GROUNDING. Ground-Lok CLAMP SYSTEM SERRATED HEAD - (COMPONENTS)
|
|
- Kelly Wood
- 5 years ago
- Views:
Transcription
1 PAGE 70 GREAVES EXCLUSIVE Ground-Lok CLAMP SYSTEM SERRATED HEAD - (COMPONENTS) BRONZE WATER PIPE CLAMPS Interchangeable clamps and adapters provide versatility Matching serrations assure positive lock of adapter to clamp Heavy duty construction - cast bronze body and plated steel screws G SERIES WATER PIPE MAX CLAMPS 300 G / to G G / to / to # STR Clamp 3060 G 3 / to G 0 ADAPTERS CABLE ARMORED #/0 STR # STR 0 Wire Adapter CONDUIT HUB G G / 3/ # /0 STR # 3/0 STR 0 0 Conduit Adapter 3070 G 3 # 3/0 STR 0 PLATING: For tin-plating add suffix letter P to catalog numbers. UL listed to # AWG. CSA certified as shown. CLAMPS + ADAPTERS = 0 COMBINATIONS Available with brass screws. See page 7 All adapters fit all clamps Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
2 PAGE G 3 G G 5 G 6 INCLUDES ADAPTER TYPE ADAPTER WATER PIPE / - / - / - / - 6 FOR / RIGID CONDUIT MAX /0 STR Ground-Lok CLAMP SYSTEM SERRATED HEAD - (ASSEMBLED) BRONZE WATER PIPE CLAMPS 0 GREAVES EXCLUSIVE G 5 G 6 G 8 G 9 / CONDUIT / - / - / - / - 6 /0 STR 0 FOR 3 / RIGID CONDUIT G 7 G 8 G G 3/ CONDUIT / - / - / - / - 6 3/0 STR 0 FOR RIGID CONDUIT G 9 G 0 G G CONDUIT / - / - / - / - 6 3/0 STR 0 PLATING: For tin-plating add suffix letter P to catalog numbers. UL listed to # AWG. CSA certified as shown. GBS SERIES Ground-Lok CLAMP SYSTEM BRASS SCREWS G BS G BS G BS G 3 BS G 0 BS G BS G BS G 3 BS G 3 BS G BS INCLUDES ADAPTER TYPE Wire / Conduit 3/ Conduit Conduit Wire Wire WATER PIPE / - / - / - / - 6 / - / - MAX STR /0 STR /0 STR 3/0 STR 3/0 STR /0 STR /0 STR PLATING: For tin-plating add suffix letter P to catalog numbers. UL listed to # AWG. CSA certified as shown. Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
3 PAGE 7 ECONOMY PIPE CLAMPS Bare Wire Type Cast bronze high-copper alloy pipe clamp with plated steel screws For bonding bare copper wire to water pipe, such as a water meter shunt WATER PIPE SlZE WlRE MAX FIG 300 G S / TO STR 3080 G S / TO STR Armored Wire Type Cast bronze high-copper alloy pipe clamp with plated steel screws For bonding bare or armored copper wire Also use with jacketed cables or cords Separate two-screw clamping strap for armor G 0 G S G 5S G 6S WATER PIPE SlZE / TO / TO WATER PIPE SlZE / TO / TO WlRE MAX STR STR FIG FIG / Conduit Type Cast bronze high-copper alloy pipe clamp with plated steel screws Hub threaded for / conduit Connect wire under hub-screw WlRE MAX 6 SOL 6 SOL 0 Brass Screw Type Cast bronze high-copper alloy pipe clamp with brass screws For bonding bare copper wire to water pipe, such as a water meter shunt Figure Figure Figure 3 WATER PIPE SlZE WlRE MAX FIG 7060 G S-BS / TO STR 706 G S-BS / TO STR Type Cast bronze high-copper alloy pipe clamp with silicon bronze screws For bonding bare copper wire to water pipe, such as a water meter shunt UL listed for direct burial in earth or concrete, G 0-DB has armor clamp Figure WATER PIPE SlZE WlRE MAX. FIG 7060 G S-DB / TO STR G S-DB / TO STR G 0-DB / TO STR Figure 5 PLATING: For tin plating add suffix letter P to catalog numbers. Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
4 PAGE 73 ROD CLAMPS Silicon bronze body for maximum strength, silicon bronze bolt for maximum clamping force UL listed for direct burial in earth and concrete G SERIES G 9 G 30 G 3 G 3 G 0 G 580 G 30 G 00 ROD (IN) HEAVY DUTY / 3/ * HEAVY DUTY / 3/ MAX STR SOL /0 SOL SOL STR /0 STR /0 STR /0 STR ECONOMY CLAMP 705 G 3E STR PLATING: For tin plating add suffix letter P to catalog numbers. * For allen set screws add suffix A to catalog number and add 0% to above price. COMPRESSION TERMINAL Wrought copper for irreversible direct burial grounding terminations 3 / bolt hole spacing for / bolts Prefilled with BugLug oxide-inhibitor and capped L-NDB SERIES L 0NDB L 0NDB L 30NDB L 0NDB L NDB L 3NDB L 0NDB /0 /0 3/0 /0 3 0 DIE INDEX TRANSFORMER CONNECTORS For transformers with /-3 tapped hole Bronze body - High conductivity copper alloy High strength bronze eye bolt, nut, lock washer GLT SERIES GLT GLT 0 GLT MAX. MIN. STR 0 SOL /0 STR 8 SOL MCM 6 STR Plating: For tin plating add suffix P to catalog number. Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
5 PAGE 7 GREAVES EXCLUSIVE HIGH-WING SYSTEM Continuous Run Capability For Grounding and Bonding Corrosion-resistant cast bronze alloy body, silicon bronze hardware Applications include galvanized pipe, rod, tube, fencing, rebar (#6, 3/ and up) Suitable for use in harsh environments such as agricultural buildings, swimming pool/spa, food processing, marine, grounding grid and others Orient head in any direction - lock in position with serrated teeth Replaces exothermic welding Clamps are approved for direct burial in earth and concrete G-DB SERIES G 0-DB G 0-DB G 0-DB G 60-DB Not for use on epoxy coated rebar WATER PIPE SlZE / - / - / - / - 6 REBAR # INCH 6-9 3/ - /8 3 /8 #/0STR-0SOL 0 Wire up to #/0 AWG Pipe sizes / to 6 REBAR CLAMPS Jones Bond Lay-in Rebar Clamp for Continuous Loop Grounding / Bonding Pool / Spa bonding and grounding Ufer Grounding (concrete encased electrodes) Replaces Exothermic Welding Installs quickly, grips rebar firmly between ridges with special teeth Bronze body, stainless steel screw for direct burial CSA Certified for direct burial in earth and concrete on rebar J-DB SERIES J 9-DB J 30-DB *J 3-DB ** J 3-DB 8-6 SOL 8 SOL - STR 6 SOL - /0 STR 6 SOL - /0 STR REBAR # INCH 3 / 5,5,6 /,,3/ WEIGHT LBS/ Not for use on epoxy coated rebar. *UL listed for # STR - # STR ** UL pending Patent Pending Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
6 PAGE NEC Article.5(A)(3) requires all present grounding electrodes to be bonded together to form a grounding electrode system. Present concrete-encased electrodes (re-enforcing bar, or rebar) and/or grounded I-beam must be included in the grounding electrode system. The result is a more effective and reliable grounding system. REBAR UFER CLAMPS Lay-in feature allows continuous loop wiring Bronze bodies with bronze or stainless steel hardware For use in other harsh environments such as swimming pool/spa, agricultural buildings, food processing, marine, communications grid and others Compared to compression and exothermic methods for rebar Ufer grounding and bonding, Greaves mechanical clamps provide fast installation and range-taking capability. Use to connect wire to rebar J-DB SERIES J 9-DB J 30-DB J 3-DB ** J 3-DB Not for use on epoxy-coated rebar *UL listed for # STR - # STR G 0-DB G 0-DB G R-DB G M-DB C 0 C 0 C 08 C C 0 REBAR # INCH 3 / 5,5,6 /,,3/ REBAR # INCH 6-9 3/ - /8 3 /8 REBAR # INCH REBAR # INCH / - 3/ 7-8 7/ /8-3 / / Jones Rebar Clamps **UL pending 8-6 SOL 8 SOL- STR *6 SOL - /0 STR 6 SOL - /0 STR #/0STR-0SOL #0 - #-/0 Use to connect wire to galvanized water pipe, rod, tube, fence post, or rebar Orient head in any direction - lock in position with serrated teeth G-DB SERIES Use to connect wire to rebar or water pipe GR-DB SERIES HIGH-WING System 0 Lay-in Rebar Clamp Use to connect wire to galvanized water pipe, conduit, rod, tube, fence post, or rebar Connects wire either parallel or 90 to pipe C00 SERIES Other sizes available, consult factory. U-Bolt Clamps Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT) EA GR-DB GM-DB R E B A R 005 NEC.5(A)(3) requires bonding all present grounding electrodes, including concrete-encased electrodes (Ufer).
7 PAGE 76 GREAVES EXCLUSIVE CONTINUOUS LOOP BONDING & Swimming pools / spas, foundation footings, agricultural buildings and other difficult environments JONES REBAR CLAMP Connect grounding electrode conductor to rebar (concrete encased electrode) Rugged and compact with no awkward projections - easy coverage in concrete Lay-in feature allows continuous-run or termination Cast bronze body with stainless steel hardware The J3-DB handles a range of rebar sizes and wire sizes CSA (C US) certified and UL listed for direct burial in earth or concrete Rebar Clamp J 9-DB J 30-DB J 3-DB ** J 3-DB 8-6 SOL 8 SOL- STR *6 SOL - /0 STR 6 SOL - /0 STR REBAR INCH # 3 / 5 /,,3/,5,6 WEIGHT LBS/ J-series clamps are designed for bare rebar only Installation torque in-lbs **UL pending Do not use on ground rod, pipe, or epoxy-coated rebar *UL listed for # STR - # STR BEAVER TOOTH LUG Use on electrical equipment, pool/spa equipment, conduit bushings, jumper to multiple conduits Copper body, stainless steel screw, for use with copper wire only CSA (C US) certified and UL listed for direct burial in earth or concrete Lay-in Lug BTL -DB BTL -DBP BTL -DB BTL -DBP # - AWG # - AWG # - AWG # - AWG BOLT #0 #0 / / BUGLUGS Heavy duty silicon bronze and copper, tin-plated For use with copper wire only CSA certified for direct burial in earth or concrete BL 6 BL BL BL /0 MAX #6 # # #/0 MOUNTING BOLT #0 / / 5/6 WEIGHT LBS/ DBP is tin-plated for use on aluminum pool structure. Use of oxide-inhibitor is recommended. WEIGHT LBS/ Lay-in Lug 86D 86D Patent Pending Tin-plated for use on aluminum pool structure. Use of oxide-inhibitor is recommended. MESH-BUG Use to connect copper conductor to wire mesh Copper-alloy bronze construction Sizes available for rolled (#0) and heavy (#6) wire mesh UL listed for direct burial in earth and concrete, on copper wire only /6/007 A-DB A5-DB A8-DB MESH SiZE #0 #6 # COPPER COND. (AWG) #STR - #8STR #8 SOL - # STR #0 STR - # STR Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT) Patent Pending 005 NEC.5(A)(3) requires bonding all present grounding electrodes, including concrete-encased electrodes (Ufer).
8 PAGE 77 Jones Bond System ROD CLAMPS For connecting ground wire to ground rod Cast bronze body with silicon bronze bolt, for use with copper wire only UL listed for direct burial in earth and concrete G 9 G 30 G 3 G 3 G 00 G S-DB G S-DB ROD (IN) / 3/ WATER PIPE (IN) / - / - MAX # STR # SOL #/0 SOL # SOL #/0 STR MAX # STR # STR WEIGHT LBS/ PIPE CLAMPS For connecting ground wire to water pipe Cast bronze body, silicon bronze screws, for use with copper wire only UL listed for direct burial in earth and concrete C 0 C 0 C 08 C C 0 C 3 C ROD (IN) / - 3/ 7/8 - IPS PIPE / / - 3/ / 3 WEIGHT LBS/ CABLE #/0 - #/0 - KIT CONTENTS SCREWS WASHERS NUTS FLAT LOCK 00 U-BOLT CLAMPS Heavy Duty U-bolt Clamps Use to connect wire to pipe, rod, or fence posts Cast bronze bodies with silicon bronze hardware, for use with copper wire only CSA NRTL/C Certified for direct burial in earth and concrete Complete C00 Series listed on page 80. PLATING: For tin plating of above items add suffix P to catalog number SS 0-A SS 0-B SS 0-C SS 0-D SS 0-A SS 0-B SS 0-C SS 0-D SCREW L / 0- /-0 3/ / / 3/ / WEIGHT LBS/EA STAINLESS STEEL HARDWARE KITS Sets of stainless steel screws, washers, and nuts Use to mount BTL-DB and BL Series lugs to equipment Each kit packaged in clear plastic display box For larger sizes of stainless steel or silicon bronze hardware see pages -5. KIT WEIGHT LBS/EA LISTED 3C LISTED 3C Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT) Parallel or 90 connection to rod or pipe
9 PAGE 78 I-BEAM CLAMPS To connect grounding electrode conductor to structural I-beam or metal frame Can also be used on fence posts, trailer frames, cable tray, pedestal Series covers a wide range of beam and wire sizes Eliminates drilling structural steel Replaces exothermic welding FIG. FIG. FIG. 3 GBCH High strength copper-alloy bronze casting Steel hardware, zinc plated Bolt penetrates paint or oxide Use to terminate wire For use with copper wire only UL (CU only) GBCA Aluminum body, tin-plated Steel hardware, zinc plated Screw penetrates paint or oxide Dual-rated for copper or aluminum wire Side-entry allows continuous loop Also for sheet metal cable tray UL (CUAL), CSA (CU only) GBC0 High strength copper-alloy bronze casting Steel hardware, zinc plated Clean beam surface for electrical contact Side-entry allows continuous loop run Shape of hook may vary by size For use with copper wire only CSA (CU only) 005 NEC.5(A)() requires bonding all present grounding electrodes, including grounded I-Beams. GBC SERIES 790 GBCH6 BEAM FLANGE (IN) F TH MAX MAX MIN #6 - #AWG DIMENSIONS (IN) W L H 5 /8 3 /6 FIG. 79 GBCA / MAX MCM - #6 7/8 3 / 79 GBC0-3/6 #/0 - STR / 3 / 3 79 GBC0- / #/0 - STR 6 / 3 / GBC /6 #/0 - STR 8 / 3 / GBC0-8 8 #/0 - STR 0 / 3 / 3 Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
10 PAGE 79 ADJUSTABLE STRAPS Adjustable ground straps are made from pure annealed copper Bolts, nuts and washers are plated steel Four sizes cover a ground pipe range of to For copper wire #-6SOL Ground wire connection can be soldered or solderless PIPE HEAVY TYPE.0 THICK, 3/ WIDE 6000 D D D D 83 - LIGHT TYPE.0 THICK, 3/ WIDE 600 D 8-60 D D D 87 - PLATING: For tin plating add suffix letter P to catalog numbers. PERFORATED COPPER STRAP Pure annealed 6 guage copper Holes accommodate / screws, spaced / on center Strap has full round edge WIDTH (IN) THICKNESS (IN) COIL LENGTH 705 D 0 3/.0 0 FT For longer coils consult factory for price and availability. FLEXIBLE BRAID Flexible flat-woven tin-plated copper braid Use to absorb expansion, misalignment, motion, or vibration of equipment Use for bonding or grounding jumpers Use multiple layers to increase ampacity FB SERIES FB00 FB300 FB00 CIRCULAR MIL AREA 77 kcmil 5 kcmil 3 kcmil EQUIV. (APPROX) # AWG 3/0 AWG /0 AWG NOMINAL AMP RATING* INDOOR OUTDOOR DIMENSIONS W T /8 3/6 5/3 * Ampacity varies with service conditions such as environment, airflow, orientation, temperature rise, etc. Also available as finished connectors with endpads; see FJ Series. Also available in bulk quantities. COIL LENGTH 0 FT 0 FT 0 FT Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
11 PAGE 80 U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze Castings for Strength and Ruggedness Use to connect wire to pipe, rod, or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete C00 SERIES C 00 C 0 C 0 C 03 C 0 C 05 C 06 C 07 C 08 C 09 C 0 C 3 C C 5 C 6 C 9 C 0 C C C C 6 C 7 C 8 C 3 C 3 C 33 C 3 C 36 C 37 C 38 C 39 C C C 3 C C 6 C 7 C 8 C 9 C 5 C 5 C 53 C 5 ROD / - 3/ 7/8 - PIPE IPS (O.D.) / (.5) (.675) / - 3/ (.8) - (.05) (.35) / (.66) / (.90) (.375) / (.875) 3 (3.5) 3 / (.0) (.5) For sizes not listed contact factory for price and delivery. PLATING: For tin plating add suffix P to catalog numbers. CABLE - 8 /0 - - /0-8 /0 - - / /0 - - / /0 - - / /0 - - / /0 - - / /0 - - / /0 - - / /0 - - / /0 - - / /0 - - / Connects one wire parallel or perpendicular to rod or pipe Heavy Duty Pipe sizes / to IPS Wire #8 to 0 MCM Applications Water Pipe Metallic Fencing Ground Rods Grounding Grids Rebar Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
12 PAGE 8 LARGE PIPE CLAMPS Extra heavy-duty bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts Clamp first to pipe, then attach wire with cover piece Separate bolts for mounting on pipe and connecting wire High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CG SERIES CG 0 CG 00 CG 60 CG 6 CG 6 CG 6 CG 60 CG 3 CG 3 CG 375 CG 30 CG 36 CG 36 CG 3675 CG 360 CG CG CG 75 CG 0 CG 6 CG 6 CG 6 CG 60 CG 5 CG 5 CG 5 CG 575 CG CG 6 CG 6 CG 6 CG 675 CG 60 CG 70 CG 8 CG 8 CG 875 CG 80 CG 00 CG 0 CG 0 CG 60 PIPE IPS (O.D.) (.375) -/ (.875) 3 (3.5) 3-/ (.0) (.5) -/ (5.0) 5 (5.563) 6 (6.6) 6 Cast ( ) 8 (8.6) 0 (0.75) (.75) (.0) 6 (6.0) CABLE # # - 8 #/0 - - #/ # - #/ # - #/ # - #/ # /0 - # - #/ # #/0 - # - #/ # #/0 - - #/ # # - #/ # # # # # FIG. Sizes for other O.D. or circumference available. For sizes not listed contact factory for price and delivery. PLATING: For tin plating add suffix letter P to catalog numbers. * Not UL Listed APPROX. WT. LB Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT) Connects one wire parallel or perpendicular to pipe Large pipe sizes to 6 IPS Large wire sizes to 000MCM Figure Figure *
13 PAGE 8 U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CW SERIES CW CW 5 CW 0 CW CW 6 CW 7 CW 8 CW 3 CW 33 CW 3 CW 37 CW 38 CW 39 CW CW 3 CW CZ SERIES CZ 0 CZ 05 CZ 08 CZ 09 CZ 0 CZ CZ 5 CZ 6 CZ 0 CZ CZ CZ 6 CZ 7 CZ 8 CZ 3 CZ 33 CZ 3 CZ 37 CZ 38 CZ 39 CZ CZ 3 CZ CZ 7 ROD 5 /8 or 3 / 7 /8 or IPS PIPE / / / 3 IPS PIPE 3 /8 / or 3 / / / / 3 3 / CABLE # - /0 /0 - # - /0 /0 - # - /0 / # - /0 / # - /0 / # - /0 / CABLE # - /0 /0 - # - /0 / # - /0 / # - /0 / # - /0 / # - /0 / # - /0 / # - /0 / # - /0 Connects two cables parallel to pipe Connects three cables parallel to rod or pipe Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
14 PAGE 83 U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CS SERIES ROD IPS PIPE CABLE CS 0 CS 0 / / # - /0 / CS 0 CS 05 or 3/ # - /0 /0-708 CS 08 # - /0 709 CS 09 7/8 or / - 3/ /0-70 CS CS # - /0 75 CS 5 /0-76 CS CS 0 # - / CS CS CS 6 / / # - /0 Connects two cables perpendicular to rod or pipe 77 CS 7 / /0-78 CS CS 3 # - /0 733 CS 33 /0-73 CS RAISED-FLOOR PEDESTAL CLAMPS Pedestal clamp for raised computer-floor grounding grid applications Accommodates one or two grounding wires Install on round or square pedestal, as noted Provides signal reference grid, static ground drain, fault current ground Bronze high-copper alloy body and silicon bronze hardware Suitable for direct burial in earth or concrete CR SERIES T = Throat of U-bolt Connects one or two cables perpendicular to pedestal PEDESTAL TYPE CONDUCTORS NO. DIMENSIONS A B C D T 807 CR07 3/ - ROUND 3/ - 7/8 SQUARE or #8- STR CR08 3/ - ROUND 3/ - 7/8 SQUARE or #-/0 STR CR / ROUND or #-/0 STR Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
15 PAGE 8 FLEXIBLE STRAP SYSTEM PIPE CLAMPS FOR FLEXIBLE STRAPS Bronze high-copper alloy castings For grounding flat flexible strap to fence posts, gates or water pipe For copper strap CF SERIES CF 0 CF CF 5 CF 0 CF CF 30 CF 35 CF 0 CF CF 60 PIPE IPS / / / 3 3 / 5 6 STRAP MAX W FLEXIBLE JUMPER STRAP CONNECTORS Flexible flat woven tin-plated copper braid Seamless high-conductivity tin-plated copper flat ferrules Use to absorb expansion, misalignment, or motion of equipment Use with CF Series clamps to bond fencepost to gate FJ SERIES FJ 00-8N FJ 300-8N FJ 00-8N EQUIV. (APPROX) # AWG 3/0 AWG /0 AWG NOMINAL AMP RATING* INDOOR OUTDOOR NOMINAL DIMENSIONS L W T 8 /8 8 3/6 8 / * Ampacity varies with service conditions such as environment, airflow, orientation, temperature rise, etc. NEMA bolt pattern for () / bolts on 3 / centers. Other configurations and sizes available; consult factory. Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
16 PAGE 85 BAR OR TOWER CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use for grounding cable or wire to a flat bar, plate, or structural steel member High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete For copper wire only TG SERIES TG 0 TG 0 TG TG TG 75 TGM 0 TGM 0 TGM TGM TGM 75 CABLE MAX MIN STR 8 SOL /0 STR SOL MCM /0 SOL 0 MCM 300 MCM 7 MCM 5 MCM STR 8 SOL /0 STR SOL MCM /0 SOL 0 MCM 300 MCM 7 MCM 5 MCM BOLT 7/6 / 7/6 / Connects one ground wire to / thick bar or stanchion TGG SERIES TGG 0 TGG 0 TGG TGG TGG 75 TGGM 0 TGGM 0 TGGM TGGM TGGM 75 CABLE MAX MIN STR 8 SOL /0 STR SOL MCM /0 SOL 0 MCM 300 MCM 7 MCM 5 MCM STR 8 SOL /0 STR SOL MCM /0 SOL 0 MCM 300 MCM 7 MCM 5 MCM BOLT 7/6 / 7/6 / Consult factory for connectors for bar greater than / thick. For tin plating add 0% to above prices and add suffix P to catalog numbers. Connects two ground wires to / thick bar or stanchion Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
17 PAGE 86 CABLE TRAY CONNECTORS CABLE TRAY CLAMP Bronze multi-purpose connector for tray, splice, tap, or cable-end High-copper alloy body Accommodates either one or two conductors Galvanized carriage bolt with square shoulder prevents turning Low profile head provides smooth surface on inside of tray Large contact surfaces to tray and wires for low resistance For use with copper conductor CTGG SERIES CTGG CTGG -P* MAIN TAP -/0 -/0 -/0 -/0 DIMENSIONS (IN) W L 7 /8 7 /8 BOLT -6 X -6 X *CTGG-P is tin-plated for use with aluminum conductor or on aluminum tray, use oxide-inhibitor. Available with silicon bronze hardware, add -BC to catalog number. 0 0 CTGG -P Thru-Grip -TYPE CABLE TRAY CLAMP For grounding applications on wire-basket type cable tray Use to connect single jumper-wire to tray sections Bronze high-copper alloy body Unique design provides lay-in feature quick installation turn prevention Mount on tray-wire perpendicular to ground wire direction Direct wire-to-wire contact provides low-resistance connection Provides smooth surface on inside of tray For copper wire CT9 SERIES CT 9 CT 9-P* TRAY /8-3/6 /8-3/6 CONDUCTOR #0-6SOL #0-6SOL DIMENSIONS (IN) H L / / W Standard screw is round-head, recessed-socket, plated-steel Available with plated steel, slotted-head screw; add -SL to catalog number Available with silicon bronze hex-head screw; add -BH to catalog number *CT9-P is tin-plated SCREW /-0 X 3/ /-0 X 3/ Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
18 PAGE 87 BOND STUDS Lay-in connector for continuous loop grounding Use to ground or conductors to bar or plate High copper bronze alloy for maximum conductivity Suitable for direct burial in earth or concrete BS SERIES BS -7 BS -5 BS -3 BS - BS -0 BS -0 BS -0 BS -7 BS -5 BS -3 BS - BS -0 BS -0 BS -0 MAX. SOLID STRND. ONE MAXIMUM /0 /0 3/0 /0 /0 STUD THREAD LENGTH / - 0 / 5/6-8 9/ / -3 3/ / -3 3/ - TWO MAXIMUM S 6 7 / -0 / 5 5/6-8 9/ /0 /0 / -3 3/ 3/0 /0 / -3 3/ /0 - For sizes not listed consult factory for price and delivery. Bronze nuts, flat washers and lockwashers available, see pages & 3. PLATING: For tin plating add suffix P to catalog numbers. For longer stud add suffix L to catalog numbers, consult factory for price and availability CONTINUOUS LOOP Lay-in Lug for Grounding or Continuous Loop Bonding Use on electrical equipment, conduit bushings, jumper to multiple conduits Heavy Duty - Bronze castings for strength and ruggedness High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete, copper cable only LAY-IN LUGS BTL -DB BTL -DB J AR-DB J 3AR-DB J AR-DB J 5AR-DB J 6AR-DB J 7AR-DB J 8AR-DB MATERIAL BODY SCREW COPPER BRONZE STAINLESS BRONZE # - # - #- #/0 - /0 #/0 - /0 3 - / BOLT #0 / / / / / / BTL-DB JAR-DB Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
19 PAGE 88 STATIC CLAMPS For Vehicle and RR Tanker Quick Disconnect Type For grounding gasoline trucks, tank cars, aircraft to drain static electricity Chain-type yoke causes automatic release if vehicle moves High strength cast bronze alloy clamps, with corrosion resistant components Hard conical teeth penetrate oxidized or painted surface for positive contact Accommodates flexible rubber-sheathed cable from # - AWG TEETH MATERIAL 7360 GQD-S # - AWG Stainless GREAVES EXCLUSIVE CONTINUOUS LOOP STORAGE DRUM CLAMP For Bonding and Grounding 55 Gallon Steel Storage Drums DRUMBUG Provides solid connection to storage drum rim Clamp attaches quickly to bonding wire and to drum rim Cup point set screw tightens to penetrate rust or paint on drum rim Removable and reusable Corrosion-resistant cast bronze body, stainless steel hardware 73 DB #6-8 AWG Guilford, Connecticut 0637 Area Code Fax TOLL FREE (Outside CT)
REA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
More informationF4P lay-in lugs SERIES SPECIFICATION
F4P lay-in lugs SERIES SPECIFICATION Lay-in lugs are ideal for both grounding and continuous loop applications. Made of aluminum alloy and tin plated for low contact resistance, they are suitable for use
More informationQTY 7/374 8/346 11/375 12/348 17/298 18/324 19/ / /472 24/473 3 QTY
PAGE 20 BUTT SPLICES - COPPER Produced from high conductivity seamless copper tubing Marked with die index and color coded Tin plated to provide corrosion resistance SC SERIES Standard Barrel 5808 SC 8
More informationIndex GROUNDING CONNECTORS. TYPE WB Ground Rod Clamps. TYPE G/SRC Ground Rod Clamps. Heavy-Duty Clamps. Standard-Duty Clamps (Universal)
TYPE B Ground Rod Clamps Heavy-Duty Clamps GROUNDING CONNECTORS R30117 For direct burial. For connecting ground wire to driven rod. Designed to maintain proper alignment between ground wire and rod. Cast
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More informationPhone: Fax:
SEPTEMBER 2007 www.nsiindustries.com Phone: 800.321.5847 Fax: 800.841.5566 Mechanical Connectors Dual Rated Single & Double Lugs........................ 1 Panelboard Lugs............................ 1
More informationNYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017
SECTION 27 05 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 260526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section
More informationSECTION GROUNDING AND BONDING
SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and
More informationSECTION GROUNDING
SECTION 16450 GROUNDING PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies general grounding and bonding requirements of electrical and telecommunication installations for personnel safety, equipment
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationthermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE
The Contractors Choice the Contractors Choice Founded in 1958, with locations in Tulsa and Broken Arrow, Oklahoma. is part of the Quality Brands of Continental Industries. TABLE OF CONTENTS THE PROCESS...4
More informationUNDERGROUND SERVICES SECONDARY
Reference UNDERGROUND SERVICES SECONDARY Underground services secondary... U- 1 General requirements for underground service... U- 2 Name of parts for underground service... U- 3 Conduit layouts... U-
More informationCHAPTER 13 GROUNDING AND BONDING
GROUNDING AND BONDING CHAPTER 13 GROUNDING AND BONDING Grounding and bonding must be in accordance with Article 250 of the National Electrical Code (NEC). Bonding is defined in the NEC as the permanent
More informationSECTION PART 1 GENERAL
SECTION 16060 GROUNDING AND BONDING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Grounding of electrical systems and equipment and basic requirements for ground for equipment, circuits, and systems.
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide labor, materials, equipment, and incidentals as shown, specified, and
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / 11-14
SECTION 270526 - GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationFAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required
More informationWater & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
More informationWind Power Solutions. Company Registration No: Vat Registration No.:
Wind Power Solutions Foundation Grounding and Construction, Bonding, Power Connections, Surge Protection, and Lightning Protection ERICO offers a complete range of foundation grounding and construction,
More informationTEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
More informationSECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
More informationService Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
More informationCONTENTS. B. System Design and Performance Requirements
16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or
More information1. Hangers and supports for electrical equipment and systems.
PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...
More informationNew Product Flyer Introduction
Dec. 5, 2013 New Product Flyer Introduction Preferred Lightning Protection, Inc. is excited to introduce our newest products and capabilities. Following are several new products with current inventories
More informationSECTION GROUNDING AND BONDING
SECTION 16060 GROUNDING AND BONDING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationFlextray - Accessories
Flextray - 40 Flextray - Protects cable from debris and dust Adds security to cable installation Easy bend-over tabs secure cover to trays Available for 2 (50mm) to 24 (600mm) wide trays Comes in 118 (2997mm)
More informationExpansion & Deflection Fittings. SOLUTIONS for the Construction Industry
Expansion & Deflection Fittings SOLUTIONS for the Construction Industry TTINGS FI ST D LO C AF/AF8 SERIES e st d, in M a c h e d, As d in D e s i g n e d, b le the Casted Body with NPT hub size se m Ca
More informationSECTION GROUNDING AND BONDING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 25 05 26 GROUNDING AND BONDING A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationTable of Contents. Connector Manufacturing Co. US Page 1
Table of Contents 2AB2 15 2AB 15 2ABV 20 2BC 39 3AB2 17 3AB4 17 3ABV 20 4ABV 20 6ABV 20 A A1B2 13 A2B2 16 A3B2 18 A4B4 19 AB-50-S 11 AB-70-S 11 AB-112-R 12 AB-112S 11 AB-125-R 12 AB-125S 11 AB-250S 11
More informationPipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More
Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products
More informationA veteran-owned company
GALVAN Electrical Products Catalog galvanelectrical.com A veteran-owned company TAbLE of CoNTENTS by Product Category Ground Rods.................................... 6-9 Ground Plates & Ground Rod Driver...................
More informationELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS
Greenbook Prepared by: ABB1 ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS 052521 Asset Type: Electric Metering Function: Construction Issued by: Quoc Hoang (QxH1) Date: 08-15-17 Rev. #06:
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Updated format, division title, and removed references to other sections. - mgl44 A. Summary This section contains design criteria for the
More informationGeneral Terms and Conditions
General Terms and Conditions MINIMUM ORDER CARGE PER ITEM $200.00 PRICES All prices are subject to change without notice and orders will be billed at prices in effect at the time of shipment. TRANSPORTATION
More informationRESIDENTIAL QUICK REFERENCE
RESIDENTIAL QUICK REFERENCE PROVO CITY POWER STANDARDS ELECTRICAL ENGINEERING UPDATED: 2016 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION. 18" MIN. OF TAIL. (NEUTRAL CONDUCTOR MUST BE WHITE OR
More informationA. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
More informationSECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
More informationSEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets Seismic Frame Two-Post Rack Page 11-3 Seismic Protection Products - Racks Page 11-6 Seismic Protection Products - Runway Page 11-8 Seismic
More informationFixings, bonds and clamps
Square tape clamp Material 25 x 3mm Copper 0.12kg CT105-H 25 x 6mm Copper 0.30kg CT110-H 50 x 6mm Copper 0.60kg CT115-H Manufactured from high quality copper and aluminium alloys. Simple to install, providing
More informationPATHWAYS FOR COMMUNICATIONS SYSTEMS
270528 PATHWAYS FOR PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, and equipment for the complete installation of work called for in the Contract Documents. 1.2 SCOPE OF WORK A. This
More informationLIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES
LIGHTNING PROTECTION SYSTEM EARTHING SYSTEM ELECTRICAL ACCESSORIES AIR TERMINAL AIR TERMINAL FIXING BASE (flat) Material Aluminium / Copper Model Al-300-16 / Cu-300-16 Model Al-16 / GM-16 Diameter 16mm
More informationWind Power Solutions CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
Wind Power Solutions CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER Foundation Grounding and Construction, Bonding, Power Connections, Surge Protection, and Lightning Protection nvent offers a complete range
More informationSERVICES CHAPTER 35. wire. For all other installations, the rating of the ungrounded conductors shall be not less than 60 amperes.
CHAPTER 35 SERVICES SECTION E3501 GENERAL SERVICES E3501.1 Scope. This chapter covers service conductors and equipment for the control and protection of services and their installation requirements. E3501.2
More informationSTANDARD SPECIFICATION EARTH GROUNDING Section (Straight Shaft Model)
STANDARD SPECIFICATION EARTH GROUNDING Section 16000 (Straight Shaft Model) PART 1 - GENERAL 1.01 DESCRIPTION A. Related Work Specified Elsewhere: 1. Electrical General Provisions ( Section xxx) 2. Basic
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More informationWelding Accessories
Welding Accessories www.airliquide.ca 1-800-817-7697 Welding Accessories BLUESHIELD Welding Cables Blueshield Welding Cables: Excellent flexibility (stays flexible at -50 C) Abrasion resistant Oil, solvent
More informationTABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
H W U J B L T Substation Bolted TABLE OF CONTENTS COPPER SUBSTATION Introduction............... L-3 Type HFBW Bar Clamp............... L-13 Type NT Tube to Tube.............. L-4 Type HFB-P1 Bar Clamp...............
More informationSECTION CHAIN LINK FENCING
SECTION 02835 - CHAIN LINK FENCING 1.0 GENERAL 1.1 Furnish and install chain link fencing complete in place with gates and accessories as specified herein and as shown on the Contract Drawings. 1.2 Reference
More informationNORTHEASTERN REMC ELECTRIC STANDARDS MANUAL
NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL WARNING Before digging or trenching... Call 811 Indiana Underground Protection Service 1-800-382-5544 AVOID BURIED POWER CABLES 4901 East Park 30 Drive P.O.
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationCompression Grounding Copper E Crimps
ELT Compression Grounding Copper E Crimps Manufactured from copper alloy Clearly marked with wire size and die index Range taking UL Listed and CSA Certified for grounding and bonding May be used in ground
More informationSECTION SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION
SECTION 16-372 SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION 1. GENERAL SPECIFICATIONS The work of this Section includes furnishing all labor, equipment, materials (unless specifically identified as Owner-furnished)
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationTOLCO Fire Protection Support Systems. Pipe Hangers Supports Seismic Bracing. UL Listed FM Approved for Fire Sprinkler Installations
TOLCO Fire Protection Support Systems Pipe Hangers Supports Seismic Bracing UL Listed FM Approved for Fire Sprinkler Installations Revision 12/06/2007 Catalog Forward This catalog has been created with
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationSuperstrut. Metal Framing. Pipe Straps, Pipe Clamps and Hangers
Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the American Standard Code for Pressure Piping. Hanger Design Pipe hangers are of advanced design
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationPART 4 ORANGE SECTION
PART 4 ORANGE SECTION BOLTED CONNECTORS BOLTED CONNECTORS 4-1 AERIAL CONNECTORS ALUMINIUM SERVICE TAP SL-4/12 SL-7/19 Conductor Range Run Diameter Tap Diameter 7/3.00 to 9mm to 7/1.75 to 7/4.75 14.3mm
More informationCITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS
CITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS PART 1 - GENERAL 1.01 SUMMARY A. Section Includes furnishing and installing chain-link fabric fence, gate, and appurtenances. 1.02
More informationROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING
ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity
More informationFitTech UP171F ELLIPTICAL (FOOTING) UP171I ELLIPTICAL (IN GROUND) UP171S ELLIPTICAL (SURFACE) Parts List
ELLIPTICAL BASE COVER DESCRIPTION FOOTBUCK WELD ASS'Y HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER (" O.D.)
More information4CS12 4CS-1/2 4X1-7/8D Handybox. Features. Dimensions and Weight. Long Description. Catalog Number
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 4CS12 4CS-1/2 4X1-7/8D Handybox Appleton/Oz Gedney Catalog Number 4CS12 Manufacturer Appleton/Oz
More informationANDERSON HUBBELL POWER SYSTEMS FARGO
REFERENCE DATA ALUMINUM AND BRONZE CONNECTORS...-1 RECOMMENDED TYPES OF HARDWARE AND INALLATION MOUNTING... - AMPACITY RATINGS, BOLTED PAD CONNECTIONS...-5 CATALOG NUMBER SUFFIXES FOR SPECIAL FEATURES...
More informationFAST-09. Flextray F.A.S.T. System The Next Generation RF Solution
FAST-09 Flextray F.A.S.T. System The Next Generation RF Solution Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required for
More informationMetering Installations for Mobile Homes or Mobile Home Parks:
Metering Installations for Mobile Homes or Mobile Home Parks: Overhead Installations The metering pole must be a minimum of 17 ft, Class 5 pole set at least 4 ft deep so that it will be of sufficient height
More informationA. All materials shall be tested and listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).
16450 GROUNDING ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 05 26 An optional keynote to the
More informationCustomer Owned Meter Enclosures for Self-Contained Watthour Meters
Revision No. 4 Page 1 of 15 SPECIFICATION Page 2 of 15 RECORD OF SPECIFICATION APPROVALS: This Specification is approved for the inclusion of subject products on the Florida Meter Group s Approved Metering
More informationSECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationFitTech UP166F CHEST PRESS (FOOTING) UP166I CHEST PREES (IN GROUND) UP166S CHEST PRESS (SURFACE)
CHEST PRESS BASE COVER DESCRIPTION FOOTBUCK WELD ASSEMBLY HARDWARE COMPLETE HARDWARE COMPLETE HARDWARE COMPLETE /" ANCHOR ROD 3/" x " HEX HEAD CAP SCREW 3/" WEDGE ANCHOR 3/" ANCHOR BOLT 3/" FLATWASHER
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 27 0526 - TECHNOLOGY GROUNDING SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENT A. Drawing and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specifications,
More informationElectrical Services Standard Specification Cable Tray Installation. May For ROYAL HOLLOWAY UNIVERSITY OF LONDON
Electrical Services Standard Specification 4.0 - Cable Tray Installation May 2010 For ROYAL HOLLOWAY UNIVERSITY OF LONDON Prepared For The Estates Division By: Hulley & Kirkwood Consulting Engineers Ltd
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 260548 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationGENERAL NOTES PEDERNALES ELECTRIC COOPERATIVE, INC. RESIDENTIAL AND COMMERCIAL AMP METER LOOP SPECIFICATIONS
GENERAL NOTES 1. Residential and commercial meter loops are typically used when constructing facilities for permanent service. It is important that all guidelines outlined in this document be followed
More informationWasher, Electrical Equipment Bond. WEEB Patent Pending INSTALLATION INSTRUCTIONS. For POWER-STRUT Mounting System only
Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For POWER-STRUT Mounting System only Please read carefully before installing. Burndy LLC recommends that the sufficient details
More informationFor Silverback Solar
Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For Silverback Solar Please read carefully before installing. Wiley Electronics recommends that the sufficient details of
More informationThe University of Texas at Austin September 30, 2011
SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 SUMMARY A. This section governs the products and execution requirements relating to furnishing and installing grounding and
More informationSection 2 Index PAGE 2-I. Metal Sheath and Ceramic Thermocouple Assemblies. AccuTru Sensor Technologies 2-1. Spring Loaded Hex Nipple w/ Head 2-2
Section 2 Index Model Metal Sheath and Ceramic Thermocouple Assemblies Page I1 GTAW Welded Hex Nipple w/ Head 2-1 I2 Spring Loaded Hex Nipple w/ Head 2-2 I3 Spring Loaded Pipe Nipple w/ Head 2-3 I4 Nipple-Union-Nipple
More informationCONSTRUCTION SPECIFICATION FOR GROUNDING
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 609 NOVEMBER 2001 CONSTRUCTION SPECIFICATION FOR GROUNDING TABLE OF CONTENTS 609.01 SCOPE 609.02 REFERENCES 609.03 DEFINITIONS - Not Used 609.04 DESIGN
More informationSECTION (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 48 (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.01 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-28 05 26.00 40 (August 2016) --------------------------------- Preparing Activity: NASA Superseding UFGS-28 05 26.00 40 (August 2013) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationModular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
More informationPV Mounting System 2703 SERIES 200 UL GROUND MOUNT SYSTEM. SnapNrack Residential PV Mounting Systems Code Compliant Installation Manual
PV Mounting System 2703 SERIES 200 UL GROUND MOUNT SYSTEM SnapNrack Residential PV Mounting Systems Code Compliant Installation Manual Series 200 UL Introduction Series 200 UL Introduction SnapNrack Series
More informationProcurement Services SVC East Fowler Avenue Tampa, Florida (813)
Procurement Services SVC 1073 4202 East Fowler Avenue Tampa, Florida 33620 (813) 974-2481 Web Address: https://www.usf.edu/business-finance/purchasing/public-bids/rfi.aspx October 12, 2018 Invitation to
More informationDB10 BLTD C10 Pipe Support. Description. Manufacturer Information BOLTED FRAMING GTIN UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DB10 BLTD C10 Pipe Support Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category
More informationMechanical Connectors Product Overview
Product Overview......................... 40 Split-Bolt Connectors.................. 4-44 Service Post Connectors................ 4-46 Mechanical Service Entrance Connectors...... 4 Parallel Groove Connectors.............
More informationSECTION VIBRATION CONTROLS FOR PLUMBING PIPING AND EQUIPMENT
Page 220548-1 SECTION 220548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSTOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,
More informationTEMPORARY FACILITIES
MUNICIPAL LIGHT & POWER & CHUGACH ELECTRIC ASSOCIATION ELECTRIC SERVICE REQUIREMENTS EXCERPT TEMPORARY FACILITIES 2015 EDITION Effective August 3, 2015 This is an EXCERPT; the complete book is available
More information