Z5017 TV spigot HD Mounting instructions (4.0EN)

Transcription

1 Z5017 TV spigot HD Mounting instructions (4.0EN)

2 Contents 1. Product description/application Load safety information Scope of supply Assembly Function of the securing pin (Rue ring cotter) Assembly with Z5090 Single bar Maintenance and care Cleaning Regular inspections Disposal/Environmental protection EC Declaration of Conformity...5 General information Z5017 TV spigot HD Mounting instructions Version 4.0EN, 09/2006, D2921.EN.04 Copyright 2006 d&b audiotechnik AG; alll rights reserved. Keep this manual with the product or in a safe place so that it is available for future reference. d&b audiotechnik AG Eugen-Adolff-Strasse 134, D Backnang Telefon: , Fax: docadmin@dbaudio.com, Internet:

3 Z5017 TV spigot HD 1. Product description/application The Z5017 TV spigot HD (according to the German standard DIN ) can be used to vertically suspend d&b loudspeaker cabinets from a single suspension point in conjunction with: Z5090 Single bar C4/C7/MAX/F2/B1 Arrays of MAX loudspeaker cabinets using the Z5043 MAX Horizontal bracket together with the Z5044 MAX Bracket connector. Arrays of Ci-Series cabinets in conjunction with the Z5054 Flying adapter Ci60/Ci Load safety information The maximum permitted load of the TV spigot HD is 170 kg/375 lb according to the German standard BGV C1. When used with the Z5090 Single bar, the maximum load is 162 kg/370 lb. TV spigot assemblies must only ever be used with the spigot pointing vertically downwards so that the force of the load also acts downwards. Fig. 1: Z5017 TV spigot HD 3. Scope of supply The Z5017 TV spigot HD is supplied with a fixing bolt and Rue ring cotter (securing pin) together with this mounting instructions. 4. Assembly Installation and set up should only be carried out by qualified and trained personnel. It is the responsibility of the person installing the assembly to ensure that the suspension/fixing points are suitable for the intended use. All system components must be inspected for faults before use. Please pay attention to section 5. Maintenance and care on page 4. Damaged components must be withdrawn from use immediately Function of the securing pin (Rue ring cotter) Release Remove/ Fit Snap in Lock Fig. 2: Function of the Rue ring cotter (schematic diagram) Z5017 Mounting instructions (4.0EN) Page 3 of 6

4 [1] [1a] [1b] 4.2. Assembly with Z5090 Single bar 1. Unlock and remove the ring cotter [1a] of the fixing bolt and remove the fixing bolt [1b]. 2. Attach the TV spigot to the Single Bar or to the respective hole of the flying adapter. 3. Insert the fixing bolt [1b] and secure the bolt with the ring cotter [1a]. 4. Recheck your work and ensure the ring cotter is properly fitted to the fixing bolt (Fig. 3). Fig. 3: Z5017 Assemby with Z5090 Single bar Safety precaution! It is essential to bypass the TV spigot using a safety wire (secondary safety). If the Ring cotter either breaks or is bent out of shape, the fixing bolt may slide out of the spigot and release the suspended load. [1] 5. Maintenance and care 5.1. Cleaning Regularly clean and lubricate the TV spigot with WD-40 or a similar product. [1a] Fig. 4: Z5017 Maintenance and care [1b] 5.2. Regular inspections Test recommendations Visual inspection of the TV spigot [1] for obvious damage (e.g. deformation, cracks or corrosion). Visual inspection of the fixing bolt [1b] for obvious damage (e.g. deformation, notching, cracks or corrosion). Visual inspection of the Rue ring cotter [1a] for obvious damage and deformation. Also carry out a functional test of the locking mechanism. If the ring cotter can no more be properly fitted to the fixing bolt and locked it must be exchanged - (Fig. 5). Ring cotter o.k. Change the ring cotter Fig. 5: Condition of the Rue ring cotter [1a] 6. Disposal/Environmental protection The device must be disposed in accordance to the national environmental regulations. Z5017 Mounting instructions (4.0EN) Page 4 of 6

5 EC Declaration of conformity 7. EC Declaration of Conformity within the meaning of the EC Machine Directive 98/37/EEC We hereby declare that the equipment designated below is designed and built in the version sold by us in such a way as to comply with the relevant fundamental safety and health criteria of the applicable EC Directive(s). This declaration shall cease to be valid if alterations are made to the equipment without our prior agreement. This declarations covers: d&b Z5017 TV spigot HD To be used as described in this mounting instructions National standards and technical specifications applied, in particular: DIN , DIN , DIN EN 1050, DIN EN ISO 12100, BGV C1 Backnang, (Frank Bothe, Director) d&b audiotechnik AG, Eugen-Adolff-Str. 134, D Backnang, Germany, Phone , Fax

6 d&b audiotechnik AG, Eugen-Adolff-Str. 134, D Backnang, Germany, Phone , Fax D2921.EN.04, 09/2006 d&b audiotechnik AG