Rack & Pinion Rotary Actuators Single, Double, and Integral Air/Oil Tandem Rack & Pinion Mini Rotary Actuators (ø1/2" & 3/4" Bores)
|
|
- Andrea Logan
- 5 years ago
- Views:
Transcription
1 ctuators Rack & inion Rotary ctuators ingle, ouble, and Integral ir/oil Tandem Rack & inion Mini Rotary ctuators (ø1/2" & /4" ores) ingle Rack and inion Mini Rotary ctuators are very compact. Rotation angles 45, 90, and 180 standard. Nitrile Noise ampening umpers optional. Viton eals optional for higher temperatures. Optional Low riction eals. ody Mount or optional ngle racket, ront and Rear lange Mountings. Technical data Medium: iltered compressed air to 150 I (10 ar) Operating Temperature: -20 to 200 (-29 to 9 ) with tandard Nitrile eals -20 to 400 (-29 to 204 ) with Viton eals -20 to 250 (-29 to 121 ) with Low riction eals Operating ressure: 150 I (10 ar) ngle of Rotation: 45, 90, 180 tandard Other rotations available Rotational Tolerance: /2 acklash etween Rack & inion: 2 position units less than 1 of arc maximum NOT: or 0 backlash at each end of rotation, specify a double rack actuator with rotation adjustments. Lubrication: None required Norgren Rotary ctuators are rated for no lube added service. ll internal components are lubricated at the time of assembly with a Teflon based grease. Recommended fluid for air/oil tandem is petroleum based hydraulic oil, non-foaming, non-detergent IO Viscosity grade of 46. Materials nd aps: lack anodized 6061-T6 aluminum ody: 6061-T6 aluminum alloy, entirely black anodized ear Rack: round and polished stress proof steel inion ear and Output haft: Manufactured as one piece from high strength steel. haft earings: 841 ronze tandard eals: Nitrile Ordering information Model codes ore 1/2" 0 /4" 1 Rack/Rotary Type ingle Rack tandard eals 0 ingle Rack Low riction eals 1 ouble Rack Low riction eals 2 ouble Rack tandard eals 5 ouble Rack Integral /O 7 Tandem tandard eals (ø /4" ore only in mini rotary) Multiple osition ctuator 2 ositiono Rotation Output haft ingle nd Keyway tandard ouble nd Keyway Mounting tandard 1 ront lange 2 Rear lange ngle racket V Options No Option0 lectroless Nickel Viton eals V (pecify) witches N/ 0 Rotation djustments No djustment 1 nd ap 2 nd ap nd aps & 4 nd aps & 5 umper No umpers nd ap nd ap ll aps low ontrols N/ ushions N/ ort & Location ort osition 1 * ort osition 2 ort osition ort osition 4 ort osition 5 *tandard ort Location ML: Mini Rotary ctuator /4" ore ouble Rack Integral ir/oil Tandem Mini Rotary ctuator 2 osition 180 Rotation ouble nd Keyway Output haft ront lange Mounting ort osition 2 No umpers Rotation djustment nd aps & Viton eals. T-116
2 asic imensions ingle Rack and inion Mini Rotary ctuator ap.125 x.06 eep ap (22.5) lso ounterbore on oth ides for #10 ocket Optional ouble ead ap crew nd Output haft ore øk 1/2".50 (89) 1.06 (27) 1.00 (25) 1.50 (8).59 (15).75 (9.5) 10-2 /4" 4 (124) 1.25 (2) 1.25 (2) 2.00 (51).69 (18).500 (12.70) 1/8 NT asic imensions ouble Rack and inion Mini Rotary ctuator with Integral ir-oil Tandem 1 Rack & inion Rotary ctuators ingle, ouble, and Integral ir/oil Tandem Rack & inion Mini Rotary ctuators (ø1/2" & /4" ores) ap /.125 x.06 eep ap / lso ounterbore on oth ides for #10 ocket ead ap crew asic imensions ouble Rack and inion Mini Rotary ctuator (22.5) Optional ouble nd Output haft ore øk 1/2".75 (95) 1.06 (27) 1.00 (25) 2.50 (64) 1.25 (2).75 (9.5) 1/8 NT /4" 4.75 (121) 1.25 (2) 1.25 (2).00 (76) 1.50 (8).500 (12.70) 1/8 NT x.06 eep ap / (22.5) 1 ir/oil esevoir lso ounterbore on oth ides for #10 ocket ead ap crew Optional ouble nd Output haft ore øk /4" 5.75 (121).125 (8) 1.25 (2) 1.25 (2).00 (76) 1.50 (8).500 (12.70).1/8 NT ort ositions ingle Rack ort ositions ouble Rack without Rotation djustment ort ositions Integral ouble Rack ort ositions ouble Rack with Rotation djustment ingle Rack ouble Rack Integral ir/oil Tandem ouble Rack ap ap ap / ap / ap / T-117
3 ctuators Rack & inion Rotary ctuators ingle, ouble, and Integral ir/oil Tandem Rack & inion Rotary ctuators (ø1-1/2" & 2-1/2" ores) eatures ingle Rack and inion Rotary ctuators are designed for non-lube added service. Rotation angles 45, 90, 180, 270, and 60 standard. Urethane Noise ampening umpers optional. Viton eals optional for higher temperatures. Optional Low riction eals. ody Mount or optional ngle racket, ront and Rear lange Mountings. djustable ushions optional low ontrols Optional Intregal ir/oil optional Technical data Medium: iltered compressed air to 150 I etroleum based hydraulic fluid to 400 I Operating Temperature: -20 to 200 (-29 to 9 ) with tandard Nitrile eals -20 to 400 (-29 to 204 ) with Viton eals -20 to 250 (-29 to 121 ) with Low riction eals Operating ressure: 150 I (10 ar) 400 I (27.6 ar) ydraulic (non-shock) ngle of Rotation: 45, 90, 180, 270, 60 tandard ny rotation up to 1080 can be supplied Rotational Tolerance: acklash etween Rack & inion: 1-1/8" ore 2 position units 1 of arc maximum 1-1/2" 2-1/2" ore 2 position units 0 minutes of arc maximum Lubrication: None required Norgren Rotary ctuators are rated for no lube added service. ll internal components are lubricated at the time of assembly with a Teflon based grease. hould additional lubrication become necessary between the radial surface of the rack gear and the rack/pinion mesh area due to severe operating conditions, a grease fitting is provided. Materials nd aps: lack anodized 6061-T6 aluminum ody: 6061-T6 aluminum alloy, entirely hard coat anodized ear Rack: round and polished stress-proof steel inion ear and Output haft: Manufactured from high-strength steel. haft earings: ealed, single row ball bearings tandard eals: Nitrile Tube: 606-T82 aluminum alloy Tie Rods: tress-proof steel loating istons: olid aluminum alloy T-118 Ordering information Model codes M ore 1-1/8" 2 1-1/2" 2" 4 2-1/2" 5 Rack/Rotary Type ingle Rack tandard eals 0 ingle Rack Low riction eals 1 ouble Rack Low riction eals 2 ouble Rack tandard eals 5 tandard ir/oil Tandem 6 Integral ir/oil Tandem 7 Multiple osition ctuator 2 osition0 osition 4 osition4 5 osition5 Rotation Output haft ingle nd Keyway tandard ouble nd Keyway ollow Internal Keyway ross Keyway reloaded Keyway Mounting tandard 1 ront lange 2 Rear lange ottom lange 4 ort Location osition tandard * Oversized J K *tandard ort ize and Location. ML: 11/8" ore ouble Rack with tandard eals 2 osition Rotary ctuator 180 Rotation ouble nd Keyway tandard Mounting tandard ort Located at osition 2 ushion osition 1 in nd ap No low ontrols umpers on ll aps nd ap Rotation djustments tandard Magnetic iston Option lectroless Nickel lated. Options No Option0 lectroless Nickel O-Ring Loaded iston eals Viton eals V (pecify) Magnetic Option No Magnet 0 tandard Magnetic iston M in osition & Integral ir/oil Tandems in osition & Rotation djustments No djustment 1 nd ap 2 nd ap nd aps & 4 nd aps & 5 Note: tandard rotation adjustments provide 0 of angle reduction. umper No umpers nd ap nd ap ll aps low ontrols Needle osition No low ontrols nd ap nd ap J K nd aps & M N R Note: low ontrols must be 90 to ort Location. low controls are tandard on all ir/ Oil Tandems. tandard ir/ Oil Tandem low ontrols are in end caps & in position #2. Integral ir/ Oil Tandem low ontrols are in position #5. ushions Needle osition No ushions nd ap nd ap J K nd aps & N M R Note: ushions & Rotation djustment cannot be located in same end cap.
4 Rack & inion Rotary ctuators ingle, ouble, and Integral ir/oil Tandem Rack & inion Rotary ctuators (ø1-1/2" & 2-1/2" ores) asic imensions for ingle and ouble Rack and inion Rotary ctuator ap ap imensions in inches (mm) L M Keyway Retainer late Optional Mounting oles O Thds. U eep (4) I Mounting oles R Thds. T eep (4) N Remove the (4) Retainer late crews to use the Mounting oles on either side of the body. J Q ap ap L M Keyway Retainer late Optional Mounting oles O Thds. U eep (4) I ap Mounting oles R Thds. T eep (4) N imension egree Rotation 1-1/8" ore ingle Rack 1-1/2" ore ingle Rack 2" ore ingle Rack 2-1/2" ore ingle Rack (114) (165) (197) (20) (142) (204) (259) (265) (167) 9.97 (29) (15) (21) (217) (08) (427) (4) (267) 147 (78) (58) (545) (16) (448) (650) (657) dd per.0218 (0.55).005 (0.77).0489 (1.24).0489 (1.24).12 (7.92).500 (12.70).688 (17.48) (25.40) (57) (70) (102) (102).09 (2.6).125 (.18).187 (4.75).187 (4.75).625 (16) (25) (25) (25).047 (1.19).060 (1.52).09 (2.6).09 (2.6).875 (22) (44) 2.01 (52) 2.01 (52).24 (5.94).250 (6.5).500 (12.70).500 (12.70) (57) (68).718 (94).718 (94).250 (6.5).250 (6.5).47 (11.10).47 (11.10) (8) (51) (64).000 (76).500 (12.70).750 (19.15) (28.58) (28.58).12 (84) 4.75 (111) (168) (168) (42) (56).02 (84).02 (84) I (61).187 (81) (124) (124) J (25) (8) (8) (8) øk.500 (12.70).875 (22.2) (28.58) (28.58) L.625 (16) (8) (67) (67) M 1/8 x 1/16 /16 x /2 1/4 x 1/8 1/4 x 1/8 N (8) (8) (51) (51) O 1/4-20 1/4-20 7/ / /8 NT 1/4 NT 1/4 NT 1/4 NT Q.45 (12).594 (15).86 (22).86 (22) R 1/4-20 5/ /2-20 1/ (6).250 (6).75 (10).75 (10) T.250 (6).1 (8).500 (1).500 (1) U.250 (6).48 (11).48 (11).48 (11) ap Remove the (4) Retainer late crews to use the Mounting oles on either side of the body. J T-119 Q
5 ctuators Rack & inion Rotary ctuators ingle, ouble, and Integral ir/oil Tandem Rack & inion Rotary ctuators (ø1-1/2" & 2-1/2" ores) 4-osition Rotary ctuator R = Rotation of base unit in degrees (ositions 1 and 4) = hange in rotation of base unit (osition 2) T = hange in rotation of base unit (osition ) ap 5-osition Rotary ctuator R = Rotation of base unit in degrees = hange in rotation of base unit (osition 2) T = hange in rotation of base unit (osition ) Z = hange in rotation of base unit (osition 4) osition Rotary ctuator ap haft Options Internal Keyed ollow haft can be utilized from either side and is flush with retaining plates. 2" bore 1.00" (25.4) hollow-optional 2-1/2" bore.688" (17.48) hollow-optional ross Keyed haft protrudes from retainer dimension lush with Retainer urface Retainer urface OITION #2 9 ap 4 osition Rotary ctuator (R + ) + ap (R x ) + (R + ) + ap 1 ap ap OITION #1 Output haft ressurize ort(s) OITION #2 9 OITION # 18 osition Number in ap(s) xhaust 1 ll other ports 2 & ll other ports ll other ports OITION #1 OITION # 18 ap 1 ap 1 ap ap (R + T ) + (R + ) + 5 osition Rotary ctuator (R + Z ) + (R x ) + (R + ) + ap ap ap 1 OITION #4 27 Output haft ressurize ort(s) osition Number in ap(s) xhaust 1 ll other ports 2 1 & 1 ll other ports & ll other ports 4 ll other ports OITION # OITION # 125 OITION #1 ap 1 ap (R + T ) + ap (R + T ) + ap 1 OITION #5 27 OITION # Output haft ressurize ort(s) osition Number in ap(s) xhaust 1 ll other ports 2 1 & 1 ll other ports & ll other ports 4 1 & 1 ll other ports 5 ll other ports T-120
ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4
ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...
More informationDM/..., DC/95000, DM/..., DC/96000
D/..., DC/95000, D/..., DC/96000 Compact cylinders Single acting Ø 12 to 50 mm ight weight Compact design, which is considerably shorter than IS/VD or NF equivalent. ow friction characteristics for high
More informationEpoxy Coated F.R.L.Units
093-001I Issued: ep 09 orporation of merica 10100 oulevard oblesville, 46060 www.smcusa.com.. Information poxy oated.r..nits 1/31/-***-*-X1 //-***-*-X40 R//-***-*-X4 //-***-*-X40 //-***-*-X4 //-***-*-X13
More informationNC9 Series Medium-Duty Pre-Lubricated Pneumatic Cylinders
P- N Series Medium-Duty Pre-Lubricated od Lock N ontents Specifications... ord Order ode... Mounting Dimensions...- Spherical earing Mount...0- ylinder ccessories... Double od Models... lignment oupler...
More informationMaterial Handling Bearings. Grade 10 Balls Nylon Retainer. Riveted Nameplate. Plug *optional grease fitting in box
Mtd. Material andling Sealmaster Material andling Mounted Sealmaster material handling mounted ball bearings feature cast iron housings, an extended inner race insert bearing with ball riding nylon retainer.
More informationParticulate Filters. Filter Function. Exclusive Dense Pack Element Design. Optional Components
Particulate ilters Inlet Outlet Monnier particulate filters remove solid and liquid contaminants from compressed air. The proper selection and use of compressed air filters will prevent many short and
More information½ -12 / DN 15- DN 300 ASME
NTH ONTROLS Pneumatic ctuators & all Valves loating all Valves s ½ 1/ DN DN 0 SM 1, 0, 00 & 0 ull and LOTING LL VLVS ** TURS 1. Top lange Top lange is designed as per N ISO 52 for direct mounting od actuators
More informationVALVES. Prospector Series Poppet Valves 1/4" to 2" Air Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves
2 High flow - Cv of 1.2 to 49.5 Durable, robust construction Two mounting styles: inline or subbase 1/4" to 2" ports (SPP or PTF threads) Wide range of ir Pilot Operators available Four functional types:
More informationROD END & SPHERICAL BEARING
319 The Motion-Transfer Specialists RO EN & SPERIL ERING TLOG & RESOURE GUIE OMMERIL MILITRY IRRFT UROR ERING OMPNY ontents Page No. asic Information...4-7 Inch Rod End and Spherical earings SPM & SP Male
More informationFS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
More informationThe Motion-Transfer Specialists
503 The Motion-Transfer Specialists Page No. Engineering ata - Product Information...3-5 ommercial/industrial Units RO ENS SPM, SP Male Molded Race Series...6 SP, SPG Female Molded Race Series...7 M, Male
More informationNC9 Series Medium-Duty Pre-Lubricated Pneumatic Cylinders
P- Medium-Duty Pre-Lubricated od Lock ontents Specifications... ord Order ode... Mounting Dimensions...- Spherical earing Mount...0- ylinder ccessories... Double od Models... lignment oupler... ccessories...
More informationTemperature Regulator Series
Temperature Regulator 91000 Series The Self-Op 91400 pictured Self-Operating esign Indicating, Non-Indicating or Safety Models vailable eavy uty ie Cast luminum ousing 1 /2" thru 6" Valve Sizes The Series
More information12D SERIES THREE SCREW PUMPS ROTARY SCREW PUMPS
TM 12D SERIES THREE SCREW PUMPS ROTARY SCREW PUMPS The reliable pump people Performance Shown at 2000 PSID (138 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 3500 *Bi-metal construction only 50 HZ: 960 1450
More informationSQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The SERIES 90 knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as: Power
More information91000 Series Temperature Regulator
TEMPERTRE REGLTORS 91000 Series Temperature Regulator The Self-Op (Self-Operated Temperature Regulator) Indicating ial (Model 91400 only) ctuator istributed By: M&M Control Service, Inc. www.mmcontrol.com/trerice.php
More informationO V E R V I E W O V E R V I E W OPW
O V E R V I E W O VERVIEW OPW Engineered Systems manufactures swivel joints for a broad range of uses in the chemical, petroleum, petrochemical, refining, mining, distilling, brewing, ink and paint industries,
More informationRCI 400 Series Actuators
PNEUMATIC RCI 400 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 400 Series offers a lower cost alternative to our highly successful scotch yoke design. The addition of this product broadens
More information91000 Series Temperature Regulator
91000 Series Temperature Regulator The Self-Op (Self-Operated Temperature Regulator) TEMPERTRE REGLTORS Indicating ial (Model 91400 only) ctuator Thermal System: Capillary & Sensing Bulb Self-Operating
More informationALPHAIR PNEUMATIC ACTUATORS
September 201 ALPHAIR PNEUMATIC ACTUATORS 90 - I Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The
More informationALPHAIR PNEUMATIC ACTUATORS 120 Y SERIES X SERIES
ALPHAIR PNEUMATIC ACTUATORS Y SERIES - 18 X SERIES ALPHAIR AP-Y () AND AP-X (18) SERIES pneumatic actuators are made by the best manufacture experience on design, material, machining, assembly. The internal
More informationHLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting
FH G G S F J H2 LB2 N/ S/F Specifications Thin parallel hand (bush/bearing guide) Double acting Series Operational stroke length: HLA,, 25mm 13,, 23mm Descriptions HLA Size Cylinder bore size mm CS CS
More informationPNEUMATIC RACK & PINION ACTUATORS
PNEUMATIC RACK & PINION ACTUATORS 90-120 - 180 ALPHAIR PNEUMATIC ACTUATORS 90 - STD Series 120 - Y Series 180 - X Series ALPHAIR pneumatic actuators are made by the best manufacture experience on design,
More informationQuality Precision Reliability. Precisely what you need, Precisely when you need it
Quality Precision Reliability Precisely what you need, Precisely when you need it Regarding quality extremely pleased with Belden s products Belden offers the best product for the least cost. Regarding
More informationBore size (mm): 20, 25, 32, 40, 50, 63, 80, 100
JIS Standard ompact ydraulic ylinder ompact ydraulic ylinder Series KD/KG Series KD Series KG Nominal pressure: MPa ore size :,,,,,,, 0 Q K N M S 2 Nominal pressure: 1 MPa ore size :,,,,,,, 0 ourtesy of
More informationContents. AUrorA bearing company. Commercial/industrial units. Fax
Uror bering compny ontents Page No. Page No. engineering ata - product information...3- www.aurorabearing.com Fax 30-9-09 ommercial/industrial units ro ens Spm, Sp Male Molded Race Series... Sp, Spg Female
More informationShort Stroke Cylinders ISO Bores from 12 to 100 mm
Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic
More informationP5T J 032 D H S N R 100. Seals Nitrile (std) Fluorocarbon (high temp)
Catalog PDN1-3US Compact guie cyliner for short stroke applications 9 ore sizes, 1mm to mm Strokes 1 to 1mm epening on moel Stanar owel holes on boy an tool plate High loa bearing option Internal bumpers
More informationALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES
ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES The new series of ALPHAIR Pneumatic Actuators with special External Adjustment system meets every quality and precision requirement. The new
More informationDH Series High Pressure Springless Diaphragm Valves. Special Cleaning and Packaging 316L SS/ASTM A479. Machine finished
V-9 iaphragm Valves iaphragm Valves s Valves & Regulators H Series High Pressure Springless iaphragm Valves Features Metal-to-metal diaphragm seal Elgiloy diaphragm to provide high strength and corrosion
More informationRod Ends HM-M and HF-M
All original Text, Tables, and Genuine Aircraft Hardware Co. Rod Ends HM-M and HF-M Aircraft Series, Brass Inserts Aircraft quality carbon steel, magnetic particle inspected, cadmium plating or equivilant
More informationChoosing the Correct Roller Housed Unit Step by Step
Technical Article Choosing the Correct Roller Housed Unit Step by Step by Brian Berg, Karen Cunningham and Mark Flaherty, The Timken Company Table of Contents: Start With The Basics 2 Housing Type and
More informationSERIES 03/04 LIGHT MEDIUM DUTY PLATE
SERIES 03/0 LIGHT MEDIUM DUTY PLTE Capacities 300 lbs. PPLICTIONS: ll purpose series found in virtually all institutional as well as light industrial environments. The range of wheel materials available
More informationPARTS MANUAL LKO-100D ORANGE PEEL GRAPPLES V12153 X
PARTS MANUAL LKO-00D ORANGE PEEL GRAPPLES V5 X TABLE OF CONTENTS LKO-00D ORANGE PEEL GRAPPLE Information Identification Number ---------------------------------------- Nomenclature ---------------------------------------------------
More information799 Z VALVE WITH AP PNEUMATIC ACTUATOR
Pressure (bar) 799 Z VALVE WITH AP PNEUMATIC ACTUATOR FEATURES The 2-way ball-valve 799 Z is designed for the shut-off of HP hydraulic networks up to 1 or 20 bars, according to the diameters. POM floating
More informationEvaluating actuators for washdown in food & beverage applications:
Evaluating actuators for washdown in food & beverage applications: Materials, design, fabrication and maintenance affect actuator performance and compliance with food safety guidelines. By Aaron Dietrich
More informationTable of Contents. Journal Bearings 1. Journal Bearing Overview...Page Product Data...Pages 58-59
Table of Contents Radial Roller earings 1. Radial Roller earing Overview...Pages 4 - Configurations and Numbering System...Pages 6-9 3. Retainer Selection...Page 1 Series Code and Race and Roller Material...Page
More informationHLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting
G G B A S F J L2 L2 H2 LB2 N/ S/F Specifications Descriptions Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational
More informationCarbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
More informationSECTION COILING COUNTER DOORS
SECTION 08 33 13 COILING COUNTER DOORS SPEC WRITER NOTES: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use overhead coiling counter shutters as closures
More informationM/44000/M LINTRA rodless cylinders Double acting, magnetic piston
M/000/M LINTR rodless cylinders > > Ø 5... 0 mm > > Compact, spacesaving design > > Proven sealing system > > djustable cushioning > > Magentic piston as standard Technical features Medium: Compressed
More informationRA/28000;.../M, RA/28300;.../M Pneumatic cylinder, ISO Non-magnetic & magnetic piston, single acting Ø mm
/8000;.../M, /800;.../M Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, single acting... 00 mm High performance, stability and reliability Cylinders and mountings conform to ISO 555 (ISO 6,
More informationPar-Test. Fluid Analysis
Fluid Analysis 195 Fluid analysis has proven to be a critical tool for any preventive maintenance program. Fluid analysis is able to identify potential problems that cannot be detected by human senses.
More information771 XS VALVE WITH AP PNEUMATIC ACTUATOR
Pressure (bar) 771 XS VALVE WITH AP PNEUMATIC ACTUATOR FEATURES The 771XS+AP ball valve is designed for the automatic opening / closing of pipes with non-loaded industrial fluids, up to a pressure of 1
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 8: Forming Processes (Rolling, Extrusion, Forging, Drawing) DR. SOTIRIS L. OMIROU Forming Processes - Definition & Types - Forming processes are those in which
More informationNAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-96 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Ball Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical
More informationMiniature Product with a Threaded Coupling
8 ed oupling Miniature Product with a ed oupling Space saving with scoop proof connector designed for any harsh application where both size and EMI shielding are critical. compact solution iameter up to
More informationBULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
More informationStainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
More informationLow Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
More informationUnions, Swivels, Treating Irons & Circulating Heads HAMMER UNIONS
s, Swivels, Treating Irons & irculating Heads HER UNIONS General PRVEEN manufactures Haer s from raw materials in the form of forgings or castings in accordance with service requirements in sizes to "
More informationAURORA BEARING COMPANY... Manufacturer and worldwide supplier of the highest quality rod ends, spherical bearings, and journal bushings anywhere!
URR RIG MPY... Manufacturer and worldwide supplier of the highest quality rod ends, spherical bearings, and journal bushings anywhere! In 1971 a new company entered the rod end and spherical bearing marketplace.
More informationGas and Liquid Sampling
Gas and Liquid Sampling Training Goal Review basic terminology and standards Provide basic understanding and offerings of the low emissions (Low-E) manual samplers Understand the Low-E competitors Understand
More informationDisc Tumbler Line of Locks
Volume 5 a t a l o g L O K O M P N Y isc Tumbler Line of Locks 2 S V X ntroduction 1 am Locks 2 3 rawer/oor Locks 4 ang Locks 5 Snap olt Lock 6 s 7 8 9 10 11 Z olt Locks 12 Ratchet Locks 13 ore 14 Keys
More information[ An ISO 9001 : 2000 Certified Company ] AIRLESS SHOT BLASTING WHEEL
[ An IO 9001 : 2000 Certified Company ] BLAT CLEANING & FINIING YTEM AIRLE OT BLATING WEEL 'I' ECTION TURBINE "MEC OT" has developed a new wheel which gives an increased blast pattern and cleaning area.
More informationiglide A350 - Temperature and wear resistant
Compliant with both FD and EC Directive 10/2011 EC regulations Low moisture absorption Good with medium and high loads High temperature rating up to 356 F 447 - Temperature and wear resistant FD compliant,
More informationDP Series Low Pressure Pneumatic Diaphragm Valves 316L SS/ASTM A479. Machine finished. FC-01 Standard Cleaning and Packaging
iaphragm Valves iaphragm Valves V-0 P Series ow Pressure Pneumatic iaphragm Valves Features Minimum particle generation and dead space Fully contained seat to provide excellent resistance to swelling and
More informationSolutions in microspace
Solutions in microspace Standard and customized components High-precision Miniature linear ball bearings Miniature ball screws Miniature balls FROM STANDARD PRODUCTS TO CUSTOMIZED SOLUTIONS Our company
More informationHIGH RISE STORAGE SOLUTION
N - 2 LGT TRGE LUTN HGH RE TRGE LUTN Heavy Duty High Rise torage Rack Terminology : allet shelving systems are used for storing mainly palletized goods. allets and containers are arranged on top of or
More informationWith INA and FAG to More Energy Efficiency. for refrigerating compressors in household appliances
With INA and FAG to More Energy Efficiency for refrigerating compressors in household appliances Y o u r D e v e l o p m e n t P a r t n e r The Schaeffler Group is your partner... The Schaeffler Group
More informationAnderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
More informationiglide H Can be used underwater For high temperatures Resistant to chemicals High load capabilities
Can be used underwater For high temperatures Resistant to chemicals igh load capabilities 369 - Universal igh temperature and chemical resistance Underwater applications Suitable for temperatures up to
More informationPre s sure Re gulators
www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch
More informationInternal Freewheels ZZ
Internal s ZZ with ball bearing properties 84-1 Application as ackstop Features Internal s ZZ are sprag freewheels with an ball bearing properties. The freewheels are supplie grease-fille for normal operating
More informationPACKLESS VALVES. Instrument/Analyzer Products. Catalog 4515/USA April 2003
PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 table of contents NV55........................ 1-2 Nova
More informationVSM/55600/N2, Hollow piston rod cylinder Magnetic piston, double acting
VSM/55600/N, Hollow piston rod cylinder > > Ø 5 and 0 mmm > > Ideally suited for vacuum selected liquid transfer applications through the piston rod > > Non-rotating and telescopic piston rod provides
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
More informationSEGRIM A. (800) SEGRIMA
SEGRIM A 1 A Dedicated Team RIM-HANDLING COMPONENTS We have the solutions to reduce downtime and increase production. This dedicated team is focused totally on the specifi c needs of the rim manufacturing
More informationSpecification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
More informationPSDS Search Results. Internal Search Results INSTALLATION OF SAFETYING DEVICES
1 Help Contact Us Logoff Home Advanced Search PSDS Search Results Your Search query ((collectioncode BPS) AND (historical N) AND (release >= ) AND (release
More informationPressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
More informationVIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635.
Page 635.1 Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps Operating 1: Series 8124A Model H8124A Nominal Flow Temp. 2 Viscosity (GPM) 15-200 (M 3 /hr.) 3.4-45 (PSI) To 200 PSI (Bar) To 14 Bar (
More informationRAOUL WALLENBERG HIGH SCHOOL SECURITY COILING GRILLE SFUSD PROJECT NO SAN FRANCISCO UNIFIED SCHOOL DISTRICT SECTION 08330
SECTION 08330 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: Provide all labor, materials, necessary equipment, services and included but limited to all related work to complete security coiling grille
More informationPANEL BUSHINGS Brass Plated. SPLIT BUSHINGS Brass Plated Aluminum Anodized. CHASSIS FASTENERS Brass Aluminum
PNEL USHINGS rass Plated 3/32 D TLOG NUMER.127.253 11/32-32 THRED -32 THRED EH29-1 EH29-2 SPLIT USHINGS rass Plated luminum nodized.050 MTERIL LUMINUM FINISH PLTED NODIZED TLOG NUMER EH29-3 EH29-4 HIS
More informationFORGED FITTINGS, SOCKET-WELDING AND THREADED
SME 16.11-2011 FORE FITTINS, SOKET-WELIN N TREE 1 SOPE N ENERL 1.1 Scope This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding
More informationVALUE VALVES PRODUCT CHARACTERISTICS APPLICATIONS. VALUE VALVES VF-7 SERIES Centric Butterfly Valves. WAFER TYPE WAFER TYPE
VALUE VALVES VALUE VALVES VF SERIES entric utterfly Valves PRODUT HARATERISTIS oot Seat Design with artridge Seat Features and enefits Allowing Easy Disassembly and Seat hange Wafer ody, Full Lug ody,
More informationFluid Cooling Shell & Tube SSC Series
Fluid Cooling hell & ube C eries 0916 AINE EE CONUCION Performance Notes Preferred for new oil-water applications ype 316 stainless steel construction ow cost Custom designs available Competitively priced
More informationCeramic Linear Bearings
Ceramic Linear Bearings ov-ceramic-bearings-divider - Updated - 18-09-2017 163 Ceramic Linear Bearings Technical Information Ceramic linear bearings Self-lubricating These ceramic coated linear bearings
More informationPTFE SEALING SYSTEMS M-STEP TM M-GLIDE TM M-TURN TM M-CAP TM M-WIPE TM M-GUIDE TM M-FLEX TM
PTF LING YTM MTP TM MGLI TM MTUN TM MP TM MWIP TM MGUI TM MFLX TM Fig. 1 Fig. 2 2 PTF LING YTM M eals program of PTF seals consists of a variety of highperformance static and dynamic seals, designed for
More informationEngineering Data Pack HD Industrial Duty Pumps
Engineering Data Pack HD Industrial Duty Pumps Version. Excellence at work. Excellence in life. Table of Contents 0A Pump Mounting Dimensions 0A Pump Mounting Dimensions with Flanged Ports Flanged Port
More informationTECHNICAL HANDBOOK. ASME B73.1 Process Pump. Wilfley Sealing Technology. No Flush Water Required
TECHNICAL HANDBOOK ASME B3. Process Pump A Wilfley Sealing Technology No Flush Water Required WILFLEY SEALING TECHNOLOGY Wilfley invented the Dynamic Expeller Seal almost a century ago and has continued
More informationFilter/Regulators TABLE OF CONTENTS. Optional Components. Specifications. Dense Pack Element Design. Caution. Warning
ilter/regulators Optional Components s: drains are standard. Impulse drains ( ) or float drains ( ) available, depending on product family. : Units can be anodized any of eight colors. (Colors available:
More informationSho-Rate TM "50" Model 1350E and Sho-Rate TM "150" Model 1355E
Data Sheet Sho-Rate TM "50" Model 1350E and Sho-Rate TM "150" Model 1355E Ten-to-one rangeability Heavy-wall, precision bore, borosilicate glass metering tubes A wide range of scales on the metering tube
More informationSUGGESTED SPECIFICATIONS Pump Frames through 64132
TYPE HBB - HORIZONTAL SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames 44081 through 64132 GENERAL Furnish and install Horizontal Flexible Coupled Dry Pit Pumping Units complete with all accessories and appurtenances
More informationFeatures PNEUMATIC ACTUATORS. Stainless steel pneumatic actuators Spring return SR precision casting. Technical features.
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More information#287 FOOD GRADE FLUSHING AGENT
#287 FOOD GRADE FLUSHING AGENT Food Grade Flushing Agent is a non-toxic, non-drying, anti-wear flushing and cleaning lubricant that can be used to clean and flush all types of processing and packaging
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationHD Engineering Data Pack
Tuthill Pump Group 1500 South Pulaski Road Alsip, IL 6003 USA o 70.39.500 f 70.3.069 HD Engineering Data Pack Contents: Industrial Duty Pump Mounting Dimensions Page : Page 3: Page 4: Page 5: Pump Mounting
More informationLINEAR BALL SLIDES Ultra Precision Aluminum Black Anodized
LINER LL SLIDES Ultra Precision luminum lack nodized Linear all Slides are Designed for Light to Medium Loads. Slides Run with rade 5 Precision alls that Roll long Rod Rails. H Tap K J learance Holes E
More informationRange of utilization. Envelope
Kaplan Turbines Development Based on the principles of a Francis Turbine the Kaplan Turbine was developed by the Austrian engineer Victor Kaplan towards the beginning of the 20th century. Due to its adjustable
More informationSERVICE PARTS LIST. 7/8" (22mm) SDS ROTARY HAMMER. ABH-22 A002A See page 5 BULLETIN NO. A CATALOG NO.
00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 7/8" (22mm) SDS ROTARY HAMMER CATALOG
More information02V11/04. Thermostatic Control Valve. B Valve. Key benefits. Typical applications
02V11/04 Thermostatic ontrol Valve Valve Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationConcrete Processing. Pneumatic Products & Solutions for Ready Mix Batch Plants. Bulletin 0600-B80
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding oncrete Processing Pneumatic Products & Solutions for Ready Mix atch
More informationMetal Stock Identification
Metal Work Description Metal is produced in many different types, shapes, and forms. This activity plan provides examples of stock forms that might be found in a metal shop. Many of these shapes are common
More informationALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
More information-1- SPECIFICATIONS & STAINLESS STEEL SPREADER
-1-030300 & 030500 STAINLESS STEEL SPREADER STAINLESS STEEL RUBBER TROUGH SPREADER (030300) STAINLESS STEEL SPREADER (030500) INDEX I. STAINLESS STEEL SPREADER : A. Intent Statement B. Components 1. Dimensions
More informationSECTION FLAGPOLES. 1.1 SUMMARY A. Section Includes: 1. Fixed high dimensional, ground set, uniform conical taper, seamless tube flag pole.
SECTION 10 75 00 FLAGPOLES SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fixed high dimensional,
More information&217(17 217(17 &
3 4 www.bola.de 5 6 www.bola.de 7 Hotline +49 (0) 93 46-92 86-0 8 www.bola.de 9 Hotline +49 (0) 93 46-92 86-0 10 www.bola.de Stirring and Mixing 11 2 Magnetic stirring bars and stirrer shafts have to feature
More information