Safety Test Report. Reliability Laboratory of Huawei Technologies Co., Ltd.

Transcription

1 Safety Test Report roduct Name: roduct Model: roduct Type: Report Number: ower System T48200A T48200A-H15A3,T48200A-H15A5, T48200A-D15A1,T48200E-H09A1, T48200E-D09A1 SYBH (A) Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, ,.R.C Tel: Fax:

2 Safety Test Report of T48200A Security Level: Internal Use Only Notice 1. The laboratory has passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 4. The test report is invalid if there is any evidence of erasure and/or falsification. 5. The test report is only valid for the test samples. 6. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. Report No.: SYBH(A) age 1 of 19

3 Safety Test Report of T48200A Security Level: Internal Use Only Applicant: Address: roduct Name: roduct Model: Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, ,.R.C T48200A T48200A-H15A3,T48200A-H15A5, T48200A-D15A1,T48200E-H09A1,T48200E-D09A1 Date of Receipt Sample: Start Date of Test: End Date of Test: Test Result: ass Approved by Senior Engineer: Kelvin Shi Date Name Signature repared by: Rafer Xu Date Name Signature Report No.: SYBH(A) age 2 of 19

4 Safety Test Report of T48200A Security Level: Internal Use Only Modification Record No. Last Report No. Modification Description 1 N/A First report Report No.: SYBH(A) age 3 of 19

5 Safety Test Report of T48200A Security Level: Internal Use Only Report Reference No.... : TEST REORT IEC and/or EN Information technology equipment Safety art 22: Equipment to be installed outdoors SYBH(A) Date of issue... : Testing Laboratory... : Address... : Applicant s... : Address... : Test specification: Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, ,.R.C Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, ,.R.C Standard...: Test procedure...: Non-standard test method..: Test Report Form No....: Test Report Form(s) Originator...: IEC : 2005 (1 st Edition) and/or EN /AC: 2008 CB / CCA N/A IEC60950_22A The Standards Institution of Israel Ltd. TRF modified by... : Huawei Master TRF... : Dated Copyright 2007 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. Report No.: SYBH(A) age 4 of 19

6 Safety Test Report of T48200A Security Level: Internal Use Only Test item description... : Trade Mark... : ower System HUAWEI Manufacturer : Huawei Technologies Co., Ltd. Model/Type reference : Ratings... : T48200A-H15A3,T48200A-H15A5, T48200A-D15A1,T48200E-H09A1,T48200E-D09A1 T48200A-H15A3,T48200A-H15A5,T48200A-D15A1, T48200E-H09A1,T48200E-D09A1 with same electrical rating as below: Input: ~ V,50/60 Hz,84 A MAX ~ / V,3W+N+E,50/60 Hz,41 A MAX Output: -48 V,200 A MAX Report No.: SYBH(A) age 5 of 19

7 Safety Test Report of T48200A Security Level: Internal Use Only Summary of testing: Tests performed (name of test and test clause): The submitted samples were found to comply with the requirements of: - IEC : 2005 (1st Edition) and/or - EN /AC: 2008 Testing location: Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, ,.R.C Summary of compliance with National Differences: The following group and/or national deviations were considered: Austria, Belgium, Switzerland, Czech Republic, Germany, Denmark, Spain, Finland, France, United Kingdom, Hungary, Italy, Netherlands, Norway, oland, Sweden, Slovenia and Slovakia. Copy of marking plate Report No.: SYBH(A) age 6 of 19

8 Safety Test Report of T48200A Security Level: Internal Use Only Report No.: SYBH(A) age 7 of 19

9 Safety Test Report of T48200A Security Level: Internal Use Only Report No.: SYBH(A) age 8 of 19

10 Safety Test Report of T48200A Security Level: Internal Use Only Test item particulars... : Temperature range... : ºC Overvoltage category... : Before SD:OVC III,after SD OVC II I protection class... : I55 ossible test case verdicts: - test case does not apply to the test object... : N/A - test object does meet the requirement... : (ass) - test object does not meet the requirement... : F (Fail) General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a point is used as the decimal separator. Dates in this report are in the format YYYY-MM-DD. This Test Report Form is intended for the investigation of safety of equipment to be installed outdoors in accordance with IEC It can only be used together with the IEC requirements. Report No.: SYBH(A) age 9 of 19

11 Safety Test Report of T48200A Security Level: Internal Use Only General product information: The T48200A is outdoor power system for communications. It converts power into stable -48 V DC power, and implements monitoring and provides backup power. With the compact design, intelligent monitoring, flexible backup of power, and smooth expansion of capacity, it is applicable to various scenarios and power for outdoor microwave equipment. The product covered in this report is a power system that employs power distribution unit (DU), site monitor unit (SMU02B), power supply units (SUs), and battery reserve space. T48200A-H15A3,T48200A-H15A5,T48200A-D15A1,T48200E-H09A1,T48200E-D09A1 have the same electrical rating and input style(3w+n+e or single phase), The output of T48200A-H15A3,T48200A-H15A5,T48200A-D15A1,T48200E-H09A1 and T48200E-D09A1 is 48 V d.c., 200 A Max,and the detail outputs configuration refer to Attachment No. 1. The model difference between these five models shown as below table: T48200A- H15A3 T48200A- H15A5 T48200A- D15A1 T48200E- H09A1 T48200E- D09A1 Size(W*D*H) 1500mm*650 mm*650mm 1500mm*650 mm*650mm 1500mm*650 mm*650mm 900mm*650m m*650mm 900mm*650m m*650mm Weight 120kg 120kg 120kg 70kg 70kg Air filter No No Yes No Yes Heater box No Yes No No No Air cooling condition DU cabinet: heat exchanger Battery cabinet: directly ventilation DU cabinet: heat exchanger Battery cabinet: directly ventilation DU cabinet: directly ventilation Battery cabinet: directly ventilation DU cabinet: heat exchanger Battery cabinet: N/A Battery space Yes Yes Yes No No DC load LLVD:63A 2,3 2A 2 BLVD:16A 2 LLVD:63A 2,3 2A 2 BLVD:16A 2 LLVD:63A 2,3 2A 2 BLVD:16A 2 LLVD:63A 2,3 2A 2 BLVD:16A 2, 10A 1 DU cabinet: directly ventilation Battery cabinet: N/A LLVD:63A 2,3 2A 2 BLVD:16A 2, 10A 1 Due to the similar electrical design,tests performed on model T48200A-H15A5 were considered to be representative of model T48200A-H15A3 and model T48200E-H09A1 were considered to be representative of model T48200A-D09A1. Clearance distance was evaluated altitude up to 4000 m above sea level. All output circuits are evaluated as SELV circuits, and this power system contains output exceeding 240VA. The maximum temperature is 45 C Attachments: Attachment 1: photo documentation (24 pages) Report No.: SYBH(A) age 10 of 19

12 Safety Test Report of T48200A Security Level: Internal Use Only IEC/EN Clause Requirement + Test Result - Remark Verdict 4 CONDITIONS FOR OUTDOOR EQUIMENT 4.1 Ambient air temperature Suitability for use at any temperature in the range specified by the manufacturer. If not specified by the manufacturer, the range is taken as -33 C to 40 C Manufacturer declared ambient temperature: -40 C 45 C. 4.2 AC mains supply Suitability for the highest Overvoltage Category expected in the installation location Components used to reduce the Overvoltage Category comply with IEC series Reference to installation instructions... : OVC III before SD and OVC II after SD. Refer to critical component listed in the general report. 4.3 Rise of earth potential Special earthing conditions Reference to installation instructions... : Instruction specified the details. N/A 5 MARKING AND INSTRUCTIONS Special installation features for protection from conditions in the OUTDOOR LOCATION (see of IEC ) OUTDOOR ENCLOSURE classification according to IEC (I Code) I55 6 ROTECTION FROM ELECTRICAL SHOCK IN AN OUTDOOR LOCATION 6.1 Voltage limits of user-accessible parts in OUTDOOR LOCATIONS (2.2.2 and of IEC with voltage limits of IEC ) Voltages under normal conditions (V)... : Voltages under fault conditions (V)... : Only earthed metal enclosure is user-accessible conductive parts in outdoor location. When open supply mains earthing conductor, there is another earthing conductor fixed to mains earthing connector. 6.2 Limited current circuits in outdoor locations The requirements of 2.4 of IEC apply without change See separate test report IEC Report No.: SYBH(A) age 11 of 19

13 Safety Test Report of T48200A Security Level: Internal Use Only 7 WIRING TERMINALS FOR CONNECTION OF EXTERNAL CONDUCTORS The mains supply terminations powered via the normal building installation wiring are as specified in 3.3 of IEC The mains supply terminations powered directly from the mains distribution system are as specified in IEC CONSTRUCTION REQUIREMENTS FOR OURDOOR ENCLOSURES 8.1 General rotection against corrosion by use of suitable materials or by application of a protective coating arts serving as a functional part of an OUTDOOR ENCLOSURE (e.g., dials, connectors, etc.) comply with the same environmental protection requirements as for the OUTDOOR ENCLOSURE Use of OUTDOOR ENCLOSURE to carry current during normal operation Connection of a conductive part of an OUTDOOR ENCLOSURE to protective earth for carrying fault currents (see 2.6 of IEC and 8.3 of this standard) No such parts. (see separate test report IEC and 8.3 of this report) 8.2 Resistance to ultra-violet radiation N/A Resistance of non-metallic parts of an OUTDOOR ENCLOSURE to degradation by ultra-violet (UV) radiation arts providing mechanical support: Tensile strength test (ISO 527) Flexural strength test (ISO 178) arts providing impact resistance: Charpy impact test (ISO 179) Izod impact test (ISO 180) Tensile impact test (ISO 8256) All parts: Flammability classification ( and annex A of IEC ) The equipment is metal enclosure. 8.3 Resistance to corrosion General Resistance of metallic parts of an OUTDOOR ENCLOSURE to the effects of water-borne contaminants Alternate method for (IEC ) Test apparatus Salt-spray test (IEC ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Report No.: SYBH(A) age 12 of 19

14 Safety Test Report of T48200A Security Level: Internal Use Only Test in a water-saturated sulphur dioxide atmosphere (water-saturated sulphur dioxide atmosphere as described in Annex A; chamber as described in ISO 3231) Test procedure Compliance criteria 8.4 Bottoms of FIRE ENCLOSURES Comply with of IEC Bottom of FIRE ENCLOSURE of OUTDOOR EQUIMENT mounted directly and permanently on a noncombustible surface (e.g., concrete or metal) 8.5 Gaskets If gaskets are used as the method for protection against the ingress of potential contaminants, requirements of through apply General Oil resistance No oil or coolant used N/A Securing means 9 ROTECTION OF EQUIMENT WITHIN AN OUTDOOR ENCLOSURE 9.1 rotection from moisture (see Table 2) I rotection from plants and vermin 9.3 rotection from excessive dust Report No.: SYBH(A) age 13 of 19

15 Safety Test Report of T48200A Security Level: Internal Use Only 10 MECHANICAL STRENGTH OF ENCLOSURES 10.1 General 10.2 Impact test (4.2.5 of IEC ) Compliance criteria: - after test the level of protection remains in accordance with 9.1of this standard - after test the requirements of of IEC are met 11 OUTDOOR EQUIMENT CONTAINING VENTED BATTERIES Adequate ventilation in the compartment housing a vented battery, where gassing is possible during normal usage or over-charging rotection against the risk of ignition of local concentrations of hydrogen and oxygen in a compartment containing both a battery and electrical components Hydrogen gas concentration measurement test Measured hydrogen gas concentration (% by volume)... : Max. allowed gas concentration for the mixture location in proximity to an ignition source (% by volume)... : Max. allowed gas concentration for the mixture location not in proximity to an ignition source (% by volume)... : Overcharging of rechargeable battery (see of IEC ) 1% by volume 2% by volume (See separate test report of IEC ) A ANNEX A, WATER-SATURATED SULHUR DIOXIDE ATMOSHERE (see and 8.3.3) N/A B ANNEX B, WATER SRAY TEST (see 9.1) N/A C ANNEX C, ULTRAVIOLET LIGHT CONDITIONING TEST (see 8.2) N/A C.1 Test apparatus... : N/A C.2 Mounting of test samples... : N/A C.3 Carbon-arc light-exposure apparatus... : N/A C.4 Xenon-arc light-exposure apparatus... : N/A D ANNEX D, GASKET TESTS (see 8.5) D.1 Gasket tests D.2 Tensile strength and elongation tests (for gaskets that can stretch) Report No.: SYBH(A) age 14 of 19

16 Safety Test Report of T48200A Security Level: Internal Use Only Tensile strength (%)... : Type:01: 104.6% Elongation (%)... : Type:IX001C: Visible deterioration, deformation, melting, cracking or hardening of the material... : D.3 Compression test (for gaskets with closed cell construction) 92.86% No. Initial thickness of the specimen (mm)... : Type:01: Thickness of the specimen after test a) (mm), compression set after test a) (%)... : Thickness of the specimen after test b) (mm), compression set after test b) (%)... : Thickness of the specimen after test c) (mm), compression set after test c) (%)... : Visible cracks or deterioration... : No. 3.04/3.04/3.02 Type:01: 3.03/3.03/ % / 0.33% / 0% Type:01: 3.00/3.00/ % / 0.99% / 0.66% Type:01: 2.88/2.90/ % / 3.29% / 3.31% D.4 Oil immersion test N/A Swelling (%)... : Shrinking (%)... : N/A N/A E ANNEX E, RATIONALE E.1 General E.2 Electric shock E.3 Energy related hazards E.4 Fire E.5 Mechanical hazards E.6 Heat related hazards E.7 Radiation E.8 Chemical hazards E.9 Biological hazards E.10 Explosion hazards Report No.: SYBH(A) age 15 of 19

17 Safety Test Report of T48200A Security Level: Internal Use Only Contents General IEC :2005 COMMON MODIFICATIONS Add the following annexes: Annex ZA (normative) Normative references to international publications with their corresponding European publications Annex ZB (normative) Special national conditions Delete all the country notes in the reference document according to the following list: 4.1 Note Note 8.5 Note 10.2 Note D.3 Note D.4 Note ZA NORMATIVE REFERENCES TO INTERNATIONAL UBLICATIONS WITH THEIR CORRESONDING EUROEAN UBLICATIONS ZB SECIAL NATIONAL CONDITIONS N/A 4.1 In Finland, Norway and Sweden, the temperature in winter may be extremely low. For OUTDOOR EQUIMENT this will demand special design so that the equipment can withstand transport, erection and operation/service at temperatures down to -50 C 10.2 In Finland, Norway and Sweden there are additional requirements for the minimum ambient temperature. See 4.1 of this annex. D.3 In Finland, Norway and Sweden there are additional requirements for the minimum ambient temperature. See 4.1 of this annex. N/A N/A N/A Report No.: SYBH(A) age 16 of 19

18 Safety Test Report of T48200A Security Level: Internal Use Only 8.2 TABLE: Resistance to ultra-violet radiation 8.2a) Tensile strength test (ISO 527) N/A Material identification (manufacturer, type designation)... : Shape and dimensions of test samples... : Conditioning for Set 1 of samples... : Conditioning for Set 2 of samples (including Annex C)... : Test conditions (T C, RH %)... : Set 1 (without Annex C conditioning) Set 2 (after Annex C conditioning) Test sample # Tensile strength (Ma) Test sample # Tensile strength (Ma) Arithmetic mean for Set 1 (Ma)... : Arithmetic mean for Set 2 (Ma)... : Retention (%)... : Supplementary information: Report No.: SYBH(A) age 17 of 19

19 Safety Test Report of T48200A Security Level: Internal Use Only 8.2 TABLE: Resistance to ultra-violet radiation 8.2b) Flexural strength test (ISO 178) N/A Material identification (manufacturer, type designation)... : Shape and dimensions of test samples... : Conditioning for Set 1 of samples... : Conditioning for Set 2 of samples (including Annex C)... : Test conditions (T C, RH %)... : Set 1 (without Annex C conditioning) Set 2 (after Annex C conditioning) Test sample # Flexural strength (Ma) Test sample # Flexural strength (Ma) Arithmetic mean for Set 1 (Ma)... : Arithmetic mean for Set 2 (Ma)... : Retention (%)... : Supplementary information: Report No.: SYBH(A) age 18 of 19

20 Safety Test Report of T48200A Security Level: Internal Use Only 8.2 TABLE: Resistance to ultra-violet radiation 8.2c) Charpy impact test (ISO 179) - unnotched N/A Material identification (manufacturer, type designation)... : Shape and dimensions of test samples... : Conditioning for Set 1 of samples... : Conditioning for Set 2 of samples (including Annex C)... : Test method (according to Tables 2 and 3 of ISO 179)... : Test conditions (T C, RH %)... : Set 1 (without Annex C conditioning) Set 2 (after Annex C conditioning) Test sample # Charpy impact strength (kj/m 2 ) Test sample # Charpy impact strength (kj/m 2 ) Arithmetic mean for Set 1 (kj/m 2 )... : Arithmetic mean for Set 2 (kj/m 2 )... : Retention (%)... : Supplementary information: Report No.: SYBH(A) age 19 of 19

21 Attachment No. 1 hotographs Attachment contains (Total 24 ages including this Cover age, one photo means one page) Supplement file name hoto-01 hoto-02 hoto-03 hoto-04 hoto-05 hoto-06 hoto-07 hoto-08 hoto-09 hoto-10 hoto-11 hoto-12 hoto-13 hoto-14 hoto-15 hoto-16 hoto-17 hoto-18 hoto-19 Description Front view of T48200A-D15A1 Side view of T48200A-D15A1 Front view with door open of T48200A-D15A1 Front view of T48200A-H15A5 Side view of T48200A-H15A5 Front view with door open of T48200A-H15A5 Front view of T48200E-D09A1 Rear view of T48200E-D09A1 Front view with door open of T48200E-D09A1 Front view of T48200E-H09A1 Rear view of T48200E-H09A1 Front view with door open of T48200E-H09A1 Grounding bus,symbol and earthing condutor Warning label-1 Warning label-2 Warning label-3 Front, side and top view for SU with model No. R4850N1 Rear, side and bottom view for SU with model No. R4850N1 Front, side and top view for SU with model No. R4850G1 age 1 of 24

22 hoto-20 hoto-21 hoto-22 Rear view for SU with model No. R4850G1 Front, side and top view for SMU02B Rear, side and bottom view for SMU02B age 2 of 24

23 hoto-01:front view of T48200A-D15A1 age 3 of 24

24 hoto-02:side view of T48200A-D15A1 age 4 of 24

25 hoto-03:front view with door open of T48200A-D15A1 age 5 of 24

26 hoto-04: Front view of T48200A-H15A5 age 6 of 24

27 hoto-05:side view of T48200A-H15A5 age 7 of 24

28 hoto-06:front view with door open of T48200A-H15A5 age 8 of 24

29 hoto-07:side view of T48200E-D09A1 age 9 of 24

30 hoto-08:rear view of T48200E-D09A1 age 10 of 24

31 hoto-09:front view with door open of T48200E-D09A1 age 11 of 24

32 hoto-10:front view of T48200E-H09A1 age 12 of 24

33 hoto-11:rear view of T48200E-H09A1 age 13 of 24

34 hoto-12:front view with door open of T48200E-H09A1 age 14 of 24

35 hoto-13:grounding bus,symbol and earthing conductor age 15 of 24

36 hoto-14:warning label-1 age 16 of 24

37 hoto-15:warning label-2 age 17 of 24

38 hoto-16:warning label-3 age 18 of 24

39 hoto-17:front, side and top view for SU with model No. R4850N1 age 19 of 24

40 hoto-18:rear, side and bottom view for SU with model No. R4850N1 age 20 of 24

41 hoto-19:front, side and top view for SU with model No. R4850G1 age 21 of 24

42 hoto-20: Rear view for SU with model No. R4850G1 age 22 of 24

43 hoto-21:front, side and top view for SMU02B age 23 of 24

44 hoto-22:rear, side and bottom view for SMU02B END age 24 of 24