OFFICE USE ONLY. Building Permit #: Tax Roll #:

Transcription

1 OFFICE USE ONLY Building Permit #: Tax Roll #: Permit Fee: Penalty Fee: BUILDING PERMIT APPLICATION ALSC Fee: BP Conformity Review Fee: $76.13 Phone: (403) Engineering Fee: Offsite Levies: Bear Bin Fee: Voluntary Rec. Contribution: Total: Permit For: Description of Work: New Construc on Renova on Demoli on Repair Existing Use of Land/Building: Civic Address: Legal Description: Lot/Unit: Block: Plan: Other Legal: Development Permit #: Road Use / Excavation Permit Required: Yes No (Office Use) 10 Min Response Time: Outside Inside BP Checklist Complete: Yes No Cost of Work (to the nearest $1000): (Office Use) Assessed Value: Registered Owner: Mailing Address: Phone: Applicant/Contact Person: Postal Code: Mailing Address: Phone: Postal Code: Contractor: Mailing Address: Phone: Postal Code: I/we hereby make application for a Building Permit pursuant to the Building Permit Bylaw of the Town of Canmore. I certify that I am the named Registered Owner or the Registered Owner's agent in this application. Date: Date: Applicant Name: Registered Owner's Name: Signature: Signature: FOIP Notification: "The collection of personal information is being carried out in accordance with the Freedom of Information and Protection of Privacy (FOIP) Act section 33c. Its use, retention and destruction will also be in accordance with the FOIP Act. If you have any questions relating to the collection of this information please contact the Municipal Records Officer for the Town of Canmore by telephone at , 902 7th Avenue, Canmore, T1W 3K1. Safety Codes Officer Name: Date: Signature: D#: How did we do today? planning@canmore.ca let us know!

2 CHECKLIST All plans must be to scale and include metric measurements. NEW CONSTRUCTION Proof of authorization to construct on the property. The owner must sign the application form and either a copy of title or purchase agreement must be submitted. TWO sets of plans and specifications AND an electronic copy in PDF format (including floor area calculation and unit sizes for projects with a residential component). Refer to the 2010 Engineering Design & Construction Guidelines to ensure you have met all Engineering Services requirements. THREE Surveyed Plot Plans (at least two of which must be originals), showing the location of the proposed construction. ONE 11"x17" Site Plan/Landscape Plan. ONE Foundation Plan Manufacturer's shop drawings for engineered floor and roof framing systems OR a letter of engagement from a structural engineer to review the plans and issue a letter of compliance. Letter of engagement from the engineer who will review the soil conditions, make recommendations for the footings and issue a letter of compliance. Fire Safety Plan (should you have any questions regarding this please contact the Assistant Fire Chief in charge of Prevention and Fire Safety). Third Party Green Building certification acceptable to the Town of Canmore or undertake the Town of Canmore Green Building Procedure (as outlined in Part 7 of the Land Use Bylaw). The required fees. Bear bin contribution or offsite levies may also be due. Bow Valley Construction Waste Diversion form (or indicate that this has already been submitted to the Bow Valley Waste Management Commission). Confirm Fortis and Atco have been notified Proof of warranty coverage under New Home Buyer Protection Act MISCELLANEOUS CONSTRUCTION Proof of authorization to construct on the property. The owner must sign the application form and either a copy of title or purchase agreement must be submitted. TWO sets of plans and specifications AND an electronic copy in PDF format (including floor area calculation and unit sizes for projects with a residential component). Refer to the 2010 Engineering Design & Construction Guidelines to ensure you have met all Engineering Services requirements. TWO Surveyed Plot Plans (at least one of which must be an original), showing the location of the proposed construction. OR site information in another form (site plan) that clearly indicates the development is in accordance with the regulations. Manufacturer's shop drawings for engineered floor and roof framing systems OR a letter of engagement from a structural engineer to review the plans and issue a letter of compliance. Letter of engagement from the engineer who will review the soil conditions, make recommendations for the footings and issue a letter of compliance. The required fees. For some projects bear bin contribution or offsite levies may be due. Bow Valley Construction Waste Diversion Form or indicate that this has already been submitted to the Bow Valley Waste Management Commission. Confirm Fortis and Atco have been notified (if necessary) Complete Asbestos Abatement form (in buildings to be renovated or demolished) OTHER If access is needed across a Municipal Reserve, an application for a Permit to Cross a Public Reserve must be submitted and approved by the Town's Parks Department. Please note that this permit may not be granted in all cases. If use of the road right-of-way is required, a Road Use Right-of-Way permit application form must be submitted and approved by the Town's Engineering Services Department. Note that the road right-of-way includes all public roadways, sidewalks, rightof-ways, utility right-of-ways or public parking lanes and lots. Any proposed use of the road right-of-way should be minimized. If you need to work on a Sunday or Statutory Holiday, you must first submit a Permission To Work application form to the Town of Canmore s CAO s office for approval.

3 Municipal Bylaw Business Registry Building Trade List 902 7th Avenue, Canmore, AB T1W 3K1 Phone Fax businessregistry@canmore.ca Licence No. Print Form FORM BL412 REV AUG 11/14 General Contractor Customer ID Contact Person BP No. Phone Number For Office Use Only Civic Address of Development Demolition General Contractors must ensure that ALL Trades and Sub-trades are Registered as per Bylaw Trade Check if Supplier Only Company and/or Name of Sub-Contractor Phone Business Lic. No. Excavating Backfilling Grading Paving Cribbing Concrete Formwork Rebar Tarring Crane Structural Steel Misc. Metal Fabrication Metal Decking Framing Wood Trusses Roofing Louvers Vents Insulating Millwork Electrical Plumbing Fireplace Masonry This is a transitory document used to create your electronic file and will be destroyed after 1 year.

4 Trade Check if Supplier Only Company and/or Name of Sub-Contractor Phone Business Lic. No. HVAC Vacuum Conc. Slabs Drywall Siding Windows Finishing Flooring Painting Doors Ceramic Tile Stucco Gutters Cabinets Land Scaping Decorating Other Other Town Of Canmore Bylaw Business Registry Section II (k) Building Trade List shall mean a mandatory list attached to all building permit application forms from the Town of Canmore Planning and Development Department. The list is to be filled out by the home owner, business owner or Agent hired by the homeowner or business owner. (All leaseholds renovations or new developments) Section II (q) General Contractor means the business of accepting contracts for the erection, alteration, construction, repair of the buildings or structures of any kind or the person or firm engaged in such business, as the context requires; and includes any owner of property who supervises the erection, construction, alteration and the repair of the buildings or structures where a general contractor is not engaged is such a project. Section II (jj) Sub-Contractor means a person providing sub-contract services to a General Contractor in relation to a particular trade, project or contract. Section IV paragraph 17. All licences issued pursuant to this bylaw shall be posted in a conspicuous place on the business premises of the licensee, so as to be clearly visible to the public. For the businesses that are not carried on at a fixed location, the registration form must be: (a) carried on the person of the Licence; or (b) carried in or on the vehicle or apparatus from which such business is conducted. and shall be shown to the Officer, Business Registry Licence Coordinator or members of the public upon demand. Section IV paragraph 20. A general contractor shall be responsible for ensuring that all of its Trades, Sub-Trades and Sub-Contractors hold a valid Business Registry Licence. A General Contractor shall be charged twice the resulting fees or penalties in relation to its unlicensed Trades, Sub- Trades, and Sub-Contractors pursuant to the terms of this Bylaw. If the General Contractor pays to fees of the Business Registry Licence for the Trades, Sub-Trades, and/or Sub-Contractors that have worked, will work or that are already working on site then the licences will go to the General Contractor. Business Licence Application Forms can be obtained from the Town of Canmore website at: Temporary Licenses are available for Non-Resident Businesses - Phone or Businessregistry@canmore.ca This is a transitory document used to create your electronic file and will be destroyed after 1 year.

5 ASBESTOS ABATEMENT FORM BUILDING DEMOLITION/RENOVATION Project address: Legal Description: Lot/Unit Block Plan I hereby give assurance that all materials having the potential for releasing asbestos fibres have been removed from the project area to be renovated or demolished. I confirm that waste materials have been disposed of in an approved landfill site as required by Alberta Environment. OR I hereby give assurance that there are no materials having the potential for releasing asbestos fibres in the project area to be renovated or demolished. Name: Signature: Address: Phone: Date: Asbestos abatement requirements are located in the Occupational Health and Safety (OHS) Code administered by Workplace Health and Safety (Alberta Employment and Immigation). Occupational Health and Safety legislation requires anyone beginning an asbestos project to notify Workplace Health and Safety at least 72 hours before work starts.

6 Additional Information Do I need a Building Permit to perform asbestos abatement work? No. A Building Permit is not a permit to perform asbestos abatement work. Rather, this form is required as part of your Building Permit application and serves as notification to alert Building Regulations that asbestos abatement will be undertaken. Limited demolition or construction is expected during asbestos abatement work and jurisdiction for this work is with the Government of Alberta. What happens if I find asbestos after I already have a permit? In the event that asbestos is discovered, or a change to your scope of work has resulted in the potential for releasing asbestos for a project that already has a permit, you are expected to: 1. immediately stop work; and 2. address the asbestos that has been encountered by: a) providing notification as required by OH&S by completing the Asbestos Project Notification form; and b) ensuring asbestos will be dealt with according to OHS requirements; and 3. submit a Building Permit revision to include a revised Asbestos Abatement form acknowledging the removal of asbestos before resuming work pursuant to the Building Permit. For additional information, refer to Standata 06-BCB-006.

7 DRAFT Bow Valley Construction Waste Diversion How-To Guide PURPOSE: The purpose of the guide is to maximize the reduction of waste generated and land filled through new construction and demolition. Land is a scarce resource within the Bow Valley and no new landfill sites are expected to be available once the current site has reached its capacity. Therefore, a significant secondary purpose of this policy is to extend the useful life of the existing Francis Cooke Regional Landfill. This guide has been created in conjunction with the Bow Valley Waste Management Commission s business plan. OVERVIEW: The Bow Valley Construction Waste Diversion Program encourages applicants seeking a Building Permit to meet or exceed the goal of 50% waste diversion. Applicants for a Building Permit are asked to review this guide, and then follow the process as outlined on page 2. Upon completion of the project a Project Waste Diversion Summary, which outlines the amount of waste that was recycled from the project, will be provided by Bow Valley Waste Management Commission (BVWMC). Submit the Project Waste Diversion Summary to the Municipality s Planning Department that approved the Building Permit. The following products can be RECYCLED at the Francis Cooke Regional Landfill: Scrub & Brush Concrete & Masonry Asphalt Wood Products Accepted: Not Accepted: Drywall Metal (includes appliances) Asphalt Shingles Cardboard can be recycled at: Kiln dried, OSB, Engineered Joists, Plywood Pressure Treated, MDF, ACQ, Particle Board BANFF Hawk Avenue CANMORE Boulder Crescent This guide has been produced with a coordinated effort of the following:

8 BENEFITS: There are several reasons to pursue a waste diversion program. Save money the difference in rates between sorted and unsorted materials is significant (2015 rates): Diverted: $45-$50 per tonne (100% of material is recycled to applicable recycling pile) Sorted: $105 per tonne(minimum 50% of material is sorted to applicable recycling pile) Unsorted: $195 - $270 per tonne (mixed load, not sorted to applicable recycling pile) Compliance with waste diversion can result in recognition for your project, certification that can be used in marketing and advancing your project s environmental stewardship. Save time...bvwmc has the ability to track the volume of recycled material through their computerized tracking system, which can help with LEED, BuiltGreen, or other green construction program certification requirements. Extend the life of the Francis Cooke Regional Landfill. PROCESS: 1. Complete a Project ID form (Schedule A ) and submit it prior to the delivery of your first load from your construction site. This form can be submitted to Francis Cooke Regional Landfill by: Fax to (403) ; Scan and to: landfill@bvwaste.ca; or Hand it to the weigh scale staff at the Francis Cooke Regional Landfill. 2. Once the form is submitted a Project ID number/name will be issued. A separate Project ID number/name should be obtained for each project. The project can then be tracked by number or name. 3. Quote the Project ID number / name to the staff at Francis Cooke Regional Landfill whenever a load is taken to the landfill. 4. At the conclusion of the project, notify BVWMC by phone at (403) or by at landfill@bvwaste.ca in order to close out the file. A copy of the waste diversion report will be provided at that time. Provide the waste diversion report to the Development Authority to fulfill requirements of the Building Permit. 5. The resulting summary data may be shared with Bow Valley municipalities for general waste diversion statistics. The shared summary data will be anonymous. Two local waste hauling companies, familiar with this process, can be contacted at: JMB Waste Management (403) Clean Sweep Waste Removal (403) SCHEDULE ATTACHMENT: Schedule A - Project I.D. form This guide has been produced with a coordinated effort of the following: Version: May 2011

9 Bow Valley Construction Waste Diversion Project Identification Form Company: Project Name: Project Address: Municipality: (check one) Commercial/Residential (check one) Project Type: (check one) Town of Banff; Town of Canmore; MD of Bighorn Commercial; Residential Single Family Duplex Schedule A Multi-Family: 3-10 units; units; 50+ units Industrial / Commercial Institutional Renovation / Addition Size of Project: Sq Ft; or Sq M. Special Details: (if required) Start Date: Permit Number: Bow Valley Construction Waste Diversion Project Identification Name / Number: For further information, or any questions, please contact: Francis Cooke Regional Landfill Phone: (403) ; Fax: (403) landfill@bvwaste.ca At the end of the construction project, send Project Waste Diversion Summary to: Fax: Address: This guide has been produced with a coordinated effort of the following: Version: May 2011