SEZER ÖZERİNÇ EDUCATION RESEARCH INTERESTS ACADEMIC EXPERIENCE
|
|
|
- Alvin Murphy
- 5 years ago
- Views:
Transcription
1 SEZER ÖZERİNÇ, Dumlupınar Blv. No: 1, Çankaya Ankara / TURKEY (0312) ozerinc@metu.edu.tr EDUCATION Ph.D. in Mechanical Engineering August 2015 Thesis title: Microscale Mechanical Characterization of Materials for Extreme Environments Advisor: Prof. William P. King M.S. in Mechanical Engineering June 2010 Thesis title: Heat Transfer Enhancement with Nanofluids Advisor: Assoc. Prof. Almıla Güvenç Yazıcıoğlu Co-advisor: Prof. Sadık Kakaç (TOBB ETÜ) B.S. in Mechanical Engineering June 2008 Ranked first in the class with GPA of 3.99/4.00 RESEARCH INTERESTS Mechanical and microstructural properties of thin films, nanostructured materials and metallic glasses. Development of wear resistant hard coatings. Advanced mechanical characterization through nanoindentation, nanoscratch, micropillar compression, microcantilever bending, high temperature and in situ techniques. Mechanical behavior of 3D-printed materials and structures. ACADEMIC EXPERIENCE Assistant Professor Feb 2016 Assistant Director Mar 2017 Mar 2018 Central Laboratory Lecturer Oct 2015 Jan 2016 Teaching Fellow Jan 2015 May 2015
2 Graduate Research Assistant Aug 2010 Aug 2015 PUBLICATIONS Journal Publications 1. S. Özerinç, R.S. Averback, W.P. King, In situ Measurements of Irradiation-Induced Creep of Nanocrystalline Copper at Elevated Temperatures, JOM, 68, (2016). 2. S. Özerinç, H.J. Kim, R.S. Averback, W.P. King, Direct measurements of irradiation-induced creep in micropillars of amorphous Cu 56Ti 38Ag 6, Zr 52Ni 48, Si and SiO 2, Journal of Applied Physics, 117, (2015). 3. S. Mao, S. Özerinç, W.P. King, R.S. Averback, S.J. Dillon, Effect of irradiation damage on the shear strength of Cu-Nb interfaces, Scripta Materialia 90-91, (2014). 4. S. Özerinç, R.S. Averback, W.P. King, In situ creep measurements on micropillar samples during heavy ion irradiation, Journal of Nuclear Materials 451, (2014). 5. S. Özerinç, K. Tai, N.Q. Vo, P. Bellon, R.S. Averback, W.P. King, Grain boundary doping strengthens nanocrystalline copper alloys, Scripta Materialia 67, (2012). 6. S. Özerinç, A.G. Yazıcıoğlu, S. Kakaç, Numerical analysis of laminar forced convection with temperature-dependent thermal conductivity of nanofluids and thermal dispersion, International Journal of Thermal Sciences 62, (2012). 7. S. Özerinç, S. Kakaç, A.G. Yazıcıoğlu, Enhanced thermal conductivity of nanofluids: A state-ofthe-art review, Microfluidics and Nanofluidics 8, (2010). Book Chapter 1. S. Özerinç, S. Kakaç, A.G. Yazıcıoğlu, Thermophysical Properties of Nanofluids in: Microscale and Nanoscale Heat Transfer Analysis, Design, and Application, eds. M. Rebay, S. Kakaç, R.M. Cotta, CRC Press, Boca Raton (2016). Conference Proceedings 1. A. Alpkaya, A. Motallebzadeh, S. Özerinç, Solid Solution Strengthening in Nanolayered Metals, Proceedings of the 13 th International Nanoscience and Nanotechnology Conference, Antalya, Turkey, 388 (2017). 2. S. Özerinç, S. Mao, K. Tai, N. Vo, P. Bellon, S. Dillon, R.S. Averback, W.P. King, Micromechanical Testing of High Strength Copper-Niobium Nanostructures, Proceedings of the 12th International Nanoscience and Nanotechnology Conference, Kocaeli, Turkey, 119 (2016). 3. J. Pikul, S. Özerinç, R. Zhang, P. Braun, W.P. King, Micro architected porous material with high strength and controllable stiffness, Proceedings of IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), Shanghai, China, (2016). 4. S. Özerinç, A.G. Yazıcıoğlu, S. Kakaç, Convective heat transfer enhancement with nanofluids: The effect of temperature-variable thermal conductivity, Proceedings of the ASME 10th Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Turkey, (2010). SEZER ÖZERİNÇ 2/5
3 PRESENTATIONS 1. M. Abboud, Z. Artvin, A. Motallebzadeh, S. Özerinç, Multilayered Metallic Glass-Crystalline Nanocomposites with Improved Wear Resistance, TMS Annual Meeting & Exhibition, 2018, San 2. S. Özerinç, Invited Talk, Department of Metallurgical and Materials Engineering, İstanbul Technical University, 2018, İstanbul, Turkey. 3. S. Özerinç, N. Verma, R.S. Averback, Strengthening in multilayered Cu-Nb through alloying, MRS Fall Meeting & Exhibit, 2017, Boston, USA. 4. A. Alpkaya, A. Motallebzadeh, S. Özerinç, Solid Solution Strengthening in Nanolayered Metals, 13 th International Nanoscience and Nanotechnology Conference, 2017, Antalya, Turkey. 5. N. Verma, S. Özerinç, S. Kim, R.S. Averback, Effects of Annealing and Heavy Ion Irradiation on the Mechanical Properties of AlSc Alloys, MRS Spring Meeting & Exhibit, 2017, Phoenix, USA. 6. F. Sıkan, İ. Kalay, S. Özerinç, Y.E. Kalay, Effect of Sm Micro-alloying on the mechanical behavior and crystallization kinetics of Cu-Zr-Al BMGs, TMS Annual Meeting & Exhibition, 2017, San 7. S. Özerinç, S. Mao, K. Tai, Nhon Vo, P. Bellon, S. Dillon, R.S. Averback, W.P. King, Micromechanical Testing of High Strength Copper-Niobium Nanostructures, 12 th International Nanoscience and Nanotechnology Conference, 2016, Kocaeli, Turkey. 8. S. Özerinç, Invited Talk, IMDEA Materials Institute, 2016, Madrid, Spain. 9. S. Özerinç, Invited Talk, Department of Metallurgical and Materials Engineering, Middle East Technical University, 2016,. 10. S. Özerinç, R.S. Averback, W.P. King, In Situ Irradiation Induced Creep Measurements on Micropillar Specimens at Elevated Temperatures, TMS Annual Meeting & Exhibition, 2016, Nashville, USA. 11. S. Özerinç, H.J. Kim, R.S. Averback, W.P. King, Measurements of irradiation-induced creep in amorphous materials using in situ micropillar compression, MRS Spring Meeting & Exhibit, 2015, San Francisco, USA. 12. S. Özerinç, Invited Talk,, TOBB-ETÜ University of Economy and Technology, 2014,. 13. S. Özerinç, Invited Talk,, Middle East Technical University, 2014,. 14. S. Özerinç, Invited Talk,, Bilkent University, 2014,. 15. S. Özerinç, R.S. Averback, W.P. King, In situ measurement of heavy-ion-irradiation-induced plastic flow of amorphous CuTiAg micropillars, TMS Annual Meeting & Exhibition, 2014, San 16. S. Özerinç, K. Tai, N.Q. Vo, R.S. Averback, P. Bellon, S. Dillon, W.P. King, Grain boundary strengthening in dilute nanocrystalline Cu alloys, MRS Fall Meeting & Exhibit, 2011, Boston, USA. 17. S. Özerinç, A.G. Yazıcıoğlu, S. Kakaç, Convective heat transfer enhancement with nanofluids: The effect of temperature-variable thermal conductivity, ASME 10th Biennial Conference on Engineering Systems Design and Analysis, 2010, İstanbul, Turkey. SEZER ÖZERİNÇ 3/5
4 PROJECTS TÜBİTAK 3501 (Mar 2017 Sep 2019) Project Title: Investigation of the Mechanical Properties of Nanolayered Metals with Microcompression Testing Budget: TL TÜBİTAK 2232 (Jan 2017 Dec 2018) Project Title: Investigation of the Nanohardness and Yield Strength of Multilayered Nanomaterials Budget: TL METU-BAP Projects Project Title: Development of Wear Resistant Metallic (Jun 2016 Dec 2018) Glass Nanocomposite Coatings Budget: TL Project Title: Development of Nanolayered Metallic Coatings (Jan 2017 Dec 2017) Budget: TL Project Title: Investigation of the Mechanical Properties (Jan 2017 Dec 2018) of Cu-Zr-Al Metallic Glasses Budget: TL Project Title: Investigation of the Mechanical Behavior of (Jan 2017 Dec 2017) Microstructures through Finite Element Analysis Budget: TL HONORS AND AWARDS Marie Sklodowska-Curie Actions Seal of Excellence 2017 TÜBİTAK 2232 Research Fellowship 2016 List of Teachers Ranked as Excellent by their Students, UIUC 2015 UIUC MechSE Alumni Association Teaching Fellow Award 2015 Teaching Fellowship, 2015 TÜBİTAK National Graduate Study Fellowship Ranked first in his class of Mechanical Eng. in Middle East Technical Univ SEZER ÖZERİNÇ 4/5
5 PROFESSIONAL MEMBERSHIPS Journal of Machine Design and Manufacturing Journal (MATİM Journal) Assistant Editor Machine Design and Manufacturing Association (MATİM) Board Member American Society of Mechanical Engineers Materials Research Society The Minerals, Metals and Materials Society SERVICE AND ACTIVITIES Journal Reviewer Appointments Scripta Materialia International Journal of Heat and Mass Transfer Materials Science and Engineering: B Computational Materials Science Journal of Aerospace Engineering Journal of Thermal Science and Technology MATİM Journal Participated Workshops ASELSAN 2 nd Materials Technologies Workshop, 2016, METU Academic Development Program, 2016, Graduate Academy for College Teaching, 2015, 5 th Advanced Materials Characterization Workshop, 2011, NATO Advanced Study Institute on Microsystems for Security Fundamentals & Applications, 2009, Çeşme, Turkey SEZER ÖZERİNÇ 5/5
Assistant Professor Feb Department of Mechanical Engineering Nanomechanics Laboratory Group Leader Assistant Director Mar 2017 Mar 2018
SEZER ÖZERİNÇ, Department of Mechanical Engineering Dumlupınar Blv. No: 1, 06800 Çankaya Ankara / TURKEY +90 312 210 2548 ozerinc@metu.edu.tr EDUCATION Ph.D. in Mechanical Engineering August 2015 Thesis
ZHOU, CAIZHI EDUCATION RESEARCH INTERESTS EXPERIENCE
ZHOU, CAIZHI Couch Assistant Professor of Materials Science & Engineering Department of Materials Science and Engineering Missouri University of Science and Technology B37 McNutt Hall, Rolla, MO 65409-0340
CURRICULUM VITAE MEHMET KAYA
CURRICULUM VITAE MEHMET KAYA OFFICE ADDRESS Material Engineering, Engineering Faculty, Adiyaman University 02040 Adiyaman/Turkey, Tel: +90 416 223 2127-28 Fax: +90 416 223 2129 Email: mehmetkaya75@hotmail.com
A305 Bourns Hall, University of California, Riverside, Riverside Phone: (951)
EDUCATION SANDEEP KUMAR A305 Bourns Hall, University of California, Riverside, Riverside 92521 Phone: (951) 827 5832 E-mail: skumar@engr.ucr.edu 2006-2012 Department of Mechanical & Nuclear Engineering,
RESUME. Céline HIN, Ph.D.
Céline HIN, Ph.D. Virginia Tech 306 Collegiate Square, MC 0238 Department of Materials Science and Engineering Department of Mechanical Engineering Nuclear Engineering Program Blacksburg, VA 24061 Tel:
Imperial College London
Imperial College London John A Kilner BCH Steele Chair in Energy Materials Dept. of Materials, Faculty of Engineering Imperial College, London, UK j.kilner@imperial.ac.uk Imperial College London Imperial
CURRICULUM VITAE. Chang-Qing Huang
CURRICULUM VITAE Chang-Qing Huang Senior Engineer / Associate Professor School of Mechanical and Electrical Engineering State Key Laboratory of High-performance & Complicated Manufacturing of China Rm
A305 Bourns Hall, University of California, Riverside, Riverside Phone: (951)
EDUCATION SANDEEP KUMAR A305 Bourns Hall, University of California, Riverside, Riverside 92521 Phone: (951) 827 5832 E-mail: skumar@engr.ucr.edu 2006-2012 Department of Mechanical & Nuclear Engineering,
Research Article Nanocrystalline Phase Formation inside Shear Bands of Pd-Cu-Si Metallic Glass
Advances in Materials Science and Engineering, Article ID 490181, 4 pages http://dx.doi.org/10.1155/2014/490181 Research Article Nanocrystalline Phase Formation inside Shear Bands of Pd-Cu-Si Metallic
EDUCATION. Page 1 of 5
David L. Johnsen Ph.D. Candidate Air Quality Engineering and Science Group University of Illinois, Department of Civil and Environmental Engineering 4140 Newmark Civil Engineering Laboratory, MC-250 205
G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (G.V. Kurdyumov IMP of NASU), Kyiv
G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (G.V. Kurdyumov IMP of NASU), Kyiv Technical Area: Material Sciences Keywords: metal physics General Information
Bülent Gümüş, Ph.D. +90 (538)
Dr. Bülent GÜMÜŞ has worked in prestigious firms and universities as Assistant Professor, Program Manager, Project Manager, Consultant and Engineer in Turkey, USA and Qatar. He has more than 22 years of
Expertise on following materials: Thanks to the structure of CSNMT, the expertise covers nearly all engineering materials.
NAME: CZECH SOCIETY FOR NEW MATERIALS AND TECHNOLOGIES (CSNMT), PRAHA COUNTRY: CZECH REPUBLIC Profile : The Czech Society for New Materials and Technologies (CSNMT), founded in 1993, is a voluntary association
Engr. Dr. Nafis Ul Haque
Engr. Dr. Nafis Ul Haque Department of Metallurgical Engineering, NED University of Engineering and Technology, University Road, Karachi, 75270 Pakistan, +92 21 99261261-8 ext. 2520, 2405 (Office) Academic
Dr. Abdul Wadood. Current Position. March 26, Continue
Dr. Abdul Wadood Current Position March 26, 2014 - Continue Assistant Professor, Department of Materials Science and Engineering, Institute of Space Technology (IST) Near CDA Toll Plaza Islamabad Pakistan.
JASON GEATHERS. 171 Moultrie Street, Charleston, SC (843) EDUCATION
JASON GEATHERS 171 Moultrie Street, Charleston, SC 29409 +1 (843)-953-9876 jgeather@citadel.edu EDUCATION Doctor of Philosophy in Mechanical Engineering August 2016 Advisors: J. Wayne Jones, Samantha H.
Curriculum Vitae Xinglin Lu
Curriculum Vitae Educational Background Ph.D. 2015. Municipal Engineering, Harbin Institute of Technology. Title of Ph.D. Dissertation: "Mechanisms and Control Strategies of Fouling Propensity and Reverse
Troy A. Hayes, Ph.D., P.E.
Troy A. Hayes, Ph.D., P.E. Principal Engineer Materials & Corrosion Engineering 149 Commonwealth Drive Menlo Park, CA 94025 (650) 688-7127 tel thayes@exponent.com Professional Profile Dr. Hayes has extensive
Fuh-Sheng Shieu, Ph. D. 145 Xingda Road, Taichung 40227, Taiwan Tel: ; Fax:
Fuh-Sheng Shieu, Ph. D. 145 Xingda Road, Taichung 40227, Tel: +886-4-22840201; Fax: +886-4-22853813 E-mail: presid@nchu.edu.tw Current Positions 2015/08~ President, National Chung Hsing University, 2007/08~
Siddhartha (Sid) Pathak
Understanding the Local Structure-Property Relationships of Solders in Terrestrial vs. Microgravity Environments Using Electron Microscopy and Nano-mechanical Testing Siddhartha (Sid) Pathak Assistant
Engineering Materials 2
-951-5- Engineering Materials 2 An Introduction to Microstructures, Processing and Design Third Edition Michael F. Ashby and David R. H. Jones Department of Engineering, Cambridge University, UK ELSEVIER
Creep behavior study of join of nano crystalline Stainless steel and nanocrystalline Nickel using molecular dynamics simulation
Creep behavior study of join of nano crystalline Stainless steel and nanocrystalline Nickel using molecular dynamics simulation Md. Meraj and S. Pal * Computational Material Engineering Group, Department
Length scale and strain rate dependent shear banding deformation in nanoscale Cu/W multilayers
Length scale and strain rate dependent shear banding deformation in nanoscale Cu/W multilayers Yuan Li 1), *Fei Wang 2), Ping Huang 3) and Ke-Wei Xu 4) 1), 3), 4) State-key Laboratory for Mechanical Behavior
NAGINI MACHA. Phone: University of Hyderabad (UOH), Hyderabad Ph.D., Materials Engineering
NAGINI MACHA Email: naginimacha@gmail.com Phone: +91-9951022230 EDUCATIONAL BACKGROUND University of Hyderabad (UOH), Hyderabad 2011-2017 Ph.D., Materials Engineering Jawaharlal Nehru Technological University
Effects of Grain Boundary Disorder on Yield Strength
Materials Science and Engineering Publications Materials Science and Engineering 2018 Effects of Grain Boundary Disorder on Yield Strength Valery Borovikov Iowa State University and Ames Laboratory, valery@ameslab.gov
Change in stoichiometry
Measurement of Gas Sensor Performance Gas sensing materials: 1. Sputtered ZnO film (150 nm (Massachusetts Institute of Technology) 2. Sputtered SnO 2 film (60 nm) (Fraunhofer Institute of Physical Measurement
Revolutionizing the way we design, test and manufacture materials and systems for extreme environments
1 Revolutionizing the way we design, test and manufacture materials and systems for extreme environments Design materials and systems for extreme environments such as ultrahigh temperatures, extreme pressures
Chapter 1 1 CHAPTER 1. INTRODUCTION Historical background and development of bulk metallic glasses
Chapter 1 1 CHAPTER 1. INTRODUCTION 1.1. Historical background and development of bulk metallic glasses Glass is any material that can be cooled from a liquid to a solid without crystallizing. Most metals
THERMAL AND ELASTIC PROPERTIES OF CU-ZR-BE BULK-METALLIC-GLASS FORMING ALLOYS
Chapter 5 THERMAL AND ELASTIC PROPERTIES OF CU-ZR-BE BULK-METALLIC-GLASS FORMING ALLOYS The compositional dependence of thermal and elastic properties of Cu-Zr-Be ternary bulk-metallic-glass forming alloys
Microstructure and Mechanical Behavior of in-situ Ti-TiB whisker Composites
Microstructure and Mechanical Behavior of in-situ Ti-TiB whisker Composites Final Progress Report (ARO Grant # DAAD19-99-1-0281) Dr. K. S. Ravichandran, PI Professor, Department of Metallurgical Engineering
PEER-REVIEWED JOURNAL PUBLICATIONS
EDUCATION Expected 2019 Ph.D. SEMIN PARK School of Business Management Department 2100 Hillside Road, Unit 1041, 06269-1041, U.S.A. Cell: +1(860) 212-9692 semin.park@uconn.edu School of Business, Ph.D.
SERU Structural Engineering Research Unit
SERU Structural Engineering Research Unit Prof. Dr. Mustafa Verşan KÖKK Enginnering Research Group Coordinator FP6 National Contact Point (Energy-Transportation Transportation-Environment) TUBITAK (The
Practicum 01: Instrumentation and an Introduction to Nanoscale Measurement
Practicum 01: Instrumentation and an Introduction to Nanoscale Measurement Objective: Teach the fundamentals of measurement science and the NanoGuru instrumentation Practicum 01 introduces the student
Grain boundary restructuring of sintered Nd-Fe-B magnets Mi Yan
Grain boundary restructuring of sintered Nd-Fe-B magnets Mi Yan Department of Materials Science and Engineering, Zhejiang University, China Beijing A brief introduction (Zhejiang University and our research
TUSHAR BORKAR Edgewater Drive, Apt # 215 Lakewood, Ohio (405)
TUSHAR BORKAR 11800 Edgewater Drive, Apt # 215 T.Borkar@csuohio.edu Lakewood, Ohio-44107 (405) 338-8651 SUMMARY My primary research focus is on advanced metallic and functionally graded composite (or hybrid)
A STUDY OF THE STRUCTURE AND MECHANICAL PROPERTIES OF ORDERED ALLOYS. Final Report
ORO-3908-5 A STUDY OF THE STRUCTURE AND MECHANICAL PROPERTIES OF ORDERED ALLOYS Final Report B. G. LeFevre and E. A. Starke, Jr. Metallurgy Program, School of Chemical Engineering Georgia Institute of
Recent Seminar, Workshop and Training Course by JSSI, 2013 to 2018
Recent Seminar, Workshop and Training Course by JSSI, 2013 to 2018 April, 1-5, 2013 (at Ankara, Turkey) Seminar for seismic isolation and vibration control technology Ministry of Health invited JSSI delegates.
Chulalongkorn University, Bangkok, Thailand. Chulalongkorn University, Bangkok, Thailand; Abstract
Journal of Metals, Materials and Minerals. Vol.16 No.2 pp.25-31, 2006 The Effect of Long-Term Thermal Exposure at Elevated Temperatures on Microstructures and Mechanical Properties in Centrifugally Casted
Chapter 1. Institute of Technology in 1960 [1]. The first metallic glass system, Au 75 Si 25, was found
![Chapter 1. Institute of Technology in 1960 [1]. The first metallic glass system, Au 75 Si 25, was found](/thumbs/96/127272572.jpg "Chapter 1. Institute of Technology in 1960 [1]. The first metallic glass system, Au 75 Si 25, was found")
Chapter 1 Introduction The first metallic glass was reported by Klement and Duwez at the California Institute of Technology in 1960 [1]. The first metallic glass system, Au 75 Si 25, was found during an
Payam Parsa. Conducted a research project with annual savings impact of $700,000
Payam Parsa Ph.D. Candidate Department of Industrial Engineering, University of Arkansas 4207 Bell Engineering Center, 1 University of Arkansas, Fayetteville, AR E-Mail: pparsa@uark.edu Tel: (479) 422
MICROSTRUCTURAL INVESTIGATION OF SPD PROCESSED MATERIALS CASE STUDY
TEQIP Workshop on HRXRD, IIT Kanpur, 05 Feb 2016 MICROSTRUCTURAL INVESTIGATION OF SPD PROCESSED MATERIALS CASE STUDY K.S. Suresh Department of Metallurgical and Materials Engineering Indian Institute of
2 9 & 3 0 J U N E, P A R I S - F R A N C E
2 9 & 3 0 J U N E, 2 0 1 4 P A R I S - F R A N C E HIGH-TECH MATERIALS FOR TOMORROW'S LARGE SCALE INDUSTRIAL DEVELOPMENTS: ENERGY GENERATION AND TRANSPORT, ADVANCED STRUCTURAL DESIGNS, AND DATA PROCESSING
CITIZENSHIP Permanent Resident of United States
Shima Hajimirza, PhD. Texas A&M University College Station, Texas 77843-3123 Phone: 979-845-4280 Email: shima.hm@tamu.edu Research Website: http:/www.ecolab.tamu.edu Google Scholar Profile: Link RESEARCH
Jordan Farina, PhD February 22, 2019
Jordan Farina, PhD February 22, 2019 University of Portland 5000 North Willamette Blvd. Portland, OR 97203 Email: farina@up.edu EDUCATION PhD, Mechanical Engineering, Virginia Polytechnic Institute and
3. Affiliation : Vivekananda Mahavidyalaya, Burdwan
1. Name : DR. HEMA DUTTA 2. Designation : Assistant Professor of Physics 3. Affiliation : Vivekananda Mahavidyalaya, Burdwan 4. Address for correspondence : Vivekananda Mahavidyalaya, Burdwan, P.O. Sripally,
Nano-Structured Alloy and Composite Coatings for High Temperature Applications
Vol. Materials 7, No. Research, 1, 2004 Vol. 7, No. 1, 175-182, Nano-Structured 2004. Alloy and Composite Coatings for High Temperature Applications 2004 175 Nano-Structured Alloy and Composite Coatings
Lab-on-a-chip Channels Novel Manufacturing Method
Lab-on-a-chip Channels Novel Manufacturing Method Alex A. Volinsky, Megan Pendergast, Ramakrishna Gunda University of South Florida, Department of Mechanical Engineering, Tampa, FL 33647, USA. E-mail:volinsky@eng.usf.edu
Effects of Grain Boundary Disorder on Yield Strength
Effects of Grain Boundary Disorder on Yield Strength Valery Borovikov 1, Mikhail I. Mendelev 1 and Alexander H. King 1,2 1 Division of Materials Sciences and Engineering, Ames Laboratory, Ames, IA 50011
Diplomi-insinööri (Master of Science) Tekniikan lisensiaatti (Licentiate of Technology) Tekniikan tohtori (Doctor of Technology)
CURRICULUM VITAE Personal information Last name: First names: Korhonen Antti Samuli Born in Heinola, Finland, July 14, 1950 Citizenship: Finland Parents: Vilho Korhonen and Inkeri Korhonen, born Kiesilä
EYLEM ASMATULU. Ph.D., Department of Industrial and Manufacturing Engineering, Wichita State University (WSU), Wichita, KS, May, 2013
EDUCATION EYLEM ASMATULU Ph.D., Department of Industrial and Manufacturing Engineering, Wichita State University (WSU), Wichita, KS, May, 2013 M.S., Department of Agricultural Engineering, Cukurova University,
Dr. Muhammad Saad Memon
EDUCATION Dr. Muhammad Saad Memon Asst. Professor, Industrial Engineering and Management Mehran University of Engineering and Technology Jamshoro, 76062, Sindh, Pakistan +92 (22) 2772250 Ext: 4708; saad.memon@faculty.muet.edu.pk
Ankit Srivastava Department of Materials Science and Engineering Phone: (979) RDMC 211, 3003 TAMU Fax: (979)
Ankit Srivastava Department of Materials Science and Engineering Phone: (979) 458 9841 RDMC 211, 3003 TAMU Fax: (979) 862 0750 College Station, TX 77843-3003 Email: ankit.sri@tamu.edu Professional Experience
Program and Abstracts
15 th Materials Science School for Young Scientists (KINKEN WAKATE 2018) & Symposium of 30 th Anniversary of Nano Crystalline Soft Magnetic Alloys (FINEMET 30) August 29 (Wed) 31 (Fri) 2018 Institute for
Ill Ryu. Stanford University (Palo Alto, CA) April, 2013 Ph.D. in Materials Science and Engineering with Minor in Mechanical Engineering
Ill Ryu The University of Texas at Dallas Mechanical Engineering 800 West Campbell Rd., ECSN 2.930 Richardson, TX 75080-3021 Phone (972) 883 3856 Fax (972) 883 4659 ill.ryu@utdallas.edu Education Stanford
Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the
Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the Current Materials Accomplishments till date As the structural
Joining of C f /SiC composites with Niobium alloy
Joining of C f /SiC composites with Niobium alloy Y. Du, C. Liang, X. Zheng College of Aerospace & Materials Engineering National University of Defense Technology Changsha, 410073, P.R. China Email:yongguod@hotmail.com
Ruixia (Sandy) Shi. Phone: Department of Supply Chain Management, University of San Diego
Ruixia (Sandy) Shi Email: rshi@sandiego.edu Phone: 619-260-7629 ACADEMIC EXPERIENCE Associate Professor Department of Supply Chain Management, University of San Diego Jul. 2016 - Present Assistant Professor
Surface Modification of Materials by Coatings and Films 2009
@lflkl#j1 i Surface Modification of Materials by Coatings and Films 2009 Editors Xuanyong Liu Shanghai Institute of Ceramics Chinese Academ 'I of Sciences 1295 0109;(1 Road. Shanghai 200050 China PaulK.
MECHANICAL PROPERTIES RESEARCH LABORATORY (MPRL) Annual Report. Prepared by:
MECHANICAL PROPERTIES RESEARCH LABORATORY (MPRL) 2000-2001 Annual Report Prepared by: David L. McDowell, Director Telephone: (404) 894-5128 Fax: (404) 894-0186 W. Steven Johnson, Associate Director Telephone:
MELDA ORMECI MATOGLU
MELDA ORMECI MATOGLU EDUCATION PhD in Industrial and Systems Engineering, 2006 Georgia Institute of Technology, Atlanta, Georgia Manufacturing and Logistics Track, Thesis: Inventory Control In A Build-To-Order
Aluminum Alloys for Additive Manufacturing
Aluminum Alloys for Additive Manufacturing A Metallurgical Perspective of the Modern Economy Joseph R Croteau, MS Materials Engineer NanoAl LLC nanoal.com 8025 Lamon Ave, Suite 446 Skokie, IL 60077 jcroteau@nanoal.com
Corrosion protection and control using nanomaterials
Corrosion protection and control using nanomaterials Edited by Viswanathan S. Saji and Ronald Cook WP WOODHEAD PUBLISHING Oxford Cambridge Philadelphia New Delhi Contents Contributor contact details Preface
EMA 3012C Experimental Techniques in Mechanics and Materials Spring Semester 2005
Mechanical, Materials & Aerospace Engineering Department EMA 3012C Experimental Techniques in Mechanics and Materials Spring Semester 2005 INSTRUCTOR: Dr. Samar Jyoti Kalita ( Dr. Samar ) Assistant Professor
FINAL TECHNICAL REPORT AN EXPERIMENTAL FRACTURE MECHANICS EVALUATION OF CREEP INDUCED EMBRITTLEMENT. NSF Grant ENG
FINAL TECHNICAL REPORT on AN EXPERIMENTAL FRACTURE MECHANICS EVALUATION OF CREEP INDUCED EMBRITTLEMENT NSF Grant ENG 77-04430 Period from Oct. 1, 1977 to Jan. 31, 1980 SCHOOL OF AEROSPACE ENGINEERING GEORGIA
Synthesis of nanoscale CN x /TiAlN multilayered coatings by ion-beam-assisted deposition
Synthesis of nanoscale / multilayered coatings by ion-beam-assisted deposition M. Cao, D. J. Li, a and X. Y. Deng College of Physics and Electronic Information Science, Tianjin Normal University, Tianjin
Invited Talks List. Dr. Terry M. Tritt Department of Physics and Astronomy Clemson University Clemson, SC 29634
Invited Talks List Dr. Department of Physics and Astronomy Clemson University Clemson, SC 29634 Overview of Thermoelectric Phenomenon, Applications and Directions in Bulk Thermoelectric Materials Research.
Bridging Nanoscience and Manufacturing
Bridging Nanoscience and Manufacturing Xiaochun Li Professor and Raytheon Chair in Manufacturing Department of Mechanical and Aeropsace Engineering UCLA Bridging Nanoscience and Manufacturing Penetration
Ph.D. BIET / VTU Composite Materials. UBDTCE / Kuvempu University. B.E. Industrial Production Engineering
Updated on: (Mention the date on which you edit this document). Name: Dr. RAJANEESH N. MARIGOUDAR. Designation: Professor & Head of the Department. Department: Mechanical Engineering 4. Academic Background:
Let s show em what we re made of
Let s show em what we re made of might be an effective battle cry for human warfighters, but when considering the materials on which these warfighters rely, relating material composition to properties
Oxford University Materials 2005
Oxford University Materials 2005 Fusion materials Fission materials Materials for Fusion and Fission Power 2013 Fusion materials Fission materials CCFE Materials for Fission & Fusion Power Steve Roberts
Tio2 Reinforced Al2o3 Composites
Tio2 Reinforced Al2o3 Composites Gunhan Bayrak1, Ferit Ilgar2, Ediz Ercenk3, Senol Yilmaz3, Uğur Sen3, Volkan Gunay4 1Sakarya University, Arifiye Vocational School, 54580 Arifiye, Sakarya 2Alpha Foundry
ANNOUNCEMENT AND CALL FOR PAPERS for TMNN The International Symposium on Thermal and Materials Nanoscience and Nanotechnology, TMNN-2011
ANNOUNCEMENT AND CALL FOR PAPERS for TMNN-2011 The International Symposium on Thermal and Materials Nanoscience and Nanotechnology, TMNN-2011 Dedeman Hotel, Antalya, Turkey May 29 - June 3, 2011 For further
CREEP CREEP. Mechanical Metallurgy George E Dieter McGraw-Hill Book Company, London (1988)
CREEP CREEP Mechanical Metallurgy George E Dieter McGraw-Hill Book Company, London (1988) Review If failure is considered as change in desired performance*- which could involve changes in properties and/or
MECHANICAL PROPERTIES RESEARCH LABORATORY (MPRL) Annual Report. Prepared by:
MECHANICAL PROPERTIES RESEARCH LABORATORY (MPRL) http://mprl.me.gatech.edu/ 2012-2013 Annual Report Prepared by: Richard W. Neu, Director Telephone: (404) 894-3074 Christopher Muhlstein, Associate Director
Research in Experimental Solid Mechanics. Krishna Jonnalagadda Mechanical Engineering Indian Institute of Technology Bombay
Research in Experimental Solid Mechanics Krishna Jonnalagadda Mechanical Engineering Indian Institute of Technology Bombay TEQIP Workshop - Experimental Solid Mechanics Indian Institute of Technology Bombay
ION IRRADIATION-INDUCED NANO-CRYSTALLIZATION METALLIC GLASSES (AMORPHOUS METAL)
ION IRRADIATION-INDUCED NANO-CRYSTALLIZATION METALLIC GLASSES (AMORPHOUS METAL) A Senior Scholars Thesis by MINH HONG TRAN Submitted to Honors and Undergraduate Research Texas A&M University in partial
Dr. Qun Zhou Update: 8/2/2018
Dr. Qun Zhou Update: 8/2/2018 CONTACT INFORMATION HEC 358, ECE Department Orlando, FL 32816 Tel: (407) 823-3284 Email: Qun.Zhou@ucf.edu Homepage: http://www.eecs.ucf.edu/~qzhou/ RESEARCH INTERESTS CURRENT
Mechanical Properties of Bulk Metallic Glasses and composites
Mechanical Properties of Bulk Metallic Glasses and composites M.L. Lee 1 *, Y. Li 1, 2, Y. Zhong 1, C.W. Carter 1, 3 1. Advanced Materials for Micro- and Nano- Systems Programmes, Singapore-MIT Alliance,
Curriculum Vitae. Education: Professional Experience:
Dr. Lawrence Kumar Assistant Professor Centre for Nanotechnology Central University of Jharkhand Ranchi-835205, INDIA Email: lawrence.kumar@cuj.ac.in lawrencecuj@gmail.com Mobile No: +91-9771630347 Curriculum
15 Prospect Street, Room 021 Voice: (203)
Weihua Guan Contact Information Research Interests Education 15 Prospect Street, Room 021 Voice: (203) 535-2661 Becton Center, Yale University E-mail: weihua.guan@yale.edu New Haven, CT 06520 USA Web:
Pylin Sarobol U.S. Citizen
U.S. Citizen 701 West Stadium Ave, West Lafayette, IN 47907 psarobol@purdue.edu EDUCATION Purdue University, IN Doctor of Philosophy in Materials Engineering May, 2013 Ph. D. Thesis: Effects of Local Film
ADITYA P. SHIVPRASAD CURRICULUM VITÆ
ADITYA P. SHIVPRASAD CURRICULUM VITÆ GRADUATE RESEARCH ASSISTANT Department of Mechanical and Nuclear Engineering Pennsylvania State University 128 Hammond Building University Park, PA USA 16802 Email:
A coefficient of thermal expansion approximately 20% lower than that of INCONEL alloy 718.
www.specialmetals.com The newest of the high-performance superalloys invented by Special Metals Corporation, INCONEL alloy 783 (UNS R3783/U.S. Patent 5,478,417), is an oxidation-resistant, low expansion,
EECS130 Integrated Circuit Devices
EECS130 Integrated Circuit Devices Professor Ali Javey 9/13/2007 Fabrication Technology Lecture 1 Silicon Device Fabrication Technology Over 10 15 transistors (or 100,000 for every person in the world)
Microscale testing techniques for constituent characterization in computational micromechanics
8 th International Conference on Composites testing and Model Identification (COMPTEST2017), Leuven 5 th April 2017 Microscale testing techniques for constituent characterization in computational micromechanics
Structural materials for Fusion and Generation IV Fission Reactors
Hungarian Academy of Sciences KFKI Atomic Energy Research Institute Structural materials for Fusion and Generation IV Fission Reactors Ákos Horváth Materials Department akos.horvath@aeki.kfki.hu EFNUDAT
CURRICULUM VITAE Bahar Yetis Kara
CURRICULUM VITAE Bahar Yetis Kara 1. Personal Data: Date and Place of Birth : May 8, 1970, Eskişehir Turkey Address : Department of Industrial Engineering Bilkent University, 06800 Ankara-Turkey Phone
Effects of Glass-Forming Metallic Film on the Fatigue Behavior of C-2000 Ni-Based Alloy
Mater. Res. Soc. Symp. Proc. Vol. 903E 2006 Materials Research Society 0903-Z14-13.1 Effects of Glass-Forming Metallic Film on the Fatigue Behavior of C-2000 Ni-Based Alloy F. X. Liu 1, C. L. Chiang 1,2,
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AN Al-CuO IN SITU COMPOSITE PRODUCED BY FRICTION STIR PROCESSING
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AN Al-CuO IN SITU COMPOSITE PRODUCED BY FRICTION STIR PROCESSING G. L. You *, P. W. Kao and N. J. Ho Department
SPECIALIZED PROFESSIONAL COMPETENCE:
ARUN KUMAR, Ph.D. PRESIDENT SEAL Laboratories 250 N. Nash Street El Segundo, CA 90245 Phone: 310-322-2011; FAX: 310-322-2243 e-mail: akumar@seallabs.com SPECIALIZED PROFESSIONAL COMPETENCE: Failure analysis
Available online at ScienceDirect. Procedia Engineering 79 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 79 (2014 ) 212 217 37th National Conference on Theoretical and Applied Mechanics (37th NCTAM 2013) & The 1st International Conference
Peyman Narjabadifam. University of Bonab
University of Bonab narjabadi@tabrizu.ac.ir My name is Peyman. Peyman means to commit yourself to do what you believe or promise and is a given family name regarding beautiful gardens my great grandfather
Effect of the Substrate Distance on the Mechanical Properties of SnBi-χAl2O3 Joint Welded by Ultrasonic-assisted Brazing
3rd International Conference on Machinery, Materials and Information Technology Applications (ICMMITA 2015) Effect of the Substrate Distance on the Mechanical Properties of SnBi-χAl2O3 Joint Welded by
Tennessee State University College of Engineering and Technology Department of Mechanical Engineering
Tennessee State University College of Engineering and Technology Department of Mechanical Engineering The Impact of Modeling, Simulation, and Characterization of the Mechanical Properties of Nano-materials
The National Institute of Engineering, Mysore FACULTY PROFILE
The National Institute of Engineering, Mysore FACULTY PROFILE 0. Name of the Faculty [in Block Letters] 02. Date of Birth 04. Designation 05. Department 06. Date of Joining NIE SANGAMESHA M A DD MM YYYY
Research Article Amorphization, Crystallization, and Magnetic Properties of Melt-Spun SmCo 7 x (Cr 3 C 2 ) x Alloys
Metallurgy Volume 2, Article ID 9268, 5 pages doi:.55/2/9268 Research Article Amorphization, Crystallization, and Magnetic Properties of Melt-Spun SmCo 7 x (Cr 3 C 2 ) x Alloys Liya Li, 2 and Wei Xie 2
1. Introduction. Abstact
A Review On Superplastic Behaviour In Light Alloys Dr. P. Prabhakar Reddy; Dr. P. V.R. Ravindra Reddy; A. A. Sriramakrishna Associate Professors, Department of Mechanical Engg, Chaitnaya Bharathi Institute
Assistant Professor University of Colorado Colorado Springs AUG 2010 to present
Ying Fan Assistant Professor of Operations Management College of Business and Administration University of Colorado Colorado Springs 1420 Austin Bluffs Parkway Colorado Springs, CO USA 80918 Telephone:
In-situ Electron Microscopy Mechanical Testing for Steels
Technical Report UDC 621. 385. 2 : 620. 17 : 669. 14 In-situ Electron Microscopy Mechanical Testing for Steels Shunsuke TANIGUCHI* Gerhard DEHM Abstract This paper outlines the techniques of in-situ electron
ZHIHUA WANG ARIZONA STATE UNIVERSITY
CURRICULUM VITAE ZHIHUA WANG ARIZONA STATE UNIVERSITY School of Sustainable Engineering and the Built Environment Tempe, AZ, 85287-5306 Tel: +1-480-727-9592; Fax: +1-480-965-0557 Email: zhwang@asu.edu