Marbres, onyx, granites, travertines, limestones, all natural stones kinds reinforced by aluminum honeycomb, composites substrates or glass sheets.

Transcription

1

2 Marbres, onyx, granites, travertines, limestones, all natural stones kinds reinforced by aluminum honeycomb, composites substrates or glass sheets. The giant Ultra Lite Natural Stone Panels have 5 mm NATURAL STONE REINFORCED BY patented ALUMINUM HONEYCOMB, thickness goes from 10 mm to 60 mm. Weight is only 15 kg/m2, density is less than water. These Ultra Lite Natural Stone Panels are very resistant and durable; they are ideal for large projects because of economic production costs, personalizing, easy handling and erecting. Used for Facades and Architectural Systems, Interiors, Design, Furniture, Doors, Elevator Cabs, bathrooms, Renovations, Shops, Lobbies, Yachts and Aircrafts, etc. CSI is the technical world leader for manufacturing Ultra Lite Panels made of stone and other mineral surfaces. We have had numerous successes throughout the world during our twenty-plus years of experience, thanks to our very effective project-study team, who are at the cutting edge of all new technology in our field.

3 We insure the quality and the competitiveness of our products because of we also designed innovative machines to produce it, all the technology has been developed by ourselves. ULS Panels allies the beauty of stone to the strength of metal through very high-level safe chemistry. Endowed with exceptional mechanical advantages, ULS Panels are very large in format, up to 1500 mm x 3600 mm, while remaining very light: approximately 15 kg/m2. ULS Panels are calibrated at the factory; our panel s great diversity of finishing is identical to those of massive natural stones: high-gloss polishing, impregnation, honed, split-faced, bushhammered, tooled, chiseled, waterjet finishing, flamed, and so forth. You also have an almost infinite choice of stone: more than 6000 types have been catalogued, including many Granites, Marbles, Quartzes, Limestone, Sandstone, Onyxes, Travertines, to name just a few. Once assembled, our panels are cut out according to detailed shop drawings, and they can be pre-assembled as ordered : Columns, Pillars, Arches, Cornices, Pedestals, Railings and Parapets, Doors, Blinders, Ceilings, curved shapes and any other architectural details.

4 Worldwide applications Less is More Ludwig Mies van der Rohe Exterior - Facades - Towers - Bridges Renovation - Architectural enhancement Retail - Commercial - Offices - Residential Floorings - Ceilings - Walls - Bathrooms Kitchen & Vanity top Urban Design - Landscaping Interior Design - Yachting Elevators - Furniture - Doors - Blinders Composite structures

5

6 Technical Data Natural Stone Facing Impervious Fiber-Reinforced Expoxy Skin Aluminum Honeycomb High-Strength Fiber-Reinforced Epoxy Skin

7 The following data are for standard panels having 4,5 mm thickness of Natural Stone onto 19,7 mm thickness of corrosion resistant Aluminum Honeycomb Honeycomb specifications: AL double phosphoric - chromate treatment, foil = 70µ, cell = 3/8 Double type E grid of 400 gr/m² epoxy bonded Size: 1250 * 2500 Tolerance = +/- 0,5 mm 6000 tested natural stones Pressure strength DIN DIN > 5 N/mm² Flatwise Tensile strength DIN DIN Before aging 3,5 N/mm² After aging 3,0 N/mm² Windload 4 fixing Reaction per fixing 10,31 Kn 6 fixing Reaction per fixing 9,60 Kn Safety coefficient = 6 Flexural strength on 4 points DIN Set at 80/300 mm, 100 mm width Before aging 7900 N After aging 7700 N Shear strength ribbon 2,2 N/mm² cross ribbon 1,5 N/mm² Elasticity Module ribbon 440 N/mm² cross ribbon 295 N/mm² Heat transfer coefficient K= 1,5 W/m C Thermal expansion (linear) α=10*10-6/ C between 0 C and 100 C Acoustical Insulation - 28 db between 100 Hz and 3200 Hz Fire Evaluation DIN 4102 A2 AFNOR M1 NFPA A UBC 1 ASTM E minutes Resisted ASTM E-84 all criteria Punching resistance ρh 309 N/mm² Hertz test Density with 4 mm mineral veneer d = 10 kg/m² Vapor barrier DIN µ = Smoke Developed DIN 4102 Part 1 Class A2 approved Biological facts Free from ASBESTOS Free form dangerous materials as: Formaldehydes, etc. Safety warning: not required, sawing or holing need sufficient aeration Bond strength PV CSTB > 2,65 Mpa Impact strength (power) PV CSTB > 414,76 Kgf.m/s 50 times greater Inserts Pull-out strength T-Nut Threaded Inserts M6 sprayed with PTFE (non adherent surface). Average pull-out resistance is 5,4 Kn This value is equal to 85% of not limited adherence. January Characteristics are not contractual document. Data are approximate and they can change without notification.

8 Montréal New York London Monaco Lisbon Seoul CSI Canada Projects Inc. 8134, Boul. Décarie, Suite 125 (Carré Union) Montréal, QC H4P 2S8 Phone Fax contact@csi-institute.com