NOTICE OF DISPOSITION DOCKET
|
|
- Gregory Patterson
- 6 years ago
- Views:
Transcription
1 DISPOSITION BULLETIN 1318 May 4, 2012 NOTICE OF DISPOSITION DOCKET This notice reflects proposed amendments considered by the Commodity Classification Standards Board (CCSB) at the public meeting on May 1, 2012, and the action of the CCSB on each proposal. Dispositions resulting in amendments to the National Motor Freight Classification (NMFC) will be published in a supplement to the NMFC, unless reconsideration is granted or arbitration is requested in accordance with the CCSB s rules. The supplement is scheduled to be issued on June 21, 2012, with an effective date of July 21, 2012, except as otherwise noted. The CCSB may, in its discretion and for good cause shown, reconsider any docketed proposal on which disposition has been made. Requests for reconsideration must be made by mail, or fax and must be received in my office no later than 5:00 pm Eastern Time, May 31, If the proponent of a proposal or any party of record to a proposal disagrees with the disposition of that proposal, they may request neutral arbitration. Requests for arbitration must be made by mail, or fax and must be received in my office no later than 5:00 pm Eastern Time, May 31, Information on the CCSB, its procedures for amending the NMFC and its rules governing arbitration including a list of available neutral arbitrators may be obtained online at Go to CCSB on the navigation bar. If you do not have Internet access, or if you need assistance, please contact me at or ringer@nmfta.org. Please reference the docket and subject numbers on all correspondence. COMMODITY CLASSIFICATION STANDARDS BOARD Joel L. Ringer Chairman 1001 North Fairfax Street, Suite 600 Alexandria, VA ph: fax: web: ccsb@nmfta.org
2 SUBJECT 1 DOCKET APPROVED AS DOCKETED BOILERS, FURNACES, STOVES AND RELATED ARTICLES GROUP: subject to item Heaters, water, tank type, see Notes, items and 26522: Sub 1 In boxes or Packages 208, 1016, 1277, 2055 or 2056, other than secured Sub 2 on lift truck skids or pallets In boxes or Packages 208, 1016, 1277, 2055 or 2056, secured on lift truck skids or pallets; or in crates NOTE Does not apply on solar collectors, solar water heaters, fireplace gratetype heaters or swimming pool heaters. See item for applicable provisions for solar collectors or solar water heaters, item for fireplace grate-type heaters, and item for swimming pool heaters (NEW) NOTE Tank-type water heaters tendered in boxes or crates must be supported or suspended in the box or crate and be protected so that there will be no shifting and not less than 1 inch clearance between the article and the inside wall of the box or crate Heaters, water, tankless, see Note, item 26521, in boxes (NEW) Package 1208 Cancel; no further application. Item is amended to apply on tank-type water heaters with subprovisions based on packaging. Tank-type water heaters tendered in boxes or one of the listed numbered packages other than secured on lift truck skids or pallets are assigned class 125, while tank-type water heaters tendered in boxes or one of the listed numbered packages secured on lift truck skids or pallets, or in crates, are assigned class 100. Note, item is amended to clarify the applicable provisions for swimming pool heaters. Package 1208, which was applicable to tanktype water heaters, is canceled with provisions incorporated into new Note, item Concurrently, new item is established for tankless water heaters at a class Staff Contact: William F. Mascaro Telephone (703) mascaro@nmfta.org Page 2
3 SUBJECT 2 DOCKET APPROVED AS DOCKETED ELECTRICAL EQUIPMENT GROUP: subject to item NOTE No Change Switch Boxes or Electrical Enclosures, NOI, with or without covers, with or without cable terminals or fuse blocks or other fittings, but without fuses; Conduit Outlet Boxes or Junction Boxes or Cabinets, with or without fittings, see Note, item 62682; or Outlet Box Covers, other than outlet box plates; see Note, item 63162, in boxes, see Note, item 63161, subject to Items 170 and 171 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 1 but less than Sub 3 2 but less than Sub 4 4 but less than Sub 5 6 but less than Sub 6 8 but less than Sub 7 10 but less than Sub 8 12 but less than Sub 9 15 but less than Sub but less than Sub or greater NOTE No Change NOTE No Change Switch Boxes or Electrical Enclosures, NOI, with or without covers, with or without cable terminals or fuse blocks or other fittings, but without fuses; Conduit Outlet Boxes or Junction Boxes or Cabinets, with or without fittings, see Note, item 62682; or Outlet Box Covers, other than outlet box plates; steel, etc... Cancel; see item NOTE Cancel; no further application NOTE Cancel; no further application. Item is canceled with reference to item Concurrently, item is amended to remove the restriction other than steel. Notes, items and are canceled as having no further application. Staff Contact: William F. Mascaro Telephone (703) mascaro@nmfta.org Allison L. Austin Telephone (703) austin@nmfta.org Page 3
4 SUBJECT 3 DOCKET APPROVED AS DOCKETED ELECTRICAL EQUIPMENT GROUP: subject to item NOTE No Change Controllers or Controller Parts, NOI, other than plastic, see Notes, items and 61482, in boxes, crates or Packages 2345 or No Change NOTE No Change. Package 2535 (NEW) (1) ARTICLES: Electrical controllers may be shipped palletized with vertical corner posts and honeycomb pads positioned and maintained with stretch wrap plastic film. (2) EXTERIOR PACKAGING: Article must be secured to a two-way entry wood pallet, meeting all requirements set forth in Item 265, with a minimum of three carriage bolts. (3) INTERIOR PACKAGING: (a) A minimum of three honeycomb pads having a thickness of not less than 8 inches must be secured to article. (i) One pad must be placed on top edge of the front of article, and another must be placed on top edge of the rear. (ii) Additional pad(s) must be placed on front or rear of article to protect handles and as space permits. (b) Full-height L-shaped fiberboard corner posts must be positioned at each vertical corner of article. Corner posts must extend 3 inches in each direction. (4) PLASTIC FILM REQUIREMENTS: (a) Article must be wrapped in plastic film prior to application of pads and corner posts. (b) Entire article must then be wrapped in another layer of plastic film to secure pads and corner posts in place. (5) MARKINGS: Strap the Unit Top and Bottom to Trailer Wall, Do Not Nail Pallet to Trailer Floor, Top Heavy and other precautionary markings, as applicable, must be on at least two sides of the packaged article. (See Item 682.) New Package 2535 is approved for electrical controllers, per item Staff Contact: Erin N. Topper Telephone (703) topper@nmfta.org SUBJECT 4 DOCKET APPROVED AS DOCKETED CONDUITS, OTHER THAN EARTHEN, GROUP: subject to item NOTE No Change Pipe Connections or Pipe Joints, brass, bronze or copper, not plated, etc... Cancel; see NOTE Cancel; no further application. Page 4
5 SUBJECT 4 DOCKET APPROVED AS DOCKETED Concluded CONDUITS, OTHER THAN EARTHEN, GROUP: subject to item Pipe Fittings, NOI: subject to item Copper, brass or bronze, not plated, etc... Cancel; see NOTE No Change NOTE Cancel; no further application Pipe or Tubing, brass or copper, solder coated, straight or bent shapes, with or without couplings, ferrules or nipples, etc... Cancel; see Pipe or Tubing, brass, bronze or copper combined with iron or steel pipe or tubing, insulated and iron jacketed, with or without outside insulation or iron collars, etc... Cancel; see Pipe or Tubing, brass, bronze or copper, insulated and covered with metal foil or sheet, etc... Cancel; see Pipe or Tubing, brass, bronze or copper, insulated and iron jacketed, with or without outside insulation or iron collars, etc... Cancel; see NOTE Cancel; no further application Pipe or Tubing, brass, bronze or copper, covered or lined with iron or steel, etc... Cancel; see Pipe or Tubing, brass, bronze or copper, NOI, etc... Cancel; see (NEW) Pipe, Tubing, or Pipe or Tubing Fittings, brass, bronze or copper, combined or not combined with other materials, NOI, in packages, see Note, item 52186: Sub 1 Greatest dimension exceeding 192 inches Sub 2 Greatest dimension exceeding 96 inches but not exceeding 192 inches Sub 3 Greatest dimension not exceeding 96 inches NOTE Greatest dimension refers to the longest straight-line dimension of the (NEW) handling unit as tendered for shipment Tubing, flat, heating or cooling radiator core, copper, brass or bronze, solder coated, in straight lengths, etc... Cancel; see Items 51380, 51430, 51840, 51850, 51860, 51870, 51880, and are canceled with reference to new for brass, bronze or copper pipe, tubing, or pipe or tubing fittings. The new item assigns classes based on greatest dimension. New Note, item is added to define the term greatest dimension. Notes, items 51382, and are canceled as having no further application. Staff Contact: Erin N. Topper Telephone (703) topper@nmfta.org Page 5
6 SUBJECT 5 DOCKET APPROVED AS DOCKETED MACHINERY GROUP: subject to item Pumps, fuel, or Fuel Pump Assemblies, including Fuel Senders, internal combustion engine, in boxes or Packages 1241 or 1273, subject to Item 170 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 6 but less than Sub 3 12 or greater Item is amended to provide density-based classes, with class 200 assigned to densities of less than 6 pcf, class 110 assigned to densities of 6 but less than 12 pcf, and class 70 assigned to densities of 12 pcf or greater. The description of item is also amended to add reference to Fuel Senders. Staff Contact: Donald A. Newell Telephone (703) newell@nmfta.org SUBJECT 6 DOCKET APPROVED AS DOCKETED VEHICLES, OTHER THAN SELF-PROPELLED: subject to item Freight Carts, Trucks, Trailers or Wagons, horse drawn or trailer, NOI, wheels on or off: Sub 1 In boxes or crates, subject to Item 170 and having a density in pounds per cubic foot of: Sub 2 Less than Sub 3 6 but less than Sub 4 12 or greater Sub 5 Other than in boxes or crates, subject to Item 170 and having a density in pounds per cubic foot of: Sub 6 Less than Sub 7 6 but less than Sub 8 12 or greater NOTE Cancel; no further application. The provisions of item are amended to provide classes based on packaging and density. Note, item is canceled with no further application. Staff Contact: Daniel E. Horning Telephone (703) horning@nmfta.org Page 6
7 SUBJECT 7 DOCKET APPROVED AS DOCKETED TOOLS, OR PARTS NAMED: subject to item Graspers or Grabbers, reach extending (Reach Extenders or Reachers), NOI, see Note, item , in boxes or crates NOTE Applies on hand tools, other than power, used to extend one s reach. (NEW) Does not apply on dental, medical or surgical instruments. Item is amended to name Graspers or Grabbers, reach extending (Reach Extenders or Reachers), NOI, at a class 200. New Note, item is established for clarification. Staff Contact: George M. Beck Telephone (703) beck@nmfta.org Nathan D. Ripke Telephone (703) ripke@nmfta.org SUBJECT 8 DOCKET APPROVED AS DOCKETED INSULATION OR INSULATING MATERIAL GROUP: subject to item Barriers, Shields, Windows or Glass Window Lights or Blocks, radiation shielding, etc... Cancel; see item NOTE Cancel; see item THIS SPACE INTENTIONALLY LEFT BLANK Page 7
8 SUBJECT 8 DOCKET APPROVED AS DOCKETED Concluded INSULATION OR INSULATING MATERIAL GROUP: subject to item Insulation or Insulating Material, viz.: Barriers, Shields, Windows or Glass Window Lights or Blocks, radiation shielding, with or without frames, see Note, item ; Felt or Felt Paper; Fire Blocking or Sound Attenuation Material, consisting of glass fibers and unexpanded vermiculite, in sheet form, cut, grooved or bent; Insulation or Insulating Material, NOI; Mineral Wool (Rock, Slag or Glass Wool) or Synthetic Vitreous Fiber; Silencers or Sound Traps, air duct, sheet steel or sheet steel and insulating material combined; Sleeves or Hollow Shapes, mold riser, exothermic compound; Sound Deadening Material, NOI; In packages, subject to Items 170 and 171 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 1 but less than Sub 3 2 but less than Sub 4 4 but less than Sub 5 6 but less than Sub 6 8 but less than Sub 7 10 but less than Sub 8 12 but less than Sub 9 15 but less than Sub but less than Sub or greater NOTE Shipments must have protruding parts adequately protected from (NEW) possible damage, or such parts must be detached and separately boxed NOTE Cancel; no further application Laminated Wood Fiber, sheeted, NOI, etc... Cancel; obsolete Silencers or Sound Traps, air duct, etc... Cancel; see item Vegetable Fiber Felt, NOI, quilted, etc... Cancel; obsolete Items and are canceled with reference to item , and the description of item is amended accordingly. Item is concurrently amended to provide the CCSB s standard eleven-subprovision density scale that ranges from class 400 for densities of less than 1 pcf to class 60 for densities of 30 pcf or greater. Note, item is canceled and reestablished as new Note, item Note, item is canceled as having no further application, and items and are canceled as obsolete. Staff Contact: Nathan D. Ripke Telephone (703) ripke@nmfta.org Page 8
9 SUBJECT 9 DOCKET APPROVED AS DOCKETED CHEMICALS GROUP: subject to item Silica Gel, including Silica Gel Catalyst or Desiccants, in bags, boxes, drums or pails, subject to Item 170 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 10 but less than Sub 3 15 or greater Item is amended to provide density-based classes, with class 125 assigned to densities of less than 10 pcf, class 85 assigned to densities of 10 but less than 15 pcf, and class 65 assigned to densities of 15 pcf or greater. Concurrently, the minimum packaging requirements are amended to include in pails. Staff Contact: Nathan D. Ripke Telephone (703) ripke@nmfta.org SUBJECT 10 DOCKET APPROVED AS DOCKETED PAPER ARTICLES GROUP: subject to item Forms, protective packing, interior or exterior, molded wood pulp, etc... Cancel; see item Forms, protective packing, interior or exterior, NOI, fiberboard, paper or pulpboard, corrugated, fluted or indented, etc... Cancel; see item Forms, protective packing, interior or exterior, NOI, fiberboard, paper, paperboard, pulpboard or molded pulp, combined or not combined with other materials, see Notes, items , and , in packages, subject to Item 170 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 6 but less than Sub 3 12 or greater NOTE No Change NOTE Does not apply on loosefill packing material as named in item NOTE Cancel; no further application NOTE No Change. Page 9
10 SUBJECT 10 DOCKET APPROVED AS DOCKETED Concluded Items and are canceled with reference to item Concurrently, item is amended to apply on interior or exterior protective packing forms constructed of fiberboard, paper, paperboard, pulpboard or molded pulp, combined or not combined with other materials, with classes predicated on density. Class 200 is assigned to densities of less than 6 pcf, class 110 is assigned to densities of 6 but less than 12 pcf, and class 70 is assigned to densities of 12 pcf or greater. Note, item is amended for simplification and uniformity, and Note, item is canceled as having no further application. Staff Contact: Erin N. Topper Telephone (703) topper@nmfta.org SUBJECT 11 DOCKET APPROVED AS DOCKETED PLUMBERS GOODS GROUP: subject to item Baths, Bathtubs, Pool Shells, Shower Baths (Showers), Shower Stalls or Spas, NOI, in boxes or crates, see Note, item , subject to Items 170 and 171 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 1 but less than Sub 3 2 but less than Sub 4 4 but less than Sub 5 6 but less than Sub 6 8 but less than Sub 7 10 but less than Sub 8 12 but less than Sub 9 15 or greater NOTE No Change Drinking Fountains, cast iron, in boxes or crates Drinking Fountains, china or earthenware, in boxes, crates or drums Fixtures, plumbers, cast iron, china or earthenware, returned to the original manufacturer as not being suitable for their intended purpose, etc... Cancel; see items otherwise applicable NOTE Cancel; no further application. Page 10
11 SUBJECT 11 DOCKET APPROVED AS DOCKETED Continued PLUMBERS GOODS GROUP: subject to item Plumbers Goods, viz.: Bathroom or Lavatory Fixtures, NOI; Dispensers, shampoo, soap or toiletry, see Note, item ; Fittings, bathtub, drinking fountain, lavatory, laundry tub, sink, shower bath (shower), toilet or urinal, see Note, item ; Plumbers Goods, NOI; Sink or Lavatory Legs or Pedestals; Sinks, Lavatories or Lavatory Basins or Bowls, NOI, also in Packages 977 or 1383; Sinks or Tubs, laundry, NOI, with or without legs or pedestals; Toilet Bowls, NOI, see Note, item , also in Package 104; or Toilet Tanks, NOI; Toilets, NOI; In boxes or crates, subject to Items 170 and 171 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 1 but less than Sub 3 2 but less than Sub 4 4 but less than Sub 5 6 but less than Sub 6 8 but less than Sub 7 10 but less than Sub 8 12 but less than Sub 9 15 but less than Sub but less than Sub or greater NOTE No Change NOTE No Change Toilet Bowls, china or earthenware, see Note, item , in boxes, crates or Package 104, having a density of 8 pounds or greater per cubic foot, see Note, item NOTE No Change Toilet Tanks, china or earthenware, in boxes or crates, having a density of 8 pounds or greater per cubic foot, see Note, item NOTE No Change Urinal Stalls, in one piece, china or earthenware, in boxes, crates or drums Urinal Stalls, KD, china or earthenware, in boxes, crates or drums Urinals or Urinal Gutters, china or earthenware, in boxes, crates or drums Urinals or Urinal Gutters, iron or steel: Sub 1 Enameled, in boxes or crates Sub 2 Other than enameled, in packages Page 11
12 SUBJECT 11 DOCKET APPROVED AS DOCKETED Concluded Item , applicable to cast iron, china or earthenware bathtubs, drinking fountains, laundry tubs, lavatories, lavatory basins (bowls), sinks, toilet bowls, toilet tanks, urinals or urinal stalls being returned to the original manufacturer as not being suitable for their intended purpose, is canceled with reference to the respectively applicable provisions, as shown. Staff Contact: William F. Mascaro Telephone (703) SUBJECT 12 DOCKET APPROVED AS DOCKETED AGRICULTURAL IMPLEMENT PARTS GROUP: subject to item Wheels, iron, NOI, finished or not finished, with or without lubricators or bearing races, not including machine finished gear or sprocket wheels, see Note, item 11542, in packages: Subs 1-2 No Change NOTE No Change. ALUMINUM: subject to item Plates, tank, not polished, in packages... No Change CARBON: subject to item Scrap, see Note, item 40702, in packages... No Change NOTE No Change. CONDUITS, OTHER THAN EARTHEN, GROUP: subject to item Conduits or Pipe, drainage, sewer or other underground work, or Connections or Fittings therefor, bituminized fiber (asphalt or pitch impregnated fiber) or indurated, in packages, see Notes, items and 50953: Subs 1-3 No Change NOTE No Change NOTE No Change Pipe or Tubing; nickel or nickel-copper; or nickel-iron-chromium alloy, see Note, item 52132; in packages... No Change NOTE No Change Strainers, pipeline, brass, bronze or copper body, in boxes... No Change Strainers, pipeline, iron or steel body, in packages... No Change Supports, iron or steel, consisting of anchors, arches, brackets, chairs, rests, rolls or sleeves, in packages... No Change Traps, grease or gas, iron or steel body, in packages... No Change COVERS: subject to item Meter Box, cast iron, with or without fasteners, in packages... No Change CUPRO-NICKEL: subject to item Scrap, in packages... No Change ELECTRICAL EQUIPMENT GROUP: subject to item Couplings, conduit, cast iron, inside diameter not less than two inches, without attachments, in packages... No Change Page 12
13 SUBJECT 12 DOCKET APPROVED AS DOCKETED Concluded Glass Factory Flattening Stones, Floats, Gathering Rings or Pot Rings or Glasshouse Pots, clay, in boxes, crates or drums or on skids... No Change Gun Barrel Tubes, rough bored, in boxes... No Change HARDWARE GROUP: subject to item Hooks, NOI, iron or steel, galvanized, plain, japanned or tinned, or brass, bronze, copper or cadmium coated, in packages... No Change Lugs or Shoes, silo or tank, iron, in packages... No Change Scale Testing Weights, iron, in packages... No Change IRON OR STEEL: subject to item Flooring, Roofing, Decks, Decking or Beams, made wholly or in part of steel 14 gauge or thinner, 4½ inches or more in depth, not nested, in packages... No Change Furnace Salamanders or Ladle Skulls, in packages... No Change Hangers, pipe, NOI, in packages... No Change Pins, bridge or drift, in packages... No Change Rings, rolled steel, NOI, see Note, item , in packages... No Change NOTE No Change Scrap, NOI, copper clad, see Note, item , in boxes or drums... No Change NOTE No Change Scrap, NOI, not copper clad, see Note, item , in packages. No Change Turnbuckles or Sleeve Nuts, NOI, threaded, not insulated, see Note, item , in packages... No Change NOTE No Change Weights, counterbalance, NOI, not machined, in packages... No Change Weights, sash, in packages... No Change The packaging exceptions based on product weight are removed from the items shown, with no changes to the applicable classes. The packaging exception based on shipment weight in item is concurrently removed, with no class change. Staff Contact: Erin N. Topper Telephone (703) Page 13
14 SUBJECT 13 DOCKET APPROVED AS DOCKETED ALUMINUM: subject to item Aluminum Articles, NOI, in boxes or crates; Lineal Shapes or Molding, NOI, in packages; or Cups, Dishes, Pans, Plates or Trays, NOI, foil or sheet, expendable, with or without covers, see Note, item 13121, in boxes; subject to Items 170 and 171 and having a density in pounds per cubic foot of: Sub 1 Less than Sub 2 1 but less than Sub 3 2 but less than Sub 4 4 but less than Sub 5 6 but less than Sub 6 8 but less than Sub 7 10 but less than Sub 8 12 but less than Sub 9 15 but less than Sub but less than Sub or greater NOTE No Change Lineal Shapes or Molding, roll formed or extruded, in straight lengths of uniform cross-sectional dimension, etc... Cancel; see item NOTE Cancel; no further application NOTE Cancel; no further application NOTE Cancel; no further application. Item is canceled with reference to item 13120, with no change to the applicable class. Notes, items 13517, and are canceled as having no further application. Concurrently, the packaging exception contingent on product weight is removed. Staff Contact: Erin N. Topper Telephone (703) topper@nmfta.org SUBJECT 14 DOCKET APPROVED AS DOCKETED CHEMICALS GROUP: subject to item Metal Pickling Compounds, dry, etc... Cancel; obsolete PACKING GROUP: subject to item Flax, etc... Cancel; obsolete Metal, etc... Cancel; obsolete NOTE Cancel; no further application. PRINTED MATTER GROUP: subject to item Checks, United States Treasury, cashed, etc... Cancel; obsolete NOTE Cancel; no further application. Page 14
15 SUBJECT 14 DOCKET APPROVED AS DOCKETED Concluded WASTE MATERIALS GROUP: subject to item Liquor, tanning, spent, etc... Cancel; obsolete Items 45220, , , and are canceled as obsolete. Notes, items and are canceled as having no further application. Staff Contact: Nathan D. Ripke Telephone (703) SUBJECT 15 DOCKET APPROVED AS DOCKETED MEATS OR SHORTENING GROUP: subject to item Coconut Oleine, etc... Cancel; obsolete Muffles, clay, etc... Cancel; obsolete Neatsfoot Stock, etc.... Cancel; obsolete Rosin Dross or Rosin Batting Dross, etc.... Cancel; obsolete NOTE Cancel; no further application. Items , , and are canceled as obsolete. Note, item is canceled as having no further application. Staff Contact: Allison L. Austin Telephone (703) SUBJECT 6 DOCKET DEFERRED SUBJECT APPROVED AS MODIFIED DRAWING INSTRUMENTS, OPTICAL GOODS OR SCIENTIFIC INSTRUMENTS: subject to item Contact Lenses, soft, in saline solution, in inner containers in boxes (NEW) Lenses, optical, NOI, etc.... No Change Optical Goods or Instruments, NOI, etc.... No Change New item is established for soft contact lenses, at class 175. Staff Contact: George M. Beck Telephone (703) beck@nmfta.org Page 15
NOTICE OF DISPOSITION DOCKET
DISPOSITION BULLETIN 1315 May 6, 2011 NOTICE OF DISPOSITION DOCKET 2011-2 This notice reflects proposed amendments considered by the Commodity Classification Standards Board (CCSB) at the public meeting
More informationStaff Contact: Nathan D. Ripke Telephone (703) Item Description Class
Re: Insulation or Insulating Material Staff Contact: Nathan D. Ripke Telephone (703) 838-1869 ripke@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions Item
More informationNOTICE OF DISPOSITION DOCKET
DISPOSITION BULLETIN 1348 May 26, 2017 NOTICE OF DISPOSITION DOCKET 2017-2 This notice reflects proposed amendments considered by the Commodity Classification Standards Board (CCSB) at the public meeting
More informationRe: Cable Terminals, Cable Terminal Boxes or Housings or Electric Meter Sockets, or Cable Terminal or Junction Blocks
Re: Cable Terminals, Cable Terminal Boxes or Housings or Electric Meter Sockets, or Cable Terminal or Junction Blocks Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent:
More informationNOTICE OF DISPOSITION DOCKET
DISPOSITION BULLETIN 1346 February 3, 2017 NOTICE OF DISPOSITION DOCKET 2017-1 This notice reflects proposed amendments considered by the Commodity Classification Standards Board (CCSB) at the public meeting
More informationStaff Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Automobile Parts Various Items Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions Item
More informationStaff Contact: Erin N. Topper Telephone (703) Item Description Class
Re: Pipe, Tubing or Fittings, iron or steel Staff Contact: Erin N. Topper Telephone (703) 838-8856 topper@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions
More informationRe: Electrical Switch Boxes, Enclosures, Outlet Boxes or Outlet Box Covers, or Junction Boxes or Cabinets, steel Item 63170
Re: Electrical Switch Boxes, Enclosures, Outlet Boxes or Outlet Box Covers, or Junction Boxes or Cabinets, steel Item 63170 Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org
More informationDOCKET FEBRUARY 2018
DOCKET 2018-1 FEBRUARY 2018 A public meeting on National Motor Freight Classification provisions will be held on February 13, 2018 at: Hyatt Regency Newport Beach 1107 Jamboree Road Newport Beach, California
More informationNOTICE OF DISPOSITION DOCKET
DISPOSITION BULLETIN 1350 February 16, 2018 NOTICE OF DISPOSITION DOCKET 2018-1 This notice reflects proposed amendments considered by the Commodity Classification Standards Board (CCSB) at the public
More informationStaff Contact: Erin N. Topper Telephone (703) Item Description Class
Re: Flooring, Wall Coverings or Wallpaper Staff Contact: Erin N. Topper Telephone (703) 838-8856 topper@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions Item
More informationRe: Ceiling or Interior Siding or Ceiling or Interior Siding Moldings, Panels or Ornaments, metal, with or without acoustical or insulating material
Re: Ceiling or Interior Siding or Ceiling or Interior Siding Moldings, Panels or Ornaments, metal, with or without acoustical or insulating material Staff Contact: Daniel E. Horning Telephone (703) 838-1820
More informationCCSB Contact: Daniel E. Horning Telephone (703) Item Description Class
Re: Racks, pallet, storage or warehouse Item 164340 CCSB Contact: Daniel E. Horning Telephone (703) 838-1820 horning@nmfta.org Proponent: Commodity Classification Standards Board Present Classification
More informationCCSB Contact: Matthew S. Erim Telephone (703) Item Description Class
Re: Scaffolds, Scaffolding, or Scaffold Sections or Components CCSB Contact: Matthew S. Erim Telephone (703) 838-1825 erim@nmfta.org Proponent: Commodity Classification Standards Board Present Classification
More informationDOCKET JANUARY 2016
DOCKET 2016-1 JANUARY 2016 A public meeting on National Motor Freight Classification provisions will be held on January 26, 2016 at: Westin Cape Coral Resort 5951 Silver King Boulevard Cape Coral, Florida
More informationStaff Contact: Erin N. Topper Telephone (703) Item Description Class
Re: Stone Blocks, Pieces or Slabs Staff Contact: Erin N. Topper Telephone (703) 838-8856 topper@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions Item Description
More informationCCSB Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Helicopter Rotor Blades or Rotor Blade Leading Edge Covering CCSB Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present
More informationStaff Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Tanks, iron or steel, including Expansion Tanks Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present Classification
More informationCCSB Contact: Shannon C. Allard Telephone (703) Item Description Class
Re: Wrapping Paper, including Wrapping Paper Sets CCSB Contact: Shannon C. Allard Telephone (703) 838-1809 allard@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions
More informationCCSB Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Grading or Road Making Attachments or Implements CCSB Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present Classification
More informationStaff Contact: Daniel E. Horning Telephone (703) Item Description Class
Re: Partitions or Partition Doors, steel and wire combined Staff Contact: Daniel E. Horning Telephone (703) 838-1820 horning@nmfta.org Proponent: Commodity Classification Standards Board Present Classification
More informationStaff Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Pneumatic Tires Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions Item Description Class
More informationRe: Bars, nutritional or snack, granola, cereal, grain or protein, with or without fruit, nuts or other ingredients
Re: Bars, nutritional or snack, granola, cereal, grain or protein, with or without fruit, nuts or other ingredients Staff Contact: Allison L. Austin Telephone (703) 838-8864 austin@nmfta.org Proponent:
More informationCCSB Contact: Erin N. Topper Telephone (703) Item Description Class
Re: Welding Bars, Rods or Wire (Welding Electrodes), iron or steel CCSB Contact: Erin N. Topper Telephone (703) 838-8856 topper@nmfta.org Proponent: Commodity Classification Standards Board Present Classification
More informationStaff Contact: George M. Beck Telephone (703) Item Description Class
Re: Boxes or Chests, NOI, cooling; Coolers, NOI; Ice Buckets; Containers, liquid or beverage serving; or Coolers or Cooling Boxes, beverage, containing refrigerant; hand portable, expanded plastic Staff
More informationRe: Machines, Systems or Devices, data processing, or Components or Parts thereof Item
Re: Machines, Systems or Devices, data processing, or Components or Parts thereof Item 116030 Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification
More informationChapter 73. Articles of iron or steel
Chapter 73 Articles of iron or steel Notes. 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
More informationSECTION PLUMBING FIXTURES
SECTION 15440 - PLUMBING FIXTURES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, are a part of this Section. 1.02 SUMMARY A.
More informationStaff Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Costumes Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present Classification Provisions Item Description Class CLOTHING
More informationCCSB Contact: William F. Mascaro Telephone (703) Item Description Class
Re: Household Goods, including Personal Effects or Military Baggage CCSB Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent: Commodity Classification Standards Board Present
More informationDOCKET SEPTEMBER 2015
DOCKET 2015-3 SEPTEMBER 2015 A public meeting on National Motor Freight Classification provisions will be held on September 29, 2015 at: Westin Denver Downtown 1672 Lawrence Street Denver, Colorado 80202
More informationDesign & Construction Standards, Revised January
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
More informationUniversity of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 40 00_PLUMBING FIXTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5.
More informationPIPING SPECIALTIES (PLUMBING) A. American Society for Testing and Materials (ASTM):
SECTION 15430 PIPING SPECIALTIES (PLUMBING) PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 15410 - Piping (Plumbing). 1.02 REFERENCES A. American Society for Testing and Materials (ASTM): 1. A126-95
More informationBuilding Systems and Design Elements included in SliDeRulE
Building Systems and Design Elements included in SliDeRulE No. System Subsystem Design Element 1.1.1 Foundation Deep Foundation Steel H-pile 1.1.2 Foundation Deep Foundation Steel pipe pile 1.1.3 Foundation
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of work
More informationDIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,
More informationGeneral Conditions 39,522 5, ,292 26,050 75,921 1, Labor hours
Basic Edition Standard Estimate Report Page 1 Name 1000 General Conditions 1107 Professional Consultant 10 Surveying 1.00 day 600.000 /day 600 - - - - - - 600 Professional Consultant 600 600 8.00 hours
More information2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING
2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING E3305.3: now reads The space equal to the width and depth of the panelboard and extending
More informationStaff Contact: Daniel E. Horning Telephone (703) Item Description Class
Re: Joints or Seals, pavement, including Expansion Joints or Seals Staff Contact: Daniel E. Horning Telephone (703) 838-1820 horning@nmfta.org Proponent: Commodity Classification Standards Board Present
More information2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property
2008 NEC Guide Lines for Home Owner Doing Electrical Work on their Property A brief summary of the most used code references for residential wiring State of Idaho Division of Building Safety Electrical
More informationExhibit A Declaration of Restrictions Development and Design Standards For Ridge Park Estates
Exhibit A Declaration of Restrictions Development and Design Standards For Ridge Park Estates Spokane County, Washington For All Property Owners The following Development and Design Standards shall be
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
Page 220529-1 SECTION 220529 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationCUSTOMS TARIFF - SCHEDULE. Chapter 74 COPPER AND ARTICLES THEREOF
74 - i Chapter 74 COPPER AND ARTICLES THEREOF Note. 1. In this Chapter the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85% by weight
More informationLight-Metal Roof Edge, Raised
NAIL WOOD CANT TO BLOCKING 2 ROWS STAGGERED EACH ROW 24 O.C. 1/2 MIN. 10 0 MAX. FASTEN 18 O.C. WITH NEOPRENE GASKETED FASTENERS 3-1/2 MIN. 4 6 JOINT COVER PLATE SET IN TWO BEADS OF SEALANT 4 MIN. SPECIFIED
More informationCHAPTER 26 PLASTIC SECTION BC 2601 SECTION BC 2603 GENERAL FOAM PLASTIC INSULATION
CHAPTER 26 PLASTIC SECTION BC 2601 GENERAL 2601.1 Scope. These provisions shall govern the materials, design, application, construction and installation of foam plastic, foam plastic insulation, plastic
More informationTEXAS DEPARTMENT OF HOUSING AND COMMUNITY AFFAIRS OFFICE OF COLONIA INITIATIVES TEXAS BOOTSTRAP LOAN PROGRAM. Form 15 Work Write-Up
TEXAS DEPARTMENT OF HOUSING AND COMMUNITY AFFAIRS OFFICE OF COLONIA INITIATIVES TEXAS BOOTSTRAP LOAN PROGRAM Form 15 Work Write-Up Owner-Builder Applicant Owner-Builder Co-Applicant Physical Address: City,
More informationSeal Harbor Development 1 Nagog Park Acton, MA 01720
Seal Harbor Development 1 Nagog Park Acton, MA 01720 Specifications for Ocean Mist Villages Foundation and Concrete Floors Footings All footings are constructed and poured with 3000 lb mix, continuous
More informationEstablished DOC. NO : SSI / PROFILE Rev-03
Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming
More information1.04 SUBMITTALS PLUMBING FIXTURES
SECTION 15440 - PLUMBING FIXTURES PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationB. American Society for Testing and Materials: 1. ASTM F708 - Standard Practice for Design and Installation of Rigid Pipe Hangers.
SECTION 230529 - HANGERS AND SUPPORTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Sleeves. 6. Mechanical sleeve seals. 7. Firestopping
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationDOCKET JANUARY 2013
DOCKET 2013-1 JANUARY 2013 A public meeting on National Motor Freight Classification provisions will be held on January 29, 2013 at: The Westin San Diego Hotel 400 West Broadway San Diego, California 92101
More informationPembridge The Country Club Collection TOWNHOMES AT CRYSTAL SPRINGS
Pembridge The Country Club Collection TOWNHOMES AT CRYSTAL SPRINGS STANDARD FEATURES LIST Foundation Concrete walls 4 concrete floor slab Interior basement unfinished Standard nine foot foundation walls
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More informationDivision 11 - Equipment Section 11401
PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included
More informationDavis Frame Co., Inc. Construction Budget Considerations
Davis Frame Co., Inc. Construction Budget Considerations ITEM BID 1 BID 2 BID 3 MISCELLANEOUS COSTS Surveying Building Permit Engineering Fees Interest on Construction Loan Property Taxes Hazard & Liability
More informationoptional parts for geberit Duofix carrier
geberit Duofix carrier.335.00.5 Installation accessories for concealed tank and carrier for wall-hung toilet. Accessories shall be for alternate frame installation and connection sets between carrier and
More informationACCESSORY STRUCTURE Building permit information For 1 & 2-family dwellings
ACCESSORY STRUCTURE Building permit information For 1 & 2-family dwellings Building Safety Department 400-2 nd Street South St. Cloud, MN 56301 (320) 255-7239 A building permit is required for any accessory
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationOKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA
106-5(a-f) 09 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA These Special Provisions amend, revise, and where in conflict, supersede applicable sections of the 2009 Standard
More informationEstimate Form for Bathroom Design and Installation
Estimate Form for Bathroom Design and Installation Name: Home Address: City: State: Phone (Home): Phone (Office): Phone (Office): Phone (Office): Phone (Jobsite): Jobsite Address: City: State: By: Hereafter
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More informationGeneral Information Series No. 755
55-Gallon Steel Drums on Pallets Secured with Cordstrap Barriers in 40-ft ISO Containers (Nonhazardous Materials only) ILG Method I-6 (New) Approved by DAMAGE PREVENTION & FREIGHT CLAIM COMMITTEE Association
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationA. Codes and Standards that are standard at the University. C. Coordinate cleanout locations with Architect.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationFIXTURE CARRIERS TABLE OF CONTENTS S-WD-FC
TABLE OF CONTENTS Pictorial Index Product Recommendations Water Closet Carriers Matching Water Closet & Carrier Closet Carrier Selection & Battery Set-Up Stud & Nipple Adjustment to Finished Wall Anchoring
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationBASEMENT FINISH PERMIT AND BUILDING CODE REQUIREMENTS (REVISED 3/6/2018)
BASEMENT FINISH PERMIT AND BUILDING CODE REQUIREMENTS (REVISED 3/6/2018) PERMIT SUBMITTAL CHECKLIST: Signed and completed Building Permit application form. A separate Electrical permit is required from
More informationSECTION V HANDLING & TRANSFER CHARGES GENERALLY APPLICABLE TO CARGO <<< BACK TO TARIFF INDEX
SECTION V HANDLING & TRANSFER CHARGES GENERALLY APPLICABLE TO CARGO Charges published in this section are subject to all rules, regulations and provisions published in other sections of this tariff, and
More informationC. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationPlanning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
More informationCHAPTER 73 ARTICLES OF IRON OR STEEL
CHAPTER 73 ARTICLES OF IRON OR STEEL NOTES: 1. In this Chapter, the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
More informationFlotation Docking Systems, Inc.
GENERAL SPECIFICATIONS The following data outlines the design calculations and specifications around which Flotation Docking Systems, Inc. products are constructed. The use of such information for contract
More informationPART 5 WATER SYSTEMS
PART 5 WATER SYSTEMS Abbreviations and Symbols Plan 501 Abbreviations and symbols for water... 205 Concrete Boxes and Hardware 502 27" Frame and cover... 207 503 38" Frame and cover... 209 505 Concrete
More information6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.
6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4. 6.2 OVERHEAD SERVICES Wiring of any premises for connection
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationCHAPTER 26 PLASTIC SECTION 2601 SECTION 2603 GENERAL FOAM PLASTIC INSULATION
CHAPTER 26 PLASTIC SECTION 2601 GENERAL 2601.1 Scope. These provisions shall govern the materials, design, application, construction and installation of foam plastic, foam plastic insulation, plastic veneer,
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationUNDERGROUND SERVICES (RESIDENTIAL) SINGLE FAMILY RESIDENTIAL, DUPLEXES, OR TOWNHOUSES
7.01 GENERAL UNDERGROUND SERVICES (RESIDENTIAL) SINGLE FAMILY RESIDENTIAL, DUPLEXES, OR TOWNHOUSES Also refer to Chapter 3 (Service Entrances), and Chapter 4 (Metering Installation). OPPD will install,
More informationIt is proposed to amend Item (Rule) 181, Furniture Package Performance Testing, as follows: FURNITURE PACKAGE PERFORMANCE TESTING
Re: Item (Rule) 181, Furniture Package Performance Testing Staff Contact: Erin N. Topper Telephone (703) 838-8856 topper@nmfta.org Proponent: Smurfit-Stone Container Corporation s Package Performance Test
More informationSECTION PLUMBING PIPING SYSTEMS
SECTION 15300 PLUMBING PIPING SYSTEMS PART 1 - GENERAL 1.01 SPECIAL NOTICE A. Each contractor shall read all relevant documents, become familiar with the job, the scope of work, type of general construction,
More information5. AMCA 301 Method of Publishing Sound Ratings for Air Moving Devices. 6. AMCA 500 Test Methods for Louver, Dampers, and Shutters
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationFOURTH SCHEDULE. [Subsection 33c(1)] STANDARDS FOR CERTIFICATION OF CONSTRUCTION MATERIAL
1. SANITARY WARES 1.1 Ceramic wash basins 1.2 1.3 1.4 Ceramic water closet pans without flushing cisterns Ceramic water closet pans with flushing cisterns Ceramic bidets and urinals (floor or wall mounted)
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.
More informationValance Installation. For Units with Beam Style Coils
Valance Installation For Units with Beam Style Coils 1. Before installation of valance units, determine if drapes are to be used, or if any wall construction will protrude into room. If either drapes or
More informationSECTION OUTLET, PULL, AND JUNCTION BOXES
SECTION 16131 OUTLET, PULL, AND JUNCTION BOXES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09900 - Painting. 2. 16112 - Raceways and Conduits. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
More informationPower Electronics, Inc. Packaged Equipment Center Standard Construction and Design Features
DESIGN CRITERIA FOR STANDARD CONSTRUCTION: These standard design elements of the P.E.I. Power Equipment Center are utilized to meet the following design criteria per ASCE 7-05 as adopted by the IBC (International
More informationSECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
More informationREAD ONLY. Adopting Agency BSC SFM. Adopt Entire Chapter X X X Adopt Entire Chapter as amended (amended sections listed below) X X X X X X
CALIFORNIA PLUMBING CODE MATRIX ADOPTION TABLE CHAPTER 9 - VENTS (Matrix Adoption Tables are non-regulatory, intended only as an aid to the user. See Chapter 1 for state agency authority and building application.)
More informationCONDUITS AND FITTINGS
CONDUIT AND FITTINGS Rigid Steel Conduit 3801 Rigid PVC Conduit 3803 HDPE Conduit 3803 Flexible Non Metallic Liquid Tight Conduit Type LFNC-B 3804 PVC Coated Urethane Lined Galvanized Rigid Steel Conduit
More informationHIGH PILED COMBUSTIBLE STORAGE CITY OF NOVI SUBMITTAL CHECKLIST In Accordance with Chapter 23 of the 2006 International Fire Code
Project Name/Tenant: HIGH PILED COMBUSTIBLE STORAGE CITY OF NOVI SUBMITTAL CHECKLIST In Accordance with Chapter 23 of the 2006 International Fire Code Site Address: Applicant: Phone: Bldg/Unit/Suite: A
More informationRESIDENTIAL BUILDING PLAN REQUIREMENTS
CITY OF MANSFIELD BUREAU OF BUILDING AND CODES 30 NORTH DIAMOND STREET 3RD FLOOR MANSFIELD, OHIO 44902 Phone (419) 755-9688 Fax (419) 755-9453 www.ci.mansfield.oh.us RESIDENTIAL BUILDING PLAN REQUIREMENTS
More informationSECTION DRAINAGE AND VENT SYSTEMS CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 The design guidelines contained herein include the requirements for drainage and vent systems utilized at The University of Texas at Austin. It is the intention of this document to
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More information