 0. 0 (.5) 0 (5.5) 70 (7.) 50 (5.) 0 (.) 0 (7.) (5.5) 0 (8.) 70 (0.0) 770 (0.7) 80 (.) (0.0) 700 (8.7) 00 (.) 50 (.) (.) 0 (.) 70 (.0) 70 (7.0) (5.) 0 (0.) 0 () belgas.net 5
6 P00 Parts List Item Description Qty. Part Number /" Iron " NPT - Iron Body Bolts - Plated Steel Bonnet - Iron Lower Casing - Iron Orifices /8" Aluminum /" Aluminum /" Aluminum /8" Aluminum /" Aluminum /" Aluminum Range Springs " - 8" WC - Red, Plated Steel " - " WC - Olive Drab, Plated Steel " WC -. PSIG - Yellow, Plated Steel PSIG -.5 PSIG - Light Green, Plated Steel PSIG -.5 PSIG - Light Blue, Plated Steel PSIG - 7 PSIG - Black, Plated Steel Diaphragm Heads 7 Diaphragm Head - O & M Versions - Stainless Steel Diaphragm Head - R Version Only - Plated Steel Pusher Post 8 Pusher Post - O & M Versions - Aluminum Pusher Post - R Version - Zamak Diaphragms Diaphragm - Nitrile - O & M Versions Diaphragm - Nitrile - R Version Only Body O-ring - Nitrile Insert O-Ring - Nitrile Seat Assembly - Nitrile Seat Stem - Anodized Aluminum Cotter Pin (Not Shown) - Stainless Steel Lever Assembly - Plated Steel Lever Screw - Plated Steel Seat Assembly Guide Insert - Aluminum Bonnet Cap - Plastic Build Screw Nuts - Plated Steel Build Screws - Plated Steel Vent Assembly - Spring Case Up (Standard) - Plastic Vent Assembly - Spring Case Down - Plastic Seat Stem O-ring - M Version Only - Nitrile Throat Seal O-ring - M Version Only - Nitrile Pilot Tube Assembly - O & R Versions - Stainless Steel Insert Screws O & R Version - Stainless Steel M Version - Plated Steel Adjustment Screw - Zinc Lower spring Washer - O & M Versions - Plated Steel --00 Spring Holder - R Version Only - Plated Steel Diaphragm Cap Screw - O & M Versions - Plated Steel Relief Valve Spring - R Version Only - Stainless Steel Back-up Ring - Stainless Steel Lower Spring Seat - O & M Versions - Plated Steel Cap Gasket - Neoprene P00 R P00R VERSION P00 M P00M VERSION DETAIL B SCALE : Parts included in P00 O and M Repair Kit, Parts included in P00 R Repair Kit, SEE DETAIL B belgas.net
7 P00 Parts Drawing P P00 VERSION SEE DETAIL A Parts included in P00 O and M Repair Kit, DETAIL A SCALE : 0CW8WEB belgas.net 7
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator used in commercial and industrial applications
P630 HIGH FLOW GAS REGULATOR
P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a
289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
133 Series Self-Operated Regulators
133 Series Self-Operated Regulators z Wide Pressure Range Capability with Single Regulator Type 133H may also use Type 133L springs, allowing pressure settings to be varied between 2-inches wc and 10 psig
289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
Maximum Inlet Pressure. 400 psig (27,6 bar), For higher inlet pressures, up to 1000 psig (69 bar), see Bulletin 71.2:99.
Introduction Maximum Inlet Pressure The Type 99 regulator typically provides fuel gas to boilers, furnaces, ovens, mixers, and large commercial or institutional installations. 400 psig (27,6 bar), or higher
COMBUSTION CONTROL ACCESSORIES GAS PRESSURE REGULATOR (GPR)
H a u c k M a nu f a c t u r i n g C o m p a ny GAS PRESSURE REGULATOR (GPR) applications. R622 regulators are direct-operated, spring loaded regulators used for a variety of combustion applications. Gas
PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
Table of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
Model and 2 Heavy-Duty Regulator. Regulator Features: Regulator Specifications:
Model 5600 1 and 2 Heavy-Duty Regulator The Model 5600 is a spring-loaded, self-operated pressure regulator, available in 1 and 2 sizes and built to withstand the most difficult processes and environments.
1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
Gas Pressure Regulator HON 330
Gas Pressure Regulator HON 330 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 330.20 EDITION 01/2017 330.20 p. 2 330.20 p. 23 Compensating diaphragm (118,168, 243,
MODEL LP 225LP2 225LP4 Safety Relief Valves
Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
PRESSURE REGULATORS GAS OUNCES BACK PRESSURE TO VACUUM
PRESSURE REGULATORS GAS OUNCES BACK PRESSURE TO VACUUM APPLICATIONS: To maintain ounces of positive pressure on systems flowing into a downstream vacuum, such as vapor recovery systems. CERTIFICATIONS:
B838 Series Regulator Twin Parallel Flow Service Regulators
Gas B88 Series Regulator Twin Parallel Flow Service Regulators Applications The B88 series regulators are designed for commercial and industrial applications. The twin unit concept provides excellent control
Relays & Volume Boosters
Relays & Volume Boosters Type 20 Type 20 HR Type 20 EX HR Type 72 Type 72 HR HR Type 79 Type 79 HR www.marshbellofram.com 800.727.5646 37 Relays - Volume Boosters Comparison Chart Maximum Type 20 Type
Iron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
Pre s sure Re gulators
www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
Modulating liquid level regulators direct operated, for low pressure side types SV 4, 5 and 6 REFRIGERATION AND AIR CONDITIONING.
Modulating liquid level regulators direct operated, for low pressure side types SV 4, 5 and 6 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
Float valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications.
Section 16 Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Contents F22 General Purpose Stainless Steel Filter 1/2" Port Size....................................LE-16-2
Pressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
94130 Pressure Relief Vent (Open or Closed Vent Option) Features
94130 (Open or Closed Vent Option) The Shand & Jurs 94130 is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily serviceable configuration and
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
BULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
PACKLESS VALVES. Instrument/Analyzer Products. Catalog 4515/USA April 2003
PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 table of contents NV55........................ 1-2 Nova
Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models
www.swagelok.com Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators 2 Swagelok Pressure Regulator Features Stem Fine-pitch
Gas Pressure Regulator RMG 330
Gas Pressure Regulator RMG 330 Operation and Maintenance, 330.20 Spare Parts edition 11/1995 For integrated safety cutoff unit please refer to technical leaflet 720.20 Serving the Gas Industry WORLDWIDE
Varec 2010B/2020B Pressure and Vacuum Relief Valves 2010B
Varec 0B/B The Varec 0B/B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction The Varec 0B and B and Relief
Sanitary Pressure Regulators RHPS Series
www.swagelok.com Sanitary Pressure Regulators RHPS Series Pressure-reducing regulators and tank blanketing regulators 316L stainless steel construction 1/2, 1, and 1 1/2 in. end connections Working pressures
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
DOWN MOUNT PRODUCTS. Catalog 4518/USA December 2005
DOWN MOUNT PRODUCTS Catalog 4518/USA December 2005 DM3000 Series s presents the DM3000 Series pressure regulator. The DM3000 is a miniature threadless type, non-tied diaphragm regulator with a footprint
Air Regulators. Type 10. Type 110. Type 40. Type 41. Type 50. Type 50 NACE. Type 51. Type 51SS. Type 60. Type 65. Type 70. Type 70BP. Type 77.
Air Regulators Type 10 Type 110 Type 40 Type 41 Type 50 Type 50 NACE Type 51 Type 51SS Type 60 Type 65 Type 70 Type 70BP Type 77 Type 78 Type 91 Type 92 www.marshbellofram.com 800.727.5646 1 Type 10 Pressure
MECHANICAL LEVEL CONTROLS
FLANGED TRUNNION ASSEMBLY DUCTILE IRON APPLICATIONS: Used on oil and gas separators, freewater knockouts (FWKO), horizontal emulsion treaters and similar equipment where a float is desired to monitor fluid
Particulate Filters. Filter Function. Exclusive Dense Pack Element Design. Optional Components
Particulate ilters Inlet Outlet Monnier particulate filters remove solid and liquid contaminants from compressed air. The proper selection and use of compressed air filters will prevent many short and
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT CONSTRUCTION OPERATING NUT-cast one piece bronze operating nut. Design of the operating thread permits slow closing of the hydrant valve,
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Lead Free LEAD FREE VALVES A H E AD OF TH E F L O W CATALOG C-LFV nibcoleadfree.com. *Weighted average lead content 0.25%
Lead Free LEAD FREE VALVES * A H E AD OF TH E F L O W nibcoleadfree.com CATALOG C-LFV-0416 THE LEAD FREE AUTHORITY AUTHORITY FREE LEAD THE WROT COPPER & CAST PERFORMANCE BRONZE Sweat and thread Size range:
Application Map. Regulator Handbook: Air Solutions. Introduction. High Pressure Source (Instrument Supply Air) 1301F 67CFR A 167A 2625
)EH Manufacturing and process plants use compressed air as a power supply for many devices within the plant. Plant air, also called shop air, is used for cooling and as a power source for pneumatic ols,
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Materials Materials Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown.
19000 Materials Materials 15 6 9 10 14 7 8 5 7 3 2 4 1 19000-2 Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown. 19000.5 19000 (SRV-1/Q3.01) 19000
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
Description Advanced Features Typical Applications
2 Series single stage, brass body regulator The 2 Series regulators are intended for primary pressure control of non-corrosive, high purity or liquefi ed gases (up to grade.5) in applications where minor
Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
94160 Pressure Relief Vent. Features. Pressure Relief Vent. Designed for high efficiency & economy. Provides maximum flow capacity
The Shand & Jurs provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high efficiency. The improved
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
H-25 Series. Up to 20 gpm (75.7/min) H-25 Specialized Designs
H-25 Series Up to 2 gpm (75.7/min) H-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The H-25 Hydra-Cell
OUNCES PRESSURE REGULATORS
OUNCES PRESSURE REGULATORS BACK PRESSURE TO ATMOSPHERE W/OUTSIDE SUPPLY Adjusting Screw 897 Nut 922 636SS6 (2.5 lbs. Std.) Spring Plate 636SS6 (5 lbs. Opt.) 7148S6 (20 lbs. Opt.) Bonnet 1336 Nut 2912 Screw
AMERICAN DARLING 5 1 /4" B-62-B FIRE HYDRANT
AMERICAN DARLING 5 1 /4" B-62-B FIRE HYDRANT CONSTRUCTION PIPE PLUG-provides access to lubrication chamber. Pipe plug can be replaced with lubricating fitting to lubricate the rod threads and thrust washers.
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
1. Required Minimum Flow:
SECTION 6 6. 6.01 General The City of Castle Rock Water System Minimum Standards and Specifications are minimum base level performance, design, and construction standards used to maintain uniformity of
Dival 500. Pressure Regulators. Phone: Fax:
Pressure Regulators www.mvandc.com Pressure Regulators The DIVAL 500 series of spring loaded, diaphragm controlled, balanced valve design regulators are suitable for low, medium and high outlet pressure.
BALL VALVES SUPERIOR BALL VALVES WA SERIES (WELDED) WA Series Ball Valve. WAS Series Ball Valve (With Access Fitting)
BALL VALVES SUPERIOR BALL VALVES WA SERIES (WELDED) WAS Series (Welded with Access Fittings) Full Refrigeration Service Temperature Range of -40 F to +325 F. Forged Brass Body and Seal Cap. Design Working
Cash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
Consolidated* Electromatic* Ball Valves
GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown
Equipment Catalog. For inquiries and orders, please contact:
Equipment Catalog 1 2 Table of contents...pages Force Flow 100 Lube Pump... 4 Bucket Pumps... 5 Packing Injection Fitting Body Vent (Bleeder) Fittings... 6 1200 & 1500 Lube Pumps... 7 Hose Assemblies Gages
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
94115 Vacuum Vent (Side Mounted) Features. Vacuum Vent (Side Mounted) Side Mounted
94115 The Shand & Jurs 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum
Specification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
Varec 3500B, 3600B and 3650B Series Weight Loaded Vacuum or Pressure Relief Valves. 3500B Series
Varec 00B, 00B and 0B Series Weight Loaded or Pressure Relief Valves The 00B, 00B and 0B vacuum breakers are designed to provide superior seat tightness while protecting liquid storage vessels, vapor recovery
governor Line Pressure Regulators
governor Line Pressure Regulators *** APPLICATION NOTES *** 1. The Governor regulator is ANSI Z21.80a and ANSI Z21.18 certified for vent limited installations (indoor installations where a vent line is
ANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
* Approximate flow at 90 psig (6.3 bar) inlet pressure and 5 psig (0.35 bar) pressure drop. F07 FLOW CHARACTERISTICS
ir line equipment F7 iniature Series 7 eneral Purpose Filter 1/" and 1/" s Compact design Protects air operated devices by removing liquid and solid contaminants Screw-on bowl reduces maintenance time
A measured step forward
A measured step forward TM 1730 Series Parts List Contents Code Number Configuration - Model 1730... 2 General Parts...3 Manual Stroke Length Assembly... 7 Speed Reducer...9 Plunger Assembly - Standard...
DRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial
DRAINS: BATH,, SHOWER &, S COMMERCIAL SHOWER DRAINS GENERAL PURPOSE DRAINS FIT-FLUSH CLEAN-OUTS BATH WASTES BATH WASTES KITS/PARTS/COMPONENTS BATH DRAIN BODIES/ASSEMBLIES BATH DRAIN KITS/PARTS/COMPONENTS
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
450 and 550 Series Pressure/Vacuum Relief Valve (ATEX Approved)
Instruction Manual 450 and 550 Series March 2015 450 and 550 Series Pressure/Vacuum Relief Valve (ATEX Approved) Table of Contents Introduction...1 Specifications...2 Principle of Operation...4 Installation...4
Consolidated* /2/3 Series (1) Electromatic* Ball Valve System
Technical Specifications Rev. C - 09/2018 Consolidated* 3500-1/2/3 Series (1) Electromatic* Ball Valve System Provides automatic or manual overpressure startup for steam boiler systems and assists startup
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
TEMPERATURE CONTROLLERS
LOW TEMPERATURE BASE ASSEMBLIES APPLICATIONS: Used to control a set temperature in indirect heaters, emulsion treaters, reboilers, steam generators, heat exchangers, cooler shutter controls, and salt bath
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
Anderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications : Ductile iron disc All positions Low
Series Regulators - Pressure Reducing
26-1200 Series Regulators - Pressure Reducing D26120540X012 Specifications For other materials or modifications, please consult TESCOM. 3600 and psig 248 and 414 bar Outlet Pressure To maximum inlet Design
Includes Hydrojet Total Performance System. Effective: MARCH, 2012 ECO 7496
RESIDENTIAL AND LIGHT DUTY COMMERCIAL GAS REPLACEMENT PARTS LIST High Performance Energy Saver (GX) Non-Defender Energy Saver M(I,1,2)(XR)(65,75,100) Gallon Light Duty Energy Saver Models Includes Hydrojet
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves