STRUCTURAL STEEL FABRICATORS ACCREDITATION

Transcription

1 STRUCTURAL STEEL FABRICATORS ACCREDITATION SINGAPORE STRUCTURAL STEEL SOCIETY 1 Liang Seah Street #02-12 Liang Seah Place Singapore Tel: Fax: FORM SF 001 APPLICATION FORM (1 January 2011 Edition) INSTRUCTIONS Please refer the SINGAPORE STRUCTURAL STEEL SOCIETY Accreditation Requirements at Appendix 1 to check your eligibility. Fill in all the necessary details. Indicate 'NA' against items that are not applicable. This application must be submitted with the necessary supporting documents. Payment to be made by crossed cheque to SINGAPORE STRUCTURAL STEEL SOCIETY. DECLARATION I (Name in Block letters) (NRIC/Passport No.) do solemnly and sincerely declare that the facts contained in the documents submitted are true in substance to the best of my knowledge, information and belief and I make this solemn declaration conscientiously believing the same to be true. I authorize the SINGAPORE STRUCTURAL STEEL SOCIETY to conduct any enquiries or audit on the particulars furnished herein as the SINGAPORE STRUCTURAL STEEL SOCIETY deems fit, and accept that neither the SINGAPORE STRUCTURAL STEEL SOCIETY nor its officer shall be held liable for any loss, injury or damages howsoever caused by the SINGAPORE STRUCTURAL STEEL SOCIETY s processing of and decision on this application. I authorize (Name of Contact Person) to provide any additional information required by the SINGAPORE STRUCTURAL STEEL SOCIETY. I understand that false declaration or false information provided may result in rejection in approving the registration. Signature and Stamp of Company Designation Date FORM SF001-1 January 2011 Page 1 of 14

2 SECTION B: COMPANY INFORMATION Name of Registered Company: Office Tel: Fax: Business Address: Postal Code: Building / Block No: Street Name: If foreign firm - Country of origin Unit No: Building Name: Registry of Companies and Businesses (RCB): RCB Registration Number: RCB Registration Date: Tick 3 type of registration Sole Proprietorship Partnership Private Limited Public Listed Foreign Branch Name and contact of person(s), company or corporation which owns, whether directly or indirectly, at least 50% of the total number of shares in your firm: Percentage of shares held by such person(s), company or corporation: Name of Subsidiary/Associated Company 1) Applicants' Share in the Company (%) 2) 3) 4) 5) 6) 7) 8) FORM SF001-1 January 2011 Page 2 of 14

3 SECTION C: COMPANY MANAGEMENT SYSTEM Which management system/s is your company presently certified to? (Tick 3 type of registration) From which Certification body and the scope of certification (i.e BCA ISO certification scheme. Scope of certification: Structural Steel Construction Fabrication and Installation) For official use only ISO ISO OHSAS FORM SF001-1 January 2011 Page 3 of 14

4 ANNEX A FULL-TIME QUALIFIED PERSONNEL Please refer to the criteria on personnel requirement set out in the SINGAPORE STRUCTURAL SOCIETY Registration Requirements. You are required to attach copies of the relevant educational certificates and licences of the personnel listed here verification. For Singaporeans and PR, please enclose copy of *CPF statement and put the prefix S before the NRIC No. No Name NRIC / Passport No *CPF ($) Qualification Eg Anthony Tan Ah Teck S X $1,000 Degree Professional (Degree, Diploma, Discipline Civil Engineering NUS Institution For Official Use FORM SF001-1 January 2011 Page 4 of 14

5 ANNEX A No Name NRIC / Passport No *CPF ($) Qualification Eg Faudzi bin Ali S X $1,000 Diploma Supervisory (Degree, Diploma, Discipline Civil Engineering Institution Singapore Polytechnics For Official Use FORM SF001-1 January 2011 Page 5 of 14

6 ANNEX A No Name NRIC / Passport No *CPF ($) Qualification (Degree, Diploma, Discipline Eg Samy S X $1,000 SEC Certificate Welder/3 G Setsco Welders Institution For Official Use FORM SF001-1 January 2011 Page 6 of 14

7 No Name NRIC / Passport No *CPF ($) Qualification (Degree, Diploma, Discipline Eg Chan Chin Chye S X $1,000 SEC Certificate Steel Fitter CITI Steel Fitters Institution ANNEX A For Official Use FORM SF001-1 January 2011 Page 7 of 14

8 PART 1: PAST TRACK RECORDS Annex B Please provide works undertaken by your firm for the past 3 years. You may photocopy this form (Annex B). Please use one form for one project/contract. Project Title / Supply Description: Contract No: Short Description of Project or Item Supplied: Building Plan No: Contract type 1)Main Contract 2)Nominated Contract 3)1 st Sub Contract Tick "3" application type 1) 2) 3) Date of Commencement (dd/mm/yy): Scheduled Date of Completion / Delivery (dd/mm/yy): Actual Date of Completion / Delivery (dd/mm/yyyy): If in progress, state % completion: Value of Contract stated in Award Letter/Purchase Order (S$): Estimated tonnage of structural steel use in this project: For Official use only Main Contract / Nominated Sub-Contract: Particulars of Owner/Consultants for reference and verification Name of Owner/Developer: For Official use only Name of Officer: Contact Number: Address: Name & Address of Architect: Name of Officer: Contact Number: Address: Name & Address of Engineer: Name of Officer: Contact Number: Address: Sub-Contract: Particulars of Main Contractor for reference and verification Name of Main Contractor: For Official use only Name of Officer: Contact Number: Address: FORM SF001-1 January 2011 Page 8 of 14

9 Annex B PART 2: Facilities & Equipment In this part the applicant is required to provide information on its steel fabrication yard and equipment. The applicant should Facilities Address of the fabrication yard (if differ from the registered business address in Section B) Total area of the fabrication yard in square feet (covered and uncovered) For Official use only Area of permanent covered area with hoisting facilities in square feet For Official use only Equipment (Provide information on the type and how many number of the following equipment) Type of cutting machines & equipment Number For Official use only Type of drilling machines & equipment Number For Official use only Type of punching machines & equipment Number For Official use only Type of welding machines & equipment Number For Official use only Type of others machines & equipment Number For Official use only FORM SF001-1 January 2011 Page 9 of 14

10 STRUCTURAL STEEL FABRICATORS ACCREDITATION CRITERIA Description Category S1 Firm that has the infrastructure, resources and capabilities to fabricate and erect structural steel structures of 1.Building, industrial plant or portal structures of over 30 m in height 2.Large span portal, bridges or trusswork of over 30 m Category S2 Firm that has the infrastructure, resources and capabilities to fabricate and erect structural steel structures of 1.Building, industrial plant or portal structures of up to 30 m in height 2.Medium span portal, bridges or trusswork of up to 30 m Category S3 Firm that has the infrastructure, resources and capabilities to fabricate and erect structural steel structures of 3.Building, industrial plant or portal structures of up 20 m in height 4.Short span portal, bridges or trusswork of up 20 m Category S4 Firm that has the infrastructure, resources and capabilities to fabricate and erect structural steel structures of up to 10m in height and span. Definition Structural steel structures - Structures which required submission to BOA. FORM SF001-1 January 2011 Page 10 of 14

11 Category S1 Category S2 Category S3 Category S4 Financial Net tangible asset S$ 3 M S$ 2 M S$500,000 S$ 100,000 Human resources 1. Engineer Supervisory Skilled technical 1.Welder i. G3 and above 2.Fitter Track records Tonnage (past 3 years) 5,000t from projects of S1 category 2,000t from projects of at least S2 category 1,000t from projects of at least S3 category 100t of fabrication or erection of at least of S3 category Facilities Equipment 3,000 sq m of permanent covered facilities with hoisting facilities of at least one 10 tons gantry crane Refer to definition Facilities & Equipment 1,200 sq m of permanent covered facilities with hoisting facilities of at least one 5 tons gantry crane Refer to definition 500 sq m of permanent covered facilities with hoisting facilities Refer to definition 100 sq m of permanent covered facilities with hoisting facilities Refer to definition Quality and safety system Management System ISO 9001 ISO OHSAS FORM SF001-1 January 2011 Page 11 of 14

12 Definition Financial Category Si need to submit annual financial account Human resources Engineer 1 One engineer must process a recognized civil engineering degree* 2 The other recognized qualification# includes a Architectural & Mechanical degrees recognized by SIA and PEB respectively b Other Architectural, Civil and Mechanical degrees plus a StS Structural Steel Certificate c StE Note: For S1-S3 category, one civil engineer must meet criteria 1. #Criteria 2 is only applicable for S1-S2 whereby subsequent engineer's qualification can either meet criteria 1 or 2. *Civil engineering degrees stated in these two lists: http: // Supervisory Civil, Structural, Architectural, Building & Mechanical Diplomas, Architectural, Civil and Mechanical degrees, NCCS, StS Structural Steel Certificate and other certificates recognized by SSSS. Welders minimum of 3G level Fitter 1 SECA in steel fitting or other certificate that are recognized by SSSS 2 In-house issued Structural Steel Fitter competency certificate will be recognized if the firm can demonstrate (with evidences) it has established and implemented an effective training and evaluation structural steel fitting program. A Track Records The total steel tonnage should be related to structural steel structures only. Full tonnage recognized if it is a main contract and the contract involve fabrication and erection, 50% tonnage recognized if it is a main contract and the contract involve fabrication or erection only. 50% tonnage recognized if it is sub-contract and the contract involve fabrication and erection. 25% tonnage recognized if it is sub-contract and the contract involve fabrication or erection only. Note 1 Only track records of the main contract and 1st sub-contract are recognized 2 Main contract and 1st sub-contract are not allowed to total subcontract (fabrication and erection) the work out. FORM SF001-1 January 2011 Page 12 of 14

13 Equipment Category S1 Category S2 Category S3 Category S4 1. Cutting (any two machines) Normal cutting/ Normal cutting/ Normal cutting/ (any two a. CNC steel section sawing machines/ sawing sawing machines) sawing. Min 600W x 400H bench saw machines/ bench machines sawing area b. CNC steel plate cutting. Min 2400W cutting area c. CNC Profile machine saw 2. Drilling CNC steel section Normal drilling Normal drilling Normal drilling drilling. Min 600W x machine machine machine 400H drilling area 3. Punching Punching machine Punching Punching Punching machine machine machine 4. Welding Full range of welding equipment and Full range of welding Mig welder, electric arc Mig welder, electric arc facilities for shielded metal arc weld (SMAVV) and flux cored arc welding (FCAW) equipment and facilities for shielded metal arc weld (SMAVV) and flux cored arc welding (FCAW) welder welder 5. others Forklift, generators Forklift, generators - - Management System The ISO 9000 and OHSAS must be of the scope of 'Fabrication and erection of structural steel works' FORM SF001-1 January 2011 Page 13 of 14

14 Appendix 2 ACCREDITATION FEE (for auditing in Singapore only) SSSS Corporate Members Non-SSSS Corporate Members Audit Fee/ 2 years* - S1 Grade $2,120 $2,120 - S2 to S4 Grade $1,060 $1,060 2 years Registration Fee 0 $2,000 Audit outside of Singapore If the audit is conducted outside Singapore, the following will apply: (i) transportation, accommodation, travel insurance, visa fees and applicable taxes for the auditors to the location of audit will be provided by the applicant. (ii) SSSS will provide the appliant a quotation for audit fees outside Singapore. FORM SF001-1 January 2011 Page 14 of 14