Hydraulic trunk shaker VC

Transcription

1 Hydraulic trunk shaker VC - Easy to handle, because of its small weight - It can be used for small and big diameter trees. - Big clamp with a maximum diameter 220 mm - No damage of surface around the trunk. - A easy and economically construction. - Tractor hydraulic powered with minimum 20-40ltr./min. - Very simply development. - Minimum trunk height up to 0,6 m - Very easy ergonomically movement. - For all kind of fruits. - For small rows up to 4 m and more. Technical specification trunk shaker VC Row width: Trunk height minimum: Distance of trees: Treeds diameter: Tractor oil: Harvesting flow: 3500 mm 900 mm 800 mm 220K Kg min. 4 m mm 0,6 m 2,2-2,5 m ca. 4,5 m l/min 95% of fruits 2

2 Mechanical trunk shaker VHM Technology from today for tomorrow - Easy to use. - The trees shaking operation is done with a big clam so there is no damage the trunks surface. - No need addition of belt. - The construction of the frame is plastic coated with a big stability. Technical specification trunk shaker VHM Rows width: PTO revolution: Shake achievement: Tractor hydraulics: Tractor power: User: 20 mm 3690 mm 740 mm 450 kg min. 4 m mm 540 /min RPM trees/h 2 DW 2 cylinders hydraulics up to 30 HP and more Cider fruits (apples, pears, cherries., ecc,.)

3 Hydraulic trunk shaker VHD/B/E - VHD: Economical shaker, 2-hydraulic valves - VHB: Without valves - Due to its low amplitude star like vibration movement, the shaker head has respect for trees and their roots. - Possible to shake young trees. - Very easy to handle. - Best shaking results. - For trees from m to 20 m height. - Oil circulation at of articulated joint is separated. - Masses are driven by 2 hydraulic engines which give a great dynamism at the start up. - Shaker head independent from the frame, suspended by 4 chains. Technical specification trunk shaker VHD/B/E Shaker capacity: Oil tank: Power tractor requested: PTORevolution: 3000 mm 700 mm 50 mm 660 Kg mm 75 trees/h 30 litres from 50 HP and over 540 /min RPM

4 Hydraulic trunk shaker V 0 for intensive cultivations Trunk shaker with electrical function - Dynamical start, hydraulic transmition. - Electrical start for opening and closing as well and vibrations of clamp is done by joystick (electrical control) which is assembled in the driver s cab. - The shaker head is independent from the frame suspended from 4 chains. The shaker can be pushed sideways,25 m. Maximum on the side 2,5 m of the middle of the shaker - Powered hydraulic from the tractor with minimum 45 l/h - Due to its very low amplitude vibration movement, the shaker head acts with consideration for trees and their roots. Because of this it s possible to shake young trees. Technical specification trunk shaker V0 PTO revolution: Shake achievement: Powered hydraulic: Power of tractor: 20 mm 2490 mm 950 mm 560 Kg mm 540 /min RPM up to 300 trees/h separated tank 60 litres up to 50 HP and more

5 Hydraulic trunk shaker VHP for intensive harvesting - Mechanically welded frame. - Shaker head independent from the frame, suspended from 2 chains. - The 2 support points of the shaker head are mounted on a parallelogram to reach a width of 2,50 m, swerve maximum. - 2 hydraulics engines, dynamic start. - The tightening of the tree s trunk, can be done from 0,30 m up to,30 m high. - Is possible to shake 2 trees at the same time, also with different diameters: from 50 mm to 250 mm or from 250 mm to 400 mm (the adjustment is done by the operator, it depends on his orchard specifications). - Due to its very low amplitude vibration movement, the shaker head acts wit consideration for trees and their roots.. - Possible to shake young trees. - Hydraulic cog wheel pump, direct power take-off. - Opening and closing as well as vibration and direction of the clamp are done by joystick (electrical control) which is assembled in the driver s cab. - All movements are hydraulic. - Star like vibration with a single belt drive. - Masses are driven by 2 hydraulics engines which gives a full dynamism for the starting up. Technical specification trunk shaker VHP Hydraulic oil tank: Shaker capacity: Power tractor requested: Worker requested: 2800 mm 270 mm 50 mm 82 Kg (without back balance) - 90 kg (with back balance) mm mm 40 l 400 trees/h from 60 HP and over

6 Hydraulic telescopic shaker VHT - Mechanically welded frame with a telescopic arm. - Height of the telescopic arm:,50 m - The shaker head is independent from the frame suspended by 4 chains. - Masses are driven by 2 hydraulic engines, which gives a full dynamism for the starting up. - The telescopic trunk shaker drives straight down the tree row, shaking each tree as it goes, this provides more efficiency and avoids damaging of your field. - The fixing of the trees can be done from 0,50 m to 3,50 m of height, The trunk diameter can be,60 (500 mm of diameter). - The distance between the wheel and the trunk is minimum m and can reach up to 2,50 m. - A ll movements are hydraulic and adjustable - A very strong shake movement Technical specification telescopic shaker VHT Telescopic arm height: Position on the road: Shake achievement: Tractor power: 3700 mm 200 mm 400 mm (Height in standard position) 280 kg 500 mm 2200 mm 3400 mm trees/h up to 65 HP and over