Ongoing R&D projects in COST member countries Finland
|
|
|
- Esther Caldwell
- 6 years ago
- Views:
Transcription
1 Ongoing R&D projects in COST member countries Finland
2 Finland Participating Group 1, VTT Technical Research Centre of Finland Hannu Viitanen, Elina Sohlberg, Kirsi Immonen, Participating Group 2, Metla Finnish Forest Research Institute Pekka Saranpää, Erkki Verkasalo, Martti Venäläinen Participating Group 3, TUT, Tampere University of Technology TUT, Building Physics Juha Vinha, Anssi Laukarinen Participating Group 4, UEF, University of Eastern Finland, Dep of Environmental Sciences, Indoor Environment and Occupational Health, Pertti Pasanen, Department of applied physics, Biomater unit, Reijo Lappalainen Participating Group 5, Aalto University, Wood Science & Technology Mark Hughes, Lauri Rautkaari Participating group 6, Finnish Association of Construction Product Industries RTT, Wood Construction, Tomi Toratti
3 Finland, VTT Several research projects for industry for study the resistance of new solutions Optimisation of durability against mould and decay, and service life of wood Durability of bio polymers Microbial biodiversity in buildings and impacts on perceived IAQ Analyses of mould and decay damages in buildings Efficacy against mould and decay Causes for biodeterioration Durability of coated plywood (Plybiotest) CEN TC 38 WG 28 and Perform wood Durability of Thermowood Modelling of mould and decay resistance Material capability and enhancement Water permeability and performance above ground Mould modell Tekes project VTT projects on modelling Optikesto Tekes project Enersis Tekes project Several research projects for industry for new solutions Building physics calculation and modelling Fire resistance, performance against fire WoodWisdom projects Several research projects for industry for new solutions
4 Finland, VTT Several research projects for industry for new solutions Properties and resistance of new bio-based products, modification of polymers Encapsulation of biocides New solutions against mould and decay Performance of coated plywood, Plybiotest 2 project CEN TC 38 WG 28 and Perform wood Durability of Thermowood DURA TB - Durable Timber Bridges, WoodWisdom net work RH (%) C 5 C 10 C 20 C Time (weeks) Modelling service life of building components Performance above ground and field analyses Functionality and performance WoodExter (WoodWisdom), climate exposure VTT projects on service life Optimisation of durability and service life Research projects for new solutions 100 years service life of wood material (dry) Eco and energy efficiency of built environment Building physics calculation and modelling Renovation of energy efficiency of buildings Enersis Thermal comfort of users Heat and moisture perfomance of a wooden exterior wall
5 Finland, VTT New biopolymers from biomass Modification and functionalisation technologies for tayloring biopolymers Light weight from bio-based foams Improved fibre-biopolymer biocomposites by chemo-enzymatic modification Novel volume products from nanocellulose New products and solutions Construction products from forest biomass Adaptation and application September 2013 Bio-based solutions for net-zero energy bionic buildings Wood-based low-energy / passive family house concept Eco efficient buildings and infrastructures Eco efficiency and sustainability indicators Environmental product declaration Life cycle assessment method development critical reviews Carbon and water footprint analyses Sustainability assessment for new products and technologies LCA software, Material flow and energy flow analysis
6 Finland, Metla September 2013 Wood durability testing in soil contact Genetics and wood durability Efficacy against decay Future raw basis and cultivation forestry Product properties and their improvements Building with wood Wood based raw Material capability and enhancement Added value of forest products UOulu Bioactive compounds of bark Weather resistance Biomass: Residue: bark, stumps, roots, knots Lignans from knotwood (Metla, Åbo Academi) Bioactive compounds of bark (Uni Helsinki, Florence) UV protection, mould protection, termite protection
7 New forest and forest biomass based products and services Biomass Residue: bark, stumps, roots, knots Collaboration with ÅA university Phloem chemistry, Lignans from knotwood Collaboration with FRI, Japan Bioactive compounds UOulu of bark Collaboration with, University of Helsinki University of Florence Added value of forest products UV protection, mould protection, termite protection Pekka Saranpää
8 Finland, Technical University of Tampere, TUT Analysing moisture performance of envelope assemblies Development of analysing principles Determination of building physical test years in Finnish climate TUT and FMI Development of calculational mould growth model VTT TUT and VTT Outdoor air conditions Performance criterion TUT Effects of Climate Change and Increasing of Thermal Insulation on Moisture Performance of Envelope Assemblies and Energy Consumption of Buildings Indoor air conditions Functionality and performance Calculation softwares Determination of indoor air design conditions TUT and HUT Material properties Determination of Finnish building material properties TUT Future Envelope Assemblies and HVACsolutions FRAME Benchmarking of building physical HAM software TUT
9 Finland, Technical University of Tampere, TUT BUILDING PHYSICS, Calculation software Analyses of hygrothermal performance of envelope assemblies DofTherm1D HEAT 2D and 3D WUFI 1D and 2D Delphin 2D Calculations of buildings energy consumption (The Finnish Building Code for energy requirements) IDA ICE 3D Heat transfer and air flow investigations (now with moisture) Comsol Multiphysics 3D
10 Finland, University of Eastern Finland, UEF Indoor Environment Science based solution for indoor life quality Risk assessment of IAQ in buildings with deteriorated building Microdiverbuilt project Outdoor air conditions Performance criterion Indoor air conditions Functionality and performance Material properties Development of bioaerosol testing facility application for modelling and controllingindoor air quality (BITEFA) Microbial characterization of green and non green building (fungal and bacterial growth on the Modeling the impact of microbial growth in the building on indoor air quality Bioaerosol release from the contaminated
11 Finland, Aalto University Application of wood in buildings and interiors Surfaces and interfaces in wood-based Indoor air conditions Material properties Functionality and performance Wood Programme for architetcs Utilising the moisture & thermal buffering ability of wood and latent heat exchange Teaching in wood technology Wood & bio-based modification Bio fibre reinforced composites Wood and non wood fibre, regenerated cellulose Fibre mechanics, processing & modification Fibre matrix interactions
12 Specialist equipment VTT: Production of bio based products, test methods for durability of products, tools for service life and LCA analytics, epifluorescence microscopy, confocal laser scanning microcopy (CLSM), scanning electron microscopy (SEM), fluorescent in situ hybridization (FISH) tools, Combination techniques: physical, chemical and biological tools, molecular methods, pyrosequencing data analysis. TUT: Faculty of Built Environment were concidered excellent (international Research Assessment Exercise 2011): material testing, laboratory test facilities for envelope assemblies and field tests. Also numerical heat and moisture simulation tools, e.g. Comsol Multiphysics, Delphin 5, IDA ICE and Wufi 1D and 2D. METLA: Analytics of wood components and extractives, wood quality analytics UEF: Indoor air quality (IAQ): VOC with TCD GC MS, SVOC with GC MSD, HPLC, CO, CO 2, Microbial contaminants in the air, Particle concentrations: OPS, Dust Trak, P trak, filter sampling.
13 January 2013 Specialist equipment Properties Environmental Environmental Product Declaration (EPD) Emission testing Product accreditation Whole Life evaluations Life Cycle Assessments Dimensional stability Insect /termites / pests Fire resistance / reaction to fire Resistance to mould Moisture / sorption studies Natural Durability INSTITUTE
14 January 2013 Specialist equipment Laboratory tests Field tests Moisture data logging Surface performance / coatings Natural weathering Out of ground contact tests In ground contact tests Dimensional stability Sorption studies Leaching / weathering Insect /termite testing Mould resistance Natural Durability INSTITUTE
building renovation projects
Methodology to integrate energy efficiency, safe moisture performance and indoor environment quality in building renovation projects 2nd Central European Symposium on Building Physics Tuomo Ojanen, Riikka
A MATHEMATICAL MODELING OF MOISTURE BEHAVIOUR AND MOULD GROWTH IN BUILDING ENVELOPES
A MATHEMATICAL MODELING OF MOISTURE BEHAVIOUR AND MOULD GROWTH IN BUILDING ENVELOPES Kati Salminen, M. Sc. Student 1) Juha Vinha, Lic.Tech. 1) Hannu Viitanen, Ph.D. 2) 1) Laboratory of Structural Engineering,
Development of an improved model for mould growth: Modelling
Development of an improved model for mould growth: Modelling Hannu Viitanen, Ph.D., ) hannu.viitanen@vtt.fi Juha Vinha, Dr. Tech.,) juha.vinha@tut.fi Ruut Peuhkuri, Ph.D.,) ruut.peuhkuri@vtt.fi Tuomo Ojanen,
Seasonal mould growth probability in building envelope insulation
Seasonal mould growth probability in building envelope insulation Antti Haapala Assistant Professor University of Eastern Finland Filip Fedorik Post-doc researcher University of Oulu, Finland Outline House
Modelling of service life and durability of wooden structures
NSB 2011, 9th Nordic Symbosium on Building Physics, 29 May 2 June 2011 Tampere, Finland Modelling of service life and durability of wooden structures Hannu Viitanen 1, Tomi Toratti 1, Lasse Makkonen 1,
IEA Annex 41 MOIST-ENG Whole Building Heat, Air and Moisture Response Comparison of measured and simulated moisture buffering results
IEA Annex 41 MOIST-ENG Whole Building Heat, Air and Moisture Response Comparison of measured and simulated moisture buffering results VTT Building and Transport Tuomo Ojanen & Mikael Salonvaara VTT EXPERTISE
Ongoing R&D projects in COST member countries. COST FP1303: Performance of bio based building materials
Ongoing R&D projects in COST member countries UGent Woodlab www.woodlab.be CTIB TCHN, Brussels www.ctib tchn.be CRNFB DTB, Gembloux environnement.wallonie.be/crnfb/site/dtb/dtb01.cfm UGent Woodlab Ghent
Mould growth in building materials Experiments & Modelling
TTY Laboratory of Structural Engineering, Tampere University of Technology, Finland VTT Indoor Environment and Building Services, Technical Research Centre of Finland Mould growth in building materials
Breathability of building elements
Breathability of building elements prerequisite for healthy and comfortable indoor air climate? content Executive summary Introduction Indoor air comfort and humidity conditions Condensation on building
Moisture risks of passive retrofitting one town house for the adjacent conventional neighboring structures
Moisture risks of passive retrofitting one town house for the adjacent conventional neighboring structures 9 th Passive house conference, September 10-14, 2014, San Francisco Matthias Pazold Auf Wissen
Mould growth in building materials in laboratory and field experiments
Mould growth in building materials in laboratory and field experiments Kati Salminen, Ruut Peuhkuri, Kimmo Lähdesmäki, Hannu Viitanen, Juha Vinha, Leena Paajanen, Hanna Iitti, Tuomo Ojanen, Tomi Strander
European Conference on Wood Modification
New generation ThermoWood - How to take ThermoWood to the next level Jukka Ala-Viikari 1 and Duncan Mayes 2 1 International ThermoWood Association, P.O. Box 284, FIN-00171 Helsinki, Finland [email:jukka.ala-viikari@thermowood.fi]
Wood in carbon efficient construction
Wood in carbon efficient construction Environmental Committee of the 26 March 2014 Matti Kuittinen Architect, researcher Aalto University Why carbon efficiency? Normative development Carbon efficient buildings
Comparative evaluation of the predictions of two established mould growth models
2010 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae.org). Published in ASHRAE Transactions (2010, vol 116,part 2). For personal use only. Additional reproduction,
PERFORMANCE OF BIO-BASED BUILDING MATERIALS VIEWPOINTS FROM THE FIRST YEAR OF COST ACTION FP1303
PERFORMANCE OF BIO-BASED BUILDING MATERIALS VIEWPOINTS FROM THE FIRST YEAR OF COST ACTION FP1303 Dennis Jones SP Sustainable Built Environment/EcoBuild, Sweden What is COST? What is the mission of COST?
Thermablok Aerogel Isolation Strips
Uniclass 68152 Ultra Thin Internal Solid Wall, Ceiling & Floor Insulation Systems for New Build & Refurbishment Unique insulation with the lowest Thermal Conductivity of any insulation product 0.015W/m²K
Thermablok Aerogel Insulation Blanket Thermablok Aerogel Blanket
Uniclass 68152 Thermablok Aerogel Insulation Blanket Thermablok Aerogel Blanket Ultra Thin Internal Solid Wall, Ceiling & Floor Insulation Systems for New Build & Refurbishment Unique insulation with the
Thermablok Aerogel Isolation Strips Thermablok Aerogel Isolation Strips
Uniclass 68152 Ultra Thin Internal Solid Wall, Ceiling & Floor Insulation Systems for New Build & Refurbishment Unique insulation with the lowest Thermal Conductivity of any insulation product 0.014W/m²K.
Controlling the indoor environment using wood
Controlling the indoor environment using wood Mark Hughes Aalto University, Finland Wood and Health Seminar, 28 th November 2018, Oslo 1. The material and the indoor environment 2. The material and people
New biomass based businesses
New biomass based businesses Christine Hagström-Näsi Smart Forestry Matchmaking Event, Helsinki 25.5.2018 CLIC Innovation Ltd CLIC Innovation is: An Open Innovation platform (or a Cluster Management organization)
Global overview of bio-nano composite technology
Global overview of bio-nano composite technology Mohini Sain Director of Centre for Biocomposites and Biomaterials Processing University of Toronto OECD Nanocellulose Workshop, July 16th, 2009 Outlines
Can wood improve the indoor environment and energy-efficiency of buildings?
Can wood improve the indoor environment and energy-efficiency of buildings? Mark Hughes Aalto University, Finland Vain hyviä syitä 2 Hirsirakentamisen seminaari, Pudasjärvi 28.-29.8.2018 28 th August 2018
WUFI: Moisture Engineering in the 21 st Century (and Beyond)
WUFI: Moisture Engineering in the 21 st Century (and Beyond) Andre Desjarlais Oak Ridge National Laboratory 15 September 2011 What is WUFI? 2 Managed by UT-Battelle Presentation Summary Are we concerned
Renewing Wood Product Value Chains and Timber Procurement Solutions, PUU
Renewing Wood Product Value Chains and Timber Procurement Solutions, PUU Research and Development Programme 2009 2013 Finnish Forest Research Institute PUU programme increases knowledge on procurement,
Infiltration simulation in a detached house empirical model validation
Infiltration simulation in a detached house empirical model validation Juha Jokisalo¹, Targo Kalamees¹, Jarek Kurnitski¹, Lari Eskola¹, Kai Jokiranta¹ and Juha Vinha² ¹Helsinki University of Technology,
Improving the hygrothermal properties of clay plasters
Improving the hygrothermal properties of clay plasters A. Thomson 1,a, D. Maskell 1,b, P. Walker 1,c, M. Lemke 2,d, A. Shea 1, e, M. Lawrence 1, f 1 BRE Centre for Innovative Construction Materials, University
Wood is more than meets the eye!
Wood is more than meets the eye! Mark Hughes Aalto University Puupäivä 30 th November 2017 Globally, more than 30% of materials are used in building construction Over 1/3 of primary energy used in buildings
BioNets Programme Results March Project examples
BioNets Programme Results March 2018 Project examples Precision Forestry Silvere Challenge: Current methods for forest inventory, the foundation for forest management planning, are outdated and unreliable
Improving Energy Efficiency in Buildings (IEEB) Energy Quarter, Ritaharju Monitoring
Improving Energy Efficiency in Buildings (IEEB) Energy Quarter, Ritaharju Monitoring Kimmo Illikainen Oulu University of Applied Sciences Nordic Symposium on Energy Efficiency in Buildings Oulu, Finland,
ThermoWood by Stora Enso The environmentally friendly choice
ThermoWood by Stora Enso The environmentally friendly choice Stora Enso Do good for the people and the planet Stora Enso is a leading provider of renewable solutions in packaging, biomaterials, wooden
WHAT PLACE FOR ECO-MATERIALS AND BIO-BASED SOLUTIONS IN EU RESEARCH POLICIES?
WHAT PLACE FOR ECO-MATERIALS AND BIO-BASED SOLUTIONS IN EU RESEARCH POLICIES? Anne-Claire Streck Policy & Project Officer Overview of the presentation 1) Eco-efficient construction & building materials
FAST DRYING CONCRETE
FAST DRYING CONCRETE PENTTI LUMME Abstract Several research projects have been carried out in Finland to investigate the moisture control process at the jobsite and the effect of moisture on concrete construction.
Pajun uudet käyttömahdollisuudet VTT Aalto -yhteistyöprojekti
Pajun uudet käyttömahdollisuudet VTT Aalto -yhteistyöprojekti Pajun kestävä tuotanto ja käyttö -seminaari, Jyväskylä 28.1.2015 Ulla Holopainen-Mantila Teknologian tutkimuskeskus VTT Oy Background Global
Innovation Ecosystems in a Sustainable Bioeconomy. A Finnish case study for OECD
Innovation Ecosystems in a Sustainable Bioeconomy A Finnish case study for OECD Dr. Solveig Roschier, Maija Aho, Santeri Palomäki, Laura Descombes Gaia Consulting 30.5.2018 Agenda 1) Introduction 2) Country
Functional wood: wood in carbon, energy and resource efficient construction
ARK-E4000: Wood in Architecture and Construction Functional wood: wood in carbon, energy and resource efficient construction Mark Hughes 3 rd November 2017 The VERY basics! Wood grows on trees! Trees are
Hygroscopic Materials versus Mechanical Ventilation
Hygroscopic Materials versus Mechanical Ventilation 4.1 Ma'er and Material Science Andrea Klinge, Eike Roswag-Klinge Roswag Architekten Patrick Fontana, Matthias Richter, Johannes Hoppe Bundesanstalt für
INDOOR AIR QUALITY AND MATERIAL EMISSIONS IN NEW BUILDINGS
INDOOR AIR QUALITY AND MATERIAL EMISSIONS IN NEW BUILDINGS H Järnström * and K Saarela VTT Building and Transport, Service Centre, P.O. Box. 141, FIN-244 VTT, Finland ABSTRACT A research project was established
SUMMARY OF HOUT BAY HOUSE RESEARCH PROJECT
SUMMARY OF HOUT BAY HOUSE RESEARCH PROJECT Progress in Hout Bay House research project: Thermal properties and wood degradation Ing. Eliska Oberhofnerova Department of Wood Products and Wood Constructions
Hygrothermal modelling of a sustainable retrofit taking into account the urban microclimate. Case study of the medieval city center of Cahors (France)
Hygrothermal modelling of a sustainable retrofit taking into account the urban microclimate. Case study of the medieval city center of Cahors (France) Sophie Claude 1, Stéphane Ginestet 1, Marion Bonhomme
RESULTS OF LONG-TERM ENERGY EFFICIENCY MONITORING OF TEST BUILDINGS UNDER REAL CLIMATIC CONDITIONS
Section Green Buildings Technologies and Materials RESULTS OF LONG-TERM ENERGY EFFICIENCY MONITORING OF TEST BUILDINGS UNDER REAL CLIMATIC CONDITIONS Dr. Staņislavs Gendelis Assoc. Prof. Dr. Andris Jakovičs
On the hygrothermal performance of straw bale wall elements in Belgium
Sustainability in Energy and Buildings: Research Advances: Vol 3: Sustainability in Energy and Buildings (SEB-14) Short Papers pp.37-42 : seb14s-007 On the hygrothermal performance of straw bale wall elements
Wood Composites. Martin P. Ansell. Composites Science and Engineering: Woodhead Publishing Series in. Number 54. Edited by ELSEVIER P**^ ^
Woodhead Publishing Series in Composites Science and Engineering: Number 54 Wood Composites Edited by Martin P. Ansell ELSEVIER AMSTERDAM BOSTON CAMBRIDGE HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO
Eco-efficient packaging:
; Eco-efficient packaging: Material use reduction through high performance composites and barriers PulPaper 2010 Messukeskus 2.6.2010 @ 12.20-12:40 Ali Harlin, VTT 31.5.2010 2 New & Innovative Main themes:
Finnforest. ThermoWood Durable and environmentally sound solution
Finnforest ThermoWood Durable and environmentally sound solution 2 A durable and beautiful choice for various applications Finnforest ThermoWood is thermal modified wood. This process has a permanent effect
Optimisation of tannin extraction from spruce and pine bark
Optimisation of tannin extraction from spruce and pine bark Petri Kilpeläinen, Hannu Ilvesniemi, Pekka Saranpää and Martti Venäläinen Kokkola materials week 31.10.18 Introduction Wood bark Hot water extraction
MouldPulp Development of Durable, Fully Bio-Based Thermoplastic Composites from Bioplastics and Pulp Fibres for Injection Moulding Applications
MouldPulp Development of Durable, Fully Bio-Based Thermoplastic Composites from Bioplastics and Pulp Fibres for Injection Moulding Applications Thomas Wodke, Fraunhofer UMSICHT Project Objectives and Main
Honka Technology. HONKA TECHNOLOGY Healthy houses, innovated by nature.
HONKA TECHNOLOGY Healthy houses, innovated by nature. HONKA TECHNOLOGY HEALTHY HOUSES, INNOVATED BY NATURE Read more about the benefits and possibilities of modern log technology and how the industry pioneer
Energy Efficient Buildings in Germany An Introduction
Energy Efficient Buildings in Germany An Introduction Contents Introduction Statutory provisions and targets From research and demonstration projects to marketable buildings Designing of energy efficient
Table 2 Independent lab test results for Conventional 2x6 Wall U-factor 0F to 70F (28.7% framing)
Thermal and Mold Index Performance Comparison for BamCore LLC Assessed by: Prudence Ferreira, CPHC. Hygrothermal Specialist Report Date: October 21, 2018 San Francisco Toronto Fairbanks Charlottesville
LiLo: Development of advanced Lignincellulose-composites. impact properties for Logistic. Dr. Lars Ziegler, Tecnaro GmbH
LiLo: Development of advanced Lignincellulose-composites with high impact properties for Logistic Dr. Lars Ziegler, Tecnaro GmbH Project Objectives The aim of the LiLo project is to investigate and develop
SIP Homes: Built for a Lifetime of Comfort and Value
Innovative Steel Structures (949) 607-9729 leosmarthomes@gmail.com SIP Homes: Built for a Lifetime of Comfort and Value In also offer high-performance, sustainable homes made with Structural Insulated
Project RESPONSE on Improved Modelling of Electric Loads for Enabling Demand Response by Applying Physical and Data-Driven Models
Project RESPONSE on Improved Modelling of Electric Loads for Enabling Demand Response by Applying Physical and Data-Driven Models ETIP SNET Northern Region Workshop 7-8 December 2017 Riga. 1 The consortium
INTEGRATED HEAT, ELECTRICITY AND BIO-OIL PRODUCTION. IEA Biomass Task 34 Meeting in Chicago Jani Lehto, Metso Pekka Jokela, UPM
INTEGRATED HEAT, ELECTRICITY AND BIO-OIL PRODUCTION IEA Biomass Task 34 Meeting in Chicago 15-09-2009 Jani Lehto, Metso Pekka Jokela, UPM Contents Metso Metso and UPM Bio-oil Development Project Joint
DECKING CLADDING INTERIOR
MADE IN FINLAND DECKING CLADDING INTERIOR LUNAWOOD THERMOWOOD The thermal modification process of THERMOWOOD utilises only high temperatures (between 190 and 212C) and steam. Therefore the end-product
think eco WOOD BOARD Bahan Binaan KELASʻOʼ
think eco BOARD Bahan Binaan KELASʻOʼ Bahan Binaan KELASʻOʼ BS 476 : PART 6 : 1989 + A1 :2009 SustainableArchitecturalSolutions Green Sustainable Building Products or eco-friendly products refer to building
Hygrothermal behaviour of timber frame walls finished with a brick veneer cladding
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 132 (2017) 363 368 www.elsevier.com/locate/procedia 11th Nordic Symposium on Building Physics, NSB2017, 11-14 June 2017, Trondheim,
ASSA ABLOY Door Security Solutions Contribution Toward LEED v4 Certification
Door Security Solutions Contribution Toward LEED v4 Certification U.S. Green Building Council's Leadership in Energy and Environmental Design, or LEED, is used throughout the world to build healthy and
Inside [H]-house Living comfort in modern airtight buildings
![Inside [H]-house Living comfort in modern airtight buildings](/thumbs/86/93633972.jpg "Inside [H]-house Living comfort in modern airtight buildings")
Inside [H]-house Living comfort in modern airtight buildings Roswag Architekten 18.02.2016 Roswag Architekten Office Presentation Building with renewable resources in Germany & internationally Roswag Architekten
Passivhaus Building Solutions Using Innovative Irish Wood Panels. David Murray Innovation Manager Coillte Panel Products
Passivhaus Building Solutions Using Innovative Irish Wood Panels David Murray Innovation Manager Coillte Panel Products See the Light 2015 Every solution requires a problem! Shift to a Low Carbon and Sustainable
This document is downloaded from the Digital Open Access Repository of VTT. P.O. box 1000 FI VTT Finland VTT
This document is downloaded from the Digital Open Access Repository of VTT Title Author(s) Citation Rights Wood-based Thermal Insulation Materials - WOTIM Jetsu, Petri; Pöhler, Tiina 10th Biennial Johan
Air leakage and hygrothermal performance of an internally insulated log house
Air leakage and hygrothermal performance of an internally insulated log house Üllar Alev, M.Sc 1 Andres Uus, M.Sc 2,3 Marko Teder, M.Sc 2 Martti-Jaan Miljan, M.Sc 2 Targo Kalamees, Professor 1 1 Tallinn
This document is downloaded from the Digital Open Access Repository of VTT
This document is downloaded from the Digital Open Access Repository of VTT Title Foam forming - potential production technology for building materials Author(s) Jetsu, Petri; Pöhler, Tiina Citation 12th
Available online at ScienceDirect. Energy Procedia 96 (2016 )
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 96 (2016 ) 768 778 SBE16 Tallinn and Helsinki Conference; Build Green and Renovate Deep, 5-7 October 2016, Tallinn and Helsinki Energy
AMERICAN WOOD PROTECTION ASSOCIATION 2017 All Rights Reserved
AMERICAN WOOD PROTECTION ASSOCIATION All Rights Reserved Jurisdiction: Technical Committee P-9 Adopted on September 17, 2013 This Guidance Document is not an AWPA Standard. These are nonmandatory guidelines
LIGHTWEIGHT WOOD-BASED WALLS WITH VARIOUS THERMAL INSULATIONS: LONG-TIME MEASUREMENT AND SUBSEQUENT COMPARISON WITH HAM SIMULATION
LIGHTWEIGHT WOOD-BASED WALLS WITH VARIOUS THERMAL INSULATIONS: LONG-TIME MEASUREMENT AND SUBSEQUENT COMPARISON WITH HAM SIMULATION Pavol Durica 1, Peter Juras 2, Vladimir Gaspierik 1, Jan Rybarik 1, Daniela
PRODUCT CATALOGUE AND QUALITY SPECIFICATION SLP-THERMOWOOD
PRODUCT CATALOGUE AND QUALITY SPECIFICATION SLP-THERMOWOOD Helsinki We combine Finnish wood, natural appearance and ecological thinking. As a result we offer durable and valuable wood products. Suomen
Applied Computer Modeling for Building Engineering
Applied Computer Modeling for Building Engineering Dr John F. Straube Dupont Young Professor Dept of Civil Engineering & School of Architecture University of Waterloo Ontario, Canada jfstraube@uwaterloo.ca
Dick Sandberg 1 and Andreja Kutnar 2 ABSTRACT
Recent Development of Thermal Wood Treatments: Relationship between Modification Processing, Product Properties, and the Associated Environmental Impacts Dick Sandberg 1 and Andreja Kutnar 2 1 Luleå University
Hygrothermal behaviour of compact roofs under Belgian climate
Hygrothermal behaviour of compact roofs under Belgian climate Glenn De Meersman 1 Nathan Van Den Bossche 2 Arnold Janssens 3 Robbe Verelst 4 T 2 ABSTRACT Compact flat roofs are more and more constructed
Moisture convection performance on the joint of external wall and attic floor - laboratory tests and two-dimensional simulation model validation
Moisture convection performance on the joint of external wall and attic floor - laboratory tests and two-dimensional simulation model validation Targo Kalamees, Jarek Kurnitski HVAC-Laboratory, Helsinki
Measuring the Impact of Building Materials and the Opportunity for Wood- Based Construction. 12 October 2010 Dr Ed Suttie BRE Timber
Measuring the Impact of Building Materials and the Opportunity for Wood- Based Construction 12 October 2010 Dr Ed Suttie BRE Timber Introduction Construction industry drivers Key construction materials
ThermoWood. Main Properties. Updated / PVäät
ThermoWood Main Properties Updated 1.3.2011 / PVäät Thermowood main properties 2 Property Equilibrium moisture content (EMC) Description Due to changes in cellular structure, wood s ability to absorb water
SUSREF. Sustainable Refurbishment of Building Facades and External Walls 1 (57) Deliverable: D2.2
SUSREF Sustainable Refurbishment of Building Facades and External Walls 7th framework programme Theme Environment (including climate change) Small or medium scale research project Grant Agreement no. 226858
6 th Annual North American Passive House Conference. Evaluation of Potential for Moisture in High R- value Walls in Cold Climates
IMPROVING THE BUILT ENVIRONMENT g 6 th Annual North American Passive House Conference Evaluation of Potential for Moisture in High R- value Walls in Cold Climates October 2011 Lois B. Arena Steven Winter
Hygrothermal performance of sarking roof structure
Nirmal Magarati Magar Hygrothermal performance of sarking roof structure Metropolia University of Applied Sciences Bachelor of Civil Engineering Sustainable Building Engineering Bachelor s Thesis 5 April
Breaking the limits of bioplastics using degradable glass fiber as reinforcement Arctic Biomaterials Oy Tomi Kangas, Sales Director
Breaking the limits of bioplastics using degradable glass fiber as reinforcement 6.2.2019 Arctic Biomaterials Oy Tomi Kangas, Sales Director GENERAL COMPANY INFO Founded 2014 35 professional persons and
On design paradigm for durable, energy efficient buildings with excellent indoor environment
BEST 2; Portland, OR April 12, 2010 On design paradigm for durable, energy efficient buildings with excellent indoor environment Mark Bomberg, Donald Onysko and Joseph Lstiburek The sustainable value of
Wall Enclosure Monitoring and Performance Assessment for the Orchards at Orenco Passive House
Wall Enclosure Monitoring and Performance Assessment for the Orchards at Orenco Passive House PORTLAND BEC / WALSH CONSTRUCTION CO / ROXUL APRIL 3, 2017 JONATHAN SMEGAL, SENIOR PROJECT MANAGER, RDH BUILDING
Warm climate - Passivhaus system
Warm climate - Passivhaus system Contents ISOBIO system 3 ISOBIO standard panel 4 Panel assembly 5 Functions 7 Construction details 8 TB 01. Slab on grade - External wall 11 TB 02. Suspended floor over
Cool temperate climate - Passivhaus system
Cool temperate climate - Passivhaus system Contents ISOBIO system 3 ISOBIO standard panel 4 Panel assembly 5 Functions 7 Construction details 8 TB 01. Slab on grade - External wall 11 TB 02. Suspended
High Performance, Economical and Sustainable Biocomposite Building Materials (BioBuild) Anthony Stevenson NetComposites Ltd, UK
High Performance, Economical and Sustainable Biocomposite Building Materials (BioBuild) Anthony Stevenson NetComposites Ltd, UK 1 About NetComposites www.netcomposites.com A world-leading technology business
Fraunhofer CSE: Applied R&D to Drive Clean Energy Technology Commercialization & Economic Development June 2014
Fraunhofer CSE: Applied R&D to Drive Clean Energy Technology Commercialization & Economic Development June 2014 Fraunhofer is the largest organization for applied research in Europe More than 81 research
LEED Best Practices Save $$$
16 Savings result where LEED has been applied to improve IAQ! LEED Best Practices Save $$$ A growing body of green building case studies document the benefits of healthy IAQ in the workplace Learn More
1. Introduction. Carl-Magnus Capener, Ph.D. 1 Stephen Burke, Ph.D. 2 Simon Le Roux, Architect 3 Stephan Ott, Architect 4
Hygrothermal Performance of TES Energy Façade at two European residential building demonstrations Comparison between Field Measurements and Simulations Carl-Magnus Capener, Ph.D. 1 Stephen Burke, Ph.D.
Indoor Environmental Quality Policy
University of Florida Indoor Environmental Quality Policy For New Construction and Renovation Environmental Health and Safety Division June 2009 Introduction Effective management of the indoor environmental
SAS International GSAS / QSAS compliance
Environmental Commitment SAS International is committed to ensuring environmental best practice throughout the life of its products to ensuring minimum impact upon the global environment. As a business
Project acronym: VOC reduction of lignin containing materials Project no: EIB
Improvement of strength properties and reduction of emission of volatile organic compounds by enzymatic modification of lignin containing biopolymers and composites Project acronym: VOC reduction of lignin
The Global Market Leader In Thermowood
The Global Market Leader In Thermowood BRAND CORE Love for the Forest Experiencing nature in an urban context. For demanding building and design solutions Lunawood a Finnish success story Lunawood
Improving the Energy Performance of Mass Masonry Enclosures
Improving the Energy Performance of Mass Masonry Enclosures APT DC Symposium Energy Efficiency of Historic Sites Chrissie Parker, P.E. Simpson Gumpertz & Heger www.sgh.com Presentation Outline Background
Stakeholder viewpoints towards bio-energy certification in North and South Karelia, Finland
Stakeholder viewpoints towards bio-energy certification in North and South Karelia, Finland - results from a survey among non-industrial private forest owners Pradipta Halder University of Eastern Finland
Solid timber buildings enter the 21 st century aided by technology and environmental awareness.
Solid timber buildings enter the 21 st century aided by technology and environmental awareness. Jeff Parker Lockwood Group Ltd and Member of Solid Wood Building Initiative. Abstract. Buildings made from
Finnish National Forest Strategy 2025 and the Finnish Bioeconomy Strategy monitoring and evaluation the strategies goals
and the Finnish Bioeconomy Strategy 2014 - monitoring and evaluation the strategies goals Markus LIER Research Unit Economics and Society Research Group Forest Resources and Natural Resource Planning markus.lier@luke.fi
Nanotechnology and the Agenda 2020 Industry Technology Vision
Nanotechnology and the Agenda 2020 Industry Technology Vision Presentation to the 48 th Annual Convention of the Society of Wood Science and Technology Lori A. Perine Executive Director Agenda 2020 Technology
Fuel Cell R&D at VTT Technical Research Centre of Finland
Fuel Cell R&D at VTT Technical Research Centre of Finland VTT Fuel Cells Fuel cells can be applied anywhere where electricity is needed. Typical applications are replacement of batteries in the W-power
LEED Green Building Leadership. LEED Data. Green Building Leadership
LEED Green Building Leadership LEED Data Green Building Leadership 02 www.kingspanaccessfloors.co.uk LEED Green Building Leadership Leadership in Energy & Environmental Design (LEED) LEED helps demonstrate
Mapping the Innovation Potential in Kainuu Region
BRIDGES -PROJECT Mapping the Innovation Potential in Kainuu Region Burgos 3.-4. November 2016 Timo Karjalainen Kajaani University Consortium 1 Kainuu, Finland Size comparable to Belgium Population 75 300
WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS
WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS Design by ex nihilo APPLICATIONS Durable and profitable products and processes
Variables affecting indoor air quality in newly finished buildings- a multivariate evaluation
Variables affecting indoor air quality in newly finished buildings- a multivariate evaluation Helena Järnström 1,2, Kristina Saarela 1, Pentti Kalliokoski 2, Anna-Liisa Pasanen 3 1 VTT, P.O.Box 1000, FIN-02044
Performance of internal wall insulation systems - experimental test for the validation of a hygrothermal simulation tool
Performance of internal wall insulation systems - experimental test for the validation of a hygrothermal simulation tool Valentina Marincioni, M.Sc. 1 Hector Altamirano-Medina, Ph.D. 1 Ian Ridley, Ph.D.
Thermal Control in Buildings by John Straube (updated )
building science.com 2006 Building Science Press All rights of reproduction in any form reserved. Building Science Digest 011 Thermal Control in Buildings 2006-11-02 by John Straube (updated 2011-12-12)