System S 9a/b Concealed, demountable

Transcription

1 Ceilings Information from OWA OWAcoustic System S 9a/b Concealed, demountable

2 System S 9a Technical Data Product line: OWAcoustic Dimensions: 600 x 600 mm 6 x 6 mm Widths: 300, 00 mm Lengths: 00, 0 mm Other sizes available on request 8 Thickness: approx. 0 mm Building Class: A-s,d0 to EN 30- Edge details: Long edges 6 3 Short edges 0 Metal Suspensions: All metal components listed are galvanized steel or white painted. For further details and colours see -Price list Suspension depth: Minimum suspension depth approx. 6 mm (from underside of soffit) Direct fixing approx. 6 mm + timber batten Fire protection: See OWA Brochure No. 00 Suspension system: Section Hanger No. /0, max. centres 0 mm Main Tee section No. 0, max. centres 0 mm 3 Connector No. Wire clips No. 60 ( per junction) Stepped Z-Section No. 63, max. centres 6 mm 6 Stepped Z-Connector No. 6 L-Section No. ( per tile) 8 Wall angle No. 0 G 9 Tight-up clip No. 6 ( per junction) 0 Timber batten, max. centres 0 mm Tile width Tile length Cross section 0 0 Direct fixing: 0 Tile removal: The tiles can be removed directly downwards and re-inserted within the depth of the Z-section. 9 6

3 OWAcoustic System S 9a Wall perimeter details: Tiles with their width on the perimeter wall angle or other sections cannot be removed directly downward. In smaller as well as narrow areas, at least 3 rows of tiles per installation are required so that the first full tile from the wall and then the wall tile can be removed. For other examples of perimeter wall details and installation see OWA-Installation guide Installation examples: Normal room installation using linear planks Small or narrow areas 3 tiles per width using linear planks. Normal room installation using standard tiles. Small or narrow areas 3 tiles per width using standard tiles Light fittings: Because of special tile edge standard light fittings cannot be used for system S 9a. There must be taken special light fittings which are suitable for system S 9a. Fitting types and dimensions: Type: OWA-Lex S 9 OWA-Terra S 9 OWA-Opta S 9 + Mountingset Sizes: 600 x 600 mm 6 x 6 mm 300 x 00 mm For details of radience, installation and fire protection see OWA leaflet No The illustrated examples are not standard light fittings. Extended delivery periods must therefore be anticipated. If any fixture necessitates the cutting of main tee No. the two cut ends must be supported by hangers.

4 System S 9a Material Quantity per m (Standard sizes) Suspended method: No. Description 600 x x x x 0 00 x x 0 /0 Hanger 0. pce 0. pce 0. pce 0. pce 0. pce 0. pce 0 Main runner 0.8 m 0.8 m 0.8 m 0.8 m 0.8 m 0.8 m Connector 0. pce 0. pce 0. pce 0. pce 0. pce 0. pce 63 Stepped Z-Section.66 m.6 m 3.33 m 3.33 m. m. m 6 Z-Connector 0.6 pce 0. pce. pcs. pcs 0.8 pce 0.8 pce 60 Wire clip. pcs.6 pcs.3 pcs.3 pcs.0 pcs.0 pcs L-Section.6 pcs. pcs.6 pcs.3 pcs. pcs.0 pcs 0 G Wall angle Dependent on room size and shape Direct fixing: 6 Tight-up clip. pcs.6 pcs.3 pcs.3 pcs.0 pcs.0 pcs 9 Wood srews. pcs.6 pcs.3 pcs.3 pcs.0 pcs.0 pcs 63 Stepped Z-Section.66 m.6 m 3.33 m 3.33 m. m. m 6 Z-Connector 0.6 pce 0. pce. pcs. pcs 0.8 pce 0.8 pce L-Section.6 pcs. pcs.6 pcs.3 pcs. pcs.0 pcs 0 G Wall angle Dependent on room size and shape Weight (suspended method): Suspension system, approx.. kg/m. kg/m 3.0 kg/m 3.0 kg/m. kg/m. kg/m Tiles 0 mm, approx. 6.0 kg/m 6.0 kg/m 6.0 kg/m 6.0 kg/m 6.0 kg/m 6.0 kg/m System description: Concealed demountable OWAcoustic -System S 9a (Suspended) Quality statement: OWAcoustic -Mineral wool panels are free from harmful materials such as asbestos and formaldehyde. A statement from the German institute for Building Technology is available. The mineral wool used in these panels is biodegradable. The criterions of the zero-ranking as a carcinogenic material in the chemical prohibition ordinance ( appendix section 3 bio-persistent fibres) is complied with and therefore carries the RAL-Seal of mineral wool guarantees. Installation should be in accordance with OWA-System leaflet S 9a and OWA-Installation guide 80. Component list: Hanger No. /0, galv. Main runner No. 0, galv. Connector No., galv. Wire clip No. 60, galv. Stepped Z-Section No. 63, galv. Z-Connector No. 6, galv. L-Section No., galv. Wall angle No. 0 G, white Concealed demountable OWAcoustic -System S 9a (Direct fixing) Quality statement: OWAcoustic -Mineral wool panels are free from harmful materials such as asbestos and formaldehyde. A statement from the German institute for Building Technology is available. The mineral wool used in these panels is biodegradable. The criterions of the zero-ranking as a carcinogenic material in the chemical prohibition ordinance ( appendix section 3 bio-persistent fibre) is complied with and therefore carries the RAL-Seal of mineral wool guarantees. Installation should be in accordance with OWA-System leaflet S 9a and OWA-Installation guide 80. Component list: Tight-up clips No. 6, galv. Wood screw No. 9, galv. Stepped Z-Section No. 63, galv. Z-Connector No. 6, galv. L-Section No., galv. Wall angle No. 0 G, white

5 OWAcoustic System S 9b

6 System S 9b Technical Data Product line: OWAcoustic Dimensions: 600 x 600 mm 6 x 6 mm every nd tile directly demountable Other sizes available on request, subject to minimum quantities and surcharges. Thickness: approx. 0 mm Building class: A-s,d0 to EN 30- Edge details: Long edges Short edges 0 Metal Suspension: All metal components listed are galvanized steel or white painted. For further details and colours see -Price list. 6 3 Hanger No. /.../, max. centres 00 mm Main tee No., max. centres 6 mm 3 L-Section No. ( per tile) Cross tee No. 6, max. centres 00 mm Wall angle No. 0 G 6 Tile width Tile length Suspension depth: Minimum suspension depth approx. 30 mm Cross section: Fire protection: See OWA brochure No Longitudinal section: 3 00 these two tile rows are demountable Hints: Direct tile removal is between the main runners No. (to accommodate the splice junction of the main tees it will be necessary to notch out the back of the tile edge). The tiles next to the cross tees No. 6 are not demountable. To prevent any undue stress (especially torsion) on the ceiling system, hangers must be installed vertically. Tile removal: Tiles can be demounted by lifting the free side of the tile and moving it sideways until the opposite edge of the tile has cleared the stepped Zed.

7 OWAcoustic System S 9b Wall perimeter details: Tiles with their width on the perimeter wall angle or other sections cannot be removed directly downward. In small areas at least 3 rows of tiles per installation are required so that the first full tile from the wall and than the wall tile can be removed (see installation example). For other examples of perimeter wall details and installation see OWA-Installation guide 80. Tile removal: Demounting the tiles is quick and simple providing that main tees are installed in accordance with the system plan as, after removing the clear tiles the other tiles can be slid along the grid. Installation: directly demountable tiles Installation example: Normal rooms/standard tiles installed Lighting on request: Because of special tile edge standard light fittings cannot be used for system S 9b. There must be taken special light fittings which are suitable for system S 9b. Fitting types and dimensions: Type: OWA-Lex S 9 OWA-Terra S 9 OWA-Opta S 9 + Mountingset Sizes: 600 x 0600 mm 6 x 06 mm With other tile sizes we recommend the use of downlights or strip lighting. For details of installation, radience and fire protection see OWA brochure No Small or narrow areas Main tees must be installed lengthwise. The illustrated examples are not standard light fittings. Extended delivery periods must therefore be anticipated. If any fixture necessitates the cutting of main tee No. the two cut ends must be supported by hangers.

8 OWAcoustic System S 9b Material Quantity per m (Standard sizes): No. Description 600 x x 6 /.../ Hanger.3 pcs.0 pcs Main tee.66 m.6 m 6 Cross tee 0.69 pcs 0.6 pcs L-Section. pcs 3.8 pcs 0 G Wall angle Dependent on room size and shape Weight: Suspension system, approx.. kg/m. kg/m Tiles 0 mm, approx. 6.0 kg/m 6.0 kg/m System description: Concealed demountable OWAcoustic System S 9b Quality statement: OWAcoustic Mineral wool panels are free from harmful materials such as asbestos and formaldehyde. A statement from the German institute for Building Technology is available. The mineral wool used in these panels is biodegradable. The criterions of the zero-ranking as a carcinogenic material in the chemical prohibition ordinance ( appendix section 3 bio-persistent fibres) is complied with and therefore carries the RAL-Seal of mineral wool guarantees. Installation should be in accordance with OWA System leaflet S 9b and OWA Installation guide 80. Component list: Hanger No. /.../ Main tee No., white Cross tee No. 6 L-Section No., galv. Wall angle No. 0 G, white Guarantee and liability All system relevant data and statements correspond to the current technology. they assume the exclusive application of OWA products and system components, the interdependent behaviour of which is confirmed by internal and external testing. When they are used in combination with non OWA products and system components any warranties or guarantees are invalidated and liability will not be accepted. OWA reserves the right to make any techniccal alterations to improve either product or system development. All goods are supplied in accordance with our general sale and delivery terms. Odenwald Odenwald Faserplattenwerk Faserplattenwerk GmbH GmbH Dr.-F.-A.-Freundt-Straße Freundt-Straße Amorbach Amorbach Telefon: Telefon: Telefax: Telefax: info@owa.de OWA (UK) Ltd. Unit 0, Perth Trading Estate Perth Avenue, Slough SL XX Tel.: 0 3 / 89 Fax: 0 3 / sales@owa-ceilings.co.uk Brochure S 9a/b E 000 Druckschrift 86,