Architectural Moldings

Transcription

1 Architectural Moldings Beauty, Versatility and Durability th Ave. East Phone: (941) Fax: (941)

2 th Ave. East Phone: (941) Fax: (941) Table of Contents Company Introduction Page 1 Catalog of Moldings Page 2 18 Installation Suggestions and Warranty Page 19 Ordering / Billing / Payment / Delivery Page 20

3 th Ave. East Bradenton, FL Phone: 7282 (941) 55 th Ave East Fax: Bradenton, (941) FL Phone: (941) Fax: (941) Cutting Edge is a SW Florida manufacturer of EPS (foam) shapes with various coating options available in both base and finished textures. Cutting Edge manufactures an endless variety of architectural shapes that enhances the exterior and interior of residential and commercial real estate. However, our ability to design shapes is only limited by your imagination if you can dream it, we can create it. EPS products are lightweight, economical, moisture resistant, termite-proof and also provide improved insulation. Cutting Edge s EPS coating process enhances the rigidity of the material and increases jobsite productivity by improving installation time. Cutting Edge utilizes state-of-the-art manufacturing equipment and processes which significantly reduce industry standard lead times and enhance customer service. Our company is owned and operated by individuals with over 50 years of successful business management. From the largest commercial project to the smallest residential refurbishing, Cutting Edge is dedicated to providing its customers with the highest quality products and customer service. 1

4 CATALOG OF ARCHITECTURAL MOLDINGS ALL PRODUCTS SHOULD BE USED AND INSTALLED IN ACCORDANCE WITH LOCAL BUILDING CODES Drawings Prepared By: Page 2

5 INDEX OF MOLDINGS (941) ALL PRODUCTS SHOULD BE USED AND INSTALLED IN ACCORDANCE WITH LOCAL BUILDING CODES Page 3

6 "Customize your own, or choose from ours." CE-BM100 CE-BM101 CE-BM102 CE-BM103 CE-BM104 CE-BM105 CE-BM106 CE-BM107 CE-BM108 CE-BM109 CE-BM110 Band Moldings Page 4

7 CE-BM111 CE-BM112 CE-BM113 CE-BM114 CE-BM115 CE-BM116 CE-BM117 CE-BM118 CE-BM119 CE-BM120 CE-BM121 CE-BM122 Band Moldings Page 5

8 "Customize your own, or choose from ours." CE-CM100 CE-CM101 CE-CM102 CE-CM103 CE-CM104 CE-CM105 CE-CM106 CE-CM107 CE-CM108 CE-CM109 CE-CM110 Crown Moldings Page 6

9 CE-CM111 CE-CM112 CE-CM113 CE-CM114 CE-CM115 CE-CM116 CE-CM117 CE-CM118 CE-CM119 CE-CM120 CE-CM121 CE-CM122 Crown Moldings Page 7

10 "Customize your own, or choose from ours." CE-TR100 CE-TR101 CE-TR102 CE-TR103 CE-TR104 CE-SL100 CE-SL101 CE-SL102 CE-SL103 CE-SL104 CE-SL105 Door & Window Moldings Page 8

11 CE-CLM100 CE-CLM101 CE-CLM102 Post Cut-Out Whole Wall Cut-Out Corner 3/4 Flat 3/4 1/2 Column Customize 1/4 Column CE-CLM103 CE-CLM104 Cutting Options Columns, Caps, & Bases Page 9

12 "Customize your own, or choose from ours." CE-CP100 CE-CP101 CE-CP102 CE-CP103 CE-CP104 CE-BS100 CE-BS101 CE-BS102 CE-BS103 CE-BS104 CE-BS105 Columns, Caps, and Bases Page 10

13 Customize your own, or choose from ours. CE-PP100 CE-PP101 CE-WC100 CE-WC101 CE-WC102 CE-BLT100 CE-BLT101 CE-BLT102 Round and square piers can be made in any size, shape, design or customized. CE-PC100 CE-PC101 CE-PC102 CE-PC103 Piers Pier Caps Wallcaps, Piers, & Balusters Page 11

14 "Customize your own, or choose from ours." CE-KS100 CE-KS101 CE-KS102 CE-KS103 CE-KS104 CE-QN100 CE-QN101 Quoins & Keystones Page 12

15 CE-CM205 CE-SL127 CE-BM129 CE-CM177 Any band, crown, door, or window molding can be made into an arch. Another option is to create your own arch. Arches Page 13

16 "Customize your own, or choose from ours." CE-SH100 CE-SH101 CE-SH102 CE-SH103 CE-SH104 Shutters Page 14

17 "Customize your own, or choose from ours." "Insert Drawing Here" CE-MD100 CE-MD101 CE-MD102 CE-MD103 CE-MD104 CE-MD105 CE-MD106 Customize CE-QS100 CE-QS101 CE-QS102 CE-QS103 CE-QS104 Quad Quad Shapes Medallions Page 15

18 CE-CM145 CE-BM128 CE-CM163 Any band, crown, door, or window molding can be made into a bracket. Another option is to create your own bracket. Brackets Page 16

19 "Customize your own, or choose from ours." CE-MS100 CE-MS101 CE-MS102 CE-MS103 CE-MS104 Monument Signs Page 17

20 "Customize your own, or choose from ours." CE-VC100 CE-VC101 CE-VC102 CE-VC103 CE-VC104 Any band, crown, door, or window molding can also be used as an interior shape. Please contact your Cutting Egde Sales Representative for information on our interior moldings and coating options. IMPORTANT NOTE: All information and data provided in this brochure is believed to be reliable and is presented in good faith. It does not, however, form a part of the conditions and terms of the sale of Cutting Edge products. The application, characteristics, properties and performance of materials and products herein described shall not be deemed to constitute a warranty expressed or implied, that said products or materials are fit for a particular purpose. Cutting Edge assumes no responsibility for the performance, or the effects of the performance, of materials and products described herein. WARNING, FLAMMABLE: Keep away from fire, sparks and heated surfaces. Expanded Polystyrene (EPS) foam like most Plastics, is flammable. Do not expose EPS to open flames or other ignition, direct or indirect high temperature, burning operations, welding, lit cigarettes, space heaters or naked light bulbs. When burning, EPS has the potential to consume oxygen. Interior Shapes Page 18

21 7282 PMB 55 th Ave. 176 East Bradenton, FL th Ave East Phone: Bradenton, (941) FL Fax: Phone: (941) (941) Fax: (941) Installation (typical in stucco base products) Review local building codes before proceeding with installation. Installation kits can be customized at your request. Surfaces must be clean, dry and free of any loose impediments. Apply adhesive to cover back side of shape. While adhesive is still wet, attach shape to the surface. Some shapes may require mechanical fasteners to prevent slippage. When adhesive is completely dry, carefully remove mechanical screws (if used for fastening) or apply base coat over screws to prepare surface for finish coat. When connecting shapes together, apply fiber mesh and base coat at the joint to prevent cracking. Sand any excess material from joint to ensure a smooth surface. For installation assistance on non-stucco base and finish products, please contact your sales representative. Warranty Cutting Edge (Cutting Edge) warrants that the architectural products manufactured and distributed by Cutting Edge are free from manufacturing defects when installed in accordance with guidelines and instructions, where indicated, and in accordance to the customary and ordinary standards of the industry. Cutting Edge s sole responsibility shall be for the replacement of the product only, when it has been determined by Cutting Edge that the product was defective as a result of manufacturing and not as a result of improper installation or handling. Cutting Edge assumes no liability or responsibility for any direct, indirect or consequential damages that may arise from the use of any architectural product manufactured and distributed by Cutting Edge. Additionally, Cutting Edge assumes no responsibility for any defective product not manufactured or distributed by Cutting Edge in which a product of Cutting Edge is attached to or made a part of said product. The above warranty and limited remedy is made in lieu of all other warranties, express or implied, including, but not limited to, the implied warranty of merchantability, the implied warranty of fitness for a particular purpose, and any implied warranty arising out of course of dealing, or a custom, or usage of trade. 19

22 7282 PMB 55 th 176 Ave. East Bradenton, th FL Ave East Phone: Bradenton, (941) FL Fax: Phone: (941) (941) Fax: (941) Ordering Foam shapes can be ordered from our existing designs included in our catalog, or if you prefer designing your own shapes, our design department can assist you. Lead time: o 3 to 5 business days for raw foam shapes. o 10 to 15 business days for coated (base or finish) shapes. Scaled drawings, signed by both parties, are required with the initial order. If not available, shop drawings will be produced for your convenience. All dimensions for the shapes must be indicated for the initial drawings. Payment The minimum order is $100. We require a 50% deposit, at the time the order is placed, on all orders, with the balance due upon delivery or pick-up. We accept Visa or MasterCard for all payments or deposits. Delivery All pricing is based on FOB Bradenton plant location. All material can be picked up at our Bradenton plant location without charge. Additionally, we offer delivery to any location, either in our trucks or through an outside common carrier. Customer service is a top priority, and we will work with our customers to meet all product availability and delivery requirements. 20