Curriculum Vitae; Dr Ahmed Hassan Yousef CURRICULUM VITAE

Transcription

1 CURRICULUM VITAE 1) Personal Information Name : Dr. Ahmed Hassan Yousef Aly Date of Birth : July 08, 1969 Citizenship : Egyptian Occupation : Professor of Steel Structures and Bridges, Structural Engineering Department, Faculty of Engineering, Ain Shams University (ASU), Cairo, Egypt. Work Address : 1 El-Sarayat Street, Abbasia, Cairo, Egypt, Faculty of Engineering, Ain Shams University, Mobile : ahmed_aly@eng.asu.edu.eg, a_h_yousef69@yahoo.com, ahyousef69@gmail.com 2) Academic Background : Doctor of Philosophy (Civil Engineering), Degree awarded: September 2002, Polytechnic University of Valencia, Valencia, Spain : Master of Science in Structural Engineering, Degree awarded: October 1995, : Bachelor of Science in Structural Engineering Rank; Distinction with Honor Degree, June 1991, 3) Employment History 2014 present: Position: Professor of Steel Structures and Bridges, Structural Engineering Department, Faculty of Engineering, Ain Shams University : Position: Head of control Exams for third year civil, Faculty of Engineering, Ain Shams University : Position: Associate Professor, Structural Engineering Department, Faculty of Engineering, Ain Shams University : Position: Assistant Professor, Structural Engineering Department, Faculty of Engineering, Ain Shams University : Position: Post Doctoral Fellowship, Polytechnic University of Valencia, Spain : Position: Teaching Assistant, Structural Engineering Department, Faculty of Engineering, Ain Shams University. 4) Teaching Experience 4.1 Faculty of Engineering, Ain Shams University (From 2002 till now): Undergraduate Courses: - Design of Steel Buildings, 3 rd year Civil and 2 nd year Architectural - Design of Steel Bridges, 4 th year Civil - Design of Plated Structures, 4 th year Civil - Graduate Steel Projects, 4 th year Civil 1/6

2 4.1.2 Post-graduate Courses: - Design of Cold Formed Steel Sections, 2 nd year diploma (between 2003 and 2009) - Advanced design of steel bridges M.Sc. and Ph.D. program (From 2009 till now) - Design of offshore structures, M.Sc. and Ph.D. program (From 2011 till 2014) 4.2 Faculty of Engineering, Ain Shams University, Credit Hours Engineering Programs, Building Engineering Program (BLDG): - Structural Design II- BLDG362, for pre-junior students (From Fall 2008 till now) - Advanced Topics in Steel Structures Design- BLDG493, for senior students (From Fall 2010 till now) - Building Engineering Design Project-BLDG495, for senior students (From Fall 2010 till now) - Senior Seminar-BLDG596, for senior students (From Spring 2010 till now) 4.3 High Institute of Engineering, El-Shorouk Academy: - Design of Steel Bridges, 4 th year Civil, from 2004 till now (except academic year 2008/2009) - Design of Steel Buildings, 2 nd year Arch, for academic year 2006/ and 2008/ High Institute of Engineering, Science and Culture City, at 6 October city: - Design of Steel Buildings, 3 rd year Civil, Const. & Build. Dept, for academic year 2006/ 5) Engineering Experience 2006-Now: Senior of Structural Engineer at Technical Consultant Bureau (TCB), Cairo Egypt. The job responsibilities included supervising and reviewing of different steel and concrete structural design, Example: Libya (2006), Vitnam (), Ramlia Line 1 and 2, El- Minya (2008) and Sinai (2) in Egypt (2006) and (), Syria (2008), Qatar (2008), etc. Also, the following are some of the projects that were designed or reviewed from 2009 till present: Extension of El Suez 500 KV Gantry, Ministry of Electricity and Energy, ALSTOM,, Design of Steel Towers Gantries, one gantry of height 25 ms and two gantries of height 35 ms. Ramliya cement plant, Arabian Cement Company, Grey cement factory of production capacity of 6000 ton/day, Design of steel structure works for coal mill department. Khukh Tsav Cement Plant in Mangolia (3000 TPD), 2012, Structural designs of department 331-Exhaust Gas conditioning as sub-consultant to the Danish firm MTHjgaard. Modernization of Tura Workshops 2012, Egyptian Company for Metro. Design and modernize about seven steel workshops. Angel dry Yeast Plant, Beni Swief, Egypt, 2012, Design of Arch., steel structure works, civil works (R.C works), Roads works, industrial drainage networks and indoor plumbing and electrical works. Arab National Cement Company 2011, Al-Minya Cement Plant (5500 TPD), Egypt. Design of more than 80% of steel structures of the whole line product. Modern Cement Plant in Qatrana-Jordan (3000 TPD), 2010, Structural designs of Exhaust Gas conditioning (Dept. 331) as sub-consultant to the Danish firm MTHjgaard. 2/6

3 Djelfa cement plant, Algeria 2010, Gray cement factory of two production lines of capacity (2X4500 TPD). Design of more than 80% of steel structures of the whole line product. Building Material Industries Company 2010, ASUIT Cement Production Plant (1.5 Million Ton Annually), Egypt. The job responsibilities included supervising and reviewing of structural design drawings and calculation sheets of all steel departments. El NAHDHA Cement Company 2009, Qena (5500 TPD), Egypt. Supervise and review of structural design drawings and calculation sheets of all steel departments. WADI EL NILE Cement Company 2009, Line 1, Beni Suef (6000 TPD), Egypt : Senior of Structural Engineer at Mohmoud El-Banna Consultant office, Cairo Egypt. The job responsibilities included supervising and reviewing of different steel and concrete structural design as well as reviewing of the structural design of different steel and reinforced concrete projects for the Egyptian Insurance companies : Director of AMA Group center for Consulting Engineering: Supervision and design of steel and concrete projects : Coordinator of the consulting group for the construction of the New Exhibition Hall in the Cairo International Conference Center. Client is "Cairo International Conference Center", Consultant is "Consulting and research Center for Steel Buildings and Bridges, Faculty of Engineering, Ain Shams University" and Contractor is "Arab Contractor Company". The job responsibilities included; Following up the time schedule of the project and making periodic reports about the work progress. Preparing the conference notes in the site that will be discussed between the consulting group, the Contractor and the owner. Following up the preparation of the workshop drawings to accelerate the project schedule and notify the owner about the work progress in the site by preparing monthly reports : Part-time Structural Engineer at Taalat Consultant office, Cairo, Egypt. The job responsibilities included: Design of industrial steel structures, reinforced concrete structures, and various villas in Elkatamya city, and preparing work shop drawing for steel structures : Part-time Structural Engineer at K. Hassan Consultant office, Cairo, Egypt. The job responsibilities included: Design of reinforced concrete and industrial steel structures, preparing detailed drawing construction, and reviewing of the structural design of steel and reinforced concrete structures for the Egyptian Insurance companies : Part-time Structural Engineer at Shaker El-Behery Consultant office, Cairo, Egypt. The job responsibilities included Design of reinforced concrete projects: Hospital building, various office buildings and industrial structures. 6) Master and Doctoral Thesis Supervisions: M.Sc., (2006), Behavior of Sheathed Cold-Formed Steel Wall Studs, Heba Tarek Mohamed Ezzat Elnabarawy. M.Sc., (2008), Torsional Flexural Buckling Loads of Compressed Members with Un-symmetric Steel Sections, Mona Mahmoud Fawzy Abd El Badee. M.Sc., (2009), Lateral Buckling of C and Z Members in Bending, Tamer Hanafy Sayed. M.Sc., (2010), Behavior of Gypsum Sheathed Beam-Column Steel Wall Studs, Amal Said Helmy Soliman Mohamed. 3/6

4 M.Sc., (2011), Behaviour and Strengthening of Steel Hollow Section Connections Subjected to Axial and Eccentric Loading, Mohammed Saeed Ahmed Hassaneen Mohammed. M.Sc., (2012), Behavior of Bolted End-Plate Moment Connections, Mohamed Mostafa Mohamed Ibrahim. Ph.D., (), Moment Connections of Beams and Concrete-Filled Steel Columns, Mona Mahmoud Fawzy Abd El Badee. M.Sc., (2008), Behavior of Bolted End-Plate Moment Connections with Hollow Steel Elements, Omar Farouk Fathy Tawfeek. M.Sc., (2010), Behaviour and Analysis of Monorail Horizontally Curved Steel Beams, Assmaa Magdy Abdelnour Aabed. M.Sc., (2012), Behavior of Composite Box-Girder Bridges during Construction Using Permanent Metal Deck Forms, Mohamed Gamal Ahmed AbdolWahab. 7) Publication List # Paper Title Conferences and Scientific Bulletins Year Ultimate Strength of Hollow Section Tubular K-Joint Subject To Axial Load Investigation of In-plane Moment Connections of I-Beams To Square Concrete-Filled Steel Tube Columns under Gravity Loads Effect of Steel Deck Forms on the Behavior of Trapezoidal Box Girder Bridges during Construction Stiffener Configurations of Beam To Concrete- Filled Steel Tube Column Connections Code Comparison for Traffic Loads on Roadway Bridges in Egypt Behavior of I-beam bolted extended end-plate moment connections Strengthening of Tubular T-Joints Subjected To Axial and Eccentric Loading Moment connections of steel I-beams and square concrete-filled steel tube columns Ultimate strength of uniplanar circular hollow section joints subjected to axial and inplane bending moment Behavior of welded single angles subjected to compressive forces Influence of Corrugated Sheets on the Strength of Cold-Formed Steel Beams Behavior of Singly Symmetric Sections Subjected To Axial Compressive Force in Truss Bridges Fourteenth International Conference on Housing and Building National Research Center, Cairo, Egypt, Elsevier publisher, Engineering Research Journal, Faculty of Engineering, Mataria, Helwan University. Techno Press, Steel and Composite Structures, Vol. 17. No. 1, Journal of Al Azhar University Engineering Sector (JAUES), Accepted for publication Ain Shams Engineering Journal (ASEJ), Civil Engineering, Elsevier publisher, 4, Journal of Al Azhar University Engineering Sector JAUES, Vol. 8, No.27, April, Civil Engineering Research Magazine, Al- Azhar University, Vol. 35, No.2, Thirteenth International Colloquium on Thirteenth International Colloquium on Ain Shams Journal of Civil Engineering (ASJCE), Faculty of Engineering, Ain Shams University, Vol. 44, No. 1 Scientific Bulletin, Faculty of Engineering, Ain Shams University 20-22, 2015 February 2014 June 2014 July 2014 November April April 27-29, , 2009 March 2009 March /6

5 Ultimate Strength Of Eccentrically Braced Steel Columns Of Built-Up I-Sections Behavior Of Sheathed Cold-Formed Steel Wall Studs Effect of Axial Tension/ Compression And Shear Forces on Plastic Moment of Beam- Columns Made of Compact Ι-Sections Distortional And Local Buckling Of Cold- Formed C And Z-Sections Flexural Torsional Buckling Of Steel T- Sections Subjected To Axial Compressive Force Behavior of Gypsum Sheathed Beam-Column Steel Wall Studs Effect Of Vertical Bracing Eccentricity On The Out-Of-Plane Buckling Of H-Shape Steel Columns A Comparative Study On Two Different Positions Of Cold-Formed Steel Channels Under Minor Axis Moment Behavior Of Gypsum Sheathed Cold-Formed Steel Wall Studs Analysis Of Cable Network By The Minimum Potential Energy Method 23 Form-Finding For Cable Network Behavior Of Composite Box-Girders During Constructions Effects Of Different Bracing Systems On The Distortional And Warping Stresses In Composite Box-Girders Al-Azhar, Civil Engineering Research Magazine [CERM], April 2008 Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 42, No. 4, pp Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 42, No. 4, pp Twelfth International Colloquium on Twelfth International Colloquium on Twelfth International Colloquium on Eleventh International Colloquium on Eleventh International Colloquium on Eleventh International Colloquium on Textile Composites and Inflatable Structures CIMNE, Barcelona, Spain. Textile Composites and Inflatable Structures CIMNE, Barcelona, Spain. Al-Azhar, Civil Engineering Research Magazine [CERM] Vol.18 No. (6), Pages Al-Azhar, Civil Engineering Research Magazine [CERM] Vol.18 No. (6), Pages March , , , May May May June 2003 June 2003 October 1996 October 1996 b- Reference Books (authored or edited) # Book Title (LECTURAL NOTES) Authored/Edited Publication Year 1 STRUCTURAL STEEL DESIGN Authored 2 3 DESIGN OF STEEL BRIDGES Part II: Design of Railway Truss Girder Bridges, Part III: Introduction to the Analysis of Beam Grids and Design of Composite Plate Girder Bridges. DESIGN OF STEEL BRIDGES Part I: Design of Roadway Plate Girder Bridges Authored Authored February February 2006 September 5/6

6 8) Awards : The Polytechnic University of Valencia Graduate Fellowship : The Spain agency of International Cooperation, Institute of Cooperation with the Arabic world, Scholarship for excellence in academic achievement at the Polytechnic University of Valencia, Valencia, Spain : Graduate Students tuition waiver fellowship from Ain Shams University : The excellence award for undergraduate students, Egyptian government. 9) Computer Skills Programming skills: Engineering Applications: Miscellaneous Software: FORTRAN and BASIC languages Expert in the following Finite Element Packages: COSMOS, ANSYS and SAP2000. Microsoft Word - Microsoft Excel - Microsoft PowerPoint - Auto Cad Drawing Program - Internet Utilities. 10) Reference Professors Prof. Dr. Adel Helmy salem, Professor of steel construction and Bridges, Faculty of Engineering, Prof. Dr. Abdel Rehim Khalil Dessouki Professor of steel construction and Bridges, Faculty of Engineering, Prof. Dr. Gouda Ghanem, Professor of strength of materials, Helwan University, Faculty of Engineering, Cairo, Egypt. Prof. Dr. Osman Mohamed Ramadan, Professor of structured analysis and Mechanics, Faculty of Engineering, Cairo University, Cairo, Egypt. 6/6