UTAS Landing Systems Document Approved Processors

Transcription

1 UTAS Landing Systems Document Approved Processors Data Updated: January 30, 2018 Revision Document 200 Text - Summary of Changes Date By NC Original 1/16/2009 CJB A Update to current practice 9/30/2010 CJB B Added second last sentence to 5.0 fourth paragraph, corrected Document 300 reference. 5/23/2012 CJB C Added Notes Tab 9/18/2012 CJB D Entire document: UTAS was Goodrich 4/16/2013 CJB E Added DDTC note 6 to Notes tab, and DDTC data to Listing tab 9/19/2013 CJB F Added STRESS RELIEF note 7 to Notes tab. 12/3/2013 CJB G Added Nadcap Exceptions tab, revised Nadcap reqm'ts table, combined Note 7 into Note 1, revised Note 5. 4/11/2014 CJB H Added Note 7 to Notes tab, paint touch-up to exceptions tab 8/19/2014 CJB Text tab: Content Server was LiveLink, 4.2 added description of J fourth thru sixth tabs Nadcap Exceptions tab: revised CMSP to include the option for 3/13/2015 CJB Nadcap AC7109/8 accreditation for the grinding of HVOF Revised note 6 on Notes tab to differetiate ITAR vs. EAR controlled K military programs for the DDTC license. 4/24/2015 CJB Added Export Ctrl tab. Landing Systems was Landing Gear, LS was LG, LS-SBU-A001- L 4/15/2016 CJB SQA was Document 300. Add ISO17025 for NDT. Revised the naming of the special processes in the SQA database M 6/16/2016 CJB and thus also in Document 200. Revised the naming of the special processes on the N 8/2/2016 CJB "Processes w RPN & Nadcap reqm't" tab. 1.0 Purpose The purpose of this document is to a) identify special processes that require UTAS Landing Systems approval of sources performing the process, and to b) provide a list of approved sources for these processes. The following text is provided for guidance and informational purposes only. In the event of any conflict between this document and LS-SBU-A001-SQA, LS-SBU-A001-SQA takes precedence. 2.0 Applicability The UTAS Landing Systems Document 200 is applicable to suppliers and sub-tier sources of special processes where UTAS Landing Systems LS-SBU-A001-SQA is invoked by reference in UTAS Landing Systems purchase orders or LTA s (Long Term Agreements). No deviation from the requirements contained within this document is permitted unless specifically defined in LS-SBU-A001-SQA, or with written concurrence of UTAS Landing Systems Supplier Quality Assurance. The requirements of this document do not apply for Raw Material purchased to a metallic raw material specification (AMS, MIL, QQ-A, etc.) unless the processor is specifically required by applicable specifications.

2 3.0 Responsibility UTAS Landing Systems Supplier Quality Assurance is responsible for the management and administration of the requirements contained within this document. UTAS Landing Systems approved suppliers of product or services, where LS-SBU-A001-SQA is invoked on the pertinent purchase order or LTA s, are responsible to comply with all applicable requirements contained within this document. UTAS Landing Systems approved processors shall operate under a QMS Quality Management System (i.e. AS9100, Nadcap AQS, ISO17025, ISO9001, etc. as recognized by the applicable Nadcap task group) to obtain and maintain approval status. A QMS registration certificate can serve as proof of compliance; otherwise a LS audit for compliance may be required. UTAS Landing Systems approved processors shall maintain Nadcap certification for those processes that require Nadcap certification. Document 200 defines the processes that require Nadcap certification. 4.0 General 4.1 Reference Documents Document No. LS-SBU-A001-SQA Title LS Supplier and Product Quality Requirements 4.2 Definitions Approved Processor listing: The listing of special processes, individual process specifications, and the sources approved by UTAS Landing Systems to perform these processes to the noted specifications. The UTAS Landing Systems authorized Approved Processor listing is an Excel file located on Content Server. The Excel file has six worksheets. The first worksheet has this requirements text, the second worksheet has the Approved Processor list, the third worksheet has a listing of revisions to the list, the fourth has Notes, the fifth lists which air craft platforms require export control, the sixth lists the controlled processes with their RPN and Nadcap accreditation requirement, and the seventh lists the exceptions to Nadcap accreditation requirements. Approved Processor: A company that has been granted approved status for performing specific special processes as defined by the Approved Processor Listing. This approval is based on compliance to the quality system requirements of this document, and compliance to the listed process specification(s). Approved Supplier: A company that has been granted approved status for supplying product to UTAS Landing Systems based on compliance to the quality management system requirements of LS-SBU- A001-SQA. Special Processes: Only those processes listed on the Processes tab (sixth tab) are considered by UTAS Landing Systems to be controlled special processes that require the entity performing the process to be pre-approved by UTAS Landing Systems. This may include processes that do not require approval by UTAS Landing Systems customers and may not include processes for which approval is required by UTAS Landing Systems customers. 5.0 Approved Processor Listing UTAS Landing Systems Supplier Quality Assurance is responsible for maintaining the Approved Processor listing. The listing is revised as changes are received, reviewed, and approved by the Supplier Quality Assurance organization. The listing as posted on Content Server is refreshed on a periodic basis, approximately monthly, or as often as required. It is the responsibility of approved suppliers to regularly review the listing to determine approval status of sources being used. Document 200 approvals are address or site specific. When special process companies are comprised of more than one physical site, each physical site shall be approved individually by address in order to be contracted for use on LS product. The listing will only contain specifications that are UTAS Landing Systems

3 The listing will only contain specifications that are UTAS Landing Systems s, government issue, or industry standards. UTAS Landing Systems s customers (e.g. Boeing, Lockheed, etc.) do not permit LS to list approval to their specifications; hence their specifications (e.g. BAC s, PS s, 5PTP s, etc.) will not appear in the listing. When UTAS Landing Systems customer controlled processes are required, (e.g. Boeing BAC s, PS s, Lockheed 5PTP s, etc.), selected process sources must be listed in both the UTAS Landing Systems listing as approved for quality system, and also be in the customer s listing (e.g. Boeing D1-4426, Lockheed QCS-001, etc.) as approved for the controlled process. Approval to perform a customer approved special process on LS product is limited to the Special Processes approved for this company as listed on LS Document 200. Refer to LS-SBU-A001-SQA paragraph UTAS Landing Systems approval of a processor does not guarantee product processed by that processor is acceptable and use of approved processors does not relieve the UTAS Landing Systems supplier from the obligation to provide finished product in compliance with purchase order and engineering requirements. Processor, specification, and/or process approvals listed on Doc 200 may be revoked at any time by LS due to various reasons that include but are not limited to: Nadcap audit failures, lack of work being performed on LS product, processor initiated escapes and/or disclosures, changes in equipment at approved sources (no longer performing certain special processes), relocation of approved sources, site closures at approved sources, modifications to specifications. 6.0 Special Process Specification Requirements Special processes are to be performed to the latest released revision of the noted specification, or to the latest released revision of a noted superseding specification, unless otherwise limited by a) notation on the approved special process listing, or b) purchase order requirements. An index of specifications and revisions applicable to product being manufactured to meet UTAS Landing Systems requirements is available on Content Server. It is the responsibility of the supplier to review the index and revision log to the extent and frequency needed to ensure compliance to the listed revision levels of the noted specifications. Should a UTAS Landing Systems customer controlled specification have a formally released revision later than noted on the index, use of the later revision is acceptable. The use of a previous revision than that listed on the UTAS Landing Systems index is not acceptable, unless authorized by written concurrence by UTAS Landing Systems Supplier Quality Assurance prior to any performance of the special process to the previous revision requirements. 7.0 Processor Approval Process Approval of a new processor, or approval of additional specification(s) and/or additional processes for a processor already approved, is only considered when either a UTAS Landing Systems facility or an LS approved supplier is requesting the source s approval. Requests for approval must be made in writing to Suppy Chain Management using form LS DIV SQA FORM Request for Processor Approval (available on Content Server) stating the processor s company information and listing the processes the supplier is requesting the processor to support. Due to various reasons, including resource limitations, a request for approval may be denied; or only partially approved. UTAS Landing Systems will perform periodic surveillance of approved processors as deemed necessary to grant and/or maintain approval status.

4 Document 200 Approved Processors Proc # DDTC Exp Date See Note 6 PROCESSOR (as of January 30, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) AQS - QUALITY SYSTEM AC P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP01 - COATING, PAINT APPLICATION MIL-F P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP11 - CONVERSION COATING, ALUMINUM E.S P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP12 - PASSIVATION AMS P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) CP12 - PASSIVATION E.S P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) NDT - INSPECTION, LIQUID PENETRANT ASTM-E P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) NDT - INSPECTION, MAGNETIC PARTICLE CPC P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) SE - SHOT PEEN AMS P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas (316) SE - SHOT PEEN CPC AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 AQS - QUALITY SYSTEM AS AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP01 - COATING, DRY FILM MIL-PRF AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP01 - COATING, DRY FILM MM AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP01 - COATING, PAINT APPLICATION MIL-F AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP01 - COATING, PAINT APPLICATION MM AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP07 - IVD, ALUMINUM AMS AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP07 - IVD, ALUMINUM MIL-DTL AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP07 - IVD, CADMIUM AMS-C AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP07 - IVD, CADMIUM CPC AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP07 - IVD, CADMIUM MM AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP11 - CONVERSION COATING, ALUMINUM MM AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP12 - PASSIVATION AMS AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP13 - PLATING, BRUSH CADMIUM LGPS AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 CP13 - PLATING, BRUSH CADMIUM MIL-STD AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 HT - STRESS RELIEF AMS-2759/ AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 NDT - INSPECTION, LIQUID PENETRANT ASTM-E AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E AAA Plating & Inspection, Inc. 424 Dixon Street Compton CA USA Mike Kegley (310) x223 NDT - INSPECTION, MAGNETIC PARTICLE CPC Aaxon Labs, Inc Murray Ave Fort Worth TX USA Gary Brothers AQS - QUALITY SYSTEM AC7004 MPI per BAC5424, FPI per BAC5423 and Passivate per BAC5625 only. 947 Aaxon Labs, Inc Murray Ave Fort Worth TX USA Gary Brothers CP12 - PASSIVATION AMS Aaxon Labs, Inc Murray Ave Fort Worth TX USA Gary Brothers NDT - INSPECTION, LIQUID PENETRANT ASTM-E Aaxon Labs, Inc Murray Ave Fort Worth TX USA Gary Brothers NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Abrasive Finishing Co S. Main St. Gardena CA USA Mike Demke (310) AQS - QUALITY SYSTEM AC Abrasive Finishing Co S. Main St. Gardena CA USA Mike Demke (310) SE - SHOT PEEN AMS Abrasive Finishing Co S. Main St. Gardena CA USA Mike Demke (310) SE - SHOT PEEN CP Abrasive Finishing Co S. Main St. Gardena CA USA Mike Demke (310) SE - SHOT PEEN LGPS Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote AQS - QUALITY SYSTEM AS Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote HT - HEAT TREAT AMS-2759/ Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote HT - HEAT TREAT AMS-2759/ Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote HT - HEAT TREAT AMS-2759/ Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote HT - HEAT TREAT AMS Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote HT - HEAT TREAT AMS Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote HT - HEAT TREAT AMS-H Accurate Brazing 36 Cote Ave Goffstown NH USA Dave Cote WLD - BRAZING AMS Acuren Inspection, Inc. 705 Albany Street Dayton OH USA Chad Schmidt AQS - QUALITY SYSTEM ISO Acuren Inspection, Inc. 705 Albany Street Dayton OH USA Chad Schmidt NDT - INSPECTION, LIQUID PENETRANT ASTM-E Acuren Inspection, Inc. 705 Albany Street Dayton OH USA Chad Schmidt NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) AQS - QUALITY SYSTEM AS Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP01 - COATING, PAINT APPLICATION BR Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP01 - COATING, PAINT APPLICATION LGPS Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP01 - COATING, PAINT APPLICATION MIL-F Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP01 - COATING, PAINT APPLICATION MM Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP09 - PLATING, COPPER AMS Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP11 - CONVERSION COATING, ALUMINUM MIL-DTL Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP12 - PASSIVATION AMS-2700 Type 2 and 6 solutions Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) CP13 - PLATING, BRUSH CADMIUM MIL-STD Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) HT - STRESS RELIEF AMS-2759/11 Ovens certified to only 400 F maximum; no Boeing product permitted Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) NDT - INSPECTION, LIQUID PENETRANT ASTM-E Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) NDT - INSPECTION, MAGNETIC PARTICLE CPC Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio (631) NDT - INSPECTION, MAGNETIC PARTICLE MM AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang AQS - QUALITY SYSTEM AS AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP01 - COATING, DRY FILM MIL-PRF AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP01 - COATING, PAINT APPLICATION MIL-F AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP09 - PLATING, CHROME AMS AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP09 - PLATING, CHROME AMS-QQ-C AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP09 - PLATING, CHROME E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP09 - PLATING, THIN DENSE CHROME AMS AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP10 - ELECTROLESS PLATING, NICKEL AMS AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP11 - CONVERSION COATING, ALUMINUM E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP11 - CONVERSION COATING, ALUMINUM MIL-DTL AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP12 - PASSIVATION AMS AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP12 - PASSIVATION ASTM-A AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang CP12 - PASSIVATION E.S Page (4) of (111)

5 Document 200 Approved Processors Proc # DDTC Exp Date See Note 6 PROCESSOR (as of January 30, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations 1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT AMS-2759/ AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT AMS-2759/ AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT AMS-2759/ AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT AMS-2759/ AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT AMS AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT AMS-H AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - HEAT TREAT E.S AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang HT - STRESS RELIEF AMS-2759/ AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang NDT - INSPECTION, LIQUID PENETRANT ASTM-E AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli AQS - QUALITY SYSTEM AS AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP02 - TEMPER ETCH INSPECTION MIL-STD AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 I, IB 932 AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP09 - PLATING, CHROME AMS AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP09 - PLATING, CHROME AMS-QQ-C AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP09 - PLATING, CHROME LGPS AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP11 - CONVERSION COATING, ALUMINUM MIL-DTL AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli CP12 - PASSIVATION AMS AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli HT - HEAT TREAT AMS AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli HT - HEAT TREAT AMS-2759/3 932 AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli HT - HEAT TREAT AMS-2759/5 932 AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli HT - HEAT TREAT AMS-H AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli NDT - INSPECTION, LIQUID PENETRANT ASTM-E AECC Xi an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) AQS - QUALITY SYSTEM AC Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) NDT - INSPECTION, LIQUID PENETRANT ASTM-E Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) NDT - INSPECTION, MAGNETIC PARTICLE CPC Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) NDT - INSPECTION, RADIOGRAPHIC ASTM-E Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley (905) NDT - INSPECTION, RADIOGRAPHIC MMC Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) AQS - QUALITY SYSTEM AS Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-2759/1 31 Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-2759/2 31 Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-2759/3 31 Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-2759/4 31 Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-2759/5 31 Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-H Aerocraft Heat Treating Co., Inc Minnesota Ave. Paramount CA USA Juan Tejeda (562) HT - HEAT TREAT AMS-H Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 AQS - QUALITY SYSTEM AS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP01 - COATING, PAINT APPLICATION LGPS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP01 - COATING, PAINT APPLICATION MIL-F Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3 40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2 40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric Acid LGPS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP09 - PLATING, CADMIUM-TITANIUM LGPS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP09 - PLATING, ZINC NICKEL AMS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP09 - PLATING, ZINC NICKEL LGPS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP12 - PASSIVATION AMS Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 CP12 - PASSIVATION ASTM-A Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang x206 HT - HEAT TREAT AMS-2759/11 APPROVED FOR STRESS RELIEF ONLY Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) AQS - QUALITY SYSTEM AC Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) NDT - INSPECTION, LIQUID PENETRANT ASTM-E Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) NDT - INSPECTION, MAGNETIC PARTICLE CPC Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) NDT - INSPECTION, ULTRASONIC AMS-STD Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier (860) NDT - INSPECTION, ULTRASONIC CPC Aerospace Welding Inc. (California) 2035 Granville Ave. Los Angeles CA USA John Green (310) AQS - QUALITY SYSTEM AC Aerospace Welding Inc. (California) 2035 Granville Ave. Los Angeles CA USA John Green (310) WLD - WELDING AWS D Aerospace Welding Inc. (California) 2035 Granville Ave. Los Angeles CA USA John Green (310) WLD - WELDING ISO Aerospace Welding Inc. (California) 2035 Granville Ave. Los Angeles CA USA John Green (310) WLD - WELDING MIL-W-6873 Part number only Aerospace Welding Inc. (Quebec) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa AQS - QUALITY SYSTEM AS Aerospace Welding Inc. (Quebec) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa CP01 - COATING, PAINT APPLICATION MIL-PRF For MRO work only Aerospace Welding Inc. (Quebec) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa CP11 - CONVERSION COATING, ALUMINUM MIL-DTL Aerospace Welding Inc. (Quebec) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa NDT - INSPECTION, LIQUID PENETRANT ASTM-E Aerospace Welding Inc. (Quebec) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa WLD - WELDING AWS-D Aerosphere Inc. 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine AQS - QUALITY SYSTEM AS Aerosphere Inc. 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine SE - SHOT PEEN AMS Aerosphere Inc. 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine SE - SHOT PEEN LGPS AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 AQS - QUALITY SYSTEM AS AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP01 - COATING, DRY FILM MIL-PRF AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP01 - COATING, PAINT APPLICATION MIL-F AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP07 - IVD, ALUMINUM AMS-2427 MRO work only 48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP07 - IVD, ALUMINUM MIL-DTL MRO work only 48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, COPPER AMS AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, SILVER ASTM-B AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP09 - PLATING, TIN ASTM-B AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Also capable of Type II (non-hexavalent) chromate conversion. 48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP12 - PASSIVATION AMS AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 CP12 - PASSIVATION ASTM-A AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio (905) ext 304 HT - STRESS RELIEF AMS-H AGC AeroComposites - Hayden N. Aero Drive Hayden ID USA Ron Curry AQS - QUALITY SYSTEM AS 9100 Approval supports manufacture and processing of 65B70327 to Boeing specifications. 12 AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary (818) AQS - QUALITY SYSTEM AC AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary (818) CP02 - TEMPER ETCH INSPECTION MIL-STD AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary (818) CP09 - PLATING, CHROME AMS-QQ-C AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary (818) CP09 - PLATING, CHROME E.S AIM Aerospace Sumner Inc Fryar Ave. Sumner WA USA Ken Fagan AQS - QUALITY SYSTEM AS 9100 Flame Spray Aluminum Coating per BAC 5056 only. Page (5) of (111)

6 Document 200 Approved Processors Proc # DDTC Exp Date See Note 6 PROCESSOR (as of January 30, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations AIM Aerospace Sumner Inc Fryar Ave. Sumner WA USA Ken Fagan COMP - COMPOSITES N/A Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill ,QM: AQS - QUALITY SYSTEM AS 9100 As per contractual and engineering drawing requirements, including BAC Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill ,QM: CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Limited to the use of the Alodine 1132 felt tipped marker type materials to local areas only. No Boeing D approval Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill ,QM: CP13 - PLATING, BRUSH CADMIUM LGPS-1102 No Boeing D approval Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill ,QM: CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 No Boeing D approval Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill ,QM: NA - ROLLER BURNISHING BR-163 Approved for holes from " to 2.963". 58 Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 AQS - QUALITY SYSTEM AC Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 CP01 - COATING, PAINT APPLICATION MIL-F Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 58 Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 CP11 - CONVERSION COATING, ALUMINUM MM Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 NDT - INSPECTION, LIQUID PENETRANT ASTM-E Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 NDT - INSPECTION, MAGNETIC PARTICLE CPC Aircraft X-Ray Laboratories, Inc PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez (323) x112 NDT - INSPECTION, RADIOGRAPHIC ASTM-E Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell AQS - QUALITY SYSTEM AC Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT AMS-2759/ Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT AMS-2759/ Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT AMS-2759/ Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT AMS-2759/ Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT AMS Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT AMS-H Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - HEAT TREAT E.S As per E.S Akron Steel Treating Company 336 Morgan Ave. Akron OH USA Steven Powell HT - STRESS RELIEF AMS-2759/ A-Lab Corporation 3050 Dryden Rd. Dayton OH USA John Williams AQS - QUALITY SYSTEM ISO A-Lab Corporation 3050 Dryden Rd. Dayton OH USA John Williams NDT - INSPECTION, LIQUID PENETRANT ASTM-E A-Lab Corporation 3050 Dryden Rd. Dayton OH USA John Williams NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E A-Lab Corporation 3050 Dryden Rd. Dayton OH USA John Williams NDT - INSPECTION, RADIOGRAPHIC ASTM-E Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) AQS - QUALITY SYSTEM AC Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) HT - HEAT TREAT AMS Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) HT - HEAT TREAT AMS Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) HT - HEAT TREAT AMS Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) HT - HEAT TREAT E.S Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) HT - HEAT TREAT E.S Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver (330) HT - HEAT TREAT MIL-H All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 AQS - QUALITY SYSTEM AS All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP01 - COATING, DRY FILM AS All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP01 - COATING, DRY FILM MIL-PRF All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP01 - COATING, PAINT APPLICATION MIL-F All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP02 - TEMPER ETCH INSPECTION MM All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP12 - PASSIVATION AMS All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 CP12 - PASSIVATION ASTM-A All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 HT - STRESS RELIEF AMS-2759/ All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 NDT - INSPECTION, LIQUID PENETRANT ASTM-E All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 NDT - INSPECTION, MAGNETIC PARTICLE CPC All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) (714) x127 NDT - INSPECTION, MAGNETIC PARTICLE MM Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 AQS - QUALITY SYSTEM AS Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP01 - COATING, DRY FILM AS Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP01 - COATING, DRY FILM MIL-PRF Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP01 - COATING, DRY FILM MM Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP01 - COATING, PAINT APPLICATION LGPS Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP01 - COATING, PAINT APPLICATION MIL-F Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) CP Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP11 - CONVERSION COATING, ALUMINUM E.S Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN AMS Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP11 - CONVERSION COATING, STEEL, PHOSPHATE MANG/ZN MIL-DTL Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP12 - PASSIVATION AMS Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP12 - PASSIVATION ASTM-A Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg (330) x3443 CP12 - PASSIVATION E.S Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR AQS - QUALITY SYSTEM AS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CMSP - GRINDING, CHROME LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CMSP - GRINDING, CHROME MIL-STD Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CMSP - GRINDING, HVOF LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP01 - COATING, PAINT APPLICATION LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP01 - COATING, PAINT APPLICATION MIL-F Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP02 - TEMPER ETCH INSPECTION AMS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP02 - TEMPER ETCH INSPECTION LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP02 - TEMPER ETCH INSPECTION MIL-STD Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Chromic acid anodize TYPE IB, CLASS 1 (Low Voltage Process) 74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CADMIUM-TITANIUM LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CADMIUM-TITANIUM MIL-STD Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CHROME LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP09 - PLATING, CHROME MIL-STD Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP10 - ELECTROLESS PLATING, NICKEL AMS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP10 - ELECTROLESS PLATING, NICKEL LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP11 - CONVERSION COATING, ALUMINUM MIL-DTL Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP12 - PASSIVATION AMS-2700 Solution type VI, VIII 74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP12 - TITANIUM CLEANING LGPS Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR CP13 - PLATING, BRUSH CADMIUM LGPS-1102 Page (6) of (111)