BOSHART INDUSTRIES Telephone: Toll Free: Fax:
|
|
- Beverly Fisher
- 5 years ago
- Views:
Transcription
1 0- Available in cast bronze or cast brass body and poppet NBR "O"-Ring Seal (Nitrile Buna-N) BRONZE OR BRASS CHECK VALVE BRONZE 7CV050 7CV075 7CV00 7CV25 7CV50 7CV200 7CV300 7CV TAPPING(S) INLET SIDE BRASS 7YBCV050 7YBCV075 7YBCV00 7YBCV25 7YBCV50 7YBCV BRONZE CONTROL CENTER CHECK VALVES TAPPING(S) OUTER LENGTH OUTLET SIDE DIA Temp.Max. 80 F (80 C) 6 3 SERIES A 7CVA-00 7CVA-25 7CVA-200 () /8 FPT None () /8 FPT None () /8 FPT None SERIES B 7CVB-00 7CVB-25 7CVB-50 7CVB-200 () /8 FPT () / FPT () /8 FPT () / FPT () /8 FPT () / FPT () /8 FPT () / FPT SERIES C 7CVC-00 () /8 FPT (2) / & () /8 FPT 7CVC-25 () /8 FPT (2) / & () /8 FPT NOTE: /8 Outlet tapping c/w /8 brass plug SERIES D 7CVD-00 7CVD-25 7CVD-200 None (2) / FPT None (2) / FPT None (2) / FPT SERIES E 7CVE-00 None () / FPT CVE-25 None () / FPT Valves do not include items shown in pictures Temp.Max. 80 F (80 C)
2 0-2 BOSHART INDUSTRIES BRONZE CHECK VALVE MPT X FPT 7CVMF #304 Stainless Steel body #304 Stainless Steel poppet Viton "O" Ring seal 7CVSS-050 7CVSS-075 7CVSS-00 7CVSS-25 7CVSS-50 7CVSS-200 7CVSS-300 7CVSS STAINLESS STEEL CHECK VALVE STAINLESS STEEL CHECK VALVE - MALE X FEMALE MPT X FPT 7CVSSMF SWING CHECK VALVE Max. Working Pressure 200 PSI Water, Oil & Gas (Cold Water, Non-shock) Cast Bronze body, disc and cap Brass rod pin and screw Max. Working Temperature 00 C Threads to ANSI B2. CxC to ANSI B IPS CXC
3 0-3 UNLEADED ENVIRO-CHECK FLOMATIC The first Lead-Free bronze check valve, developed by Flomatic Corporation in order to protect potable water from lead contamination. Flomatic s entire line of bronze valves is available in this new material. Lead free bronze (FEDERALLOY #) body Hex shaped for easy wrenching Non-Spin Acetal poppet Stainless Steel spring 7-420E E..4 Lead free bronze body Non-Spin Acetal poppet E E E E E E E* E* E* 24.0 *2- to Unleaded Bronze Poppet Submersible pump check valve Unleaded alloy Hex shaped for easy wrenching M x F 7-422E M x F E M x F E Submersible pump check valve Unleaded alloy M x F 7-407E M x F E M x F E* * Unleaded Bronze Poppet Nominal Chemistry (FEDERALLOY I - 8FL) Copper (Cu) Balance Tin (Sn) 4.0% - 6.0% Lead (Pb) 0.5% Max Zinc (Zn) 2.0% - 4.0% Iron (Fe) 0.3% Max Nickel (Ni) 0.4% -.0% MODEL 00E - ENVIRO-CHECK MODEL 80E - ENVIRO-CHECK Stainless steel spring MODEL 00ME - ENVIRO-CHECK Stainless Steel spring Threaded male x female connection Non spin acetal poppet MODEL 80ME - ENVIRO-CHECK Non-spin acetal poppet Antimony (Sb) Sulphur (S) Phosphorus (P) Silicon (Si) Aluminum (Al) Bismuth (Bi) 5% Max. 0.08% Max 0.0% % 0.005% Max 0.005% Max %
4 0-4 BOSHART INDUSTRIES MODEL 80HTE - HIGH TEMPERATURE - ENVIRO-CHECK / 7-58HTE 7-559HTE HTE HTE 7-403HTE HTE HTE HTE s High temperature nickel plated poppet EPDM seal, stainless steel spring Ideal for hot water applications Temp Max 300 F (45 C) Pressure Max 00 PSI Cast body construction / Stainless Steel spring Nylon poppet c/w NITRILE (Buna-N) seal / 7-58E 7-559E - MODEL 290E - ENVIRO-CHECK IN-LINE 0 0 Pressure Max 50 PSI MODEL 297D - PLASTIC CHECK Plastic (Acetal) body / Stainless Steel spring Nylon poppet c/w VITON seal oz 0.04 oz 0.06 oz MODEL 290P - PLASTIC CHECK Polypropylene body / Stainless Steel spring Polypropylene poppet c/w viton seal oz Durable delrin polymer body / 36 Stainless Steel spring Delrin poppet c/w Nitrile (Buna-N) seal Not recommended for use in gasoline systems 7SLC-075 7SLC-00 7SLC-25 7SLC MODEL SLC - BRADY PLASTIC CHECK ENTERS PIPE 2- Durable PVC body / 304 Stainless Steel spring PVC poppet c/w EPDM seal THREADED PVC IN-LINE CHECK VALVE SOCKET 70S-05 70S-07 70S-0 70S-2 70S-5 70S Pressure Max 75 PSI Tensile Strength exceeds Burst Pressure 30.9 exceeds 500 PSI.25 each Temp Max 200 F (90 C) Pressure Max 50 PSI Temp Max 40ºF (60ºC)
5 MODEL 80 DI - DUCTILE IRON CHECK Designed for vertical applications High strength epoxy coated ductile iron body, disc and follower Features a NITRILE (Buna-N) seal, Stainless Steel spring fasteners Ductile iron poppet Note: through features acetal poppet. - cast steel body 7403DI DI DI NON STOCK ITEM PLEASE CALL FOR DELIVERY To order model 80DI with break off plug add PLG to part number Contact Sales Rep for pricing and delivery. MODEL 80DIX - DUCTILE IRON CHECK Similar to model 80DI but features a double-guided ductile iron poppet Designed for vertical and horizontal applications 77938DIX DIX DIX To order Model 80DIX with break off plug, add PLG to part number. Contact sales rep for pricing and delivery. Similar to model 80DI but features Male threaded inlet and female threaded outlet Ideal for submersible pumps 80MDIX Doubled Guided poppet NOTE: Port hole one size smaller MPT x FPT MPT x FPT MPT x FPT MPT x 5 FPT MPT x 5 FPT MPT x 6 FPT* To order Model 80MDI with break off plug add PLG to part number. Contact sales rep for pricing and delivery. MODEL 80MDI - DUCTILE IRON CHECK Replacement break-off plug Stainless steel construction 5, 6, BREAK OFF PLUG Threaded 3/8" to install into valve When broken off, riser pipe drains
Combination Air Valves - Stainless Steel/ Sanitary Sewer/ For 2 Thru 12 Mains
D 1 D 1.1 D 1.2 D 1.3 D 1.4 D 1.5 D 2 D 3 D 3.1 D 3.2 D 4 D 4.1 D 5 D 6 D 7 D 8 Valves- Resilient Seat/ 2 (FIPT X FIPT) Valves - AWWA C509/ Resilient Seat/ 2 Thru 12 (MJ X MJ) Tap Valves - AWWA C509/ Resilient
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationH-25 Series. Up to 20 gpm (75.7/min) H-25 Specialized Designs
H-25 Series Up to 2 gpm (75.7/min) H-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The H-25 Hydra-Cell
More informationThis specification, applies at any Vale locations indicated with approval on the cover page, with the following exceptions:
1/5 1.0 PURPOSE This specification describes the minimum requirements for cold potable water plumbing systems within buildings. 2.0 APPLICATION This specification, applies at any Vale locations indicated
More informationCATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationCATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationKor Inc. FLOCENTRIC TM ECCENTRIC PLUG
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG ECCENTRIC PLUG VALVE FLOCENTRIC TM The FLOCENTRIC Eccentric Plug Valve is manufactured using CNC equipment in a world class facility using the finest materials available.
More informationCATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationCATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationCopper Alloy. LEADED Red BRASS ( ) C Al Amana Foundry We Make The Quality By Experience And Science
LEADED Red BRASS (85-5-5-5) C83600 Tensile Strength, Ksi 30 Tensile Strength, Mpa 207 Yield Strength, Ksi 14 Yield Strength, Mpa 97 Elongation in 2 inch 20 Density g/cm3 8.83 Electrical Conductivity IACS
More informationLead Free LEAD FREE VALVES A H E AD OF TH E F L O W CATALOG C-LFV nibcoleadfree.com. *Weighted average lead content 0.25%
Lead Free LEAD FREE VALVES * A H E AD OF TH E F L O W nibcoleadfree.com CATALOG C-LFV-0416 THE LEAD FREE AUTHORITY AUTHORITY FREE LEAD THE WROT COPPER & CAST PERFORMANCE BRONZE Sweat and thread Size range:
More informationAMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
More informationThis specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationHEAVY DUTY BEVEL GEARBOX MODEL SB-V
FEATURES AND BENEFITS The SB-V series is suitable for use with Globe, Sluice and Knife Gate type valves and any other type requiring linear motion for thrust and torque applications Unique Top Entry replaceable
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationAmerican Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
More informationTECHNO Male-Threaded, Grooved and Plain End Check Valves. Low pressure loss, lightweight design with compact construction
TECHNO Male-Threaded, Grooved and Plain End Check Valves Low pressure loss, lightweight design with compact construction TECHNO A well-known Brand with Past History and a Brand New Future! Techno Corporation
More informationService Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe
F 1 F 1.1 F 1.2 F 2 F 2.1 F 3 Service Saddles/ Hinged Type for 2 PVC Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe Service Saddles/ Ductile Iron/ Stainless Steel Straps
More informationProperties of Valve Materials
Properties of Valve Materials ASTM NO. OTHER DESIGNATION AL MANGA- CARBON CHROME COBALT COPPER IRON LEAD NESE C Cr Co Cu Fe Pb Mn MOLYB- NESE Mo Commercial Aluminum 380 SC 84 A (Modified) UNS A38000 87.0.0.3
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationD I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO
TM TECHNO Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED
More informationAMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
More informationSafety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
More informationRSCV1 AMERICAN DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL. It s What We Know. SERIES 2100 RESILIENT SEATED CHECK VALVE
3 16 SERIES 2100 RESILIENT SEATED CHECK VALVE AMERICAN FLOW CONTROL It s What We Know. AMERICAN DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION SERIES 2100 RESILIENT SEATED CHECK VALVE DROP-TIGHT SEATING at
More informationModel and 2 Heavy-Duty Regulator. Regulator Features: Regulator Specifications:
Model 5600 1 and 2 Heavy-Duty Regulator The Model 5600 is a spring-loaded, self-operated pressure regulator, available in 1 and 2 sizes and built to withstand the most difficult processes and environments.
More informationGeneral Service Butterfly Valves. Series 120, 140, 160, 300
General Service Butterfly Valves Series 0, 0, 0, 00 Av-Tek Butterfly Valves Concentric Series Technical Data Size Range: Series 0 - " to " Wafer Series 0 - " to 0" Lug Series 0 - " to " Flanged Series
More informationCopper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More information50AC Series Couplings
50AC Series Couplings Tubing Size 1/4-3/8 1/4 Flow Acetal (POM) These 1/4 flow size couplings are produced in a durable natural Acetal (POM) thermoplastic. They feature a more cost efficient plastic thumb-latch
More informationStraightway Valves. Sec 2: Products. Dia-Flo Diaphragm Valves /15
Features and Benefits Ideal for slurry, abrasive and corrosive applications, the Dia-Flo Straightway Diaphragm Valve provides the following benefits: Slurry Applications Due to the streamlined fluidpassage,
More informationBid Opportunity PLUMBING SYSTEMS Section Installation of Boiler Heating Systems Page 1 of 7 Centennial Pool, 90 Sinclair
Installation of Boiler Heating Systems Page 1 of 7 SECTION PAGE PART 1 GENERAL 2 1.1 General 2 1.2 Reference 2 1.3 Work Included 2 1.4 Related Work Specified Elsewhere 2 PART 2 PRODUCTS 3 2.1 Pipe and
More informationCOMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
INCH-POUND A-A-59440/2B 21 May 2012 SUPERSEDING A-A-59440/2A 23 May 2005 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
More informationSection 19 Check Valves and Strainers
Section 19 Check Valves and Strainers Edition 2 271 [19] CECK VAVES AND STRAINERS Check Valves and Strainers Swing Check Valves Swing Check valves are used where the flow moves through the valve in approximately
More informationD-35 Series. Up to 37 gpm (140 l/min) D-35 Specialized Designs
D-35 Series Up to 37 gpm (14 l/min) D-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The D-35 Hydra-Cell
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationP630 HIGH FLOW GAS REGULATOR
P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a
More informationSECTION GENERAL-DUTY VALVES FOR WATER-BASED FIRE-SUPPRESSION PIPING
PART 1 GENERAL SECTION 21 0523 GENERAL-DUTY VALVES FOR 1.01 SECTION INCLUDES A. Two-piece ball valves with indicators. B. Bronze butterfly valves with indicators. C. Iron butterfly valves with indicators.
More informationWater & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
More informationSection B: Fittings and Accessories Effective Date: Revision #: 1
B 1 PVC Fittings - Schedule 40 B 2 PVC Fittings - Schedule 80 B 3 HDPE Flange & Mechanical Joint Adapters (AWWA C 906) B 4 B 5 HDPE Pipe Wall Stiffeners Plastic Fittings (SDR-21) B 6 PVC Fittings - Gasketed
More informationCATALOG C-FPV-0518 AHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0518 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationHOT, CHILLED, AND CONDENSING WATER PIPING SPECIALTIES (HVAC)
SECTION 15432 HOT, CHILLED, AND CONDENSING WATER PIPING SPECIALTIES (HVAC) PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15047 - Identification. 2. 15433 - HVAC Pumps. 3. 15555 - Horizontal Fire
More informationNDP-40 Specifications
NDP-40 Specifications Port Dimensions (107 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 1-1/2" ANSI B16.5 #150 Kynar (PVDF) 1-1/2" ANSI B16.5 #150 Aluminum (ADC-12) 1-1/2" ANSI B16.5 #150
More informationKENT COUNTY WATER AUTHORITY. ERRATUM to Rules and Regulations of the Kent County Water Authority
KENT COUNTY WATER AUTHORITY ERRATUM to Rules and Regulations of the Kent County Water Authority Section 4.9.1.1 Resilient Seat Gate 4 inch to 12 inch: Replace with the attached. Section 4.9.1.3 Tapping
More informationConnexion Developments Ltd + Solenoid Valves (UK) Ltd Unit 3, Rainbow Court, Armstrong Way, Great Western Business Park, Yate, Bristol, BS37 5NG,
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 THERMOPLASTICS & ELASTOMERS ABS Acrylonitrile Butadiene Styrene Class 32222 conforming to ASTM D3965 is a time-proven material. The smooth
More informationSpecification Drainage Engineering Guide. Hydrants.
Specification Drainage Engineering Guide Hydrants www.zurn.com APPLICATION INDEX WALL HYDRANTS NON-FREEZE/SELF-DRAINING MODERATE CLIMATE Retail Outlets Z1300, Z1305, Z1310, Z1320 Z1330, Z1335 Office Buildings
More informationCast Iron Valves and Strainers
Cast Iron Valves and Strainers Proven reliability Robust design Economical Cast Iron Gate Valve F I G G A 1 4 G A T E V A L V E Heavy duty design Dezincification resistant trim Outside screw and yoke,
More informationDesign and Construction Standards SECTION HYDRONIC PIPING
SECTION 15510 HYDRONIC PIPING PART 1 GENERAL 1.1 REFERENCES A. ANSI/ASME SEC 9: Welding and Brazing Qualifications. B. ANSI/ASME B16.3: Malleable Iron Threaded Fittings Class 150 and 300. C. ANSI/ASME
More informationStandard Properties of Typical Brass, Bronze, & Aluminum Alloys visit us online at
Standard Properties of Typical Brass, Bronze, & Aluminum Alloys 630 East Green Street Bensenville, IL 60106 Tel: 630.766.3112 Fax: 630.766.3307 630 East Green Street Bensenville, IL 60106 Tel: 630.766.3112
More informationAheAd OF the FlOw. Fire Protection Valves
Catalog C-FPV-0512 AheAd OF the FlOw Fire Protection Valves Business-to-Business solutions look to nibco for technology leadership. the velocity with which e-business evolves demands that new products
More informationBase Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water
Base Models: 1-22SV Base Models: 1-22SV F, P, R VERSIONS 1 Pump Body Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 2 Impeller Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 3 Diffuser
More informationSECTION HYDRONIC PIPING
PART 1 GENERAL 1.1 REFERENCES SECTION 15510 HYDRONIC PIPING A. ANSI/ASME SEC 9: Welding and Brazing Qualifications. B. ANSI/ASME B16.3: Malleable Iron Threaded Fittings Class 150 and 300. C. ANSI/ASME
More informationRESEARCH AND TECHNOLOGY BUILDING RENOVATION 05/18/09 SECTION DOMESTIC WATER PIPING SYSTEM
SECTION 22 11 00 DOMESTIC WATER PIPING SYSTEM PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Domestic water piping, above grade. 2. Unions and flanges. 3. Valves. 4. Pipe hangers and supports. 5. Backflow
More informationDRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial
DRAINS: BATH,, SHOWER &, S COMMERCIAL SHOWER DRAINS GENERAL PURPOSE DRAINS FIT-FLUSH CLEAN-OUTS BATH WASTES BATH WASTES KITS/PARTS/COMPONENTS BATH DRAIN BODIES/ASSEMBLIES BATH DRAIN KITS/PARTS/COMPONENTS
More informationBasket Strainers. Threaded. Basket. Strainers. Flanged Basket. Strainers
Basket Basket feature top removal of the screen. The screen is in the form of a basket, with a lifting handle, so that all particulate captured and retained by the screen can be easily removed for disposal.
More informationCover Page - Series 60 Wafer Check Valves
DESCRIPTION Cover Page - Series 60 Wafer Check Vs Standard Features Section 2 Index BULLETIN NO. CV-100 CV-101R3 VALVE DIMENSIONS - DIN 3202 DRAWING NO. 2 to 12 (Inches) / CV Values & Construction Materials
More informationC-FPV-0810 Catalog C-FPV-0810 A h e A d O F t h e F l O w F i r e P r o t e c t i o n Va l v e s
catalog C-FPV-0810 a h e a d o f t h e f l o w F i r e P r o t e c t i o n Va l v e s Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves
More informationBRAZING & SOLDERING ALLOYS & FLUXES
YOUR COMPLETE SOURCE FOR BRAZING & SOLDERING ALLOYS & FLUXES Name Description AWS Spec Composition % Temperature F Ag Cu Zn Sn Other Melt Flow Braze 560 Lowest temperature, Cadmium-free filler metal, very
More informationVALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
More informationSECTION HYDRONIC PIPING
PART 1 GENERAL 1.1 REFERENCES SECTION 23 21 13 HYDRONIC PIPING A. ANSI/ASME SEC 9: Welding and Brazing Qualifications B. ANSI/ASME B16.3: Malleable Iron Threaded Fittings Class 150 and 300 C. ANSI/ASME
More informationAHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0414 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
More informationCATALOG C-FPV-0509 AHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0509 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
More information40PP Series Couplings
Tubing Size 1/4-3/8 1/4 Flow Polypropylene 40PP Series Couplings 40PP Series couplings offer 1/4 flow and are produced from medical grade gamma sterilizable polypropylene. The 40PP Series polypropylene
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More informationModel B. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationCopper-Type K soft Drawn 40, 50 HDPE 100 and larger
1.0 GENERAL 1.1 Scope 1.1.1 The work covered by this section involves the installation of water and sewer service connections and all other associated work. 1.2 Authorization 1.2.1 Do not install service
More informationTable of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
More information4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
More informationAMERICAN DARLING 5 1 /4" B-62-B FIRE HYDRANT
AMERICAN DARLING 5 1 /4" B-62-B FIRE HYDRANT CONSTRUCTION PIPE PLUG-provides access to lubrication chamber. Pipe plug can be replaced with lubricating fitting to lubricate the rod threads and thrust washers.
More informationBULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationTubing Size 1/4-3/8 1/4 Flow Glass Filled Polypropylene
Tubing Size 1/4-3/8 1/4 Flow Glass Filled Polypropylene 50GP Series Socket 50GP Series couplings are manufactured from a high performance glass filled polypropylene. With excellent chemical resistance
More informationTAPPING SADDLES DN 40 - DN 450
TAPPING SADDLES 0-0 FAST, PERMANENT TAPPING SOLUTION FOR BOTH RIGID AND FLEXIBLE PIPE TYPES FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated (depending
More informationWeir Valve Selections
Unlined Metal Excellent Cv s Complete Selection of End Connections ASTM Materials Include: - Cast Iron ASTM A-26 Class B - Ductile Iron ASTM A-395 Grade 60-40-8 - Cast Steel ASTM A-26 Grade WCB - 36 Stainless
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationSECTION HYDRONIC PIPING
PART 1 GENERAL 1.1 REFERENCES SECTION 23 21 13 HYDRONIC PIPING A. ASME BPVC Section IX - Welding and Brazing Qualifications B. ASME B16.3 - Malleable Iron Threaded Fittings Classes 150 and 300 C. ASME
More informationDimensions Mechanical and Performance Requirements. Round Spacers Hex Spacers Round Threaded Female Standoffs...
Spacers & Standoffs imensions Mechanical and Performance Requirements Round Spacers... 295 Hex Spacers... 296 Round hreaded emale Standoffs... 297 Hex hreaded emale Standoffs... 298 Hex & Round hreaded
More informationPARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
More informationWANG TAPPING SADDLES. fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES DESCRIPTION APPLICATION TECHNICAL DATA
WANG TAPPING SADDLES 0-0 fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated
More informationStudent Services & Classroom Addition. A. This Section includes the following domestic water piping specialties:
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following domestic water piping specialties: 1. Vacuum breakers. 2. Backflow preventers. 3.
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationAheAd OF the FlOw. Butterfly Valves
Catalog C-BFV-0912 AheAd OF the FlOw Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationSwing Check Valve. Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508
Swing Check Valve PN16/PN25/Class125/Class250 Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508 Size 50 to 600 working pressure PN16/Class125. Size 50 to 300 working pressure is
More informationCHAPTER 4 PIPES. Prof. Dr. Uğur Atikol
CHAPTER 4 PIPES Prof. Dr. Uğur Atikol History Materials: Lead used to be very popular material due to its availability, durability and ease of working. It had environmental problems Industrial developments
More informationCast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE
Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za
More informationObsolete. Description. Rhinor SD2/XD2 Type-H Follower Modules
Description See Figure. The Type-H follower module attaches onto the hydraulic section of the pump (). It is designed to force material out of straight-sided containers. Type-H follower plate modules are
More informationParticulate Filters. Filter Function. Exclusive Dense Pack Element Design. Optional Components
Particulate ilters Inlet Outlet Monnier particulate filters remove solid and liquid contaminants from compressed air. The proper selection and use of compressed air filters will prevent many short and
More informationSUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
More informationSubmittal for Aquatherm Piping System
Submittal for Aquatherm Piping System Project Name: Project Location: Date: To whom it may concern, We are proposing to upgrade the piping parts on the above project to the polypropylene Aquatherm Green
More information2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT CONSTRUCTION OPERATING NUT-cast one piece bronze operating nut. Design of the operating thread permits slow closing of the hydrant valve,
More information94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in
More informationCATALOG C-BFV-0518 AHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-0518 AHEAD OF THE FLOW Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationVIKING LID-EASE BASKET-TYPE LINE STRAINERS FEATURES
VIKING LID-EASE Section 640 Page 640. Issue C FEATURES LIGHT IN WEIGHT EASY TO CLEAN LOW PRESSURE DROP SMALL IN OVERALL DIMENSION VIKING QUALITY CONSTRUCTION IN ALUMINUM, CAST IRON, DUCTILE IRON OR STAINLESS
More informationAircraft. Automotive. Electronic. Oil and Gas
4. Industry Applications of Copper Aircraft Heat Exchange Cable Assembly Terminals Couplers and Connectors Valves Automotive Radiators Brake Tubing Brake Lines Air Coolers Tubing for Master Cylinder Electronic
More informationSECTION 13. A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications.
SECTION 13 PIPE, TUBE AND PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications. 1.02 QUALITY ASSURANCE
More informationCD Capacitor Discharge The Process
CD Capacitor Discharge The Process. CD. Capacitor Discharge Why CD Studs are better CD. Capacitor Discharge General Specifications Weld Base: CD. Stud Load/Torque Strengths Stud Material Stud Size Maximum
More informationVIKING BOLTED-LID BASKET-TYPE LINE STRAINERS
Page 642.1 LOW PRESSURE DROP EASY TO CLEAN LIGHT IN WEIGHT SMALL IN OVERALL DIMENSION VIKING QUALITY DUCTILE CONSTRUCTION Series Description Viking Bolted-Lid Simplex Strainers provide protection for your
More information