New Measurement Engineering for the Domestic Installer and Heating Contractor

Transcription

1 testo New Measurement Engineering for the Domestic Installer and Heating Contractor Outstanding functionality and usability NEW! C hpa O 2 CO NO P CO 2 T

2 A new flue gas analyser offering outstanding functionality and usability The testo 330 series is a new generation of flue gas analysers that offers the domestic installer and heating contractor a complete instrument Intelligent technology The testo features instrument diagnosis which provides the user with information on the qualitative status of various functions and consumable parts such as gas cells. This information can be used to help plan and schedule any servicing required and therefore avoid unplanned and potentially costly instrument downtime. Easy to use The testo is designed to provide the user with hours of reliable use. The instrument uses a compact Lithium Ion rechargeable battery that delivers over six hours of pump use. The battery can be recharged whilst inside or outside the analyser, and both the battery and the instrument's cell can be changed quickly and easily by the user. User friendly features The instrument is designed to be simple and easy to use; the highly robust fast probe connection system for all probes eliminates any operator confusion, the menu-driven operational procedures helps to avoid errors and save time on-site. The instrument's large backlit display makes reading the instrument effortless in low light situations. hpa

3 4 5 6 NO O 2 C P CO Long life of parts The typical service life of the Testo cells is approximately three years. The Lithium Ion rechargeable batteries - free from the memory effect and total discharge - are currently unbeatable in terms of service life. Fast, efficient and accurate The testo is quick to calibrate and the capability to select the fuel at the same time means that the instrument can be ready to be used in just 30 seconds. When measuring differential pressure, differential temperature or gas flow rate, the analyser will recognise the probe when it is connected and automatically display the corresponding menu. Durable and robust The testo is ergonomically designed to fit comfortably in the hand, but more importantly the unique housing offers built in protection from impact and dirt. In addition, the large backlit display is slightly recessed in the housing for better protection.

4 The right accessories for every application. The probes The flue probes have been designed to offer unparalleled usability and durability. Users will find day to day use of the probes straightforward thanks to features such as the probe handle, which is ergonomically designed for easy handling and positioning, and a probe design that requires little or no maintenance and can be easily cleaned. To meet a range of applications a wide selection of probe lengths and diameters are available and when changing the probe the quick connection function ensures that all paths are connected correctly. The modular flue gas probes also feature a particle filter accommodated in the probe handle, which stops damaging particles from entering the gas pathways. The ambient CO and CO 2 probes are recognised automatically by the analyser which then selects the corresponding instrument menu. The analyser also allows the user to define an alarm limit which will sound an audible signal when the value is exceeded. And to make tasks simpler CO and CO 2 s can be carried out in conjunction with the flue gas. The gas leak detection probe also has a user-defined audible alarm and is automatically recognised by the instrument, which can display the s in a trend graph.

5 The new versatile infrared printer New upload and configuration software The new testo printer - cordless with infrared interface - saves data for printing. This saves time since the analyser transmits the data in two seconds and is ready for operation immediately after the data is transmitted. Our analyser software is developed to be easy to use. Data can be easily uploaded, filed and managed. When measuring online, it is also possible to control the analyser via the software.

6 Testo Professional Set for the Domestic Installer and Heating Contractor Testo Ltd has put together a special set designed for the domestic installer and heating contractor which contains the following items: testo flue gas analyser including O 2 and CO cells, rechargeable Lithium Ion battery and calibration protocol V mains unit for mains operation or battery recharging in analyser (Supplied as standard with a 230V AV 3 pin plug) Modular flue gas probe, 500 o C maximum temperature, immersion depth: 180 mm, diameter 6 mm Basic system case for instrument, probes and accessories Testo a complete solution for the heating contractor Picture is for illustrative purposes only. Please refer the the above list for the contents of the set. Instrument diagnosis Rechargeable battery status display Sensor status display Monitoring of condensate trap level with 'FULL' alarm Display of pump capacity (l/min.) Display of error status including description and diagnosis Display of last maintenance Display of instrument temperature Operating hour counter Additional tasks T, flow/return Ambient CO Ambient CO 2 Detection of gas leaks with gas leak detection probe P for gas pressure Gas/oil flow rate determination Automatic menu selection Recognition of connected probe Memory management 200 data records Several data records per location are possible Read in locations using barcode reader IRDA interface for data transfer to PDA/Notebook USB interface for data transfer to PC ZIV driver for all standard software Additional features Interface to Testo Software with analysis and graphics functions and online Flue gas dewpoint : Calculated parameter Graphics display Integrated impact protection with base magnets, recessed display Protection class: IP40 Rechargeable battery lifetime > 6 h with pump operating Battery rechargeable inside and outside of instrument Adjustable alarm thresholds for ambient CO/CO 2 Subject to change without notice

7 Technical data Temperature Draught Pressure O 2 CO (without H 2 compensation) Efficiency (ETA) Flue gas loss CO 2 Option: NO low Option: NO Ambient CO (with CO probe) Gas leak for combustible gases (with gas leak detection probe) -40 to C ±0,5 C (0.0 to C) ±0,5 % of mv (remaining range) 0.1 C (-40 to 999,9 C) 1 C (remaining range) to 40 hpa ±0.02 hpa or ±0.5 % of mv (-0.50 to hpa) ±0.03 hpa (+0.61 to hpa) ±1.5 % of mv (+3.01 to hpa) 0.01 hpa 0 to 200 hpa ±0.5 hpa (0.0 to 50.0 hpa) ±1 % of mv (50.1 to hpa) ±1.5 % of mv (remaining range) 0.1 hpa 0 to 21 Vol. % 0.1 Vol. % ±0.2 Vol. % < 20 s 0 to 120 % 0.1 % 0 to 99.9 % 0.1 % Display range Measurement 0 to 4000 ppm 1 ppm ±20 ppm (0 to 400 ppm) ±5% of mv (401 to 1000 ppm) ±10% of mv (1001 to 4000 ppm) < 60 s 0 to CO 2 max 0.1 Vol. % ±0.2 Vol. % Digital calculation from O 2 < 40 s 0 to 300 ppm 0.1 ppm ±2 ppm (0.0 to 40.0 ppm) ±5% of mv (remaining range) < 30 s 0 to 3000 ppm 1 ppm ±5 ppm (0 to 100 ppm) ±5% of mv (101 to 2000 ppm) ±10% of mv (2001 to 3000 ppm) < 30 s 0 to 500 ppm 1 ppm ±5 ppm (0 to 100 ppm) ±5% of mv (>100 ppm) Approx. 35 s Range of indication ,000 ppm CH 4 / C 3 H 8 Signal Optical display (LED) audible display via buzzer Adjustment time t90 < 2 s * Ambient CO 2 (with ambient CO 2 probe) General Technical Data Memory Weight Dimensions Storage temp. Oper. temp. Display Power supply Warranty 0 to 1 Vol. % 0 to ppm ±(50 ppm ±2 % of mv) (0 to 5000 ppm) Approx. 35 s 200 Sites 600 g (without rechargeable battery) 270 x 90 x 65 mm -20 to +50 C -5 to +45 C Graphics display: 160 x 240 pixel Rechargeable block: 3.7 V / 2.2 Ah Mains unit: 6 V / 1.2 A Analyser/cells/probe 2 years, rechargeable battery 1 year IRDA printer Subject to change without notice Printer type Infrared-controlled thermal printer, adjustable contrast, graphics can be printed Reception radius Max. 2 m Dimensions 186 x 91 x 61 mm Weight 430 g incl. batteries Oper. temp. 0 to +50 C Storage temp. -40 to +60 C Power supply 4 round cell batteries, 1.5 V or NC rechargeable batteries *the larger value applies

8 Fax Order Form Qty. testo Set: Professional Set Qty. Probes - testo flue gas analyser including O2 and CO cells, rechargeable Lithium Ion battery and calibration protocol V mains unit for mains operation or battery recharging in analyser (Supplied as standard with a 230V AV 3 pin plug) - Molar flue gas probe, 500oC maximum temperature, immersion depth: 180 mm, diameter 6 mm - Basic system case for instrument, probes and accessories Modular flue gas probes, available in 2 lengths, incl. positioning cone, NiCr-Ni thermocouple, 2.2 m hose and particle filter Flue gas probe 180 mm long, Ø 8 mm, Tmax 500 C Flue gas probe 300 mm long, Ø 8 mm, Tmax 500 C Flue gas probe 180 mm long, Ø 6 mm, Tmax 500 C Flue gas probe 300 mm long, Ø 6 mm, Tmax 500 C Qty. Instrument / Options / Upgrades testo flue gas analyser incl. rechargeable battery and calibration protocol Option: Fine draught, 0.1 Pa, range to 100 Pa (instead of the standard draught ) Option: NO meas. cell, meas. range 0 to 3000 ppm, 1 ppm resolution On request Upgrade: NO meas. cell, meas. range 0 to 3000 ppm, 1 ppm resolution On request Option: NOlow meas. cell, meas. range 0 to 300 ppm, 0.1 ppm resolution Upgrade: NOlow meas. cell, meas. range 0 to 300 ppm, 0.1 ppm resolution Qty. Accessories V mains unit for mains operation or batt recharging in analyser Spare rechargeable battery with recharging station IRDA printer Spare thermal paper for printer (6 rolls), permanent ink Barcode reader to read in customer number on site Barcode labels, self-adhesive (1200 off) Adhesive pockets (50 off) for printout, paper barcode labels Smoke tester with oil, soot sheet, for measuring soot in flue gas Hose connection set for separate gas pressure Differential temperature set consisting of 2 pipe clamp probes and adapter Spare particle filter (10 off) testo 330 software with analysis and graphics functions, online USB connection cable, instrument to PC ISO calibration certificate/flue gas Probe accessories Probe shaft 180 mm long, Ø 8 mm, Tmax 500 C Probe shaft 180 mm long, Ø 6 mm, Tmax 500 C Probe shaft 300 mm long, Ø 8 mm, Tmax 500 C Probe shaft 300 mm long, Ø 6 mm, Tmax 500 C Probe shaft 300 mm, Ø 8 mm, Tmax 1000 C Probe shaft 700 mm long, Ø 8 mm, Tmax 1000 C Flexible probe shaft 330 mm long, Ø 10 mm, Tmax 500 C Multi-hole probe shaft, 300 mm long, Ø 8 mm, for mean CO calculation Hose extension, 2.80 m, extension cable for probe and analyser Cone 8 mm, steel, with grip clamp and grip, Tmax 500 C Cone 6 mm, steel, with spring clamp and grip, Tmax 500 C Additional probes Dual wall clearance probe Gas leak probe, available from December Ambient CO probe Ambient CO2 probe Connection cable Combustion air temperature probe Combustion air temperature probe, immersion depth 300 mm Combustion air temperature probe, immersion depth 190 mm Combustion air temperature probe, immersion depth 60 mm Additional temperature probes Qty. Cases Mini ambient air probe Basic system case for analyser, probes and accessories Basic system case with two levels for analyser, probes and additional accessories Product system case with small plastic boxes without contents, can be interlocked to basic system case Tools system case with tools section without content, can be interlocked to basic system case Universal system case w/o pockets, can be interlocked to basic system case Measurement case (leather) with drawers for instruments and accessories Qty. Spare cells Spare O2 cell Spare CO cell (without H2 compensation) Spare NOlow cell 0 to 300 ppm Spare NO cell 0 to 3000 ppm On request Pipe clamp probe Quick-action surface probe Connection cable Sender Name (Dr,Mr,Mrs,Ms) Position Subject to change without notice. testo Ltd Company Newman Lane Alton Hampshire GU34 2QJ Tel.: Fax: info@testo.co.uk Internet: Address Address County Tel No Postcode Fax No /hd/AC/A/