Technical Guide. Adhesive Tapes

Size: px
Start display at page:

Download "Technical Guide. Adhesive Tapes"

Transcription

1 Technical Guide Adhesive Tapes

2 TECHNICAL GUIDE ADHESIVE TAPES Thank you for choosing our products Note: Technical information contained in this catalog may be changed or updated by the manufacturer without notice for the benefit of the excellence, service or presentation of the products. No liability is assumed for the use of this information.

3 ADHESIVE TAPES ADHESIVE TAPES The use of adhesive tapes in the air conditioning, refrigeration, heating and ventilation industries is very extensive, reason why offers the best solution with a wide selection of high quality tapes, whose application ensures satisfactory results. NOMENCLATURE KAT-(X)-(Y)-(ZZ)-(C) (C) = Color: B : Black G : Gray S : Silver (ZZ) = Length in Yards (Y) = Width in Inches (X) = Type: D : Duct Tape A : Aluminum R : Reinforced Aluminum (AT) = Product: Adhesive Tape (K) = Manufacturer : I. GREY DUCT TAPE gray adhesive tape for multiuse ducts, also known as the secret weapon of installers, is manufactured using polyethylene-laminated fabric, sensitive to pressure, and of high adhesive power. It can be used as a moisture barrier avoiding humidity entering pipes, rigid or flexible ducts, and as insulating material in general. Although there are many makes using different materials and adhesives, our product is heat resistant (up to 93 C) to be applied on steam pipes. FEATURES Appropriate for jobs requiring a strong, flexible, waterproof tape of high adhesive power Individually packed in plastic to prevent contact with dust and other pollutants Normally available in dark gray and also in black Thickness: mm Adhesion: 62 oz/inch Tension: 32 lb/inch Feasible elongation: 16% Maximum operating temperature: 93 C T h a n k y o u f o r c h o o s i n g o u r p r o d u c t s Rev

4 ADHESIVE TAPES I. GREY DUCT TAPE (Cont.) Width Length MODEL Metric British/American Metric British/American KAT-D225G 0,051m 2" KAT-D250G 45,72m 50 yds. Standard Color Grey (G) II. SMOOTH ALUMINUM TAPE The smooth aluminum tape is widely used: In thermal insulation works because of its reflection characteristics and heat blocking properties In cable coating as a barrier and electricity conductor In air conditioning and multiuse ducts It is an insulating tape thicker than 25 µm (1 mil) and it is impermeable to oxygen and water FEATURES Appropriate for air conditioning ducts (flexible and rigid), for insulation of cold rooms and water heaters, as ceiling joint sealant or for steam applications, among other uses Individually packed in plastic to prevent contact with dust and other pollutants Aluminum foil of 40 microns (1.7 mil) Acrylic sealing layer for higher resistance to steam and moisture Adhesion: 80 oz/inch Tension: 18 lb/inch Feasible elongation: 5% Maximum operating temperature range: -20 C to +120 C Application temperature range: +10 C to +40 C Width Length MODEL Metric British/American Metric British/American KAT-A225S 0,051m 2" KAT-A250S 45,72m 50 yds. KAT-A325S 0,076m 3" KAT-A350S 45,72m 50 yds. Standard Color T h a n k y o u f o r c h o o s i n g o u r p r o d u c t s Rev

5 ADHESIVE TAPES III. REINFOCED ALUMINUM TAPE The aluminum-reinforced auto-adhesive tape is manufactured with an aluminum foil reinforced with a fiberglass mesh of 2x3 per square inch pattern for a higher tensile strength of the material. It can be used: In thermal insulation jobs because of its reflection characteristics and heat blocking properties In cable coating as a barrier and electricity conductor In air conditioning and multiuse ducts FEATURES Suitable for air conditioner ducts (flexible and rigid), for insulation of cold rooms and water heaters, as ceiling joint sealant or for steam applications, among other uses Individually packed in plastic to prevent contact with dust and other pollutants Aluminum foil of 35 microns (1.5 mil) Acrylic sealant layer for higher resistance to steam and moisture Adhesion: 90 oz/inch Tension: 18 lb/inch Feasible elongation: 2% Maximum operating temperature range: -30 C to +125 C Application temperature range: from +10 C to +40 C Width Length MODEL Metric British/American Metric British/American KAT-R225S 0,051m 2" KAT-R250S 45,72m 50 yds. KAT-R325S 0,076m 3" KAT-R350S 45,72m 50 yds. Standard Color INSTALLATION For a long-term effectiveness, it is recommended to use it on a clean, dry surface free of debris, dust or grease. T h a n k y o u f o r c h o o s i n g o u r p r o d u c t s Rev

6 Notes: ADHESIVE TAPES

7 TECHNICAL GUIDE Thank you for choosing our products

K-FLEX. K-FLEX Tapes. for HVAC and industrial application

K-FLEX. K-FLEX Tapes. for HVAC and industrial application NAME January PRODUCT 2016 Tapes for HVAC and industrial application TAPES INDEX TAPES Pg. 2 ALU Tapes ALU AA CW TAPE Pg. 4 ALU AR CW TAPE Pg. 5 ALU BLACK CW TAPE Pg. 6 FSK FACING TAPE Pg. 7 Special Tapes

More information

Pressure Sensitive Adhesives for HVAC/R, Mechanical and Metal Building Insulation. Tapes, Fasteners & Sealants Product Catalog

Pressure Sensitive Adhesives for HVAC/R, Mechanical and Metal Building Insulation. Tapes, Fasteners & Sealants Product Catalog Pressure Sensitive Adhesives for HVAC/R, Mechanical and Metal Building Insulation Tapes, Fasteners & Sealants Product Catalog HVAC Fastening Systems PRODUCT DESCRIPTION AVAILABLE SIZES ROLLS/CASE ORDER

More information

Mechanical Insulation for Refrigeration Systems

Mechanical Insulation for Refrigeration Systems Mechanical Insulation for Refrigeration Systems INDUSTRIAL REFRIGERATION CONSORTIUM RESEARCH & TECHNOLOGY FORUM MAY 2-3, 2012 Peter Gauchel, President/CEO L&C Insulation Inc. Overview Current trends in

More information

DSC BUILDING 1200 ALTERATIONS OCTOBER 2011 SECTION DUCT INSULATION

DSC BUILDING 1200 ALTERATIONS OCTOBER 2011 SECTION DUCT INSULATION SECTION 230713 DUCT INSULATION PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 233113 Ductwork and Accessories 1.2 REFERENCES A. American Society for Testing and Materials (ASTM): 1. E84-96a Test Method

More information

SECTION HVAC INSULATION

SECTION HVAC INSULATION PART 1 GENERAL 1.1 SUMMARY SECTION 23 07 00 HVAC INSULATION A. Section Includes: 1. Ductwork insulation. 2. Duct liner. 3. Insulation jackets. 4. Equipment insulation 5. Piping system insulation. 6. Insulation

More information

3 Adhesive Transfer Tapes with Adhesive PC

3 Adhesive Transfer Tapes with Adhesive PC 3 Adhesive Transfer Tapes with Adhesive 300 9458 9471 9471PC 9472 9653 9671 9672 9673 9674 Technical Data January, 2006 Product Description 3M Adhesive Transfer Tapes with 3M Adhesive 300 offer excellent

More information

Extreme Sealing Tape

Extreme Sealing Tape Extreme Sealing Tape Technical Data September, 2014 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

High Performance Adhesive Transfer Tapes with Adhesive 200MP

High Performance Adhesive Transfer Tapes with Adhesive 200MP 3 High Performance Adhesive Transfer Tapes with Adhesive 200MP Technical Data December, 2007 Product Description 3M Adhesive 200MP is a popular choice for graphic attachment and membrane switch applications

More information

High Performance Adhesive Transfer Tapes with 3M Adhesive 200MP

High Performance Adhesive Transfer Tapes with 3M Adhesive 200MP 3 High Performance Adhesive Transfer Technical Data March, 2001 Product Description 3M adhesive 200MP is a popular choice for graphic attachment and membrane switch applications because it has excellent

More information

TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets

TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets TOPCOAT Restoration Specifications Fiberglass & MB Granulated Cap Sheets Updated: 1/11 Quality You Can Trust From North America s Largest Roofing Manufacturer! www.gaf.com TOPCOAT Restoration Specifications

More information

SECTION EPOXY TERRAZZO

SECTION EPOXY TERRAZZO SECTION 09402 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to

More information

Spandrel Glass Types and Recommendations

Spandrel Glass Types and Recommendations Introduction Vitro (formerly PPG Industries) has long offered recommendations regarding alternatives for glass spandrel applications. Over the years these recommendations were included in various publications

More information

S OZ. WOVEN POLYETHYLENE F. R. S-3 KLEAR SPAN FR S-6 18 OZ. VINYL COATED POLYESTER (VCP) INNOVATIVE SOLUTIONS PRECISION RELIABILITY

S OZ. WOVEN POLYETHYLENE F. R. S-3 KLEAR SPAN FR S-6 18 OZ. VINYL COATED POLYESTER (VCP) INNOVATIVE SOLUTIONS PRECISION RELIABILITY S-2 5.6 OZ. WOVEN POLYETHYLENE F. R. A 1000 denier tape woven into a fabric and coated 2.2 mil on both sides. An economic, light weight yet durable material for industrial applications for indoor use only.

More information

K-FLEX K-FLEX ST 74 A NEW GENERATION OF INSULATION MATERIALS

K-FLEX K-FLEX ST 74 A NEW GENERATION OF INSULATION MATERIALS K-FLEX 74 A NEW GENERATION OF INSULATION MATERIALS /SK pre-cut pipe insulation with adhesive sheets tubes Elastomeric insulation for all applications, both civil and industrial. Applications: Air-conditioning

More information

High Performance Adhesive Transfer Tapes 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP

High Performance Adhesive Transfer Tapes 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP High Performance Adhesive Transfer Tapes 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Technical Data September 2017 Product Description 3M Adhesive 200MP is a popular

More information

Sheet Metal Connectors, Inc.

Sheet Metal Connectors, Inc. Sheet Metal Connectors, Inc. HVAC ACCESSORY PRICE CATALOG JANUARY 1, 2004 CONTRACTOR PRICES POLYKEN TAPES ELGEN PRODUCTS TEK & ZIP SCREWS DP1010 DUCT SEALANT MINNEAPOLIS, MN ROCKFORD, IL 5850 Main Street

More information

HVAC INSULATION. A. General Requirements for Flexible Elastomeric Insulation: 3. Use pre-molded roll on pipe sizes 3.5" and below.

HVAC INSULATION. A. General Requirements for Flexible Elastomeric Insulation: 3. Use pre-molded roll on pipe sizes 3.5 and below. 230700 HVAC INSULATION PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 232300 Refrigeration B. Section 233100 Air Distribution 1.02 INSULATION A. General Requirements for Flexible Insulation: 1. Use is

More information

For More Information Visit the 3M Adhesive Transfer Tape Web Pages

For More Information Visit the 3M Adhesive Transfer Tape Web Pages For More Information Visit the 3M Adhesive Transfer Tape Web Pages http://solutions.3m.com/wps/portal/3m/en_us/adhesives/tapes/products/~/3m-tape-and-3m- Adhesives/Adhesive-Transfer-Tapes-Double-Coated-Tapes/Adhesive-Transfer-

More information

Air and Vapor Barrier 3015

Air and Vapor Barrier 3015 Air and Vapor Barrier 3015 Technical Data March 2017 Product Description 3M Air and Vapor Barrier 3015 is an air, moisture and water impermeable membrane with an aggressive, high-tack acrylic pressure

More information

TEKTON Flashings and TEKTON Construction Tape

TEKTON Flashings and TEKTON Construction Tape TEKTON Flashings and TEKTON Construction Tape Complete the system with TEKTON Flashings and Construction Tape. It is important to assure a tight building envelope when windows and siding are installed.

More information

LAMINATE. Laminate Panel Systems. ABS Laminating Skins Mat: ABS Plastic Total Thickness: 1mm /.04 Wt: 3.21kg / 7.08lbs

LAMINATE. Laminate Panel Systems. ABS Laminating Skins Mat: ABS Plastic Total Thickness: 1mm /.04 Wt: 3.21kg / 7.08lbs Laminate Panel Systems PANEL SYSTEMS-SKINS-CORES-COMPOSITE MATERIALS-ALUMINUM-FIBERGLASS-ABS-TEXTURED LAMINATE ABS Laminating Skins Mat: ABS Plastic Total Thickness: 1mm /.04 Wt: 3.21kg / 7.08lbs BLACK

More information

This Design guideline contained herein includes the requirements for mechanical insulation at The University of Texas at Austin

This Design guideline contained herein includes the requirements for mechanical insulation at The University of Texas at Austin PART 1: GENERAL 1.01 Purpose: This Design guideline contained herein includes the requirements for mechanical insulation at The University of Texas at Austin 1.02 Scope: A. Extent of mechanical insulation

More information

Weatherproofing & Sealing Systems

Weatherproofing & Sealing Systems Weatherproofing & Sealing Systems Weather Barrier & Waterproofing Residential & Commercial Structures New Construction, Remodeling & Repair Low Slope Roofing Membranes Roofing Underlayments Window & Door

More information

Military Specifications

Military Specifications Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C *MIL-P-997C MIL-P-997D Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset

More information

Military Specifications

Military Specifications Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine

More information

Thermal Management Catalog

Thermal Management Catalog Management Catalog P-THERM Interface Materials Polymer Science, Inc. offers a complete thermal management product line. Our P-THERM Interface Materials are designed to efficiently and effectively aid in

More information

Silica Slit Gasket & Thermal Insulating Tape 1800 F / 982 C: InSilMax Extreme High Temperature, Heat, Flame, Molten Metal & Weld Splatter Resistant

Silica Slit Gasket & Thermal Insulating Tape 1800 F / 982 C: InSilMax Extreme High Temperature, Heat, Flame, Molten Metal & Weld Splatter Resistant Silica Slit Gasket & Thermal Insulating Tape An alternative to asbestos and ceramic based textiles. Highly flexible and minimal shrinkage. High abrasion resistance and tensile strength. Melts above 3000

More information

Specialty Industrial Tapes. adhesive tape solutions...beyond the roll

Specialty Industrial Tapes. adhesive tape solutions...beyond the roll Specialty Industrial Tapes adhesive tape solutions...beyond the roll Servicing Our Customers Beyond the Roll! With more than a century of product innovations in pressure-sensitive adhesive tapes, tesa

More information

Thermal Management Catalog

Thermal Management Catalog Management Catalog P-THERM Interface Materials Polymer Science, Inc. offers a complete thermal management product line. Our P-THERM Interface Materials are designed to efficiently and effectively aid in

More information

Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray

Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray Scotch-Weld Metal Bonder Acrylic Adhesive Preliminary Technical Data Sheet October 2017 Product Description is a high performance, two-part acrylic adhesive that offers excellent shear, peel, and impact

More information

Acrylic adhesive Non-woven fabric* Acrylic adhesive Release liner

Acrylic adhesive Non-woven fabric* Acrylic adhesive Release liner Double-coated adhesive tape Series Outline Nitto No.500 and No.500A series are double-coated adhesive tapes consisting of acrylic adhesive with flexible non-woven fabric. No.500 is suitable for punched

More information

May 8, 2017 ADDENDUM #1. IFB Resin Floor System For Highway Department Central District Building

May 8, 2017 ADDENDUM #1. IFB Resin Floor System For Highway Department Central District Building May 8, 2017 ADDENDUM #1 IFB 17-082 Resin Floor System For Highway Department Central District Building Addendum #1 is being issued to offer an alternate resin flooring system. 096700 FLUID-APPLIED FLOORING

More information

SECTION PIPING INSULATION

SECTION PIPING INSULATION SECTION 23 07 19 PIPING INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Piping insulation for refrigerant piping within building envelope. 2. Furnishing and installation of insulation.

More information

ROOFS ROOFS WALLS FLOORS. Energy efficiency for constructions... Always environment-friendly...

ROOFS ROOFS WALLS FLOORS. Energy efficiency for constructions... Always environment-friendly... PRODUCT CATALOG Energy efficiency for constructions... Always environment-friendly... www.prodexcr.com CONSTRUCTION AREA REFLECTIVE THERMAL INSULATION AD AD= ALUMINUM + ALUMINUM 0,39; 0,19; and 0,11 in

More information

3M Electrically Conductive Adhesive Transfer Tape 9707

3M Electrically Conductive Adhesive Transfer Tape 9707 Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)

More information

BuildingName The Description of the Project P DOCUMENTS

BuildingName The Description of the Project P DOCUMENTS P00000000 0000 DOCUMENTS ARCHITECTURE ENGINEERING AND CONSTRUCTION ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION DIVISION

More information

MECHANICAL AND PHYSICAL PROPRIETIES

MECHANICAL AND PHYSICAL PROPRIETIES Kera-Coat Ceramic Coatings are Special Ceramic Coating defined as a substantially vitreous or glassy inorganic coating bonded to metal by fusion at a temperature above 800 F. In this short abstract we

More information

DATA SHEET CARBON FABRIC

DATA SHEET CARBON FABRIC CARBON FABRIC Carbon fiber, also referred to as graphite fiber, is one of the strongest and stiffest reinforcements available. When properly engineered, carbon fiber advanced composites can achieve the

More information

SECTION HVAC DUCTS AND CASINGS

SECTION HVAC DUCTS AND CASINGS SECTION 23 31 00 HVAC DUCTS AND CASINGS PART 1 -GENERAL 1.1 SUMMARY A. Section includes metal ductwork, nonmetallic ductwork, casing and plenums, buried ductwork, kitchen hood ductwork, duct cleaning.

More information

OptiLiner Banded Liner System, Thermal, Metal Building

OptiLiner Banded Liner System, Thermal, Metal Building PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.

More information

3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series

3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series 3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.

More information

Design & Construction Standards, Revised January

Design & Construction Standards, Revised January PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

FireShield System Specifications Mineral Surface Cap, Mop Granule and Torch Granule APP Cap Sheets

FireShield System Specifications Mineral Surface Cap, Mop Granule and Torch Granule APP Cap Sheets FireShield System Specifications Mineral Surface Cap, Mop Granule and Torch Granule APP Cap Sheets Updated: 1/11 Quality You Can Trust From North America s Largest Roofing Manufacturer! www.gaf.com FireShield

More information

4411N 4411G 4412N 4412G

4411N 4411G 4412N 4412G Extreme Sealing Tape Technical Data October, 2011 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

Application Specification:

Application Specification: Application Specification: GacoFireStop2 F5001 (Half-Pound) March 2014 Supersedes 7/11 Division: 07 21 19 GUIDE SPECIFICATION GacoFireStop2 F5001 INSULATION PART 1 GENERAL This guide specification discusses

More information

SPECIA LT Y SEA LANT S

SPECIA LT Y SEA LANT S SPECIA LT Y SEA LANT S Novagard Flowable Sealants - 200 Series Description: Ideal for general industrial sealing and bonding applications requiring a flowable product, but retains enough thixotropy to

More information

Trusted ICC ES DIVISION: ATLANTA, CGF PRO, ENERGYS. Look. Conformity! Evaluation. ICC-ES Evaluation

Trusted ICC ES DIVISION: ATLANTA, CGF PRO, ENERGYS. Look. Conformity! Evaluation. ICC-ES Evaluation 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg DIVISION: 07 00 00 THERMAL AND MOISTURE PROTECTION SECTION: 07 21 00 THERMAL INSULATION

More information

3 Scotchmate TM. Nylon Reclosable Fasteners. Technical Data December, Plainbacked Products. Products

3 Scotchmate TM. Nylon Reclosable Fasteners. Technical Data December, Plainbacked Products. Products 3 Technical Data December, 2001 Products Plainbacked Products Loop Hook SJ-3401 SJ-3402 SJ-3418 SJ-3419 Pressure Sensitive Adhesive Products Loop Hook SJ-3518 SJ-3519 SJ-3523 SJ-3522 SJ-3527 SJ-3526 SJ-3571

More information

Roofing. Carrier Membrane SA. Self-adhesive Carrier Membrane. Product Description. Tests. Product Data. Form. Storage

Roofing. Carrier Membrane SA. Self-adhesive Carrier Membrane. Product Description. Tests. Product Data. Form. Storage Carrier Membrane SA Self-adhesive Carrier Membrane Product Description Carrier Membrane SA is a multi-layer self-adhesive membrane made of polymer modified bitumen with an aluminium foil/random fibre top

More information

MAKE ROOFS LAST LONGER

MAKE ROOFS LAST LONGER MAKE ROOFS LAST LONGER Roof Coatings & Roof Repair Single-Ply Metal Asphalt HIGHEST PERFORMING SYSTEMS. LOWEST APPLIED COST. METAL ROOF RESTORATION Metal Restoration Quick Guide Acrylic Polyurethane High

More information

LOCTITE HC AERO

LOCTITE HC AERO INTRODUCTION is a toughened 250 F/121 C curing, low density epoxy syntactic core material with superior moisture resistance. is co-curable with a wide variety of 250 F/121 C curing epoxy prepreg systems.

More information

AQUATITE. Also designed as: Crack/gap filler for masonry and unglazed ceramics Sealants against leaks Repairer for roof cracks and gutters

AQUATITE. Also designed as: Crack/gap filler for masonry and unglazed ceramics Sealants against leaks Repairer for roof cracks and gutters AQUATITE Revision Date: september 2007 Description Bondall AquaTite is a grey, brushable, waterproofing coating that forms a flexible yet tough, seamless membrane. This single pack product exceeds the

More information

SLAB ON GRADE Insul-Joint or Expansion Joint Material as Required by A/E Specifications AquaCheck Liquid Coating 400 (Waterproofing Membrane) with Aqu

SLAB ON GRADE Insul-Joint or Expansion Joint Material as Required by A/E Specifications AquaCheck Liquid Coating 400 (Waterproofing Membrane) with Aqu INSTALLATION INSTRUCTIONS Note: The following installation instructions are based off of ASTM E 1643 (Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular

More information

10 Steps to Save Energy in Your House

10 Steps to Save Energy in Your House 10 Steps to Save Energy in Your House Sealing and insulating your home is one of the most cost-effective ways to make your home more comfortable and energy efficient. You can do it yourself. In this chapter,

More information

RPR Insul-Mate Sheet and Roll Jacketing

RPR Insul-Mate Sheet and Roll Jacketing RPR Insul-Mate Sheet and Roll Jacketing ALUMINUM PRODUCTS Rolled Jacketing Sheeting (Flat and Corrugated) Cut to Length Cut & Rolled Width/Length: 36 and 48 wide 100, 50 and cut to length (thicker gauges

More information

Adhesive Transfer Tapes with

Adhesive Transfer Tapes with Adhesive Transfer Tapes with 8132LE 8153LE 9453LE 9471LE 9472LE 9653LE 9671LE 9672LE 9698LE Technical Data April, 2012 Product Description Tapes with 3M provides high bond strength to most surfaces, including

More information

Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP

Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Technical Data May 2017 Product Description 3M High Performance Acrylic Adhesive

More information

TECH SOLUTIONS Hot Box Testing of Four Different Metal Building Roof Assemblies Determines Insulation Efficiency

TECH SOLUTIONS Hot Box Testing of Four Different Metal Building Roof Assemblies Determines Insulation Efficiency Summary Using the ASTM 1363, or hot box test, four different metal roofing assemblies were tested to determine their effective R-value versus the design R-value of the insulation. The ratio of these two

More information

DATA SHEET FLASH TAPE 1

DATA SHEET FLASH TAPE 1 FLASH TAPE 1 FLASH TAPE 1 is a general-purpose high temperature, fully cured silicone adhesive tape. Designed for use primarily in plastic and bonding shops for flash control, masking, holding, or positioning.

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER:

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: AIR BARRIERS REPORT HOLDER: 0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 2717 Reissued 07/2015 This report is subject to renewal 07/2017. DIVISION: 07 00 00 THERMAL

More information

STANDARD FOR EXTRUDED INSULATION POWER CABLES RATED ABOVE 46 THROUGH 345 KV. Approved by AMERICAN NATIONAL STANDARDS INSTITUTE.

STANDARD FOR EXTRUDED INSULATION POWER CABLES RATED ABOVE 46 THROUGH 345 KV. Approved by AMERICAN NATIONAL STANDARDS INSTITUTE. ANSI/ICEA S-108-720-2012 STANDARD FOR EXTRUDED INSULATION POWER CABLES RATED ABOVE 46 THROUGH 345 KV Approved by AMERICAN NATIONAL STANDARDS INSTITUTE November 27, 2012 Publication # ANSI/ICEA S-108-720-2012

More information

About VentureClad Jacketing...

About VentureClad Jacketing... VentureClad About Venture Tape Quality ISO 9001:2008 Status Venture Tape is committed to providing the highest level of customer service. We strive to keep our customers up to date on order status, product

More information

TOPCOAT Restoration Specifications Structural Concrete

TOPCOAT Restoration Specifications Structural Concrete TOPCOAT Restoration Specifications Structural Concrete Updated: 1/11 Quality You Can Trust From North America s Largest Roofing Manufacturer! www.gaf.com TOPCOAT Restoration Specifications Structural Concrete

More information

SPECIFICATION GUIDELINES FOR THE USE OF CRYOGEL Z ON COLD PIPING AND EQUIPMENT

SPECIFICATION GUIDELINES FOR THE USE OF CRYOGEL Z ON COLD PIPING AND EQUIPMENT SPECIFICATION GUIDELINES FOR THE USE OF CRYOGEL Z ON COLD PIPING AND EQUIPMENT Page 1 of 15 Ver. 3-0 March 2010 TABLE OF CONTENTS 1. Scope... 3 2. General System Requirements... 3 3. Installation Details...

More information

AESTUVER fire-protection mastic For the AESTUVER expansion joint M

AESTUVER fire-protection mastic For the AESTUVER expansion joint M fermacell AESTUVER product data sheet For the AESTUVER expansion joint M Product is an elastic RTV-1 silicone combined with halogen-free fire retardants. Silicone is a versatile elastomer which is mainly

More information

Total Window. U-Factor. Total Window U Value. Duralite can improve. Warmer window. comfortable.

Total Window. U-Factor. Total Window U Value. Duralite can improve. Warmer window. comfortable. Total Window U Value 0.34 Total Window U-Factor 0.30 0.31 Duralite can improve the total window U-value. Duralite SuperSpacer Aluminum SB Warmer window U-values makes you feel more comfortable. Simulations

More information

1.2 Reference Standard: NOFMA - National Oak Flooring Manufacturers Association Grading Standards.

1.2 Reference Standard: NOFMA - National Oak Flooring Manufacturers Association Grading Standards. WOOD FLOORING GENERAL INFORMATION 1.1 This section applies to factory finished wood strip flooring. 1.2 Reference Standard: NOFMA - National Oak Flooring Manufacturers Association Grading Standards. 1.3

More information

REPORT HOLDER: THE DOW CHEMICAL COMPANY 1501 LARKIN CENTER DRIVE MIDLAND, MICHIGAN EVALUATION SUBJECT:

REPORT HOLDER: THE DOW CHEMICAL COMPANY 1501 LARKIN CENTER DRIVE MIDLAND, MICHIGAN EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3089 Reissued 07/2016 This report is subject to renewal 07/2018. DIVISION: 07 00

More information

Electrical Insulating Tapes

Electrical Insulating Tapes Electrical Insulating Tapes Energy, Mining, Industrial and Contractors applications LV and MV electrical jointing and termination applications Adhesive or Self-amalgamating UV resistant Cold and weather

More information

3 Scotchmate TM. Nylon Reclosable Fasteners. Product Selection Guide April, M Scotchmate Nylon Reclosable Fastener.

3 Scotchmate TM. Nylon Reclosable Fasteners. Product Selection Guide April, M Scotchmate Nylon Reclosable Fastener. 3 Product Selection Guide April, 2003 Products 3M Scotchmate Nylon Reclosable Fastener Plainbacked Products Loop Hook SJ3401 SJ3402 SJ3418FR SJ3419FR Pressure Sensitive Adhesive Products Unnapped Loop

More information

Typical Properties Specification Writers: These values are not intended for use in preparing specifications.

Typical Properties Specification Writers: These values are not intended for use in preparing specifications. Technical Data Sheet is a two-part, neutral-cure, RTV silicone sealant. Features & Benefits Approved for structural and weatherseal applications 1 Meets ASTM C719 Class 25 (G, A, O) Meets ASTM C1184 Structural

More information

Typical Properties. THERMATTACH Dielectric Thickness Thermal Material Strength Carrier Color inches (mm) Impedance Features/Typical Applications (Vac)

Typical Properties. THERMATTACH Dielectric Thickness Thermal Material Strength Carrier Color inches (mm) Impedance Features/Typical Applications (Vac) THERMATTACH Typical Applications bonding heat sinks to plastic packages (T410 and T411) bonding heat sinks to metal or ceramic packages (T404,T405 and T412) heat spreader to circuit board attachment (T413

More information

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960 STUC-O-FLEX PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960 PART 1 - GENERAL 1.01 DESCRIPTION Provide all labor, materials and equipment necessary

More information

SECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved

SECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved SECTION 08 87 13 WINDOW FILM Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security

More information

SECTION MANUFACTURED ROOF EXPANSION JOINTS

SECTION MANUFACTURED ROOF EXPANSION JOINTS SECTION 07 71 29 - MANUFACTURED ROOF EXPANSION JOINTS PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

INSTALLATION GUIDELINES for ISO-C1 POLYISOCYANURATE MECHANICAL INSULATION for LIQUEFIED NATURAL GAS (LNG) CRYOGENIC REFRIGERATION CHILLED WATER

INSTALLATION GUIDELINES for ISO-C1 POLYISOCYANURATE MECHANICAL INSULATION for LIQUEFIED NATURAL GAS (LNG) CRYOGENIC REFRIGERATION CHILLED WATER INSTALLATION GUIDELINES for ISO-C1 POLYISOCYANURATE MECHANICAL INSULATION for LIQUEFIED NATURAL GAS (LNG) CRYOGENIC REFRIGERATION CHILLED WATER Dyplast Products Copyright 2012 1 Rev 0112 DYPLAST PRODUCTS

More information

1 of 22. SSE Industries Sdn. Bhd. PP/PET Battery Strapping Tool. Pillow Type Biscuit Packaging Machine

1 of 22. SSE Industries Sdn. Bhd. PP/PET Battery Strapping Tool. Pillow Type Biscuit Packaging Machine SSE Industries Sdn. Bhd. PP/PET Battery Strapping Tool - Easy to use, light weight, high power electric design - Heavy duty, special construction design, easily to tension & strap - suitable for all industrial

More information

SECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM

SECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM PART 1- GENERAL 1.1 SUMMARY A. Section Includes: SECTION 084523 - SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM 1. Flat factory prefabricated structural insulated translucent sandwich panels; with glazed endwalls.

More information

SECTION HVAC GRAVITY VENTILATORS

SECTION HVAC GRAVITY VENTILATORS SECTION 23 37 23 HVAC GRAVITY VENTILATORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION PANEL AND POST AND PYLON SIGNAGE. 1. Non-illuminated Panel and Post signs. 2. Internal illumination Pylon (Cabinet and Post) signs.

SECTION PANEL AND POST AND PYLON SIGNAGE. 1. Non-illuminated Panel and Post signs. 2. Internal illumination Pylon (Cabinet and Post) signs. PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Non-illuminated Panel and Post signs. 2. Internal illumination Pylon (Cabinet and Post) signs. 1.2 PERFORMANCE REQUIREMENTS A. Structural

More information

TOPCOAT System Specifications Corrugated Transite Panels

TOPCOAT System Specifications Corrugated Transite Panels TOPCOAT System Specifications Corrugated Transite Panels Updated: 1/11 Quality You Can Trust From North America s Largest Roofing Manufacturer! www.gaf.com TOPCOAT System Specifications Corrugated Transite

More information

FP30112WHITE100 Heat Shrink TW Tubing 100' Spool

FP30112WHITE100 Heat Shrink TW Tubing 100' Spool FP30112WHITE100 Heat Shrink TW Tubing Minnesota Mining (3M) Catalog Number FP30112WHITE100 Manufacturer Minnesota Mining (3M) Description Tubing, Heat; ; 600 V; Cable Size 1/2 Inch; Thin Wall; Shrink Temperature

More information

Section BUILDINGS, SHELTERS, ENCLOSURES

Section BUILDINGS, SHELTERS, ENCLOSURES Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices

More information

G SPECIFICATION: EXTRUDED POLYOLEFIN COATING ON STEEL GAS PIPE VOLUME: 6. REVISION: (See ) 6/17/14 5 Years

G SPECIFICATION: EXTRUDED POLYOLEFIN COATING ON STEEL GAS PIPE VOLUME: 6. REVISION: (See ) 6/17/14 5 Years LAST REVIEW DATE: REVIEW CYCLE: 6/17/14 5 Years SPECIFICATION: TITLE: G-8062-9 EXTRUDED POLYOLEFIN COATING ON VOLUME: 6 REVISION: (See ) 1) Cover Page - Changed review cycle from 10 years to 5 years. 2)

More information

WATERPROOFING CONSTRUCTION JOINTS

WATERPROOFING CONSTRUCTION JOINTS WaterproofingSystems WATERPROOFING CONSTRUCTION JOINTS Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer 2C Contents Basics Connective, loadable and resilient: Joints in building

More information

Construction. S-Vap 5000E SA Self-adhesive Vapour Barrier. Product Description

Construction. S-Vap 5000E SA Self-adhesive Vapour Barrier. Product Description Roofing Product Data Sheet Edition 11.2014 / xtra UK Identification no. 02 09 45 05 100 0 000019 Version no. 03 S-Vap 5000E SA Self-adhesive Vapour Barrier Product Description S-Vap 5000E SA is a multi-layer

More information

***********************************************************************************

*********************************************************************************** AQUAFIN-2K/M Two-Component Cement-based Acrylic-based Waterproofing GUIDE AQUAFIN, Inc. SPECIFICATION PART 1 - GENERAL 1.1 SECTION INCLUDES SECTION 07 16 14 ACRYLIC MODIFIED (FLEXIBLE) CEMENTITIOUS WATERPROOFING

More information

NOMEX TYPE 410 TECHNICAL DATA SHEET. Electrical properties. Please note: PERFORM WHEN THE HEAT S ON TYPICAL ELECTRICAL PROPERTIES

NOMEX TYPE 410 TECHNICAL DATA SHEET. Electrical properties. Please note: PERFORM WHEN THE HEAT S ON TYPICAL ELECTRICAL PROPERTIES NOMEX TYPE 41 NOMEX Type 41 is a calendered insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. NOMEX Type 41 is the original form of NOMEX

More information

3 Thermally Conductive Tapes

3 Thermally Conductive Tapes 3 Thermally Conductive Tapes Technical Data July, 21 Product Description 3M Thermally Conductive Tapes 885, 881, and 8815 are designed to provide a preferential heat-transfer path between heat-generating

More information

Protech Regular 870 Radon Resisting Membrane

Protech Regular 870 Radon Resisting Membrane CI/SfB Ln9 CERTIFICATE NO. 05/0104 BSK, Commissioners Road, Strood, Rochester, Kent ME2 4ED, United Kingdom. Tel: 0044 1634 292700 Fax: 0044 1634 291029 Email: sales@bsk-laminating.com Website: www.bsk-laminating.com

More information

Originally Issued: 05/03/2013 Revised: 06/06/2016 Valid Through: 05/31/2017

Originally Issued: 05/03/2013 Revised: 06/06/2016 Valid Through: 05/31/2017 EVALUATION SUBJECT: AA-2 VAPOR SHIELD, M-SHIELD, SILVER SHIELD RADIANT BARRIER, FSK SHIELD, RBI SHIELD AND VR PLUS SHIELD REPORT HOLDER: Fi-Foil Company, Inc. P.O. Box 800 612 Bridgers Ave. West Auburndale,

More information

1. Rubberized asphalt waterproofing membrane, reinforced. 2. Molded sheet drainage panels. 3. Insulation. 4. Plaza deck pavers.

1. Rubberized asphalt waterproofing membrane, reinforced. 2. Molded sheet drainage panels. 3. Insulation. 4. Plaza deck pavers. SECTION 071413 HOT FLUID APPLIED RUBBERIZED ASPHALT WATERPROOFING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Rubberized asphalt waterproofing membrane, reinforced. 2. Molded sheet drainage panels.

More information

1. Division 23 Section "Hangers and Supports for HVAC Piping and Equipment" for pipe insulation shields and protection saddles.

1. Division 23 Section Hangers and Supports for HVAC Piping and Equipment for pipe insulation shields and protection saddles. SECTION 23 07 19 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

Double Coated Urethane Foam Tapes

Double Coated Urethane Foam Tapes 3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data June, 2008 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear

More information

Adhesive Transfer Tapes with Adhesive EK PC

Adhesive Transfer Tapes with Adhesive EK PC Adhesive Transfer Tapes with Adhesive 300 927 950 950EK 9458 9471 9471PC 9472 9671 9672 9673 9674 1-800-773-0062 www.marianinc.com Technical Data March 2016 Product Description Transfer Tapes with 300

More information

SECTION Solar Control Film WINDOW FILM. Copyright ARCAT, Inc. - All rights reserved

SECTION Solar Control Film WINDOW FILM. Copyright ARCAT, Inc. - All rights reserved SECTION 08 87 13 - Solar Control Film WINDOW FILM Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Sun control window film. (Prestige)(Ceramic)(Night Vision)(All

More information

SECTION JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS

SECTION JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS SECTION 07-9200 - JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100) ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society

More information

SECTION COLD APPLIED RUBBER MODIFIED ASPHALT WATERPROOFING

SECTION COLD APPLIED RUBBER MODIFIED ASPHALT WATERPROOFING P.O. Box 599 - Mars, PA 16046 800-321-3337 SECTION 07555 COLD APPLIED RUBBER MODIFIED ASPHALT WATERPROOFING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including

More information

PIPEWORK INSULATION. 14/ Page 1 of 10 Pipework Insulation Rev D

PIPEWORK INSULATION. 14/ Page 1 of 10 Pipework Insulation Rev D PIPEWORK INSULATION 14/10-2014 Page 1 of 10 Pipework Insulation Rev D Contents INTRODUCTION General Scope Surfaces to be Insulated Pumps, Turbines etc Performance Minimum Pipe Insulation Thickness Physical

More information