PRECISION CUTTING TOOLS,INC

Similar documents
P C T COATING SOLUTIONS

Tool Coatings TECHNICAL. TiN (Titanium ium Nitride) TiCN (Titanium Carbonitride) - Balinit FUTURA (Titanium Aluminum Nitride) Balinit X.

4 Flute All Purpose. duramill.com. for steels, stainless steels and high-temp alloys. roughing, slotting, pocketing & ramping applications

PRIMARY GRADES TURNING TURNING / INSERTS / INTRODUCTION TO CARBIDE INSERTS

Countersink Section 2018 Master Catalog

HIGH PERFORMANCE SOLID CARBIDE CUTTING TOOLS

Solid Carbide Taps.

DHC. Differential Helix Cutter

2007 CATALOG. HIGH PERFORMANCE HSS-E PM Carbide Cut & Form Taps Thread Types UNC UNF M MF Standard Sizes 2-56 to 1 1 /2-6 M1.4 x 0.30 to M36 x 1.

HIGH PERFORMANCE PRODUCT

POW R PATH enduro STREAKERS POW R FEED OMEGA-6 INCONEX

Profile Milling Program Tools

INTRODUCTION. Think HSS

The Art and Science of Milling Titanium.

TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks

Made in Germany. SELECTION Milling 2017 valid until Economical Tools for Milling

Cutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba

High Performance Catalog

The most demanding Industries Applications Materials demand DATA FLUTE. Shouldn t you?

Endmills. Variable Index & Helix Endmills at General. Purpose Prices!

ALU-POWER HPC DREAM DRILLS TANK-POWER V7 PLUS A MINICUT TITANOX YU-AS19. Helping Aerospace Manufacturers Reach New Heights in Productivity

Tooling for Composites and Aerospace Materials. Diamond coated, carbide and PCD tools Routers, drills, and end mills Full special design capabilities

Application Products. High Performance Taps Thread Mills Carbide & PM End Mills

High Performance Varibale Index End Mills for Difficult to Machine Materials HY-PRO CARB VGX. Vol 7

TAKE IT ON WITH TITANOX

The ingenious solution for plunge milling

Z5 High Performance Roughers

Special Tool Configurations

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

AlTiN Coated. UN Thread Internal & External. Length. # of Flutes

Drilling Speeds and Feeds

Vol 2. Carbide Flat Drills Designed for Various Applications EXOCARB ADF ADF-2D

MFH Micro. Micro Dia. Cutter for High Feed Machining. Low Resistance and Durable Against Chatter for Highly Efficient Machining

POW R PATH enduro STREAKERS POW R FEED OMEGA-6 INCONEX trucore

Patented Unequal Helix Geometry

Carbide Modular Shrink System

Countersinks. Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute

TOOLMAKER SOLUTIONS Rotary Tool Blanks

Jongen UNI-MILL VHC milling cutter

SGS: Experts in Mold & Die.

Carbide Tip Coolant Fed Drills

Applications. Plunging - Z Axis Milling* 3D / Copy Milling* Facing. Slotting / Shoulder Milling. Spiral / Circular. Ramping

Six Flute High Performance End Mills

YE-VP16 HIGH PERFORMANCE CARBIDE END MILLS FOR STEEL, CAST IRON, STAINLESS STEEL. - 4 Flute Ball Nose - 6 Flute square & CorNer radius SERIES

M.A. Ford Where high performance is the standard. Phone: or

Solid Carbide Tools. Multi-Flute End Mills. High Performance Tooling. ISO 9001 Certified Company

CATALOGUE MILLS & DRILLS 2017 CARBIDE END MILLS 2 TEETH OR201, OR202 3 CARBIDE END MILLS 3 TEETH OR301 4 CARBIDE END MILLS 4 TEETH OR401, OR402 5

Kennametal Inc Technology Way Latrobe, PA USA. Tel: (United States and Canada)

Spiral Point SHEARTAP High Speed Steel Plug Style. Taps & Dies. *H7 Pitch Dia. Limit (Sizes 1³ ₄-5 and 2-4¹ ₂)

SG DRILL SERIES POWDERED METAL COBALT DRILLS

Metric and Fractional Sizes

ADVANCED STATE -OF-THE-ART CUTTING TOOL MANUFACTURING IN THE HEART OF WISCONSIN

NEW ANSI BORING BAR PROGRAM

SERIES 33 Three Flute End Mills

4 Flutes UTCOAT. Size φ1~φ20 CZS

END MILLS ROUGHING DRILLING RAMPING SLOTTING FINISHING. Now with corner radius!

Chip Thinning Operating Parameters

Unique the 90 shoulder milling system of WNT

-CC-SUS. Features & Benefits. Revolutionary Technology

RD-SAF Face milling and profiling cutter with positive round inserts

4JER 4JER. For Superalloy Machining. High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel.

Speed and Feed Recommendations

General Purpose Drill Section 2018 Master Catalog

Think cost efficiency, Think HSS SAWING

Nexus Cutting Tools. Accurate. Simplify. Nexus ShrinkMILL and Face Mills. Innovative. Solutions that are innovative, accurate, and simple.

Price/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291.

Cutting Speed Vc [M/min] Hardness

D101 - JOBBER DRILLS - Silver Bullet

UTTING TOOLS. Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM

Description Series Page. Turning. Grades for holemaking 256 IN1030, IN2505, IN6505. Replaceable tip drill shanks 258

4JER 4JER. For superalloy machining. High efficiency and stable machining for heat resistant alloys such as Inconel.

2016 New Revision HIGH PERFORMANCE TAPS

recommended for cutting hard and tough steels under extreme cutting conditions. are regularly supplied with a rake angle of 0 to

HSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:

All TyCarb HF tools can easily be converted from High Feed to 90 Degree Square Shoulder Simply switch insert styles from

Threading Tools. Cutting, milling and forming custom-made. Chip by Chip to the Top

NPA. New Small Diameter Fast Feed Tools Carrying Inserts with Four Cutting Edges. New Product Announcement INCH MARCH 2018.

The new force in machining.

FOR IMMEDIATE RELEASE

/ 2019 full product line

Your Cutting Tool Solution for DRILLS

Solid End Milling. Solid End Milling Introduction... K2 K17. High-Performance Solid Carbide End Mills... L1 L150

Carbide Modular Shrink System

TOOLING NEWS E-116. New SumiDrill Power Series Expansion. SDP Type. All-rounder for Drilling

Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts

Cutting Tools for Steels. Featuring coolant-fed premium cobalt taps

The Ultimate Drill Family For High Heat Applications

SQUARE 6 SQUARE SHOULDER MILLING GETS EVEN SMALLER

5 flute Trochoidal end mills with variable helix

CUTTING TOOLS 8000 DISTRIBUTED BY SPARK PLUGS (USA), INC. NTK

Conical Barrel Tool for 5-axis machining operations

Milling tools made by JONGEN! C10 FP 124. Face Milling

Coating and Reconditioning Services

Introduction. Inserts. Tools. Technical information. Contents D18 D20 D30

Recondition to original quality. Re-grinding and Re-coating Service GUHRING YOUR WORLD-WIDE PARTNER

Small but Powerful Positive Insert with Dovetail Design

Rotary Cutting Tools 2009 Metric

M42 - Bimetal Band Saw Blade with Cobalt

Engineering Materials

Core drills PRECISION TOOLS

Transcription:

CARBIDE DRILLS CARBIDE ENDMILLS COBALT ENDMILLS PRECISION CUTTING TOOLS,INC POWDER METAL ENDMILLS

MACHINING Titanium MACHINING stainless StEEls For many years, Titanium has been the most commonly used material in the aerospace industry. Aircraft engineers prefer using Titanium, because of its low mass and high-strength properties. However, Titanium is very difficult to machine and the proper cutting tools must be utilized. Stainless Steels are frequently used in the aerospace and automotive industries, because they are tough, durable and corrosion resistant. However, Stainless Steels are work-hardening, making them difficult to machine. What you need to know about Titanium s Machinability. Its low-thermal conductivity makes the tool tip reach high temperatures, causing tool wear. What you need to know about StainlEs StEEls Machinability. Their work-hardening property requires a high-cutting force, decreasing the cutting tool s life. Its high-chemical reactivity leads to sticking and clogging of the chip removed. This causes erosion on the rake face and cutting edge failure. Its low modulus of elasticity leads to chatter and a poor surface finish. Their high-strength property leads to difficult chip-breaking. Their low-thermal conductivity makes the tool tip reach high temperatures, causing tool wear. Their high-chemical reactivity leads to sticking and clogging during chip evacuation. This causes erosion on the rake face and cutting edge failure. What You Need when Machining Titanium and Stainless Steels High Wear Resistance Reduced Tool Tip Temperatures High Chip Removal Rates Minimized Vibration Sharp Cutting Edges Increased Productivity

COATINGS FOR Titanium AND stainless StEEls () Aluminum-Titanium-Nitride is ideal for high performance machining of hardened materials. Its chemical composition makes it high in hardness, a property necessary for cutting difficult-to-machine materials. Furthermore, Plus coating is corrosion resistant at increased temperatures of up to 70º F; temperatures significantly higher than that of TiN. Applications Steels (Carbon, Mild, Stainless, HSS) // Inconel // Titanium and other Ferrous materials For micro cutting tools, a thickness of < μm is recommended. Color Microhardness (HV 0.0) Friction coeff. against steel (dry) Max. temperature of operation Coating thickness Structure Anthracite, Dark Grey 00 0.7 00 C 70 F - [μm] Multilayer Silver Silver (AlTiCrN) Aluminum-Titanium-Chromium-Nitride Silver is a PVD coating specifically intended for use on carbide cutting tools and the machining of abrasive and gummy materials. Its chemical composition consists of a smooth CrN surface which reduces the cold welding tendency, ideal properties for cutting hard materials. Applications Titanium // Inconel // Stainless Steels // Cast Iron and their alloys For micro cutting tools, a thickness of < μm is recommended. Color Microhardness (HV 0.0) Friction coeff. against steel (dry) Max. temperature of operation Coating thickness Structure Silver 00 0. 00 C 70 F - [μm] Multilayer Varianta Supral Varianta Supral (TiAlCN) (ML) Titanium-Aluminum-Carbo-Nitride Varianta Supral coating is ideal for dry high-speed machining. Its chemical composition TiAlCN(ML), provides both high heat and oxidation resistance. Furthermore, Varianta Supral has a low coefficient of friction, reducing tool wear and resulting in a longer tool life. Applications Steels (Carbon, Mild, Stainless, HSS) // Inconel // Titanium // Cast Materials // Hardened Tool Steels For micro cutting tools, a thickness of < μm is recommended. Color Microhardness (HV 0.0) Friction coeff. against steel (dry) Max. temperature of operation Coating thickness Structure Black 00 0. 00 C 70 F - [μm] Multilayer

MATERIAL CODE TABLE OF CONTENTS P Low-Carbon Steels- 000 Series (> HRc) Low-Carbon Steels- 000 Series (< HRc) Alloy Tool Steels- 00,000, 000 ( HRc) Alloy Tool Steels- 00,000, 000 (- HRc) Ferritic, Martensitic & PH Stainless Steels- 00 s,ph Types(-, -, 7-) ( HRc) VARIABLE ENDMILLS SERIES Fractional SERIES Fractional SERIES 7 Fractional Speeds and Feeds for High Performance Milling ( Series, Series and 7 Series) Page 7 Ferritic, Martensitic & PH Stainless Steels- 00 s,ph Types(-, -, 7-)(- HRc) COBALT (M) ENDMILLS Page M K Austenitic Stainless Steels- Inox, 00 Series, 00 Series and 0L Austenitic Stainless Steels & Cast Stainless Steels- 0,, (<HRc) Duplex Steels (Austenitic & Ferritic)-, 9, F, 0 Gray Cast Iron Ductile Iron- 0-0-, -- (<HRc) Ductile Iron- 0, 0 (<HRc) Wrought Aluminum Alloys,, Flute CurveCut Ground,, Flute CurveCut Milled POWDER METAL (PM0) ENDMILLS Flute Finisher Flute Finisher,, Flute Finisher / Extended Neck 9 Page 0 Low-Silicon Aluminum Alloys - Si <.% - 0, 707,,, Flute Rougher - Fine Pitch N High-Silicon Aluminum Alloys - Si >.% -0, 707 Metal Matrix Composite - (Glass Filament Epoxy,Fiber Glass, Graphite),, Flute Rougher - Fine Pitch / Extended Neck Copper & Copper Alloys INTERNAL COOLANT CARBIDE DRILLS Page Carbon & Graphite Composites General Purpose S Iron-Based, Heat-Resistant Alloys- Incoloy 00-0, A-, N- Nickel Based, Cobalt Based, Heat-Resistant Alloys- Haynes,Haynes, Hastelloy, Waspaloy, Inconel /7 ( HRc) Titanium Alloys- Commercially Pure, Al-V, Astm //, Ti-Al-SN-Zr-Mo ( HRc) PILOT DRILL Specials Prints General Purpose (All deep hole drills must utilize a pilot hole drill) Page Page Hardened Tool Steels- H Series(0,,), D Series (,), 0, P0 ( HRc) Carbide, Powder Metal, Cobalt & HSS 7 H Hardened Tool Steels- H Series(0,,), D Series (,), 0, P0 (- HRc) Hardened Tool Steels- H Series(0,,), D Series (,), 0, P0 (-0 HRc) Hardened Tool Steels- H Series(0,,), D Series (,), 0, P0 (0- HRc) H Series(0,,), D Series (,), 0, P0 (- HRc)

Variable Flute EndMill Flute Variable EndMill Tool comes with ⁰ chamfer Plus () recommended (up to % faster than uncoated) Radii (available upon request) Left Hand (available upon request) Flats added within hrs. P M K S H Fractional D Extended Neck D D D = Helix L L L L REACH L Available Radius Available Radius Ball End Coated Sharp Corner / / / -/.00 0T0000 0T0000B 0T0000S / /.00 0T00 0T00B 0T00S / / /.0.00.00.0 0T007 0T007B 0T007S / / / -/.0.00.00.0 0T0070 0T0070B 0T0070S / /.0.00.00.0 0T0000 0T0000B 0T0000S / /.0.00.00.0 0T00 0T00B 0T00S / / -/.0.00.00.0 0T070 0T070B 0T070S / / /.0.00.00.0 0T0000 0T0000B 0T0000S / / 7/ -/.0.00.00.0 0T007 0T007B 0T007S / /.0.00.00.0 0T0000 0T0000B 0T0000S / /.0.00.00.0 0T00 0T00B 0T00S / / -.0.00.00.0 0T0 0T0B 0T0S / / /.0.00.00.0 0T0000 0T0000B 0T0000S / / -/.0.00.00.0 0T0000 0T0000B 0T0000S / /.0.00.00.0 0T0000 0T0000B 0T0000S / / -/.0.00.00.0 0T000 0T000B 0T000S / / -/.0.00.00.0 0T000 0T000B 0T000S 7/ 7/ -/.0.00.00.0 0T0707 0T0707B 0T0707S 7/ 7/ -/.0.00.00.0 0T070007 0T070007B 0T070007S 7/ 7/ -/.0.00.00.0 0T0700 0T0700B 0T0700S 7/ 7/.0.00.00.0 0T07000 0T07000B 0T07000S / / -/.0.00.00.0.00 0T00 0T00B 0T00S / /.0.00.00.0.00 0T0000 0T0000B 0T0000S / /.0.00.00.0.00 0T00 0T00B 0T00S / / -/.0.00.00.0.00 0T000 0T000B 0T000S / /.0.00.00.0.00 0T0000 0T0000B 0T0000S / / -/.0.00.00.0.00 0T000 0T000B 0T000S / /.0.00.00.0.00 0T0000 0T0000B 0T0000S /.0.00.00.0.00.090 0T0070 0T0070B 0T0070S -/.0.00.00.0.00.090 0T00 0T00B 0T00S -/.0.00.00.0.00.090 0T070 0T070B 0T070S -/.0.00.00.0.00.090 0T00 0T00B 0T00S.0.00.00.0.00.090 0T0000 0T0000B 0T0000S / / 7/.0.00.00.0.00.090. 0T07 0T07B 0T07S / / -/.0.00.00.0.00.090. 0T00 0T00B 0T00S / / -.0.00.00.0.00.090. 0T 0TB 0TS / / -/.0.00.00.0.00.090. 0T0 0T0B 0T0S / /.0.00.00.0.00.090. 0T000 0T000B 0T000S / / 7.0.00.00.0.00.090. 0T0007 0T0007B 0T0007S -/.0.00.00.0.00.090. 0T00 0T00B 0T00S -/.0.00.00.0.00.090. 0T000 0T000B 0T00S -/.0.00.00.0.00.090. 0T0 0T0B 0T0S.0.00.00.0.00.090. 0T000 0T000B 0T000S 7.0.00.00.0.00.090. 0T0007 0T0007B 0T0007S Other Dimensions & Radii are Available Upon Request Extended Neck Ball End Coated / / / -/.0.00.00.0 0T007. 0T007.B / / / -/.0.00.00.0 0T007. 0T007.B / / / -/.0.00.00.0 0T0000. 0T0000.B / / / -/.0.00.00.0 0T0000. 0T0000.B / / -/.0.00.00.0.00 0T00. 0T00.B / / -/.0.00.00.0.00 0T00. 0T00.B / / -/.0.00.00.0.00 0T00. 0T00.B / -/.0.00.00.0.00.090 0T0070. 0T0070.B / -/.0.00.00.0.00.090 0T0070. 0T0070.B / -/.0.00.00.0.00.090 0T0070. 0T0070.B / /.0.00.00.0.00.090. 0T000. 0T000.B / /.0.00.00.0.00.090. 0T000. 0T000.B / / 7.0.00.00.0.00.090. 0T0007. 0T0007.B -.0.00.00.0.00.090. 0T0. 0T0.B -/.0.00.00.0.00.090. 0T0. 0T0.B -/ 7.0.00.00.0.00.090. 0T07. 0T07.B Speeds & Feeds Refer to Page. is ideal for high performance machining of hard materials. Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers Internal Coolant xd - 0xD Solid Carbide EndMills Cobalt (M) EndMills () 9-79

Variable Flute EndMill / Helix / Eccentric OD Solid Carbide EndMills Cobalt (M) EndMills Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal (PM) Finishers Powder Metal (PM) Roughers Internal Coolant xd - 0xD Flute Variable EndMill, Eccentric OD Silver (AlTiCrN) recommended (up to % faster than uncoated) Radii (available upon request) Left Hand (available upon request) Flats added within hrs. Eccentric OD P M K S H Fractional D D L L Extended Neck D Speeds & Feeds Refer to Page. Available Radius D L AlTiCrN Silver Coated L L D Benefits High toughness Low coefficient of friction Excellent wear resistance Advanced oxidation resistance L AlTiCrN Ball End Coated / / /.0.00.00.0 0T0000 0T0000B / / / -/.0.00.00.0 0T0070 0T0070B / /.0.00.00.0 0T0000 0T0000B / /.0.00.00.0 0T00 0T00B / / /.0.00.00.0 0T0000 0T0000B / / 7/ -/.0.00.00.0 0T007 0T007B / /.0.00.00.0 0T0000 0T0000B / /.0.00.00.0 0T00 0T00B / / /.0.00.00.0 0T0000 0T0000B / / -/.0.00.00.0 0T0000 0T0000B / /.0.00.00.0 0T0000 0T0000B / / -/.0.00.00.0 0T000 0T000B 7/ 7/ -/.0.00.00.0 0T070007 0T070007B 7/ 7/.0.00.00.0 0T07000 0T07000B / / -/.0.00.00.0.00 0T00 0T00B / /.0.00.00.0.00 0T00 0T00B / /.0.00.00.0.00 0T0000 0T0000B / / -/.0.00.00.0.00 0T000 0T000B / / -/.0.00.00.0.00 0T0 0T0B /.0.00.00.0.00.090 0T0070 0T0070B - -/.0.00.00.0.00.090 0T0 0T0B -/.0.00.00.0.00.090 0T000 0T000B.0.00.00.0.00.090 0T0000 0T0000B / /.0.00.00.0.00.090. 0T000 0T000B / / -.0.00.00.0.00.090. 0T 0TB / / -/.0.00.00.0.00.090. 0T0 0T0B / / -/.0.00.00.0.00.090. 0T0 0T0B / / 7.0.00.00.0.00.090. 0T000 0T000B.0.00.00.0.00.090. 0T0 0T0B -/.0.00.00.0.00.090. 0T000 0T000B -.0.00.00.0.00.090. 0T 0TB -/.0.00.00.0.00.090. 0T0 0T0B / 7.0.00.00.0.00.090. 0T7 0T7B -/.0.00.00.0.00.090. 0T0000 0T0000B.0.00.00.0.00.090. 0T0000 0T0000B Other Dimensions & Radii are Available Upon Request D D L L REACH L Available Radius Silver Silver is ideal for machining abrasive and gummy materials. AlTiCrN Silver Coated L D AlTiCrN Ball End Coated / / / -/.0.00.00.0 0T007. 0T007.B / / / -/.0.00.00.0 0T007. 0T007.B / / / -/.0.00.00.0 0T0000. 0T0000.B / / / -/.0.00.00.0 0T0000. 0T0000.B / / -/.0.00.00.0.00 0T00. 0T00.B / / -/.0.00.00.0.00 0T00. 0T00.B / / -/.0.00.00.0.00 0T00. 0T00.B / -.0.00.00.0.00.090 0T0070. 0T0070.B / -/.0.00.00.0.00.090 0T0070. 0T0070.B / -/.0.00.00.0.00.090 0T0070. 0T0070.B / /.0.00.00.0.00.090. 0T000. 0T000.B / /.0.00.00.0.00.090. 0T000. 0T000.B / /.0.00.00.0.00.090. 0T000. 0T000.B.0.00.00.0.00.090. 0T0. 0T0.B -/.0.00.00.0.00.090. 0T0. 0T0.B -/ 7.0.00.00.0.00.090. 0T07. 0T07.B () 9-79

Variable Flute EndMill / Eccentric OD Flute Variable EndMill Plus () recommended (up to % faster than uncoated) Radii (available upon request) Left Hand (available upon request) Flats added within hrs. Eccentric OD P M K S H Fractional D D L L / / / / / / / / / / Extended Neck D / / / / / / / / / / / / / / / / / / / / / / / / D / / / / / / / / / / / / / / / / / / / - -/ -/ L / / / / / / / / / / -/ -/ -/ -/ -/ L REACH -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ - -/ -/ -/ - -/ -/ -/ - -/ -/ FLUTES Other Dimensions & Radii are Available Upon Request L 7 FLUTES Available Radius.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.00.0.00.00.0.00.0.00.00.0.00.090.0.00.00.0.00.090.0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090. NOTE: When ordering with radius, include the series and part number. Example: (.0(radius) + 07(series) + T 0 000 (part) =.0-07T 0 000 ) D D Available Radius Speeds & Feeds Refer to Page..0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.0.00.00.0.00.0.00.00.0.00.0.00.00.0.00.0.00.00.0.00.0.00.00.0.00.090.0.00.00.0.00.090.0.00.00.0.00.090.0.00.00.0.00.090.0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090..0.00.00.0.00.090. L 07T0000 07T0070 07T0000 07T0070 07T00 07T0000 07T00 07T0000 07T0070 07T0 07T000 07T00 07T0 07T00 L L Ball End Coated 07T0000B 07T0070B 07T0000B 07T0070B 07T00B 07T0000B 07T00B 07T0000B 07T0070B 07T0B 07T000B 07T00B 07T0B 07T00B L D is ideal for high performance machining of hard materials. 07T007. 07T007. 07T0000. 07T0000. 07T0000. 07T0000. 07T00. 07T00. 07T00. 07T00. 07T0070. 07T0070. 07T0070. 07T0070. 07T000. 07T000. 07T000. 07T000. 07T0. 07T0. 07T0. 07T07. L Ball End Coated 07T007.B 07T007.B 07T0000.B 07T0000.B 07T0000.B 07T0000.B 07T00.B 07T00.B 07T00.B 07T00.B 07T0070.B 07T0070.B 07T0070.B 07T0070.B 07T000.B 07T000.B 07T000.B 07T000.B 07T0.B 07T0.B 07T0.B 07T07.B D Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers Internal Coolant xd - 0xD Solid Carbide EndMills Cobalt (M) EndMills () 9-79 7

M -G (GROUND) Solid Carbide EndMills Cobalt (M) EndMills Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers (M) EndMills Multi Flute CurveCut Ground - High Temp. Alloys Available in Plus Coating - T Cobalt is high in hardness; excellent for slow to moderate machining of hard materials. Ideal for Titanium & Stainless Steel Alloys Right Hand Spiral & Cut Weldon Flats Square & Ballnose End P M K S RIGHT HAND D D L L / / / / -/ -/ -/ -/ -/ -/ -/ / / / / - -/ -7/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 7-/ 7-/ 9-/ 9-/ -/ FLUTES M,, Speeds & Feeds Refer to Page. CC0 CCS CC CC CC0 CC0X CC CCX CC CCX CC CC00 CC00X CC0 CC0X CC0 CC0X CC0X CC0 CC0X CC CCX CC CCX CCX CC00A CC00A CC00A CC00A CC00A CC00A CC00A CC00A T-CC0 T-CCS T-CC T-CC T-CC0 T-CC0X T-CC T-CCX T-CC T-CCX T-CC T-CC00 T-CC00X T-CC0 T-CC0X T-CC0 T-CC0X T-CC0X T-CC0 T-CC0X T-CC T-CCX T-CC T-CCX T-CCX T-CC00A T-CC00A T-CC00A T-CC00A T-CC00A T-CC00A T-CC00A T-CC00A is ideal for high performance machining of hard materials. Internal Coolant xd - 0xD Starting Recommended Speeds & Feeds Cutting Speed Feed Rate (CLPT) Profiling Slotting Material / -/ Maximum Depths of cut CC- Ground CC- Ground CC- Ground CC- Ground CC- Ground CC- Ground Radial Axial Axial Titanium Alloy <HRC 70 SFM 0.00 0.000 0.00 0.00 0.000 0.xD.xD xd Titanium Alloy >HRC 0 SFM 0.00 0.00 0.009 0.00 0.000 Stainless Steel >HRC 0 SFM 0.00 0.00 0.00 0.00 0.0070 The values are for cobalt tools. For Powder Metal you can increase Feed Rates by 0% Left Hand Available Upon Request 0.xD xd xd Stainless Steel -HRC 00 SFM 0.00 0.00 0.000 0.00 0.00 () 9-79

-M (MILLED) M Multi Flute CurveCut Milled - High Temp. Alloys Available in Plus Coating - T Ideal for Titanium & Stainless Steel Alloys Cobalt is high in hardness; excellent for slow to moderate machining of hard materials Right Hand Spiral & Cut Weldon Flats Square & Ballnose End P M K S RIGHT HAND D D L L / / / / -/ -/ -/ -/ -/ -/ -/ / / / / - -/ -7/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 7-/ 7-/ 9-/ 9-/ -/ FLUTES M,, Speeds & Feeds Refer to Page 9. CCM-0 CCM-S CCM- CCM- CCM-0 CCM-0X CCM- CCM-X CCM- CCM-X CCM- CCM-00 CCM-00X CCM-0 CCM-0X CCM-0 CCM-0X CCM-0X CCM-0 CCM-0X CCM- CCM-X CCM- CCM-X CCM-X CCM-00A CCM-00A CCM-00A CCM-00A CCM-00A CCM-00A CCM-00A CCM-00A T-CCM0 T-CCMS T-CCM T-CCM T-CCM0 T-CCM0X T-CCM T-CCMX T-CCM T-CCMX T-CCM T-CCM00 T-CCM00X T-CCM0 T-CCM0X T-CCM0 T-CCM0X T-CCM0X T-CCM0 T-CCM0X T-CCM T-CCMX T-CCM T-CCMX T-CCMX T-CCM00A T-CCM00A T-CCM00A T-CCM00A T-CCM00A T-CCM00A T-CCM00A T-CCM00A (M) EndMills is ideal for high performance machining of hard materials. Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers Solid Carbide EndMills Cobalt (M) Endmills Starting Recommended Speeds & Feeds Cutting Speed Feed Rate (CLPT) Profiling Slotting Material / -/ Maximum Depths of cut CC- Milled CC- Milled CC- Milled CC- Milled CC- Milled CC- Milled Radial Axial Axial Titanium Alloy <HRC 0 SFM 0.00 0.000 0.00 0.00 0.000 0.xD.xD xd Titanium Alloy >HRC 0 SFM 0.00 0.000 0.00 0.00 0.009 Left Hand Available Upon Request Stainless Steel >HRC 90 SFM 0.00 0.00 0.007 0.00 0.00 The values are for cobalt tools. For Powder Metal you can increase Feed Rates by 0% 0.xD xd xd Stainless Steel -HRC 0 SFM 0.00 0.007 0.00 0.00 0.009 Internal Coolant xd - 0xD () 9-79 9

PM0 Powder Metal (PM0) EndMills flute / Helix / For High Temp. Alloys Solid Carbide EndMills Cobalt (M) EndMills Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers Flute Finisher EndMill - Center Cut Available in Plus Coating - T Powder Metal provides higher cutting edge stability at increased operating speeds Ideal for Titanium & Stainless Steel Alloys Right Hand Spiral & Cut Weldon Flats Square & Ballnose End P M K S H RIGHT HAND - Flute D D L L / / / / / / / / / / -/ -/ -/ -/ / / / / / / / / / / - -/ - -/ -/ -/ - -/ -/ -7/ -/ -/ -/ -/ 7-/ -/ -/ -/ 7-/ -/ -/ -/ 7-/ -/ -/ -/ -/ -/ D PM-00 PM-0 PM-0 PM-0 PM-00 PM-0 PM-0 PM-0 PM-0 PM- PM-S PM- PM- PM-S PM-0 PM- PM- PM-S PM-00 PM-0 PM-0 PM-0S PM-0 PM-0 PM- PM- PM- L PM0 T-PM-00 T-PM-0 T-PM-0 T-PM-0 T-PM-00 T-PM-0 T-PM-0 T-PM-0 T-PM-0 T-PM- T-PM-S T-PM- T-PM- T-PM-S T-PM-0 T-PM- T-PM- T-PM-S T-PM-00 T-PM-0 T-PM-0 T-PM-0S T-PM-0 T-PM-0 T-PM- T-PM- T-PM- L Ball End PM-0 PM-0 PM-0 PM-70 PM-0 PM-0 PM-0 PM-70 PM- PM- PM-S PM- PM-7 PM-7S PM- PM- PM- PM-S PM-0 PM-0 PM-0 PM-0S PM-70 PM- PM- PM- PM-7 D is ideal for high performance machining of hard materials. Internal Coolant xd - 0xD 0 () 9-79

Powder Metal (PM0) EndMills flute / Helix / For High Temp. Alloys PM0 Flute Finisher EndMill - Center Cut Available in Plus Coating - T Powder Metal provides higher cutting edge stability at increased operating speeds. Ideal for Titanium & Stainless Steel Alloys Right Hand Spiral & Cut Weldon Flats Square & Ballnose End P M K S H RIGHT HAND D D L L / / / / / / / -/ -/ -/ -/ / / / / / / / - 0 -/ -7/ -/ -/ -/ -/ -/ -/ 7-/ -/ -/ -/ -/ 7-/ -/ -/ -/ -/ -/ -/ -/ -/ 7-/ 9-/ -/ -/ -/ D PM-00X PM-0X PM-0X PM-0X PM-X PM-X PM-X PM-0X PM-X PM-X PM-SX PM-X PM-00X PM-0X PM-0X PM-0SX PM-0X PM-0X PM-X PM-X PM-X PM-0X PM-X PM-X PM-00A PM-00A PM-00A PM-00A PM-0A L PM0 T-PM-00X T-PM-0X T-PM-0X T-PM-0X T-PM-X T-PM-X T-PM-X T-PM-0X T-PM-X T-PM-X T-PM-SX T-PM-X T-PM-00X T-PM-0X T-PM-0X T-PM-0SX T-PM-0X T-PM-0X T-PM-X T-PM-X T-PM-X T-PM-0X T-PM-X T-PM-X T-PM-00A T-PM-00A T-PM-00A T-PM-00A T-PM-0A L D Ball End PM-0X PM-0X PM-0X PM-X PM-X PM-X PM-7X PM-X PM-X PM-X PM-SX PM-7X PM-0X PM-0X PM-0X PM-0SX PM-70X PM-X PM-X PM-X PM-7X PM-X PM-X PM-X T-PM-0A T-PM-0A T-PM-0A T-PM-0A T-PM-A is ideal for high performance machining of hard materials. Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM) Roughers Solid Carbide EndMills Cobalt (M) EndMills Internal Coolant xd - 0xD () 9-79

PM0,, flute / Helix / Extended Neck / For High Temp. Alloys Solid Carbide EndMills Cobalt (M) EndMills Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers,, Flute Extended Neck EndMill - Center Cut Available in Plus Coating - T Powder Metal provides higher cutting edge stability at increased operating speeds. Ideal for Titanium & Stainless Steel Alloys Right Hand Spiral & Cut Weldon Flats (upon request) Square & Ballnose End P M K S H RIGHT HAND - Extended Neck - Flute D / / / / D D D D D L RIGHT HAND - Extended Neck - Flute L RIGHT HAND - Extended Neck - Flute / / / / -/ -/ -/ -/ -/ -/ -/ -/ L -/ L REACH 0 L REACH 0 L REACH D L 7-/ -/ 7-/ -/ -/ -/ 0-/ -/ L -/ -/ 0-/ -/ 7-/ 9-/ -/ L 7-/ 9-/ -/ PM0,, PM-A0S.Y PM-A0S.Y PM-AS.Y PM-AS.Y PM-AS.Y PM-AS.Y PM-AS.Y PM-AS.Y PM-AS.0Y PM-A0S.0X PM-A0S.0X PM-A0S.0X PM-A0S.0X PM-AS. PM-AS. PM-AS. PM-AS. PM-AS. PM-AS. L L T-PM-A0S.Y T-PM-A0S.Y T-PM-AS.Y T-PM-AS.Y T-PM-AS.Y T-PM-AS.Y T-PM-AS.Y T-PM-AS.Y T-PM-AS.0Y T-PM-A0S.0X T-PM-A0S.0X T-PM-A0S.0X T-PM-A0S.0X T-PM-AS. T-PM-AS. T-PM-AS. T-PM-AS. T-PM-AS. T-PM-AS. L D is ideal for high performance machining of hard materials. Ball End PM-B0S.Y PM-B0S.Y PM-BS.Y PM-BS.Y PM-BS.Y PM-BS.Y PM-BS.Y PM-BS.Y PM-BS.0Y Ball End PM-B0S.0X PM-B0S.0X PM-B0S.0X PM-B0S.0X PM-BS. PM-BS. PM-BS. Ball End PM-BS. PM-BS. PM-BS. Internal Coolant xd - 0xD () 9-79

,,, flute / 0 Helix / Fine Pitch Rougher PM0 Multi Flute Fine Pitch Rougher - Center Cut Available in Plus Coating - T Powder Metal provides higher cutting edge stability at increased operating speeds. Ideal for Titanium & Stainless Steel Alloys Right Hand Spiral & Cut Weldon Flats Square & Ballnose End P M K S H RIGHT HAND - Flute D D L L / / / / / / / / / / / / / / / / / / RIGHT HAND - Flute / - -/ / - -/ -9/ -/ -/ - -7/ -/ -/ -/ D D L L RIGHT HAND - Flute D D L L -/ -/ -/ -/ RIGHT HAND - Flute -/ -/ -/ 7-/ -/ -/ -/ -/ -/ D D L L 0-7/ -/ -/ -/ 7-/ -/ -/ 7-/ 9-/ -/ -/ -/ D PM-FS00 PM-F00 PM-F0 PM-F0 PM-F00 PM-F0 PM-FS0 PM-F0 PM-FS PM-F PM-F PM-FS0Y PM-F0Y PM-FY PM-FY PM-FSY PM-FY PM-F00X PM-F0X PM-F0X PM-F0SX PM-F0X PM-F0X PM-FX PM-FX PM-FX PM-F0Z PM-F00A PM-F00A PM-F00A PM-F00A PM-F0A PM0,,, 0 L L Ball End T-PM-FS00 T-PM-F00 T-PM-F0 T-PM-F0 T-PM-F00 T-PM-F0 T-PM-FS0 T-PM-F0 T-PM-FS T-PM-F T-PM-F T-PM-FS0Y T-PM-F0Y T-PM-FY T-PM-FY T-PM-FSY T-PM-FY PM-FS0 PM-F0 PM-F0 PM-F0 PM-F0 PM-F0 PM-FS PM-F PM-FS PM-F PM-F7 Ball End T-PM-F00X T-PM-F0X T-PM-F0X T-PM-F0SX T-PM-F0X T-PM-F0X T-PM-FX T-PM-FX T-PM-FX PM-F0X PM-F0X PM-F0X PM-F0SX PM-F70X PM-FX PM-FX PM-FX PM-F7X Ball End T-PM-F0Z T-PM-F00A T-PM-F00A T-PM-F00A T-PM-F00A T-PM-F0A Rougher is ideal for high performance machining of hard materials. Ball End PM-FSY PM-FY PM-FY PM-FY PM-FSY PM-F7Y PM-FZ PM-F0A PM-F0A PM-F0A PM-F0A PM-FA D Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM) Roughers Internal Coolant xd - 0xD Solid Carbide EndMills Cobalt (M) EndMills () 9-79

PM0 (PM0) EndMills,, flute / 0 Helix / Extended Neck Fine Pitch Rougher Solid Carbide EndMills Cobalt (M) EndMills Variable Helix EndMills (M) Rough & Finish EndMills Powder Metal Powder Metal (PM0) Finishers (PM0) Roughers Multi Flute EndMill Extended Neck Fine Pitch Available in Plus Coating - T Powder Metal provides higher cutting edge stability at increased operating speeds. Ideal for Titanium & Stainless Steel Alloys Right Hand Spiral & Cut Weldon Flats (upon request) Square & Ballnose End P M K S H RIGHT HAND - Extended Neck - Flute D / / / D -/ -/ -/ D / / / D L -/ -/ -/ Right Hand - Extended Neck - Flute L -/ -/ -/ RIGHT HAND - Extended Neck - Flute D D L -/ L REACH 0 L REACH L REACH L L D -/ 7-/ -/ -/ -/ 0-/ -/ -/ -/ -/ -/ 0-/ 7-/ 9-/ -/ L 7-/ 9-/ -/ PM0,, 0 PM-FAS.Y PM-FAS.Y PM-FAS.Y PM-FAS.Y PM-FAS.Y PM-FAS.Y PM-FAS.0Y PM-FA0S.X PM-FA0S.X PM-FAS.X PM-FAS.X PM-FAS.X PM-FAS. PM-FAS. PM-FAS. PM-FAS. PM-FAS. PM-FAS. L Rougher is ideal for high performance machining of hard materials. L T-PM-FAS.Y T-PM-FAS.Y T-PM-FAS.Y T-PM-FAS.Y T-PM-FAS.Y T-PM-FAS.Y T-PM-FAS.0Y T-PM-FA0S.X T-PM-FA0S.X T-PM-FAS.X T-PM-FAS.X T-PM-FAS.X T-PM-FAS. T-PM-FAS. T-PM-FAS. T-PM-FAS. T-PM-FAS. T-PM-FAS. L D Ball End PM-FBS.Y PM-FBS.Y PM-FBS.Y PM-FBS.Y PM-FBS.Y PM-FBS.Y PM-FBS.0Y Ball End PM-FB0S.X PM-FB0S.X PM-FBS.X PM-FBS.X PM-FBS.X PM-FBS. PM-FBS. PM-FBS. Ball End PM-FBS. PM-FBS. PM-FBS. Internal Coolant xd - 0xD () 9-79

Speeds and Feeds for High Performance Milling ( Series, Series and 7 Series) SIDE MILLING SLOTTING ADC ADC Series Speeds & Feeds for High Performance Milling RDC RDC Chipload per Tooth Recommendations (CPT) Material SFM (Vc) / / / / / Profiling Radial (ADC) l (RDC) Slotting Axial (ADC) M M P S K Stainless Steel - 0,, 00 Series, Kovar, Invar Stainless Steel - 0L, L, 7/, /, /, PH Materials Carbon Steels - 000 Series Titanium - AlV, CP Gray Cast Iron 0 00 00 70 00.00.00.00.00.00 Note: These are only recommended starting figures that depend on conditions such as machine and material rigidity, type of coating if any, etc. TESTING IS RECOMMENDED.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD xd xd xd xd xd SIDE MILLING SLOTTING ADC ADC Series Speeds & Feeds for High Performance Milling SFM Chipload per Tooth Recommendations (CPT) Material SFM < Rc SFM > Rc / / / / / RDC Profiling Radial (ADC) l (RDC) RDC Slotting Axial (RDC) l (ADC) P P P M M K K S S Carbon Steels - 000 Series Alloy Steel - 000 Series Precipiation Stainless Steel -7-PH, -PH, -PH Stainless Steels - 00 Series Stainless Steels- 00 Series Gray Cast Iron Ductile Cast Iron High Temp Alloys - Inconel /7, A, Haynes Titanium Cast / Wronght- ALV, ASTM,,, Alpha Beta - 0-0 00-0 0-0- 0-0- 0-0- - 0-0 00-00-00 00-0-00 90-0 0-00 00-0.00.00.00.00.009.000.00.00.00.009.00.007.00.000.00.007.00.009.00.00.009.00.00.009.00.00.00.00.00.00.00.00.00.000.00.00.00.00.00.009.000.00.00.00.00.000.00.00.00.007.007.00.00.00.009.000.00.00.00.00.00.00.00.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD.xD xd xd xd xd xd xd xd xd xd xd xd xd xd xd xd xd xd xd Note: These are only recommended starting figures that depend on conditions such as machine and material rigidity, type of coating if any, etc. TESTING IS RECOMMENDED SIDE MILLING SLOTTING ADC ADC 7 Series Speeds & Feeds for High Performance Milling Chipload per Tooth Recommendations (CPT) RDC RDC Material Hardness Type of Cut Slot SFM (Vc) / / / / (ADC) l (RDC) H Hardened Steels Carbon and Alloy Steels, Tool & Die Steels 0 HRc to HRc Rough Finish 7 00.00.00.00.00.00.00.00.00.00.00.00.00.xD xd.xd.xd P Stainless Steels Difficult to Machine - L, 7- PH, - PH, - PH Less than HRc Rough Finish 0 0.00.00.00.00.00.00.00.00.00.00.007.00.xD xd.xd.xd S High-Temperature Alloys Nimonic, Inconel, Monel, Hastelloy Less than HRc Rough Finish 00 0.00.00.00.00.00.00.00.00.00.00.00.00.xD xd.xd.xd S Titanium Alloys Al-V, Al-. Sn, Al-Sn-Zr-Mo, A-iV-CrMo-Zr, 0V-Fe-Ai, V-Cr-Ai Less than HRc Rough Finish 00 0.00.00.00.00.00.00.00.00.00.00.00.00.xD xd.xd.xd Note: These are only recommended starting figures that depend on conditions such as machine and material rigidity, type of coating if any, etc. TESTING IS RECOMMENDED () 9-79

7

PRECISION CUTTING TOOLS,INC 70 Excelsior Dr. Santa Fe Springs, CA 9070-00--97 --9-79 FAX --9-0 0 Y E A R S I N T H E I N D U S T R Y In-House Coating Committed to our Exclusive Distributors Find one near you >> MEMBER OF UNITED STATES CUTTING TOOL INSTITUTE All PCT EndMills conform to N.A.S. ( National Aeronautic Standard ) 9 Specifications and CNC ( Computerized Numerical Control ) qualified International Organization for Standardization Quality Management & Quality Assurance Copyrights 0 PCT Cutting Tools, Inc. st Edition Titanium and Stainless Steels. All Rights Reserved. Printed in the U.S.A.

2024 © businessdocbox.com Privacy Policy | Terms of Service | Feedback