ATI Flat Rolled Products Holdings LLC. Heat Treating
|
|
- Kelly Dickerson
- 5 years ago
- Views:
Transcription
1 This certificate is granted and awarded by the authority of the Nadcap Management Council to: 100 River Road Brackenridge, PA United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 30 April 2020 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
2 SCOPE OF ACCREDITATION 100 River Road Brackenridge, PA This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7102 Rev J - Nadcap Audit Criteria for Baseline (AC7102/S and AC7102/8 must also be selected) (to be used on audits on/after 3 December 2017) Nickel and Cobalt Alloys Industry Specs Check any applicable boxes Stainless Steels, Austenitic Industry Specs Check any applicable boxes Stainless Steels, Precipitation Hardening Industry Specs Check any applicable boxes AC7102S Rev G - Nadcap Supplemental Audit Criteria for (to be used on audits before 14 October, 2018) U00 None AC7102/8 - Nadcap Audit Criteria for Pyrometry Pyrometry Customer Specs Pyrometry Industry Specs Check any applicable boxes AMS2750 t-frm Jun-10
3 This certificate is granted and awarded by the authority of the Nadcap Management Council to: 1357 E Rodney French Blvd New Bedford, MA United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 January 2020 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
4 SCOPE OF ACCREDITATION 1357 E Rodney French Blvd New Bedford, MA This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7102 Rev J - Nadcap Audit Criteria for Baseline (AC7102/S and AC7102/8 must also be selected) (to be used on audits on/after 3 December 2017) Nickel and Cobalt Alloys Industry Specs Check any applicable boxes Stainless Steels, Austenitic Industry Specs Check any applicable boxes Stainless Steels, Martensitic Industry Specs Check any applicable boxes Stainless Steels, Precipitation Hardening Industry Specs Check any applicable boxes Steels Industry Specs Check any applicable boxes Titanium Alloys Customer Specs Titanium Alloys Industry Specs Check any applicable boxes AC7102S Rev G - Nadcap Supplemental Audit Criteria for (to be used on audits before 14 October, 2018) U11 The Boeing Company U3 Rolls Royce PLC AC7102/8 - Nadcap Audit Criteria for Pyrometry Pyrometry Customer Specs Pyrometry Industry Specs Check any applicable boxes t frm Jun-10
5
6
7 This certificate is granted and awarded by the authority of the Nadcap Management Council to: 1500 West Main Street Louisville, OH United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 July 2020 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
8 SCOPE OF ACCREDITATION 1500 West Main Street Louisville, OH This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7102 Rev J - Nadcap Audit Criteria for Baseline (AC7102/S and AC7102/8 must also be selected) (to be used on audits on/after 3 December 2017) Nickel and Cobalt Alloys Industry Specs Check any applicable boxes Stainless Steels, Austenitic Industry Specs Check any applicable boxes Stainless Steels, Martensitic Industry Specs Check any applicable boxes Stainless Steels, Precipitation Hardening Industry Specs Check any applicable boxes Titanium Alloys Industry Specs Check any applicable boxes AC7102S Rev G - Nadcap Supplemental Audit Criteria for (to be used on audits before 14 October, 2018) U11 The Boeing Company AC7102/8 - Nadcap Audit Criteria for Pyrometry Pyrometry Industry Specs Check any applicable boxes AMS2750 t frm Jun-10
9 This certificate is granted and awarded by the authority of the Nadcap Management Council to: 500 Green Street Washington, PA United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 July 2020 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
10 SCOPE OF ACCREDITATION 500 Green Street Washington, PA This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7102 Rev J - Nadcap Audit Criteria for Baseline (AC7102/S and AC7102/8 must also be selected) (to be used on audits on/after 3 December 2017) Nickel and Cobalt Alloys Industry Specs Check any applicable boxes Nickel and Cobalt Alloys Customer Specs Stainless Steels, Austenitic Industry Specs Check any applicable boxes Stainless Steels, Martensitic Industry Specs Check any applicable boxes Stainless Steels, Precipitation Hardening Industry Specs Check any applicable boxes Steels Industry Specs Check any applicable boxes Titanium Alloys Industry Specs Check any applicable boxes AC7102S Rev H - Nadcap Supplemental Audit Criteria for (to be used on audits on after 14 October 2018) U11 The Boeing Company AC7102/8 - Nadcap Audit Criteria for Pyrometry Pyrometry Customer Specs Pyrometry Industry Specs Check any applicable boxes AMS2750 t frm Jun-10
ATI Flat Rolled Products Holdings LLC. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 100 River Road Brackenridge, PA 15014 United States This certificate demonstrates conformance and recognition
More informationATI Flat Rolled Products Holdings LLC. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 100 River Road Brackenridge, PA 15014 United States This certificate demonstrates conformance and recognition
More informationAllegheny Ludlum, LLC d/b/a ATI Flat Rolled Products. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 100 River Road Brackenridge, PA 15014 United States This certificate demonstrates conformance and recognition
More informationATI Flat Rolled Products Holdings LLC. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 100 River Road Brackenridge, PA 15014 United States This certificate demonstrates conformance and recognition
More informationCertified Steel Treating Corp. Aerospace Quality System (AC7004)
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: United
More informationAluminum Precision Products Inc. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 528 E. Alton St Santa Ana, CA 92707 United States This certificate demonstrates conformance and recognition
More informationAluminum Precision Products Inc. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 2621 S Susan St Santa Ana, CA 92704-5898 United States This certificate demonstrates conformance and recognition
More informationSenior Aerospace SSP. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 2980 N. San Fernando Blvd United States This certificate demonstrates conformance and recognition of accreditation
More informationSenior Aerospace SSP. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 2980 N. San Fernando Blvd United States This certificate demonstrates conformance and recognition of accreditation
More informationAluminum Precision Products Inc. Heat Treating
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 3333 W Warner Ave Santa Ana, CA 92704-5316 United States This certificate demonstrates conformance and recognition
More informationAllegheny Ludlum, LLC d/b/a ATI Flat Rolled Products. Materials Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 100 River Road Brackenridge, PA 15014 United States This certificate demonstrates conformance and recognition
More informationVac Aero International. Heat Treating
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Vac Aero
More informationThis is to certify that All Metals Processing of Orange County, LLC 8401 Standustrial Street Stanton, CA USA
This is to certify that 8401 Standustrial Street Stanton, CA 90680 USA is registered as a Single Site quality management system in conformance with ISO 9001:2008 and AS9100C The audit was conducted in
More informationAlloyweld Inspection Co. Inc. Aerospace Quality System (AC7004)
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Alloyweld Inspection Co. Inc. 796 Maple Ln Bensenville, IL 60106 United States This certificate demonstrates
More informationHar-Conn Chrome Co. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Har-Conn Chrome Co 603 New Park Ave 06110 United States This certificate demonstrates conformance and recognition
More informationAlloyweld Inspection Co Inc. Aerospace Quality System (AC7004)
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Alloyweld Inspection Co Inc 840 CHURCH ROAD Elgin, IL 60106 United States This certificate demonstrates conformance
More informationMagnetic Inspection Laboratory Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Magnetic Inspection Laboratory Inc. 1401 Greenleaf Avenue Elk Grove Village, IL 60007-5522 United States This
More informationAlloyweld Inspection Co. Inc. Aerospace Quality System (AC7004)
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Alloyweld Inspection Co. Inc. 796 Maple Ln Bensenville, IL 60106 United States This certificate demonstrates
More informationBarry Avenue Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Barry Avenue Plating Inc 2210 Barry Ave 90064 United States This certificate demonstrates conformance and recognition
More informationDirats Laboratories. Materials Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Dirats Laboratories 41 Airport Rd 01086-0039 United States This certificate demonstrates conformance and recognition
More informationSCOPE OF ACCREDITATION. NonDestructive Testing. Veridiam Inc Cuyamaca St El Cajon, CA 92020
SCOPE OF ACCREDITATION NonDestructive Testing Veridiam Inc. 1717 Cuyamaca St El Cajon, CA 92020 This certificate expiration is updated based on periodic audits. The current expiration date and scope of
More informationServicios De Control e Inspeccion S.A. NonDestructive Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Servicios De Control e Inspeccion S.A. Ctra. Ajalvir-Torrejon Km.1.8 Ajalvir Madrid, 28864 Spain This certificate
More informationDiamond Chrome Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Diamond Chrome Plating Inc 604 S. Michigan Ave Howell, MI 48844 United States This certificate demonstrates
More informationWestmoreland Mechanical Testing and Research, Inc. Materials Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 221 Westmoreland Drive Youngstown, PA 15696 United States This certificate demonstrates conformance and recognition
More informationServicios De Control e Inspeccion S.A. NonDestructive Testing
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Servicios
More informationIBERIA LINEAS AEREAS DE ESPAÑA SOCIEDAD ANONIMA OPERADORA Dirección Técnica. NonDestructive Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: IBERIA LINEAS AEREAS DE ESPAÑA SOCIEDAD ANONIMA OPERADORA Dirección Técnica A/ Sede central, Aeropuerto de
More informationAUDIT CRITERIA. Superseding AC7116/3 Nadcap AUDIT CRITERIA FOR ELECTRICAL DISCHARGE MACHINING (EDM)
AC7116/3 REV. A 161Thorn Hill Road Warrendale, PA 15086-7527 AUDIT CRITERIA Issued 2002-02 Revised 2006-11 Superseding AC7116/3 Nadcap AUDIT CRITERIA FOR ELECTRICAL DISCHARGE MACHINING (EDM) 1. SCOPE This
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationSHAPING THE AEROSPACE WORKFORCE OF THE FUTURE
SHAPING THE AEROSPACE WORKFORCE OF THE FUTURE CONTENTS * 3 WELCOME * 4 THE INDUSTRY CHALLENGE * 5 WHAT IS EQUALIFIED? * 6 INDUSTRY RECOGNITION * 7 INDUSTRY INVOLVEMENT * 8 BODIES OF KNOWLEDGE & ASSESSMENTS
More informationProgram Introduction. Joseph G.Pinto Chief Operating Officer & Vice President Performance Review Institute. May 18, 2011
Program Introduction Joseph G.Pinto Chief Operating Officer & Vice President Performance Review Institute May 18, 2011 Definition: PRI The Performance Review Institute is a notfor-profit affiliate of SAE
More informationAPI Standards 20H. Heat Treatments Services Batch Type for Equipment Used in the Petroleum and Natural Gas Industries. First Edition, October 2015
Heat Treatments Services Batch Type for Equipment Used in the Petroleum and Natural Gas Industries First Edition, October 2015 Joel Russo, Chairman TechnipFMC 1 This standard specifies requirements for
More informationTraining Options. Interested? Go to or contact us at to learn more or book your place today.
COURSE CATALOG About equalearn equalearn offers professional development programs and managed learning resources to improve the quality of personnel, products and processes through public and onsite courses
More informationISO9001:2008 /AS9100C CERTIFIED APPROVAL LIST
Nadcap AC7101/4 D Material Testing Laboratories - Metallography & Micro AC7102 G AC7102/3 B AC7102/4 B AC7102/5 C Heat Treating Carburizing Nitriding Hardness Testing Boeing (D1-4426) AQS 0.003 Quality
More informationSUPPLIER SURVEY REQUEST
DATE OF REQUEST 05/06/17 SUPPLIER NAME (FULL LEGAL NAME) Element Material SUPPLIER NUMBER 90042327 CLICK HERE FOR FORM INSTRUCTIONS SUPPLIER MANUFACTURING FACILITY ADDRESS TO BE SURVEYED/APPROVED 18100
More informationProcess Specification for the Heat Treatment of Nickel Alloys
Process Specification for the Heat Treatment of Nickel Alloys Engineering Directorate Structural Engineering Division August 2009 National Aeronautics and Space Administration Lyndon B. Johnson Space Center
More informationOriginally presented at ASM International, Materials Solutions, Columbus, Ohio in October 2004 Richard Bolton MEng, AMIChemE, Area 42 Consulting
A User s Perspective 2014 Geoff B Associates This document is the property of the course instructor, prepared by the course instructor for exclusive use in the delivery of technical training programmes.
More informationNadcap Asia Symposium October - November, 2011
Nadcap Asia Symposium 2011 October - November, 2011 1 Today s Presenter MARCEL CUPERMAN Senior Staff Engineer Heat Treating Agenda Nadcap Heat Treating (HT) Task Group Nadcap Audit Preparation The Nadcap
More informationSpecialty Stainless Steel Processes
Specialty Stainless Steel Processes Bodycote The partner of choice What you need. Exactly. Bodycote offers a complete portfolio of treatment services Heat Treatment, Surface Technology and Hot Isostatic
More informationThe purpose of this procedure is to define internal audit activities of PRI s administration of the Industry Managed Accreditation Programs.
INTERNAL AUDIT Page 1 of 5 1.0 PURPOSE 2.0 SCOPE The purpose of this procedure is to define internal audit activities of PRI s administration of the Industry Managed Accreditation Programs. This procedure
More informationRemedies for Supply Chain Headaches: Innovating Critical Process Manufacturing Oversight. March 23, 2016
Remedies for Supply Chain Headaches: Innovating Critical Process Manufacturing Oversight March 23, 2016 Agenda Poor Critical Process Supply Chain Management Presents Problems for Medical Device Companies
More informationSupplier Quality Requirements
Page 1 of 5 SQR-01 Quality Management Systems AS9100 Suppliers: The supplier will at a minimum maintain and implement a documented quality management system, available in the English language, which is
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationService Steel Aerospace- Massillon 175 Wetmore S. E. Massillon, OH (US & Canada) fax
To whom it may concern, Your request for a supplier survey has been received by Service Steel Aerospace. Due to the high volume of requests, Service Steel is furnishing the following information in lieu
More informationosprey metal powders PRODUCT RANGE TECHNICAL SPECIFICATION
osprey metal powders PRODUCT RANGE TECHNICAL SPECIFICATION OVERVIEW OF OUR METAL POWDERS The following document contains details of the various Osprey alloy families manufactured by Sandvik. These include
More informationSpecialty Stainless Steel Processes
Specialty Stainless Steel Processes Bodycote The partner of choice What you need. Exactly. Bodycote offers a complete portfolio of treatment services Heat Treatment, Surface Technology and Hot Isostatic
More informationProgram Document CPBOK
161Thorn Hill Road Warrendale, PA 15086-7527 Program Document CPBOK PD 6103 CPBoK-002/OP-1 REV. A Issued: 20-DEC-13 Revised: 06-MAR-17 Superseding: 20-DEC-13 BODY OF KNOWLEDGE: ROLE DESCRIPTION: ETCH INSPECTOR
More informationI hope you continue to find the content valuable. Joseph G. Pinto Executive Vice President & Chief Operating Officer Performance Review Institute
MARCH 2017 NADCAP NEWSLETTER WELCOME TO THE SIXTH ISSUE CONTENTS 1 Internal Auditing 5 Nadcap Composites Audit Insight 11 Agreements between Task Groups 12 Using the resource information in eaudinet 15
More informationProgram Document WLDBOK
161Thorn Hill Road Warrendale, PA 15086-7527 Program Document WLDBOK BODY OF KNOWLEDGE: PD 6103 WLDBoK-001/PL-2 REV. N/A Issued: 18 April 2016 Revised: NA Superseding: NA ROLE DESCRIPTION: RESISTANCE SPOT
More information1050 Day Hill Road Windsor, Connecticut Telephone (860) Fax (860) SUPPLIER SURVEY DATE OF SURVEY TYPE OF SURVEY
1050 Day Hill Road Windsor, Connecticut 06095-4728 Telephone (860) 688-0888 Fax (860) 285-8514 SUPPLIER SURVEY DATE OF SURVEY TYPE OF SURVEY POTENTIAL SUPPLIER INITIAL SURVEY ON-SITE EXISTING SUPPLIER
More informationCorrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries
Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries API SPECIFICATION 20F FIRST EDITION, XXX 201X 1 1. Scope 1.1 Purpose This API specification specifies requirements for the
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationHigh strength low alloy (HSLA).
7 Alloy Steels High strength low alloy (HSLA). a type of steel alloy that provides many benefits over regular steel alloys contain a very small percentage of carbon (less than one-tenth of a percent) and
More informationJoin India s First Indigenous Investment Casting foundry exclusively for Aerospace, Defence & Medical application
Join India s First Indigenous Investment Casting foundry exclusively for Aerospace, Defence & Medical application Aerospace Defense Medical A World Class Investment Casting Foundry AS9100 Certified Investment
More informationATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION
ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening
More informationSCOPE OF ACCREDITATION TO ISO GUIDE LECO CORPORATION 3000 Lakeview Avenue St. Joseph, MI Mr. Dennis Lawrenz Phone:
SCOPE OF ACCREDITATION TO ISO GUIDE 34-2009 LECO CORPORATION 3000 Lakeview Avenue St. Joseph, MI 49085 Mr. Dennis Lawrenz Phone: 269 982 2277 REFERENCE MATERIAL PRODUCER Valid To: May 31, 2018 Certificate
More informationRITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
More informationSTAINLESS STEELS. Experience has shown that, at least for stainless. for Corrosion Resistance
STAINLESS STEELS for Corrosion Resistance Newly developed stainless steels provide increased corrosion resistance, improved mechanical properties, easier forming and fabrication, and/or improved economy.
More informationStandard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1
Designation: A 69 06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1 This standard is issued under the fixed designation A 69; the number
More informationPeenability of Steel Components
academic study by Prof. Dr. David Kirk Coventry University, U.K. Peenability of Steel Components INTRODUCTION Component designers can assess whether or not their components have the capability for service
More informationMetal Roof Certification & Listing Program
145 Limekiln Road, Suite 100B Issue Dated: 11/29/2017 New Cumberland, PA 17070 Revision Date: 12/07/2017 www.keystonecerts.com Expiration Date: 11/29/2022 Construction Specifications Institute (CSI) Category:
More informationAs featured in the January/February 2017 issue of Thermal Processing magazine
As featured in the January/February 2017 issue of Thermal Processing magazine Figure 1: The mechanism of quenching of oil: (a) The moment of immersion showing the presence of a vapor film around the component;
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5659L Issued SEP 1965 Revised JAN 2004 Superseding AMS 5659K Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu
More informationGlobal Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical
Global Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical Our pedigree Maher supplies advanced alloys for high performance applications. Founded in Sheffield
More informationAlTiN Coated. UN Thread Internal & External. Length. # of Flutes
UN Thread UN Thread Internal & External 2-56.065.125 2 3 1/8 RM20099 4-40.085.180 2 3 1/8 RM20100 6-32.100.218 2 3 1/8 RM20101 8-32.115.250 2 3 1/8 RM20103 8-36.115.250 2 3 1/8 RM20105 10-24.120.312 2
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS
2007 SECTION II, PART A SA-479/SA-479M SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS SA-479/SA-479M (Identical with ASTM Specification A 479/A 479M-04
More informationStandard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1
Designation: A69 06 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 1 This standard is issued under the fixed designation A69; the number immediately
More informationExceptional Turnaround From A Proven Partner in Materials Testing
www.pes-testing.com MECHANICAL TESTING METALLURGICAL ANALYSIS CHEMICAL ANALYSIS NON-DESTRUCTIVE TESTING FAILURE ANALYSIS CONSULTING Exceptional Turnaround From A Proven Partner in Materials Testing About
More informationMIL-HDBK-5H 1 December 1998
The high-alloy steels in this section are those steels that are substantially higher in alloy content than the intermediate alloy steels described in Section 2.4 but are not stainless steels. The 18 Ni
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 2759/3D Issued OCT 1984 Revised FEB 2005 Superseding AMS 2759/3C Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts 1. SCOPE: This specification,
More informationNadcap Measurement & Inspection Newsletter
Nadcap Measurement & Inspection Newsletter June 2014 Issue Highlights From the Chair...1 Nadcap Meeting Schedule...2 M&I Development...3 What is M&I...3 Why M&I...3 M&I Task Group...3 Checklist Structure...4
More informationDownloaded from Process Specification for the Heat Treatment of Aluminum Alloys
Process Specification for the Heat Treatment of Aluminum Alloys Engineering Directorate Structural Engineering Division August 2009 National Aeronautics and Space Administration Lyndon B. Johnson Space
More informationNADCAP NEWSLETTER Nadcap: 25 Years of Excellence
SEPTEMBER 2015 NADCAP NEWSLETTER WELCOME TO THE inaugural issue COnTEnTS 1 How to successfully pass a Nadcap audit 10 How to address audit findings - nadcap style 12 Nadcap document transition 14 Nadcap
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationIssue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
More informationNadcap A Regulator s View. Dr E H Blacklay 21 March 2017
Nadcap A Regulator s View Dr E H Blacklay 21 March 2017 1 Nadcap Define Nadcap Nadcap Function Nadcap Administration Programme / Process Regulatory Acceptance Regulator s Observations 2 Nadcap Is a worldwide
More informationStainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationI hope you continue to find the content valuable. Joseph G. Pinto Executive Vice President & Chief Operating Officer Performance Review Institute
NOVEMBER 2017 NADCAP NEWSLETTER WELCOME TO THE EIGHTH ISSUE CONTENTS 1 Proprietary Information and Nadcap 3 Nadcap MTL Audit Insight 9 OP 1105 - Audit Process 11 The Role of the Company Administrator in
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: San Nicolás de los Garza, N.L. 66460 (Hereinafter
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
More informationIAEA CERTIFICATE OF COMPETENT AUTHORITY SPECIAL FORM RADIOACTIVE MATERIALS CERTIFICATE USA/0335/S-96, REVISION 13
U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration IAEA CERTIFICATE OF COMPETENT AUTHORITY SPECIAL FORM RADIOACTIVE MATERIALS CERTIFICATE /0335/S-96, REVISION 13 East
More informationEndmills. Variable Index & Helix Endmills at General. Purpose Prices!
Endmills Endmills at General Purpose Prices! Advanced Supply MMT-Productivity Advanced Supply programs offer tool management software and vending solutions with full flexibility to support our customers.
More informationD101 - JOBBER DRILLS - Silver Bullet
D101 - JOBBER DRILLS - Silver Bullet Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
More informationDear Supplier: A Certificate of Conformance certifies that the product being delivered conforms to the following:
Dear Supplier: The following guide has been created to help address any questions regarding our requirements for Certificates of Conformance/Compliance and Materials Certificates. Ideally, either document
More informationIssue February 2018 Valid to December ISO 9001 Registered Quality Management
Issue February 2018 Valid to December 2018 ISO 9001 Registered Quality Management 015 Index February 2018 Page Index Inside front cover Introduction & Abbreviations. 3 Information - Definitions etc. 53
More informationExceptional Turnaround From A Proven Partner in Materials Testing
www.pes-testing.com MECHANICAL TESTING METALLURGICAL ANALYSIS CHEMICAL ANALYSIS NON-DESTRUCTIVE TESTING FAILURE ANALYSIS CONSULTING Exceptional Turnaround From A Proven Partner in Materials Testing About
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
More informationABS Quality Evaluations Certificate Of Conformance
This is to certify that the Quality Management System of: 18 PolyOne Corporate - Avon Lake 18 33587 Walker Road Avon Lake, OH 44012 (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ) has been assessed by,
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationMetal Roof Certification & Listing Program. 1. Program Licensee: This Certification Report was used to qualify Florida Product Approval FL
145 Limekiln Road, Suite 100B Issue Dated: 6/19/2018 New Cumberland, PA 17070 Revision Date: 6/19/2018 www.keystonecerts.com Expiration Date: 6/19/2023 Construction Specifications Institute (CSI) Category:
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationSURFACE VEHICLE STANDARD
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE STANDARD J403 Issued 1911-06 Revised 2001-11 Superseding J403 JUN2000 REV. NOV2001 s of SAE Carbon Steels 1. Scope In 1941, the SAE Iron
More informationNadcap Overview. Nadcap Asia Symposium in Japan Oct31 st- Nov 1 st, 2011
Nadcap Overview Nadcap Asia Symposium in Japan Oct31 st- Nov 1 st, 2011 1 Performance Review Institute (PRI) PRI is a not-for-profit affiliate of SAE International PRI administers the Nadcap special processes
More informationSG DRILL SERIES POWDERED METAL COBALT DRILLS
SG DRILL SERIES POWDERED METAL COBALT DRILLS Contributing to Progress in the World of Product Manufacture The NACHI Difference ~ NACHI-FUJIKOSHI CORP. is a pioneer of precision cutting tools in Japan and
More informationC TRM SPECIAL METALS
SPECIAL METALS C 07-12 000-01- TRM SERVONEER: Well-Tested Metal Welcome to Servoneer, the worldwide, full-service supplier of bulk speciality metals. At Servoneer, we are passionate about our metal supply
More informationPRI/Nadcap 电子简报. Issue Highlights. PRI Joined With KOTRA To Provide Training in South Korea. Nadcap Asia Symposia. PRI Update
PRI Update Issue Highlights PRI Update Nadcap Asia Symposia 1 PRI Joined With KOTRA To Provide Training in South Korea Nadcap Document Transition 2 Welding - Top NCR s 3-4 Nadcap Asia Symposium Q&A 4-6
More informationI hope you continue to find the content valuable. Joseph G. Pinto Executive Vice President & Chief Operating Officer Performance Review Institute
MARCH 2018 NADCAP NEWSLETTER WELCOME TO THE NINTH ISSUE This is the ninth issue of this Nadcap newsletter. PRI has been publishing and sharing this content since September 2015. I would like to thank everyone
More informationStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 1
Designation: A 268/A 268M 0 An American National Standard Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service This standard is issued under
More informationCertification Report.
145 Limekiln Road, Suite 100B Issue Dated: 9/26/2018 New Cumberland, PA 17070 Revision Date: 10/1/2018 www.keystonecerts.com Expiration Date: 9/26/2023 Construction Specifications Institute (CSI) Category:
More informationBearings for Extreme Special Environments-Part 1 Bearing Materials and Solid Lubricants
Bearings for Extreme Special Environments-Part 1 Bearing Materials and Solid Lubricants H. TAKEBAYASHI * *Product Engineering Center, EXSEV Project Office Koyo was the first company to develop and produce
More information