liniled Marker Lights Round: 3" and 5.5"; Square: 2.75" and 4.6"

Transcription

1 Available in four dimensions (Round: 3" and 5.5"; Square: 2.75" and 4.6") Your choice of three luminous intensities (Deco <1W/fixture, Power <1.3W/fixture and PSP <3W/fixture) Color temperatures: 2700K, 3000K, 4000K and 6500K Deco versions also available in RGB, Red, Green, Blue and Amber IP68 rated Drive over applications ~ 3,000 lbs. Life >50,000 hours (LM79) 3" (76 mm) Marker Light: 3" Round 5.5" (140 mm) Marker Light: 5.5" Round 2.75" (70 mm) Marker Light: 2.75" Square Construction Cast polyurethane resin within epoxy coated 316 stainless steel with IP68 conectors Mounting Surface mount LED SMD OSRAM Power TOPLED long life Degree of Protection Wet connector IP67, IP68 Weight lbs. Driver / Electrical Choice of Magnetic driver, Universal Voltage ( V), electronic driver or 347V electronic drivers in either Non-Dim or 0-10v / 10% Dimming. Connection Connections are rated IP68. Finish Marker Lights are 316 stainless steel with white powder coat. Housing is 316 stainless steel. 4.6" (118 mm) Marker Light: 4.6" Square

2 1 liniled Marker Light 2 liniled connector set 3 liniled extension cord 4 liniled splitter 5 Power supply 6 liniled dimmer/controller V

3 3" (76 mm) 5.5" (140 mm) 2.75" (70 mm) 4.6" (118 mm) Marker Light: 3" Round Marker Light: 5.5" Round Marker Light: 2.75" Square Marker Light: 4.6" Square liniled Marker Light Color Temp Deco Power PSP liniled Marker Light Color Temp Deco Power PSP Round small 2400K "w x 3"h 2700K K K K RGB Red Green Blue Amber Round large 2400K "w x 3"h 2700K K K K RGB Red Green Blue Amber Square small 2400K "w x 3"h 2700K K K K RGB Red Green Blue Amber Square large 2400K "w x 3"h 2700K K K K RGB Red Green Blue Amber liniled Housing, Connectors & Splitter Length Round small housing Round large housing Square small housing Square large housing Connector set, IP68 16' Connector set, IP68 33' RGB Connector set, IP68 16' RGB Connector set, IP68 33' Extension Cord, IP68 16' Extension Cord, IP68 33' RGB Extension Cord, IP68 16' RGB Extension Cord, IP68 33' Splitter for Mono and RGB IP68

4 Step 1: Scale: 6" = 1'-0" Step 3: Scale: N.T.S " In-ground Round Maker Housing In-ground Marker * Excavate soil for "In-ground Maker Housing" and conduit Run. See Detail A. * Housing to sit on Solid Foundation. * Place "In-ground Maker Housing Cover" on housing. Detail A: LiniLED Round Marker *Remove cover. *Install Maker Marker Isometric View: 7/8"Ø Knock-Out for 1/2" N.P.T. Conduit Solid Foundation Step 2: Scale: 6" = 1'-0" Power from Conduit Knock-out or Bottom of Housing Drainage & or Conduit opening Step 4: Scale: 6" = 1'-0" Grout (All-Around) Top Ground (Concrete) In-ground Maker Detail B: Paver Housing 1/6" LiniLED Round Square Marker 1/16"± *Grout (all-around) as shown. Solid Foundation PROPRIETARY & CONFIDENTIAL *Surround "Housing" by Top Ground. *Level Top Ground appropriately. Note: Marker to project from Housing approximately 1 16". See Detail B. *Cover to prevent any debris from entering housing. DRAWN BY: CHECKED ENG REVISION. MATERIAL: FINISH: ORDER # NAME UNLESS OTHERWISE SPECIFIED: DATE EO 03/04/15 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ± 1/16 ANGULAR: MACH ±0.5 BEND ± 0.03 TWO PLACE DECIMAL ±.030 THREE PLACE DECIMAL ±.015 SPECIFICATIONS are subject to change in accordance w/ improvements & technical innovation. THE INFORMATION contained in this drawing is the SOLE PROPERTY of ORGANIC LIGHTING SYSTEMS any reproduction in part or as a whole without the written permission of ORGANIC LIGHTING SYSTEMS is PROHIBITED. 511 N. Virginia Ave. Azusa, Ca USA Ph: Fax: Web: organiclighting.com TITLE: SIZEA Round Marker & Housing Installation DWG. NO. REV SCALE: Varies WEIGHT: SHEET 1 OF 1

5 Step 1: Scale: 6" = 1'-0" REVISION REV. DESCRIPTION DATE DRAWN BY Marker Step 3:Scale: 6" = 1'-0" 4.6" LiniLED Square Marker Marker " Maker Housing * Excavate soil for " Maker Housing" and conduit Runs. *Place " Maker " on housing. *Remove cover. *Install Maker Step 4:Scale: 6" = 1'-0" Soil Step 2:Scale: 6" = 1'-0" Grout (All-Around) *Grout (all-around) as shown. Top Ground (Concrete) Maker Detail A: 4.6" LiniLED Square Marker 1 6 " " Paver Housing 3/16"± Soil PROPRIETARY & CONFIDENTIAL *Surround "Housing" by Top Ground. *Level Top Ground appropriately. Note: Marker to project from Housing approximately 3 16". See Detail A. *Cover to prevent any debris from entering housing. DRAWN BY: CHECKED ENG REVISION. MATERIAL: FINISH: ORDER # NAME UNLESS OTHERWISE SPECIFIED: DATE EO 07/08/14 DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ± 1/16 ANGULAR: MACH ±0.5 BEND ± 0.03 TWO PLACE DECIMAL ±.030 THREE PLACE DECIMAL ±.015 SPECIFICATIONS are subject to change in accordance w/ improvements & technical innovation. THE INFORMATION contained in this drawing is the SOLE PROPERTY of ORGANIC LIGHTING SYSTEMS any reproduction in part or as a whole without the written permission of ORGANIC LIGHTING SYSTEMS is PROHIBITED. 511 N. Virginia Ave. Azusa, Ca USA Ph: Fax: Web: organiclighting.com TITLE: Square Marker & Housing Installation SIZEA DWG. NO. REV SCALE: Varies WEIGHT: SHEET 1 OF 1