KOOLTHERM K12 FRAMING BOARD AND K15 RAINSCREEN BOARD BCA Certificate number: CM Date of issue: 15/08/2017. Date of expiry: 21/03/2020
|
|
- Silas Allen
- 6 years ago
- Views:
Transcription
1 Certification Body: SAI Global Certification Services Pty Limited (ACN ) Trading as SAI Global JAS-ANZ Accreditation No. Z AS Address: 680 George Street, Sydney, NSW 2000 Website: Certificate Holder: Type and/or use of product: THIS TO CERTIFY THAT KOOLTHERM K12 FRAMING BOARD AND K15 RAINSCREEN BOARD The Kooltherm K12 Framing Board is a thermal insulation board for use behind wall lining and framed walls. The Kooltherm K15 Rainscreen Board is a thermal insulation board for use behind Rainscreen cladding systems. Description of product: Certificate number: CM20047 The K12 Framing Board and the K15 Rainscreen Board consists of three layers as follows: The facing on both sides is a low emissivity composite foil autohesively bonded to the insulation core during manufacture. The core is a fibre free rigid thermoset phenolic insulation. COMPLIES WITH THE FOLLOWING BCA PROVISIONS AND STATE OR TERRITORY VARIATION(S) BCA 2016 Volume One Volume Two Kingspan Insulation Pty Ltd 266 Beringarra Avenue, Malaga, WA 6090 Tel: Fax: info@kingspaninsulation.com.au Deemed-to-Satisfy Provision(s): C1.10 (inter alia Specification C1.10 clause 7) Fire hazard properties Building fabric thermal insulation (such that it is able to be used as part of a system outlined in clause subject to applicable State and Territory variations). J1.2 Thermal construction general (such that it is able to be used as part of a system outlined in clause J1.5 subject to applicable State and Territory variations). Date of issue: 15/08/2017 Nicole Grantham General Manager SAI Global Certification Services George Petrovski Unrestricted Building Certifier Date of expiry: 21/03/2020 Certificate number: CM20047 This certificate is only valid when reproduced in its entirety. Page 1 of 5
2 State or territory variation(s): NSW Specification C1.10 Clause 7 NSW Section J Fire hazard properties Energy use - Applicable only to Class 3 and 5-9 buildings (Class 2 and 4 parts of buildings are subject to BASIX). NSW Part 3.12 NT BCA Energy Efficiency Part 3.12 does not apply in NSW. Building fabric thermal insulation (such that it is able to be used as part of a system outlined in clause ). NT Section J Energy use - For a Class 2 building and a Class 4 part of a building, Section J is replaced with Section J of BCA Section J does not apply to Class 3 and 5-9 buildings. QLD Section J Energy use - In Queensland, for a Class 2 building, Section J is replaced with Section J of BCA SUBJECT TO THE FOLLOWING LIMITATIONS AND CONDITIONS AND THE PRODUCT TECHNICAL DATA IN APPENDIX A AND EVALUATION STATEMENTS IN APPENDIX B 1. For the purposes of the Building Code of Australia Volume One 2016 Specification C1.10 clause 7, the K12 framing board has been tested to AS and achieved a Spread of Flame Index of 0 and a Smoke Developed Index For the purposes of the Building Code of Australia Volume One 2016 Specification C1.10 clause 7, the K15 Rainscreen Board has been tested to AS and achieved a Spread of Flame Index of 0 and a Smoke Developed Index The product(s) must be used for its intended purpose. Scope of certification: The CodeMark Scheme is a building product certification scheme. The rules of the Scheme are available at the ABCB website This Certificate of Conformity is to confirm that the relevant requirements of the Building Code of Australia (BCA) as claimed against have been met. The responsibility for the product performance and its fitness for the intended use remain with the certificate holder. The certification is not transferrable to a manufacturer not listed on Appendix A of this certificate. Disclaimer: The Scheme Owner, Scheme Administrator and Scheme Accreditation Body do not make any representations, warranties or guarantees, and accept no legal liability whatsoever arising from or connected to, the accuracy, reliability, currency or completeness of any material contained within this certificate; and the Scheme Owner, Scheme Administrator and Scheme Accreditation Body disclaim to the extent permitted by law, all liability (including negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this certificate. Certificate number: CM20047 This certificate is only valid when reproduced in its entirety. Page 2 of 5
3 APPENDIX A PRODUCT TECHNICAL DATA A1 Type and intended use of product See type and/or use of product on page 1 A2 Description of product See Description of product on page 1 A3 Product specification The product specifications are contained within the following manuals; 1. Kooltherm K12 Framing Board INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS manual (Issue 9 Apr 2017): This contains the specification and installation methods of the product. 2. Kooltherm K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS manual (Issue 4 Nov 2015): This contains the specification and installation methods of the product. A4 Manufacturer and manufacturing plant(s) Kingspan Insulation Pty Ltd 266 Beringarra Avenue, Malaga, WA Manufactured in 25 O Herns Road, Somerton, VIC, 3062, Australia A5 Installation requirements The installation must be carried out in accordance with the following manuals; 1. Kooltherm K12 Framing Board INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS manual (Issue 9 Apr 2017): 2. Kooltherm K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS manual (Issue 4 Nov 2015): A6 Other relevant technical data Certificate number: CM20047 This certificate is only valid when reproduced in its entirety. Page 3 of 5
4 Nil APPENDIX B EVALUATION STATEMENTS B1 Evaluation methods The system has been assessed as complying with the identified Deemed-to-Satisfy Provision(s) of the BCA This involved a review of product specifications, test reports, installation manuals, and associated documentation. 1. Fire hazard properties assessment A2.2(a)(i) Report from NATA Accredited laboratory. 2. Energy use (inc NSW Variation, QLD Variation and NT Variation - A2.2(a)(i) / 1.2.2(a)(i) Report from NATA Accredited laboratory. 3. Energy use A0.5(c) Report from an appropriately qualified person. In addition; SAI Global CODEMARK Certification Evaluation Report dated 8 August 2017, Certification audit of Kingspan Insulation Pty Ltd 25 O Herns Road, Somerton, VIC, 3062, Australia dated 15/2/2017 which include assessments of the following; a) The Manufacturing details b) Operating and Maintenance procedures B2 Reports 1. AWTA - ASTM C Steady-State Thermal Transmission Properties by Means of the Heat Flow Apparatus, Kooltherm 38mm thick (test number: , dated 13/07/2017): 2. AWTA - ASTM C Steady-State Thermal Transmission Properties by Means of the Heat Flow Apparatus, Kooltherm 50mm thick (test number: , dated 12/05/2017): 3. AWTA - ASTM C Steady-State Thermal Transmission Properties by Means of the Heat Flow Apparatus, Kooltherm 60mm thick (test number: , dated 17/07/2017): Certificate number: CM20047 This certificate is only valid when reproduced in its entirety. Page 4 of 5
5 4. AWTA - ASTM C Steady-State Thermal Transmission Properties by Means of the Heat Flow Apparatus, Kooltherm 80mm thick (test number: , dated 27/04/2017): 5. AWTA - AS/NZS Methods for Fire Tests on Building Materials, Components and Structures Part 3: Simultaneous Determination of Ignitability, Flame Propagation, Heat Release and Smoke Release (test number: , dated 24/11/2014): This report provides the results of testing to AS/NZS and specifies the Ignitability, Flame Propagation, Heat Release and Smoke Release indices. 6. AWTA - AS/NZS Methods for Fire Tests on Building Materials, Components and Structures Part 3: Simultaneous Determination of Ignitability, Flame Propagation, Heat Release and Smoke Release (test number: , dated 22/02/2017): This report provides the results of testing to AS/NZS and specifies the Ignitability, Flame Propagation, Heat Release and Smoke Release indices. 7. Acronem Consulting Australia Pty Ltd - Report on Thermal Performance of 25 mm Kooltherm by Dr Cameron Chick (dated 3/08/2017): This report considers the relationship between Thermal Resistance and Thermal Conductivity with respect to the product thickness. The calculations in this report determines that 25mm thick Kooltherm Framing Board is capable of achieving an R-Value in the range of R1.21 to R1.29. Certificate number: CM20047 This certificate is only valid when reproduced in its entirety. Page 5 of 5
Certificate number: CM40087 Rev3
Certification Body: ABN: 80 111 217 568 JAS-ANZ Accreditation No. Z4450210AK PO Box 7144, Sippy Downs Qld 4556 +61 (07) 5445 2199 www.certmark.org Certificate Holder: ABN: 22 750 783 065 19 Lowermill Rd,
More informationK5 External Wall Board
Insulation A4/6 K5 AW2194 Issue 9 Apr 2017 INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell
More informationK8 Cavity Board. Insulation CAVITY WALL INSULATION
Insulation A4/6 K8 AW2194 Issue 13 Sep 2017 CAVITY WALL INSULATION Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Clear cavity is maintained resists
More informationBrick Veneer Walls. Insulation
Insulation A4/8 BV AW2157 Issue 7 Nov 2016 Brick Veneer Walls Insulation guide Helps achieve a 6-star house energy rating Rigid Kingspan Kooltherm and flexible Kingspan AIR-CELL solutions available Fibre-free,
More informationK5 External Wall Board
Insulation A4/6 K5 AW2161 Issue 5 Dec 2016 INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell
More informationK12 Framing Board. Insulation INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS
Insulation A4/8 K12 AW2194 Issue 10 Sep 2017 INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Can
More informationADVISORY NOTE Fire Performance of External Walls and Cladding Application
ADVISORY NOTE 2016-3 Fire Performance of External Walls and Cladding Application NCC Volume: Section/Part: One Various Date first issued: August 2016 Date revised: September 2016 Copyright and licence
More informationRetroshield XL TM. Insulation THERMO REFLECTIVE INSULATION
Insulation A4/6 TB055F AW2002 Issue 4 Sept 2015 THERMO REFLECTIVE INSULATION Innovative cross-linked closed-cell insulation core Improved Class 0 fire performance to stringent international standards 3-in-1
More informationK12 Framing Board. Insulation
Insulation A4/8 K12 AW2161 Issue 7 Dec 2016 INSULATION FOR USE BEHIND wall lining AND FRAMED WALLS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Can
More informationBuilding regulations now in force
BCA Section J: Guide to compliance Publication date July 2008 Building regulations now in force BCA SECTION J: Mandatory energy efficiency measures for non-residential construction The new BCA Section
More informationDouble Brick Cavity Walls
Insulation A4/6 DB AW1638 Issue 3 Feb 2014 Double Brick Cavity Walls Insulation guide Helps achieve a 6-star house energy rating Rigid Kingspan Kooltherm and flexible Kingspan AIR-CELL solutions available
More informationInsulwhite. Insulation WHITE-FACED THERMO REFLECTIVE INSULATION
Insulation A4/6 TB055W AW2244 Issue 6 Oct 2017 WHITE-FACED THERMO REFLECTIVE INSULATION Innovative cross-linked closed cell insulation core 3-in-1 Insulation, vapour barrier and radiant barrier Helps achieve
More information1 Product. 2 Scope of Use. IGNIS PERFORMANCE SOLUTION No I01R01. Ritek XL Thermal Wall System
IGNIS PERFORMANCE SOLUTION Evaluation No.4214 [2016] 1 Product Ignis Solutions has been engaged by Ritek Building Solutions to evaluate compliance of their Ritek XL Thermal Wall System against the Building
More informationK10 FM Soffit Board. Insulation
Insulation A4/8 K10FM AW2257B Issue 14 Dec 2017 K10 FM Soffit Board Insulation for concrete soffits Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core FM
More informationInsulbreak. Insulation. thermal break solution
Insulation A4/8 TB AW2199 Issue 8 May 2017 Insulbreak thermal break solution 3-in-1 Insulation, thermal break and vapour barrier Delivers a R0.20 thermal break solution for steel-framed construction Helps
More informationInsuliner. Insulation REFLECTIVE INSULATION FOR USE WHERE
Insulation A4/8 TB055G2 AW2235 Issue 8 Sep 2017 Insuliner REFLECTIVE INSULATION FOR USE WHERE it acts as the WALL OR CEILING LINING Group 2 NCC fire classification Designed for warehouses and commercial
More informationWALL LINER PRODUCT DATA SHEET FAÇADE & ROOF SYSTEMS
WALL LINER PRODUCT DATA SHEET FAÇADE & ROOF SYSTEMS INTRODUCTION BENCHMARK Wall Liner is an engineered insulated panel system that is ideal for fully supporting single skin metal sheeting such as zinc,
More informationPermicav XV TM NEXT GENERATION OF VAPOUR-PERMEABLE INSULATION FOR WALLS WITH CAVITIES
Insulation A4/8 PS055XV AW2244 Issue 5 Oct 2017 Permicav XV TM NEXT GENERATION OF VAPOUR-PERMEABLE INSULATION FOR WALLS WITH CAVITIES 5x higher vapour transmission than previous generation Reduces the
More informationPosition Statement. Product compliance and evidence of suitability
Version 1 Approved for release July 2014 1.0 FPA Australia advocates the following in relation to product compliance and for fire protection products used in Australia: Fit for purpose 1. Fire protection
More informationA GUIDE TO WINDOW AND DOOR SELECTION
Australian window association guide series A GUIDE TO WINDOW AND DOOR SELECTION An industry guide to the selection and certification of windows and doors Background Foreword As part of its commitment to
More informationInsulation. A4/6 AW2242 Issue 1 Oct Kingspan Insulation
Insulation A4/6 AW2242 Issue 1 Oct 2017 Kingspan Insulation Product Snapshot Welcome to Kingspan Insulation The Kingspan Group Kingspan Insulation is a Division of Kingspan Group plc, one of Europe s fastest
More informationPermifloor. Insulation WATER-PERMEABLE UNDERFLOOR INSULATION
Insulation A4/6 PSW AW1690 Issue 4 Apr 2014 Permifloor WATER-PERMEABLE UNDERFLOOR INSULATION Helps improve energy efficiency 2-in-1 insulation and moisture management solution Fibre-free, non-allergenic,
More informationControlled Environments. Product Data Sheet. Controlled Environment Panel System KS1100 CS
Controlled Environments Controlled Environment Panel System KS1100 CS Overview Kingspan controlled environment panel systems are designed for use within temperature controlled and hygiene safe environments
More informationAVK Australia Pty Ltd PRODUCT APPRAISAL REPORT PA 1707 Issue 3
WSAA Product Appraisal 06/09 Issue 3 1 AVK Australia Pty Ltd PRODUCT APPRAISAL REPORT PA 1707 Issue 3 Sureflow Series 2570 Resilient Seated Gate Valves AS 2638.2:2011 Gate valves for waterworks purposes
More informationFire protecting windows close to boundaries
Fire protecting windows close to boundaries product solutions Q1 Queensland Hyundai Head Office Sydney Digital Life Labs Melbourne ANZ Head Office Melbourne Stockhome, Stocklands HQ Sydney T: 1300 655
More informationInsulated Roof & Wall Panels. Foilback KS1000 FB Insulated Roof Panels. Product Data Sheet
Insulated Roof & Wall Panels Foilback KS1000 FB Insulated Roof Panels Overview Kingspan Foilback is supplied with a pre-painted Steel external (Aluzinc also available on request) with a choice of silver
More informationFire Engineering, the BCA (NCC) & Bushfire Calculator. Keith Nicholls - Manager Product Testing and Assessments (Australia) Exova Group Limited
Fire Engineering, the BCA (NCC) & Bushfire Calculator Keith Nicholls - Manager Product Testing and Assessments (Australia) Exova Group Limited Presentation Topics Current Building Code (fire safety) design
More informationEvaluation Report. for. Empire West, Inc Graton Road Post Office Box 511 Graton, California 95444
for Empire West, Inc. 9270 Graton Road Post Office Box 511 Graton, California 95444 CertMark International Pty Ltd (CMI) has awarded this Certification to the company named above for the Product/system
More informationAustralian/New Zealand Standard
AS/NZS 4417.1 Australian/New Zealand Standard Marking of electrical products to indicate compliance with regulations Part 1: General rules for use of the mark This Joint Australian/New Zealand Standard
More informationSEPARATING WALLS CLASS 1A
TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND SEPARATING WALLS CLASS 1A (DUPLEXES, TOWNHOUSES, BUILDINGS ROW HOUSES, TERRACE HOUSES) 33 RECOMMENDED PRACTICE // AUGUST 2014 Fire and sound are important
More informationTEST REPORT. Fire resistance load-bearing test of a 136mm thick Ozone Panels wall system tested in accordance with AS
TEST REPORT Fire resistance load-bearing test of a 136mm thick Ozone Panels wall system tested in accordance with AS 1530.4 2005. EWFA Report No: 2758400 Report Sponsor: Ozone Panels Level 31, 367 Collins
More informationBRE Global Assessment Report
BRE Global Assessment Report An assessment of the fire performance of the Gebrik Insulating Brick Cladding System against BR 135, Third Edition Prepared for: Date: 13 April 2016 Aquarian Cladding Systems
More informationThe great Aussie shed deserves great Australian insulation
polyair unicell The great Aussie shed deserves great Australian insulation FULLY COMPLIANT TO THE BCA Extra heavy duty Commercial grade Australian made 15 year warranty Why choose Bradford Polyair Unicell?
More informationDobbie Dico Meter Co (WA) Pty Ltd PRODUCT APPRAISAL REPORT 1622
WSAA Product Appraisal 1622 1 Dobbie Dico Meter Co (WA) Pty Ltd PRODUCT APPRAISAL REPORT 1622 Dobbie Resilient Seated Gate Valves DN 100 to DN 250 AS/NZS 2638.2:2011 Gate valves for waterworks purposes
More informationAVK Australia Pty Ltd PRODUCT APPRAISAL REPORT 1715
WSAA Product Appraisal 1714 1 AVK Australia Pty Ltd PRODUCT APPRAISAL REPORT 1715 Spring Hydrant Valves Sureflow Series 2030 AS 3952:2002 Water supply Spring hydrant valve for waterworks purposes Published:
More information6/16/2016. A FORENSIC EXAMINATION OF TALL BUILDING FACADE FIRES l Building Envelope Fires in Dubai Skyscrapers. Martin Edwards. The Address (Atkins)
A FORENSIC EXAMINATION OF TALL BUILDING FACADE FIRES l Building Envelope Fires in Dubai Skyscrapers Martin Edwards The Address (Atkins) 2016 - Probyn Miers 2010 Ltd ProbhynMiers Ltd 1 The Address Downtown
More informatione x a n g l e installation guide exangle Finishing Sections
e x a n g l e installation guide exangle Finishing Sections rondo exangle Finishing Sections CORNER BEADS 90º external corner beads are available in two profiles. Use P01 for a sharper finish or P32 for
More informationHIGH GLOSS. AcrylicPanels FOR ARCHITECTURAL INTERIOR DESIGN
HIGH GLOSS AcrylicPanels FOR ARCHITECTURAL INTERIOR DESIGN www.glazepanels.com.au Interior Vertical Surfaces FOR ARCHITECTURAL INTERIOR DESIGN Commercial Office GLAZE PANELS ARE A NEW DECORATIVE PANEL
More informationGreat Ocean Rd Ice Creamery
Great Ocean Rd Ice Creamery BCA Section J - JV3 Compliance Report Revision: 01 Job No: 2171 Date: 7 July 2015 ADP Consulting Pty Ltd Level 10, 10 Queens Rd, Melbourne Vic 3004 www.adpconsulting.com.au
More informationInsulation. First Issue December Kingspan Insulation TECHNICAL SERVICES. Low Energy Low Carbon Buildings
Insulation First Issue December 2015 Kingspan Insulation TECHNICAL SERVICES Low Energy Low Carbon Buildings The Technical Service from Kingspan Insulation Kingspan Insulation offers professional, expert
More informationAS/NZS 4505:1998 AS/NZS
AS/NZS 4505:2012 Incorporating Amendment No. 1 Australian/New Zealand Standard Garage doors and other large access doors Superseding AS/NZS 4505:1998 AS/NZS 4505:2012 AS/NZS 4505:2012 This Joint Australian/New
More informationCertMark Australasia CodeMark Assessment Brief' THE OZONE PANEL BUILDING SYSTEM. For
CertMark Australasia CodeMark Assessment Brief' For THE OZONE PANEL BUILDING SYSTEM PURPOSE Ozone Panels are load bearing precast panels made up of two facades of OSB3 composite sourced from organically
More informationExport Finance for SMEs
Export Finance for SMEs Natalie Reid Frost May 2016 Efic We are a specialist financier that delivers simple and creative solutions for Australian companies to enable them to win business, grow internationally
More informationTR26 LPC/FM / TR27 LPC/FM
Insulation A4/8 TR26/27 AW2163 Issue 2 Jan 2017 TR26 LPC/FM / TR27 LPC/FM INSULATION FOR WATERPROOFED FLAT ROOFS Super high performance rigid thermoset insulation LPCB approved to LPS 1181: Part 1 FM approved
More informationAustralian/New Zealand Standard
AS/NZS 4859.1:2002 (Incorporating Amendment No. 1) AS/NZS 4859.1:2002 Australian/New Zealand Standard Materials for the thermal insulation of buildings Part 1: General criteria and technical provisions
More informationREPORT GUNNS FOREST PRODUCTS AFS SUMMARY AUDIT REPORT APRIL 2006 REPORT NO ZAPAU980DAWES REVISION NO 1 DET NORSKE VERITAS
GUNNS FOREST PRODUCTS AFS SUMMARY AUDIT APRIL 2006 NO ZAPAU980DAWES060420-1 REVISION NO 1 DET NORSKE VERITAS Date of first issue: 20/04/2006 Approved by: Simon Dawes Manager - Climate Change and CSR Client:
More informationJuly 23, 2010 PARTIES INTERESTED IN REFLECTIVE FOIL INSULATION
July 23, 2010 TO: SUBJECT: PARTIES INTERESTED IN REFLECTIVE FOIL INSULATION Revisions to the Acceptance Criteria for Reflective Foil Insulation, Subject AC02-0610-R1 (LS/RB) Dear Madam or Sir: In June
More informationREGULATORY INFORMATION REPORT
REGULATORY INFORMATION REPORT The fire resistance performance of Hilti Flexible Firestop Foam CFS-F FX / CP 660 protecting cable and cable conduit penetrations in walls and concrete floors if tested in
More information04 ENCLOSURE 0471p KINGSPAN in thermal insulation and pliable membranes
0471P KINGSPAN IN THERMAL INSULATION AND PLIABLE MEMBRANES Branded worksection This branded worksection Template has been developed by NATSPEC in conjunction with KINGSPAN INSULATION Pty Ltd and may be
More informationJune 1, 2010 PARTIES INTERESTED IN EVALUATION REPORTS ON REFLECTIVE FOIL INSULATION
June 1, 2010 TO: PARTIES INTERESTED IN EVALUATION REPORTS ON REFLECTIVE FOIL INSULATION SUBJECT: Proposed Revisions to the Acceptance Criteria for Reflective Foil Insulation, Subject AC02-0610-R1 (LS/RB)
More informationMineral-Fibre Thermal Insulation for Buildings
Preface MASTERFORMAT 07 21 13.19 REVISED DATE 2011-06-22 Mineral-Fibre Thermal Insulation for Buildings Scope These Evaluation Listings apply to mineral-fibre thermal insulation in the form of faced and
More informationSUPERCOURSE 500 DAMP-PROOF COURSE AND CONCEALED FLASHING. Product. Scope. Building Regulations. Appraisal No. 329 [2016]
DAMP-PROOF COURSE AND CONCEALED FLASHING This Appraisal replaces BRANZ Appraisal No. 329 (2005) Amended 23 February 2017 BRANZ Appraisals Technical Assessments of products for building and construction.
More informationWall. . Made from over 80% recycled glass making sustainable use of waste
Application Pink Batts wall insulation is a lightweight flexible glass wool insulation product designed to: Thermally insulate timber and steel framed walls Fit easily into standard wall constructions,
More informationAS/NZS 3010:2005 AS/NZS
AS/NZS 3010:2017 Australian/New Zealand Standard Electrical installations Generating sets Superseding AS/NZS 3010:2005 AS/NZS 3010:2017 AS/NZS 3010:2017 This joint Australian/New Zealand standard was prepared
More informationSymonite Decorative Panelling
Symonite Decorative Panelling WHY SYMONITE? Symonite is the only Australian manufactured aluminium composite panel. An Australian owned company whose continuous composite panel research and development
More informationOne-Steel Recycling Waste ferrous metal in Australia. Estimate of steel disposed to landfill
One-Steel Recycling Waste ferrous metal in Australia Estimate of steel disposed to landfill Hyder Consulting Pty Ltd ABN 76 104 485 289 Level 5, 141 Walker Street Locked Bag 6503 North Sydney NSW 2060
More informationAustralian/New Zealand Standard
AS/NZS 3666.3:2000 AS/NZS 3666.3 Australian/New Zealand Standard Air-handling and water systems of buildings Microbial control Part 3: Performance-based maintenance of cooling water systems AS/NZS 3666.3:2000
More informationGTEK TM SOUND GTEK TM IMPACT
APRIL 2016 TECHNICAL BROCHURE GTEK TM SOUND GTEK TM IMPACT gtekplasterboard.com.au GTEK TM SOUND WHY GTEK TM? WITH OUR ALL-AUSTRALIAN GTEK RANGE OF INTERIOR LINING PRODUCTS, YOU BENEFIT FROM SUSTAINABLE,
More informationSUPERLINK TM NEW IMPROVED RANGE OF DUCTILE IRON FITTINGS TO SUIT ALL PIPE MATERIALS. Lightweight. Deep Sockets. Nylon Coated. Corrosion Resistant
SUPERLINK TM II NEW IMPROVED RANGE OF DUCTILE IRON FITTINGS TO SUIT ALL PIPE MATERIALS Lightweight Deep Sockets Nylon Coated Corrosion Resistant Series 1 & 2 Adaptable WaterMark Licence WSAA Appraisal
More informationexangle installation guide EXANGLE Finishing Sections
exangle installation guide EXANGLE Finishing Sections rondo exangle FINISHING SECTIONS GENERAL INFORMATION The Rondo EXANGLE and EXANGLE Render & Texture range has been developed over 45 years by Rondo
More informationRENEWABLE ENERGY JOBS: FUTURE GROWTH IN AUSTRALIA 2017 SUPPLEMENT. Climate Council of Australia
RENEWABLE ENERGY JOBS: FUTURE GROWTH IN AUSTRALIA 2017 SUPPLEMENT Climate Council of Australia ACKNOWLEDGEMENTS Thank you for supporting the Climate Council. The Climate Council is an independent, crowd-funded
More informationFACT SHEET COMMISSION-ONLY CONDITIONS THAT MUST BE MET
FACT SHEET - 2014 COMMISSION-ONLY CONDITIONS THAT MUST BE MET Commission-only is meant only for experienced salespersons with a proven track record. Every one of the following conditions MUST be met before
More informationAustralian/New Zealand Standard
AS/NZS 1546.2:2008 AS/NZS 1546.2:2008 Australian/New Zealand Standard On-site domestic wastewater treatment units Part 2: Waterless composting toilets AS/NZS 1546.2:2008 This Joint Australian/New Zealand
More informationKINGSPAN INSULATION KOOLTHERM K15 RAINSCREEN INSULATION BOARD
Kingspan Insulation Ltd Pembridge Leominster Herefordshire HR6 9LA Tel: 0870 850 8555 Fax: 0870 850 8666 e-mail: info.uk@insulation.kingspan.com website: www.insulation.kingspan.com APPROVAL INSPECTION
More informationMarket Access Update 19 Tomato-potato psyllid (TPP) complex
Market Access Update 19 Tomato-potato psyllid (TPP) complex 18 August 2017 This update contains information specific to tomato-potato psyllid (TPP) and Candidatus Liberibacter solanacearum (CLso) interstate
More informationNEM EVENT - DIRECTION TO SOUTH AUSTRALIA GENERATOR - 9 FEBRUARY 2017
NEM EVENT - DIRECTION TO SOUTH AUSTRALIA GENERATOR - 9 FEBRUARY 2017 Published: July 2017 IMPORTANT NOTICE Purpose AEMO has prepared this report in accordance with clause 3.13.6A(a) of the National Electricity
More informationAustralian Standard. Certification of welders and welding supervisors. AS (Incorporating Amendment No. 1) AS 1796
AS 1796 2001 (Incorporating Amendment No. 1) AS 1796 Australian Standard Certification of welders and welding supervisors This Australian Standard was prepared by Committee ME-001, Pressure Equipment.
More informationN1 to N3. DuraGalPlus Domestic Construction Manual. Volume 3: DuraGalPlus RHS as floor beams (bearers)
N1 to N3 Domestic Construction Manual Volume 3: RHS as floor beams (bearers) DuraGal Domestic Construction Manual Volume 1: Roof beams - N1 to C3 (N1 to C3 - Rafters) (N1 to N3 - Roof beams, strutting
More informationCode Compliance Research Report CCRR-0228
Code Compliance Research Report CCRR-0228 Issue Date: 05-09-2017 Renewal Date: 05-11-2018 Revision Date: 06-23-2017 DIVISION: 07 00 00 THERMAL AND MOISTURE PROTECTION Section: 07 40 00 Roofing and Siding
More informationGalintel Steel Lintels
Galintel Steel Lintels selection guide & load tables Galintel pty ltd Galintel Pty Ltd A division of the Graham Group An Australian owned Company with more than 50 years experience The Graham Group is
More informationAbu Dhabi Certification Scheme for Ceiling and Wall Board Products
Abu Dhabi Certification Scheme for Ceiling and Wall Board Products Assessment and Surveillance Plan Page i Amendment Page To ensure that each controlled copy of this ASP contains a complete record of amendments,
More informationSAFE WORK METHOD STATEMENT (SWMS)
ABN: 12 345 678 910 ACN: 123 456 789 Address: Your Company Address PH: Your Company Phone E: Your Company Email Web: Your Company Website PROJECT DETAILS: Project: SAFE WORK METHOD STATEMENT (SWMS) Area:
More informationAustralian Standard. Formwork for concrete. AS (Incorporating Amendment No. 1) AS 3610
AS 3610 1995 (Incorporating Amendment No. 1) AS 3610 Australian Standard Formwork for concrete This Australian Standard was prepared by Committee BD-043, Formwork. It was approved on behalf of the Council
More informationMATERIAL SAFETY DATA SHEET
Loaded polymer acoustic material Other Name: Nuwave Base, Flexible Barrier, FourZero, NuWrap. 1. PRODUCT AND COMPANY IDENTIFICATION Supplier Name THERMOTEC AUSTRALIA PTY LTD Address: 168 Carrington Street,
More informationDobbie Dico Meter Co (WA) Pty Ltd PRODUCT APPRAISAL REPORT 13/15
WSAA Product Appraisal 13/15 1 Dobbie Dico Meter Co (WA) Pty Ltd PRODUCT APPRAISAL REPORT 13/15 Ductile Iron Pipe Fittings DN 100 DN 250 AS/NZS 2280:2012 Ductile iron pipes and fittings Publication Date:
More informationexangle installation guide EXANGLE Finishing Sections
exangle installation guide EXANGLE Finishing Sections rondo exangle FINISHING SECTIONS GENERAL INFORMATION The Rondo EXANGLE and EXANGLE Render & Texture range has been developed over 45 years by Rondo
More informationSOLITEX EXTASANA WALL PROTECTION MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 822 [2013] Appraisal No. 822 (2013) Amended 06 May 2014
SOLITEX EXTASANA WALL PROTECTION MEMBRANE Amended 06 May 2014 BRANZ Appraisals Technical Assessments of products for building and construction. Pro Clima Australia Pty Ltd PO Box 924 Gosford NSW 2250 Australia
More informationHILTI CP 674 Cavity Closure For Rainscreen / Cladding Systems
Data Sheet HILTI CP 674 Cavity Closure For Rainscreen / Cladding Systems The enclosed pages are taken from the Hilti Firestop Systems Manual Edition April 2011 Supported by additional standard details
More informationBS 476: Part 6: Method Of Test For Fire Propagation For Products. WF Additional Report Number: Date: 18 th February 2008.
BS 476: Part 6: 1989 Method Of Test For Fire Propagation For Products WF Additional Report Number: 170998 Date: 18 th February 2008 Test Sponsor: Lindab Limited 0249 Page 2 of 15 Bodycote warringtonfire
More informationAustralian Standard. Qualification of welders for fusion welding of steels AS AS
AS 2980 2004 AS 2980 2004 Australian Standard Qualification of welders for fusion welding of steels This Australian Standard was prepared by Committee WD-003, Welding of Structures. It was approved on
More informationStainless Metal Craft (Aust) Pty Ltd
Stainless Metal Craft (Aust) Pty Ltd Product Appraisal Report TWA 1001 Stainless Steel Boat Shaped Passive Grease Arrestor GT-1 1000L GT-1.5 1500L GT-2 2000L GT-3 3000L GT-4 4000L GT-5 5000L Published
More informationtotal quality total service Total Steel
TECHNICAL BULLETIN 4 Linear Abrasion Wear Tests on 360 Brinell and EHSP Steel Plate with Black Coal Report No 5785 January 1999 Client: Total Steel of Australia Pty Ltd total quality total service Total
More informationAustralian Standard. Pressure vessels. AS (Incorporating Amendment Nos. 1, 2 and 3) AS 1210
AS 1210 1997 (Incorporating Amendment Nos. 1, 2 and 3) AS 1210 Australian Standard Pressure vessels This Australian Standard was prepared by Committee ME-001, Pressure Equipment. It was approved on behalf
More informationSOLITEX EXTASANA ADHERO SELF-ADHESIVE UNDERLAY. Product. Scope. Appraisal No. 989 [2017] Appraisal No. 989 (2017) BRANZ Appraisals
SOLITEX EXTASANA ADHERO SELF-ADHESIVE UNDERLAY BRANZ Appraisals Technical Assessments of products for building and construction. Product 1.1 is a self-adhesive, synthetic underlay for use over rigid wall
More informationREGULATORY INFORMATION REPORT. An assessment of the fire resistance of CSR Hebel external wall panels if tested in accordance with AS
REGULATORY INFORMATION REPORT An assessment of the fire resistance of CSR Hebel external wall panels if tested in accordance with AS1530.4-2005. EWFA Report No: RIR 24648-07 Report Sponsor: CSR Panel Systems
More informationControlled Environments. KS1100 CS Data Sheet. Controlled Environment Panels. Insulated Panels
Controlled Environments KS1 CS Data Sheet Controlled Environment Panels Insulated Panels KS1 CS Technical Data Product Overview Kingspan Controlled Environment panels are designed for use within temperature
More informationCombustible Exterior Wall Cladding Systems: An ICC Perspective
Combustible Exterior Wall Cladding Systems: An ICC Perspective The tragic Grenfell Tower fire in London brought extensive public focus on combustible exterior wall systems, often called cladding, prompting
More informationTEST REPORT. Bushfire resistance test of an external wall system to BAL A40 in accordance with AS EWFA Report No:
TEST REPORT Bushfire resistance test of an external wall system to BAL A40 in accordance with AS1530.8.1-2007 EWFA Report No: 38031900.1 Report Sponsor: Ullrich Aluminium PO BOX 246 Carole Park QLD 4300
More informationMagnetic Particle Inspection Proficiency Testing Program
y REPORT NO. 542 Magnetic Particle Inspection Proficiency Testing Program May 2007 ACKNOWLEDGMENTS PTA wishes to gratefully acknowledge the technical assistance provided for this program by Mr Jim Scott,
More informationKAEFER Integrated Services Pty Ltd
KAEFER Integrated Services Pty Ltd An Introduction to Insta-Lag and TIPS 1 Prefabricated Insulation Systems The prefabricated Insta-Lag and TIPS insulation systems are designed by KAEFER as innovative,
More informationPROMATECT -S Smoke & Fire Barrier
PROMATECT -S Smoke & Fire Barrier Introduction The purpose of a cavity barrier is to prevent the spread of smoke and flame from penetrating and/or moving within a concealed space in a fire compartment.
More informationOLYMPUS PRODUCT SERVICE REPAIR FORM Ref:
Australia Wide Customer Service Customer Service & Repairs Phone: 1300 659 678 Customer Service & Repairs Fax: (02) 9889 7988 OLYMPUS PRODUCT SERVICE REPAIR FORM Ref: Delivery Details: (please tick) Customer
More informationScheduled maintenance and rectification works. Systems integration and comprehensive reporting
Distribution We have significant experience in asset management, maintenance and construction for overhead and underground electricity distribution networks. This enables us to consistently add-value,
More informationFOR FURTHER INFORMATION ON THE KOOLTHERM RANGE OF PRODUCTS PLEASE TELEPHONE THE KINGSPAN TECHNICAL SERVICES DEPARTMENT (01457)
FOR FURTHER INFORMATION ON THE KOOLTHERM RANGE OF PRODUCTS PLEASE TELEPHONE THE KINGSPAN TECHNICAL SERVICES DEPARTMENT (01457) 861611 INDUSTRIAL INSULATION Kingspan Industrial Insulation Limited PO Box
More informationAustralian Standard. Interchange of client information AS (Incorporating Amendment No. 1) AS
AS 4590 2006 (Incorporating Amendment No. 1) AS 4590 2006 Australian Standard Interchange of client information This Australian Standard was prepared by Committee IT-027, Data Management and Interchange.
More information(Project Location) (your firm's name)
SECTION 07 21 00 THERMAL INSULATION PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including the Conditions of the Contract and Division 01 Specification Sections
More informationBCA Section J Compliance Report. Alterations & Additions to Cottage at St Johns College 10 Missenden Road Camperdown
BCA Section J Compliance Report Alterations & Additions to Cottage at St Johns College 10 Missenden Road Camperdown Prepared by: Gradwell Consulting ABN 68 872 791 784 Sustainability Consultants PO Box
More information(Rev. 2000) STANDARD
202-96 (Rev. 2000) STANDARD For Flexible Fiber Glass Insulation to be Laminated for Use in Metal Buildings www.naima.org NAIMA 202-96 STANDARD (Rev. 2000) For Flexible Fiber Glass Insulation to be Laminated
More informationEvaluation Listing CCMC L Boreal Lavender and Boreal Nature
Evaluation Listing CCMC 14025-L Boreal Lavender and Boreal Nature MasterFormat: 07 21 19.02 Evaluation issued: 2015-10-16 Revised: 2016-10-05 Re-evaluation due: 2018-10-16 1. Evaluation The product conforms
More information