Stainless, Alloy, Exotics. ASME Code Welding. R, S, and U Stamps. Capital Projects. Turnarounds
|
|
- Linette Hart
- 6 years ago
- Views:
Transcription
1 Stainless, Alloy, Exotics ASME Code Welding R, S, and U Stamps Capital Projects Turnarounds
2 We bring together the talent, skill, experience and resources to make your most challenging projects a success.
3 Drawing from our broad network of talented welders, pipefitters and other craft professionals, Advanced Welding Solutions recruits only the best and tests them to the highest industry standards. With strong financial backing and a core group of project managers, planners, superintendents, CWIs and safety professionals, Advanced Welding Solutions brings together the talent, skill, experience and resources needed to make your most challenging projects a success.
4 Capabilities Turnarounds and Capital Projects Construction Process Piping Fabrication and Installation Heaters / Furnaces Fabrication and Installation Repair and Tube Replacement Boilers Repair and Tube Replacement Cryogenic Cold Boxes Fabrication Onsite Internal Piping and Equipment Repairs Materials Chrome Stainless Hastelloy Inconel Duplex Alloy 20 Monel Aluminum Carbon Steel Titanium
5 The people of Advanced Welding Solutions have a long history of turnaround experience, working on FCCs, hydrocrackers, boilers, heaters, pressure vessels, piping and more. We take 100% ownership of our scope of work, from assisting with pre-project planning to timely completion of the final quality control documents. Our welders are proficient in tig and stick welding with virtually every stainless, alloy and exotic material commonly found in a process plant and work under our more than 200 certified weld procedures: ASME WPS API - 24 WPS D WPS Services Estimating Planning Scheduling Skilled Craft Project Management Safety and QA / QC Subcontracting Project Close-Out
6 Environmental, Health & Safety Our Commitment: No employee suffers any injury in the performance of his or her job. The environment is not negatively impacted by our activities or operations. Our systems and culture are recognized and respected by our industry and clients. Our employees value and employ a full sense of ownership and pride in their Environmental, Health & Safety program. Programs: Injury & Illness Prevention Program (IIPP) Safety Performance EMR TRIR Hours 814,573 1,199,992 1,319,766 Code of Safe Work Practices (CSWP) Four Aces Behavior Based Safety Program Advanced Welding Solutions P: (713) F: (713)
7 Quality Assurance / Control Our welders are proficient in tig and stick welding with virtually every stainless, alloy and exotic material commonly found in a process plant, including: Chrome Stainless Hastelloy Inconel Duplex Alloy 20 Monel Aluminum Carbon Steel Titanium At Advanced Welding Quality Program NBIC R and ASME S and U Code Stamps Comprehensive QA / QC Manuals Documented Procedures for ASME and non-asme Work In-House Welder Qualification 200+ Certified Welding Procedures Weld Reject Rate Outperforms Industry Standards Solutions, we understand that no job is closed out until all the paperwork has been completed. Our project Advanced Welding Solutions P: (713) F: (713) managers, experienced CWIs and Level-1 QC Professionals are held accountable for timely completion and approval of all QC documentation.
8 Workforce Profile Because we recruit only the best welders and test them to the highest industry standards, Advanced Welding Solutions confidently executes projects other contractors may find it hard to staff or manage. We take 100% ownership of our scope of work, from assisting with pre-project planning to timely completion of the final quality control documents. Our welders are proficient in tig and stick welding with virtually every stainless, alloy and exotic material commonly found in a process plant, including: Chrome Stainless Hastelloy Inconel Workforce Summary Core group of 200 welders and pipefitters Additional 400 welders and pipefitters available for deployment Core group of project managers, planners, superintendents, CWIs and safety representatives Duplex Alloy 20 Monel Aluminum Advanced Welding Solutions P: (713) F: (713)
9 Management Team Advanced Welding Solutions has deep ties within the energy, chemical and industrial sectors and maintains a sizable network of relationships that make the company uniquely qualified to provide top tier craft professionals to every project. The company s president, Dale Johnston, has more than 35 years experience in the construction industry, beginning as a craftsman and rising through all positions of supervision and Management Organization Dale Johnston President management. Previously, he has been president of Trey Davis EH&S Tim Choate VP Operations Business Development John Boone QA/QC a craft construction and Site Safety Project Site QA/QC engineering services contractor and a Site Safety Project Site QA/QC major maintenance Site Safety Project Site QA/QC and turnaround contractor. Operations, Tim Choate, has more Advanced Welding Solutions P: (713) F: (713) than 30 years of experience executing
10 Why Choose Advanced Welding Solutions? Advanced Welding Solutions has deep ties within the energy, chemical and industrial sectors and maintains a sizable network of relationships that make the company uniquely qualified to provide top tier craft professionals to every project. Values driven organization with integrity Privately owned and financially secure Experienced, knowledgeable and capable leadership Skilled, trained, reliable workforce Strong safety performance Competitive bids Intense focus on our customers long-term success We want to be your piping and welding contractor of choice. Call today to put our experience to work for you.
11 P: (713) F: (713) A Park Energy Group Inc. affiliated company
QUALITY ASSURANCE SPECIFICATION WELDING HEAT TREATMENT PAGE 1 OF 6
QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 WELDING HEAT TREATMENT PAGE 1 OF 6 1.0 Purpose The purpose of this specification is to establish the minimum quality assurance requirements for
More information"Welder Certification"
"Welder Certification" The purpose of this presentation is to introduce you to the various aspects of welder certification. This is not intended to cover all of the requirements for certification but only
More informationPresented by: Gary Scribner Manager of Technical Services. Shanghai April The National Board of Boiler and Pressure Vessel Inspectors
Presented by: Gary Scribner Manager of Technical Services Shanghai April 2016 1. Provides administrative and technical rules, and guidelines to follow for repairing or altering a pressure retaining item.
More informationNACS. Thermal Plant Solutions. World class thermal plant construction, installation, and maintenance services.
NACS North American Construction Services, Ltd. World class thermal plant construction, installation, and maintenance services. Thermal Plant Solutions Driving Progress PARTNERS IN PRODUCTIVITY Aprocess
More informationWELDING DEPARTMENT CHAIR WELDING INSTRUCTOR: JASON FORAL
WELDING DEPARTMENT CHAIR WELDING INSTRUCTOR: JASON FORAL Phone: 562-860-2451 Ext: 2924 Email: jforal@cerritos.edu Teaching Assignment: Weld 120 and Weld 130 (Only AM Classes) Office Hours: M & W 11:00
More informationU.S. Bellows, Inc. Worldwide Leader in Metallic and Fabric Expansion Joints. Fast Turnaround Repair Replace Refurbish Quick Delivery
Attention Attendees: to listen to the audio portion, check that your speakers or headset are on and turned up OR dial the number and use the access code listed in your confirmation email. Attention P.E.
More informationASME CODE CHANGES 2015 EDITION
ASME CODE CHANGES 2015 EDITION SECTION I 2015 Edition published July 1, 2015, mandatory January 1, 2016. No more addenda. Publish every 2 years. Table A-360 : All ASME standards reference current year
More informationCONSTRUCTION MANAGEMENT
CONSTRUCTION MANAGEMENT AND MANAGER that offers comprehensive management throughout the project, from concept to completion, yielding the greatest possible benefit to the owner. IPS will offer uncolored
More informationASME B31.3 Process Piping
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Fabrication and Installation - 1 Piping Development Process 1. Establish applicable system
More informationPRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings.
Stainless, DUPLEX, Super Duplex flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists
More informationPresented by: Gary Scribner Manager of Technical Services. August The National Board of Boiler and Pressure Vessel Inspectors
Presented by: Gary Scribner Manager of Technical Services August 2016 2 3 PART 3, SECTION 1 REPAIRS AND ALTERATIONS GENERAL AND ADMINISTRATIVE REQUIREMENTS Additional administrative rules can be found
More informationConformity Assessment. Dan Cheetham BPV Requirements 4/12/16
Conformity Assessment Dan Cheetham BPV Requirements 4/12/16 BPV Requirements Boiler and Pressure Vessel Requirements (Quality Control Programs, Materials, Examination & Inspection, etc.) Quality Control
More information+91-8048078804 Prayas Steel & Alloys http://www.stainlesssteelscraps.com/ We are importers, stockiest & suppliers of ferrous, non ferrous metal and scrap. Our range of ferrous & non ferrous metal products
More informationPipeline Oil & Gas Equipment, Inc.
Pipeline Oil & Gas Equipment, Inc. Web Page: www.pipe-equip.com - E-Mail: info@pipe-equip.com Tel: (936) 321 6963 - Fax: (936) 273 5150 WHERE Quality IS OUR, HIGHEST PRIORITY At Pipeline Oil & Gas Equipment,
More informationNR CHECKLIST Rev. 1. QAM IMP References NBIC Part 3, 1.8 Y N Y N a. Organization. Company Name/Certificate Number: Page 1 of 26
Company Name/Certificate Number: Page 1 of 26 a. Organization a.1. Has the Organizational Structure of the program identified the levels of management responsible for the Quality System Program, including
More informationMEC-QW-E-2005 Senior QA/QC Inspector / Test Package Coordinator PERSONAL DATA LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
104126-MEC-QW-E-2005 Senior QA/QC Inspector / Test Package Coordinator Has 10 years experience in the field of inspection and quality assurance / control related to chemical, petrochemical, power plants
More informationgyrolok Flareless Tube Fittings Tubing Data Charts Index
Flareless Tube Fittings Data Charts Index Safety Warning Inside Front Cover Calculating Yield, Burst, and Maximum Allowable Working Pressures 2 Maximum Allowable Stress Values for Material at Various Temperatures
More informationWelding Performance Qualification Test Administrators GUIDE FOR APPLICANTS
BRITISH COLUMBIA SAFETY AUTHORITY Welding Performance Qualification Test Administrators GUIDE FOR APPLICANTS Prepared by: Ed Hurd P.Eng. Provincial Safety Manager, Boilers Date: March 2, 2012 Controlled
More informationPipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines
February 2017 Pipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationES&H Manual Welding and Brazing Supplement
1 Purpose and Scope This supplement provides the requirements for welding and brazing operations performed at Jefferson Lab by employees, users, and temporary contract labor under Jefferson Lab direction
More informationTraining Guide Electric Arc Welding (non code).
Training Guide Electric Arc Welding (non code). Training Guide Objectives: After completing the training the student will be able to; Set up and inspect the Electric are welding power source for electric
More informationJuly 2017 SC 3 Attachments
Table of Contents Attachment Page 1 July 2017 SC 3 Attachments SC 3 Roster July 2017.pdf 2 IN16-0401 Disapproved 3-27-17 3 IN16-0401 Letter Ballot Comments 3-27-17 5 17-135 Petersen 5-2-17 6 17-141 Chaine
More informationThompson Construction Group
Thompson Construction Group Solutions for Industrial Progress Whatever the industry, Thompson is here with the expertise needed for your construction project. Our specialists deliver the highest caliber
More informationGyrolok. Gyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Tubing Data Charts Design HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application
More informationMarley Air Cooled Heat Exchangers
Marley Air Cooled Heat Exchangers SPX: The Informed Choice for the Demands of Today and Tomorrow SPX Cooling Technologies has the experience, engineering expertise and in-factory manufacturing capabilities
More informationWelding Metallurgy Course
Welding Metallurgy Course COURSE OVERVIEW Welding Metallurgy forms an integral part of any business operating in the fabrication and welding environments which sometimes unfortunately commonly become contentious
More informationQuality Control and Quality Assurance for Installation of Steel Deck
s American National standards institute/ steel deck institute QA/QC - 2011 Standard for Quality Control and Quality Assurance for Installation of Steel Deck copyright 2012 steel deck institute 1. General
More informationISO 9001:2008 certified
c ISO 9001:2008 certified 3/14 www.setexproducts.com INTRODUCTION SETE Thermowells serve two primary functions: (1) extend temperature instrument life by protecting sensing elements from harsh process
More informationGuide for AWS Visual Weld Inspection
Guide for Visual Weld Overview & Contents Scope This guide is intended to assist Owner/Operators, Contractors, Authority Having Jurisdiction (AHJ) personnel, Inspectors, Manufacturers and Contractors/Fabricators
More informationConformity Assessment. Dan Cheetham BPV Topics of Interest 2016 Certification 360
Conformity Assessment Dan Cheetham BPV Topics of Interest 2016 Certification 360 BPV Requirements Boiler and Pressure Vessel Requirements (Quality Control Programs, Materials, Examination & Inspection,
More informationSECTION III DIVISIONS 1 AND 2
SECTION III DIVISIONS 1 AND 2 Subject Interpretation File No. Division 1 Appendix N, Table N-1230-1; Damping Values (1998 Edition)... III-1-04-27 NI03-025 Code Cases 2142-1 and 2143-1... III-1-04-22 NI03-019
More informationJOHN WOOD UNCONTROLLED COPY: THE JOHN WOOD COMPANY PO BOX HIGHLAND AVENUE OAKS, PENNSYLVANIA 19456
JOHN WOOD QUALITY CONTROL SYSTEM MANUAL FOR PRESSURE VESSELS CONSTRUCTED TO ASME BOILER & PRESSURE VESSEL CODE SECTION VIII, DIVISION 1 AND REPAIRS AND ALTERATIONS TO METALLIC PRESSURE RETAINING ITEMS
More informationmarcegaglia RU Vladimir
marcegaglia RU Vladimir Marcegaglia RU 70 000 sqm total area 14 000 sqm first phase covered area Vladimir St. Petersburg Moscow 42 000 sqm for development (covered) 25 000 t/y tube manufacturing capacity
More information#.# Section Modified and Revision Description Date Author 1.0 Initial release 7/13/2011 Celine McCulloch
Approved by: Awet Tesfagiorgis Supplier Quality Engineer Ravi Bhatla Supplier Quality Engineer Ashley Weatherington QMS Quality Leader Document Revision Chart The following chart lists the revisions made
More informationPressure Equipment Repair and Alteration Requirements
the pressure equipment safety authority Pressure Equipment Repair and Alteration Requirements AB-513 Edition 3, Revision 0 - Issued 2018-01-30 Table of Contents FOREWORD... iii 1.0 INTRODUCTION... 1 2.0
More informationPressure Piping Construction Requirements
the pressure equipment safety authority Pressure Piping Construction Requirements AB 518 Edition 8, Revision 0 Issued 2017-08-24 Table of Contents FOREWORD... 1 1.0 SCOPE OF THIS DOCUMENT... 2 2.0 DEFINITIONS
More informationKEL-GOR LIMITED FABRICATION, INSTALLATION, MAINTENANCE & PROJECT MANAGEMENT
KEL-GOR LIMITED FABRICATION, INSTALLATION, MAINTENANCE & PROJECT MANAGEMENT STRUCTURAL STEEL & PLATE WORK CSA W47.1 PRESSURE VESSELS ASME SECT VIII ASME B31.1 & B31.3 PRESSURE PIPING MODULAR PROCESS UNITS
More informationDiaphragm seal with flange connection With internal diaphragm Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm Model 990.26 WIKA data sheet DS 99.26 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising
More informationMANUFACTURING SOLUTIONS FOR FORMING, JOINING AND ASSEMBLY AEROSPACE APPLIANCE AVIATION AUTOMOTIVE BEVERAGE DEFENSE ENERGY HEAVY EQUIPMENT
MANUFACTURING SOLUTIONS FOR FORMING, JOINING AND ASSEMBLY AEROSPACE APPLIANCE AVIATION AUTOMOTIVE BEVERAGE DEFENSE ENERGY HEAVY EQUIPMENT Manufacturing Your Success WHAT WE DO Coldwater Machine Company
More informationQA/QC Program Overview. November, 2015
QA/QC Program Overview November, 2015 Quality Roles on the Project Construction Management Oversight (CMO-Turner) functions as the TJPA s eyes and ears. Construction Manager/General Contractor (CM/GC-
More informationWELDING TECHNOLOGY. Contact Information. Overview. Degrees/Certificates. Faculty. Certificate of Achievement
Technology 1 WELDING TECHNOLOGY Contact Information Division Liberal Arts Dean Anne Fleischmann (Interim) Associate Dean Lynn Medeiros (Interim) Division Office W 107, Rocklin Campus Overview The Technology
More informationMETHOD STATEMENT FOR PIPE WELDING WORKS
METHOD STATEMENT FOR PIPE WELDING WORKS Introduction This Method statement describes in detail the welding process for pipe work and the welder s qualification test procedures. This includes addressing
More informationULMA Piping. We don t just manufacture, We partner.
ULMA Piping We don t just manufacture, We partner. 02 ULMA Piping 01 ULMA Piping ULMA Piping is a world-class manufacturer with a long tradition of efficiency and excellence. We manufacture and supply
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationQuality supervision (QS) and material testing
NEWSLETTER August 2010 Quality supervision (QS) and material testing Success of a project or investment heavily depends on the ability to receive ordered material at the right time and within the expected
More informationTitanium Production Tubing for HPHT Oil & Gas Wells. Jonathan Parry Chevron Jim Grauman TIMET
Titanium Production Tubing for HPHT Oil & Gas Wells Jonathan Parry Chevron Jim Grauman TIMET Overview Titanium alloy seamless pipe manufacturing & application Titanium advantages over high chrome/nickel
More informationContinuous Corrosion and Erosion Monitoring in Geothermal Power Facilities
Proceedings World Geothermal Congress 2015 Melbourne, Australia, 19-25 April 2015 Continuous Corrosion and Erosion Monitoring in Geothermal Power Facilities Tom Fuggle Permasense Limited, Century House,
More informationContents. About Us 2. Engineering Services 3. Design 4. Welding Inspection and Engineering Services 5. Rope Access NDT 6
Contents About Us 2 Engineering Services 3 Design 4 Welding Inspection and Engineering Services 5 Rope Access NDT 6 Audit, QA&QC Expediting Services 7 Supplier Audits 8 Owner Representation 9 PED&TPED
More informationGeneral Information, Industrial Thermocouple Section
INDUSTRIAL THERMOCOUPLES INDEX PAGE General Information... I1 Straight Base Metal Thermocouple Elements (IA)... I2 Angled Base Metal Thermocouple Elements (IB)... I3 Noble Metal Thermocouple Elements (IC,
More informationCQ ENGINEERING a Division of
CQ ENGINEERING a Division of TECHNICAL INNOVATION ENGINEERING INSPECTION The CQ Group, LLC A Full Service Engineering Firm Specializing in High Tech Design and Innovation for Industrial and Manufacturing
More informationKÖNIG + CO. FORMING KNOW-HOW
FORMING KNOW-HOW FORMING KNOW-HOW 2 3 FORMING KNOW-HOW 4 Bödenpresswerke. Committed to tradition. Focus on the future. KÖNIG + CO. GmbH is an owner-managed family company with a history of more than eighty
More informationMaterials and Qualification Procedures for Ships
Materials and Qualification Procedures for Ships Approval of Works for the Manufacture of Fusion Welded Pressure Vessels Revision 4, July 2015 Page 1 of 17 Lloyd s Register Group Limited, its subsidiaries
More informationALL METALS & FORGE GROUP
ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.
More informationWho We Are. Located near Port, Rail and Road transportation links, Maritime Welding Inc. can deliver world-class steel fabrication services worldwide.
Who We Are Maritime Welding Inc., established in 1969, is a fully equipped metal fabricating shop staffed by a well trained flexible and knowledgeable workforce. Our shop located in Northern New Brunswick
More informationChrome Moly flanges and fittings
Chrome Moly flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists of a complete range
More informationCapability Statement
Capability Statement Contents 1. About Us 2. Company Overview 3. Company Information 4. Personnel 5. Facilities 6. Pressure Piping & Vessels 7. Structural Steel 8. Labour Hire 9. Quality Assurance 10.
More informationPART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS
PART UIG THE ASME CODE FOR IMPREGNATED GRAPHITE PRESSURE VESSELS Presented by: Ed Soltow Engineering and Design Manager SGL Carbon Technic LLC Member ASME Standards Committee on Pressure Vessels (BPV VIII)
More informationThe Master of Master Distribution
The Master of Master Distribution Stainless and Special Metals Pipe and Tubing Pipe Fittings Pipe Flanges Valves Supplying stainless products to industrial distributors since 1963 MASTER OF MASTER DISTRIBUTION
More informationnalcofabtech.com A Nalco Champion Company
nalcofabtech.com A Nalco Champion Company 2 CONTENTS Goal Zero - Safety Culture...4 About Us...6 Capabilities...8 Services...24 Equipment and Facilities... 36 3 4 At Nalco FabTech, our programs ensure
More informationAdvanced Manufacturing, Sustaining Engineering and Logistics Services
Advanced Manufacturing, Sustaining Engineering and Logistics Services m With over 65 years of experience, Moog Inc. is best known as a worldwide designer, manufacturer, and integrator of precision motion
More informationQuality Assurance Policy and Procedures
650 Montana Ave, Suite A Las Cruces, NM 88001 (575) 522-0430 www.rmgovernmentservices.com Quality Assurance Policy and Procedures PURPOSE. The purpose of this policy is to outline the quality assurance
More informationECONOMIZER ECM. Turnkey Price Installed: $115,295
ECONOMIZER ECM Turnkey Price Installed: $115,295 PRICE INSTALLED PER INVESTMENT GRADE AUDIT. CALCULATED ANNUAL SAVINGS OF $29,027.51 WITH A SIMPLE PAYBACK OF 3.97 YEARS. (SEE ATTACHED SAVINGS CALCULATIONS)
More informationStandard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology 1
Designation: E 1025 98 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr., West Conshohocken, PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Practice for
More informationTaricco Corporation. Taricco Corporation
LARGE SCALE CAPITAL EQUIPMENT Thermal Process Systems is an established OEM that specializes in producing thermal process systems, such as A.S.M.E. Div 1and Div 2, Section VIII and National Board registered
More informationCOMPANY PROFILE. We are big enough to do any job and small enough to be responsive!
COMPANY PROFILE NATURE OF BUSINESS Global Fabrication and Maintenance (Pty) Ltd is a Broad Based Black Economic Empowerment (BBBEE) company involved with a wide range of repetitive steel fabrication, plant
More informationAPI-582. a practical approach for industrial welding practices. All rights reserved to thepetrostreet team
Recommended Welding Guidelines API-582 a practical approach for industrial welding practices By The PetroStreet Team CONTENTS Key Sections: Θ Section 6 WELDING CONSUMABLES Θ Section 7 SHIELDING AND PURGING
More informationExternal Quality Assessment Are You Ready? Institute of Internal Auditors
External Quality Assessment Are You Ready? Institute of Internal Auditors Objectives Describe frameworks used to assess the quality of an IA activity Discuss benefits, challenges, and success factors related
More informationInconel Ni-Cr-Fe Alloys Incoloy Fe-Ni-Cr Alloys Monel Ni-Cu alloys
Corrosion resistant alloys for oil and gas industry Inconel Ni-Cr-Fe Alloys Incoloy Fe-Ni-Cr Alloys Monel Ni-Cu alloys Heanjia Super-Metals Co., Ltd was established in 1984 in Beijing, China. With the
More informationa. Are the foundry s employees trained and familiar with portions of the system applicable to their position?
NAV 29 FOUNDRY OPERATIONS 1. Does the foundry have a documented quality system? a. Are the foundry s employees trained and familiar with portions of the system applicable to their position? b. What recognized
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More informationRakes and Kiel Probes for Airfoil Instrumentation
Rakes and Kiel Probes for Airfoil Instrumentation Product general information Rakes and Kiel Probes skillfully positioned onto static and rotating airfoils offer the benefit of obtaining many separate
More informationX-MET8000. Trust but verify: Ensure product quality with Oxford Instruments latest handheld XRF analyser
QUALITY Trust but verify: Ensure product quality with Oxford Instruments latest handheld XRF analyser Fast and reliable grade identification and alloy elemental composition analysis for the: Incoming inspection
More informationGas Transmission and Distribution Piping Systems
ASME B31.8-2007 (Revision of ASME B31.8-2003) Gas Transmission and Distribution Piping Systems ASME Code for Pressure Piping, B31 AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS
More informationWHAT IS REFRACTORY? Its Uses / Installation Methods / Anchoring Systems
ASSET INTEGRITY INTELLIGENCE WHAT IS REFRACTORY? Its Uses / Installation Methods / Anchoring Systems JACKSON ESPINOZA, Refractory Division Manager at Sentinel Integrity Solutions VOLUME 22, ISSUE 4 JULY
More informationM. F. Sullivan. 9/27/2016 Dr. Sandor Somogyi
The Code is a large document and it is sometimes very difficult to understand. Even for many of us who work with it every day. In my opinion there is no one person who could be termed as a Code Expert.
More informationDiaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
More informationAmerican Welding Society Nashville Section. Welding Procedure Development
American Welding Society Nashville Section Welding Procedure Development AWS & ASME Welding Procedures Welding Procedure Specification (WPS) Written document that provides direction to the welder for making
More informationACCREDITATION CRITERIA FOR FABRICATOR INSPECTION PROGRAMS FOR STRUCTURAL STEEL AC172. April 2017 (Effective June 1, 2017) PREFACE
ACCREDITATION CRITERIA FOR FABRICATOR INSPECTION PROGRAMS FOR STRUCTURAL STEEL April 2017 (Effective June 1, 2017) PREFACE The attached accreditation criteria have been issued to provide all interested
More informationWelding Inspection Technology. rican Welding Society
Welding Inspection Technology rican Welding Society G gp NOLOGY FOURTH EDITION 2000 Published By American Welding Society Education Department American Welding Society able of Contents Module Title Page
More informationMETAL PRODUCTS PIPELINE ENGINEERING. Engineered Products for the Pipeline Pigging and Flow Assurance Industry
METAL PRODUCTS 1 2 3 PIPELINE ENGINEERING Engineered Products for the Pipeline Pigging and Flow Assurance Industry Engineered Products for the Pipeline Pigging and Flow Assurance Industry Pipeline Engineering
More informationESS. Energy Systems Service Pte. Ltd. Company Registration No W
Project & Quality Surveillance Production and Project Quality Surveillance Fabrication and Field Service Coating, Welding Supervision and Inspection / NDT (UT, LPT, MT, VT) We support on challenging task
More informationHigh Energy Piping Inspection Program for Power Generation and Process Industries. For Regulatory Compliance, Safety, and System Longevity
High Energy Piping Inspection Program for Power Generation and Process Industries For Regulatory Compliance, Safety, and System Longevity EAPC Industrial Services offers an inspection plan for assessment
More informationThe cost of quality. Metals Conference Dr Michail Karpenko General Manager NZWC, HERA Alan McClintock Senior Welding Engineer, HERA
Metals Conference 2017 The cost of quality Dr Michail Karpenko General Manager NZWC, HERA Alan McClintock Senior Welding Engineer, HERA The New Zealand submarine Platypus The Platypus was designed by Monsieur
More informationSTOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon
More informationGLOBAL INTERNATIONAL SERVICES MATERIAL INSPECTION CONTROL
GLOBAL INTERNATIONAL SERVICES MATERIAL INSPECTION CONTROL 1 GIS MIC at a glance Created in 2008, GIS MIC is a company specialized in technical assistance services, inspection, NDT, quality and metallurgical
More informationCUSTOM FABRICATION GREAT LAKES SHIPYARD
CUSTOM FABRICATION 2014 GREAT LAKES SHIPYARD BUILDING OUR REPUTATION FOR MORE THAN A CENTURY NEW BUILD BY NEW BUILD. 1 OVERVIEW...3 FACILITIES & EQUIPMENT...5 INDUSTRIES...7 CAPABILITIES...8 PRODUCTS &
More informationCoating Application Specialist (CAS): The New Standard for Quality, Safety, and Reliability in Industrial Painting. White Paper. v2.
White Paper Coating Application Specialist (CAS): v2.0 The New Standard for Quality, Safety, and Reliability in Industrial Painting Copyright 2013 by the Finishing Solutions Network Abstract The costs
More informationINVITATION to BID. 11:00 a.m.
L E G A L N O T I C E INVITATION to BID The Town of Ridgefield invites all interested parties to submit sealed bids on the following: Bid DUE DATE: June 22, 2017 Bid DUE TIME: Bid ITEMS: 11:00 a.m. Aluminum
More informationPiping at Static Cryogenic Vessels according to EN and EN / AD2000 Merkblatt IGV Position Paper IGV-PP-05B-Rev1-E
Piping at Static Cryogenic Vessels according to EN 13458 and EN 13480 / AD2000 Merkblatt IGV Position Paper Ind Industriegaseverband e.v. Französische Str. 8 10117 Berlin Telefon: 030 206 458-800 Telefax:
More informationAt Elliott Group, we are committed to providing each customer with the best possible solution to the challenges they face. Japan
Elliott Group 2 The world turns to Elliott Companies around the world choose Elliott Group to design, manufacture and service their critical turbomachinery. For more than 100 years, Elliott has been synonymous
More informationMESSAGE FROM BOARD WE ASSURE THE BEST OF THE SERVICES!!! Sincerely. Talal al fareji General Manager
MESSAGE FROM BOARD Our sincere thanks to ALLAH and those who are supporting our Business activities of the company. We focus completely on our customer satisfaction. We value for their money '' Our unique
More informationEnergy Systems Service Pte. Ltd. Company Registration No W
Project & Quality Surveillance Production and Project Consulting Production and Field Service Coating, Welding Supervision and Inspection / NDT (UT, LPT, MT, VT) Supplier Quality Assessment, Coating Inspection,
More informationEngel Diversified Industries Inc.
Engel Diversified Industries Inc. PO Box 85 1060 Quaker Avenue Jordan, MN 55352 Represented by: Duane Jaworski & Associates 763-792-2184 Toll Free 877-562-5070 Fax 763-785-9065 Toll Free 877-280-2087 EDi
More informationFUSION MIDDLE EAST COMPANY PROFILE
FUSION MIDDLE EAST COMPANY PROFILE FUSION MIDDLE EAST COMPANY PROFILE Fusion is a specialist MEP Contractor with offices in Middle East and Asia. We provide our clients with highly skilled technicians
More informationWelding CIP Code
Welding CIP Code - 480508 Courses Required Course Course Title Lec Lab Tot Cr Clock The following program course listings and exit points are nonsequential and delivered depending on industry need and
More informationNAVIGATING ASME SECTION VIII (DIV.1): MANAGING YOUR PRESSURE VESSELS - PART 1 FEATURING:
January/February 2014 Volume 20, Issue 1 Since 1995, Inspectioneering Journal has provided the oil & gas and chemical industries with information to help optimally manage equipment risk and reliability,
More informationDBI-SALA Uni 8 Overhead Horizontal Lifeline Cable System SECTION HORIZONTAL FALL PROTECTION - OVERHEAD CABLE
SECTION 112429.18 - HORIZONTAL FALL PROTECTION - OVERHEAD CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide overhead horizontal cable fall protection system, including end anchors, energy absorbers,
More informationNuclear Fabrication Supply Chain
Nuclear Fabrication Supply Chain The American Nuclear Energy Revival Briefing Series - Building the Supply Chain and Workforce for the New Generation Nate Ames NFC Director 614.688.5135 names@ewi.org NFC
More informationAMERICAN WELDING SOCIETY NATIONAL ACCREDITED TESTING INFORMATION
West Kentucky Community & Technical College AMERICAN WELDING SOCIETY NATIONAL ACCREDITED TESTING INFORMATION AMERICAN WELDING SOCIETY NATIONAL ACCREDITED TESTING INFORMATION FAQ: FREQUENTLY ASKED QUESTIONS
More information