KEL-GOR LIMITED FABRICATION, INSTALLATION, MAINTENANCE & PROJECT MANAGEMENT
|
|
- Horace Barker
- 6 years ago
- Views:
Transcription
1
2 KEL-GOR LIMITED FABRICATION, INSTALLATION, MAINTENANCE & PROJECT MANAGEMENT STRUCTURAL STEEL & PLATE WORK CSA W47.1 PRESSURE VESSELS ASME SECT VIII ASME B31.1 & B31.3 PRESSURE PIPING MODULAR PROCESS UNITS HEAT RECOVERY UNITS ASME SECT I FIRED HEATERS AND CRACKING FURNACES Office: Fax: Plank Road, Sarnia, ON N7T 7H3 PO Box 2253, Sarnia, ON N7T 7L7
3 President s Message Our goal is to provide a safe and healthful workplace for all of the stakeholders in our business. This will be accomplished through a cooperative effort between all members of the Kel-Gor team and our stakeholders as appropriate. Safety comes first. Kel-Gor Limited is committed to a workplace environment of respect and dignity and sets clear policies on Workplace Harassment and Workplace Violence. We find ourselves in a changing technological environment. Maintaining a tradition of excellence in such an environment is difficult and challenging, yet we at Kel-Gor Limited intend to meet that challenge. We will keep our position at the forefront of technology. This will be achieved through continual improvement of both our physical plant and management methods. We pride ourselves on the fact that we meet our commitments, both contractual and scheduled. Our customers demand timely completion, high quality work and recognize its value. Our ability to live up to commitments is dependent, to a high degree, upon our employees. We believe that if an employee of any rank is provided with the correct information, appropriate tools and a good environment to work in, then that employee will produce an above average quantity of timely, quality work. We also believe that productive and quality-conscious employees take pride in their efforts and enjoy the favourable response of well served customers. This time-proven belief is one of the ways we, at Kel-Gor Limited, improve both the quality of life for our employees and the services rendered to customers. Kel-Gor Limited will continually improve its operations. Whether these improvements are in the human resources, management systems, planning and scheduling techniques, state of the art tools, or new methods and products, all will be done with a single aim to enable us to better serve you our customer. Please feel free to contact me directly if you have any questions or wish to know more about Kel-Gor Limited. Chris Thomas, P.Eng. PresidentTel: (519) x cthomas@kelgor.com
4 Table of Contents Section Introduction 1 Capabilities 2 Safety 3 Quality 4 Power Piping 5 Tanks & Vessels 6 Modules 7 Power Plants 8 Project Profiles 9 Contacts 10
5 1 Kel-Gor Limited Introduction
6 1.0 Kel-Gor Limited - Introduction Established in 1969 following a merger with its predecessor, The L.Gordon Company, Kel-Gor Limited is a privately owned Canadian multi trade company providing a single source for Industrial fabrication and installation. The strength of the company stems from the vast experience of its people, the integration of skilled trades, and its dedication to total control through planning and monitoring techniques. Kel-Gor Limited is also unique in its capacity for total project control. In order to achieve this, our projects are planned, scheduled and monitored from beginning to end by computer driven scheduling systems. Kel-Gor Limited maintains control over each phase of every project to complete each one on schedule. With over 60,000 sq. ft. of production space, we have the capability and capacity to handle the most sophisticated fabrication assignments, and our computerized scheduling capabilities ensure our ability to complete your project within the projected timeframe. The Company employs mechanical engineers and quality assurance personnel, affording us the capability of fulfilling customer design requirements plus a quality product that meets the customer s specifications. Kel-Gor Limited, through the years has established and earned a reputation for high quality workmanship, engineering excellence, operational flexibility and efficiency, plus timely project completion. Kel-Gor Limited is pre-qualified and maintains a company profile with ComplyWorks, ISNetworld and PICS Auditing.
7 2 Kel-Gor Limited Capabilities
8 2.0 Kel-Gor Limited Capabilities Nearby docking facilities on the St. Clair River are accessible to ships and seagoing vessels for shipment of equipment that is too large for road or rail transportation, or for products destined for overseas. Kel-Gor Limited has utilized water shipment to transport both oversized vessels and overweight fabricated units. Fabrication Our fabrication facility exceeds 60,000 square feet of production space dedicated to serving our clients with the highest quality standards in pipe, module, column, cold box and pressure vessel fabrication. The facility is the epitome of the term state of the art and is readily accessible by road, rail and water. Our computerized business system encompasses estimating, planning, scheduling and quality assurance monitoring. Most significantly, our experienced, dedicated workforce is well trained for this sophisticated environment ensuring precise components which facilitate and produce products of superior quality. Kel-Gor Limited boasts quality products in all materials, including mild steel and stainless steel, nickel, Inconel, chrome-moly, aluminum and clad, varying in thickness from gauge to multiple inches. Product design codes include ASME B31.1, B31.3, ASME Section I, ASME Section V, ASME Section VIII Division 1 and Division 2, National Board NB, National Board R, TSSA Fuel Gas and CWB CSA W47.1 Our fine-tuned Quality Program, approved by TSSA-Ontario, ABSA-Alberta & ASME in combination with the continuous upgrading of equipment and personnel skills, ensures our clients of a high quality product. All modes of transportation are available with ready access to road, rail, air and water for finished products. Modular Fabrication Modular fabrication is another of the highly specialized fields in which Kel-Gor Limited consolidates and utilizes its wealth of in-house expertise. Structural frame fabrication, piping, pressure vessels, equipment setting, electrical systems, instrumentation and testing are but a few of the fields we draw on proven strengths to create high quality, finished products.
9 Modular Fabrication (continued) We at Kel-Gor Limited have, with great success, completed a variety of modular contracts for delivery throughout the world. Among these are modules used for: Air liquefaction/separation Cryogenic air distillation columns for oxygen, nitrogen, and argon Hydrogen purification Chlorine dioxide Catalyst reclamation Oil / water purification Ammonia Freon Food quality starch Kel-Gor regularly manufactures Cryogenic Cold Boxes for air separation plants. These plants operate at temperatures 200F below zero; aluminum and stainless steel are used for the columns, piping and instrumentation systems. Special materials, highly specialized welding techniques, documented quality control and meticulous attention to detail are mandatory since the units cannot be maintained or repaired while operating. Kel-Gor has demonstrated, time and time again throughout our many years of modular experience, the expertise to maintain maximum high quality standards. These proven standards are considered an absolute prerequisite for the successful fabrication and assembly of modular units. Welding Kel-Gor Limited has over 490 welding procedures registered with regulatory agencies including TSSA - Ontario and ABSA - Alberta as well as over 25 welding procedures registered with the Canadian Welding Bureau.
10 Field Construction We perform many capital work projects for our clients in addition to our fabrication, shutdowns and maintenance services. Some of the largest projects in Sarnia in recent years have been performed by Kel-Gor Limited. We will work with our clients on firm prices to perform work safely and on time, including: Health and safety program; Quality Control Productivity Planning and scheduling; Procurement; Subcontractor management; Installation; Systems pressure testing; Systems turnover & commissioning Start-up with Operations Project Management Kel-Gor Limited will manage the planning, procurement, fabrication and site installation of any project for our clients. We manage greenfield projects, restoration and T/A work for refineries, chemical processing, air separation and power producers complete with fabrication and installation for a complete project service. We plan and schedule your scope of work and in addition to our own direct hire trades, we will hire and/or manage the required subcontractors for our clients. Kel-Gor Limited has sufficient project management personnel that we can accommodate multiple projects at any given time. We will start by breaking out the fabrication, preinstallation and installation scopes of work so the schedules and personnel required can be addressed in a comprehensive schedule. Our success has shown how we can consistently finish projects, safely and on time, within planned budgets to give our Clients the confidence they require to plan and execute projects within their business plan.
11 3 Kel-Gor Limited Safety
12 HEALTH AND SAFETY POLICY At Kel-Gor we recognize our obligation to protect the health and safety of our employees, our Clients, and anyone else who may be affected by our activities, as a primary responsibility. Moreover, we believe that strong safety programs and exemplary safety performance makes good business sense in terms of reduced costs and improved productivity Excellent safety performance results from the same effective management that produces good service and high quality product. We shall ensure, as a minimum, compliance with applicable laws and industry codes as well as applicable Client safety requirements. Beyond compliance, our goal is to avoid preventable injuries and to achieve and maintain excellence in health and safety performance by conforming to a safety program emphasizing management commitment, employee involvement, training, prevention, protection, and performance monitoring. In addition, the Kel-Gor safety program is based on the concept of continuous improvement. Protection of health and safety will permeate our planning and our activities and be a primary consideration in all we do. All employees must accept their responsibilities under this program, to ensure that safe working conditions and practices are maintained. This responsibility includes the need to work cooperatively and positively with various groups, including our Clients, Joint Health and Safety Committees, and the Ministry of Labour. We expect our goal of excellence to be achieved through the support and active participation of all employees. The use of alcohol and/or drugs can have a serious negative impact on the health and safety of the user and others. Kel-Gor s Alcohol & Drug Policy has been established to minimize the workplace risks associated with alcohol and/or drug use. This policy is, therefore, an important complement to our health and safety program. Our goal is to provide a safe and healthful workplace for all of the stakeholders in our business. This will be accomplished through a cooperative effort between all members of the Kel-Gor team and our stakeholders as appropriate. Kel-Gor Limited is committed to a workplace environment of respect and dignity and sets clear policies on Workplace Harassment and Workplace Violence. NOTHING WE DO IS WORTH AN INJURY!
13 4 Kel-Gor Limited Quality
14 QUALITY MANUALS AND CERTIFICATES QUALITY MANUALS AND CERTIFICATES ISSUE 7 Kel-Gor Limited Quality Manual - TSSA 11-May-2018 AQP-1561 Kel-Gor Limited Quality Manual ABSA 26-July-2018 ASME 31,951 ASME S Manufacture & Assembly Power Boilers 11-May ,776 ASME U Manufacture of Pressure Vessels 11-May ,514 ASME U2 Manufacture of Pressure Vessels 11-May-2018 NATIONAL BOARD NB Mark for S, U work 11-May-2018 R-7777 R for Alteration 11-May-2018 CWB KELG01 CSA W47.1 Division Aug-2016 ONTARIO - TSSA BOILERS & PRESSURE VESSELS QA Fab & Assembly to CSA B51 & ASME B May-2018 QA Fab & Assembly to CSA B51 & ASME B May-2018 QA Man r to CSA B51 & ASME Section I 11-May-2018 QA 239 Man r to CSA B51 & ASME Section VIII Div 1 11-May-2018 QA Man r to CSA B51 & ASME Section VIII Div 2 11-May-2018 QA Repairs & Alterations to CSA B51 11-May-2018 QA Hot Tap Welding 11-May-2018 ONTARIO - TSSA FUEL SAFETY (NATURAL GAS) Fuel Safety Program Heating Fuels 30-June-2016
15 Quality Assurance Program We have an established quality assurance program, designed to CSA B51 and ASME Code with a full time Quality Assurance staff. Our certifications are as follows: ASME S Certification for Section I Power Boilers and Boiler Proper Piping U Certification for Section VIII, Division 1 Pressure Vessels U2 Certification for Section VIII, Division 2 Pressure Vessels NATIONAL BOARD NB Stamp for ASME S, U, U2 work R-7777 for Alterations TSSA (Ontario) Boilers and Pressure Vessels Safety Division ASME Section I - Power Boilers ASME Section VIII, Div. 1 - Pressure Vessels ASME Section VIII, Div. 2 - Pressure Vessels ASME B31.1 Power Piping ASME B31.1 External Boiler Piping ASME B31.3 Process Piping TSSA (Ontario) Fuel Safety Program Fuel Safety Program Heating Fuels Canadian Welding Bureau - CSA Standard W47.1, Div. 1 for welding of structural steel ABSA (Alberta) Boilers and Pressure Vessels Safety Division ASME B31.1 Power Piping ASME B31.1 External Boiler Piping ASME B31.3 Process Piping Certified Welding Procedures We are certified by the Ontario TSSA Boilers and Pressure Vessels Safety Division to weld piping and pressure components in various metallurgies. We have numerous welding procedures registered and welders qualified under Section IX of the ASME Boiler and Pressure Vessel Code. The metallurgies include various ferrous and non-ferrous materials, from impact-tested steels to high-temperature high-strengths alloys: Carbon Steel up to 8 thick Chrome Moly Alloy up to 3/4 thick Stainless Steel up to 8 thick Nickel Alloy up to 3/4 thick Aluminum up to 1 3/8 thick Copper Welding processes certified include SMAW, SAW, GMAW, GTAW, FCAW, and Brazing.
16 5 Kel-Gor Limited Power Piping
17 5.0 Kel-Gor Limited Power Piping Kel-Gor Limited fabricates pressure piping to ASME including B31.1 and B31.3 Codes. We also fabricate for Section I boiler proper piping. Our services can include field routing, field measuring, support and bracing recommendations, material takeoffs, procurement and reconciliation, shop drawing preparation, fabrication of pipe spools and installation. We can be your "one stop" for field checking, isometric shop drawing preparation, purchasing, material control, fabrication, installation and turnover documentation. ASME - B31.3 Piping The majority of our fabrication is to ASME B31.3 and all materials are received, checked and the spools are fabricated in our 1411 Plank Road shops to the requirements of our Kel-Gor Limited Quality Manual. ASME - B31.1 Piping & Boiler External Piping We can fabricate and test to ASME B31.1; including the NDE, visual inspection and all necessary records to meet this Code. ASME Section I - Boiler Proper Piping Kel-Gor Limited holds an ASME Section I S stamp and can design and fabricate Boiler Proper Piping to the requirements of the Code, TSSA, and CSA B51.
18 Contract: Air Products and Chemicals, Inc. 82 MMSCFD Hydrogen Plant, Sarnia, Ontario Fabrication and installation of pipe rack and equipment modules; fabrication and installation of reformer, ducts and stack; fabrication and installation of all piping; installation of equipment supplied by APCI. $18,500, (CDN) Year: 2006
19 6 Kel-Gor Limited Tanks & Vessels
20 6.0 Kel-Gor Limited Tanks & Vessels Examples of Kel-Gor projects of tanks and vessels > NOVA Chemicals COP2E Project Pressure vessels 15 diameter by 57 FA-2163 Process Water Surge Drum (1-1/8 thick CS) 12 diameter by 40 FA-2165 Backwash Water Return Drum (1-1/8 ; 1 thick CS) 15 diameter by 40 FA-2501A PRC 1 st Stage Suction Drum (1-1/8 thick Charpy CS) > BioAmber Canada BioConverters (three) 28 diameter by 70 SS construction shop fabricated and site installation long trayed tower; CS > NOVA Chemicals C2 Fractionator 13 diameter by 265 long trayed tower; CS construction > Imperial Oil - ESSO T-9650 SWIS Tower 6-6 diameter by 100 long trayed tower; 304SS clad CS tower > Shell Canada FCCU Disengager Fabricate Disengager and cyclones 16 diameter by 40 long; P11 construction > Shell Canada Girbitol Tower 4 diameter by 45 long trayed tower; HIC CS construction > Praxair Pre-Purifier Vessels (two) 16 diameter by 60 long; CS construction > Praxair Separation Column 5 diameter by 40 long trayed column; aluminum construction > NOVA Chemicals Demethanizer 16 diameter by 180 long trayed tower; SS construction > NOVA Chemicals Styrene Tower 18 diameter by 240 long packed tower; CS construction > NOVA Chemicals Styrene Reactor 19 diameter by 60 long; SS construction > Shell Canada Crude Tower Partial replacement 16 diameter by 60 long; Inconel clad CS construction
21 Contract: NOVA Chemical / WorleyParsons ASME Section VIII Div. 1 design, fabrication and installation of three vessels for the Corunna expansion. FA-2163 Process Water Surge Drum; FA-2165 Backwash Water Return Drum; FA-2501A PRC 1 st Stage Suction Drum $ 1,500, (CDN) Year: 2016
22 BioAmber Canada. Fabrication and Installation of BioConverters ASME Section VIII Div. 1 design, fabrication and installation of three BioConverters for the Sarnia 30,000 MT Succinic Acid Production Facility. Contract: $4,000, (CDN) Year: 2014/2015
23 Contracts: Suncor Ethanol Interior of SS storage tank $ 500, (CDN) Year: 2010
24 Contracts: Suncor Ethanol Design and Fabrication of Fermenter Tanks $ 3,200, (CDN) Year: 2010
25 Contracts: Praxair Design and Fabrication of Aluminum Pressure Vessel, as part of modular assembly with aluminum piping. $ 500, (CDN) Year: 2009
26 Contracts: NOVA Chemicals Design and Fabrication of Demethanizer Tower $ 2,100, (CDN) Year: 2004
27 7 Kel-Gor Limited Modules
28 Shell Canada Sarnia Manufacturing Centre Fabrication of pipe spools, steel and assembly of exchanger module complete with insulation, electrical and instrumentation. Installation during the Fall CAT T/A. Contract: $ 200, (CDN) Year: 2016
29 Contract: Air Products and Chemicals, Inc. Pipe & equipment modules for Hydrogen Plant in Fort Saskatchewan, Alberta. Fabrication of forty-two modules including spooling, welding and installation on module of all piping, valves, heat tracing, insulation, electrical and instruments including installation at Fort Saskatchewan, Alberta. $34,000, (CDN) Year: 2015
30 Contract: United Refining Company Fabrication of pipe spools, modules, insulation and electrical/instrumentation for fourteen modules. Fabricated in Sarnia, Ontario and shipped by truck to Warren, Pennsylvania. $3,200, (CDN) Year: 2015
31 Shipping: Kel-Gor Limited can assist with planning and logistics of shipping, transportation and site erection of your modular process units. We can arrange to ship by truck, by rail and by water.
32 Contract: Air Products and Chemicals, Inc. Pipe & equipment modules for Hydrogen Plant in Detroit. Fabrication of twelve modules including spooling, welding and installation on module of all piping, valves, heat tracing, insulation, electrical and instruments including delivery to barge on St Clair River; largest was 150 tons. $9,000, (CDN) Year: 2011
33 Contracts: Praxair Canada Inc. Fabrication and installation of modular cold boxes for xenon; fabrication and installation of cryogenic aluminum piping and vessels; installation of equipment supplied by Praxair. $ 700, (CDN) Year: 2009
34 Contract: Air Products and Chemicals, Inc. PSA skid for Hydrogen Plant, Fort Saskatchewan, AB. Fabrication of three PSA modules; fabrication and installation on module of all piping, valves, electrical and instruments. $1,300, (CDN) Year: 2006
35 Contract: Suncor Energy DHT skids for Millennium Project, Suncor Sarnia, ON. Fabrication of structural modules; fabrication and installation on modules of all piping, valves, electrical, instruments and insulation. $12,600, (CDN) Year: 2005/2006
36 Contracts: Stone & Webster / NOVA Chemicals Fabrication and shipping by rail of 35 Ethylene Furnace Convection boxes to Joffre, Alberta. $ 7,500, (CDN) Year: 1999
37 Contracts: Praxair Canada Inc. Fabrication and installation of CO2 module; fabrication and installation of piping and vessels; installation of equipment, electrical and instrumentation $500, (CDN) Year: 1997
38 8 Kel-Gor Limited Power Plants
39 8.0 POWER PROJECTS CLIENT PROJECT YEAR OPG - Lambton GS 950 MW coal-fired boiler to steam turbine electricity generating facility, St. Clair Township, Ontario. Thermal Construction and Maintenance Services Agreement provider 2012 to current St. Clair Energy 600 MW natural gas-fired combined cycle electricity generating facility, Corunna, Ontario. Fabrication and installation of power and process piping; installation of Balance Of Plant and Water Treatment equipment supplied by St Clair Energy Greenfield Energy 1005 MW natural gas-fired combined cycle electricity generating facility, Courtright, Ontario. Fabrication and installation of power and process piping; installation of 3 Siemens Westinghouse 501FD2 CTG and MW Toshiba STG and Water Treatment equipment supplied by Greenfield Energy Imperial Oil 85 MW natural gas-fired electricity generating facility, Sarnia, Ontario. Fabrication and installation of the Piping, HRSG units, ducting, stacks and installation of Owner supplied equipment Brighton Beach Power 541 MW natural gas-fired combined cycle electricity generating facility, Windsor, Ontario. Fabrication and installation of two Austrian Energy HRSG units, ducting, stacks and related equipment. 2004
40 Contracts: St Clair Energy Cogeneration Plant 600 MW natural gas-fired combined cycle electricity generating facility, Sarnia, Ontario. Fabrication and installation of power and process piping; installation of Balance Of Plant and Water Treatment equipment supplied by St Clair Energy. $34,600, (CDN) Year: 2008
41 Contracts: Greenfield Energy Cogeneration Plant 1005 MW natural gas-fired combined cycle electricity generating facility, Sarnia, Ontario. Fabrication and installation of power and process piping; installation of 3 Siemens Westinghouse 501FD2 CTG and MW Toshiba STG and Water Treatment equipment supplied by Greenfield Energy. $40,000,000 (CDN) Year: 2007
42 Contracts: Imperial Oil - Cogeneration Plant 85 MW natural gas-fired electricity generating facility, Sarnia, Ontario. Fabrication and installation of the Piping, HRSG units, ducting, stacks and installation of Owner supplied equipment. $10,000, (CDN) Year: 2004
43 Contracts: Brighton Beach Power - Cogeneration Plant 541 MW natural gas-fired combined cycle electricity generating facility, Windsor, Ontario. Fabrication and installation of two Austrian Energy HRSG units, ducting, stacks and related equipment. $50,000, (CDN) Year: 2004
44 Contracts: TransAlta Sarnia Regional Cogeneration Plant 506 MW Natural Gas Cogeneration, Sarnia, Ontario Fabrication and installation of three HRSG; fabrication and installation of ductwork and stacks; installation of equipment supplied by TransAlta. $19,800, (CDN) Year: 2002
45 9 Kel-Gor Limited Project Profiles
46 INEOS Styrolution Canada Turnaround for the Sarnia Styrene Plant. 42 day Turnaround with 400 trades. Removal and reinstallation of vessels and piping including the 325 ton TT-204 Crude Styrene Condenser (pictured above) and the 385T TT-201/224 Waste Heat Exchanger. Contract: $16,500, (CDN) Year: 2016
47 Contract: Air Products and Chemicals, Inc. Erection of 153 MMSCFD Hydrogen Reformer. Fabrication of pipe spools, modules and erection of Hydrogen Reformer at Fort Saskatchewan, Alberta. Fabrication of pipe spools and structural steel in Sarnia, ON and modular assembly in Sherwood Park, AB. $70,000, (CDN) Year: 2014/2015/2016
48 BioAmber Canada. Fabrication and Installation of Piping ASME Section B31.1 and B31.3 fabrication and installation of over 70,000 feet of piping for the Sarnia 30,000 MT Succinic Acid Production Facility. Contract: $30,000, (CDN) Year: 2014/2015
49 Contracts: Royal Dutch Shell Sarnia Manufacturing Site Shop Fabrication of new FCCU Disengager/Torso/ Cyclones & Air Grid, Cat O/H line, CO2 Boiler, Sour Water Stripper Tower, Fractionator, Girbitol Tower, Slurry Coke Filters and Piping, Feed Cooler Upgrade, Safeguarding, Piping and multiple small projects prior to and during the 2011 T/A Event including GRU maintenance of all towers, vessels and exchangers. $55,000, (CDN) Year: 2011
50 Contracts: Year: Cabot Canada Capital Projects Silo Bins, Ductwork, Piping and Mechanical; various projects ongoing $5,000, (CDN) Ongoing
51 Contracts: Year: Imperial Oil Sarnia Manufacturing Site Standing Agreement for Maintenance and Engineering Contracts; Restoration; ULSD; fabrication and erection of piping, modular process units, tanks, fired heaters, cracking furnaces, pressure vessels and heat recovery units. $100,000, (CDN) Ongoing
52 Contracts: Year: Praxair Canada Inc. Fabrication and installation of cold boxes for oxygen, nitrogen and xenon; fabrication and installation of cryogenic piping; installation of equipment supplied by Praxair. $16,250, (CDN) Ongoing
53 Contracts: Suncor Energy Oil Sands Integration, Sarnia, Ontario. Fabrication and installation of pipe rack and equipment modules; fabrication and installation of all piping; installation of equipment supplied by Suncor including new Reactor, Hydrocracker and Compressors. $69,000, (CDN) Year: 2007
54 Contracts: Suncor Energy Diesel Hydrotreater (ULSD), Sarnia, Ontario. Fabrication and installation of pipe rack and equipment modules; fabrication and installation of all piping; installation of equipment supplied by Suncor. $46,500, (CDN) Year: 2006
55 Contract: Air Products and Chemicals, Inc. 82 MMSCFD Hydrogen Plant, Sarnia, Ontario. Fabrication and installation of pipe rack and equipment modules; fabrication and installation of reformer, ducts and stack; fabrication and installation of all piping; installation of equipment supplied by APCI. $18,500, (CDN) Year: 2006
56 Contracts: Styrolution Sarnia Site 950 MM Styrene Monomer Plant, Sarnia, Ontario. Fabrication and installation of pipe rack and equipment modules; fabrication and installation ducts and stack; fabrication and installation of all piping; installation of equipment supplied by NOVA. $18,500, (CDN) Year: 1998
57 10 Kel-Gor Limited Contacts
58 10.0 Contact Information Company Name: Address: City: Province Postal Code: Country: Kel-Gor Limited P.O. Box 2253, 1411 Plank Road Sarnia Ontario N7T 7L7 Canada Telephone: (519) Facsimile: (519) Web page: Company Officers: Chris Thomas President Tom Parkes Chris Gleeson Vice President Controller
Turnaround And Major Capital Project Services
Turnaround And Major Capital Project Services ENERGY ENVIRONMENTAL Babcock & Wilcox (B&W) is a leading supplier of turnaround and capital project services for customers in a wide variety of industries,
More informationINDUSTRIAL FABRICATION & MODULARIZATION
INDUSTRIAL FABRICATION & MODULARIZATION AECON FABRICATION As one of North America s largest pipe and custom steel fabricators and module erectors, Aecon knows how to deliver. We fabricate for virtually
More informationTrust is critical to the success of any multi-trade contractor. At the Laframboise Group, we earn trust by guaranteeing satisfaction with every job.
Trust is critical to the success of any multi-trade contractor. At the Laframboise Group, we earn trust by guaranteeing satisfaction with every job. Founded in 1964, the Laframboise Group of Companies
More informationWELDING ENGINEERING FABRICATION
WELDING ENGINEERING FABRICATION Safety Our safety department is structured for optimal safety performance, communication and coverage. Safety is our top priority Our management team has over 280 years
More informationMEMBER REZAYAT GROUP OF COMPANIES
KHOBAR OFFICE : P.O. Box 328, Al Khobar 31952 Tel. No.+966-03-882-7068/7235/5700, Fax No.+966-03-882-5193 Saudi Arabian Fabricated Metals Industry Co. Ltd. JUBAIL OFFICE : P.O. 10018, Jubail Indt l City
More informationTrust is critical to the success of any multi-trade contractor. At the Laframboise Group, we earn trust by guaranteeing satisfaction with every job.
Trust is critical to the success of any multi-trade contractor. At the Laframboise Group, we earn trust by guaranteeing satisfaction with every job. Founded in 1964, the Laframboise Group is one of eastern
More informationCONSTRUCTION MANAGEMENT
CONSTRUCTION MANAGEMENT AND MANAGER that offers comprehensive management throughout the project, from concept to completion, yielding the greatest possible benefit to the owner. IPS will offer uncolored
More informationASME AWS AISC API AISI DOT PED SELO NAT'L. BOARD
ASME AWS AISC API AISI DOT PED SELO NAT'L. BOARD 650 North Emerson Cambridge, Minnesota 55008 Nationwide (763) 689-3360 Arrow...The Plate Fabrication and Engineering Experts. The following pages present
More informationYour single source for design engineering, specialized fabrication and related services
Your single source for design engineering, specialized fabrication and related services We build true partnerships Vestek is a next-generation company forged by leading fabricators. Together, we are your
More informationEDMONTON EXCHANGER GROUP OF COMPANIES - FIELD SERVICES Edmonton Exchanger was founded in 1975 and is over 1,000 employees strong.
Field Services EDMONTON EXCHANGER GROUP OF COMPANIES - FIELD SERVICES Edmonton Exchanger was founded in 1975 and is over 1,000 employees strong. We are a multi-divisional company and feature a wide range
More informationH.C. VIDAL LTEE SUPPLIER'S DATA MANUFACTURING AND QUALITY CONTROL 5700 PHILIPPE TURCOT MONTRÉAL (QUÉBEC) CANADA, 4HC 1V6
H.C. VIDAL LTEE SUPPLIER'S DATA MANUFACTURING AND QUALITY CONTROL 5700 PHILIPPE TURCOT CANADA, 4HC 1V6 MONTRÉAL - 2017 info@ TABLE OF CONTENTS General informations... 3 Our key personnel... 3 Manpower
More informationSUPPLIER QUALITY SCOPE AND FACILITY QUESTIONNAIRE. Bantrel Co. Project #:
Bantrel Co. Project #: COMPLETED BY: DATE: SUPPLIER NAME: D & B NUMBER: CONTENTS 1.0 GENERAL INFORMATION 2.0 PERSONNEL 3.0 QUALITY PROGRAM 4.0 SUPPLIER / CONTRACTOR INFORMATION 5.0 SCOPE OF FABRICATION
More informationWho We Are. Located near Port, Rail and Road transportation links, Maritime Welding Inc. can deliver world-class steel fabrication services worldwide.
Who We Are Maritime Welding Inc., established in 1969, is a fully equipped metal fabricating shop staffed by a well trained flexible and knowledgeable workforce. Our shop located in Northern New Brunswick
More informationWorld Class NQA-1 Fabrication
World Class NQA-1 Fabrication To Su p p ly Sup e r i o r Pr o d u c t s a n d Se r v i c e s a t a Competitive Pri c e wi t h Integrity Our Project List Includes: Agitators & Seismic Bumpers Bi-Cell Tanks
More informationTotal Solution Total Value
INCREASED CAPACITY You don t need to look any further Total Solution Total Value +DESIGN ENGINEERING +SUPERIOR COMPONENTS =MODULAR PROCESS SKIDS ALLEGHENY BRADFORD CORPORATION A l l e g h e n y We have
More informationSHARING YOUR VISION. BUILDING SUCCESS.
SHARING YOUR VISION. BUILDING SUCCESS. WE ARE MORE THAN JUST BUILDERS PCL Industrial Services is a diversified, full-service heavy industrial contractor and fabricator servicing a client base in the oil
More informationAECON POWERS THE INDUSTRY
POWER GENERATION AECON POWERS THE INDUSTRY For nearly a century, Aecon has worked on numerous power generation projects, from hydroelectric to nuclear plants to the latest in solar power. And over the
More informationRycroft Process Solutions 1 PROCESS SOLUTIONS
Rycroft Process Solutions 1 PROCESS SOLUTIONS RYCROFT HAVE BEEN MANUFACTURERS OF PROCESS EQUIPMENT FOR OVER 25 YEARS. ORIGINALLY SUPPLYING PROCESS PACKAGES TO THE OFFSHORE AND MARINE SECTORS. RYCROFT STEADILY
More informationSUPER STEEL... SUPER SERVICE...
SUPER STEEL... SUPER SERVICE... RANCO SUPER STEEL. SUPER SERVICE. Leaders in the super steel industry State-of-the-art welding and fabrication ISO certified quality Over 30 years of experience and success
More informationMetal Fabricators. Phone DAKA (3252) Fax Serving the Construction Industry and Manufacturers Since 1977
Metal Fabricators Serving the Construction Industry and Manufacturers Since 1977 Structural Steel, Joists & Deck Miscellaneous & Ornamental Metals, Stairways & Railings OEM Fabrication / Custom Metal Work
More informationCustom Fluid Handling Process Equipment. HCS Group Manufacturing, Division of Ontario Inc
Hawman Container Services ISO 9001:2008 Certified Custom Fluid Handling Process Equipment HCS Group Manufacturing, Division of 872556 Ontario Inc. HISTORY Hawman Container Services was founded in the late
More informationHRSGs, Waste Heat Boilers & Aftermarket Services
Hamon Deltak HRSGs, Waste Heat Boilers & Aftermarket Services In the Game in a BIG Way! Providing Heat Recovery Steam Generators (HRSGs) or Process Boilers of Any Size, Anywhere Hamon Deltak has BIG capabilities,
More informationEngineering Field Service ASME Repairs B31.3 piping Bundle Extraction Maintenance
ASME Repairs B31.3 piping Maintenance Chem Fabrication LLC 911 Brazosport Blvd. S. Clute, Texas 77531 Tel.: info@chemfab.net ChemFab.net SINCE 2003 CHEM FABRICATION Working hard to build a better tomorrow
More informationThe strongest thing we build is your trust.
COMPANY OVERVIEW The strongest thing we build is your trust. WWW.MITTERNIGHT.COM U tube exchanger 2-way horizontal CNC drill press An ironclad culture of quality In 1927 Joe Mitternight opened a boiler
More informationecon Bloomfield, CT Facility South Windsor, CT Facility
B econ Incorporated, founded in 1966 is a dynamic and innovative company that has been designing and manufacturing a wide variety of engineered control systems, test stands, automatic process equipment,
More informationStainless, Alloy, Exotics. ASME Code Welding. R, S, and U Stamps. Capital Projects. Turnarounds
Stainless, Alloy, Exotics ASME Code Welding R, S, and U Stamps Capital Projects Turnarounds We bring together the talent, skill, experience and resources to make your most challenging projects a success.
More informationCapability Statement
Capability Statement Contents 1. About Us 2. Company Overview 3. Company Information 4. Personnel 5. Facilities 6. Pressure Piping & Vessels 7. Structural Steel 8. Labour Hire 9. Quality Assurance 10.
More informationQUALIFICATIONS NEEDED TO DESIGN, CONSTRUCT AND MANUFACTURE NUCLEAR SYSTEMS AND EQUIPMENT. Cosmos M. Voutsinos, P.Eng.
QUALIFICATIONS NEEDED TO DESIGN, CONSTRUCT AND MANUFACTURE NUCLEAR SYSTEMS AND EQUIPMENT Cosmos M. Voutsinos, P.Eng. 1638 Scenic Heights South, Lethbridge, Alberta, Canada 403-331-2212,
More informationCSI HISTORY AND CAPABILITIES
PHONE: 704-644-5000 FAX: 704-588-3039 WEB: www.csiheat.com CSI HISTORY AND CAPABILITIES CONTENTS: History Key Personnel Facilities and Equipment Engineering and Technical Services Support Design and Contract
More informationCONSTRUCTION BOILERMAKER TRADE BOARD & INTERNATIONAL BROTHERHOOD OF BOILERMAKERS LOCAL 128 & BOILERMAKERS APPRENTICESHIP AND TRAINING TRUST FUND
CONSTRUCTION BOILERMAKER TRADE BOARD & INTERNATIONAL BROTHERHOOD OF BOILERMAKERS LOCAL 128 & BOILERMAKERS APPRENTICESHIP AND TRAINING TRUST FUND 1 Executive Summary The Construction Boilermaker Trade Board
More informationAnchorage Fabrication Facility
Anchorage Fabrication Facility Facility Overview The AES Anchorage Fabrication and Construction group excels at providing all ranges of fabrication and construction services with an emphasis on job safety,
More informationLEADERS IN CUSTOM EQUIPMENT MANUFACTURING
LEADERS IN CUSTOM EQUIPMENT MANUFACTURING D E L I V E R I N G O N A G L O B A L S C A L E Axton s Mission Statement For our customers - To provide products in accordance with our customer s technical,
More informationAFPM 2018 Operations & Process Technology Summit
GASOLINE PROCESSES Alkylation 1 What are the benefits of alumina treating in sulfuric acid alkylation and HF alkylation? Has this technology been proven commercially? 2 What metallurgy works well and does
More informationACCREDITATION OF MANUFACTURERS OF BOILERS & PRESURE VESSELS
ACCREDITATION OF MANUFACTURERS OF BOILERS & PRESURE VESSELS [Not applicable to ASME Sec. IV, Cast Iron and Aluminum Boilers, ASME Sec. VIII Div 1, UG-90 (c) (2) and Graphite Vessels, ASME Sec. VIII, Div.
More informationnalcofabtech.com A Nalco Champion Company
nalcofabtech.com A Nalco Champion Company 2 CONTENTS Goal Zero - Safety Culture...4 About Us...6 Capabilities...8 Services...24 Equipment and Facilities... 36 3 4 At Nalco FabTech, our programs ensure
More informationThompson Construction Group
Thompson Construction Group Solutions for Industrial Progress Whatever the industry, Thompson is here with the expertise needed for your construction project. Our specialists deliver the highest caliber
More informationPressure Piping Construction Requirements QMS written description verification CHECKLIST AB-518b
QMS written description verification CHECKLIST AB-518b Company Name: Company Address: Title of the written description of the management system or manual(s): Person responsible for the overall management
More informationDESIGN REGISTRATION GUIDELINES FOR NUCLEAR PRESSURE RETAINING SYSTEMS AND COMPONENTS
Boilers and Pressure Vessels Safety Division Technical Standards & Safety Authority 14th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada M8X 2X4 www.tssa.org DESIGN REGISTRATION GUIDELINES
More informationSO YOU RE THE NEW WELDING ENGINEER
SO YOU RE THE NEW WELDING ENGINEER The Importance of Pre and Post-Weld Operations Fabtech 2014 Mike Rice Sr. Corporate Welding Engineer The Importance of Pre and Post-Weld Operations Pre-Weld Operations
More informationRegardless of any alternative pricing provided, a quotation for the items specified herein shall be provided.
1/5 1.0 PURPOSE This specification describes the minimum requirements for design, material and construction requirements for Expansion tanks. Ensure the design and fabrication of equipment and associated
More informationHydrogen Recovery by Pressure Swing Adsorption
Hydrogen Recovery by Pressure Swing 2 Contents. 3 Introduction 4 The process 5 The PSA sequence 6 Scope of work 7 The advantages 8 Contact 3 Introduction. The experience. The use of the Pressure Swing
More informationM9C 1A3 VELO (PH) (FX)
PROFESSIONAL DEVELOPMENT COURSES ANRIC Enterprises Inc. 701 Evans Ave, Suite 202 Toronto, ON M9C 1A3 (PH) 416-253-9459 (FX) 416-252-2553 www.anric.com PROFESSIONAL DEVELOPMENT COURSES CONTENTS INTRODUCTORY
More informationRegardless of any alternative pricing provided, a quotation for the items specified herein shall be provided.
1/5 1.0 PURPOSE This specification describes the minimum requirements for design, material and construction requirements for air receivers. Ensure the design and fabrication of equipment and associated
More informationTurnkey Boiler Overhauls. Plant Retrofits and Modifications. Specialty and Code Welding. Long-Term Maintenance
Turnkey Boiler Overhauls Plant Retrofits and Modifications Specialty and Code Welding Long-Term Maintenance Turnkey Planned Outages With a national skilled labor force and an experienced and professional
More informationLOUISIANA FABRICATION FACILITIES AND SERVICES
LOUISIANA FABRICATION FACILITIES AND SERVICES General Contractor Services Production and Drilling Topsides Onshore Fabrication Piping, Structural, Coating Offshore Hookup, Platform Integration, Facility
More informationIntroduction Range of Products Services Provided Materials of Construction Designing i Codes Fabrication Facility Testing Facility
Est. 1985 Introduction Range of Products Services Provided Materials of Construction Designing i Codes Fabrication Facility Testing Facility Approvals/Registration Third Party Inspection Agencies Customer
More informationCommon Operating Problems
SYDNEY Pressure Vessels Field Manual Common Operating Problems and Practical Solutions Maurice Stewart Oran T. Lewis AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE
More informationDIRECTIVE Use of ASME Code Case 2596 in Alberta
Information Bulletin No. IB13-008 July 26, 2013 DIRECTIVE Use of ASME Code Case 2596 in Alberta Background ASME Code Case 2596 provides the requirements for design and construction of coldstretching austenitic
More informationwww.flexonics.com 1 800 854 2553 Senior Flexonics Pathway Division 2400 Longhorn Industrial Dr. New Braunfels, Texas 78130 Tel Int: 1 830 629 8080 Fax Int: 1 830 629 6899 E-mail: sales@pathway.flexonics.com
More informationB Contractor Licensing GUIDE FOR APPLICANTS
B Contractor Licensing GUIDE FOR APPLICANTS BRITISH COLUMBIA SAFETY AUTHORITY Prepared by: Ed Hurd P.Eng. Provincial Safety Manager, Boilers Date: June 26, 2013 MAN-4048-00 Page 1 of 14 Contents Introduction...
More informationTECNOLOG s.a. APIN Boilers Ofic. Ave Bolivia #1122/ Ave Las Calderas 330, Pta. Hermosa, Lima,
TECNOLOG s.a. APIN Boilers Ofic. Ave Bolivia #1122/ Ave Las Calderas 330, Pta. Hermosa, Lima, Lima 01, PERU edgargerber@tecnologperu.com www.tecnologperu.com Phone: +511-717-3725 - Plant +511-715-8866
More informationSERVICES TO SOLVE YOUR PROBLEMS AND MAKE YOUR LIFE EASIER
GLOBAL SERVICES SERVICES TO SOLVE YOUR PROBLEMS AND MAKE YOUR LIFE EASIER All over the world, customers in industrial and institutional markets alike turn to Armstrong International for intelligent, thermal
More informationLIBURDI-DIMETRICS ORBITAL WELD SYSTEMS AND SUPPORT FOR FIELD APPLICATIONS
LIBURDI-DIMETRICS ORBITAL WELD SYSTEMS AND SUPPORT FOR FIELD APPLICATIONS GMAW-FCAW Orbi-MIG II-K Head Field Applications West Closure, New Orleans The Orbi-MIG II- K Head weld system was used to weld
More informationFluid Catalytic Cracking (FCC) delivering Predictable Results
Fluid Catalytic Cracking (FCC) delivering Predictable Results Wood Group Mustang brings vast process plants experience to your project. Our process engineers and project managers average more than 20 years
More information50 Years of PSA Technology for H2 Purification
50 Years of PSA Technology for H 2 Purification 1 50 Years of PSA Technology for H2 Purification The first industrial application of Pressure Swing Adsorption (PSA) went on stream in 1966 at a Union Carbide
More informationREFERENCE SYLLABUS. for WELDING EXAMINER & WELDING EXAMINER IN TRAINING CERTIFICATES OF COMPETENCY EXAMINATIONS
WELDING EXAMINER & CERTIFICATES OF COMPETENCY S AB-94 Edition 1, Revision 6, 2016-05-01 This syllabus is being phased out and will be discontinued on April 30, 2018. GENERAL INFORMATION INTRODUCTION: This
More informationWASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS
WASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS BORSIG The Company BORSIG Process Heat Exchanger GmbH, a member of the BORSIG Group, is the international leading manufacturer of
More informationHeat Recovery Systems and Heat Exchangers in LNG Applications. Landon Tessmer LNG Technical Workshop 2014 Vancouver
Heat Recovery Systems and Heat Exchangers in LNG Applications Landon Tessmer LNG Technical Workshop 2014 Vancouver Presentation Overview LNG plant arrangement with heat recovery (OSMR Process by LNG Limited)
More informationPipeline Oil & Gas Equipment, Inc.
Pipeline Oil & Gas Equipment, Inc. Web Page: www.pipe-equip.com - E-Mail: info@pipe-equip.com Tel: (936) 321 6963 - Fax: (936) 273 5150 WHERE Quality IS OUR, HIGHEST PRIORITY At Pipeline Oil & Gas Equipment,
More informationPROCESS GAS WASTE HEAT BOILERS WITH THIN FLEXIBLE TUBESHEET DESIGN
PROCESS GAS WASTE HEAT BOILERS WITH THIN FLEXIBLE TUBESHEET DESIGN BORSIG The Company BORSIG Process Heat Exchanger GmbH, a member of the BORSIG Group, is the international leading manufacturer of pressure
More informationABOUT MAVERICK. A Word From Our CEO
Company Overview 2 t ABOUT MAVERICK A Word From Our CEO At Maverick, we are proud to be in the business of building to move the world s energy. Since opening our doors in 1978, our credo has been to work
More informationFOYNES ENGINEERING. Bringing Quality, Expertise and Experience in the delivery of Mechanical Engineering Projects
FOYNES ENGINEERING Bringing Quality, Expertise and Experience in the delivery of Mechanical Engineering Projects FOYNES ENGINEERING Ennis Limerick Established in 1993 Foynes Engineering has developed a
More informationApplication for an Ontario Certificate of Authorization For Ontario based businesses CSA N285.0 Nuclear Components
345 Carlingview Drive PRINT Click to clear On completion, send this form to the attention of Boilers and Pressure Vessels Safety at the top left TSSA address. Company: (Legal Company Name and Corporation
More informationFounded in 1996, Summit Industrial Construction, LLC is a merit shop, heavy industrial contractor. Summit
ABOUT US Founded in 1996, Summit Industrial Construction, LLC is a merit shop, heavy industrial contractor. Summit is licensed to perform industrial construction nationwide and holds R, S and U stamps
More informationDAWCO S SERVICE OVERVIEW December 2015
DAWCO S SERVICE OVERVIEW December 2015 Introduction The DCM Group, a privately-owned enterprise, brings together a family of trade-specific companies under one common management and ownership group. The
More informationJOSEPH OAT CORPORATION. We Make Metal Work FABRICATION, DESIGN, AND CONSULTING SERVICES FOR THE NUCLEAR INDUSTRY.
JOSEPH OAT CORPORATION We Make Metal Work FABRICATION, DESIGN, AND CONSULTING SERVICES FOR THE NUCLEAR INDUSTRY. JOSEPH OAT CORPORATION Joseph Oat Corporation, a family owned and operated business for
More informationREPRINTED FROM MAGAZINE JANUARY/FEBRUARY 2017
REPRINTED FROM MAGAZINE JANUARY/FEBRUARY 2017 G. MANENTI, V. PESCUMA AND S. SARTI, ALFA LAVAL OLMI SPA, ITALY, PROVIDE AN OVERVIEW OF THE DELIVERY SCHEDULE FOR A KEY PIECE OF HEAT TRANSFER EQUIPMENT, PROCESS
More informationBORSIG Process Heat Exchanger GmbH. Egellsstr. 21 Phone: +49 (0) 30 / Berlin/Germany Fax: +49 (0) 30 /
BORSIG Process Heat Exchanger GmbH www.borsig.de/pro E-mail: info@pro.borsig.de Egellsstr. 21 Phone: +49 (0) 30 / 4301-01 13507 Berlin/Germany Fax: +49 (0) 30 / 4301-2447 BORSIG Process Heat Exchanger
More informationOur Vision. Our Divisions. Our Mission Statement. Our Team
Our Vision Our vision is to be the preferred service provider for customers demanding the highest standards of quality and service. With our experienced team and the most advanced technology in the industry,
More informationTotal Quality Management. Quick and Accurate Response to Inquiries. As-Promised Deliveries. Fair and Competitive Prices
FORGED SHAPES 1 2 MISSION STATEMENT The Anderson Shumaker team is dedicated to earning your loyalty and gaining your trust through: Total Quality Management Quick and Accurate Response to Inquiries As-Promised
More informationTaravosh Jam Design & Engineering Co.
Taravosh Jam Design & Engineering Co. Taravosh Jam co. as an Iranian EPC contractor supplies following refinery equipment and facilities based on the know-how and to international standards. 1- The Main
More informationApplication for an Ontario Certificate of Authorization For businesses based Outside Ontario CSA N285.0 Nuclear Components
345 Carlingview Drive PRINT Click to clear On completion, send this form to the attention of Boilers and Pressure Vessels Safety at the top left TSSA address. Company: (Legal Company Name and Corporation
More informationPCE CONSTRUCTORS, INC. REPRESENTATIVE PROJECTS
POWER PROJECTS Steam Mississippi Installation of a site erected waste gas fired 160,000 LB/HR steam boiler (Hangzhou Boiler Group), foundations/concrete, drilled piers (730 EA - 24 IN/30 IN DIA), structural
More informationwww.dixiesouthern.com About Dixie Southern ASME Code Fabricator, Founded in 1976 Headquartered in Bradenton, FL Manufacturing Facility in Duette, FL 65,000 sq ft of Manufacturing Under-Roof Two Gulf Shipping
More informationACCREDITATION OF MANUFACTURERS AND INSTALLERS OF PRESSURE PIPING PARTS AND SYSTEMS
ACCREDITATION OF MANUFACTURERS AND INSTALLERS OF PRESSURE PIPING PARTS AND SYSTEMS TSSA GUIDE FOR SURVEY TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division
More informationValves for the Process Industries
Coking Valve NEXTECH Valve Critical Service Solutions Severe-Service Zero-Leakage Metal-Seated ValvTechnologies provides field proven solutions for severe service applications. Critical Service Valve Applications
More informationPCE CONSTRUCTORS, INC. REPRESENTATIVE PROJECTS
REFINERY PROJECTS Sulphur Recovery Units Montana Scope included: mechanical process equipment installation, piping fabrication/installation, and electrical/instrumentation work for two new Sulphur Units.
More informationCondenser Coils. Applications: Coil construction is available for Condenser, Desuperheater, and Reheat applications.
Condenser Coils Coil construction is available for Condenser, Desuperheater, and Reheat applications. Applications: Condenser - This coil takes the superheated vapor from the compressor and cools that
More informationCommitment: Technical expertise. Integrity. Value.
Commitment: Technical expertise. Integrity. Value. Beetle Plastics has, for five decades, been fully committed to the delivery of FRP products and services which add value to your project. Every element
More informationTechnical Committee on Highway Tanks and TC Portable Tanks for the Transportation of Dangerous Goods ix
Canadian Standards Association Highway tanks and TC portable tanks for the transportation of dangerous goods Contents Technical Committee on Highway Tanks and TC Portable Tanks for the Transportation of
More informationAMBICO Limited 7\2018 Section and OVERSIZED METAL DOORS AND FRAMES Page 1
Page 1 This section includes Oversize Steel Doors and Frames and relies on the Canadian Steel Door Manufacturers Association (CSDMA.org) industry standard, as well as on the Hollow Metal Manufacturers
More informationBeetlePlastics. Engineered and delivered right, on time. Fiberglass Reinforced Composites Piping Tanks Equipment Engineering Services
BeetlePlastics Engineered and delivered right, on time. Fiberglass Reinforced Composites Piping Tanks Equipment Engineering Services Cooling tower piping: Beetle Plastics fiberglass reinforced piping for
More informationASME Stamp Pressure Vessels And Heat Exchangers for Oil & Gas, Refinery And Petrochemical Industry
U AUTHORIZED ASME Stamp Pressure Vessels And Heat Exchangers for Oil & Gas, Refinery And Petrochemical Industry www.crystalindustrial.in SHELL & TUBE HEAT EXCHANGER OVERVIEW For crystal, Shell and Tube
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationFlares MULTIPOINT TOTALLY ENCLOSED GROUND FLARE STEAM ASSIST MULTIPOINT INTERNAL STEAM
Flares Industry Leader / Compliance Driven / Certification Assured MULTIPOINT TOTALLY ENCLOSED GROUND FLARE INTERNAL STEAM MULTIPOINT STEAM ASSIST Internal Steam Flare Cast 310SS internal tube segments
More informationHAWK International Fabrication Workshop(HIFW)Facility 2010
HAWK International Finance & Construction Co. Ltd. HAWK International Fabrication Workshop(HIFW)Facility 2010 PROVIDING FABRICATING SOLUTIONS TO THE OIL & GAS INDUSTRY CONTENTS o Overview o Business Objectives
More informationWELDING TECHNOLOGY WELDING TECHNOLOGY WELDING TECHNOLOGY PROGRAM REQUIREMENTS WELDING TECHNOLOGY AAS DEGREE CAREER AND PROGRAM DESCRIPTION
WELDING TECHNOLOGY Rock Creek Campus Building 2, Room 11 - Shop Building 2, Room 20 - Office 971-722-7600 or 971-722-71 Swan Island Welding Center 5555 N Channel Ave 50-27-172 pcc.edu/programs/welding/
More informationSYNTHESIS GAS COOLER DOWNSTREAM OF PARTIAL OXIDATION OF OIL OR NATURAL GAS
SYNTHESIS GAS COOLER DOWNSTREAM OF PARTIAL OXIDATION OF OIL OR NATURAL GAS BORSIG 1 About BORSIG Process Heat Exchanger GmbH BORSIG Process Heat Exchanger GmbH, a member of the BORSIG Group, is the international
More informationSTEEL IMAGE CONTACT METALLOGRAPHY BUT WITHOUT. Shane Turcott, P.Eng., M.A.Sc Principal Metallurgist. (289) x301
STEEL IMAGE CONTACT Shane Turcott, P.Eng., M.A.Sc Principal Metallurgist shane@steelimage.ca (289) 895-8363 x301 Steel Image Inc. 7 Innovation Drive., Suite 155 Dundas, ON, L9H 7H9 METALLOGRAPHY BUT WITHOUT
More informationCUSTOM FABRICATION GREAT LAKES SHIPYARD
CUSTOM FABRICATION 2014 GREAT LAKES SHIPYARD BUILDING OUR REPUTATION FOR MORE THAN A CENTURY NEW BUILD BY NEW BUILD. 1 OVERVIEW...3 FACILITIES & EQUIPMENT...5 INDUSTRIES...7 CAPABILITIES...8 PRODUCTS &
More informationWASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS
BORSIG PROCESS HEAT EXCHANGER GMBH WASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS www.borsig.de/pro 1 About BORSIG Process Heat Exchanger GmbH BORSIG Process Heat Exchanger GmbH,
More informationRJ Engineering Systems, Inc. Company Profile
RJ Engineering Systems, Inc. Company Profile about us Specialists in system design, engineering, procurement & manufacturing RJ Engineering Systems, Inc (RJES) is a manufacturer of custom engineered equipment
More informationSimoneau Presentation
Simoneau Presentation SIMONEAU S HISTORY 1984: Establishment of a maintenance/repair company. 1992: Boilermaking Manufacturer s Licence. 1994: Construction of a 44,000 s.f. plant. 1999: Simoneau designs
More informationFABRICATION OF HEAVY WALL Cr-Mo / Cr-Mo-V REACTORS CHALLENGES AND TECHNOLOGY UPGRADATION AT LARSEN & TOUBRO LIMITED INDIA
FABRICATION OF HEAVY WALL Cr-Mo / Cr-Mo-V REACTORS CHALLENGES AND TECHNOLOGY UPGRADATION AT LARSEN & TOUBRO LIMITED INDIA Pallav Chattopadhyay, B K Rai & Y S Trivedi Larsen & Toubro Limited India Abstract:
More informationLaser Cladding Services
Laser Cladding Services Alabama Laser provides laser cladding services, using lasers to deposit a layer of material onto a substrate by way of powder or wire. This process is emerging as a strategic technique
More informationQuality Control Manual Submission Information
330 1855 Victoria Avenue Regina, SK S4P 3T2 PH: (306)798-7111 Toll Free: (866)530-8599 FAX: (306)787-9273 Toll Free: (866)760-9255 Website: www.tsask.ca Table of Contents Quality Control Manual Submission
More informationAPPARATUS CONSTRUCTION
APPARATUS CONSTRUCTION SCHRADER implements customized apparatus at the highest technical standard and in compliance with the most important standards and regulations in force worldwide. Schrader apparatus
More informationIntegrity. Performance. Results. Company. Prospectus
Company Prospectus SAFE, COST-EFFECTIVE, TIMELY SOLUTIONS Evergreen Energy is an established pipeline and oilfield construction company known for developing safe, cost-effective, timely solutions. We specialize
More informationIndustrial Electrical Water Heaters Manufactured In Accordance With International Codes And Standards ( AMSE, EN, AD2000, CODAP, PD, API etc. ).
INDUSTRIAL INDUSTRIAL SERIES Industrial Electrical Water Heaters Manufactured In Accordance With International Codes And Standards ( AMSE, EN, AD2000, CODAP, PD, API etc. ). Ideal for all types of large
More informationQuality Control Manual Submission Information
Table of Contents Quality Control Manual Submission Information 1.0 Legislative Requirement 1.1 Exemption to Legislative Requirement 2.0 Required content of Quality Control Manual 2.1 Title Page 2.2 Scope/
More information