INVICTUS BODY JEWELRY
|
|
|
- Hollie Morris
- 6 years ago
- Views:
Transcription
1 QUALITY INTERNALLY THREADED TITANIUM INSERTION JEWELRY INVICTUS BODY JEWELRY Quality Without Compromise MILL CERTIFICATE 9/8/2017
2 BAOJI CITY JINXIU RARE METALS LTD QUALITY CERTIFICATION Certificate No Contract No. Product Designation No LOT No. Condition Size(mm) Net Weight Specification 07.5x JX Titanium Bar Ti6Al4V ELI JXTD M 04.0x ASTM F x ob a0.2 ob ljj ak HB(d) Tensile Test Sample Condition Tensile Strength Yield Strength Elongation [MPa] 0.2%[MPa] [%] Reduction area[¾] [J/cm 2 ] [mm] Bend Test M I I I I Position Chemical Composition ( (%) Top Middle Ti Remainder Remainder Fe C N H 0 Al V Others Each<0.10 I I I I I I I Total<0.40 Note Stamp \Wil *, ill1imu Inspector: Xiao Gang Reviewer: Wang Yang Date:July 7,2016
3 September 8, 2017 Date Submitted: 9/6/ PO Number: NA XRF Assay Composition Style number: TILI801 Date Analyzed: 9/8/2017 Sample Desc.: Small Bars with Round Ball Analyzed by: ME Sample Date: 9/5/2017 Titanium %/wt. Pass Aluminum %/wt. Vanadium %/wt. Iron %/wt. The chemical composition for Ti 6Al 4V Eli Alloy is specified as 88-91% Titanium, % Aluminum, After grinding test results indicate the approximate assay composition of the substrate base metal only.
4 September 8, 2017 Date Submitted: 9/6/ PO Number: NA XRF Assay Composition Style number: TICL5 Date Analyzed: 9/8/2017 Sample Desc.: Casting with Five Stones Analyzed by: ME Sample Date: 9/5/2017 Titanium %/wt. Pass Aluminum %/wt. Vanadium %/wt. Iron %/wt. The chemical composition for Ti 6Al 4V Eli Alloy is specified as 88-91% Titanium, % Aluminum, After grinding test results indicate the approximate assay composition of the substrate base metal only.
5 Mark Hollis December 14, 2016 Date Submitted: 12/13/ RR PO Number: NA Assay Composition Style number: NA Date Analyzed: 12/14/2016 Sample Desc.: Samples Analyzed by: ME Sample Date: 12/09/2016 Titanium %/wt. Pass Aluminum %/wt. Vanadium %/wt. Iron %/wt. The chemical composition for Ti 6Al 4V Eli Alloy is specified as 88-91% Titanium, % Aluminum, After grinding test results indicate the approximate assay composition of the substrate base metal only.
6 December 22, 2016 Date Submitted: 12/20/ PO Number: NA Assay Composition Style number: TIBI4921 Date Analyzed: 12/22/2016 Sample Desc.: Bar Analyzed by: ME Sample Date: 12/19/2016 Titanium %/wt. Pass Aluminum %/wt. Vanadium %/wt. Iron %/wt. The chemical composition for Ti 6Al 4V Eli Alloy is specified as 88-91% Titanium, % Aluminum,
7 December 22, 2016 Date Submitted: 12/20/ PO Number: NA Assay Composition Style number: TIBI451 Date Analyzed: 12/22/2016 Sample Desc.: Bar Analyzed by: ME Sample Date: 12/19/2016 Titanium %/wt. Pass Aluminum %/wt. Vanadium %/wt. Iron %/wt. The chemical composition for Ti 6Al 4V Eli Alloy is specified as 88-91% Titanium, % Aluminum,
8 December 22, 2016 Date Submitted: 12/20/ PO Number: NA Assay Composition Style number: TICI421 Date Analyzed: 12/22/2016 Sample Desc.: Bar Analyzed by: ME Sample Date: 12/19/2016 Titanium %/wt. Pass Aluminum %/wt. Vanadium %/wt. Iron %/wt. The chemical composition for Ti 6Al 4V Eli Alloy is specified as 88-91% Titanium, % Aluminum,
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
Electron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications Abstract Introduction The Electron Beam Melting Process
Electron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications R.S. Kircher, A.M. Christensen, K.W. Wurth Medical Modeling, Inc., Golden, CO 80401 Abstract The Electron Beam Melting (EBM)
Superplastic Forming Properties of TIMETAL 54M
Superplastic Forming Properties of TIMETAL 54M October 2010 Yoji Kosaka and Phani Gudipati Henderson Technical Laboratory Titanium Metals Corporation 1 Outline Brief Introduction of TIMETAL 54M (Ti-54M)
AEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION Licensed to Juan Rodriguez AMS 5754M Issued MAY 1954 Revised AUG 2007 Superseding AMS 5754L Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni
Direct Powder Rolling (DPR) of Titanium. Light Metals Flagship D.Cantin, P.Kean, N.A. Stone, R.Wilson, M.A. Gibson, D.Ritchie, R.
Direct Powder Rolling (DPR) of Titanium. Light Metals Flagship D.Cantin, P.Kean, N.A. Stone, R.Wilson, M.A. Gibson, D.Ritchie, R. Rajakumar Titanium 2010 Orlando, Florida 3-6 October 2010 Manufacture of
ROLLED STEEL WITH ENHANCED STRENGTH
U S S R S T A T E S T A N D A R D ROLLED STEEL WITH ENHANCED STRENGTH GENERAL SPECIFICATIONS GOST 19281 89 Official Edition USSR STATE COMMITTEE FOR PRODUCT QUALITY MANAGEMENT AND STANDARDS Moscow UDC
- HSS-Blade (EOS art.-no ) - 90 µm mesh for powder sieving recommended (EOS art.-no ) - Argon atmosphere
EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is a aluminium metal alloy powder intended for processing on EOS DMLS systems. This document provides information and data for parts built using EOS Aluminium
HOT-ROLLED COIL. Contents. 1. Company Profile 2
HOT-ROLLED COIL Contents 1. Company Profile 2 2. Integrated Steel Mill Instruction 4 3. Typical Specification 5 3.1 Chemical Compositions & Mechanical Properties 5 3.2 Tolerances 11 4. Available Manufacturing
material specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
For more information, please contact: Andrew Setter randy Peck
BABBITT ALLOYS For more information, please contact: Andrew Setter asetter@behrim.com 815-987-2723 randy Peck rpeck@behrim.com 815-987-2708 The Babbitt Division of Behr Iron & Metal is one of North America
ATI 45Nb Alloy. ATI 45Nb Alloy. Technical Data Sheet. Titanium Alloy
ATI 45Nb Alloy Titanium Alloy INTRODUCTION Originally developed for application as an aerospace alloy because of its relative ease of formability, high strength and ductility at temperatures up to 427
Ferrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons
Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape
PSection P. Sec. P Page 1
PSection P CHEMICAL ANALYSES OF STANDARD SIZES STANDARD METALS AND DESIGNATION SYSTEMS... 2 EFFECTS OF COMMON ALLOYING ELEMENTS IN STEEL....... 3-4 DESIGNATION OF CARBON STEELS........................
VDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
The Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging
The Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging Zixing Wang 1, Dianhua Zhou 1, Qun Deng 2, Guosheng Chen 1, Wei Xie 1 1 Special Steel R & D Center of Special Steel Business
Magnetic De-burring & Polishing Machine
Magnetic De-burring & Polishing Machine De-burring, Polishing, Cleaning Precise magnetic pins with best grinding effects www.earth-chain.com.tw Deburr Small Parts With Swarming Stainless Pins Magnetic
COLD ROLLED STEEL S. Automotive. Appliances. Construction. Lighting. Office Furniture
COLD ROLLED STEEL S Automotive Appliances Construction Lighting Office Furniture COLD ROLLED STEELS provide excellent thickness and flatness tolerances, surface finish, and press formability. AK Steel
Molybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
HOT DIP GALVANNEALED STEEL
HOT DIP GALVANNEALED STEEL Construction Auto Body Panels Electrical Enclosures HOT DIP GALVANNEALED STEEL, known as ZINCGRIP GA Steel, is continuously coated on both sides with a zinc-iron (Zn-Fe) alloy.
Development of ATI 425 Alloy Flat Rolled Products ITA 2010
Development of ATI 425 Alloy Flat Rolled Products ITA 2010 Orlando FL October 5, 2010 2010 ATI Luis Ruiz-Aparicio, PhD Outline ATI 425 Alloy Introduction Cold-Rolled & Annealed Coil Processing Mechanical
CORROSION-RESISTANT ALLOYS
CORROSION-RESISTANT ALLOYS HASTELLOY B-3 alloy A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded condition and excellent thermal stability. Contents
Chlorimet 2 and 3. DC2 and DC3. Bulletin A/3k
Chlorimet 2 and 3 DC2 and DC3 Bulletin A/3k DC2 & DC3 Introduction Chlorimet 2 Chlorimet 2 and Chlorimet 3 are Flowserve developed Mo-Ni and Cr-Mo-Ni alloys that have been in use since the early 1950s.
The Effect of Niobium and Molybdenum Co-Addition on Bending Property of Hot Stamping Steels
China Steel Technical Report, No. 29, Jui-Fan pp.1-7, Tu, (2016) Kuo-Cheng Yang, Lung-Jen Chiang and Wei-Jen Cheng 1 The Effect of Niobium and Molybdenum Co-Addition on Bending Property of Hot Stamping
HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986)
For Comments Only Draft Indian Standard Doc: MTD 4(4939) HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986) ICS 77.140.50 Not to be reproduced
ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
Analysis of Cast Iron Using Shimadzu PDA-7000
Analysis of Cast Iron Using Shimadzu PDA-7000 C112-0510M The analysis of low and high alloy cast iron by optical emission spectrometry is presented. Cast iron alloys are classified by their mechanical
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service 1
Designation: A 234/A 234M 02 Used in USDOE-NE Standards An American National Standard Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature
Hot Rolled. AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades.
Hot Rolled STEELs P r o d u c t D ata B u l l e t i n AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades. Consistency from coil
MILITARY HANDBOOK METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES
1 DECEMBER 1998 MILITARY HANDBOOK METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES AMSC N/A FSC 1560 DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. FOREWORD
Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University
12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required
DIN WELDABLE NORMALIZED FINE GRAIN STRUCTURAL STEELS
DIN 17102 WELDABLE NORMALIZED FINE GRAIN STRUCTURAL STEELS 1. Field of application 1.1 This standard applies hot rolled products in the form of flats (plate, strip, wide flats), sections and bars of weldable
Research on Pickling Hot Rolled Commercial Pure Titanium. Strip on the Continuous Pickling Line of Special Steel
Research on Pickling Hot Rolled Commercial Pure tanium Strip on the Continuous Pickling Line of Special Steel Authors: Wang Chuang (BaoSteel Special Steel Business Unit, Engineer) Hao Renguan (BaoSteel
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process 1
: A 875/A 875M 05 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process 1 This standard is issued under the fixed designation A 875/A 875M; the number immediately
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
NiSPAN-C 902 (Alloy 902), UNS N09902
NiSPAN-C 902 (Alloy 902), UNS N09902 AMS 5221, AMS 5223, AMS 5225 Alloy 902 Wire Description Alloy 902is a precipitation hardenable nickel-iron with a controllable thermoplastic coefficient which is the
Material data sheet. EOS NickelAlloy IN625. Description
EOS NickelAlloy IN625 EOS NickelAlloy IN625 is a heat and corrosion resistant nickel alloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information
ATTACHMENT 1 FOR QAP1.6 PURCHASING / QUALITY CLAUSES
ATTACHMENT 1 FOR QAP1.6 PURCHASING / QUALITY CLAUSES Date Rev Revision History Approval 4/23/2015 B 8/26/2015 C 8/28/2015 D 4/4/2016 E 4/4/2017 F 6/14/2017 G Complete review and revised Added QPC-027 NTW
A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique
A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique.Satyanarayen 1, Dominic Roystan 2, M.Shreesaravanan 3 Balaguru 4, C.Devanathan 5 1,2,3,4 UG Students,
BIS or used as Amendment to STANDARD comments is 15 Nov. 2008
Doc: MTD 4 (4730) For comments only BUREAU OF INDIAN STANDARDS Modified draft Indian Standard HOT ROLLED CARBON STEEL SHEET AND STRIP (Sixth Revision of IS 1079) ICS 77.140.50 Not to be reproduced without
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube 1
Designation: B 241/B 241M 02 Used in USNRC-RDT standards Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube 1 This standard is issued under the fixed designation
SECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
With Dura-Bar you will be able to:
Dura-Bar Stock List Dura-Bar is an engineered iron designed to meet our customers most critical requirements. It is manufactured to strict process controls that provide world-class quality and uncompromising
3.40 Sketch within a cubic unit cell the following planes: (a) (01 1 ) (b) (112 ) (c) (102 ) (d) (13 1) Solution
3.40 Sketch within a cubic unit cell the following planes: (a) (01 1 ) (b) (11 ) (c) (10 ) (d) (13 1) The planes called for are plotted in the cubic unit cells shown below. 3.41 Determine the Miller indices
3. MECHANICAL PROPERTIES OF STRUCTURAL MATERIALS
3. MECHANICAL PROPERTIES OF STRUCTURAL MATERIALS Igor Kokcharov 3.1 TENSION TEST The tension test is the most widely used mechanical test. Principal mechanical properties are obtained from the test. There
Aluminum Stock Guide.
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Aluminum Stock Guide. 1 New! in this edition of the Aluminum Stock Guide, CBS Part Numbers make ordering easier than
Material data sheet. EOS Titanium Ti64. Description
EOS Titanium Ti64 EOS Titanium Ti64 is a titanium alloy powder intended for processing on EOS DMLS machines. This document provides information and data for parts built using: - EOS Titanium Ti64 powder
Ti 6Al-4V is recommended for use at service temperatures up to approximately 350 C (660 F).
Titanium Alloy Ti 6Al-4V Type Analysis Carbon (Maximum) 0.10 % Titanium Balance Aluminum 5.50 to 6.75 % Vanadium 3.50 to 4.50 % Nitrogen 0.05 % Iron (Maximum) 0.40 % Oxygen (Maximum) 0.020 % Hydrogen (Maximum)
FATIGUE LIFE OF FORGED, HARDENED AND TEMPERED CARBON STEEL WITH AND WITOUT NORMALIZING
FATIGUE LIFE OF FORGED, HARDENED AND TEMPERED CARBON STEEL WITH AND WITOUT NORMALIZING A. Zabett 1*, R. Irankhah 1, M. Miri Disfani 1, I. Zohur Karimi 1, M. Hashemi 2 1- Ferdowsi University of Mashad,
Low Cost Titanium by Advanced Powder. Distinguishing the Current Opportunities from
Low Cost Titanium by Advanced Powder Manufacturing Technology Distinguishing the Current Opportunities from the Wishful Thinking Titanium 2007 ITA Conference & Exhibition Oct 7-9 Orlando, FL Stanley Abkowitz
Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire 1
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because it may not be technically
Application and importance of copper and copper powder on powder metallurgy field
Application and importance of copper and copper powder on powder metallurgy field In recent years, powder metallurgy scholars have paid more attention to materials that have nanometer and composite feature.
International Conference on Material Science and Application (ICMSA 2015)
International Conference on Material Science and Application (ICMSA 2015) Influence of Er on Microstructure and Properties of Al-0.2%Zr-0.06%B Heat-resistant Alloy Conductor Prepared by Continuous ECAE
Improvement in mechanical properties of C300 maraging steel by application of VAR process
ARTICLE IN PRESS Vacuum 82 (28) 21 28 www.elsevier.com/locate/vacuum Improvement in mechanical properties of C3 maraging steel by application of process Seyed Reza Elmi Hoseini, Hosein Arabi, Hekmat Razavizadeh
CHAPTER III METHODS AND MATERIALS
CHAPTER III METHODS AND MATERIALS 3.1: Tensile Tests 3.1.1: Introduction The first phase of testing for the experimental program, was to conduct tensile tests of No. 4, No. 5, and No. 6 nominal diameter
Insert: LNMX Maximum Depth of Cut:.300"
LNMX Milling Program The newly developed LNMX family of milling cutters for square shoulder milling, available in 2 edge lengths, utilizes strong negative inserts giving users 4 cutting edges. Due to the
T Z M r o d ( f u l l y w o r k e d ) PS- I H R 1 0 1
Scope: PLANSEE SE Controlled document acc. to QR-04; this does not apply to hard copies 1. Dimensions and s 1.1 and guaranteed production s ground 0.50-0.99 ± 0.007 1.00-1.99 ± 0.010 2.00-2.99 ± 0.015
BALLISTIC PERFORMANCE OF THIN TITANIUM PLATES. Matthew Burkins
23 RD INTERNATIONAL SYMPOSIUM ON BALLISTICS TARRAGONA, SPAIN 16-20 ABRIL BALLISTIC PERFORMANCE OF THIN TITANIUM PLATES Matthew Burkins U.S. Army Research Laboratory, ATTN: AMSRD-ARL-WM-TA, APG, MD, 21005-5066,
Material data sheet. EOS Titanium Ti64. Description
EOS Titanium Ti64 EOS Titanium Ti64 is a titanium alloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using
A New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
What Are Metal Standards and Why Are They Important?
What Are Metal Standards and Why Are They Important? Table of Content Metallurgy101...3 Pure Metals...3 Component Metals...4 Characteristics of Metal Standards...5 Metal Standards and Testing Standards...6
Investigation of low stress rupture properties in Inconel-718 super alloy
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Investigation of low stress rupture properties in Inconel-718 super alloy Related content - Metal coated fibres and fibre reinforced
ISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel
INTERNATIONAL STANDARD ISO 5832-1 Fourth edition 2007-06-15 Implants for surgery Metallic materials Part 1: Wrought stainless steel Implants chirurgicaux Matériaux métalliques Partie 1: Acier inoxydable
ATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
The Influence of Titanium Properties on the Design and Application of Downhole Oil & Gas Equipment. Mitchell Dziekonski Titanium Engineers, Inc.
The Influence of Titanium Properties on the Design and Application of Downhole Oil & Gas Equipment Mitchell Dziekonski Titanium Engineers, Inc. Joel Ogburn Titanium Engineers, Inc. Titanium alloys have
Steel products for the mining sector.
Steel products for the mining sector Thread bars for rock bolting Rock bolts are steel rod inserted into holes drilled into the roofs or walls of rock formations to provide support to the roofs or sides
PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS
p 1 of 6 UF-1 UF-12 PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGING the test temperature be higher than 20 F ( 29 C). Certification is required. An ultrasonic examination shall be made
TITANIUM ALLOYS FOR ARMOR APPLICATIONS. Matthew Burkins, U.S. Army Research Laboratory
TITANIUM ALLOYS FOR ARMOR APPLICATIONS Matthew Burkins, U.S. Army Research Laboratory Titanium alloys have long been used for reducing system weight in aerospace components. The high cost of titanium,
HOT DIP GALVANIZED STEEL. Agricultural Equipment. Transportation
HOT DIP GALVANIZED STEEL P R O D U C T D ATA B U L L E T I N Auto Body Panels HVAC Appliances Agricultural Equipment Transportation AK Steel s Hot Dip Galvanized Steel, known as ZINCGRIP Steel, is continuously
M.A. Ford Where high performance is the standard. Phone: or
For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and precision in advanced solid carbide
MERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing
MERCHANTS METALS SECTION 32 31 13 COLORBOND CHAIN LINK FENCE AND GATES 2014 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements,
ASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
ISO 3575 INTERNATIONAL STANDARD. Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
INTERNATIONAL STANDARD ISO 3575 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities Fourth edition 2011-01-15 Tôles en acier au carbone galvanisées en continu par immersion
DIVISION: CONCRETE SECTION: REINFORCING STEEL REPORT HOLDER: DEXTRA MANUFACTURING CO., LTD.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2166 Reissued 10/2017 This report is subject to renewal 10/2018. DIVISION: 03 00
The Production of Titanium and Titanium Alloys Using Electron Beam Cold Hearth Single Melt
The Production of Titanium and Titanium Alloys Using Electron Beam Cold Hearth Single Melt David W. Tripp Development Manager, EBSM TIMET Morgantown, PA Titanium 2006 San Diego, CA Introduction Electron
Titanium and titanium alloys. Josef Stráský
Titanium and titanium alloys Josef Stráský Lecture 3: Technological aspects of Ti alloys Pure Ti metallurgy, properties and applications α+β alloys microstructures, metallurgy, heat treatment Ti-6Al-4V
Discover the variety of Metal Powders
Discover the variety of Metal Powders The range of our standard metal powder Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in metal-based
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
The world s first commercial LNG fuel tank made of high manganese austenitic steel
The world s first commercial LNG fuel tank made of high manganese austenitic steel Jiwon Yu 1), Kihwan Kim 1), Do-Won Seo 1), Sung Tae Yun 1), Geon Shin 1), Hyun Kug Lee 2) 1) POSCO 2) Ilshin Marine Transport
Technical Information
Technical Information Material Data Sheet Magnesium Mg KG High performance materials in form and function 2 Magnesium and Magnesium wrought alloys are the ideal material for extremely light components.
Licensed Copy: John May, Powertrain Ltd., February 20, 2002, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS 70-3: Incorporating Amendment Nos. 1 and 2 Specification for Wrought steel for mechanical and allied engineering purposes Part 3: Bright bars for general engineering purposes BS70-3:
The ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
ALUMINUM CASTINGS 300 SERIES (Without Beryllium)
203 American Foundry Society Meets the Requirements of OSHA Standard 29 CFR 90.200 Hazard Communication and EPA Supplier Notification Requirements under Section 33 of the Emergency Planning and Community
SECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
New Generation High Strength High Damage Tolerance 7085 Thick Alloy Product with Low Quench Sensitivity
Proceedings of the 9 th International Conference on Aluminium Alloys (2004) Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd 969 New Generation High Strength
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
SHEET AND COIL. 5MPage 1. 5 Sheet and Coil
SHEET AND COIL ALUMINIZED COIL AND SHEET 5-22 COLD ROLLED COIL AND SHEET General 5-11 Tolerances 5-12 to 5-14 GALVANIZED COIL AND SHEET General 5-15 Chemical Composition 5-16 Weight of Coating 5-17 Tolerances
For more information call (800) Materials Services Copper and Brass Sales. Stainless Steel
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Stainless Steel Service You Can Count On. At thyssenkrupp Materials NA, Copper and Brass Sales, we're committed to being
HASTELLOY B-3 alloy Principal Features
HASTELLOY B-3 alloy Principal Features Exceptional resistance to HCl and H 2 SO 4 and enhanced structural stability HASTELLOY B-3 alloy (UNS N10675) exhibits extremely high resistance to pure hydrochloric,
Resource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
Keeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
MODIFICATION ON STRENGTH AND THERMAL STABILITY OF ALLOY 793
EFFECT OF HEAT TREATMENT AND COMPOSITIONAL MODIFICATION ON STRENGTH AND THERMAL STABILITY OF ALLOY 793 Encai Guo, Fengqin Xu and E.A. Loria Central Iron & Steel Research Institute Beijing, China and Niobium
Effect of Heat Treatment on Microstructure and Mechanical Properties of Medium Carbon Steel
International Journal of Engineering Research and Development ISSN: 2278-067X, Volume 2, Issue 1 (July 2012), PP. 07-13 www.ijerd.com Effect of Heat Treatment on Microstructure and Mechanical Properties
IMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %):
IMPACT Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR IMPACT is a wear resistant steel with a nominal hardness of 340 HBW in delivery condition. DILLIDUR IMPACT is not a constructional
Datasheet for Steel Grades Alloy Steel 12Ni14
P Steel Grade12Ni14 Chemical information,mechanical properties This page is mainly introduced the 12Ni14 Datasheet, including chemical information,mechanical properties, physical properties, mechanical
1-1/2 LB FM7 CND BD ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED
LB57 1-1/2 LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category LB57 Appleton/Oz Gedney Conduit Body, Electro Zinc Plated Dichromate Epoxy Powder Coated
Beta C Spring made from PAM Single Melt Input Stock
Beta C Spring made from PAM Single Melt Input Stock K.O. Yu 1, C.M. Bugle 2 and C. Pepka 3 1. RTI International Metals, Inc., Niles, OH 2. Dynamet Incorporated, Washington, PA 3. Renton Coil Spring Co.,
Yttria Nanoparticle Reinforced Commercially Pure (CP) Titanium
Yttria Nanoparticle Reinforced Commercially Pure (CP) Titanium by Sesh Tamirisa ARL-CR-0680 September 2011 Prepared by FMW Composite Systems, Inc. 1200 W. Benedum Industrial Drive Bridgeport, WV 26330
STOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon