API Monogram Program. Monogram Program Staff SC Liaison Report 2015 Summer E&P Standards Conference Ivan Pinto, Senior Associate, Monogram-APIQR
|
|
|
- Kerry Wilkins
- 6 years ago
- Views:
Transcription
1 API Monogram Program Monogram Program Staff SC Liaison Report 2015 Summer E&P Standards Conference Ivan Pinto, Senior Associate, Monogram-APIQR
2 Monogram Program Board & Monogram 2020 MONOGRAM 2020 Initiatives to improve Monogram Program quality and improve value of the program to industry stakeholders (Users and Manufacturers) AUDIT PROGRAM INITIATIVES Improve the Monogram Program audit quality, effectiveness and rigor COMMUNICATION INITIATIVES Better education and outreach to stakeholder groups MP-SC liaisons You are better informed, We are better informed
3 The Meaning of the API Monogram The use of the API Monogram on product constitutes a representation and warrantee by the licensed manufacturer that, on the date of manufacture, the product conforms to all applicable, current editions of specifications, standards and requirements of API. Monogram is a protected trademark Monogram can only be used on new equipment License is facility and product specific Licensees must have a API Spec Q1 management system in place Licensees must meet legally enforceable program requirements API regularly audits to all the program requirements
4 Where can you help? COLOR CODING PRODUCTS ELIGIBLE FOR LICENSING (aka LIFs) AUDIT QUESTIONS AUDIT TOOLS & AUDITOR TRAINING MATERIALS
5 Where can you help? Development/Revision of the Specs COLOR CODING Required by S1 for any standard that will be used in the Monogram Program Performed as part of the publication process Identifies auditable requirements criteria for products Used to identify purchaser specified requirements for purchasing guidelines
6 Where can you help? Development/Revision of the Specs PRODUCTS ELIGIBLE FOR LICENSING (aka LIFs) Based on specification and auditable requirements Adequate design, material, inspection, testing and technical requirements
7 Where can you help? Audit Program & Auditors AUDIT QUESTIONS Requirements checklists for audits Based on products identified from the color coding and SC review Give auditors a checklist of requirements to cover based on the specific products AUDITOR TOOLS & TRAINING MATERIALS Recent success with 5CRA Upcoming API Spec 10A auditor training SC5 established a TG on audit effectiveness and developed some outputs Options can include process checklists, presentations on the specs and products, identification of critical processes, gap analysis, etc
8 NCR Website Report nonconforming product, process and QMS concerns to API Monogram-QR at: Nonconformance reporting website: OR Yaw Addae-Mintah at and Aaron Duke at Information kept confidential All complaints investigated and actions taken Website to be updated with process and other information
9 API Monogram-APIQR Programs & ISO 9001: 2015 New version of ISO 9001 due end of this year APIQR will continue to offer accredited QMS certification in conjunction with Licensing and API Spec Q1 certification APIQR transition in 6-months Internal processes, procedures, staff & auditor competence All ISO 9001 certificates transitioned by end of 2018 API SC18 forming TG to evaluate changes
10 API GIS AXIS 2016 CALL FOR PAPERS API GIS Exhibition on International Standards Kuala Lumpur, Malaysia - January 13-15, 2016 Educate the international stakeholders on API standards Upstream Topics Quality Management (Q1, Q2, Life Cycle Management) Monogrammed equipment specifications (wellhead and BOP) Unconventional exploration and production standards Deepwater operations Safety CALL FOR PAPERS and SMEs to participate CONTACT Aaron Duke at dukea@api.org /
11 THANK YOU Do you need new or revised documents color coded? Are you concerned about the products in the Monogram Program? Does your SC want to see the audit questions and review them? Any concerns about audits and gaps in the program? Do you have ideas to assist in auditor training and audits? Interested in more information on API AXIS 2016? Ivan Pinto
APIQR - Monogram Programs Update. January 25, 2018
APIQR - Monogram Programs Update January 25, 2018 History of API Founded in 1919 as the trade association for the oil and natural gas industry Originally headquartered in New York City Primary operations
API Monogram-APIQR Program Updates. Updated June 14, 2017
API Monogram-APIQR Program Updates Updated June 14, 2017 History of API Founded in 1919 as the trade association for the oil and natural gas industry Originally headquartered in New York City Primary operations
AxiomLogics. Auditing Consulting Staffing Training. One Stop QUALITY
AxiomLogics Auditing Consulting Staffing Training One Stop QUALITY Auditing INDEPENDENT ASSEMENT OF CONFORMNACE Business dictionary describes Quality Audits as Periodic verification by a competent authority
API Q2 FOR THE PETROLEUM & NATURAL GAS INDUSTRY
API Q2 FOR THE PETROLEUM & NATURAL GAS INDUSTRY Learning Outcomes By the end of this learning event, you will be able to: Summarize the events that led to the development of API Spec Q2. Discuss the operator
ISO and UAV Audits Preparation and Client Rights
1 ISO 13485 and UAV Audits Preparation and Client Rights Medical Devices Quality Management Systems Requirements for Regulatory Purposes 24301 Woodsage Dr. Bonita Springs, FL 34134 (239)-307-6060 www.promedic.cc
Overview of Draft API Standard 20M
Overview of Draft API Standard 20M Qualification of Suppliers of Machining Services for Use in the Petroleum and Natural Gas Industries API STANDARD 20M Slide 1 of 9 Overview Standard 20M provides methods
INSERT COMPANY NAME/LOGO HERE
This checklist is based on the information provided in the 2016-11 revision of the AS 9110 Rev C, SAE international aerospace standard. The checklist is best used by trained and practicing auditors to
Procedure 14 Internal Audits
Procedure 14 Internal Audits Table of Contents 1 Introduction... 2 2 Audit Planning... 2 2.1 Head Office... 2 2.2 Critical Locations... 3 3 Conducting the Audit... 3 4 Non-conformances... 3 5 Client file
API Upstream Standard Development - Supply Chain Management. Rick Faircloth Chairman SC20
API Upstream Standard Development - Supply Chain Management Rick Faircloth Chairman SC20 1 SC20 Supply Chain Management API SC20 Meeting is scheduled for Thursday (8:30-12:00 AM) If you have a new subject
Procedure for Conducting Audits and Management Reviews
Procedure for Conducting Audits and Management Reviews 1.0 Purpose This procedure establishes the method by which Quality System audits and management reviews are performed within the State Crime Laboratory
PG&E Gas Operations. Gas Safety Excellence API 1173
PG&E Gas Operations Gas Safety Excellence API 1173 Gas Safety Excellence Framework PG&E Confidential 2 Our Strategic Drivers Why did PG&E Gas Operations launch and sustain Gas Safety Excellence? Provide
DECISION TO ACCREDIT
DECISION TO ACCREDIT Determine the requirements of the regulator, legislation and customer s needs prior to deciding on the standard to implement. Process is based on the following: Top management s decision
ASME NQA-1 Certification. Matthew Vazquez September 4, 2017
ASME NQA-1 Certification Matthew Vazquez September 4, 2017 NQA-1 Certification The ASME NQA-1 Certification Program seeks to meet the needs of the nuclear industry by expanding the supply chain with organizations
ISO 13485: :2015 CLIENT TRANSITION CHECKLIST
- 9001:2015 CLIENT TRANSITION CHECKLIST Audit Conclusions: All requirements have been addressed. The organization is recommended for ISO 13485:2016 certification. Recommendation for registration is dependent
Technical Services Document #: TS-0007 Internal Audit Procedure Version #: 01
1. Purpose The purpose of this procedure is to define the process used to manage the Internal Audits of the Quality Management System for Technical Services. 2. Scope This procedure applies to all Internal
Sections of the Standard. Evidence / Comments. (Y) / Nonconforming (NC)
Date: Sections of the Standard 4 Context of the Organization 4.1 Understanding the organization and its context 4.2 Understanding the needs and expectations of interested parties 4.3 Determining the scope
KENYA ACCREDITATION SERVICE
KENAS-TS-OP-005 03 17/08/2018 17/09/2018 OP 1 of 7 Approval and Authorization Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
IATF 16949:2016 TRANSITION INFORMATION
IATF 16949:2016 TRANSITION INFORMATION ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements
IATF - International Automotive Task Force IATF 16949:2016 Frequently Asked Question (FAQ)
:2016 Frequently Asked Question (FAQ) :2016 1 st Edition was published in October 2016. In response to questions from the IATF recognized certification bodies and stakeholders, the following questions
Supplier Audit Procedure /2/17
1.0 Purpose The purpose of this procedure is to establish a process for conducting a Supplier audit to determine if the Supplier has a quality system, if the Supplier follows an established quality system,
Quality Manual ISO 9000:2015. FMB Oxford Limited Units 1-4 Ferry Mills, Osney Mead, Oxford, OX2 0ES, United Kingdom. ISO Quality Manual
ISO 9000:2015 FMB Oxford Limited Units 1-4 Ferry Mills, Osney Mead, Oxford, OX2 0ES, United Kingdom. ISO 9001 2015 Quality Manual Contents 1 Scope 3 2 Applicable Standard 3 3 Terms and Definitions 3 4
INTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT
INTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT M a r ch 2015 OBJECTIVE ISO and Project Quality Management Process Are they different or the same? ISO 9000 QMS FAMILY ISO 9000:2005 Vocabulary
Control of Internal Auditing
1 Introduction 1.1 Scope Control of Internal Auditing This procedure sets out s controls and methods for conducting internal management system audits. 1.2 Revision History Revision Date Record of Changes
IMPORTANCE OF AUDITING ISO 9001: 2015
IMPORTANCE OF AUDITING ISO 9001: 2015 PMI, PMP, PMBOK and the PMI Registered Education Provider logo are registered marks of the Project Management Institute, Inc. At the end of the class, please fill
IAQG 9101:2014 (Rev. E)
IAQG 9101:2014 (Rev. E) Changes Overview Conformity plus Performance Equals Effectiveness Prepared by the IAQG 9101 team 2014-04-08 Presentation Objectives Part One: Provide Overview of 9101:2014 (Rev.
Conduct a More Effective Management Review. Rob Packard, Consultant
Conduct a More Effective Management Review & Slide 1 of 31 Your Speaker Rob Packard Rob Packard is a regulatory consultant with 20 years experience in the medical device, pharmaceutical and biotechnology
AB. OUR ISO CONFORMANCE AUDIT QUESTIONNAIRES 8. ASSESS HOW WELL YOU CONFORM TO ISO S REMEDIAL REQUIREMENTS
8.1 PLANNING REQUIREMENTS 1 Do you plan monitoring, measurement, and analytical processes? 2 Do you plan how monitoring will be used to ensure conformity and effectiveness? 3 Do you plan how it will be
SOFTWARE QUALITY ASSURANCE (SQA) Chapter 2
SOFTWARE QUALITY ASSURANCE (SQA) Chapter 2 Objectives After completing this chapter, you shall be able to Explain what is QMS? Understand and define what is Quality policy Understand the expectations of
Clause Map IATF 16949:2016 to ISO/TS 16949:2009
Table of Contents Table of Contents Foreword Foreword + Foreword Automotive QMS Standard + History + Goal + 0.5 Goal of this Technical Specification + Remarks for Certification + Remarks for Certification
Program Management Procedure. Quality Management System
LACCD Bond Program Program Management Procedure Quality Management System Procedure Number: PM 9.0 Effective Date: Total Pages: 10 Controlled Document No.: SharePoint Copy 1.0 Purpose Quality is an integral
SPECIAL AUDITS WHAT, WHY AND HOW?
SPECIAL AUDITS WHAT, WHY AND HOW? Mike McRandall and Don McFarland (NSF-ISR) Introductions: Mike McRandall NSF-ISR Business Unit Manager, Aerospace mmcrandall@nsf.org Don McFarland NSF-ISR Technical Scheme
SUPPLIER QUALITY SYSTEM SURVEY
SUPPLIER QUALITY SYSTEM SURVEY DATE (M/d/yy): 55 Dragon Court Woburn, MA 01801 Tel: (781) 933-7300 Fax: (781) 935-4529 GENERAL INFORMATION Supplier Name: Physical Address: City: State: Zip: Sr. Company
Qualified Specialists, LLC
Click to transition to the next slide. 2014 Contents Who We Are... Page 2 What We Do... Page 3 Services Consulting... Page 4 Training... Page 5 Technology... Page 6 Page 1 Click to transition to the next
I. Development, Submittal, and Acceptance of a Quality Management System
I. Development, Submittal, and Acceptance of a Quality Management System 1. Scope Under the Contract, quality assurance and quality control management are the responsibility of the Contractor. The Contractor
How to conduct Stage 1 and Stage 2 Audits
How to conduct Stage 1 and Stage 2 Audits As per ISO 9001 2015 & ISO 19011 FREE Professional Development Seminar Series At the end of the class, please fill the training feedback and referral forms! Return
IATF - International Automotive Task Force IATF 16949:2016 Frequently Asked Question (FAQ)
:2016 Frequently Asked Question (FAQ) :2016 1 st Edition was published in October 2016. In response to questions from the IATF recognized certification bodies and stakeholders, the following questions
IATF - International Automotive Task Force IATF 16949:2016 Frequently Asked Question (FAQ)
:2016 Frequently Asked Question (FAQ) :2016 1 st Edition was published in October 2016. In response to questions from the IATF recognized certification bodies and stakeholders, the following questions
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry ANSI/API SPECIFICATION Q1 EIGHTH EDITION, DECEMBER 2007 EFFECTIVE DATE: JUNE 15, 2008 CONTAINS API MONOGRAM
TITLE: COFL GTL EP Evaluation of Compliance Procedure
TITLE: COFL GTL EP 4.5.2 1 Evaluation of Compliance Procedure Verification Originator Approved Issued Initials MRA ST ST Date 9/29/2014 12/15/2014 12/15/2014 Persons responsible: Areas of application:
EN39 TUBE ASSESSMENT REPORT. Assessment Summary
EN39 TUBE ASSESSMENT REPORT : Category: Manufacturer Manufacturer Manufacturer Manufacturer Location: Name: Location Location Location Location Previous Assessment Category: N/A Meeting With: Assessment
ISO 9001:2015 Auditor Transition (QMS)
Please email this form, together with all supporting documents to Your details All parts of this application must be completed in BLOCK CAPITALS and in English. If you need more space than the form allows
Green Product Mark Certification Scheme
Green Product Mark Certification Scheme www.tuv.com FOREWORD Product environmental labels are claims regarding the environmental impact of a product. They provide information about the product s overall
Conducting Quality Audit based on ISO 9001:2015
Conducting Quality Audit based on ISO 9001:2015 FREE Professional Development Seminar Series At the end of the class, please fill the training feedback and referral forms! Return the form at the reception!
ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing
INTERNATIONAL STANDARD ISO/IEC 17043 First edition 2010-02-01 Conformity assessment General requirements for proficiency testing Évaluation de la conformité Exigences générales concernant les essais d'aptitude
BS2482 TIMBER BOARDS ASSESSMENT REPORT. Assessment Summary
BS2482 TIMBER BOARDS ASSESSMENT REPORT : Category: Manufacturer Manufacturer Manufacturer Manufacturer Location: Name: Location Location Location Location Previous Assessment Category: N/A Meeting With:
Supplier Audit Procedure /20/17
1.0 Purpose The purpose of this procedure is to establish a process for conducting a Supplier audit to determine if the Supplier has a quality system, if the Supplier follows an established quality system,
SADCAS POLICY ISO/IEC 17020:2012 TRANSITION
SADCAS POLICY ISO/IEC 17020:2012 TRANSITION Prepared by: SADCAS Approved by: SADCAS CEO Approval Date:2012 09 25 Effective Date: 2012 10 01 Page 1 of 11 Table of Contents Page 1. INTRODUCTION... 3 2. TRANSITION
GUYANA NATIONAL BUREAU OF STANDARDS SCHEDULE OF TRAINING PROGRAMMES FOR MARCH TO DECEMBER 2018 Manufacturing and Service Organisations
GUYANA NATIONAL BUREAU OF STANDARDS SCHEDULE OF TRAINING PROGRAMMES FOR MARCH TO DECEMBER Manufacturing and Service Organisations NO. TITLE OF THE COURSE PROPOSED DATES TARGET GROUP EXPECTED OUTCOMES COST
Performing independent technical inspections worldwide...
Performing independent technical inspections worldwide... The is a leading international provider of independent technical inspections, surveys and engineering support to oil & gas exploration and production
Responsible Care - chemical industry s global initiative
Overview Create an autonomous, industry managed Safety Institute. Institute must function, and be perceived, as only one mission.. drive industry safety and risk management behavior ever higher. It can
BS EN ISO 9001 QUALITY ASSURANCE MANUAL
PAC PRICE ARTHUR CONSULTANCY BS EN ISO 9001 QUALITY ASSURANCE MANUAL COPY NO: 025 ISSUE: 4 QUALITY ASSURANCE MANUAL BS EN ISO 9001 CONTENTS PAC Price Arthur Consultancy - Building Services Consulting Engineers
Required Elements of a Quality Management System
Quality Management System Review Procedures IAPMO Evaluation Service (IAPMO UES) No.: ES-010 Title: Review Procedures for Certified Manufacturer s Quality Management System (QMS) Documentation By: B. Berneche
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry ANSI/API SPECIFICATION Q1 NINTH EDITION, XXXX 2012 EFFECTIVE DATE: XXXX 2012 + 6 Months iii Contents Page Special
APS Cleaning. Environmental Management System. Scope of Certification
Environmental Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland. Table of Contents Contents 1. Introduction... 3 1.1. The Environmental
SUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS
SUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS 1 INTERPRETATION... 1 1.1 Definitions... 1 2 QUALITY MANAGEMENT SYSTEM... 2 2.1 Quality Management
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9000 Third edition 2005-09-15 Quality management systems Fundamentals and vocabulary Systèmes de management de la qualité Principes essentiels et vocabulaire Reference number
We are a global classification, certification, technical assurance and advisory company Ungraded
We are a global classification, certification, technical assurance and advisory company 1 Global reach local competence 150 300 100 15,000 years offices countries employees 2 DNV GL :: Focused on your
Quality system implementation from a manufacturers viewpoint
OD005 IECEx Quality System Requirements for Manufacturers Quality system implementation from a manufacturers viewpoint Evans Massy Rockwell Automation October 3, 2005 31/10/2005 1 1515 1545 Manufacturer
Conformity assessment and ISO CASCO for standards writers
Conformity assessment and ISO CASCO for standards writers Content What is conformity assessment? What is ISO/CASCO? What is the ISO/CASCO Toolbox? ISO/IEC Directives, Part 2, Clause 6.7 What is conformity
Lucas UK Group Limited Quality Management System
Lucas UK Group Limited Quality Management System Index Revision Log Register of Holders 1. Introduction and Scope 2. Quality Policy and Objectives 2.1 Key Quality Objectives 3. Lucas UK Group Organisation
ISO 9001:2015 Revision overview
ISO 9001:2015 Revision overview - General users July 2014 ISO/TC 176/SC 2/N1219 1 Disclaimers verbal statements made by the presenter may represent personal opinions and/or interpretations the presentation
Conformity Assessment - Requirements for the Operation of Various Types of Bodies Performing Inspection
ISO 17020 White Paper for Conformity Assessment - Requirements for the Operation of Various Types of Bodies Performing Inspection Lakshy Management Consultant Pvt Ltd aiming excellence www.lakshy.com WHAT
ISO Client Program and Audit Manual
1 Great Western Registrar LLC ISO Client Program and Audit Manual Based on the requirements of ISO17021 and Associated ANAB Accreditation Rules 04/02/2018 Created and Approved by: Karey S. Yates, President/Owner
Global Manager Group
ISO: 14001- Wise audit Questionnaire 4. Context Of the Organization 4.1 Understanding the Organization and its context 1) 2) 3) Have you determine external and internal issues in the Environment management
INTRODUCTION TO ISO 9001:2015. A One-Day Awareness On ISO 9001:2015 Quality Management Systems And The Impact On The Work Place
Course no.: ISO 01 INTRODUCTION TO ISO 9001:2015 A One-Day Awareness On ISO 9001:2015 Quality Management Systems And The Impact On The Work Place What is Quality What is ISO 9001:2015 a Quality Management
ISO 14001:2015 Gap Analysis Check Sheet
? CONTEXT OF THE ORGANIZATION 4.1 Understanding the organization and its context The organization shall determine external and internal issues that are relevant to its purpose and that affect its ability
Canyon Lumber Company Inc SFI Surveillance Audit
Canyon Lumber Company Inc. 2016 SFI Surveillance Audit From May 16-17, 2016 an audit team from KPMG Performance Registrar Inc. (KPMG PRI) carried out an SFI surveillance audit of Canyon Lumber Company
GE Oil & Gas Quality Management System Pressure Control Supplier Quality Requirements Heat Treatment Services SQ-07 Rev: 2.0
Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to describe the changes and additions each time this document is re-published. The description
ISO 9001:2015 Expectations
The ISO 9001:2015 Standard was published September 15, 2015. The Standard is written such that it may be used by any organization type for the purpose of implementing and maintaining a Quality Management
Canyon Lumber Company Inc SFI Re-certification Audit
Canyon Lumber Company Inc. 217 SFI Re-certification Audit From May 9-11, 217 an audit team from KPMG Performance Registrar Inc. (KPMG PRI) carried out an SFI Re-certification audit of Canyon Lumber Company
ISO 9001:2015 Gap Analysis Check Sheet
CONTEXT OF THE ORGANIZATION 4.1 Understanding the organization and its context Organization shall determine external and internal issues that are relevant to its purpose and strategic direction and that
14620 Henry Road Houston, Texas PH: FX: WEB: QUALITY MANUAL
14620 Henry Road Houston, Texas 77060 PH: 281-447-3980 FX: 281-447-3988 WEB: www.texasinternational.com QUALITY MANUAL ISO 9001:2008 API Spec Q1, 9th Edition API Spec 8C 5 Th Edition MANUAL NUMBER: Electronic
The Standard Illustrations ISO The International Standard for Quality Management Systems. Year 2000 Edition. Leland R.
ISO 9001 The Standard Illustrations The International Standard for Quality Management Systems Year 2000 Edition Leland R. Beaumont ISO 9001, The Standard Illustrations Figures excerpted from ISO 9001,
Transition Strategy for VDA 6.1, VDA 6.2 and VDA 6.4. Revision January Contents. 1. Foreword
Transition Strategy for.1,.2 and.4 Revision 1.0 --- 06. January 2017 Contents 1. Foreword 2. Transition timing requirements to the relevant.x standards 3. Transition audit requirements to the relevant.x
APS Cleaning Quality Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland.
Quality Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland. Table of Contents Contents 1. Introduction... 3 1.1. Process Approach...
The IFSQN FSSC Implementation Package Start Up Guide
Welcome to the IFSQN FSSC 22000 Food Safety Management System Package Start Up Guide which will guide you through the contents of the package. The IFSQN FSSC 22000 Implementation Package includes: Food
RABQSA Certified Occupational Health and Safety Management System Lead Auditor Training Course
Day 1 8:00 a.m. Module 1: Introduction and Course Objectives Student Evaluation Getting to Know Each Other Review I Can documents (completed precourse) Module 2: Management System Auditor Certification
Version 2 November Code of Practice. Consignment Based Conformity Assessment (CBCA) Services
Code of Practice Consignment Based Conformity Assessment (CBCA) Services November 2012 PREFACE Many developed countries have strong National Standards and Technical Regulations supported internally with
ISO/DIS9001:2008 VS ISO9001:2000. Speaker: Ir. Dr. Aaron TONG Date:
ISO/DIS9001:2008 VS ISO9001:2000 Speaker: Ir. Dr. Aaron TONG Date:2008-08-01 1 Outline Background Information of ISO/DIS 9001 : 2008 Main Changes of 2008 Edition What we should do? Q & A Section 2 Ir.
HKQAA Certification Guide
HKQAA Guide Introduction Thank you for choosing HKQAA as your certification partner. In order to help your organization to go through the certification process as smoothly as possible, and to help HKQAA
Leveraging ISO s Quality Management System to Achieve 24/7 Inspection Readiness. Randy Querry Accreditation Manager Clinical
Leveraging ISO 15189 s Quality Management System to Achieve 24/7 Inspection Readiness Randy Querry Accreditation Manager Clinical Goals Provide brief background on A2LA Differentiate between CLIA and ISO
FDA 21 CFR Part 820 vs. ISO 13485:2016 Comparison Table created by greenlight.guru
FDA 21 CFR Part 820 vs. ISO 13485:2016 Comparison Table created by greenlight.guru FDA QSR (21 CFR Part 820) ISO 13485:2016 820.1 Scope 1 Scope 2 Normative References 820.3 Definitions 3 Terms and Definitions
Current Quality. Culture. Mini Paper IE 361
Current Quality Culture Mini Paper IE 361 I. Introduction ISO 9001 The International Organization for Standardization (ISO) was established in 1946 to promote the development of standardization and related
ISO 9001:2015 Certification. What is it, why we did it, and what this means to you
ISO 9001:2015 Certification What is it, why we did it, and what this means to you What is ISO 9001:2015 ISO International Organization for Standardization worldwide federation of 162 national standards
2007 Summer Meeting AASHTO Highway Subcommittee on Construction Project Quality for Design- Build
2007 Summer Meeting AASHTO Highway Subcommittee on Construction Project Quality for Design- Build by Bob Burns Quality Program Manual Requirements ISO 9001:2000; Third Edition and the guide for ISO 9004
HACCP audit checklist
Requirement HACCP audit checklist Prerequisite Program Management Commitment 1. Senior management ensures that the responsibilities and authorities are defined and communicated within the company Internal
CHECKLIST MODULE 1. PrimusGFS v3.0 FSMS. Powered by Azzule Systems. primusgfs.com azzule.com. PRIMUSGFS v3.0 MODULE 1: FSMS
2 018 An internationally recognized Global Food Safety Initiative (GFSI) food safety audit scheme PrimusGFS v.0 MODULE 1 FSMS Food Safety Management System Requirements POWERED CONNECTED SMART SUPPORTED
SUPPLIERS AND SUBCONTRACTORS
Page: 1 of 8 SUPPLIERS AND ISSUE STATUS Issue Date: 11-04-2016 Issued for Use Revision Date: 30-01-2017 Revision No.: 1 Action Position Issued By: Reviewed By: Reviewed By: Approved By: QESH Document Controller
Bob Alisic. ActinQ. Lisbon, December, 13 th, Part of slides was provided by Nigel Croft. V9-web
Bob Alisic ActinQ Lisbon, December, 13 th, 2012 V9-web Part of slides was provided by Nigel Croft 25 years of ISO 9001 ISO 9001 ISO 9002 ISO 9003 ISO 9001 ISO 9002 ISO 9003 ISO 9001 ISO 9001 ISO 9001 ISO
VERIFICATION & VALIDATION. Co-X/FBO/SOP02
CONVENTION & EXHIBITION (PUTRAJAYA) SDN. BHD. Co-X/FBO/SOP02 Revision No.: 02 Effective Date: 1 st November 2017 ` PREPARED BY REVIEWED BY APPROVED BY Name: Name: Name: Position: Position: Position: DEPARTMENT
The Gap Analysis Checklist. Quality Manual, Procedures and Forms
The Gap Analysis Checklist This list has been prepared for you by The 9000 Store. You will need to have a copy of the ISO 9001:2008 Standard to use along with this checklist. There are some spaces on the
Quality and Environmental Business Process Manual
PMC SOIL SOLUTIONS 2 Fountain Court Victoria Square St Albans Hertfordshire AL1 3TF T: 01727 822500 F: 01727 821600 E: headoffice@pmcsoilsolutions.com W: www.pmcsoilsolutions.com Quality and Environmental
Conducting Quality Audit based on ISO 9001:2015
Conducting Quality Audit based on ISO 9001:2015 FREE Professional Development Seminar Series NITIN HIRANANDANI ME (MECHANICAL) ASQ CMQ/OE, OSHAD Practitioner CORPORATE TRAINER FOR LA, ASQ CMQ/OE, QUALITY
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry (Draft 10)
Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry (Draft 10) ANSI/API SPECIFICATION Q1 NINTH EDITION, XXXX 2012 EFFECTIVE DATE: XXXX 2012 + 6 Months \iii Contents
REGULATORY SYSTEMS IN KENYA & EAC KEBS PERSPECTIVE
REGULATORY SYSTEMS IN KENYA & EAC KEBS PERSPECTIVE PRESENTATION BY: JOHN KABUE ASSISTANT MANAGER QUALITY ASSURANCE Email: kabuej@kebs.org Tel: +254 020 6948000/ 605490 MANDATE KEBS is a statutory organization
HOW TO CONDUCT THE INTERNAL AUDITS EFFECTIVELY
HOW TO CONDUCT THE INTERNAL AUDITS EFFECTIVELY As per ISO 9001 2015 & ISO 19011 PMI, PMP, PMBOK and the PMI Registered Education Provider logo are registered marks of the Project Management Institute,
New 03/10/31 CHAPTER 3, SUBJECT 5 FSEP/QMP AUDIT POLICY FOR MULTI-COMMODITY ESTABLISHMENTS
3 5 1 CHAPTER 3, SUBJECT 5 FSEP/QMP AUDIT POLICY FOR MULTI-COMMODITY ESTABLISHMENTS 1. SCOPE This policy outlines the procedures for integrating audits of the Food Safety Enhancement Program (FSEP) and
AS&D Client Program and Audit Manual
1 Great Western Registrar LLC AS&D Client Program and Audit Manual Based on ISO 17021, AS9104, Associated ANAB Accreditation Rules & ICOP Resolutions 04/02/2018 Created and Approved by: Karey S. Yates,
COMPLETED QUALITY SYSTEMS QUESTIONNAIRE
COMPLETED QUALITY SYSTEMS QUESTIONNAIRE Section I Introduction: SUPPLIER: Qualiseal Technology Phone (708) 887-6080 7319 West Wilson Ave. Fax (708) 887-8854 Harwood Heights, IL 60706 General Manager: Rob
Perry Johnson Registrars, Inc. Licensed Copy #2 RECYCLING INDUSTRY OPERATING STANDARD. Prepared for ISRI Services Corporation
RECYCLING INDUSTRY OPERATING STANDARD Prepared for ISRI Services Corporation NOT FOR DISTRIBUTION FOR PERRY JOHNSON REGISTRARS, INC. ONLY: LICENSED COPY #2REVISED MARCH 2006 CONTENTS RIOS GLOSSARY... I