Armatec FTS GmbH & Co. KG

Transcription

1 Armatec FTS GmbH & Co. KG Friedrich List Strasse 7 D Kisslegg Fon / Fax / info@armatec-fts.de

2 Armatec FTS in South Africa Mecano Conveyer Systems (Pty) Ltd. Unit 15, Graphite Park, Fabriek Street 2194 Randburg Contact person: Mr. Karl Kocwara Fon:

3 OUR COMPANY ARMATEC FTS GmbH & Co. KG Know-how since 1965 Full service provider for pumps, agitators and other main components Your Partner for manufacturing - handling and commissioning Mid-sized machinery manufacturer with 30 employee Member of the German Professional Biogas Association

4 Our motivation what we are looking for Our objective is to transfer our technology know-how to South Africa. So we are looking for End-users for biogas plants, agriculture or industry, which want to build a new plant or which have an existing one (optimizing, repowering, component exchange ) Engineering companies and General Contractors, which make the design of new sites Sales and Service partner companies for our components in different fields: Biogas Agriculture Industry Waste Water Treatment Chemical and Food Industry in different countries in South-East-Asia In South Africa but also in the neighbouring countries

5 OUR ACHIEVEMENTS All components Made-in-Germany We comply all safety rules, applicable laws and regulations On-site consultation Technical layout of all components conception and planning Products are well-adapted to the chosen site Installation, maintenance and training on site In-house training of partner companies Spare parts and repair management Aftersales service Research and development for high-performance systems Optimization and repowering of biogas sites together with engineering partners from Germany

6 SECTOR SOLUTIONS BIOGAS AGRICULTURE WASTE WATER TREATMENT INDUSTRY

7 OUR PRODUCTS AGITATORS PUMPS ULTRA SONIC SYSTEMS SEPARATORS & CUTTERS

8 LONG-SHAFT AGITATOR Advantages Homogenization at all levels by 2 stirring propellers Upper propeller can be attached at different positions on the tube Corrosion protection with hot-dip galvanizing and tar-epoxy resin coating kw (15 30 hp) ATEX zone II 50 or 60 Hz Up to 5.5 m agitator length side entry or ceiling installation concrete tanks steel / stainless / glass-lined tanks

9 GAS AGITATOR ArmaBlow Up to 30% energy savings No mechanical components in the tank Horizontal and vertical mixing Nearly maintenance free No emptying of the pits continuing gas production With 1 agitating system you can mix > 1 tank Saving money in the plant construction For tanks with height 20 m + Ø > 40 m / glass-lined, stainless steel..

10 GAS AGITATOR

11 GAS AGITATOR

12 SUBMERSIBLE AGITATOR kw (400 V / 50 Hz) Propeller Ø mm Built-in depth up to 10 m Explosion zone 1 & 2

13 PADDLE MIXER

14 MIXING and FEEDING PUMP DATA & ADVANTAGES Pre-mixing solids and liquids m³/h flow rate

15 CAVITY PUMP DATA & ADVANTAGES m³/h flow rate 1,5 55 kw engine power 3 24 bar operating pressure Dry-running protection Adjustable stator for a longer lifetime

16 BLOWERPUMP

17 CENTRIFUGAL PUMP

18 SCREW PRESS SEPARATOR 5.5 kw motor power Flow rate: biogas substrate app. 20 m³/h

19 CUTTER (MACERATOR)

20 ULTRASONIC SYSTEMS Technology - Development Sales - Marketing

21 COMBI HYDOLYSIS TANKS

22 REFERENCES worldwide (1) 2 MW Biogas Plant - THAILAND

23 2 MW Biogas Plant - THAILAND 5 Cavity Pumps and 14 Long-shaft Agitators Installation April 2016 Substrates: Napier grass Waste water from Rubber production

24 2 main digester concrete tanks

25 2 post digester lagoon (5,000 m³)

26 2 post digester lagoon (5,000 m³)

27 Reference (2): Biogas Pilot Project in THAILAND Khon Kaen University Substrates: for CBG production (compressed biogas for vehicles) Napier grass Pig manure Digester sizes: Mixing tank: 50 m³ Main digesters: 600 m³

28 Reference (2): Biogas Pilot Project Khon Kaen University

29 Reference (2): Biogas Pilot Project Khon Kaen University

30 Reference (2): Biogas Pilot Project Khon Kaen University Installation: July x Long-shaft agitator for enemaled glass-lined tank 1 x Cavity pump 1 x Centrifugal pump 1 x Sight class Spare parts for 2-3 years

31 BIOGAS SITES WORLDWIDE

32 Long-shaft agitator steel tank Dry matter content 15 %!! Waste of sugar cane and chicken manure Installation 2013 Long-shaft agitator Side entry installation Steel tank with 8 m height With tower

33 BIOGAS SITES WORLDWIDE

34 Concrete tanks Dry matter content 10 %!! Food waste and residues from tulip production Installation 2014 Long-shaft agitator Side entry installation Concrete tank Up to 3m under level

35 BIOGAS SITES WORLDWIDE

36 BIOGAS SITES WORLDWIDE Long-shaft and paddle agitator Ceiling installation Concrete hydrolysis tank Installation 2009

37 BIOGAS SITES WORLDWIDE New 3 MW Biogas Plant Installation in long-shaft agitators for enameled tanks 2 submersible mixers 10 cavity pumps

38 BIOGAS SITES WORLDWIDE Repowering 1 MW Biogas Plant Installation in long-shaft agitators 1 submersible mixer 1 cavity pump 1 centrifugal pump

39 BIOGAS SITES WORLDWIDE

40 BIOGAS SITES WORLDWIDE

41 ARMATEC FTS GmbH & Co. KG This was a short overview about our standard components, which we also like to supply to YOU!! We are looking forward to receiving your request and say thank you very much for your attention!! ARMATEC FTS GmbH & Co. KG Friedrich List Strasse 7 D Kisslegg Fon / Fax / info@armatec-fts.de Rudi Paflitschek paflitschek@armatec-fts.de