SPECIFICATIONS Patio Covers and Pergola Awnings Section (10530) Fabric Retractable Engineered Structures Section
|
|
|
- Liliana Horn
- 6 years ago
- Views:
Transcription
1 SPECIFICATIONS Patio Covers and Pergola Awnings Section (10530) Fabric Retractable Engineered Structures Section Specifications for Pergola Awnings by SUNAIR : PART 1 - GENERAL P.O. Box Rt. 175, Jessup, MD JESSUP, MD PHOENIX, AZ SECTIONS INCLUDE / RELATED SECTIONS: A Exterior Sun Control Devices B Protective Covers C Framed Fabric Structures 1.2 SECTIONS INCLUDES A. Fabricated engineered Structure / aluminum frame B. Motors and Controls C. Fabric D. Accessories 1.3 RELATED SECTIONS A. Section cast In-Place Concrete: Concrete Pad, foundation and anchor bolts B. Section Glass: Glass and glazing requirements for glazed openings. C. Section Powder Coating. 1.4 DEFENITIONS A. Structure / Pergola width is measured from outside of guide to outside guide B. Structure Pergola Projection is measured from wall to outside of pillar / posts C. Structure Post Height under gutter measured from top of post under gutter to bottom of post bracket
2 1.5 DESIGN REQUIREMENTS A. Provide factory built prefabricated structures and shelters capable of withstanding the effects of loads and stresses within limits and under conditions indicated by local codes and manufacturer. 1.6 SCOPE / DESCRIPTION: A. Furnish and install a Pergola awning(s) (MODEL) as manufactured by Sunair Awnings & Solar screens, P.O Box 1068 Jessup, MD in accordance with the specifications below. 1.7 SUBMITTALS A. Product Data: Manufacturers data sheet shall be submitted for each product specified including, finishes, dimensions, options and installation instructions. B. Drawings and diagrams: Product details, installation details, working and assembly drawings shall be supplied as requested. B. Sample: Contractor or agent shall supply sample of materials as required. 1.8 QUALITY ASSURANCE A. Product shall be manufactured to meet or exceed the quality and standards of the Pergola awnings as per description above. B. Supplier shall be approved to supply the products specified and shall honor all claims and warranties as specified in accordance with manufacturers warranty. C. Provide structures from one manufacturer for the entire project if possible. 1.9 DELIVERY STORAGE AND HANDLING A. Product shall be delivered to site in manufacturer original packaging. B. All products should be stored and handled to prevent damage to materials, finishes, and operating mechanism WARRANTY A. Supplier shall honor manufacturers product warranty from date of installation (See specific warranty detail available from Sunair Awnings & Solar Screens).
3 PART 2 PRODUCTS 2.1 MANUFACTURERS A. Acceptable manufacturer: Sunair Awnings and Solar Screens (Awnings Unlimited Inc) P.O Box 1068, 7785 Rt. 175, Jessup, MD info@sunairawnings.com, B. Substitutions: Substitutions not permitted. Any substitutions must be submitted for approval 30 days prior to close of bid. C. Product descriptions and types. Pergola is a custom made retractable fabric structure in which the structure is made of a stationary aluminum framework with a folding or retractable fabric roof cover. The fabric is supported by paralleled intermediary support fabric bars located approximately every 22 along the structure. The fabric cover and support bars retract and extends along the aluminum fabric structure by means of a belt and carriage system. The control mechanism is a 110 volt Somfy tubular motor which is operated with a remote control. D. Pergola wall mounted models include the LEVEL, MITO, TECNIC, EVO, ALUTECNIC, STIL, and TECNIC ONE. E. Free standing model includes the NOMO, RIALTO, PHOENIX, and ZEN (Free standing models can be wall mounted as well). 2.2 STRUCTURAL & MATERIALS A. Product Description: Frame member s tubular aluminum Extrusion anodized or powder coated from manufacturers standard or custom available color range. B. Unit Size: Field measure each structure to fit. Dimensions: Overall width, overall projection, mounting height at wall, post height. C. Type of system, Type 1 with two (2) pillars / posts, Type 2 with three (3) pillars / posts, and Type 3 with four (4) pillars / posts. D. Hood system to fit specified projection E. Fabric: PVC Ferrari 602, Ferrari 502, Ferrari 6002 Stam, Opatex, Soltis 86, and Acrylic fabrics from manufacturers standard range of types and colors.\
4 F. On Type 1 systems with two (2) posts provide the patented click and Lock system allowing for easy and safe installation of the fabric and front bar to the aluminum structure / frame. G. The Pergola Drop catcher system shall be integrated on all support bars and carriages when the unit utilizes taut straight fabric with pitch to reduce water flowing over the sides of the fabric. With the Drop catcher system installed and proper pitch, the water flows into the integrated gutter system. H. The Pergola Safety box shall be integrated on all motorized units and installed on the running profiles. I. Motors and controls shall be manufactured by Somfy Inc. in Cranberry NJ, from their standard radio compatible 550 or 660 series (ALTUS RTS) range. 3 ACCESSORIES A. Roll up SC2000, SC3000, SC4000, SC4500 zipper screens, or SC2500 screens manufactured by Sunair either open roller or cassette type with zipper track or cabled with the magnetic lock device. Available fabric, either mesh or solid vinyl with windows as per manufacturers available range. B. LED Lights C. Heaters D. Glass panels / Retractable Glass Walls E. Alternate or to one side water drainage for flat non sloped structures F. Undercover / swag fabric made of acrylic fabric to simulate canvas look PART 3 EXECUTION 3.1 INSTALLATION A. Install structures in accordance with the manufacturers standard instructions. B. If motorized, set the limit switches and program all remotes. Coordinate with the electrician so that all motors are wired to local codes.
5 C. Coordinate installation with other divisions for proper installation of structure to decking, concrete slab or wall attachment. Anchor mounting supports to provide adequate support for intended use of structure, design loads, and local codes. D. Buildings are to be field measured by the awning contractor prior to Pergola awning being manufactured and installed. 3.2 DEMONSTRATION A. Demonstrate operational method and instruct owner s personnel in proper operation and maintenance of the awning system. END OF SECTION Revised 03/01/17 SUNAIR AWNINGS & SOLAR SCREENS P.O Box 1068 Jessup, MD Phone: Fax: Info@sunairawnings.com
SPECIFICATIONS Adjustable Louvered Roofs (10530) Patio Covers and Pergola Awnings Section
SPECIFICATIONS Adjustable Louvered Roofs (10530) Patio Covers and Pergola Awnings Section 107313 Specifications for Louvered Pergola Awnings by SUNAIR : PART 1 - GENERAL P.O. Box 1068 7785 Rt. 175, Jessup,
Series - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
SECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
Series - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 591 SERIES THERMACORE INSULATED STEEL DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click
SECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL PART 1.1 SECTION INCLUDES A. Overhead doors. B. Bi-fold doors. PART 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete: Prepared opening
SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
![SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)](/thumbs/77/75601156.jpg "SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)")
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
SECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
2000/2100/2200 Series Heavy Commercial Sliding Patio Doors
2000/2100/2200 Series Heavy Commercial Sliding Patio Doors MANKO WINDOW SYSTEMS, INC. 800 HAYES DRIVE MANHATTAN, KANSAS 66502 PHONE: (800) 642-1488 (785) 776-9643 FAX: (800) 576-2656 (785) 776-9644 MANKO
A. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
SECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)
SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
A. The extent of extruded aluminum walkway covers is shown on the Drawings and as specified herein.
SECTION 10530 - EXTRUDED ALUMINUM WALKWAY COVERS PART I - GENERAL.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division
1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
Section BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
EDGEWATER, FLORIDA JUNE 14, 2010
SECTION 12 2413 - ROLLER WINDOW SHADES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
TIE Aluminum Guide Spec: Thermally Improved Windows & Doors
TIE Aluminum Guide Spec: Thermally Improved Windows & Doors Thermally Improved Aluminum Windows (TIE) ALUMINUM WINDOWS - 08 51 13 With the thin lines that Milgard s TIE Aluminum Windows provide, they
SECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
A. Pre-engineered, pre-finished extruded aluminum Pavilions.
10 73 00 SECTION Pavilions PART 1 GENERAL 1.1 SECTION INCLUDES A. Pre-engineered, pre-finished extruded aluminum Pavilions. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and Accessories. B. Section
OUTSIDE DREAMING
OUTSIDE DREAMING A2 C L1 A1 T1 Creating a new style of space and a new concept of outdoor living, the GENNIUS is a complete modular system that provides not only protection from the sun, but from rain
SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
Section SECTIONAL INSULATED STEEL DOORS
1 GENERAL 1.1 GENERAL REQUIREMENTS General Conditions and Division 01 apply to this section. 1.2 RELATED WORK Section 05500: Miscellaneous Metal Fabrication Section 07900: Joint Sealers Section 09900:
American Legion Park City Pool Glasgow Ky. REPAIR SPECIFICATIONS SECTION I
American Legion Park City Pool Glasgow Ky. REPAIR SPECIFICATIONS SECTION I A. DESCRIPTION OF WORK INCLUDED PIPING UPDATE INCLUDED ITEMS: Shop fabricate custom perimeter cover plates. Shop fabricate inlet
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION Section 08520 Aluminum Windows PART 1: WORK INCLUDED A. The conditions of the contract and applicable sections of Division
RAINIER SHADE RETRACTABLE SCREENS
80% No No Cool Naturally 50% Interior Inside RAINIERSHADE 15% R E T R AC TA B L E S C R E E N S Exterior Outside Cool your home naturally with a Rainier to effectively reduce heat gain and decrease your
SUGGESTED SPECIFICATION SECTION ENTRANCE FLOOR MATS AND FRAMES
Note: After downloading this spec, the Specifier must choose the correct Finish, Insert and Frame options and delete all other options to produce an accurate specification. GRIDLINE (G6) SUGGESTED SPECIFICATION
SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
Page 1 PRODUCT DESCRIPTION SECTION SECTIONAL OVERHEAD DOORS MODEL 900 PRODUCT FEATURES
2016-03-24 Page 1 SECTION 08360 SECTIONAL OVERHEAD DOORS DESCRIPTION MODEL 900 PRODUCT FEATURES Sectional steel overhead doors, industrial grade heavy duty construction. BASIC USES / RELATED USES Sectional
SECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
SECTION Summit Phenolic Lockers (Solid Phenolic Lockers)
SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with
329 Boston Post Road Sudbury, Massachusetts TEL: FAX:
SECTION 12520 MECHOSHADES AND ELECTROSHADES PART 1 GENERAL 1.1 SUMMARY A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
Copyright 2014 Lu-Tek Inc.
NOTE: This document contains hidden Editor's Notes that provide guidance for editing. To view these notes, make sure your text editing software is set to view hidden text while editing and to hide this
SST-II HYDRAULIC BI-FOLD SPECIFICATIONS
PART 1 GENERAL 1.01 DESCRIPTION A. General 1. Furnish SST-II Hydraulic Bi-Fold System complete from one manufacturer. Provide all labor, materials, tools and equipment to furnish the SST-II Bi-Fold System
A. Submit the following in addition to the standard requirements.
SECTION [13120] OMNIFLEX 300 MODULAR WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete modular wall system including,
SECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
SUGGESTED SPECIFICATION SECTION ENTRANCE FLOOR MATS AND FRAMES
Note: After downloading this spec, the Specifier must choose the correct Finish, Insert and Frame options and delete all other options to produce an accurate specification. PEDITRED (G4) Part 1 General
SECTION SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM
SECTION 13 1100 SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as
STERLING. Construction & Development Corporation MODULAR BUILD. Cost Competitive System
- Introduction a. What is Modular Build? b. Basic Components c Standard Dimensions d. Uses Cost Competitive System Easy Transportable Modular Build is a Pre-Fabricated highly Insulated Building System
SECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
800 Series Aluminum Overhead Doors, by Northwest Door Section ALUMINUM SECTIONAL DOORS Digicon Information Inc.
Digicon Information Inc. Page 1 This section includes Model 800 aluminum insulated overhead sectional doors manufactured by Northwest Doors, with manual, chain or electric operation, with our without windows.
SIERRA MODEL 12 X 24 SPECIFICATIONS
SIERRA MODEL 12 X 24 SPECIFICATIONS Dimensions: Roof Dimensions 12-0 x 24-0 Column Dimensions (center to center) 9-0 x 21-0 Minimum Clearance 8-0 Shed Roof 1:12 pitch Square Feet Under Roof 288 Columns
SOMFY SPECIFICATION March 2012 SECTION... ROLLER WINDOW SHADES SOMFY LS 40 MOTOR RANGE. Disclaimer for advice given to architects and engineers
V1 SECTION......... ROLLER WINDOW SHADES SOMFY LS 40 MOTOR RANGE * NOTE TO SPECIFIER * [LS40 is a range of motors, only take the appropriate reference within this range for your project specification.]
Product information Flat roof smoke ventilation window CSP
Edition 1.0 01.10.2014 Product information Flat roof smoke ventilation window CSP Product description Mains powered smoke ventilation window for flat roofs CE-marked in accordance with EN 12101-2:2003
FoldingAccess Series Aluminum Folding Door System
HORTON AUTOMATICS - ARCHITECTURAL SPECIFICATIONS, 1/2008 FoldingAccess Series 4-4200 Aluminum Folding Door System DIVISION 08 - OPENINGS SECTION 08 42 29.13 FOLDING AUTOMATIC ENTRANCES Specifier Note:
B. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
SECTION CRC575 UNITARY CLEANROOM WALL SYSTEM STUDLESS CLEANROOMWALL SYSTEM ME175 3-IN-1 CLEANROOM WALL SYSTEM
SECTION 13200 CRC575 UNITARY CLEANROOM WALL SYSTEM 175-300 STUDLESS CLEANROOMWALL SYSTEM ME175 3-IN-1 CLEANROOM WALL SYSTEM PART 1 GENERAL 1.01 WORK INCLUDED A. This Section provides the requirements necessary
SECTION IMPACT RESISTANT WALL PROTECTION
SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,
A. This Section includes automatic entrance door systems operating as follows: 1. Swinging operation.
SECTION 08462 - SWINGING AUTOMATIC ENTRANCE DOORS PART 1 - GENERAL.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division
SPECIFYING AN O KEEFFE S LADDER
SPECIFYING AN O KEEFFE S LADDER When including an O Keeffe s Aluminum Ladder in your specification, use the following steps to choose the right ladder for your project. Step 1 Select Your Model 531 532
GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
Product information Fixed flat roof window CFP
Edition 1.0 01.10.2014 Product information Fixed flat roof window Product description Fixed (not opening) window for flat roofs Wear-resistant, high quality white PVC frame Low energy insulating glass
DIVISION OF PITTCON CUSTOM CORPORATION. Series Plastic Laminate or Veneer clad Column Covers CC-7
DIVISION OF PITTCON CUSTOM CORPORATION Series 8500 Plastic Laminate or Veneer clad s CC-7 Series 8500-Details Quarter Round (Wall Mount) Half Round (Wall Mount) Three-Quarter & Partial Column Covers Post
SECTION DECORATIVE METAL AND GLASS RAILING
SECTION 05 73 00 DECORATIVE METAL AND GLASS RAILING PART 1 GENERAL 1.1 SUMMARY A) This section includes both standard and custom handrails as shown in the contract drawings. B) These include aluminum,
Corium Brick Rainscreen System Specifications
CORIUM BRICK RAINSCREEN SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Work Included: The Work of this Section shall include but not be limited to the following: 1. Corium brick plates 2. Galvanized and coated
/CHI BUYLINE Rolling Steel. Buyer s Guide THE DOOR TO QUALITY.
C O M M E R C I A L R O L L I N G S T E E L D O O R S 08 33 00/CHI BUYLINE 4676 Rolling Steel Buyer s Guide THE DOOR TO QUALITY. CONTENTS for Commercial Rolling Steel Doors 4... 6000 NON-INSULATED SERVICE
CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT. Submittal Requirements
CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT 1 East Franklin Street Phone: 301-790-4163 Third Floor Hagerstown, MD 21740 Fax: 301-791-2650 BUILDING PERMIT APPLICATION FOR RESIDENTIAL ACCESSORY
SECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System
SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF WELDED SYSTEM PART 1 GENERAL 1.1 SECTION
SOLAR SHADING SYSTEMS - Manual Solar Shade SECTION ROLLER WINDOW SHADES
PART 1 - GENERAL SECTION 122413 - ROLLER WINDOW SHADES 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
Aluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
SECTION TURBINE VENTILATORS
SECTION 07 72 00 TURBINE VENTILATORS **This is a CSI Three-Part Specification using CSI MasterFormat 2004-2010 Section Numbers and Titles. This specification must be edited to suit your particular project.
SPECIFICATION SECTION 05515: LADDERS O Keeffe s Aluminum Ladders
Welcome to the O Keeffe s Guide Specification System prepared as an aid to specify in preparing written construction documents. For specification assistance with specific product applications, please contact
Guideline Specifications
Page 1 of 7 PART 1 Guideline Specifications Exterior Aluminum/Composite Wall Panels GENERAL ARROWHEAD 508 SYSTEM Pressure Equalized Rainscreen SECTION 07410 1.01 SUMMARY A. Work of this section included
Edouard AVANT GROVE U I C U I C. Modern Living Made Easy uichomes.com
Edouard Modern Living Made Easy uichomes.com - new construction - 3 stories + full basement - 4 bedrooms - 2.5 baths - 2,380 s.f. call 314.881.2333 or e-mail sales@uicstl.com PLAN NTS DECK 13' 0" X 12'-0"
DBI-SALA Uni 8 Overhead Horizontal Lifeline Cable System SECTION HORIZONTAL FALL PROTECTION - OVERHEAD CABLE
SECTION 112429.18 - HORIZONTAL FALL PROTECTION - OVERHEAD CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide overhead horizontal cable fall protection system, including end anchors, energy absorbers,
S h e l v i n g CANTILEVER S H E L V I N G S Y S T E M S S t o r a g e S o l v e d
Shelving CANTILEVER S H E L V I N G S Y S T E M S S t o r a g e S o l v e d DESIGN FEATURES Due to their rugged strength and pleasing aesthetic design, Spacesaver Cantilever Shelving and Library Media
Blocco. Above: Blocco Roller Blind Left: Blocco Honeycomb Blind. Sec. : Blocco Date : Aug 2017 ISSUE: BL
Blocco Above: Blocco Roller Blind Left: Blocco Honeycomb Blind SPECIFICATIONS ISSUE: BL-01-001 SPECIFICATIONS. ISSUE: BL-01-001 Blocco Roller System - Overview Blocco Roller System Product Overview Brand
ST. JOHNS COUNTY ARCH. PROJ. NO SECTION PREFABRICATED ALUMINUM CANOPIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 10530 PREFABRICATED ALUMINUM CANOPIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
A. Manufacturer: A firm that produces primary glass or fabricated glass as defined in referenced glazing publications.
SECTION 08800 - GLAZING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
This guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
The Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage
The Ashland Project Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage The garage and bedroom extend from the front of this three bedroom home, drawing you visually into the entryway. Brick and stucco
1. Decks, balconies, and sun porches 2. Walkways, ramps, and stairways 3. Patios and courtyards
SECTION 07185 TRAFFIC MEMBRANE PART 1 GENERAL 1.1 SECTION INCLUDES A. Traffic membrane, consisting of welded seam PVC waterproofing, over f following surfaces: 1. Decks, balconies, and sun porches 2. Walkways,
Signature Series 5 Lap SECTION ALUMINUM WINDOWS
Signature Series 5 Lap SECTION 08 51 13 ALUMINUM WINDOWS PART 1 GENERAL 1.01 SUMMARY A. Related Documents: Conditions of the Contract, Division 1 - General Requirements, and Drawings apply to Work of this
G. UNDERWRITERS LABORATORY, INC.: 1. UL 325: Electrical Door, Drapery, Gate, Louver, and Window Operators and Systems
B6.0 DIVISION 8 - DOORS AND WINDOWS SECTION 08460 - AUTOMATIC ENTRANCE DOORS Specifier Note: Coordinate and edit articles and paragraphs below to suit project requirements. Add section numbers and titles
TRANSPORT II " 10.5" MOUNTING POSTS FENCE LINE POST. Classic gate shown GATE OPENING CANTILEVER GATE SAFETY WARNING
TRANSPORT ESTATE TRANSPORT IS TRANSPORT LINK ADAPTRACK 2"sq x.25" UPRIGHTS & DIAGONAL BRACES 1"sq x.125" PICKETS GATE TRACKS PRE-DRILLED FOR LEFT OR RIGHT OPENINGS FENCE LINE POST 13.8125" 10.5" MOUNTING
PRODUCT SPECIFICATION SERIES 9000 WINDOW WALL THERMALLY BROKEN ALUMINUM CASEMENT / AWNING / FIXED WINDOW
08 46 3 GLAZED ALUMINUM WINDOW WALL PART - GENERAL A high-quality thermally broken 4 ½ aluminum window wall designed for residential high rise construction.. SUMMARY A. Section Includes: Glazed Aluminum
CITY OF RICHMOND PINE CAMP COMMUNITY CENTER ROOF REPLACEMENT PROJECT RCS PROJECT NO
SECTION 01010 - SCOPE OF WORK PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. General provisions of Contract, General Conditions and Technical Specification Sections, apply to this Section. 1.02 PROJECT DESCRIPTION
A. Section includes extruded aluminum windows with operating sash, operating hardware, and insect screens.
SECTION 08 51 13 - Page 1 PART 1 GENERAL 1.1 SUMMARY A. Section includes extruded aluminum windows with operating sash, operating hardware, and insect screens. B. Related Sections: 1. Section 07 92 00
GLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA2 Ultra Acoustical, STC 45/46 Paired, Glass Wall PRODUCT OVERVIEW: Top Supported Center Stack Paired s Manually Operated Maximum Opening Height: 12' 2 [3.7m] Maximum
PH6000. Key Features
Phenolic Locker Series PH6000 Key Features ½ inch doors and end panels Durable, backed by a 20 year warranty. Ideal choice for wet-use areas including pools and recreation centers Graffiti resistant, permanent
A. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Contents Company 5-9 Pergola Star Pergola Magna Pergola Mega Pergola Arch Pergola Top Star Pergola Persa Star
PRODUCT SERIES 2014 Contents Company 5-9 Pergola Star 10-15 Pergola Magna 16-21 Pergola Mega 23-27 Pergola Arch 28-33 Pergola Top Star 34-39 Pergola Persa 40-45 Star Vertical Casket 46-49 Star Casket 50-53
763.389.9475 www.erdmanautomation.com The Erdman 3M VHB Structural Glazing Tape Applicator, Frame Assembly & Glass Lay-in System Erdman 3M VHB Structural Glazing Tape Applicator, Frame Assembly and Glass
PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Kontor. Shade Sails & Tension Membrane Structures STREETSCAPE - PARK & STREET FURNITURE BINS PLANTER BOXES BIKE RACKS FOUNTAINS
Shade Sails & Tension Membrane Structures Kontor Shelter - About Us Kontor oversees the design, manufacturer and arrange the installation of high quality specialised outdoor shade products. Our range includes
MODEL: SIGHT-LINE- COMMAND CENTER CONSOLES
2015 WINSTED CORPORATION 1) GENERAL DESCRIPTION 1.1 Sight-Line Command Center Consoles. SeeAppendix A - C for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting
Architectural Specifications, Section Phenolic Lockers
Architectural Specifications, Section 10500 Phenolic Lockers Hollman, Inc., 1825 W. Walnut Hill Lane, Irving, TX 75038, (972) 815-4000, www.hollman.com 1.0 GENERAL 1.1 SECTION INCLUDES A. Phenolic Lockers.
AEROFOILS 200AF-450AF. Sun Control Systems
AEROFOILS 200AF-450AF www.luxalon.com Sun Control Systems Luxalon Aerofoils 200AF - 450AF System Description Luxalon wing-shaped panel elements, or fins, combine optimum solar effectiveness with a firm
GLASS WALL SPECIFICATIONS
GLASS WALL SPECIFICATIONS Series GA1 Ultra Acoustical, STC 45/46, Omni, Glass Wall PRODUCT OVERVIEW: Top Supported Side Stack Individual, Omni-Directional s Manually Operated Maximum Opening Height: 12'
HURON PUBLIC WORKS BUILDING HURON, SOUTH DAKOTA BID NO R
HURON PUBLIC WORKS BUILDING HURON, SOUTH DAKOTA BID NO. 2017-26R Stone Group Architects Project No. 1731 ADDENDUM DATE: September 14, 2017 BID DATE: September 18, 2017 2:00 P.M. C.S.T. SCOPE OF THIS ADDENDUM:
ALL-ALUMINUM DOOR & WINDOW FRAMING
ALL-ALUMINUM DOOR & WINDOW FRAMING WITH INTEGRATED ALUMINUM DOOR STOP SECTION 08 41 13 ALUMINUM FRAMED ENTRANCES AND STOREFRONTS SPECIFICATION PART 1 GENERAL 1.1 SECTION INCLUDES: A. Prefinished aluminum
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 12 2113 - LOUVER BLINDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Storefront systems and aluminum framed glass doors. 2. Hardware, fasteners, accessories, filler pieces, etc., required
OPERABLE PARTITIONS. Signature
OPERABLE PARTITIONS Signature 8000 SIGNATURE 2 WHO WE ARE Moderco is an international manufacturer of Manual & Electric Operable Partitions, Accordion Doors, Glass Wall Systems, and Gymnasium Dividers.
SECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
HD-Slide Series 2001 Heavy Duty Aluminum Sliding Door System with Electric Belt Drive Operator
HORTON AUTOMATICS - ARCHITECTURAL SPECIFICATIONS, 1/2008 HD-Slide Series 2001 Heavy Duty Aluminum Sliding Door System with Electric Belt Drive Operator DIVISION 08 - OPENINGS SECTION 08 42 29.23 SLIDING
Therma Series Insulated Overhead Doors, by Northwest Door Section SECTIONAL DOORS Digicon Information Inc.
Digicon Information Inc. Page 1 This section includes Model 650, 308, 308TM steel insulated overhead sectional doors manufactured by Northwest Doors, with manual, chain or electric operation, with our