Crushed Hooked Backwards

Transcription

1 1

2 2

3 Crushed Hooked Backwards If you work with wood with thorn, your wheels will be punctured, and if there is a lot of wood, you can break low parts of tractor. If you work backward this problem is avoided. 3

4 Crushing in almond tree`s trim 4

5 Crushing in almond tree`s trim working backwards don t break low part of tractor and save the stones. 5

6 Pruning residues 6

7 Pruning residues. This is the result after passing with the machine. Trim residues are destroyed. We don t need to take off or burn the branches. So we can bring dung to ground and preserve nature because we don t make fire neither smoke. 7

8 In this picture, we can see the result after the machine works in a cabbage field, and cabbage plants are completely destroyed. This is an important contribution of dung to ground. Plant residues have a lot of chemical elements very important for the ground. 8

9 This is perfect crushing (trunks and leafs) in a cabbage field. So we obtain a good contribution of dung to ground, we bring chemical elements as iron, cinch, nitrogen, phosphorus, potassium, boron, etc. those elements will be assimilate during the irrigation process. 9

10 machine working with trim residues of orange tree 10

11 machine working with trim residues of orange tree 11

12 machine working with trim residues of orange tree 12

13 machine working with trim residues of orange tree In this picture we can see the machine working with trim residues of orange tree (very hard). Works backward because this tree have thorns and so prevent punctures. You can see the big trunk, in a few moments it s completely destroyed. 13

14 Double leveler leaf 14

15 It s used for level, clean, country roads, sport pools. We manufacture from 1.5 m. to 3 m. and from 40 hp. to 300 hp. With hydraulic cylinder it can make stilting. 15

16 Double leveler leaf to clear out back and forward Specially designed for ground, pebble grave, etc. It can be fixed or horizontally gyrator specially for bulging and stilting. We manufacture it from 1.5 m. to 3 m. 16

17 Rear leveling to clear up for all kinds of materials such as gravel truck unloaded, land, graded aggregates, etc.. To repair roads, streets and buildings. With or without laser, this model is with leveling laser for both manual or automatic pending on the level laser used by issuer. Is faster than the motor lever it can clear up forwards and backwards without disengaging and is very easy to handle. Placing a cylinder to the third point, regulating the entry and a cylinder in one of the arms can lift inclinations. 17

18 LASER HANGING LEVELER It will be used even with low power tractors. Width closed: 1.80 m. width opened: 3.30 m. Min. Power : 50 hp.. 18

19 For laser leveling to fields and plants fields, when is impossible to work with trailer machine and a big tractor. Can works in greenhouses. Both sides open and close through hydraulic system. Perfect leveling with laser equipment. 19

20 Hanging leveler from 2.60 m. close to 4 m. open Min. power 100 hp. to 200 hp. Weight kgs. Work speed: 7 km/h without oscillations 20

21 Weight: kgs. Min power 80 hp. Auto directional wheels4 Sides open and close through hydraulic system. Leveler can works with or without laser. Machine can work with any kind of laser available. 21

22 Hanging leveler fixed through three point to the tractor. We can see the machine working in sand s field for laser leveling. It s preparing the field for rice s planting. 22

23 Characteristics: Close width: 2.5 m.open width: 4.00 m. Weight: kg. Min. power: from 90 to 200 c.v. This leveler improves hydraulic power of the tractor, to be guided for the laser for field s leveling, to zero level to 1 or 2 grade, it depends on the transmitter equipment, because his work is completely automate, so the tractor driver must only think in driving the vehicle. When the machine is empty, and can t volley automatically leveler is finished. 23

24 Two details of our machines, turn of wheels and vision You can see the machine hanging to drive. 24

25 25