Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description

Transcription

1 SCTIN DIRCTRY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. V350-SW-1

2 STANDARD BLCK FRAM BRAND SUMMARY Pella 350 Series Sliding Windows feature an extruded, rigid PVC (polyvinyl chloride) frame and sash with heatfused mitered corners for a fully welded corner assembly. The SmoothSeam welded corners on the interior of the sash are virtually invisible. Sliding Windows meet industry standards for water infiltration and wind resistance and meet NRGY STAR guidelines with dual-pane or triple-pane insulated glass. Standard performance window sash are available with optional foam insulation for increased thermal performance. STANDARD NAIL FIN BLCK FRAM DSIGN 4-1/2" Block or 3-1/4" Block Pocket Install 3-1/4" Block Pocket Install Frame allows a perfect fit into a 3-1/4" pocket when installed into an existing Double-Hung or Single-Hung wood frame from the interior. 4-1/2" block frame can be used in new construction block or concrete walls. They may also be used in replacement of old aluminum or steel frame windows or pocket replacement into wood frames from the exterior. The block frames include interior and exterior accessory grooves. Custom sizes are available in 1/8" increments for a perfect fit. NAIL FIN with J-CHANNL 4-1/2" Block Frame 3-1/4" Block Pocket Install STANDARD BLCK FRAM STANDARD NAIL FIN FRAM DSIGN BLCK FRAM With or Without Integrated J-Channel Continuous fin with welded corners adds a protective weather barrier and allows for hassle-free installation. The standard 4-1/2" frame depth includes interior and exterior accessory grooves. Nailing fin has a 1-7/16" setback from exterior face of window frame. Custom sizes are available in 1/8" increments for a perfect fit. 4-9/16" and 6-9/16" factory applied primed or clear jamb extensions are available. STANDARD NAIL FIN STANDARD NAIL FIN DUBL-WALL FLUSH FLANG Replacement Frame Design The flush flange frame allows for easy replacement of old aluminum or steel frame PCKT RPLACMNT windows without removing the existing frame head PCKT or jambs RPLACMNT typically used with stucco exteriors in southwest arid DUBL climates. WALL The frame depth is 4-1/2" FLUSH (overall FLANG wall depth of 4-1/16") includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. INTGRAL 5/8" FLANG FRAM The integral 5/8" flange frame can be used in new construction BLCK block FRAM or concrete with walls. Commonly used 5/8" in INTGRAL Florida and FLANG often referred BLCK FRAM with to 5/8" as "Florida INTGRAL Flange" FLANG frame. The frame depth is 4-1/2" (overall wall depth of 3-7/8") includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. With J-Channel Without J-Channel V350-SW-2

3 PRDUCT SLCTIN GUID Size and Data Sound Transmission Class SIZS Standard Sizes Special Sizes Available Built on 1/8" Increments FRAMS Nail Fin nly Nail Fin with J-Channel 4-1/2" Block S 3-1/4" Block Pocket Install / Replacement S Double-Wall Flush Flange Integral 5/8" Flange PRFRMANC 1 Standard S Meets or xceeds AAMA/WDMA Ratings LC-PG40 Hallmark Certified Air Infiltration 2 (cfm / ft 2 of 1.57 psf wind pressure.) Design Pressure Water Penetration Resistance ther Criteria psf 6.06 psf Forced ntry Resistance (Minimum Security Grade) 3 10 perating Force (lb) Initiate Motion / Maintain Motion (of Hallmark tested size and glazing) 4 50 / 35 Sound Transmission Class and utdoor-indoor Transmission Class Glazing System Frame Size Tested 5 verall Glazing Thickness xterior Thickness Interior Thickness Third Pane Thickness STC Rating ITC Rating - DUAL PAN INSULATING GLASS 60" x 48" 11/16" 3mm 3mm " x 48" 11/16" 3mm 5mm TRIPL-PAN INSULATING GLASS 60" x 48" 1-1/4" 3mm 3mm 3mm S = Standard; = ptional (1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values. with additional options may not be the same as Standard and Special size units. Please contact your local Pella representative for complete information. (2) Published performance Data for air infiltration is determined by testing a minimum of four (4) products of NFRC model size. Testing is conducted in accordance with ASTM 283. Air infiltration ratings for products will differ by size. The performance data does not apply to combination assemblies unless notes. Actual product performance may vary for a number of reasons including installation and product care. (3) The higher the level, the greater the product's ability to resist forced entry. (4) Glazing configurations may result in higher operational forces. (5) ASTM 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. The presence of low- or argon have negligible effect on sound attenuation characteristics. V350-SW-3

4 PRDUCT SLCTIN GUID Features and ptions GLAZING (INSULATING GLASS) Glazing Type Dual-pane insulating glass Triple-pane insulating glass Insulated ptions / Low- Types Advanced Low- NaturalSun Low- SunDefense Low- 1 Gray Low- 1 Bronze-tinted Advanced Low- 1 Additional Glazing ptions Annealed glass Tempered glass bscure glass 2 Noise reduction glass (STC 3mm / 5mm combination) 1 Gas Fill / High Altitude Argon High altitude High altitude with argon 1 SASH Foam Insulation INTRIR / XTRIR CLR White Interior/White xterior Almond Interior/Almond xterior White Interior/Brown xterior White Interior/Fossil xterior White Interior/Black xterior White Interior/Brick Red xterior White Interior/Hartford Green xterior White Interior/Morning Sky Gray xterior White Interior/Poplar White xterior White Interior/Portobello xterior White Interior/Tan xterior HARDWAR Color matched hardware Bright Brass, Satin Nickel or il-rubbed Bronze Sash Locks Standard Cam Lock Autolock SCRNS Conventional black fiberglass screens - flat InView screens S S S S S S S S GRILLS Grilles-Between-the- 3/4" Contour 1" Contour Grille Patterns: Traditional, Prairie, Top Row, Custom - qually Divided Simulated-Divided-Light Grilles 1 (without spacer) 7/8" contour profile Grille Patterns: Traditional, Prairie, Top Row, Custom - qually Divided S = Standard; = ptional (1) Not available with triple-pane glazing. (2) Contact your local Pella sales representative for current offering. V350-SW-4

5 GLAZING PRFRMANC - TTAL UNIT 11/16" Insulating with 3mm Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S /16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N VNT WITH FAM INSRTS 11/16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-5

6 GLAZING PRFRMANC - TTAL UNIT 11/16" Insulating with 3mm / 5mm Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S /16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N VNT WITH FAM INSRTS 11/16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-6

7 GLAZING PRFRMANC - TTAL UNIT 1" Insulating with 5mm Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S " Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N VNT WITH FAM INSRTS 1" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-7

8 GLAZING PRFRMANC - TTAL UNIT Triple-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) xt. Mid. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S /4" Advanced Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" Advanced Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N VNT WITH FAM INSRTS 1-1/4" Advanced Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" Advanced Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-8

9 GLAZING PRFRMANC - TTAL UNIT 11/16" Insulating Tinted Glazing Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone TINTD GLAZING N NC SC S /16" Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N TINTD GLAZING WITH FAM INSRTS 11/16" Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-9

10 GLAZING PRFRMANC - TTAL UNIT 1" Insulating Tinted Glazing Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone TINTD GLAZING N NC SC S " Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N TINTD GLAZING WITH FAM INSRTS 1" Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-10

11 GLAZING PRFRMANC - TTAL UNIT 3-1/4" Block Pocket Replacement 11/16" Insulating with 3mm Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S /16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N VNT WITH FAM INSRTS 11/16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-11

12 GLAZING PRFRMANC - TTAL UNIT 3-1/4" Block Pocket Replacement 11/16" Insulating with 3mm / 5mm Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S /16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N VNT WITH FAM INSRTS 11/16" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-12

13 GLAZING PRFRMANC - TTAL UNIT 3-1/4" Block Pocket Replacement 1" Insulating with 5mm Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S " Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N VNT WITH FAM INSRTS 1" Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " NaturalSun Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " SunDefense Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-13

14 GLAZING PRFRMANC - TTAL UNIT 3-1/4" Block Pocket Replacement Triple-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) xt. Mid. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone VNT N NC SC S /4" Advanced Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" Advanced Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N VNT WITH FAM INSRTS 1-1/4" Advanced Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" Advanced Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N /4" NaturalSun Low- Triple-pane IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-14

15 GLAZING PRFRMANC - TTAL UNIT 3-1/4" Block Pocket Replacement 11/16" Insulating Tinted Glazing Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone TINTD GLAZING N NC SC S /16" Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N TINTD GLAZING WITH FAM INSRTS 11/16" Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N /16" Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-15

16 GLAZING PRFRMANC - TTAL UNIT 3-1/4" Block Pocket Replacement 1" Insulating Tinted Glazing Thickness Type of Glazing NFRC Certified Product # (mm) xt. Int. Gap Fill U-Factor Values 1 SHGC VLT CR Shaded Areas Meet NRGY STAR Criteria in Zones Shown U. S. Canada 2 Zone R Zone TINTD GLAZING N NC SC S " Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N TINTD GLAZING WITH FAM INSRTS 1" Bronze Advanced Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Bronze Advanced Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N air with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N " Gray Low- IG PL-N argon with 3/4" or 1" grilles-between-the-glass PL-N with 7/8" Simulated Divided Light grilles PL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance R = Canadian nergy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. NRGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated NRGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product section for more detailed information or visit for nergy Star guidelines. V350-SW-16

17 GRILL TYPS Grille Profiles GRILLS-BTWN-TH-GLASS Grilles-Between-the- SIMULATD-DIVIDD-LIGHT Simulated Divided Light GRILLS 3/4" 1" 3/4" 1" 7/8" 3/4" Contour GBG 1" Contour GBG 3/4" Contour GBG 1" Contour GBG 7/8" SDL Grille Patterns PRAIRI LIT PATTRNS Prairie - Approximately 4" from edge of sash to center of bar. - Minimum actual glass is 13". 6-Lite Prairie 9-Lite Prairie THR AVAILABL PATTRNS Traditional - Specify number of lites. - Grille Bars (Grilles) must be equally divided on visible glass. - Minimum lite size = 6". Traditional Top Row Top Row - Top Row dimension must be 1/2 actual glass. Custom qually Divided For traditional patterns, see size tables. V350-SW-17

18 SPCIAL SIZ FRAM DIMNSINS Miscellaneous Formulas MINIMUM MAXIMUM X R X UNITS 21-1/2"W x 11-1/2"H (546 x 292) 76"W x 72"H (1 828 x ) XX UNITS 47-1/2"W x 11-1/2"H (1 207 x 292) 114"W x 72"H (2 896 x ) General Notes: X/X Units: Rough pening = Frame Dimension + 1/2" Maximum Frame Height Frame Width x 1.75 Bronze glass is limited to 22 Ft 2 (glass size). If glass width / height ratio is > 5:1, then unit must be tempered. XX Units: Rough pening = Frame Dimension + 1/2" Sash split options are 1/4 width and 1/3 width of frame 1/4 Vent XX Units: Max frame height frame width X /3 Vent XX Units: Max frame height frame width X 1.167) Bronze glass is limited to 22 Ft 2 (glass size). If glass width / height ratio is > 5:1, then unit must be tempered. Miscellaneous Formulas QUAL VNT (X AND X) QUARTR VNT (XX) THIRD VNT (XX) ACTUAL GLASS VISIBL GLASS AGW = (FW ) /2 AGW = (FW ) /4 AGW = (FW ) /3 AGH = FH VGW = AGW VGH = AGH PNING 1 CH = FH CLAR CW = (FW ) / 2 CW = (FW ) / 4 CW = (FW ) / 3 KY: AGW = Actual Width AGH = Actual Height FW = Frame Width FH = Frame Height VGW = Visible Width VGH = Visible Height (1) Calculated based on standard hardware. To convert areas to square meters (m 2 ), multiply square feet by V350-SW-18

19 SIZ TABLS Vent-Fixed Units (X) Vent-Fixed Units (X) (610) (597) (762) (749) (914) (902) (1 219) (1 207) (1 524) (1 511) (1 829) (1 816) pening Frame 2' 0" 23 2' 6" 29 3' 0" 35 4' 0" 47 5' 0" 59 6' 0" 71 (457) (445) 1' 6" / / / / / /1-6 (610) (597) 2' 0" / / / / / /2-0 (762) (749) 2' 6" / / / / / / / / / / / / / / / / / / / / / / / / / / /4-6 (1 524) (1 511) 5' 0" 59 (1 372) (1 359) 4' 6" 53 (1 219) (1 207) 4' 0" 47 (914) (902) 3' 0" 35 1 (1 067) (1 054) 3' 6" / / / /5-0 (1 829) (1 816) 6' 0" / / /6-0 gress Notes: Check all applicable local codes for emergency egress requirements. = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. 1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Not to scale. X units shown also available as X V350-SW-19

20 SIZ TABLS Vent-Fixed-Vent Units (XX) Third Vent Units Vent-Fixed-Vent Units (XX) (1 829) (1 816) (1 829) (2 121) (2 438) (2 426) (2 743) (2 731) pening Frame 6' 0" 71 7' 0" 83 8' 0" 95 9' 0" 107 (457) (445) 1' 6" / / / /1-6 (610) (597) 2' 0" 6-0/ / / / / / / / / / / / / / / / / / / / / / / /4-6 (1 524) (1 511) 5' 0" 59 (1 372) (1 359) 4' 6" 53 (1 219) (1 207) 23 4' 0" 47 (762) (749) 2' 6" 29 1 (914) (902) 3' 0" 35 (1 067) (1 054) 3' 6" / / / /5-0 gress Notes: Check all applicable local codes for emergency egress requirements. = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. 1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Not to scale. V350-SW-20

21 SIZ TABLS Vent-Fixed-Vent Units (XX) Quarter Vent Units Vent-Fixed-Vent Units (XX) (1 829) (1 816) (1 829) (2 121) (2 438) (2 426) (2 743) (2 731) pening Frame 6' 0" 71 7' 0" 83 8' 0" 95 9' 0" 107 (457) (445) 1' 6" / / / /1-6 (610) (597) 6-0/ / / / / / / / / / / / / / / / / / / / / / / /4-6 (1 524) (1 511) 5' 0" 59 (1 372) (1 359) 2' 0" 4' 6" 53 (1 219) (1 207) 4' 0" 47 (762) (749) 2' 6" (914) (902) 3' 0" 35 1 (1 067) (1 054) 3' 6" / / / /5-0 gress Notes: Check all applicable local codes for emergency egress requirements. = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. 1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Not to Scale V350-SW-21