Shoulder Milling System 4910 Product Information Unique the 90 shoulder milling system of WNT 90 x 8 cutting edges + Dragonskin = More Power For machining of Steel Stainless steel Cast iron TOTAL TOOLING=QUALITY x SERVICE 2 达恩特商贸 ( 上海 ) 有限责任公司新徕路 468 号 C 栋东单元 2 楼 201800 嘉定区上海传真 021-60675933 免费咨询电话 4000521357 WNT Trading (Shanghai) Co., Ltd. Building C East Unit Second Floor, Xinlai Road 468 201800 Jiading District, Shanghai Fax 021-60675933 Tel. 4000521357 wnt-cn@wnt.com www.wnt.com
Double-sided 90 milling system 4910 Milling tools with indexable inserts For the first time this system allows an exact 90 profile with 8 usable cutting edges per insert. The search for a powerful, process-safe and high quality shoulder milling system is over. With the new double-sided 90 milling system 4910 WNT presents a unique system providing a precise 90 profile with 8 usable cutting edges per insert. Maximum efficiency guaranteed when shoulder milling. Hard wearing nickel plated body Narrow and wide pocket Easy handling with a large insert Exact 90 Profile Irregular pitch for quiet machining Field test reports Cutter Ø: 63 mm Material: 36CrNiMo4 v c : 150 m/min a e : 6 20 mm f z 0,13 0,27 + 100% a p 6 8 + 33% Chip volume, Q cm 3 /min 105 193 + 84% Number of finished 2 components 3 + 50% WNT Competitor
Dragonskin technology with 8 cutting edges for maximum economy Milling tools with indexable inserts With these extremely stable inserts the highest cutting data is possible, very smooth running even with less powerful machines and thin walled components. Very high efficiency with 8 usable cutting edges Exact 90 no programming adjustment necessary Maximum process reliability due to the extremely stable insert Maximum tool life due to the stable insert location positioning and Dragonskin coating New Dragonskin Coating Precision ground insert for perfect axial and radial run-out accuracy Dragonskin - the correct Dragon for every material type In combination with the Dragonskin coating system 4910 is not only extremely hard-wearing, but also provides a maximum performance and process reliability. the first choice for machining non, low and high alloyed steels The first choice for the machining of ductile and malleable irons and sintered steels The first choice for machining austenitic, ferritic and martensitic stainless steels Cutter Ø: 50 mm Material: 16MnCr5 a p : 3.5 mm a e : 35 mm Advantages/Benefits v c in m/min f z Chip volume, Q cm 3 /min Usable cutting edges 220 0,15 130 4 250 + 67% 0,25 245 + 100% 8 + 14% + 88% Very high metal removal rates Maximum service life 8 usable cutting edges per insert at exact 90 Highest cutting data Soft cutting action through positive chip breakers Low power consumption Universal application in various materials WNT Competitor
r Overview Milling tools with indexable inserts Cutter body Ø 40 160 mm Ø 32 mm Ø 32 mm Inserts One insert size SNHU 1204.. fits to all System 4910 tool-bodies. 规格型号 d d 1 l s IC D1 L S mm mm mm mm SNHU 1204.. 12.2 4.4 12.2 5 d l d 1 s SNHU 1204.. Inserts are available with Radii 0.8, 1.2, 1.6, 2.0 Detailed information about available diameters, tooldimensions and cuttingdata as well further information to thte insert like available radii or chipbreaker description can be found in our Main Catalogue Chapter 12. Also our WNT-Application engineers are always available to answer your question to the WNT shoulder milling system 4910. WNT 主样本
Milling tools with indexable inserts Grade designation Grade designation Grade designation Standard designation P M K N S H Steel Stainless steel Cast iron Non-ferrous metals Heat-resistant Hardened materials Steel DCX1230 Dry machining of steels High metal removal P30 M25 DPX1235 Specialist for wet machining Suitable for unstable conditions in steel machining P35 M30 Stainless steel DPX2240 Grade with the highest strength for machining Stainless Materials M40 P40 Cast iron DCX3215 Cast iron machining Suitable for higher cutting speeds K15 DPX3220 Tougher grade for high-strength cast iron materials Suitable for unstable work piece surfaces K20 Non-ferrous metals CWK4615 Polished surface Sharp and smooth geometry K15 Main Application Extended application Maximum economy 8 a p max 6 4 2 2 4 6 8 Cutting edges per insert The combination of all features of the WNT 4910 shoulder milling system is unique. The double sided inserts with 8 usable cutting edges and a a p max. of 8 mm guarantees an excellent economic efficiency. All the features results in an outstanding price performance ratio.
www.wnt.com 04/2017 99 069 00993 TOTAL TOOLING=QUALITY x SERVICE 2