Print citation overview
|
|
- Ariel Bruce
- 6 years ago
- Views:
Transcription
1 Print citation overview < Back Print Date of creation: 28 February 2013 This is a citation overview for a set of 71 documents. h index = 18 Of the 71 documents considered for the h-index, 18 have been cited at least 18 times. Note: Scopus does not have complete citation information for articles published before Citations < subtotal >2013 total 71 Cited documents Total (2013) Experimental and fin (2013) Optimization of proc (2012) Multi-objective proc (2012) Finite element model (2012) Nanosecond pulsed la (2012) Effect of process pa (2012) Nanosecond pulsed la (2012) Prediction of machin (2011) Effects of tool micr (2011) Statistically based (2011) Prediction of machin (2011) Experiments and fini (2011) Swarm intelligent se (2011) Design of a decision (2011) Machining induced su (2011) 3d finite element mo /12
2 17 (2010) Finite element simul (2010) Modified material co (2010) Investigations on th (2010) Investigations on th (2009) Influence of process (2009) Experimental and fin (2009) A framework for esta (2009) Investigations on me (2009) Editorial: Special s (2009) An experimental meth (2009) Computational modell (2009) Neural network proce (2009) Neural network model (2008) Process simulations (2008) Numerical modelling (2008) Hard turning with va (2008) Analytical and therm (2008) Mechanics of high sp (2007) Micromilling process (2007) Pulsed laser assiste (2007) Laser micro-machinin (2007) Multi-objective opti (2007) Finite element model (2007) 3-D FEA of hard turn (2007) Modelling of surface (2007) Identification of co (2006) Identification of fr (2006) An experimental and (2006) An integrated analyt (2006) Swarm-intelligent ne (2006) Predictive analytica (2006) Predictive analytica (2006) The influence of fri /12
3 50 (2006) A methodology to det (2006) Precision tracking c (2005) Finite element model (2005) Workpiece material m (2005) An analytical-therma (2005) Hard turning optimiz (2005) Predictive modeling (2005) Effects of cutting e (2004) Predictive modeling (2004) Internet based remot (2004) A methodology to det (2004) Determination of wor (2003) Precision tracking c (2003) Modeling of hard par (2002) Prediction of flank (2000) Process simulation u (2000) High-speed machining (2000) Determination of wor (1998) Prediction of chip f (1998) Prediction of chip f (1998) Prediction of chip f (1998) High speed cutting o / 71 Documents in overview 1) Thepsonthi, T., Experimental and finite element simulation based investigations on micro-milling Ti-6Al- 4V titanium alloy: Effects of cbn coating on tool wear (2013) Journal of Materials Processing Technology, 213 (4), pp Article in Press. 2) Teixidor, D., Ferrer, I., Ciurana, J., Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel (2013) Robotics and Computer-Integrated Manufacturing, 29 (1), pp ) 3/12
4 Thepsonthi, T., Multi-objective process optimization for micro-end milling of Ti-6Al-4V titanium alloy (2012) International Journal of Advanced Manufacturing Technology, 63 (9-12), pp ) Thepsonthi, T., Finite element modeling and simulation of micro-milling (2012) Transactions of the North American Manufacturing Research Institution of SME, 40, pp ) Teixidor, D., Ciurana, J., Thepsonthi, T., Nanosecond pulsed laser micro-machining of PMMA-based microfluidic channels (2012) Transactions of the North American Manufacturing Research Institution of SME, 40, pp ) Teixidor, D., Orozco, F., Thepsonthi, T., Ciurana, J., Rodríguez, C.A., Effect of process parameters in nanosecond pulsed laser micromachining of PMMAbased microchannels at near-infrared and ultraviolet wavelengths (2012) International Journal of Advanced Manufacturing Technology, pp Article in Press. 7) Teixidor, D., Thepsonthi, T., Ciurana, J., Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels (2012) Journal of Manufacturing Processes, 14 (4), pp ), Ulutan, D. Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations (2012) CIRP Annals - Manufacturing Technology, 61 (1), pp ) Sima, M., Ulutan, D., Effects of tool micro-geometry and coatings in turning of Ti-6Al-4V titanium alloy (2011) Transactions of the North American Manufacturing Research Institution of SME, 39, pp ) Thepsonthi, T., Statistically based process optimization for improved surface quality in micro-end milling of Ti-6Al- 4V titanium alloy (2011) Transactions of the North American Manufacturing Research Institution of SME, 39, pp ) 4/12
5 Ulutan, D., Sima, M., Prediction of machining induced surface integrity using elastic-viscoplastic simulations and temperature-dependent flow softening material models in titanium and nickel-based alloys (2011) Advanced Materials Research, 223, pp ), Thepsonthi, T., Ulutan, D., Kaftanolu, B. Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cbn coated micro-tools (2011) CIRP Annals - Manufacturing Technology, 60 (1), pp ) Vázquez, E., Ciurana, J., Rodríguez, C.A., Thepsonthi, T., Swarm intelligent selection and optimization of machining system parameters for microchannel fabrication in medical devices (2011) Materials and Manufacturing Processes, 26 (3), pp ) Alberti, M., Ciurana, J., Rodríguez, C.A., Design of a decision support system for machine tool selection based on machine characteristics and performance tests (2011) Journal of Intelligent Manufacturing, 22 (2), pp ) Ulutan, D., Ozel, T. Machining induced surface integrity in titanium and nickel alloys: A review (2011) International Journal of Machine Tools and Manufacture, 51 (3), pp ) Ozel, T., Llanos, I., Soriano, J., Arrazola, P.-J. 3d finite element modelling of chip formation process for machining inconel 718: Comparison of FE software predictions (2011) Machining Science and Technology, 15 (1), pp ), Sima, M., Srivastava, A.K. Finite element simulation of high speed machining Ti-6Ai-4V alloy using modified material models (2010) Transactions of the North American Manufacturing Research Institution of SME, 38, pp ) Sima, M., Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti-6Al-4V (2010) International Journal of Machine Tools and Manufacture, 50 (11), pp /12
6 19), Sima, M., Srivastava, A.K., Kaftanoglu, B. Investigations on the effects of multi-layered coated inserts in machining Ti-6Al-4V alloy with experiments and finite element simulations (2010) CIRP Annals - Manufacturing Technology, 59 (1), pp ) Arrazola, P.J., Investigations on the effects of friction modeling in finite element simulation of machining (2010) International Journal of Mechanical Sciences, 52 (1), pp ) Pellicer, N., Ciurana, J., Ozel, T. Influence of process parameters and electrode geometry on feature micro-accuracy in electro discharge machining of tool steel (2009) Materials and Manufacturing Processes, 24 (12), pp ) Experimental and finite element investigations on the influence of tool edge radius in machining nickel-based alloy (2009) Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 1, pp ), Yildiz, S. A framework for establishing energy efficiency and ecological footprint metrics for sustainable manufacturing of products (2009) Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 1, pp ), Liu, X. Investigations on mechanics-based process planning of micro-end milling in machining mold cavities (2009) Materials and Manufacturing Processes, 24 (12), pp ) Editorial: Special section on micromanufacturing processes and applications (2009) Materials and Manufacturing Processes, 24 (12), p ) Lee, W.-H., An experimental method for laser micro-machining of spherical and elliptical 3-D objects (2009) International Journal of Nanomanufacturing, 3 (3), pp /12
7 27) Computational modelling of 3D turning: Influence of edge micro-geometry on forces, stresses, friction and tool wear in PcBN tooling (2009) Journal of Materials Processing Technology, 209 (11), pp ), Correia, A.E., Davim, J.P. Neural network process modelling for turning of steel parts using conventional and wiper inserts (2009) International Journal of Materials and Product Technology, 35 (1-2), pp ) Ciurana, J., Arias, G., Ozel, T. Neural network modeling and particle swarm optimization (PSO) of process parameters in pulsed laser micromachining of hardened AISI H13 steel (2009) Materials and Manufacturing Processes, 24 (3), pp ) Process simulations for 3D turning using uniform and variable microgeometry PCBN tools (2008) International Journal of Machining and Machinability of Materials, 4 (1), pp ) Arrazola, P.J., Numerical modelling of 3D hard turning using arbitrary Lagrangian Eulerian finite element method (2008) International Journal of Machining and Machinability of Materials, 4 (1), pp ), Karpat, Y., Srivastava, A. Hard turning with variable micro-geometry PcBN tools (2008) CIRP Annals - Manufacturing Technology, 57 (1), pp ) Analytical and thermal modeling of high-speed machining with chamfered tools (2008) Journal of Manufacturing Science and Engineering, Transactions of the ASME, 130 (1), pp ) Mechanics of high speed cutting with curvilinear edge tools (2008) International Journal of Machine Tools and Manufacture, 48 (2), pp ) 7/12
8 Dhanorker, A., Liu, X., Micromilling process planning and modeling for micromold manufacturing (2007) Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007, pp ), Pfefferkorn, F. Pulsed laser assisted micromilling for die/mold manufacturing (2007) Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007, pp ) Lee, W.-H., Laser micro-machining of spherical and elliptical 3-D objects using hole area modulation method (2007) Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007, pp ) Multi-objective optimization for turning processes using neural network modeling and dynamic-neighborhood particle swarm optimization (2007) International Journal of Advanced Manufacturing Technology, 35 (3-4), pp ), Zeren, E. Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining (2007) International Journal of Advanced Manufacturing Technology, 35 (3-4), pp ) 3-D FEA of hard turning: Investigation of PCBN cutting tool micro-geometry effects (2007) Transactions of the North American Manufacturing Research Institution of SME, 35, pp ), Karpat, Y., Figueira, L., Davim, J.P. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts (2007) Journal of Materials Processing Technology, 189 (1-3), pp ), Karpat, Y. Identification of constitutive material model parameters for high-strain rate metal cutting conditions using evolutionary computational algorithms (2007) Materials and Manufacturing Processes, 22 (5), pp /12
9 43) Karpat, Y.,?zel, T. Identification of friction factors for chamfered and honed tools through slip-line field analysis (2006) Proceedings of the International Conference on Manufacturing Science and Engineering, ) Dhanorker, A., An experimental and modeling study on meso/micro end milling process (2006) Proceedings of the International Conference on Manufacturing Science and Engineering, ) An integrated analytical thermal model for orthogonal cutting with chamfered tools (2006) Transactions of the North American Manufacturing Research Institute of SME, 34, pp ) Swarm-intelligent neural network system (SINNS) based multi-objective optimization of hard turning (2006) Transactions of the North American Manufacturing Research Institute of SME, 34, pp ) Predictive analytical and thermal modeling of orthogonal cutting process-part II: Effect of tool flank wear on tool forces, stresses, and temperature distributions (2006) Journal of Manufacturing Science and Engineering, Transactions of the ASME, 128 (2), pp ) Predictive analytical and thermal modeling of orthogonal cutting process-part I: Predictions of tool forces, stresses, and temperature distributions (2006) Journal of Manufacturing Science and Engineering, Transactions of the ASME, 128 (2), pp ) The influence of friction models on finite element simulations of machining (2006) International Journal of Machine Tools and Manufacture, 46 (5), pp ), Zeren, E. 9/12
10 A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining (2006) Journal of Manufacturing Science and Engineering, Transactions of the ASME, 128 (1), pp ) Precision tracking control of a horizontal arm coordinate measuring machine in the presence of dynamic flexibilities (2006) International Journal of Advanced Manufacturing Technology, 27 (9-10), pp ), Zeren, E. Finite element modeling of stresses induced by high speed machining with round edge cutting tools (2005) American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 16-2, pp ) Karpat, Y., Zeren, E., Workpiece material model based predictions for machining processes (2005) Transactions of the North American Manufacturing Research Institute of SME, 33, pp ) An analytical-thermal modeling approach for predicting forces, stresses and temperatures in machining with worn tools (2005) American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 16-1, pp ) Hard turning optimization using neural network modeling and swarm intelligence (2005) Transactions of the North American Manufacturing Research Institute of SME, 33, pp ), Karpat, Y. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks (2005) International Journal of Machine Tools and Manufacture, 45 (4-5), pp ), Hsu, T.-K., Zeren, E. Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel 10/12
11 (2005) International Journal of Advanced Manufacturing Technology, 25 (3-4), pp ), Karpat, Y. Predictive modeling of hard turning processes using neural networks (2004) IIE Annual Conference and Exhibition 2004, p ), Hsu, T.-K. Internet based remote monitoring of experiments in hard turning (2004) IIE Annual Conference and Exhibition 2004, p ), Zeren, E. A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining (2004) American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 255, art. no. IMECE , pp ), Zeren, E. Determination of work material flow stress and friction for FEA of machining using orthogonal cutting tests (2004) Journal of Materials Processing Technology, (1-3), pp ) Precision tracking control of a horizontal arm coordinate measuring machine (2003) IEEE Conference on Control Applications - Proceedings, 1, pp ) Modeling of hard part machining: Effect of insert edge preparation in CBN cutting tools (2003) Journal of Materials Processing Technology, 141 (2), pp ), Nadgir, A. Prediction of flank wear by using back propagation neural network modeling when cutting hardened H-13 steel with chamfered and honed CBN tools (2002) International Journal of Machine Tools and Manufacture, 42 (2), pp ), Altan, T. Process simulation using finite element method - prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling (2000) International Journal of Machine Tools and Manufacture, 40 (5), pp /12
12 66) Fallböhmer, P., Rodríguez, C.A.,, Altan, T. High-speed machining of cast iron and alloy steels for die and mold manufacturing (2000) Journal of Materials Processing Technology, 98 (1), pp ), Altan, T. Determination of workpiece flow stress and friction at the chip-tool contact for highspeed cutting (2000) International Journal of Machine Tools and Manufacture, 40 (1), pp ), Lucchi, M., Rodríguez, C.A., Altan, T. Prediction of chip formation and cutting forces in flat end milling: Comparison of process simulations with experiments (1998) Technical Paper - Society of Manufacturing Engineers. AD, (250), pp ), Lucchi, M., Rodríguez, C.A., Altan, T. Prediction of chip formation and cutting forces in flat end milling: Comparison of process simulations with experiments (1998) Technical Paper - Society of Manufacturing Engineers. MR, 98 (250) 70) Ozel, Tugrul, Rodriguez, Ciro A., Lucchi, Marco, Altan, Taylan Prediction of chip formation and cutting forces in flat end milling: Comparison of process simulations with experiments (1998) Technical Paper - Society of Manufacturing Engineers. MR, pp ) Altan, T., Fallböhmer, P., Rodriguez, C., High speed cutting of cast iron and alloy steels - State of research (1998) VDI Berichte, (1399), pp Copyright 2013 Elsevier B.V. All rights reserved. SciVerse is a registered trademark of Elsevier Properties S.A., used under license. Scopus is a registered trademark of Elsevier B.V. 12/12
Finite Element Modeling for Prediction of Cutting Forces during Micro Turning of Titanium Alloy
5 th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12 th 14 th, 2014, IIT Guwahati, Assam, India Finite Element Modeling for Prediction
More informationSTATUS OF FEM MODELING IN HIGH SPEED CUTTING - A Progress Report -
STATUS OF FEM MODELING IN HIGH SPEED CUTTING - A Progress Report - Dr. Taylan Altan, Professor and Director Partchapol (Jay) Sartkulvanich, Graduate Research Associate Ibrahim Al-Zkeri, Graduate Research
More informationRESIDUAL STRESSES IN MACHINING USING FEM
: Rev. Adv. A : Mater. Sci. 30 (2012) : : : : 267-272 : 267 RESIDUAL STRESSES IN MACHINING USING FEM A REVIEW C. Maranh o and J. P. Davim Department of Mechanical Engineering, University of Aveiro, Campus
More informationANALYSIS OF CUTTING FORCE AND CHIP MORPHOLOGY DURING HARD TURNING OF AISI D2 STEEL
Journal of Engineering Science and Technology Vol. 10, No. 3 (2015) 282-290 School of Engineering, Taylor s University ANALYSIS OF CUTTING FORCE AND CHIP MORPHOLOGY DURING HARD TURNING OF AISI D2 STEEL
More informationPulsed Laser Assisted Micromilling for Die/Mold Manufacturing
Pulsed Laser Assisted Micromilling for Die/Mold Manufacturing Tuğrul Özel* Dept. of Industrial and Systems Engineering Rutgers University Piscataway, NJ 08854 USA ozel@rci.rutgers.edu *Corresponding author
More informationFINITE ELEMENTSIMULATION IN ORTHOGONAL MACHINING OF INCONEL 718 ALLOY
FINITE ELEMENTSIMULATION IN ORTHOGONAL MACHINING OF INCONEL 718 ALLOY P.DEEPAGANESH. ME CAD/CAM, Shanmuganathan Engineering College, Pudukottai. ABSTRACT Knowing the stringent operating conditions to which
More informationCIRP Annals - Manufacturing Technology
CIRP Annals - Manufacturing Technology 59 (2010) 77 82 Contents lists available at ScienceDirect CIRP Annals - Manufacturing Technology journal homepage: http://ees.elsevier.com/cirp/default.asp Investigations
More informationHigh Speed Machining of Inconel 718 Focusing on Tool Surface Topography of CBN Tool
Procedia Manufacturing Volume 1, 2015, Pages 675 682 43rd Proceedings of the North American Manufacturing Research Institution of SME http://www.sme.org/namrc High Speed Machining of Inconel 718 Focusing
More informationGSJ: Volume 7, Issue 1, January 2019 ISSN GSJ: Volume 7, Issue 1, January 2019, Online: ISSN
676, Online: EXPERT MODELLING AND PREDICTION OF VON MISES STRESSES IN CARBIDE INSERT CUTTING TOOL USING FEM (ANSYS) M.O Ozakpolor 1, J.I Achebo 2 and S.E Ogbeide 3 othuke2477@gmail.com (Ozakpolor, M.O)
More informationApplication of smooth-particle hydrodynamics in metal machining
Loughborough University Institutional Repository Application of smooth-particle hydrodynamics in metal machining This item was submitted to Loughborough University's Institutional Repository by the/an
More informationISSN: [Arezoo* et al., 6(6): June, 2017] Impact Factor: 4.116
ISSN: 2277-96 [Arezoo* et al., 6(6): June, 27] Impact Factor: 4.6 IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY OPTIMIZATION OF CARBIDE BALL NOSE END MILL PROFILE ANGLES IN
More informationAvailable online at ScienceDirect. Procedia Materials Science 6 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Materials Science 6 (2014 ) 1351 1358 3rd International Conference on Materials Processing and Characterization (ICMPC 2014) Investigations
More informationEXPERIMENTAL INVESTIGATION ON CUTTING FORCE AND SURFACE ROUGHNESS IN MACHINING OF HARDENED AISI STEEL USING CBN TOOL
5 th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12 th 14 th, 2014, IIT Guwahati, Assam, India EXPERIMENTAL INVESTIGATION ON CUTTING
More informationInternational Journal of Industrial Engineering Computations
International Journal of Industrial Engineering Computations (2014) 407 416 Contents lists available at GrowingScience International Journal of Industrial Engineering Computations homepage: www.growingscience.com/ijiec
More informationEffect Of Machining Parameters On Residuel Stresses Distribution
Australian Journal of Basic and Applied Sciences, 11(5) April 217, Pages: 196-21 AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES ISSN:1991-8178 EISSN: 239-8414 Journal home page: www.ajbasweb.com Effect
More informationMachining of Micro Rotational Parts. with Wire EDM Machine
Procedia Manufacturing Volume 5, 2016, Pages 849 856 44th Proceedings of the North American Manufacturing Research Institution of SME http://www.sme.org/namrc Machining of Micro Rotational Parts with Wire
More informationPolycrystalline cubic boron nitride blanks and cut shapes for milling and turning tools. TOOLMAKER SOLUTIONS BZN Compacts Tool Blanks and Inserts
Polycrystalline cubic boron nitride blanks and cut shapes for milling and turning tools TOOLMAKER SOLUTIONS BZN Compacts Tool Blanks and Inserts BZN COMPACTS TOOL BLANKS AND INSERTS Hyperion manufactures
More informationSANDVIK HYPERION BZN COMPACTS TOOL BLANKS AND INSERTS
SANDVIK HYPERION BZN COMPACTS TOOL BLANKS AND INSERTS BZN COMPACTS TOOL BLANKS AND INSERTS Sandvik Hyperion manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
More informationInternational Journal of Mechanical Engineering and Applications
International Journal of Mechanical Engineering and Applications 2016; 4(3): 109-114 http://www.sciencepublishinggroup.com/j/ijmea doi: 10.11648/j.ijmea.20160403.12 ISSN: 2330-023X (Print); ISSN: 2330-0248
More informationInternational Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: Volume 1 Issue 8 (September 2014)
Optimization of Cutting Parameters in Hard Turning of AISI 4340 Steel Basil K Mathew Paul * Tina Raju Dr. Biju B PG Scholar, Department of Mechanical Asst. Professor, Department of Associate Professor
More informationFINITE ELEMENT SIMULATION OF HIGH SPEED MACHINING 4V ALLOY USING MODIFIED MATERIAL MODELS
FINITE ELEMENT SIMULATION OF HIGH SPEED MACHINING Ti-6Al-4V 4V ALLOY USING MODIFIED MATERIAL MODELS Tuğrul ğrul Özel* and Mohammad Sima Manufacturing Automation Research Laboratory Department of Industrial
More informationIdentification of constitutive material model parameters for high-strain rate metal cutting conditions using evolutionary computational algorithms
Identification of constitutive material model parameters for high-strain rate metal cutting conditions using evolutionary computational algorithms Tuğrul Özel 1 and Yiğit Karpat Department of Industrial
More informationProfile Milling Program Tools
Profile Milling Program Tools Small Ball Nose & Back raft Inserts VRBS 2 imensions R XRN TN HSN escription VRBS-0250 0.250 0.294 0.125 Used for semi and finish-milling small radius or detail work, VRBS-0312
More informationFEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718
FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718 N. Bauskar 1, R. Mali 2, T. Gupta 3* 1 PG Student, 2 Research Scholar, 3 Assistant Professor Visvesvaraya National
More informationLaser Assisted Machining of Hard-to-Wear Materials
Laser Assisted Machining of Hard-to-Wear Materials by Kelly Armitage A/Prof. Syed Masood A/Prof. Milan Brandt Chalapi Pomat Weir Warman Ltd. Abstract This research is being conducted at the Industrial
More informationPERFORMANCE EVALUATION OF TiN COATED AND UNCOATED CARBIDE TOOLS IN TURNING AISI 4140 STEEL
5 th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12 th 14 th, 2014, IIT Guwahati, Assam, India PERFORMANCE EVALUATION OF TiN COATED AND
More informationResearch Article A Study on Ultrasonic Elliptical Vibration Cutting of Inconel 718
Shock and Vibration Volume 2016, Article ID 3638574, 11 pages http://dx.doi.org/10.1155/2016/3638574 Research Article A Study on Ultrasonic Elliptical Vibration Cutting of Inconel 718 Zhao Haidong, Zou
More informationMFH Micro. Micro Dia. Cutter for High Feed Machining. Low Resistance and Durable Against Chatter for Highly Efficient Machining
Micro Diameter High Feed Mills Micro Dia. Cutter for High Feed Machining Low Resistance and Durable Against Chatter for Highly Efficient Machining Shortens Rough Machining Times Replaces Solid End Mills
More informationAvailable online at ScienceDirect. 6th CIRP International Conference on High Performance Cutting, HPC2014
Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 14 ( 2014 ) 377 382 6th CIRP International Conference on High Performance Cutting, HPC2014 Experimental Investigations on Micro Milling
More informationCHAPTER 2 LITERATURE REVIEW OF HARD TURNING
6 CHAPTER 2 LITERATURE REVIEW OF HARD TURNING The process of hard turning has been studied theoretically and experimentally for over 40 years (Tonshoff et al 2000). In the late 60s itself, Shaw and Nakayama
More informationAvailable online at ScienceDirect. Procedia Engineering 97 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 97 (2014 ) 1466 1473 12th GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT, GCMM 2014 A Study of Temperature Distribution for
More informationEffect of Cutting Parameters on Tool Life
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2016 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Sandip
More informationLASER BEAM MACHINING OF INCONEL ALLOYS: A REVIEW
International Journal on Design & Manufacturing Technologies Vol.11 No.1 January 2017 9 LASER BEAM MACHINING OF INCONEL ALLOYS: A REVIEW Akshee shivam 1, Santanu Chakraborty 2, B.B.Pradhan 3 Mechanical
More informationCutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
More informationEvaluation of the Minimum Quantity Lubrication in Orthogonal Cutting with the Application of Finite Element Method
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:17 No:01 1 Evaluation of the Minimum Quantity Lubrication in Orthogonal Cutting with the Application of Finite Element Method
More informationSchool of Mechanical Engineering, Shandong University, Jinan , China 2
Analysis and Prediction of Tool Flank Wear under Constant Material Removal Volume Condition in Turning of AISI 4140 Steel R. W. Wang 1, 2, a, S. Zhang 1, 2, b *, G. Li 1, 2, c 1, 2, d, J. F. Li 1 School
More informationAvailable online at ScienceDirect. Procedia CIRP 31 (2015 ) th CIRP Conference on Modelling of Machining Operations
Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 31 (2015 ) 24 28 15th CIRP Conference on Modelling of Machining Operations Springback in metal cutting with high cutting speeds N.
More informationBZN* Compacts Tool Blanks and Inserts. Machining of Ferrous Materials
BZN* Tool Blanks and Inserts Machining of Ferrous Materials BZN* Tool Blanks and Inserts Diamond Innovations manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
More informationVol 2. Carbide Flat Drills Designed for Various Applications EXOCARB ADF ADF-2D
Carbide Flat Drills Designed for Various Applications EXOCARB ADF Vol 2 Cutting Data Improved Cutting Edge for reduced cutting forces and smaller chip size. Wide Chip Room for superior chip evacuation.
More informationJongen UNI-MILL VHC milling cutter
Jongen Werkzeugtechnik Jongen UNI-MILL VHC milling cutter Trochoidal milling at the highest level Jongen UNI-MILL VHC milling cutter Static and dynamic "trochoidal milling" is a combination of circular
More informationMACHINING PERFORMANCE ASSESSMENT OF HARDENED AISI STEEL USING MULTILAYER COATED CARBIDE INSERT
Journal of Engineering Science and Technology Vol. 12, No. 6 (2017) 1488-1505 School of Engineering, Taylor s University MACHINING PERFORMANCE ASSESSMENT OF HARDENED AISI 52100 STEEL USING MULTILAYER COATED
More informationCHAPTER 21. Cutting-Tool Materials and Cutting Fluids. Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 21-1
CHAPTER 21 Cutting-Tool Materials and Cutting Fluids Manufacturing Engineering and Technology 2001 Prentice-Hall Page 21-1 Cutting Tool Material Hardnesses Figure 21.1 The hardness of various cutting-tool
More information1001 Business Center Drive Mount Prospect, IL Toll Free: (800) Phone: (847) Fax: (847)
1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo continues to develop innovative tooling
More informationExperimental Research on the Influence of Tool Material and Geometric Parameters on Cutting Surface Quality of Super Alloy
International Journal of Smart Home Vol. 10, No. 5 (016), pp. 55-60 http://dx.doi.org/10.1457/ijsh.016.10.5.06 Experimental Research on the Influence of Tool Material and Geometric Parameters on Cutting
More informationAnalysis of Burr Formation. by Image Processing in. Micro-Milling of Ti
Contemporary Engineering Sciences, Vol. 11, 2018, no. 47, 2297-2306 HIKARI Ltd, www.m-hikari.com https://doi.org/10.12988/ces.2018.84174 Analysis of Burr Formation by Image Processing in Micro-Milling
More informationIdentification of material constitutive law constants using machining tests: a response surface methodology based approach
High Performance and Optimum Design of Structures and Materials 25 Identification of material constitutive law constants using machining tests: a response surface methodology based approach M. Daoud, W.
More informationDetermination of Optimum Cutting Parameters for Surface Roughness and Tool Flank Wear in Hard Turning by Taguchi Method
IJRMET Vo l. 4, Is s u e 1, No v 2013 - Ap r i l 2014 ISSN : 2249-5762 (Online) ISSN : 2249-5770 (Print) Determination of Optimum Cutting Parameters for Surface Roughness and Tool Flank Wear in Hard Turning
More informationCUTTING TOOL TECHNOLOGY
CUTTING TOOL TECHNOLOGY Tool Life Tool Materials Tool Geometry Cutting Fluids Cutting Tool Technology Two principal aspects: 1. Tool material 2. Tool geometry Three Modes of Tool Failure Fracture failure
More informationEffect of TiN powder mixed in Electrical Discharge Machining
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Effect of TiN powder mixed in Electrical Discharge Machining To cite this article: A Muttamara and J Mesee 2016 IOP Conf. Ser.:
More informationInternational Journal of Industrial Engineering Computations
International Journal of Industrial Engineering Computations 7 (2016) 257 266 Contents lists available at GrowingScience International Journal of Industrial Engineering Computations homepage: www.growingscience.com/ijiec
More informationInvestigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
Proceedings of the World Congress on Engineering 8 Vol III WCE 8, July 2-4, 8, London, U.K. Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning SThamizhmanii* and S.Hasan
More informationSurface Integrity of Inconel 825 When Turning With Uncoated and CVD Coated Carbide Inserts
Surface Integrity of Inconel 825 When Turning With Uncoated and CVD Coated Carbide Inserts A.Thakur 1*, S.Gangopadhayay 2, K.P.Maity 3 1. INTRODUCTION During the machining of any materialit is very important
More informationULTRAPRECISION MICROMACHINING OF MICROFLUIDIC DEVICES BY USE OF A HIGH-SPEED AIRBEARING SPINDLE
ULTRAPRECISION MICROMACHINING OF MICROFLUIDIC DEVICES BY USE OF A HIGH-SPEED AIRBEARING SPINDLE Chunhe Zhang 1, Allen Y. Yi 1, Lei Li 1, L. James Lee 1, R. Ryan Vallance 2, Eric Marsh 3 1 The Ohio State
More informationA BRIEF REVIEW ON MICROMACHINING OF MATERIALS
98 Rev. Adv. Mater. Sci. 30 (2012) 98-102 P. Cardoso and J.P. Davim A BRIEF REVIEW ON MICROMACHINING OF MATERIALS P. Cardoso and J.P. Davim Department of Mechanical Engineering, University of Aveiro, Campus
More informationNUMERICAL MACHINING SIMULATION FOR AN AISI 304 STAINLESS STEEL CONSIDERING MICROFRACTURE MECHANICS ASPECTS
Copyright 2013 by ABCM NUMERICAL MACHINING SIMULATION FOR AN AISI 304 STAINLESS STEEL CONSIDERING MICROFRACTURE MECHANICS ASPECTS Gil Magno Portal Chagas University of Sao Paulo USP Polytechnic School
More informationAnalysis of Tool Temperature Distribution in Turning Processes
Analysis of Tool Temperature Distribution in Turning Processes Indra Jufri Nurraksana 1, Gaguk Jatisukamto 2, Agus Triono 3 1,2,3 Department of Mechanical Engineering, Faculty of Engineering, University
More informationExperimental Study on Tool Parameters of Al2O3 in High Speed Machining
International Journal of Current Engineering and Technology E-ISSN 2277 416, P-ISSN 2347 5161 215INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Study on
More informationChapter 8. Material-Removal
4 4 6. 3 0 5 A M A N U F A C T U R I N G P R O C E S S E S Chapter 8. Material-Removal Processes: Cutting Sung-Hoon Ahn School of Mechanical and Aerospace Engineering Seoul National University Machining
More informationEXPERIMENTAL AND MODELING ANALYSIS OF MICRO-MILLING OF HARDENED H13 TOOL STEEL
Proceedings of the ASME 2011 International Manufacturing Science and Engineering Conference MSEC2011 June 13-17, 2011, Corvallis, Oregon, USA MSEC2011-50244 EXPERIMENTAL AND MODELING ANALYSIS OF MICRO-MILLING
More informationEFFECT OF CRYOGENIC COOLING ENVIRONMENT USING CO2 ON CUTTING TEMPERATURE IN TURNING PROCESS
EFFECT OF CRYOGENIC COOLING ENVIRONMENT USING CO2 ON CUTTING TEMPERATURE IN TURNING PROCESS ABSTRACT Bolewar A.B. Department of production Engg. SPPU University / AVCOE, Sangamner, India Shinde V.B. Department
More informationTOOL NEWS. PVD Coated Cemented Carbide Grade for Carbon Steel MS6015 B210A-F. New Product
PVD Coated Cemented Carbide Grade for Carbon Steel TOOL NEWS B210A-F New Product PVD Coated Cemented Carbide Grade for Carbon Steel Engineered specifically for precision turning of low carbon steels and
More informationBZN COMPACTS TOOL BLANKS AND INSERTS
BZN COMPACTS TOOL BLANKS AND INSERTS BZN COMPACTS TOOL BLANKS AND INSERTS Sandvik Hyperion manufactures a complete line of high quality polycrystalline CBN products for machining ferrous materials. The
More informationMODELING OF HIGH SPEED MACHINING PROCESSES FOR PREDICTING TOOL FORCES, STRESSES AND TEMPERATURES USING FEM SIMULATIONS
MODELING OF HIGH SPEED MACHINING PROCESSES FOR PREDICTING TOOL FORCES, STRESSES AND TEMPERATURES USING FEM SIMULATIONS Tugrul Özel and Taylan Altan Engineering Research Center for Net Shape Manufacturing
More informationInternational Journal of Engineering Trends and Technology (IJETT) Volume 49 Number 7 July India.
Hard Turning with Wiper Ceramic Insert; Parametric Analysis and Optimization with Desirability Approach K.Venkata Subbaiah 1 Ch. Raju *2 R. S.Pawade 3 Ch. Suresh 4 1 Professor, Department of Mechanical
More informationA REWIEV TO ADVANCED MODELING AND SIMULATION OF MACHINING PROCESS
Kovač, P., Gostimirović, M., Sekulić, M., Savković B. A REWIEV TO ADVANCED MODELING AND SIMULATION OF MACHINING PROCESS Abstract: In the case of machining process, there are many phenomenon that are not
More informationRecondition to original quality. Re-grinding and Re-coating Service GUHRING YOUR WORLD-WIDE PARTNER
Recondition to original quality Re-grinding and Re-coating Service GUHRIG YOUR WORLD-WIDE ARTER Maximize your cost savings Utilize Guhring s tool reconditioning services Even the most resilient tools wear
More informationDevelopment of SUMIBORON BN7500 for Ferrous Powder Metal Finishing
INDUSTRIAL MATERIALS Development of SUMIBORON for Ferrous Powder Metal Finishing Yusuke MATSUDA*, Katsumi OKAMURA and Satoru KUKINO SUMIBORON tools are widely used in the cutting of hard-to-cut ferrous
More informationComparative assessment of standard and wiper insert on surface roughness in turning of Titanium alloy (Ti-6Al-4V)
International Journal of Engineering Research and Technology. ISSN - Volume, Number (2) Comparative assessment of standard and wiper insert on surface roughness in turning of Titanium alloy (Ti-Al-V) Pravin
More informationEXPERIMENTAL ANALYSIS OF MRR OF AL COMPOSITE USING RESPONSE SURFACE METHODOLOGY RSM
EXPERIMENTAL ANALYSIS OF MRR OF AL COMPOSITE USING RESPONSE SURFACE METHODOLOGY RSM Vikrant Sharma 1, Onkar Singh Bhatia 2 1,2 Mecahnical Engineering Department, Green Hills Engineering College, Kumarhatti,
More information4 Flute All Purpose. duramill.com. for steels, stainless steels and high-temp alloys. roughing, slotting, pocketing & ramping applications
4 Flute All Purpose for steels, stainless steels and high-temp alloys roughing, slotting, pocketing & ramping applications duramill.com 2 4 Flute AP The new WhisperKut GEN2 4 Flute AP has been engineered
More informationDr-Ing Angelos Markopoulos, Lecturer
Dr-Ing Angelos Markopoulos, Lecturer National Technical University of Athens Greece Rzeszow, Poland 16 September 2015 By the term machining, processes that shape parts by removing unwanted material, are
More informationDHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
More informationAssessment of Wear Failure Modes of Carbide Cutters in High- Speed Milling of Hardened Steels
Failure of Engineering Materials & Structures Code 26 UET TAXILA MECHNICAL ENGINEERING DEPARTMENT Assessment of Wear Failure Modes of Carbide Cutters in High- Speed Milling of Hardened Steels Asif Iqbal
More informationSurface integrity in finishing turning of Inconel 718
Surface integrity in finishing turning of Inconel 718 J. Díaz, A. Díaz-Álvarez, X. Soldani, J.L. Cantero, H. Miguélez (1) Department of Mechanical Engineering, Universidad Carlos III de Madrid, Avda. Universidad
More informationTechnics Research on Polycrystalline Cubic Boron Nitride Cutting Tools Dry Turning Ti-6AL- 4V Alloy Based on Orthogonal Experimental Design
Technics Research on Polycrystalline Cubic Boron Nitride Cutting Tools Dry Turning Ti-6AL- 4V Alloy Based on Orthogonal Experimental Design Yunhai Jia 1,2 *, Lixin Zhu 2 1 Beijing Institute of Electro-machining,
More informationNumerical Simulation of Machining Nickel-Based Alloys
Available online at www.sciencedirect.com Procedia CIRP 8 (23 ) 54 545 4 th CIRP Conference on Modeling of Machining Operations (CIRP CMMO) Numerical Simulation of Machining Nickel-Based Alloys Antonio
More informationImproving tool life using cryogenic cooling
journal of materials processing technology 196 (2008) 149 154 journal homepage: www.elsevier.com/locate/jmatprotec Improving tool life using cryogenic cooling Ahsan Ali Khan, Mirghani I. Ahmed Faculty
More informationINFLUENCE OF CUTTING CONDITIONS ON TEMPERATURE DISTRIBUTION IN FACE MILLING OF INCONEL 718 NICKEL-CHROMIUM ALLOY
Journal of Machine Engineering, Vol. 15, No.2, 2015 3D FEM simulation, milling process nickel-chromium alloy Wit GRZESIK 1 Piotr NIESLONY 1* Witold HABRAT 2 Piotr LASKOWSKI 3 INFLUENCE OF CUTTING CONDITIONS
More informationDetermination of Optimal Preform Part for Hot Forging Process of the Manufacture Axle Shaft by Finite Element Method
AIJSTPME (2013) 6(1): 35-42 Determination of Optimal Preform Part for Hot Forging Process of the Manufacture Axle Shaft by Finite Element Method Sukjantha V. Department of Production Engineering, the Sirindhorn
More informationModelling of Material Removal in Abrasive Flow Machining Process Using CFD Simulation
Journal of Basic and Applied Engineering Research Print ISSN: 2350-0077; Online ISSN: 2350-0255; Volume 1, Number 2; October, 2014 pp. 73-78 Krishi Sanskriti Publications http://www.krishisanskriti.org/jbaer.html
More informationMODELLING OF TURNING PROCESS FOR FLANK AND CRATER WEAR OF TOOL USING ANFIS Bhagyashri D. Deore 1,Prof. Dr.P.S.Desale 2, Prof. Dr.E.
MODELLING OF TURNING PROCESS FOR FLANK AND CRATER WEAR OF TOOL USING ANFIS Bhagyashri D. Deore 1,Prof. Dr.P.S.Desale 2, Prof. Dr.E.R Deore 3 1,2,3 Dept. Mechanical Engineering, S S V P S s Bapusaheb Shivajirao
More informationCutting Properties Analysis of Titanium Alloy (Ti-6Al-4V) Based on Cryogenic Cooling
Send Orders for Reprints to reprints@benthamscience.ae 122 The Open Materials Science Journal, 2014, 8, 122-126 Open Access Cutting Properties Analysis of Titanium Alloy (Ti-6Al-4V) Based on Cryogenic
More informationAmarjit Prakashrao Kene 1*, S.K. Choudhury 2. Abstract
5 th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12 th 14 th, 2014, IIT Guwahati, Assam, India Behaviour of Cutting Forces in Hard Turning
More informationTOOLMAKER SOLUTIONS Custom-Made Inserts Blanks
Non-ISO carbide insert blanks for threading, parting, grooving, drilling, reaming and milling applications TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks HYPERION CUSTOM-MADE INSERT BLANKS Hyperion manufacturers
More informationHigh speed end milling of AISI 304 stainless steel using new geometrically developed carbide inserts
High speed end milling of AISI 34 stainless steel using new geometrically developed carbide inserts K.A. Abou-El-Hossein, Z. Yahya Department of Mechanical Engineering, Universiti Tenaga Nasional, 49,
More informationGeneral Purpose Drill Section 2018 Master Catalog
General urpose Drill Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance
More informationAnalysis of Cutting Forces in High Speed Turning of Inconel 718 by using Ceramic Tools
International Conference on Multidisciplinary Research & Practice P a g e 17 Analysis of Cutting Forces in High Speed Turning of Inconel 718 by using Ceramic Tools Ganesh. S. Sonawane 1 1 PG Student, Mechanical
More informationMULTI RESPONSE OPTIMIZATION OF PROCESS PARAMETERS FOR EDM OF COPPER AND HIGH SPEED STEEL
MULTI RESPONSE OPTIMIZATION OF PROCESS PARAMETERS FOR EDM OF COPPER AND HIGH SPEED STEEL B Suneel Kumar* 1,P satish kumar 2 and Ch v s parameswra rao 3 1,2,3 PBR Visvodaya Institute of Technology and Science,
More informationAn Approach towards Machining of GFRP Using Alumina Based Cutting Tools
An Approach towards Machining of GFRP Using Alumina Based Cutting Tools Mohit Mittal, Mahesh Kumar, Ranjeet Sharma Department of Mechanical Engineering, BSAITM Faridabad * Corresponding author. Tel.:+91-9971698741;
More informationCarbide Modular Shrink System
Carbide Modular Shrink System Insert Shrink Fit HEA Shrink Fit SHANK Type Code Tool imensions imensions Ø1 Tool Ø1 VB, VRBS CHTAV-0250-0.460 1.700 0.879 CHTAV-0312-0.460 1.700 0.827 TO, HF, FB, BS, MB,MBT,
More informationEffect of Ageing on the Tribological Behavior of Inconel 690 Using Taguchi s Method
American Journal of Materials Science 2016, 6(4A): 25-30 DOI: 10.5923/c.materials.201601.05 Effect of Ageing on the Tribological Behavior of Inconel 690 Using Taguchi s Method Joel Immanuel Concessao 1,*,
More informationDevelopment of New Grade SUMIBORON BN7000 for Cast Iron and Ferrous Powder Metal Machining
SPECIAL ISSUE Development of New SUMIBORON for Cast Iron and Ferrous Powder Metal Machining Yusuke Matsuda*, Katsumi OKaMura, shinya uesaka and tomohiro FuKaYa SUMIBORON P (polycrystalline cubic boron
More informationYour Parts Our Competence in High-Performance Machining
SPK Cutting Tool Division on cast iron and hardened steel Your Parts Our Competence in High-Performance Machining Your Parts Our Competence Engineering the king of disciplines Engineering combines cutting
More informationKonda Industry Co., Ltd
Reputation ctuality Innovation High efficiency Konda Industry Co., Ltd Konda Industry Co., Ltd is a comprehensive enterprise established in 1997, specialized in machinery and drills etc. ll these products
More informationCUTTING TOOLS 8000 DISTRIBUTED BY SPARK PLUGS (USA), INC. NTK
CUTTING TOOLS P R O D U C T G U I D E 8000 Insert Grade Information BIDEMICS SERIES JX1 / JX3 JP2 CERAMIC-SILICON NITRIDE SERIES SX6, SP9 Si3N4 Type SX3 JX1/JX3 are made of an advanced composite cutting
More informationMarco Boccadoro GFMS Head of EDM Research & Innovation. WEDM technology : is a quantum leap in the process performance still possible?
Marco Boccadoro GFMS Head of EDM Research & Innovation WEDM technology : is a quantum leap in the process performance still possible? Table of Contents Introduction WEDM: state of the art The progress
More informationFlash Gap Optimization in Precision Blade Forging
Flash Gap Optimization in Precision Blade Forging S. Javid Mirahmadi MAPNA Group, R&D Department, Tehran, Iran Email: mirahmadi_j@mapnagroup.com Mohsen Hamedi Faculty of Mechanical Engineering, University
More informationPRIMARY GRADES TURNING TURNING / INSERTS / INTRODUCTION TO CARBIDE INSERTS
/ ISERTS / ITRODUCTIO TO CARBIDE ISERTS PRIMARY GRADES group PVD Coated grades Carbide CVD Ceramics CB PCD Uncoated grades Carbide Cermet P M K S H P01 P05 P10 P15 P20 P25 P30 P35 P40 P45 P50 M01 M05 M15
More informationStudy on the Cutting Temperature of Serrated Chip while Machining Titanium Alloy TC4 Dong LIU
2016 International Conference on Applied Mechanics, Mechanical and Materials Engineering (AMMME 2016) ISBN: 978-1-60595-409-7 Study on the Cutting Temperature of Serrated Chip while Machining Titanium
More informationInvestigation on the Cutting Process of Plasma Sprayed Iron Base Alloys
Key Engineering Materials Online: 2010-09-06 ISSN: 1662-9795, Vols. 447-448, pp 821-825 doi:10.4028/www.scientific.net/kem.447-448.821 2010 Trans Tech Publications, Switzerland Investigation on the Cutting
More information