Industrial floor coatings. Quick & Easy to use! Painting your floor has never been easier!

Transcription

1 Industrial floor coatings Quick & Easy to use! Standard Anti-Slip Decorative Painting your floor has never been easier!

2 Concrete floors are normally subject to heavy loads, vehicle parking, pedestrian traffic, etc. Floor coatings are ideal for protecting bare concrete against dust forming, moisture drips, chemical spillage and pedestrian/vehicle traffic. They can also be used for line marking, indicating pedestrian walkways and to increase safety by using anti-slip finishes. However, to most people painting floors is not the easiest of jobs. Choosing the right coating system is complicated, technical knowledge is required and surface preparation and paint application are often time consuming. Now, painting your floor is finally made easy with EpoxyShield from RUST-OLEUM : Ease of choice Select your preferred floor coating in just 3 easy steps Ease of application No technical knowledge required, does what is says on the tin Long-lasting / Maximum durability Highly resistant against dust, solvents/chemicals and medium vehicle traffic Water based formulas Better for you, better for the environment 2 1 Cross-Linking Technology : TM 1 Maximum adhesion 3 2 Abrasion & chemical resistance 3 Network of crisscrossing polymer chains

3 Choose your perfect floor in 3 easy steps! 1) Choose protection level SEALER ULTRA MAXX Dust proofing Light-Medium traffic Medium-Heavy traffic 2) Choose colour RAL 7001 RAL 7035 RAL 1015 RAL 6011 RAL 6005 English red 3) Choose finish (optional) + = + = Anti-Slip finish Decorative finish Painting your floor has never been easier!

4 Choose protection level: 5220 SEALER Dust proofing SEALER The excellent Dust-Proofer Water based, cost-effective, quick drying Single pack, easy to apply Non yellowing clear finish (gloss) Protects against moisture and road salts Touch dry after just 1 hour Ideal primer for EpoxyShield ULTRA coatings 5200 ULTRA Light-Medium traffic ULTRA Quick drying floor coating Single pack, water based For light to medium traffic Easy to apply Touch dry after just 2 hours Satin matt finish Good resistance to car tyres and various chemicals

5 5300 MAXX Medium-Heavy traffic MAXX Maximum durability in just 1 coat 2-Pack water based epoxy For medium to heavy traffic Easy to apply, no primer required Long-lasting gloss finish Best possible car tyre resistance Highly resistant against solvents and chemicals Non-skid or decorative finish optional Also available as garage floor coating kit One kit for 25 m 2 2-pack water based epoxy 1 coat suffices Easy to clean Complete kit with free instructional DVD Resists gasoline, antifreeze, motor oil, salt and hot tyre pick-up Painting your floor has never been easier!

6 SEALER Dust proofing Binder type Vinyl Acrylic Dilution Water based Coverage (m 2 /l) 10 m 2 /l Coating layers 2 Appearance Gloss Volume solids 30% Drying times 20ºC / 50% r.h.: Touch dry 1hr Recoatable 6 hrs Foot traffic 8 to 12 hrs Fully cured 12 hrs VOC level 77 g/l Hot tyre resistance -/+

7 ULTRA MAXX Light-Medium traffic Medium-Heavy traffic Epoxy-modified acrylic Epoxy Water based Water based 9 m 2 /l 7 m 2 /l 2 1 Satin-matt Gloss 38-42% 52,5% Drying times 20ºC / 50% r.h.: Drying times 20ºC / 50% r.h.: 2 hrs 16 hrs 6 hrs 2 days 16 hrs 16 hrs 7 days 7 days 72 g/l 53 g/l + ++ WATER BASED EN PHASE AQUEUSE WATERBASIS WASSERBASSIERT Painting your floor has never been easier!

8 Colours/Finish 5220 SEALER Gloss finish Transparent 5200 ULTRA Satin Matt finish RAL 7001 Art.nr 5282 RAL 7035 Art.nr 5281 RAL 6005 Art.nr 5237 RAL 1015 Art.nr 5242 RAL 6011 Art.nr 5235 English red Art.nr MAXX Gloss finish RAL 7001 Art.nr 5382 RAL 7035 Art.nr 5381 RAL 6005 Art.nr 5337 RAL 1015 Art.nr 5342 RAL 6011 Art.nr 5335 English red Art.nr 5368

9 Special Finishes Anti-Slip finish (EpoxyShield MAXX only) + = Anti-Slip additive 5300 MAXX RAL 7001 RAL 7035 RAL 6005 RAL 6011 RAL 1015 Decorative finish English red (EpoxyShield MAXX only) + = Decorative chips 5300 MAXX RAL 7001 RAL 7035 RAL 6005 RAL 1015 RAL 6011 English red Painting your floor has never been easier!

10 Products for a better end-result EpoxyShield Cleaner/degreaser Art.nr A ready to use cleaner/degreaser for floors Ideal for surface preparation Removes grease, oil and other contaminations Virtually odour free Non-flammable 6-8 m 2 /l coverage EpoxyShield CLEANER/DEGREASER EpoxyShield Concrete Repair Mortar FREE trovel / stir stick included in kit Art.nr

11 EpoxyShield Fine Crack Repair FREE Spatula included in packaging Art.nr Fine Crack Repair Mortar (non shrink epoxy) Solvent-free formula Fills cracks up to 3mm Dry in 3-4 hours Coverage 25 linear metres ( 2mm wide, 5 mm deep) Simply add water, stir and apply! Creates a natural looking concrete surface Mineral-Acrylic Traffic allowed after 24 hours 100% shrink free Sandable to a smooth finish 10 kg for approx. 0,4 m 2 To recoat: 48 hrs To recoat: 48 hrs To recoat: 48 hrs To recoat: 48 hrs To recoat: 48 hrs Painting your floor has never been easier!

12 Industrial floor coatings Quick & Easy to use! Rust-Oleum Netherlands B.V. P.O. Box AC Roosendaal The Netherlands T: +31 (0) F: +31 (0) Rust-Oleum UK Ltd. Rotterdam House 116 Quayside Newcastle, NE1 3DY United Kingdom T +44 (0) F +44 (0) info@rust-oleum.eu Rust-Oleum France S.A.S. 11, rue Jules Verne - B.P St-Leu-La-Forêt Cedex France T: +33 (0) F: +33 (0) info@rust-oleum.eu N.V. Martin Mathys S.A. Kolenbergstraat Zelem Belgium T: +32 (0) F: +32 (0) info@rust-oleum.eu WATER BASED EN PHASE AQUEUSE WATERBASIS WASSERBASSIERT Your Rust-Oleum distributor: Rust-Oleum products are manufactured by Rust-Oleum Netherlands B.V. under license from Rust-Oleum International Corporation, USA. Rust-Oleum and EpoxyShield are registered trademarks of Rust-Oleum International Corporation, USA. Copyright 2004 by Rust-Oleum Netherlands B.V V377.GB