Dorot Irrigation Meter

Transcription

1 DIM-A Irrigation Meter Application The DIM meter is designed for agriculture control applications. The turbine is located at the top of the pipe. Major section of the pipe is free for water flow. Features One measuring unit for all meter sizes Magnetic drive Low head loss Optional electrical output Hermetical vacuum-sealed register Easy reading, by a 60 rotating register Flanged connection according to customers request Specifications Measuring accuracy meets ISO4064 Class A standard Pressure Rating 16 bar Body material: Polyester-Coated Cast Iron Brass removable cover Ma. temperature: 60 C Head Loss Head Loss (m) X0.01Mpa Installation The Meter will be full of water during operation The Meter can be installed in horizontal, vertical or inclined position Flush pipe line before installing the meter or without the measuring unit (using a temporary cover).5 1 X0.01Mpa Accuracy Curve +5 + Head Loss (m) Error (%) - -5 Qmin Qt Qn Qma E V E R Y T H I N G I S U N D E R C O N T R O L

2 DIM-A Irrigation Meter Dimensions and Weight Type Size Length Height Connecting Flange Weight L H kg Out Dia Bolt Circle Connecting D D1 Bolt DIM M DIM M16 1 DIM M DIM M DIM M0 0.5 DIM M0 44 DN - PN 16 60ºC DIM-A 0.01 m 1 DIM M0 60 Technical Data Type Size Maimum Norminal Transitional Minimum Minimum Maimum Flow Rate Flow Rate Flow Rate Flow Rate Reading Reading Qs Qp Qt Qmin m /h m DIM DIM DIM DIM Flow Sensor A small rotating star in the center of the dial plate helps to detect even the smallest flow through the meter. ISO 4064 Accuracy Error Qma ±% Qn ±% Qt ±% (Transitional Flow) Qmin ±5% (Lowest Flow Rate Error) DIM DIM DIM How to Order Model Optional Diameter Flange Standard *Outputs DIM AF - Standard (with preparation for Electrical Output) AE - With Electrical Output AH - Hot Water AQ - Hot Water with Electrical Output * V - for Volume electrical out put (reed switch) * F - for Flow rate out put (optical) ISO PN16 ANSI 15 BSTD JIS 10 ABNT PN16 V - Volume (Electrical) F - Flow (Optical) D O R O T C O N T R O L V A L V E S, I N C. Tel CONTROL VALVES Fa dorotus@attglobal.net info_d@dorot.com DIM-A/4.005

3 DMD-A Multi-Jet Water Meter Applications Multi Jet water meter magnetic drive, used to measure the volume of cold potable water passing through the pipeline. For industrial/municipal use. Features Magnetic drive Dry hermetically sealed High accuracy at wide flow range Magnetic shield Option for electrical out put pulse Body: casted of copper alloy Meters for hot water up to 90 C are available Easy read Rollers totalizer Stainless steel pivot for vane wheel Internal parts injected from high quality polymers Easy maintenance Technical Data Performance comply with ISO 4064 Class B standard Working Pressure 10 Bar Ma working temp. 50 C (cold water) Threaded connections BSP, NPT Installation - Horizontal (for Class B) Head Loss Curve Water Pressure MPa Accuracy Curve Error (%) Flow (m /h) 5 Error Curve Qmin Qt Qp Qs Flow (m /h) E V E R Y T H I N G I S U N D E R C O N T R O L

4 DMD-A Multi-Jet Water Meter B-H DN 15 Qn 1.5m /h 50ºC 0, ,001 Flow Sensor ISO 4064 Accuracy Error Qma ±% Qn ±% (Half of Qma) Qt ±% (Transi Flow) Qmin ±5% (Lowest Flow Rate Error) W DMD-A A small rotating star in the center of the dial plate helps to detect even the smallest flow through the meter. L 0,01 m D 0,1 H Dimensions and Weight Model DN Length Width Height Weight End Thread () L () W () H Kg D DMD G /4B DMD DMD G 1B DMD DMD G1 1/4B DMD DMD G1 1/B DMD DMD G B DMD DMD G B DMD Technical Data Model DN Qma m /h Qn m /h Qt L/h Qmin L/h Min Reading Ma Reading DMD DMD DMD DMD DMD DMD How to Order Model Optional Diameter Flange Standard Output Options DMD AF - Standard (with preparation for Electrical Output) AE - With Electrical Output 1/ - BSP NPT V - Volume Pulse for m Pulse for 10 L Pulse for 100 L D O R O T C O N T R O L V A L V E S, I N C. Tel CONTROL VALVES Fa dorotus@attglobal.net info_d@dorot.com DMD-A/4.005

5 DSD-A Single Jet Water Meter Magnetic Drive Applications Single Jet water meter magnetic drive, used to measure the volume of cold potable water passing through the pipeline. For industrial/municipal use. Features Magnetic Drive (Dry Type) Sealed register Small body and light weight Coated body, made of corrosion resistant copper alloy Pressure Loss Pressure Loss (m) Magnetic Shield 0. Technical Data Ma working temperature: 50 C Ma Working Pressure: 10 BAR Installation - Horizontal (for Class B) Performance comply with ISO 4064 Class B Standard Options Equipment with option for electrical output Water meter for hot water up to 90 C, are available Accuracy Curve Error (%) (50% Qma) Qmin Qt Qn Qma E V E R Y T H I N G I S U N D E R C O N T R O L

6 DSD-A Single Jet Water Meter Magnetic Drive Dimensions and Weight Model Size End Length Length Width Height Height Thread () L () L1 () W () H () H1 H DSD-1D 1 G/4B d D H1 DSD-0D 0 G1B W L1 L DSD-1D-40D DSD-5D 5 G1B DSD-D G1B DSD-40D 40 GB B-H DN 15 Qn 1.5m /h 50ºC DSD-A X 0 m Main Technical Data Model Size Class Qma m /h Qn (m /n) Qt L/h Qmin L/h Min Ma Weght ISO 4064 Ma. Nom. Transitional Min. Reading Reading kg Flow Flow Flow Flow m m DSD-1D 1 B DSD-0D 0 B DSD-5D 5 B DSD-D B DSD-40D 40 B Flow Sensor A small rotating star in the center of the dial plate helps to detect even the smallest flow through the meter. How to Order Model Optional Diameter Flange Standard *Electrical Output DSD AF - Standard (with preparation for Electrical Output) 1/ - 1 1/ BSP V - Volume AE - With Electrical Output 1-40 NPT DSD-A/4.005 D O R O T C O N T R O L V A L V E S, I N C. Tel CONTROL VALVES Fa dorotus@attglobal.net info_d@dorot.com

7 DWM-A Turbine Water Meter Applications Woltman type water meter, used to measure the volume of cold potable water passing through the pipeline. For industrial/municipal use. Features Meter will be installed in vertical, horizontal or inclined position Hermetically sealed register (magnetic coupling) Low Head Loss Maimum working pressure 16 bar Easy maintenance of the measuring unit Dial Plate can be supplied in m, or US gallons. Totalizer has big and clear numerals Maimum working tempt. 60 C Options Equiped with option for electrical output Hot water meters in size to 8 Head Loss Head Loss (m) Accuracy Curve Installation Requirements Prior flushing of line before water meter installation Meter shall be full of water at flow measuring Install meter in the line with straight pipe 5DN length at up stream and DN at down stream Error (%) - -5 (50% Qma) Qmin Qt Qn Qma E V E R Y T H I N G I S U N D E R C O N T R O L

8 I I I DWM-A Turbine Water Meter Dimensions Size DN inch 1/ L-Length DN H H-Height Weight kg L Performance data B Qn 15m /h DN 50 PN 16 DWM-A m Flow Sensor A small rotating star in the center of the dial plate helps to detect even the smallest flow through the meter X 0, X 0,1 Size DN inch Nominal Flow Rate Qn (m /h) (±%) Ma. Flow Rate Qma (m /h) (±%) Transition Flow Rate Qt (m /h) (±%) Min. Flow Rate Qmin (m /h) (±5%) Ma. Register Capacity (m ) Min. Reading Unit (m ) 1/ How to Order Model Optional Diameter Flange Standard *Outputs DWM AF - Standard (with preparation for Electrical Output) AE - With Electrical Output AH - Hot Water AQ - Hot Water with Electrical Output * V - for Volume electrical out put (reed switch) * F - for Flow rate out put (optical) ISO PN16 ANSI 15 BSTD JIS 10 ABNT PN16 V - Volume (Electrical) F - Flow (Optical) DWM-A/4.005 D O R O T C O N T R O L V A L V E S, I N C. Tel CONTROL VALVES Fa dorotus@attglobal.net info_d@dorot.com