KINETICS Restrained Spring Isolators Model FLS-1 and FLS-2

Transcription

1 KINETICS Restraine Isolators Moel FS-1 an FS-2 escription Kinetics Moel FS vibration isolators consist of freestaning, large iameter, laterally stable steel springs assemble into wele steel housing assemblies fabricate to limit vertical movement of the isolate equipment if equipment loas are reuce, or if the equipment is subjecte to large vertical external forces. The housings also provie a constant free an operating height to facilitate installation. elements are complete with internal noise isolation pas an have an ajusting an leveling bolt as a part of the top loa plate assembly. s are polyester power coate, with a 0-hour salt spray rating per ASTM B-1. Holes are provie in all isolators for bolting to the structure an to the supporte equipment. The isolator can be wele to the structure as well. To assure stability, the springs have lateral spring stiffness greater than 1.0 times the rate vertical stiffness, an are esigne to provie a minimum of 50% overloa capacity. FS s are available with eflections to 2" ( ) an with loa capacities to 18,000 lbs. (8 kg) as stanar proucts. Custom isolators with higher eflection an greater loa capabilities are available. Kinetics Moel FS spring isolators are recoene for the isolation of vibration proucing equipment carrying a large flui loa which may be raine, such as boilers an chillers, an for the isolation of outoor components such as cooling towers, air-coole conensers, etc., where win loas are minimal. Application Kinetics Moel FS vertically restraine spring isolation mounts are recoene as a noise an vibration isolator for mechanical equipment locate near critically quiet areas, when the equipment to b e i s o l a t e h a s s i g n i fi c a n t c h a n g e s o f w e i g h t u r i n g maintenance operations, an for equipment subjecte to moerate external forces or win loas. Operating static eflections are available up to 2" ( ) to compensate for long span flexible floor structures an maintain a high egree of noise an vibration isolation. Specification Vibration isolators for equipment which are subject to loa variations an large external or torquing forces shall consist of large iameter, laterally stable steel springs assemble into wele steel housing assemblies esigne to limit vertical movement of the supporte equipment. Housing assembly shall be of fabricate steel members an shall consist of a top loa plate complete with ajusting an leveling bolts, vertical restraints, isolation washers an a bottom plate with internal non-ski noise isolation pas an holes provie for anchoring to supporting structure. Housing shall be hot ip galvanize for corrosion resistance. Housing shoul be esigne to provie a constant free an operating height within 1/8" (0.06 ). elements shall have a lateral stiffness greater than 1.0 times the rate vertical stiffness an shall be esigne to provie a minimum of 50% overloa capacity. s shall be selecte to provie static eflections shown on the Vibration Isolation Scheule or as inicate on the project ocuments. s shall be color coe or otherwise ientifie to inicate loa capacity. Vibration isolators shall be Moel FS, as manufacture by Kinetics Noise Control, Inc.

2 Isolator Type FS-1-35 FS-1-70 FS FS FS FS FS FS FS FS-1-50 FS-1- FS-1-0 FS-1-0 FS-1-6 FS FS-1-0 FS-1-10 FS-1-00 FS FS FS FS FS-1-00 FS FS-1-00 FS FS FS FS FS FS FS FS FS Color /ht Chrm/ht Black Re Org/ / /Brn Org/ / /Brn Org/ / /Brn lbs kg Rate Capacity Rate eflection O H FS /15000 FS-1-35/805 FS-1-50/3500 FS-2-/1975 FS /00

3 Isolator Type FS-2- FS FS FS-2-2 FS-2-0 FS FS FS-2-6 FS FS FS FS-2-20 FS-2-00 FS FS FS FS-2-00 FS-2-50 FS-2-30 FS-2-30 FS FS FS-2-4 FS-2-00 FS FS FS FS FS FS FS FS FS FS FS-2-00 FS FS-2- FS FS FS FS FS Color Grey/Brn /Brn Grn/Brn Black Black/Brn Org/Brn Org/Grn Re Re/Grn / /Grn /Blk Blu/Org Blu/Org/Grn /Re Blu/Re/Grn / /Grn /Blk Blu/Org Blu/Org/Grn /Re /Re/Grn / /Grn /Blk /Org Blu/Org/Grn /Re Blu/Re/Grn lbs kg Rate Capacity Rate eflection O H FS /18000 FS-1-00/7000 FS /9000

4 kineticsnoise.com MAE IN USA Kinetics Noise Control, Inc. is continually upgraing the quality of our proucts. e reserve the right to make changes to this an all proucts without notice. FS /

5 KINETICS Restraine Isolators Moel FS-4 escription Kinetics Moel FS Vibration Isolators consist of freestaning large iameter laterally stabile steel springs assemble into wele steel housing assemblies fabricate to limit vertical movement of the isolate equipment if equipment loas are reuce, or if the equipment is subjecte to large external forces. The housings also provie a constant free an operating height to facilitate installation. elements are complete with internal noise isolation pas an have an ajusting an leveling bolt as a part of the top loa plate assembly. s are polyester power coate, with a 0 hour salt spray rating per ASTM B-1. Holes are provie in all isolators for bolting to the structure an to the supporte equipment. The isolator can be wele to the structure as well. To assure stability, the springs have a lateral spring stiffness greater than 1.2 times the rate vertical stiffness, an are esigne to provie a minimum of 50% overloa capacity. FS springs are available with eflections to 4 ( ) an with loa capacities t o 2 3, l b s. ( 1 0, k g ) a s s t a n a r p r o u c t s. Custom isolators with higher eflections an greater loa capabilities are also available. Application Kinetics Moel FS vertically restraine spring isolation mounts are recoene as a noise an vibration isolator for mechanical equipment locate near critically quiet areas, when the equipment to be isolate has significant changes of weight uring maintenance operations, an for equipment subjecte to external forces or high win loas. Moel FS mounts are typically use to reuce the transmission of noise an vibration into supporting structures from equipment carrying a large flui loa that may be raine, such as boilers, cooling tower an chillers, an cooling towers which also require hol-own for win loas. Operating static eflections are available up to 4 ( ) to compensate for long span flexible floor structures an maintain a high egree of noise an vibration isolation. Specification Vibration isolators for equipment which is subject to loa variations an large external or torquing forces shall consist of large iameter laterally stabile steel springs assemble into wele steel housing assemblies esigne to limit vertical movement of the supporte equipment. Housing assemblies shall be fabricate steel members an shall consist of a top loa plate complete with ajusting an leveling bolts, vertical restraints, isolation washers an a bottom plate with internal non-ski noise isolation pas. Housing shall be electrozinc plate or hot ip galvanize for corrosion resistance. Housing shoul be esigne to provie a constant free an operating height within 1/8 (0.06 ). elements shall have a lateral stiffness greater than 1.2 times the rate vertical stiffness an shall be esigne to provie a minimum of 50% overloa capacity. Non-wele spring elements shall be polyester power coate, an shall have a 0 hr rating when teste in accorance with ASTM B-1. s shall be selecte to provie static eflections shown on the Vibration Isolation Scheule or as inicate on the project ocuments. s shall be color coe or otherwise ientifie to inicate loa capacity. Vibration isolators shall be Moel FS, as manufacture by Kinetics Noise Control, Inc.

6 Isolator Type FS-4- FS-4-0 FS FS FS-4-0 FS-4-10 FS FS-4-20 FS-4-00 FS-4-50 FS FS-4-30 FS FS FS FS-4-0 FS FS FS-4-00 FS-4-50 FS FS FS FS FS FS FS FS-4-00 FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS Color Black Re / /Grn /Blk /Re /Brn /Org Chr/ Chr/Grn Chr/Blk Chr/Re Chr/Brn Chr/Org /Grn /Blk /Re /Brn /Org Chr/ Chr/ Chr/Black Chr/Re Chr/ Chr/Org /Grn /Blk /Re /Brn /Org Chr/Blu Chr/Grn Chr/Blk Chr/Re Chr/Brn Chr/Org lbs kg Rate Capacity Rate eflection O H HEIGHT H - REMOVABE BOCKING VERTICA RESTRAINT BOT NOISE PA VERTICA H - HEIGHT BOCKING RESTRAINT BOT REMOVABE NOISE PA VERTICA H - HEIGHT BOCKING RESTRAINT BOT REMOVABE NOISE PA HEIGHT H - NOISE PA REMOVABE BOCKING VERTICA RESTRAINT BOT FS-4-/1600 FS /600 FS-4-000/23200 FS-4-20/5800 FS 4 06/15 Kinetics Noise Control, Inc. is continually upgraing the quality of our proucts. e reserve the right to make changes to this an all proucts without notice. MAE IN USA kineticsnoise.com sales@kineticsnoise.com