Series AS-FPQ/AS-FPG. Speed Controller with for Clean Room. Speed controllers for clean room use

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG Series -FPG Series -FPQ P N Speed controllers for clean room use V S R Q -FPQ: (electroless nickel plated) and -FPG: are now available as

Metal One-touch Fittings. Applicable Tube. Tube material Tube O.D. Specifications

Courtesy of C/Flodyne/ydradyne otion Control ydraulic neumatic Electrical echanical (00) -0 www.cmafh.com Spare arts Description Gasket Bulkhead nut Construction Tube O.D. ø ø ale connector art no. -G

Stainless Steel 316 One-touch Fittings. Applicable Tube. Tube material Tube O.D. Specifications

Stainless Steel One-touch Fittings Tube: etric Size, Thread:, R, Rc Series KG Tube RoS etric Size KG Spare arts Description Gasket Bulkhead nut Tube O.D., ø ø art no. -G KG-01 KG0-01 KG0-01 KG-01 KG-01

Metal One-touch Fittings. Applicable Tube. Tube material Tube O.D. Specifications

Courtesy of C/Flodyne/ydradyne otion Control ydraulic neumatic Electrical echanical (00) 6-50 www.cmafh.com Spare arts Description Gasket Bulkhead nut Tube O.D. ø1/" ø" ø/" Construction ale connector art

Stainless Steel 316 One-touch Fittings. Applicable Tube. Tube material Tube O.D. Specifications

Stainless Steel One-touch Fittings Tube: Inch Size, Thread: Series KG Tube RoS etric Size KG Spare arts Description Gasket Bulkhead nut Tube O.D. ø1/", ø" ø/" Construction art no. -G KG1-01 KG7-01 KG-01

VK 3. Control Equipment Control Equipment

2 3 Control Equipment Control Equipment SC7 SC7 5 SC7 M5.8 Effective Metered flow.5 sectional area mm 2 Free flow. Flow rate Metered flow 75 /min(anr) Free flow 7 Workin fluid Recommended tube SC7 M5.8

UFR+L FILTER REGULATOR + LUBRICATOR

FEATURES The UFR+L filter regulator + lubricator is intended for the treatment of compressed air or compressed gas. Its function is that of supplying filtered, lubricated air at the desired pressure for

Clean Air Filter. Series SFD. Hollow Fiber Element

Clean Air Filter Series Hollow Fiber Element Nominal filtration rating: 0.0 μm (filtration efficiency 99.99%) Initial pressure drop: 0.0 MPa (at inlet pressure 0.7 MPa, maximum flow) Maximum operating

Dimensions / Order Codes

Cushion Clamp Series Dimensions / Order Codes Clamp Assembly Types STC / SPC (for Use with Channel Rail SCS) G Design Load 1 D C ØD1 E B* Design Load 3 (Maximum Load in Pipe Direction) Design Load 2 Outside

Tubing Size 1/4-3/8 1/4 Flow Glass Filled Polypropylene

Tubing Size 1/4-3/8 1/4 Flow Glass Filled Polypropylene 50GP Series Socket 50GP Series couplings are manufactured from a high performance glass filled polypropylene. With excellent chemical resistance

Series SFA100/200/300

Cartridge Type/Disc Style Series SF00/200/300 Precision filtration for general gases used in the electronic industry, etc. Compressed air, Nitrogen, etc. PTFE membrane element is made into a cartridge.

Series 805 Mighty Mouse Triple-Start ACME Thread Receptacle

Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.

50AC Series Couplings

50AC Series Couplings Tubing Size 1/4-3/8 1/4 Flow Acetal (POM) These 1/4 flow size couplings are produced in a durable natural Acetal (POM) thermoplastic. They feature a more cost efficient plastic thumb-latch

Phone: +49 (0) 231 / Fax: +49 (0) 231 / Spring hinges. Art.: 6164 Art.

hinges Art.: 6062 Art.: 6063 Art.: 6064 Art.: 6065 Art.: 6066 Art.: 6067 Art.: 6068 Art.: 6164 Art.: 6165 Art.: 6166 Art.: 6105 Art.: 6169 Art.: 6167 Art.: 6486 Art.: 6088 Art.: 6872 Art.: 6876 F-41 hinges

POLYPAC - PHD Seal. Double Acting Heavy Duty High Pressure Material: PTFE, NBR Elastomer, POM

POLYPAC - PHD Seal Double Acting Heavy Duty High Pressure Material: PTFE, NBR Elastomer, POM 61 62 PHD Seal Description The PHD Seal is a high-pressure heavy-duty piston seal with excellent leakage control

HLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting

G G B A S F J L2 L2 H2 LB2 N/ S/F Specifications Descriptions Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational

ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4

ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...

t This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of any order or contract or be

Index & Cam Plungers +44 (0) / / A05.1 Index & Cam Plungers 1

I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A05.1 Index & Cam s +44 (0) 117 916 0090 / sales@rencol.com / www.rencol.com A05.1 Index & Cam s 1 I N D U S T R I A L M A N

Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10

Clean Gas Filter Series Cartridge Type/Disposable Type Disposable type C0 Disposable type B30 Cartridge type 0 20 30 H HW T U B K MG FF M MD MH ME MF ZFC LLB D Cartridge type B0 B20 295 SMC Clean Gas Filter

40PP Series Couplings

Tubing Size 1/4-3/8 1/4 Flow Polypropylene 40PP Series Couplings 40PP Series couplings offer 1/4 flow and are produced from medical grade gamma sterilizable polypropylene. The 40PP Series polypropylene

Introducing. Twin Wheel. Casters. The newest, most. economical. addition to. RWM Casters

Introducing Twin Wheel Casters The newest, most economical addition to RWM Casters RWM is moving faster than ever with the introduction of our new TwinWheel casters! As worldwide caster specialists for

M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

MEDIDOR DE VAZÃO TIPO ENGRENAGENS PARA LIQUIDOS VISCOSOS SERIE DZR COM ENGRENAGENS CILINDRICAS

MEDIDOR DE VAZÃO TIPO ENGRENAGENS PARA LIQUIDOS VISCOSOS Measuring range:.- to 1-5 L/min Measuring accuracy: ±.3 up to ±1 % of actual flow pmax: bar tmax: 15 C Process connection: G 1, G 3, G 1, G 1 female

Gas Pressure Regulator HON 330

Gas Pressure Regulator HON 330 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 330.20 EDITION 01/2017 330.20 p. 2 330.20 p. 23 Compensating diaphragm (118,168, 243,

MV en /7 MV Knife gate valve DN

1/7 The Stafsjö knife gate valve is a valve designed for a wide range of process industry applications. Its main applications are fluids and suspensions up to 5%. It is also used in services with sludge,

KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE

Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty

ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64

ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe

Technical data Housing material &URTHERôVERSIONSôONôREQUEST

Silencer Plastic version Sintered bronze with thread or plug connection Various construction Flat design for restricted space Stainless steel silencer Silencers are used to reduce the noise level of the

Pre s sure Re gulators

www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch

Bore 15 and 20 Threaded male BSP 0 C + 30 C Max Pressure : 16 Bars Specifications : Single jet Rotating dial Super dry Magnetic transmission

Size : Ends : Min Temperature : Max Temperature : Bore 15 and 20 Threaded male BSP 0 C + 30 C Max Pressure : 16 Bars Specifications : Single jet Rotating dial Super dry Magnetic transmission Materials

16CS. Double acting Compressed air to 60 M LED (ON lighting) 980m/s 2

FH1 G B FH F J H2 LB2 N/ S/F Specifications Descriptions Size Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Open

Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16

Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated

CONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA CONDUIT AND FITTINGS FOR HYGIENIC DESIGN

CONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA CONDUIT AND FITTINGS FOR HYGIENIC DESIGN CONTENT PAGE Conduit selection table Anaconda Sealtite Food Grade Sealtite Material Material Temp. ( C)

36,50 21,50. RJ45, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 10 GIGABIT, CONTACT SALES OFFICE FOR TEST RESULTS

29,36 TYPICAL 26,98 TYPICAL 2,50 M28x - 6g TO SUIT H INTERFACE 4,93,250-0,P-0,3L-TS 3,25, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 0 GIGABIT, CONTACT OFFICE FOR

Pressure Regulators K Series

Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters

Pressure Regulators K Series

www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator

SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY

SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY Flow capacity* 200 sccm to 500 slpm (0.007 to 17.6 scfm) Vacuum to 2,300 psig (158 bar) inlet, 100 psig (7 bar) outlet

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION Request for Offer (RFO) SUPPLY AND DELIVERY OF DUCTILE IRON CEMENT LINED PRESSURE PIPES AND FITTINGS FOR HURSLEY ROAD AND TOOWOOMBA CECIL PLAINS ROAD (GREENWATTLE

Corrosiveness to Copper from Petroleum Products ASTM D130 - EN/ISO IP DIN ASTM D IP ASTM D7095.

ASTM - EN/ISO 2160 - IP 154 - DIN 51811 - ASTM D4048 - IP 112 - ASTM D7095 Item Unit TC16 Ordering code TC16 230V Circulator TC16 115V Circulator 50 or 60Hz 60Hz 31T0671 31T0861 Power [kw] 1.5 Range Reading

Size : Ends : Min Temperature : Max Temperature : Matierials : Brass body

Size : Ends : Min Temperature : Max Temperature : Bore 15 and 20 Threaded male BSP 0 C ( for cold water type ) + 90 C ( for hot water type ) Max Pressure : 16 Bars Specifications : Single jet Rotating

KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE

Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERA APPICATION Clean fluids, dirty

M33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

Flexpro. For Enhanced Joint Integrity. Style PN Normally used in male/female, tongue & groove, and other recessed flange configurations.

Flexpro For Enhanced Joint Integrity Although relatively new to the U.S. market, the Flexpro gasket has been providing an extremely tight, reliable seal in a wide range of applications throughout Europe

INDUSTRIAL THERMOMETERS

JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products

General Specification

General Specifications TB600G Laser Turbidity Meter GS 127A1 General With the recent development in membrane filtration technologies, organic filters have come into practical use as a highperformance treatment

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL and BEARINGS 303

CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING

P133 Pressure Regulator

P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial

PROGIA UNIT DETAIL OF COMPONENT PARTS TABLE OF CONTENTS

PROGIA UNIT DETAIL OF COMPONENT PARTS TABLE OF CONTENTS Page. DOCTOR SIDE HOLDER ---------------------------------------------------------------. ASSISTANT HOLDER ------------------------------------------------------------------.

Suffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White

Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey

Standard-Duty and Heavy-Duty Tube and Pipe Clamps

Standard-Duty and Heavy-Duty Tube and Pipe Clamps Table Of Contents Evolution of Clamps... 2 Tubing vs. Piping Difference/Comparison... 3 Features/Benefits of Clamps...4-5 Standard-Duty (Light-Duty) Clamps...6-7

Materials : Carbon steel or Stainless steel MERXTRADE BV.

ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications

CONOFLOW HIGH-PRESSURE REGULATOR - HP500 Pressure Reducing - Diaphragm Type - High Purity

CONOFLOW HIGH-PRESSURE REGULATOR - HP500 Pressure Reducing - Diaphragm Type - High Purity The HP500 Regulator is a self-contained, diaphragm sensing high purity regulator. A broad offering of materials

Mechanical Requirements for Stainless Steel & Non-Ferrous Fasteners

Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min

PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS

PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS Page i 1. TOP & SIDE FRAME ASSEMBLIES, 6001.... PAGE 2 2. TOP & SIDE FRAME ASSEMBLIES, 6000.... PAGE 6 3. SIDE FRAME & HYDRAULIC

M15 ISO Ball Valve DN¼" to DN2½"

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

Materials : Ductile iron body EN GJS 500-7

Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Flanges PN10/16-10 C + 70 C Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising stem Clockwise

DTS-HC High-Current Connectors

ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%

Plastic & Metal Hinges +44 (0) / / A08.1 Plastic & Metal Hinges 1

I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A08.1 Plastic & Metal Hinges +44 (0) 117 916 0090 / sales@rencol.com / www.rencol.com A08.1 Plastic & Metal Hinges 1 I N D U

Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models

www.swagelok.com Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators 2 Swagelok Pressure Regulator Features Stem Fine-pitch

Corrosiveness to Copper from Petroleum Products ASTM D130 - EN/ISO IP DIN ASTM D IP ASTM D7095.

ASTM - EN/ISO 2160 - IP 154 - DIN 51811 - ASTM D4048 - IP 112 - ASTM D7095 Item Unit TC16 Ordering code TC16 230V Circulator TC16 115V Circulator 50 or 60Hz 60Hz 31T0671 31T0861 Power [kw] 1.5 Range Reading

PACKLESS VALVES. Instrument/Analyzer Products. Catalog 4515/USA April 2003

PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 table of contents NV55........................ 1-2 Nova

M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150

Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.

Locks, Latches & Vents. Leaflet No. A10.1

I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A10.1 Locks, Latches & Vents I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are Rencol s flexible manufacturing

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304

CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300

Gas Pressure Regulator RMG 330

Gas Pressure Regulator RMG 330 Operation and Maintenance, 330.20 Spare Parts edition 11/1995 For integrated safety cutoff unit please refer to technical leaflet 720.20 Serving the Gas Industry WORLDWIDE

D-35 Series. Up to 37 gpm (140 l/min) D-35 Specialized Designs

D-35 Series Up to 37 gpm (14 l/min) D-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The D-35 Hydra-Cell

A Resource for Semiconductor Manufacturers. Illustrated Parts Guide for Varian VIISion 80, 80+, & 200

Illustrated Parts Guide for Varian VIISion 0, 0+, & 00 00--99 sales@glemco.com www.glemco.com G-0-0AH Rev0 Components for Varian VIIsion Source 00--99 sales@glemco.com www.glemco.com G-0-0AH Rev0 Components

ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#

ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in

Carbon steel or Stainless steel

MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure

Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More

Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products

Motor-driven Diaphragm Metering Pump

Motor-driven Diaphragm Metering Pump OPEN Easy, Tough and Safe This stylishly designed safe TACMINA metering pump is easy-to-use and user-friendly developed with excellent utility, functionality and durability.

E 444 E 454 E 464 E 644 Tank top mounting Connection up to SAE 2 Nominal flow rate up to 680 l/min / gpm

Return Filters E E 5 E 6 E 6 Tank top mounting Connection up to SAE Nominal flow rate up to 68 l/min / 79.7 gpm Description Application In the return line circuits of hydraulic systems. erformance features

AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017

AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017 Technical introduction AVK is a new patented range of composite push fittings combining the safety and strength of a traditional mechanical fitting

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO

CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR

Materials : Ductile iron body EN GJS 500-7

Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 PN10/16 flanges - 10 C + 70 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over Specifications : Non rising

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I.

0 SERIES Working pressure 60 bar Style S Style D.I. D.I. Technical data Filter housing (Materials) Head: luminium Housing: nodized luminium ypass valve: Nylon Pressure Working pressure: 60 bar (6 MPa)

CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors

CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors Standards Certification 94/9/EC (ATEX) Directive According to European Standards EN 60079-0 EN 60079-1 EN 61241-0 EN 61241-1 Protection degeree IP66/67

STC BSL & BESL Brass Silencer & Muffler Fittings

STC BSL & BESL Brass Silencer & Muffler Fittings STC Metal Fittings Specifications Operating Pressure 0 250 psi 0 1650 kpa Vacuum 0 29.5 inhg 750 mmhg Operating Temperature 5 230 F -15 110 C Sterilization

Paper type solvent filter Cartridge type solvent filter In-line filter. Uniform fiber diameter of 1 µm. Minimized deviation in particle size.

Sintered Stainless Steel Fiber Filters For precision filtration of fluids Paper type solvent filter Cartridge type solvent filter In-line filter Features: Higher efficiency and precision than the filtration

AUTOMATIC AIR VALVES For potable water

AUTOMATIC AIR VALVES For potable water Page N Air release valve Page N Air release valve avent Page N Air release valve DN 0 / DN 0, DN 150 / DN 00 Page N /1 Page N5 Combined air release valve Page N 5/1

D1 Series Multi-hole Cage Guided Control Valves

D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal

OVALNI ZASUN NP 10-16

procesna oprema OVALNI ZASUN NP 10-16 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 1000 ISO PN10/16 flanges - 10 C + 110 C with EPDM wedge Max Pressure : 16 Bars up to DN400, 10 bars over

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I.

0 SERIES Working pressure 60 bar Style S Style D.I. D.I. Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon Pressure Working pressure: 60 bar (6 MPa)

SERIES LMP 210. Working pressure 60 bar. Style B. Style S D.I. D.I.

0 SERIES Working pressure 60 bar Style S Style D.I. D.I. Technical data Filter housing (Materials) Head: nodised luminium Housing: nodised luminium ypass valve: Nylon Pressure Working pressure: 60 bar

Process Inline Filter, Change-Over

Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.

Bulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators

Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...

Materials : Carbon steel or Stainless steel

Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class

HEAVY DUTY BEVEL GEARBOX MODEL SB-V

FEATURES AND BENEFITS The SB-V series is suitable for use with Globe, Sluice and Knife Gate type valves and any other type requiring linear motion for thrust and torque applications Unique Top Entry replaceable

Style 206 Product Specification

Style 206 Product Specification 1.0 Application The Style 206 is used in rigid piping systems to compensate for axial, lateral, torsional and angular movement and misalignment due to thermal expansion

S P E C I A L S T E E L S

S P E C I A L S T E E L S Index Free Cutting Steel 2M07 ( ENA) Page 2 Bright Mild Steel 070M ( ENA) Page 4 Carbon Axle Steel 0M ( EN8) Page 6 Carbon Steel 070M ( EN9) Page 8 % Chromium Molybdenum Steel

Emission Line

Emission Line 1.110.01 Heated Probe Main Characteristics:. Probe body in AISI 316. Internal suction tube easy to change and available in inox, glass, titan, and quartz.. Total isolation of heating element

Short Stroke Cylinders ISO Bores from 12 to 100 mm

Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic

Certificate of Compliance

Certificate of Compliance Certificate: 1731876 (078713_0_000) Issued to: Hawke International A Division of Hubbell Limited Oxford St W Ashton-Under-Lyne, Lancashire OL7 0NA UNITED KINGDOM Attention: Andy

Cast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE

Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za

Stainless Steel Seamless Tubing and Tube Support Systems

www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked

Kerotest/Marsh Needle Valves Series N

Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.

Kerotest/Marsh Needle Valves Series N

Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.