DARIUSZ MIKIELEWICZ. Full Professor, DSc, PhD, MSc

Size: px
Start display at page:

Download "DARIUSZ MIKIELEWICZ. Full Professor, DSc, PhD, MSc"

Transcription

1 DARIUSZ MIKIELEWICZ Full Professor, DSc, PhD, MSc Personal data Born on 06 February 1967 r. in Gdańsk, wife Anna pharmacist, daughter Karolina (22) student of Pharmacy at Gdańsk University of Medicine, daughter Marta (20) student of Geodesy and Civil Engineering at GUT, son Piotr (12); Study experience Professional career MSc Faculty of Machine Construction, Gdańsk University of Technology, course mechanical engineering, profile machines and systems for energy conversion, specialisation refrigeration ( ); PhD - University of Manchester, Department of Nuclear and Mechanical Engineering ( ); DSc Gdańsk University of Technology, Faculty of Mechanical Engineering (2002); Professor President of Poland (2010); Nuclear Electric plc software engineer ( ); Institute of Fluid Flow Machinery Polish Academy of Sciences: specialist ( ); ( ), full professor ( ); Gdańsk University of Technology: assistant professor ( ); associate professor ( ); full professor (since 2012); Areas of expertise Scientific achievements field: technical sciences; disciplines: construction and operation of machinery, power engineering; area: thermodynamics and heat transfer, heat technology, energy systems; number of published works over 270 (including 7 monographs, 9 chapters in monographs, 20 JCR papers, over 50 papers in journals, over 100 citations from Web of Science); supervisor in 9 completed doctoral studies and 4 undergoing studies, tutor of subsequent 2 persons from the doctorate course); head of 11 KBN, MNiSW, NCN, 7FP projects; reviewer in 6 scientific journal from the JCR list, of over 20 research projects, and 19 PhD dissertations, 3 DSc and 1 application for the professor title; Selected participation to scientific bodies member of the Committee of Thermodynamics and Combustion of Polish Academy of Sciences (from 2007) Member of the Presidium (since 2016); member of the Committee for Energy Problems in Power Engineering at the Presidium of PAS (since 2015); Educational activity Lectures in: heat transfer, classical and irreversible thermodynamics, two-phase flows, computational methods in heat and fluid flow (all lectures in Polish and English); Organisation of the course Energy Technology, presently coordinator; Organisation of the specialisation in English: International Design Engineer; International collaboration with Sheffield University, Linnaeus University, Växjö and

2 Fachhochschule Lübeck; Preparation of the procedure for Double Diploma with Linnaeus University; Functions Management activity Awards and distinctions Dean of Faculty of Mechanical Engineering, from 2016 Head of Department of Energy and Industrial Apparatus, since 2012; Vice Dean for Education ( ); Member of Senate Commission for Education, ( ); Member of Senate Commission for Budget, ; Main actor in preparation of the application for the rights to convey the PhD in Power Engineering; Editor-in-Chief of Archives of Thermodynamics (since 2015); Member of Editorial Boards of: Journal of Computational & Applied Research in Mechanical Engineering, Refrigeration and Air-Conditioning Technology; Chairman of the 53rd European Two-Phase Flow Group Meeting in 2017; Representative of GUT in Pomeranian Platform of Energy Technologies, since 2010; Representative of Poland in European-Japanese Two-Phase Flow Group Meetings, 2009, 2012, 2015; Member of Scientific Committees of several cyclic conferences; Member of the Board of Experts of the National Centre for Science (since 2011); Award of the Chairman of Polish Academy of Sciences, 2003; Award of the Prime Minister of Poland, 1995; Rector Awards for scientific achievements: I degree (1), II degree (10) and III degree (5); Rector Awards for didactic achievements: I degree (3), II degree (6), III degree (4); Silver Cross of Merit, 2003; Medal of National Education, 2006; Selected publications Monographs: 1. Mikielewicz D., Wajs J.: Selected problems of designing microjet heat exchangers, Gdańsk, 2015 (in Polish). 2. Mikielewicz D., Selected Aspects of Thermal-Hydraulics Modelling in Two-Phase Flows with Phase Change in Minichannels, Frontiers and Progress in Multiphase Flow I, Springer Briefs, no. 12, 1-54, Mikielewicz J., Cieśliński J., Mikielewicz D., State and perspectives for the development of technologies of renewable sources of energy, PAN Warszawska Drukarnia Naukowa, Warszawa, Mikielewicz D., Mikielewicz J., Ihnatowicz E., Muszyński T., Wajs J., Rybiński W., Selected aspects of design and investigations of heat exchangers for domestic ORC micro CHP, IMP PAN Publishers, Gdańsk, Mikielewicz J., Mikielewicz D., Ihnatowicz E., Kaczmarczyk T., Matysko R., Wajs J., Bykuć S., Rybiński W., ORC thermodynamical cycles of domestic micro CHP, IMP PAN Publishers, Gdańsk, Mikielewicz D., Boiling and condensation in flow in conventional channel and minichannels, Gdańsk University of Technology Publishers, Mikielewicz J., Mikielewicz D., Evaporation and condensation. Encyclopedia of life support systems (EOLSS) [online]. Eolss Publ., (in Theme Title: Chemical

3 Engineering and Chemical Process Technology / eds. R. Pohorecki, J. Bridgwater [et al.]). - S. [21] : Tryb dostępu: http: // 8. Mikielewicz J., Mikielewicz D., Refrigeration, Encyclopedia of life support systems (EOLSS) [online]. Eolss Publ., (in Theme Title: Chemical Engineering and Chemical Process Technology / eds. R. Pohorecki, J. Bridgwater [et al.]). - S. [12]: Tryb dostępu: http: // 9. Mikielewicz D., Mikielewicz J., Surface cooling by means of axisymmetrical liquid jets. Gdańsk University of Technology Publishers, Mikielewicz D., Modelling of momentum and heat transfer in two-phase bubbly flow, Gdańsk University of Technology Publishers, Series: Monographs 29, Gdańsk List of publications in JCR 1. Mikielewicz J., Mikielewicz D., A simplified energy dissipation based model of heat transfer for subcooled flow boiling, Int. J. of Heat and Mass Transfer, po recenzjach, zaakceptowane do druku, Mikielewicz D., Wajs J., Andrzejczyk R., Klugmann M., Pressure drop of HFE7000 and HFE7100 during flow condensation in minichannels, Int. J. of Refrigeration, 68, Mikielewicz D., Andrzejczyk R., Jakubowska B., Mikielewicz J., Comparative study of heat transfer and pressure drop during flow boiling and flow condensation in minichannels, Heat Transfer Engineering, vol. 37(13-14), , Muszyński T., Mikielewicz D., Comparison of heat transfer characteristics in surface cooling with boiling microjets of water, ethanol and HFE7100, Applied Thermal Eng, 93, , Mikielewicz D., Wajs J., Ziółkowski P., Mikielewicz J., Utilisation of waste heat from the power plant by use of the ORC aided with bleed steam and extra source of heat, Energy, 97, 11-19, Wajs J., Mikielewicz D., Influence of metallic porous microlayer on pressure drop and heat transfer of stainless steel plate heat exchanger, Applied Thermal Engineering, 93, , Mikielewicz D., Mikielewicz J., Analytical method for calculation of heat source temperature drop for the Organic Rankine Cycle application, Applied Thermal Engineering, 63, , Mikielewicz D., Klugmann M., Wajs J.: Flow boiling intensification in minichannels by means of mechanical flow turbulising inserts, Int. Journal of Thermal Sciences, Vol. 65, 79-91, Mikielewicz D., Wajs J., Gliński M., Zrooga A.: Experimental investigation of dryout of SES36, R134a, R123 and ethanol in vertical small diameter tubes, Exp. Th. and Fluid Sci., 44, , Mikielewicz Dariusz, Stąsiek Adam, Jewartowski Marcin, Stąsiek Jan, Measurements of heat transfer enhanced by the use of transverse vortex generators, Applied Thermal Eng., Vol. 49, 61-72, Mikielewicz D., Klugmann M., Wajs J., Exp. investigation of M-shape heat transfer coefficient distribution of R123 flow boiling in small diameter tubes, Heat Transfer Eng., , Mikielewicz D., Mikielewicz J., A common method for calculation of flow boiling and flow condensation heat transfer coefficients in minichannels with account of nonadiabatic effects, Heat Tran. Eng., 32, , 2011.

4 13. Mikielewicz J., Mikielewicz D., A thermodynamic criterion for selection of working fluid for subcritical and supercritical domestic micro CHP, Applied Thermal Engineering, Vol. 30, , Mikielewicz J., Mikielewicz D., Gumkowski S., A model of liquid film breakdown formed due to impingement of a two-phase jet on a horizontal surface, Int. J. of Heat and Mass Transfer. Vol. 53, , Mikielewicz D., Mikielewicz J., Turbulent heat transfer in thin liquid films at low and high heat fluxes, Journal of Theoretical and Applied Mechanics, Vol. 45(3), , Mikielewicz J., Mikielewicz D. A simple model of circular hydraulic pump, International Journal of Heat and Mass Transfer, Vol. 52(1), 17-21, Mikielewicz D., A new method for determination of flow boiling heat transfer coefficient in conventional diameter channels and minichannels, J. of Heat Transfer Eng., Vol. 31, , Mikielewicz D., Mikielewicz J., Białas-Tesmar J., Improved semi-empirical method for determination of heat transfer coefficient in flow boiling in conventional and small diameter tubes, International Journal of Heat and Mass Transfer, Vol. 50(19-20), , Mikielewicz D., Hydrodynamics and heat transfer in bubbly two-phase flows, Int. J. of Heat Mass Transfer, 46, , Mikielewicz D., Shehata A.M., Jackson J.D, McEligot D.M., Temperature, velocity and mean turbulence structure in strongly-heated internal gas flows. Comparison of numerical predictions with data, Int. J. of Heat Mass Transfer, Vol. 45(21), , List of publications in other journals 1. Mikielewicz D., Jakubowska B., Prediction of flow boiling heat transfer coefficient for carbon dioxide in minichannels and conventional channels, Archives of Thermodynamics, Vol. 37(2), No89 106, Wajs J., Mikielewicz D., Fornalik-Wajs E., Bajor M., Recuperator with microjet technology as a proposal for heat recovery from low-temperature sources. Archives of Thermodynamics, vol. 36(4), 49-64, Mikielewicz D., Andrzejczyk R., Mikielewicz J., Pressure drop of HFE7000 and HFE7100 in flow condensation in minichannels with account of non-adiabatic effects, Eurotherm Seminar 101 Transport Phenomena in Multiphase Systems, 2014, 4. Mikielewicz D., Andrzejczyk R., Jakubowska B., Mikielewicz J., Comparative study of heat transfer and pressure drop during flow boiling and flow condensation in minichannels, Archives of Thermodynamics, vol. 35(2), 17 37, Mikielewicz D., Błauciak K., Investigation of the influence of capillary effect on operation of the loop heat pipe, Archives of Thermodynamics, vol. 35(3), 59-80, Mikielewicz D., Jakubowska B.: Prediction of flow boiling heat transfer data for R134a, R600a and R290 in minichannels, Archives of Thermodynamics, vol. 35(4), , Mikielewicz D., Wajs J., Mikielewicz J.: Gas boiler as a heat source for the domestic micro- CHP, Journal of Power Technologies, vol. 94(4), , Mikielewicz D., Mikielewicz J., On the efficient use of a low temperature heat source by the organic Rankine cycle, Archives of Thermodynamics, Vol. 34(3), 61-74, Ziółkowski P., Mikielewicz D., Mikielewicz J., Increase of power and efficiency of the 900 MWe supercitical power plant through incorporation of the ORC, Archives of Thermodynamics, Vol. 34(4), 51-72, Wajs J., Mikielewicz D., Effect of Surface Roughness on Thermal-hydraulic Characteristics of Plate Heat Exchanger, Key Engineering Materials Vol. 597, 63-74, 2014.

5 11. Mikielewicz D., Wajs J., Żmuda E., Organic Rankine Cycle as Bottoming Cycle to a Combined Brayton and Clausius - Rankine Cycle, Key Engineering Materials, Vol. 597, 87-98, Mikielewicz D., Muszyński T., Mikielewicz J., Model of heat transfer in the stagnation point of rapidly evaporating microjet, Archives of Thermodynamics, Vol. 33(1), , Mikielewicz J., Mikielewicz D., Optimal boiling temperature for ORC installation, Archives of Thermodynamics, Vol. 33(3), 27-37, Mikielewicz J., Mikielewicz D., Thermal-hydraulic issues of flow boiling and condensation in organic Rankine cycle heat exchangers, Archives of Thermodynamics, vol. 33(1), 41-66, Mikielewicz D., Andrzejczyk R., Comparative study of flow condensation in conventional and small diameter tubes, Archives of Thermodynamics, Vol. 33(2), 67-83, Mikielewicz D., Mikielewicz J., Utilisation of bleed steam heat to increase the upper heat source temperature in low-temperature ORC, Archives of Thermodynamics, vol. 32(3), 57-70, Mikielewicz D., Glinski M., Wajs J., Experimental and theoretical study of dryout in annular flow in small diameter channels, Archives of Thermodynamics. Vol. 32(1), , Mikielewicz D., Mikielewicz J., Utilisation of bleed steam heat to increase the upper heat source temperature in low-temperature ORC, Archives of Thermodynamics, vol. 32(3), Mikielewicz D., Mikielewicz J., Wajs J., Experiences from operation of different expansion devices for application in domestic micro CHP, Archives of Thermodynamics, Vol. 31(4), 3-13, Mikielewicz D., Muszyński T., Experimental and theoretical study of surface cooling using a single microjet, Transactions of the Institute of Fluid-Flow Machinery, No. 122, , Mikielewicz D., Klugmann M., A study of flow boiling heat transfer in minichannels, Archives of Thermodynamics, Vol. 29(2),73-84, Mikielewicz D., Mikielewicz J., Cogenerative micro power plants - a new direction for development of power engineering?, Archives of Thermodynamics, Vol. 29(4), , Mikielewicz D., Mikielewicz J., Wajs J., Glinski M., Modelling of dryout process in an annular flow, Heat Transfer Research. - Vol. 39(7), , Mikielewicz D., Mikielewicz J., Barnik D., Modelling of nucleate boiling heat transfer in a film formed by an impinging jet, Journal of Heat Transfer Research, Vol. 38(4), Mikielewicz D., Wajs J., Improved model of void fraction distribution in two-phase flow in the boundary layer, Archives of Thermodynamics, Vol. 27(3), , Mikielewicz D., Mikielewicz J., Białas-Tesmar J., A semi-empirical method for calculation of heat transfer coefficient in flow boiling for conventional tubes and minichannels, Archives of Thermodynamics. - Vol. 27(4), 13-22, Mikielewicz D., Mikielewicz J., Modelling of heat transfer in flow boiling, Archives of Thermodynamics, vol. 26(1), 53-64, Mikielewicz D. Mikielewicz J., Modelling of Flow Process in Small Diameter Tubes. Strojniški Vestnik, Journal of Mechanical Engineering. Vol. 51(7-8), , Mikielewicz D., Wajs J.: Modelling of vertical wall influence on the single bubble motion. Strojniski vestnik, Journal of Mechanical Engineering, vol. 51(7-8), Mikielewicz D., Modelling of heat transfer in bubbly flow in the turbulent boundary layer, Archives of Thermodynamics, Vol. 22(1-2), 33-49, Mikielewicz D., Universal velocity profile for bubbly flow in the boundary layer, Archives of Thermodynamics, Vol. 21(3-4), , 2000.

6 32. Mikielewicz J., Mikielewicz D., Analytical model of heat transfer in films on rotating discs, Archives of Thermodynamics, Vol. 20(3-4), , Mikielewicz D., Ihnatowicz E., Mikielewicz J., Influence of condensation on temperature measurements in the case of a dew point probe, Archives of Thermodynamics Vol. 19(1-2), , Mikielewicz J., Mikielewicz D., Analysis of the influence of the design parameters of the probe for the dew-point temperature measurements on its static and dynamic characteristics, Trans. IFFM, Vol. 104, , Mikielewicz J., Mikielewicz D., Heat transfer of two-phase spray impinging on a hot surface, Archives of Thermodynamics, Vol. 18(3-4), 61-79, Mikielewicz D., Modelling of a buoyancy-influenced flow of supercritical pressure helium in heated vertical pipes, Trans. IFFM, 3-22, Vol. 102, Mikielewicz D., An improved low-reynolds number k~ model for flows in pipes, Trans. IFFM, Vol. 102, 41-64, Mikielewicz J., Mikielewicz D., Semi-analytical model of spray impingement on a flat surface, Trans. IFFM, Vol. 103, 15-28, Mikielewicz J., Mikielewicz D., Influence of plate thermal parameters on non-stationary temperature measurements, Trans. IFFM, Vol. 103, 51-62, Mikielewicz D., Ihnatowicz E., Turbulence modelling using various turbulent Prandtl number models, Trans. IFFM, Vol. 100, , Mikielewicz D., Modelling of a vertical pipe flow in ascending flow of air, Trans. IFFM, Vol. 101, , Mikielewicz J., Mikielewicz D., Modelling of wavy liquid film flow, Archives of Thermodynamics, Vol. 17(1-2), , 1996.

HEAT TRANSFER CHARACTERISTICS OF HYBRID MICROJET MICROCHANNEL COOLING MODULE

HEAT TRANSFER CHARACTERISTICS OF HYBRID MICROJET MICROCHANNEL COOLING MODULE HEAT TRANSFER CHARACTERISTICS OF HYBRID MICROJET MICROCHANNEL COOLING MODULE Tomasz Muszynski 1, Rafal Andrzejczyk 1 1: Gdansk University of Technology, Faculty of Mechanical Engineering, Department of

More information

Mohammad Abdulaziz Joma'h AL-Tarawneh, Ph.D.

Mohammad Abdulaziz Joma'h AL-Tarawneh, Ph.D. PERSONAL DETAILS Mohammad Abdulaziz Joma'h AL-Tarawneh, Ph.D. Place & date of birth: AL-Karak/ Husainieh, 1963 Marital status: Married Nationality: Jordanian Health: Excellent Applied Science University

More information

Ayelet Goldstein October 2015 CURRICULUM VITAE

Ayelet Goldstein October 2015 CURRICULUM VITAE Ayelet Goldstein October 2015 1. Personal Details CURRICULUM VITAE Work Address: of Mechanical Engineering, ORT BRAUDE P.O.Box 78, Karmiel 2161002, Israel Office Telephone Number 04-9901767 Electronic

More information

HEAT TRANSFER IN POROUS SURFACES OF EVAPORATORS OF HEAT MACHINES AND DEVICES

HEAT TRANSFER IN POROUS SURFACES OF EVAPORATORS OF HEAT MACHINES AND DEVICES VI Minsk International Seminar Heat Pipes, Heat Pumps, Refrigerators HEAT TRANSFER IN POROUS SURFACES OF EVAPORATORS OF HEAT MACHINES AND DEVICES Leonard L. Vasiliev 1, Alexander S. Zhuravlyov 2, Alexander

More information

EXPERIMENTAL INVESTIGATION OF A RADIAL MICROTURBINE IN ORGANIC RANKINE CYCLE SYSTEM WITH HFE7100 AS WORKING FLUID

EXPERIMENTAL INVESTIGATION OF A RADIAL MICROTURBINE IN ORGANIC RANKINE CYCLE SYSTEM WITH HFE7100 AS WORKING FLUID EXPERIMENTAL INVESTIGATION OF A RADIAL MICROTURBINE IN ORGANIC RANKINE CYCLE SYSTEM WITH HFE7100 AS WORKING FLUID Tomasz Z. Kaczmarczyk, Grzegorz Żywica, Eugeniusz Ihnatowicz e-mail: tkaczmarczyk@imp.gda.pl

More information

Course syllabus Fluid Mechanics

Course syllabus Fluid Mechanics Course syllabus Fluid Mechanics COURSE DETAILS Type of study programme Study programme Course title Course code ECTS (Number of credits allocated) Course status Year of study Course Web site Total lesson

More information

Critical Heat Flux Criteria and Departure from Nucleate Boiling Phenomena during Nuclear Power Reactor Operations. Author: Anthony Muldrow

Critical Heat Flux Criteria and Departure from Nucleate Boiling Phenomena during Nuclear Power Reactor Operations. Author: Anthony Muldrow Critical Heat Flux Criteria and Departure from Nucleate Boiling Phenomena during Nuclear Power Reactor Operations Author: Anthony Muldrow Abstract Pressurized water nuclear power reactors are designed

More information

Chapter 6 THE SECOND LAW OF THERMODYNAMICS

Chapter 6 THE SECOND LAW OF THERMODYNAMICS Chapter 6 THE SECOND LAW OF THERMODYNAMICS INTRODUCTION TO THE SECOND LAW A cup of hot coffee does not get hotter in a cooler room. Transferring heat to a paddle wheel will not cause it to rotate. Transferring

More information

Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdańsk. Scientific competences and research potential.

Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdańsk. Scientific competences and research potential. 1000- YEARS OF GDAŃSK Institute of Fluid Flow Machinery, Polish Academy of Sciences, Gdańsk Renewable Energy Sources. Research Programs leading to distributed prosumer/citizen Power Engineering Scientific

More information

Heat transfer intensification in heat exchangers of air source heat pumps

Heat transfer intensification in heat exchangers of air source heat pumps Heat transfer intensification in heat exchangers of air source heat pumps Dariusz Mikielewicz, Jarosław Mikielewicz, Piotr Doerffer 1. Introduction Air source heat pumps use air as a heat source to evaporate

More information

Mitja Uršič, Matjaž Leskovar, Renaud Meignen, Stephane Picchi, Julie-Anne Zambaux. Fuel coolant interaction modelling in sodium cooled fast reactors

Mitja Uršič, Matjaž Leskovar, Renaud Meignen, Stephane Picchi, Julie-Anne Zambaux. Fuel coolant interaction modelling in sodium cooled fast reactors Mitja Uršič, Matjaž Leskovar, Renaud Meignen, Stephane Picchi, Julie-Anne Zambaux Fuel coolant interaction modelling in sodium cooled fast reactors Outline Introduction Premixing phase Explosion phase

More information

ENHANCED FILMWISE CONDENSATION WITH THIN POROUS COATING

ENHANCED FILMWISE CONDENSATION WITH THIN POROUS COATING Proceedings of the First Pacific Rim Thermal Engineering Conference, PRTEC March 13-17, 2016, Hawaii's Big Island, USA PRTEC-14728 ENHANCED FILMWISE CONDENSATION WITH THIN POROUS COATING Ying Zheng *,

More information

FLOW PATTERN IN CO 2 -LUBURICANT TWO-PHASE FLOW AT SUPERCRITICAL PRESSURE

FLOW PATTERN IN CO 2 -LUBURICANT TWO-PHASE FLOW AT SUPERCRITICAL PRESSURE ISTP-16, 2005, PRAGUE 16 TH INTERNATIONAL SYMPOSIUM ON TRANSPORT PHENOMENA FLOW PATTERN IN CO 2 -LUBURICANT TWO-PHASE FLOW AT SUPERCRITICAL PRESSURE Koji Mori and Kunihiro Shimoki Osaka Electro-Communication

More information

Splat formation in plasma-spray coating process*

Splat formation in plasma-spray coating process* Pure Appl. Chem., Vol. 74, No. 3, pp. 441 445, 2002. 2002 IUPAC Splat formation in plasma-spray coating process* Javad Mostaghimi and Sanjeev Chandra Centre for Advanced Coating Technologies, University

More information

UNIVERSITY OF ENGINEERING AND TECHNOLOGY TAXILA CIVIL ENGINEERING DEPARTMENT OUTCOME BASED EDUCATION CE-308: FLUID MECHANICS II

UNIVERSITY OF ENGINEERING AND TECHNOLOGY TAXILA CIVIL ENGINEERING DEPARTMENT OUTCOME BASED EDUCATION CE-308: FLUID MECHANICS II UNIVERSITY OF ENGINEERING AND TECHNOLOGY TAXILA CIVIL ENGINEERING DEPARTMENT OUTCOME BASED EDUCATION CE-308: FLUID MECHANICS II Course Contents: Fluid flow in pipes Reynold's number and its significance.

More information

Piotr Lampart. New IMP PAN research - renewable energy technologies

Piotr Lampart. New IMP PAN research - renewable energy technologies ERCOFTAC Spring Festival 2011 Piotr Lampart New IMP PAN research - renewable energy technologies Gdańsk, 12 May 2011 SAMPLE IMP PAN / BKEE PROJECTS 1 2 3 4 5 Model agro-energy complexes in distributed

More information

EXPERIMENTAL INVESTIGATION OF THE ORC SYSTEM IN A COGENERATIVE DOMESTIC POWER PLANT WITH A MICROTURBINE AND AN EXPANSION VALVE

EXPERIMENTAL INVESTIGATION OF THE ORC SYSTEM IN A COGENERATIVE DOMESTIC POWER PLANT WITH A MICROTURBINE AND AN EXPANSION VALVE EXPERIMENTAL INVESTIGATION OF THE ORC SYSTEM IN A COGENERATIVE DOMESTIC POWER PLANT WITH A MICROTURBINE AND AN EXPANSION VALVE Tomasz Z. Kaczmarczyk, Eugeniusz Ihnatowicz, Sebastian Bykuć, Grzegorz Żywica,

More information

CURRICULUM VITAE MASSIMILIANO RENZI

CURRICULUM VITAE MASSIMILIANO RENZI CURRICULUM VITAE MASSIMILIANO RENZI Assistant Professor at the Faculty of Science and Technology Free University of Bozen/Bolzano Tel. +39 0471-017112 Email: Massimiliano.renzi@unibz.it Affiliation Free

More information

Investigations Of Low Pressure Two-Phase Steam- Water Injector

Investigations Of Low Pressure Two-Phase Steam- Water Injector Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 206 Investigations Of Low Pressure Two-Phase Steam- Water Injector Roman Kwidzinski

More information

Design and distribution of air nozzles in the biomass boiler assembly

Design and distribution of air nozzles in the biomass boiler assembly TRANSACTIONS OF THE INSTITUTE OF FLUID-FLOW MACHINERY No. 125, 2013, 13 28 KAROL RONEWICZ, TOMASZ TURZYŃSKI, DARIUSZ KARDAŚ Design and distribution of air nozzles in the biomass boiler assembly The Szewalski

More information

Methodology of Modeling and Comparing the Use of Direct Air-Cooling for a Supercritical Carbon Dioxide Brayton Cycle and a Steam Rankine Cycle

Methodology of Modeling and Comparing the Use of Direct Air-Cooling for a Supercritical Carbon Dioxide Brayton Cycle and a Steam Rankine Cycle The 5 th International Symposium Supercritical CO2 Power Cycles March 28-31, 2016, San Antonio, Texas Methodology of Modeling and Comparing the Use of Direct Air-Cooling for a Supercritical Carbon Dioxide

More information

Second Law of Thermodynamics

Second Law of Thermodynamics Second Law of Thermodynamics Content Heat engine and its efficiency. Reversible and irreversible processes. The Carnot machine. Kelvin Planck Statement. Refrigerator and Coefficient of Performance. Statement

More information

Chapter 6 THE SECOND LAW OF THERMODYNAMICS

Chapter 6 THE SECOND LAW OF THERMODYNAMICS Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 6 THE SECOND LAW OF THERMODYNAMICS Copyright The McGraw-Hill Companies, Inc. Permission

More information

Power cycle development

Power cycle development Power cycle development Steam cycles dominant for >300 yrs, mostly Rankine Gas Brayton cycles catching up last 50 years Organic Rankine Cycles (ORC) relatively recent 2 Why a new power cycle? Steam Good

More information

Chapter 8. Vapor Power Systems

Chapter 8. Vapor Power Systems Chapter 8 Vapor Power Systems Introducing Power Generation To meet our national power needs there are challenges related to Declining economically recoverable supplies of nonrenewable energy resources.

More information

SUPERCRITICAL HEAT TRANSFER AND HEAT EXCHANGER DESIGN FOR ORGANIC RANKINE APPLICATION

SUPERCRITICAL HEAT TRANSFER AND HEAT EXCHANGER DESIGN FOR ORGANIC RANKINE APPLICATION SUPERCRITICAL HEAT TRANSFER AND HEAT EXCHANGER DESIGN FOR ORGANIC RANKINE APPLICATION Lazova M* Kaya A, Huisseune H and De Paepe M *Author for correspondence Department of Flow, Heat and Combustion Mechanics,

More information

CURRICULUM VITAE. Name: Abdel Hamid Basheer Mohammed Helali Job Title: Associate Professor Date of Birth: 22 Oct., 1951

CURRICULUM VITAE. Name: Abdel Hamid Basheer Mohammed Helali Job Title: Associate Professor Date of Birth: 22 Oct., 1951 CURRICULUM VITAE Faculty of Engineering El-Mattaria - Cairo 1. PERSONAL DATA Name: Abdel Hamid Basheer Mohammed Helali Job Title: Associate Professor Date of Birth: 22 Oct., 1951 Place of birth Aswan Egypt

More information

Dr Ibrahim Khalil Rajab

Dr Ibrahim Khalil Rajab P.O. Box 10099 Jubail Industrial College Jubail Industrial City 31961 Kingdom of Saudi Arabia Mobile:(00966) 0502287486 e-mail: rajab.ike@gmail.com Web: rajab.ike.googlepages.com Dr Ibrahim Khalil Rajab

More information

Ph. d, Faculty of Process and System Engineering, Otto-von-Guericke University, Magdeburg,

Ph. d, Faculty of Process and System Engineering, Otto-von-Guericke University, Magdeburg, Essam Elgendy Mechanical Power Engineering Department Faculty of Engineering at El-Mattaria P.O.11718 (Masaken El-Helmia), Cairo, Egypt Phone: (002) 011-48491088 Fax: (002) 02-26332398 Email: elgenady@hotmail.com

More information

FEE, CTU in Prague Power Engineering 2 (BE5B15EN2) Exercise 3

FEE, CTU in Prague Power Engineering 2 (BE5B15EN2) Exercise 3 Example 1: How is the applied heat for 1 kg of water steam at constant pressure p = 1.47 MPa, if the dryness of wet water is increased from x 1 = 0.8 to x 2 = 0.96? Dryness of wet steam the ratio of steam

More information

A turbine based domestic micro ORC system

A turbine based domestic micro ORC system A turbine based domestic micro ORC system Piotr Klonowicz, Łukasz Witanowski, Łukasz Jędrzejewski, Tomasz Suchocki, Piotr Lampart The Szewalski Institute of Fluid-Flow Machinery Polish Academy of Sciences

More information

Chapter 6: Stationary Combustion Systems

Chapter 6: Stationary Combustion Systems Chapter 6: Stationary Combustion Systems Figure 6-1. Schematic of components of coal-fired electric plant, with conversion of coal to electricity via boiler, turbine, and generator US Energy Sources 2004

More information

Electrical Energy Production from the Waste Heat Released the Gas Turbine Beaings Cooled with Oil using the Organic Rankine Cycle

Electrical Energy Production from the Waste Heat Released the Gas Turbine Beaings Cooled with Oil using the Organic Rankine Cycle ISBN 978-81-934174-2-3 6th International Conference on Engineering, Science, Technology and Industrial Applications (ESTIA-2017) Istanbul (Turkey), Sept. 8-10, 2017 Electrical Energy Production from the

More information

TransPacific Energy Advantage: Case Studies

TransPacific Energy Advantage: Case Studies TransPacific Energy Advantage: Case Studies Typical Power Plant TPE-ORC 0.60 KWh ORC 2.3 KWh LP steam 0.35 KWh 30% (maximum) 2.05 KWh CHP Typical Power Generated 1.1 KWh Typical Power Wasted 2.31 KWh Typical

More information

Smart Integration of Thermal Management Systems for Electronics Cooling

Smart Integration of Thermal Management Systems for Electronics Cooling Smart Integration of Thermal Management Systems for Electronics Cooling Dr. Ir. Wessel W. Wits, University of Twente, Faculty of Engineering Technology, Laboratory of Design, Production and Management,

More information

Exergy analysis of internal regeneration in supercritical cycles of ORC power plant

Exergy analysis of internal regeneration in supercritical cycles of ORC power plant archives of thermodynamics Vol. 33(2012), No. 3, 51 63 DOI: 10.2478/v10173-012-0017-9 Exergy analysis of internal regeneration in supercritical cycles of ORC power plant ALEKSANDRA BORSUKIEWICZ-GOZDUR

More information

Computational Fluid Dynamics for Reactor Design & Safety-Related Applications

Computational Fluid Dynamics for Reactor Design & Safety-Related Applications NSE Nuclear Science & Engineering at MIT science : systems : society Computational Fluid Dynamics for Reactor Design & Safety-Related Applications Massachusetts Institute of Technology Emilio Baglietto

More information

Chapter 1 STEAM CYCLES

Chapter 1 STEAM CYCLES Chapter 1 STEAM CYCLES Assoc. Prof. Dr. Mazlan Abdul Wahid Faculty of Mechanical Engineering Universiti Teknologi Malaysia www.fkm.utm.my/~mazlan 1 Chapter 1 STEAM CYCLES 1 Chapter Objectives To carry

More information

Effect of Bond Number on Thermophysical Properties of Working Fluid Used in Closed Loop Pulsating Heat Pipe: A Review

Effect of Bond Number on Thermophysical Properties of Working Fluid Used in Closed Loop Pulsating Heat Pipe: A Review Effect of Bond Number on Thermophysical Properties of Working Fluid Used in Closed Loop Pulsating Heat Pipe: A Review Roshan D. Bhagat 1, K. M. Watt 2 1 Student M.E. Thermal Engineering, Prof. Ram Meghe

More information

ANSYS, Inc. March 31, Phase Change Models in FLUENT

ANSYS, Inc. March 31, Phase Change Models in FLUENT 1 2016 ANSYS, Inc. March 31, 2016 Phase Change Models in FLUENT Phase Change Models in ANSYS FLUENT In ANSYS Fluent the following are available for modeling phase change Boiling models RPI Non equilibrium

More information

Lubrication-installation of screw engine applied in an Organic Rankine Cycle

Lubrication-installation of screw engine applied in an Organic Rankine Cycle Lubrication-installation of screw engine applied in an Organic Rankine Cycle Slawomir Smolen, Albrecht Eicke University of Applied Sciences Bremen, Faculty Nature & Engineering, Department of Mechanical

More information

Multiphase Flow Dynamics 4

Multiphase Flow Dynamics 4 Multiphase Flow Dynamics 4 Nuclear Thermal Hydraulics von Nikolay I Kolev 1. Auflage Multiphase Flow Dynamics 4 Kolev schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG Thematische

More information

R.A. Chaplin Chemical Engineering, University of New Brunswick, Canada

R.A. Chaplin Chemical Engineering, University of New Brunswick, Canada PRODUCTION OF POWER R.A. Chaplin Chemical Engineering, University of New Brunswick, Canada Keywords: Thermodynamic Cycles, Turbine Principles, Combined Cycles, Heat Rejection, Life Extension Contents 1.

More information

Void Fraction of CO2 and Ammonia in Multiport Aluminum Microchannel Tubes

Void Fraction of CO2 and Ammonia in Multiport Aluminum Microchannel Tubes Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 26 Void Fraction of CO2 and Ammonia in Multiport Aluminum Microchannel Tubes

More information

Problems in chapter 9 CB Thermodynamics

Problems in chapter 9 CB Thermodynamics Problems in chapter 9 CB Thermodynamics 9-82 Air is used as the working fluid in a simple ideal Brayton cycle that has a pressure ratio of 12, a compressor inlet temperature of 300 K, and a turbine inlet

More information

Comparison of micro gas turbine heat recovery systems using ORC and trans-critical CO 2 cycle focusing on off-design performance

Comparison of micro gas turbine heat recovery systems using ORC and trans-critical CO 2 cycle focusing on off-design performance Comparison of micro gas turbine heat recovery systems using ORC and trans-critical CO 2 cycle focusing on - performance IV International Seminar on ORC Power Systems September 13-15, 2017 Suk Young Yoon,

More information

Rankine cycle. Contents. Description

Rankine cycle. Contents. Description Page 1 of 7 Rankine cycle From Wikipedia, the free encyclopedia The Rankine cycle is a model that is used to predict the performance of steam turbine systems. The Rankine cycle is an idealized thermodynamic

More information

Visualization of pool boiling on plain micro-fins and micro- fins with sintered perforated foil

Visualization of pool boiling on plain micro-fins and micro- fins with sintered perforated foil Journal of Physics: Conference Series PAPER OPEN ACCESS Visualization of pool boiling on plain micro-fins and micro- fins with sintered perforated foil To cite this article: R Pastuszko and R Kaniowski

More information

Computational Modeling of Counter Flow Heat Exchanger for LMTD Analysis

Computational Modeling of Counter Flow Heat Exchanger for LMTD Analysis Computational Modeling of Counter Flow Heat Exchanger for LMTD Analysis Shuvam Mohanty 1, Shofique Uddin Ahmed 2 1, 2 Student, M. Tech, Department Of Mechanical Engineering, Amity University Gurgaon, Haryana

More information

PhD Research and Education in Nuclear Engineering at KTH. Henryk Anglart

PhD Research and Education in Nuclear Engineering at KTH. Henryk Anglart PhD Research and Education in Nuclear Engineering at KTH Henryk Anglart (henryk@kth.se) Sweden's leading university of technology Sweden's oldest and largest university of technology More than 11,000 full-time

More information

CFD Modelling and Analysis of Different Plate Heat Exchangers

CFD Modelling and Analysis of Different Plate Heat Exchangers CFD Modelling and Analysis of Different Plate Heat Exchangers Ahmed Y Taha Al-Zubaydi a *, Guang Hong b and W. John Dartnall c Faculty of Engineering and Information Technology, UTS, Sydney, Australia

More information

QUENCHING PERFORMANCE IN NANOFLUIDS AND NANOPARTICLES-DEPOSITED SURFACES

QUENCHING PERFORMANCE IN NANOFLUIDS AND NANOPARTICLES-DEPOSITED SURFACES QUENCHING PERFORMANCE IN NANOFLUIDS AND NANOPARTICLES-DEPOSITED SURFACES Kyung Mo Kim, In Cheol Bang School of Mechanical and Nuclear Engineering Ulsan National Institute of Science and Technology 50 UNIST-gil,

More information

Screw Engine as Expansion Machine Applied in an ORC- Test-Installation - the First Operating Experiences

Screw Engine as Expansion Machine Applied in an ORC- Test-Installation - the First Operating Experiences Screw Engine as Expansion Machine Applied in an ORC- Test-Installation - the First Operating Experiences Lubrication system for a screw machine in reverse rotation Dipl.-Ing. Albrecht Eicke, University

More information

High Heat-transfer Titanium Sheet-HEET - for Heat Exchangers

High Heat-transfer Titanium Sheet-HEET - for Heat Exchangers High Heat-transfer Titanium Sheet-HEET - for Heat Exchangers Keitaro TAMURA *1, Yoshio ITSUMI *1, Dr. Akio OKAMOTO *1, Dr. Hideto OYAMA *2, Dr. Hirofumi ARIMA *3, Dr. Yasuyuki IKEGAMI *3 *1 Titanium Plant,

More information

Secondary Systems: Steam System

Secondary Systems: Steam System Secondary Systems: Steam System K.S. Rajan Professor, School of Chemical & Biotechnology SASTRA University Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 10 Table of Contents 1 SECONDARY SYSTEM

More information

Design Features of Combined Cycle Systems

Design Features of Combined Cycle Systems Design Features of Combined Cycle Systems 1.0 Introduction As we have discussed in class, one of the largest irreversibilities associated with simple gas turbine cycles is the high temperature exhaust.

More information

Tube bundle s cooling by aqueous foam

Tube bundle s cooling by aqueous foam Computational Methods in Multiphase Flow V 445 Tube bundle s cooling by aqueous foam J. Gylys 1, S. Sinkunas 2, T. Zdankus 1, M. Gylys 1 & R. Maladauskas 2 1 Energy Technology Institute, Kaunas University

More information

THE EFFECT OF USING SMALL CYLINDRICAL ALUMINUM PIECES AS A PACKING MATERIAL ON THE DOUBLE PIPE HEAT EXCHANGER PERFORMANCE

THE EFFECT OF USING SMALL CYLINDRICAL ALUMINUM PIECES AS A PACKING MATERIAL ON THE DOUBLE PIPE HEAT EXCHANGER PERFORMANCE International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 1621 1631, Article ID: IJMET_09_13 163 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=

More information

Decentralized Biomass Power Production

Decentralized Biomass Power Production Decentralized Biomass Power Production by Dr. Eric Bibeau University of Manitoba (Alternative Energy Research) Biomass Energy II Heat and Power Workshop November 13, 2003 Activity at U of M biomass alternative

More information

CONFIGURATION OF MICRO-LAYER IN BOILING IN NARROW GAPS FOR WATER

CONFIGURATION OF MICRO-LAYER IN BOILING IN NARROW GAPS FOR WATER ISTP-16, 5, PRAGUE 16 TH INTERNATIONAL SYMPOSIUM ON TRANSPORT PHENOMENA CONFIGURATION OF MICRO-LAYER IN BOILING Yoshio UTAKA *, Yutaka TASAKI ** & Shuhei Okuda * * Division of Systems Research, Faculty

More information

EXPERIMENT FOR VERIFICATION OF GROUND SOURCE HEAT PUMP USING THE DIRECT EXPANSION METHOD

EXPERIMENT FOR VERIFICATION OF GROUND SOURCE HEAT PUMP USING THE DIRECT EXPANSION METHOD EXPERIMENT FOR VERIFICATION OF GROUND SOURCE HEAT PUMP USING THE DIRECT EXPANSION METHOD S. ISHIGURO 1 and T. TAKEDA 2 1 Graduate School of Medicine and Engineering, Univ. of Yamanashi, Takeda 4-3-11,

More information

Compound Heat Transfer Enhancement Methods To Increase Heat Exchanger Efficiency

Compound Heat Transfer Enhancement Methods To Increase Heat Exchanger Efficiency Compound Heat Transfer Enhancement Methods To Increase Heat Exchanger Efficiency David J. Kukulka State University of New York College at Buffalo USA kukulkdj@buffalostate.edu Rick Smith Vipertex Division

More information

THE SECOND LAW OF THERMODYNAMICS

THE SECOND LAW OF THERMODYNAMICS Fundamentals of Thermal-Fluid Sciences, 3rd Edition Yunus A. Cengel, Robert H. Turner, John M. Cimbala McGraw-Hill, 2008 THE SECOND LAW OF THERMODYNAMICS Mehmet Kanoglu Copyright The McGraw-Hill Companies,

More information

2. TECHNICAL DESCRIPTION OF THE PROJECT

2. TECHNICAL DESCRIPTION OF THE PROJECT 2. TECHNICAL DESCRIPTION OF THE PROJECT 2.1. What is a Combined Cycle Gas Turbine (CCGT) Plant? A CCGT power plant uses a cycle configuration of gas turbines, heat recovery steam generators (HRSGs) and

More information

NUCLEAR ENERGY MATERIALS AND REACTORS - Vol. II - Safety Of Boiling Water Reactors - Javier Ortiz-Villafuerte and Yassin A. Hassan

NUCLEAR ENERGY MATERIALS AND REACTORS - Vol. II - Safety Of Boiling Water Reactors - Javier Ortiz-Villafuerte and Yassin A. Hassan SAFETY OF BOILING WATER REACTORS Javier Ortiz-Villafuerte Departamento de Sistemas Nucleares, Instituto Nacional de Investigaciones Nucleares, Ocoyoacac, Estado de México, 52045, México. Department of

More information

Optimal Design and Thermodynamic Analysis of Gas Turbine and Carbon Dioxide Combined Cycles

Optimal Design and Thermodynamic Analysis of Gas Turbine and Carbon Dioxide Combined Cycles The 6th International Supercritical CO 2 Power Cycles Symposium March 27-29, 2018, Pittsburgh, Pennsylvania Optimal Design and Thermodynamic Analysis of Gas Turbine and Carbon Dioxide Combined Cycles Yue

More information

Stan Shire. Thermal Energy Theme Lead

Stan Shire. Thermal Energy Theme Lead Stan Shire Thermal Energy Theme Lead University of Warwick Thermal Energy Technology Laboratory Facilities and Expertise Stan Shire Associate Professor of Sustainable Energy Systems School of Engineering

More information

Design and Off-Design Analysis of an ORC Coupled with a Micro-Gas Turbine

Design and Off-Design Analysis of an ORC Coupled with a Micro-Gas Turbine 4 th International Seminar on ORGANIC RANKINE CYCLE POWER SYSTEMS September 13-15, 2017, Milano, Italy Design and Off-Design Analysis of an ORC Coupled with a Micro-Gas Turbine Authors: Alberto Benato

More information

Rankine cycle. Contents. Description

Rankine cycle. Contents. Description 페이지 1 / 6 Rankine cycle From Wikipedia, the free encyclopedia The Rankine cycle is a cycle that converts heat into work. The heat is supplied externally to a closed loop, which usually uses water. This

More information

+ economic + + flexible + + innovative + BENSON Boiler

+ economic + + flexible + + innovative + BENSON Boiler + economic + + flexible + + innovative + BENSON Boiler Research & Development at the BENSON Test Rig by Siemens AG Power Generation (PG) designs and constructs fossil fired power plants manufactures steam

More information

International Journal of Multiphase Flow

International Journal of Multiphase Flow International Journal of Multiphase Flow 37 (211) 769 776 Contents lists available at ScienceDirect International Journal of Multiphase Flow journal homepage: www.elsevier.com/locate/ijmulflow Comparison

More information

DESIGN AND RATING OF AN EVAPORATOR FOR WASTE HEAT RECOVERY ORGANIC RANKINE CYCLE USING SES36

DESIGN AND RATING OF AN EVAPORATOR FOR WASTE HEAT RECOVERY ORGANIC RANKINE CYCLE USING SES36 Paper ID: 192, Page 1 DESIGN AND RATING OF AN EVAPORATOR FOR WASTE HEAT RECOVERY ORGANIC RANKINE CYCLE USING SES36 Alihan Kaya 1 *, Marija Lazova 1 and Michel De Paepe 1 1 Ghent University, Department

More information

Combined Heat and Power

Combined Heat and Power Lecture 12 Combined Heat and Power Combustion Turbines and Co-generation Combustion Turbines and Combined Heat and Power (CHP) Systems See B. K. Hodge, Chapter 5 and Chapter 11. ISBN: 978-0-470-14250-9

More information

Analysis of Ejector Cooling Flow. Butovskyi Iegor, Kogut Volodimyr, Khmelniuk Mykhailo. Odessa National Academy of Food Technologies, Odessa, Ukraine

Analysis of Ejector Cooling Flow. Butovskyi Iegor, Kogut Volodimyr, Khmelniuk Mykhailo. Odessa National Academy of Food Technologies, Odessa, Ukraine Chinese Business Review, Apr. 2017, Vol. 16, No. 4, 203-209 doi: 10.17265/1537-1506/2017.04.004 D DAVID PUBLISHING Analysis of Ejector Cooling Flow Butovskyi Iegor, Kogut Volodimyr, Khmelniuk Mykhailo

More information

CHAPTER 1 BASIC CONCEPTS

CHAPTER 1 BASIC CONCEPTS GTU Paper Analysis CHAPTER 1 BASIC CONCEPTS Sr. No. Questions Jan 15 Jun 15 Dec 15 May 16 Jan 17 Jun 17 Nov 17 May 18 Differentiate between the followings; 1) Intensive properties and extensive properties,

More information

Design and modeling of a hybrid reversible solid oxide fuel cell organic Rankine cycle

Design and modeling of a hybrid reversible solid oxide fuel cell organic Rankine cycle Design and modeling of a hybrid reversible solid oxide fuel cell organic Rankine cycle Summary What Is FBK and ARES Energy research in ARES Overview of the analysis The Experience On Hydrogen Storage:

More information

IJENS-RPG [IJENS Researchers Promotion Group] ID: IJENS-1263-Attalla. Curriculum Vitae. Assistant Prof. Dr. Eng. Mohamed Attalla

IJENS-RPG [IJENS Researchers Promotion Group] ID: IJENS-1263-Attalla. Curriculum Vitae. Assistant Prof. Dr. Eng. Mohamed Attalla Curriculum Vitae Assistant Prof. Dr. Eng. Mohamed Attalla Faculty of Engineering - Mechanical Power and Energy Dept. South valley University E-mail : moha_attalla@yahoo.com El-Slame Street Qena Egypt Telephone:

More information

Breakdown dynamics of a horizontal evaporating liquid layer when heated locally

Breakdown dynamics of a horizontal evaporating liquid layer when heated locally Breakdown dynamics of a horizontal evaporating liquid layer when heated locally Serafim Spesivtsev 1,2,* 1 Kutateladze Institute of Thermophysics SB RAS, 630090, Novosibirsk, Russia 2 Novosibirsk State

More information

- 2 - SME Q1. (a) Briefly explain how the following methods used in a gas-turbine power plant increase the thermal efficiency:

- 2 - SME Q1. (a) Briefly explain how the following methods used in a gas-turbine power plant increase the thermal efficiency: - 2 - Q1. (a) Briefly explain how the following methods used in a gas-turbine power plant increase the thermal efficiency: i) regenerator ii) intercooling between compressors (6 marks) (b) Air enters a

More information

Performance Evaluation of Solar Assisted Heat Pump Water Heating System

Performance Evaluation of Solar Assisted Heat Pump Water Heating System IOSR Journal of Engineering (IOSRJEN) e-issn: 50-301, p-issn: 78-8719 Vol. 3, Issue 4 (April. 013), V PP 1-17 Performance Evaluation of Solar Assisted Heat Pump Water Heating System Kokila. R.N 1, Rajakumar.S

More information

Waste Heat Recovery Research at the Idaho National Laboratory

Waste Heat Recovery Research at the Idaho National Laboratory Waste Heat Recovery Research at the Idaho National Laboratory www.inl.gov Donna Post Guillen, PhD, PE Technology Forum: Low Temperature Waste Energy Recovery in Chemical Plants and Refineries, Houston,

More information

The impact of the condensation process on the degree of cleaning of flue gases from acidic compounds

The impact of the condensation process on the degree of cleaning of flue gases from acidic compounds The impact of the condensation process on the degree of cleaning of flue gases from acidic compounds Piotr Szulc 1,*, Tomasz Tietze 1, and Daniel Smykowski 1 1 Wroclaw University of Science and Technology,

More information

Comparison of ORC and Kalina cycles for waste heat recovery in the steel industry

Comparison of ORC and Kalina cycles for waste heat recovery in the steel industry Open Access Journal journal homepage:papers.itc.pw.edu.pl Comparison of ORC and Kalina cycles for waste heat recovery in the steel industry Jarosław Milewski a,, Janusz Krasucki b a Warsaw University of

More information

Honeywell Refrigerants Improving the Uptake of Heat Recovery Technologies 1

Honeywell Refrigerants Improving the Uptake of Heat Recovery Technologies 1 Honeywell Refrigerants Improving the Uptake of Heat Recovery Technologies 1 I. INTRODUCTION When developing a business strategy, it may seem odd to take into account the geologic time scale. However, in

More information

Contents. Tribute to a great thermodynamicist Professor Lucien Borel

Contents. Tribute to a great thermodynamicist Professor Lucien Borel Contents Preface Tribute to a great thermodynamicist Professor Lucien Borel v vii CHAPTER 1 Generalities and fundamental laws 1 l.a Cooling of a copper piece 1 l.b Shock of a container against a wall 3

More information

Steam generation unit in a simple version of biomass based small cogeneration unit

Steam generation unit in a simple version of biomass based small cogeneration unit MATEC Web of Conferences 18, 01010 (2014) DOI: 10.1051/ matecconf/ 20141801010 C Owned by the authors, published by EDP Sciences, 2014 Steam generation unit in a simple version of biomass based small cogeneration

More information

Permanent City Research Online URL:

Permanent City Research Online URL: Read, M. G., Smith, I. K. & Stosic, N. (2015). Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders. Paper presented at the 3rd International Seminar on ORC

More information

Waste Heat to Power (WHP) Technologies. Eric Maxeiner, PhD. May 24, 2017

Waste Heat to Power (WHP) Technologies. Eric Maxeiner, PhD. May 24, 2017 Waste Heat to Power (WHP) Technologies Eric Maxeiner, PhD. May 24, 2017 Presentation Outline of WHP WHP Market : Thermoelectric Steam Organic Rankine Cycle (ORC) sco 2 power cycle Overview of WHP: Definitions

More information

Investigating Two Configurations of a Heat Exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System

Investigating Two Configurations of a Heat Exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System Journal of Energy and Power Engineering 7 (2013) 66-73 D DAVID PUBLISHING Investigating Two Configurations of a Heat Exchanger in an Indirect Heating Integrated Collector Storage Solar Water Heating System

More information

R13. II B. Tech I Semester Regular/Supplementary Examinations, Oct/Nov THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max.

R13. II B. Tech I Semester Regular/Supplementary Examinations, Oct/Nov THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max. SET - 1 1. a) Discuss about PMM I and PMM II b) Explain about Quasi static process. c) Show that the COP of a heat pump is greater than the COP of a refrigerator by unity. d) What is steam quality? What

More information

Appendix B. Glossary of Steam Turbine Terms

Appendix B. Glossary of Steam Turbine Terms Operator s Guide to General Purpose Steam Turbines: An Overview of Operating Principles, Construction, Best Practices, and Troubleshooting. Robert X. Perez and David W. Lawhon. 2016 Scrivener Publishing

More information

A NOVEL APPLICATION OF A SCREW ROTOR ENGINE AS AN EXPANSION DEVICE IN AN ORGANIC RANKINE CYCLE

A NOVEL APPLICATION OF A SCREW ROTOR ENGINE AS AN EXPANSION DEVICE IN AN ORGANIC RANKINE CYCLE A NOVEL APPLICATION OF A SCREW ROTOR ENGINE AS AN EXPANSION DEVICE IN AN ORGANIC RANKINE CYCLE Slawomir Smolen ) Albrecht Eicke 1 INTRODUCTION From the perspective of the growing scarcity of primary energy

More information

CFD ANALYSIS OF MINI CHANNEL HEAT EXCHANGER USING WATER AS A WORKING FLUID

CFD ANALYSIS OF MINI CHANNEL HEAT EXCHANGER USING WATER AS A WORKING FLUID CFD ANALYSIS OF MINI CHANNEL HEAT EXCHANGER USING WATER AS A WORKING FLUID Bhavesh K. Patel 1, Ravi S. Engineer 2, Mehulkumar H. Tandel 3 1 Assistant Professor, Mechanical Engineering, Government Engineering

More information

1/58 Components of solar systems

1/58 Components of solar systems 1/58 Components of solar systems storage heat exchangers safety and protection devices air vents, check valve control & measurement Thermosiphon circulation system 2/58 circulation induced by buoyancy

More information

Two-Phase Distribution of R-134a in a Header of a Parallel Flow Heat Exchanger

Two-Phase Distribution of R-134a in a Header of a Parallel Flow Heat Exchanger Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering Two-Phase Distribution of Ra in a Header of a Parallel Flow Heat Exchanger Naehyun

More information

Experimental study and numerical simulation of flow pattern and heat transfer during steam drying wood

Experimental study and numerical simulation of flow pattern and heat transfer during steam drying wood Experimental study and numerical simulation of flow pattern and heat transfer during steam drying wood Abstract J. Barański 1, M. A. Wierzbowski 2, J. A. Stasiek 3 The high cost of fossil fuel and soaring

More information

Dr. J. Wolters. FZJ-ZAT-379 January Forschungszentrum Jülich GmbH, FZJ

Dr. J. Wolters. FZJ-ZAT-379 January Forschungszentrum Jülich GmbH, FZJ Forschungszentrum Jülich GmbH, FZJ ZAT-Report FZJ-ZAT-379 January 2003 Benchmark Activity on Natural Convection Heat Transfer Enhancement in Mercury with Gas Injection authors Dr. J. Wolters abstract A

More information

Cooling Characteristics and Heat Transfer Coefficients. during Fog Cooling of Hot Steel Plates*

Cooling Characteristics and Heat Transfer Coefficients. during Fog Cooling of Hot Steel Plates* UDC 621.771.23.016.2:536.24:621.771.23.063 Cooling Characteristics and Heat Transfer Coefficients during Fog Cooling of Hot Steel Plates* By Masashi MITSUTSUKA** and Keiji FUKUDA** Synopsis Air-atomized

More information

CFD analysis of high speed Francis hydraulic turbines

CFD analysis of high speed Francis hydraulic turbines TRANSACTIONS OF THE INSTITUTE OF FLUID-FLOW MACHINERY No. 131, 2016, 111 120 Maciej Kaniecki a, Zbigniew Krzemianowski b CFD analysis of high speed Francis hydraulic turbines a Research and Development

More information

Lecture (6) on. Schematic of a Thermal Power Plant. By Dr. Emad M. Saad. Mechanical Engineering Dept. Faculty of Engineering.

Lecture (6) on. Schematic of a Thermal Power Plant. By Dr. Emad M. Saad. Mechanical Engineering Dept. Faculty of Engineering. 1 2 Lecture (6) on Schematic of a Thermal Power Plant By Dr. Emad M. Saad Mechanical Engineering Dept. Faculty of Engineering Fayoum University Faculty of Engineering Mechanical Engineering Dept. 2015-2016

More information