M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
|
|
|
- Charity Chandler
- 6 years ago
- Views:
Transcription
1 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright 2016 TI-P ST Issue 4 M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard. They are designed to be isolating valves, which can be used with the majority of industrial fluids, not control valves. Available types M21Si2 ISO Zinc plated carbon steel body, PDR 0.8 seats. DN15 to DN50 M21Si3 ISO M21Vi2 ISO M21Vi3 ISO Stainless steel body, PDR 0.8 seats. Zinc plated carbon steel body, PTFE seats. Stainless steel body, PTFE seats. Standards These products fully comply with the requirements of the European Pressure Equipment Directive 7 / 23 / EC and carry the mark when so required. Certification These product are available with certification to EN Note: All certification / inspection requirements must be stated at the time of order placement. Sizes and pipe connections DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100 and DN150 Standard flange: EN 102 PN40 Face-to-face dimensions: - DN15 to DN100 according to DIN 3202 F4. - DN25 to DN150 according to BS DN65 Technical data Flow characteristic Port Modified linear Reduced bore Leakage test procedure to ISO 5208 (Rate A) / EN (Rate A) Antistatic device Complies with ISO 7121 and BS 5351 Page 1 of 7
2 Pressure / temperature limits M21Si2 ISO and M21Si3 ISO - PDR 0.8 seats Temperature C M21Vi2 ISO and M21Vi3 ISO - PTFE seats Temperature C Steam saturation curve Pressure bar g Steam saturation curve Pressure bar g The product must not be used in this region. Body design conditions PN40 PMA Maximum allowable pressure M21Si 40 bar 120 C M21Vi 40 bar 120 C TMA Maximum allowable temperature M21Si M21Vi bar g bar g Minimum allowable temperature -2 C PMO Maximum operating pressure for saturated steam service M21Si M21Vi 17.5 bar g 10.0 bar g TMO Maximum operating temperature bar g Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco -2 C PMX Maximum differential pressure is limited to the PMO Designed for a maximum cold hydraulic test pressure of 60 bar g Page 2 of 7
3 DN15 to DN Materials No. Part Material 1 Body 2 Insert M21Si2 ISO and M21Vi2 ISO Zinc plated carbon steel ASTM A216 WCB M21Si3 ISO and M21Vi3 ISO Stainless steel ASTM A351 CF8M M21Si2 ISO and M21Vi2 ISO Zinc plated carbon steel SAE 1040 M21Si3 ISO and M21Vi3 ISO Stainless steel AISI Ball Stainless steel AISI Stem Stainless steel AISI Seat M21Si2 ISO and M21Si3 ISO Carbon and graphite reinforced PTFE PDR 0.8 M21Vi2 ISO and M21Vi3 ISO Virgin PTFE 6 Insert 'O' ring EPDM Geothermal Stem seal Antistatic R-PTFE 10 Stem seal Stainless steel AISI Separator Zinc plated carbon steel SAE Belleville washer Stainless steel AISI Gland nut Zinc plated carbon steel SAE 1010 / SAE 12L14 16 Upper steam nut Zinc plated carbon steel SAE 1010 / SAE 12L14 17 Locking plate Stainless steel AISI Nameplate Stainless steel AISI Lever Zinc plated carbon steel SAE Grip Vinyl 25 Stop screw Zinc plated carbon steel SAE 12L14 26 Split lock washer Stainless steel AISI 304 Page 3 of 7
4 DN DN80 to DN DN65 to DN Materials No. Part Material 1 Body M21Si2 ISO and M21Vi2 ISO Zinc plated carbon steel ASTM A216 WCB M21Si3 ISO and M21Vi3 ISO Stainless steel ASTM A351 CF8M 2 Insert M21Si2 ISO and M21Vi2 ISO Zinc plated carbon steel SAE 1040 M21Si3 ISO and M21Vi3 ISO Stainless steel AISI Ball Stainless steel AISI Stem Stainless steel AISI 316 / AISI Seat M21Si2 ISO and M21Si3 ISO Carbon and graphite reinforced PTFE PDR 0.8 M21Vi2 ISO and M21Vi3 ISO Virgin PTFE 6 Insert 'O' ring EPDM Geothermal 7 Seat 'O' ring EPDM Geothermal 8 Stem 'O' ring EPDM Geothermal 11 Lower stem seal Antistatic R-PTFE 12 Upper stem packing Virgin PTFE 13 Separator Zinc plated carbon steel SAE Belleville washer Carbon steel/stainless steel 15 Gland nut Zinc plated carbon steel SAE 1010 / SAE 12L14 17 Locking plate Stainless steel AISI Nameplate Stainless steel AISI Stop plate with indicator DN65 only Zinc plated carbon steel SAE Lever Zinc plated carbon steel SAE Grip Vinyl 22 Adaptor Zinc plated SG iron 23 Adaptor plate Zinc plated carbon steel SAE Adaptor with indicator DN80 to DN150 Zinc plated SG iron 25 Stop screw DN80 to DN150 Zinc plated carbon steel SAE 12L14 27 Adaptor screw Zinc plated carbon steel Grade 5 28 Stop screw DN80 to DN150 Carbon steel 2 Adaptor hex. nut DN80 to DN150 Zinc plated carbon steel 31 Antistatic device ball Stainless steel AISI Antistatic device spring Stainless steel AISI 301 Page 4 of 7
5 Dimensions/weights (approximate) in mm and kg PN40 DIN 3202 F4 flanges Size A B C D E F Weight DN DN DN DN DN DN DN DN DN DN PN40 BS 2080 flanges Size A B C D E F Weight DN DN DN DN DN DN DN DN DN DN B C B C E E ØD ØF Ød ØF DN15 to DN50 DN65 to DN150 Kv values DN Kv For conversion Cv (UK) = Kv x 0.63 Cv (US) = Kv x Operating torque (N m) DN N m Note: The torque figures shown are for a valve that is frequently operated at the maximum operating pressure. Valves that are subject to long static periods, may require a greater break-out torque. Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions supplied with the product. Welding Only the models that have connections designed for welding (SW, BW, Imperial Tube connections) should be welded. Valves with flanged connections must not be welded to avoid damages to the valve and/or injury to personnel. How to order Specify a Model Material Seat material Body material S = Carbon and graphite reinforced PTFE - PDR 0.8 V = Virgin PTFE 2 = Zinc plated carbon steel 3 = Stainless steel Example: 1 off Spirax Sarco DN50 M21Si2 ISO ball valve having flanged EN 102 PN40 connections. Optional extras: - Self-venting ball. - Extended stems to allow full insulation: 50 mm (2") for DN15 to DN50 sizes and 100 mm (4") for DN15 to DN150 sizes. - Lockable handle mm extended stem with lockable handle. a Page 5 of 7
6 DN15 to DN50 - Spare parts (see page 7 for sizes DN65 - DN150) The spare parts available are shown in solid outline. Parts drawn in a grey line are not supplied as spares. Available spares Seats, insert 'O' ring and stem seals 5, 6,, 10 How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the size and type of ball valve. Example: 1 set of seats, insert 'O' ring and stem seals for a Spirax Sarco DN50 flanged PN40 M21Si2 ball valve. 10 DN15 to DN Page 6 of 7
7 DN65 to DN150 - Spare parts (see page 6 for sizes DN15 - DN50) The spare parts available are shown in solid outline. Parts drawn in grey line are not supplied as spares. Available spares Seats, insert 'O' ring, seat 'O' ring, stem 'O' ring, lower stem seals and upper stem packing 5, 6, 7, 8, 11, 12 How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the size and type of ball valve. Example: 1 set of seats, insert 'O' ring, seat 'O' ring, stem 'O' ring, lower stem seals and upper stem packaging for a Spirax Sarco DN80 flanged PN40 M21Si2 ball valve DN65 to DN Page 7 of 7
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
M33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M15 ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
BSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
TDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
PN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Description. Edition
WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various medium like liquids, pulps and
13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
Carbon steel or Stainless steel
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
Ball Float Steam Trap UNA 45, UNA 46, UNA 46A PN 40/Class 300 DN 15, 20, 25, 40, 50, 65
Data Sheet 819345-02 Issue Date: 06/16 all Float Steam Trap UNA 45, UNA 46, UNA 46A PN 40/Class 300, 20, 25, 40, 50, 65 UNA 45 hl, UNA 46 hl, UNA 46A hl UNA 45 hl UNA 45 hl Description Float traps type
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
Worcester Controls Series 94, , and The High-Performance Solution for Fugitive Emission, Toxic Gas or High-Cycle Applications
FCD WCABR023-00 (Part PB 94-3) Mass Emission Qualified by Independent Laboratory to EPA Testing Procedures (See Page 2) An ISO 900 Registered Company Series 94, 94-50, 94-300 and 94-600 The High-Performance
Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
KLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA FEATURES GENERAL APPLICATIONS
TECHNICAL DATA Nominal diameter: DN 50 - DN 1200 Metallically up to DN 800 max. PN 16 Face-to-face: EN 558 Series 20, optional Series 25 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092
Certification for Gas EN Certification EN EN Hygienic Certification
ISO 900-200 Certification Brandoni S.p.A. - Italy ISO 900-200 Certification Brandoni Qian An Valves Co. Ltd. Certification Brandoni S.p.A. Industrial valves has been one of the first companies in the Valsesia
Ultra-Seal Ball Valves Series 300
A range of two piece full bore, flanged, free floating (seat supported) ball valves, incorporating mounting dimensions to BS EN 15081, featuring soft, metal and carbon seated designs. Features Two piece
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
Materials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry
Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES
DOUBLE OFFSET BUTTERFLY VALVES SERIES 2E 5
ABsOlute flow control DN 50 - DN 500 (2-20 ) - 100 C + 500 C // Oil & Gas // Power Generation // Petrochemical Industry DOUBLE OFFSET BUTTERFLY VALVES SERIES 2E 5 WWW.ABOVALVE.COM GENERAL INFORMATION -
RHINO VALVES WORLDWIDE. Cryogenic C44/C600 CRYOGENICS
RHINO VALVES WORLDWIDE Cryogenic C44/C600 CRYOGENICS Based on the Series 44, this valve has an extended stem to move away the drops cryogenic temperatures of the operator (human or automatic). This valve
Bolted Two Piece Carbon Steel and Stainless Steel FLOATING BALL VALVE
Bolted Two Piece Carbon Steel and Stainless Steel FOATING BA VAVE Floating Valve Features: Bolted -Piece Construction Cast Steel 50 & 00 Forged Steel 00 to 500 Fire safe SS trim/cs ENP All valves NACE
MV en /7 MV Knife gate valve DN
1/7 The Stafsjö knife gate valve is a valve designed for a wide range of process industry applications. Its main applications are fluids and suspensions up to 5%. It is also used in services with sludge,
88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
SV SERIES 2-PIECE V PORT CONTROL VALVES
SV SERIES 2-PIECE V PORT CONTROL VALVES Split Body metal seated control valves for industrial and process applications. Design Pressure Rating 150# Available in Sizes ½ to 12 300# Available in Sizes ½
M Series 3-PC High Performance Metal Seat Ball Valve
M Series 3-PC High Performance Metal Seat Ball Valve 1 M Series 3-PC High Performance Metal Seat Ball Valve Full Bore TH/SW/BW/Flanged Ends Class 600LB The A-T Controls M Series metal seat ball valve is
Product data sheet Dynaxe - L162GD Valves High Performance - Double Excentric Dynaxe L162
DESIGN Body Flangeless wafer type (lugged) End Connection EN 1092 PN 25, 40 ASME B16.5 cl. 300 / B16.47 cl. 300 MSS SP 44 cl. 300 Face to Face EN558-1/2 Series 16 Disc Seat Replaceable Shaft Seal Design
Fully Welded Ball Valves
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. Fully Welded Ball Valves Type 8 & VALVITALIA GROUP VALVITALIA is an Italian Group of valves and other energy equipment manufacturers
SIGHT GLASS MODEL: BV 91
SIGHT GLASS MODEL: BV 91 ISO 02 SGS/EQCI colour of product throughtout process INDICATION Flow indication is the most common application. The sight glass is fitted in a fluid pipe line to indicate if the
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
Triple offset valve with metallic seat for High performance. Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1783/4--EN Triple offset valve with metallic seat for High performance Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN 12516 and ASME B16-34 Applications LNG process
82-200/82A-240 Series
82-200/82A-240 Series Bronze 3-Piece Full Port Ball Valve Solder End, 82-200 & 82-240: 600 psig. CWP, 150 psig. SWP. 82A-240: 400 psig. CWP, 150 psig. SWP Vacuum Service to 29 inches Hg. Federal Specification:
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
NEOTECHA NXR PFA LINED BALL VALVES
These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,
Swing Check Valve. Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508
Swing Check Valve PN16/PN25/Class125/Class250 Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508 Size 50 to 600 working pressure PN16/Class125. Size 50 to 300 working pressure is
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
Worcester 5 Series. BS 5351 Approved Flanged Ball Valves
Worcester 5 Series S 5351 pproved Flanged all Valves Flowserve Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15 - sizes of the proven Series
Not Just Tight Shut Off Very Tight Shut Off!
APV-LLK-2 DELATITE VALVES Not Just Tight Shut Off Very Tight Shut Off! The Latest Technology in Severe Service Ball Valves Zero Leakage High Pressure High Temperature Metal Seated Repairable Model APV-LLK-2
WOUTER WITZEL EUROVALVE. Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve
Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve 2 WOUTER WITZEL EUROVALVE Dynaxe sets the new standard for double-offset butterfly valves. It is the
KLINGER BALLOSTAR KHA
KLINGER BALLOSTAR KHA - DN 0-50 www.klinger-schoeneberg.de trusted. worldwide. MF 0 CONSISTENTLY MODULAR One product many applications PRODUCT ADVANTAGES Maintenance-free Supports pressurization on both
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
SERIES 19 Segmented Ball Valves. Size Range: 1-12 Carbon Steel, Stainless Steel, Optional Special Alloys ASME Classes 150, 300 & 600
SERIES 19 Segmented Ball Valves Size Range: 1 - Carbon Steel, Stainless Steel, Optional Special Alloys ASME Classes 15, 3 & Flow-Tek Series 19 is a versatile Segmented Ball Valve designed for throttling
C-BV-0812 Catalog C-BV-0812 A h e A d O f t h e f l O w B a l l Va l v e s
catalog C-bV-0812 ahead of the flow Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
Cast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE
Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za
CAST IRON NON-RETURN VALVE SWING TYPE (Reflux Valve)
about us With the "COMMITMENT TO EXCELLENCE" drive, NVR is becoming a foremost name in bronze, brass, cast iron, cast seel and forged steel valves for domestic and industrial applications. Having the most
C-BV-0413 Catalog C-BV-0413 A h e A d O f t h e f l O w B a l l Va l v e s
catalog C-bV-0413 ahead of the flow Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
76-AR series. Stainless Steel Std. Port Ball Valve with Actuator Ready ISO Mounting Pad
76-AR series Stainless Steel Std. Port Ball Valve with Actuator Ready ISO Mounting Pad Female NPT Thread, 1/4-1 2000 CWP (psig), 1.25-2 1500 CWP (psig), 2.5-3 1000 CWP (psig). Cold Non-Shock. 250 psig
special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft
ISI Marked Class-A & Class-B Water Meters as per IS: 779 / 1994 Conforming to ISO 4064 Standard for Cold Water Meters
Product Range ISI Marked Class-A & Class-B Water Meters as per IS: 779 / 1994 Conforming to ISO 4064 Standard for Cold Water Meters Electromagnetic flow meters for water & waste water applications IBR
Ball Float Steam Trap UNA 38, PN 100/CL 600, DN UNA 39, PN 160/CL 900/CL 1500, DN 15-50
Data Sheet 88620-0 Issue Date: 0/7 Ball Float Steam Trap, PN 00/CL 600, DN 5-50, PN 60/CL 900/CL 500, DN 5-50 h Rear view Description UNA 3.. are steam traps with ball float and needle valve for high-pressure
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
NPS ½ - 4 DN ASME Limited Class 1700, 3100, 4500 Severe Service Metal Seated Ball Valves
M4 NPS ½ - 4 DN 15-100 ASME Limited Class 1700, 3100, 4500 Severe Service Metal Seated Ball Valves M4 Redefining isolation through continuous innovations Severe-Tek is Flow-Tek s High Performance Severe
seamless, double walled, made of , option: Hastelloy and other materials Heating jacket (option)
General Data Series 6N Nominal Size DN / -500 / 6 20 Nominal Pressure PN / ANSI 10-40 / Class - Characteristics equal percentage or Rangeability 40:1 guide stem guided, option: double guiding (retrofit
FLANGED END BALL VALVE
Specification: - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material providing maximum
Series. Carbon Steel Ball Valve 1/4-1
A-28 89-100 Series Carbon Steel Ball Valve 1/4-1 NPT Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification:
87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
Fasani Pressure Seal Cast gate Valves - Style B WEDGE GATE
A wide range of gate valves specifically designed for high pressure and high temperature applications. Features GENERAL APPLICATION Our pressure seal gate valves are recommended for a large variety of
Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1
76K-100-A SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
3.3 HP 111- E HIGH-PERFORMANCE BUTTERFLY VALVE HP 111- E TECHNICAL DATA
Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request
BALL VALVES RS-WOG type
SC FEPA SA BARLAD BALL VALVES RS-WOG type APPLICATIONS Designed and prepared for use in the underground or above-ground pipeline systems which convey water, oil, natural gas, neutral or potentially corrosive
Process Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
FLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
3.3 HP 111- E HIGH-PERFORMANCE BUTTERFLY VALVE HP 111- E. TECHNICAL DATA
HIGH-PERFORMANCE BUTTERFY VAVE HP 111- E Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:
LUNKENHEIMER FIGURE K4050 INLINE Y-BODY DN ASME CLASS 150
DN 50-500 ASME CLASS 150 The K4050 inline Y-body isolation valve is specially designed for severe service in alumina and mining applications where scale and erosion are present. FEATURES GENERAL APPLICATION
series. Stainless Steel Ball Valve with Spring Return Handle
76-500 series Stainless Steel Ball Valve with Spring Return Handle Female NPT Thread, 1/4 to 1 2000 CWP (psig), 1.25 to 2 1500 CWP (psig). Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN
ON-OFF free flow valves Series MVMFL/BW
Series MVMFL/BW Technical data Size () Rating Connections Plug characteristic Action Temperature 15-25 PN 16 Butt weld (BW) Parabolic linear Manual handwheel from -30 to +150 C Description Manual micro-valve
C-BV-0918 AHEAD OF THE FLOW. Ball Valves
C-BV-0918 AHEAD OF THE FLOW Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously
Hazardous Chemical Valves. Eurochlor Approved Bellows Seal Manual Isolation Valves Series 8800 & 8801 Sizes 1 to 6 PN40 / ANSI 300 To GEST 06/318
Eurochlor Approved Bellows Seal Manual Isolation Valves Series 8800 & 8801 Sizes 1 to 6 PN40 / ANSI 300 To GEST 06/318 Control & Actuated Valves for Chlorine 1 Manual Bellows Seal Isolation ValvesSeries
METAL SEATED GATE VALVE
BEI JI NG JOI NTFLOW SYSTEM CO. Gat eval ve FEATURE Solid wedge gate valves are the perfect solution as a closing device in pipeline systems. Because of the straight bore all impurities can pass through
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
Cryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
A. This Section includes the following general-duty valves: 1. Division 15 Section "Mechanical Identification" for valve tags and charts.
D-9 OUTLINE SPECIFICATION FOR HTHW VALVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification